all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
TempConfidential GTK-XB90- manal C2 Fred Fabio IM UC2 FR 4697227111 Anki 2017-03 | Users Manual | 2.61 MiB | ||||
1 2 |
|
TempConfidential GTK-XB90- manal UC2 Fred Fabio IM UC2 4697227111 c2 2017-03-17 | Users Manual | 2.94 MiB | ||||
1 2 | Test Report | |||||||
1 2 | External Photos | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) |
1 2 | TempConfidential GTK-XB90- manal C2 Fred Fabio IM UC2 FR 4697227111 Anki 2017-03 | Users Manual | 2.61 MiB |
12) Utilisez uniquement le chariot, le pied, le trpied, le support ou la table recommand par le fabricant, ou vendu avec lappareil. Si vous placez lappareil sur un chariot, veillez le dplacer avec prcaution pour viter quun des deux lments ne bascule et ne vous blesse. 13) Dbranchez cet appareil pendant les orages ou au cours des longues priodes de non-utilisation. 14) Confiez toutes les rparations du personnel qualifi. Une rparation est ncessaire en cas de dtrioration, par exemple si le cordon dalimentation ou la prise secteur est endommag, si des corps trangers ou du liquide se sont introduits dans lappareil, si lappareil a t expos la pluie ou lhumidit, sil fonctionne mal ou sil est tomb. AVERTISSEMENT Afin de rduire les risques dincendie ou de choc lectrique, nexposez pas cet appareil la pluie ni lhumidit. Pour viter les risques dincendie, ne couvrez pas lorifice de ventilation de lappareil avec des journaux ou des nappes, des rideaux, etc. Ne placez pas lappareil proximit de flammes nues, telles que des bougies allumes. Pour viter les risques dincendie ou de dcharge lectrique, nexposez pas lappareil aux gouttes ou aux claboussures, et ne placez pas sur ce dernier dobjets contenant des liquides, tels que des vases. La fiche principale tant utilise pour dconnecter lappareil du secteur, branchez lappareil sur une prise secteur facilement accessible. Si vous constatez une anomalie de lappareil, dbranchez immdiatement la fiche principale de la prise secteur. Ninstallez pas lappareil dans un endroit exigu tel quune bibliothque ou un meuble encastr. Nexposez pas les batteries ou les quipements dans lesquelles des batteries sont installes une chaleur excessive, par exemple la lumire directe du soleil ou le feu. Lappareil nest pas dconnect du secteur tant quil est branch la prise secteur, mme si lappareil lui-mme a t teint. Doit tre utilis seulement lintrieur. Avis pour les clients situs aux tats-
Unis Enregistrement du propritaire Le numro de modle et de srie se trouvent larrire de lunit. Enregistrez ces numros dans lespace fourni ci-
dessous. Faites rfrence ces numros chaque fois que vous contactez votre revendeur Sony au sujet de ce produit. N de modle N de srie Instructions de scurit importantes 1) Lisez ces instructions. 2) Conservez ces instructions. 3) Tenez compte de tous les avertissements. 4) Suivez toutes les instructions. 5) Nutilisez pas cet appareil proximit deau. 6) Nettoyez-le uniquement avec un chiffon sec. 7) Ne bloquez aucune ouverture de ventilation. Effectuez linstallation conformment aux instructions du fabricant. 8) Ninstallez pas lquipement prs de sources de chaleur telles que des radiateurs, des bouches dair chaud, des cuisinires ou dautres appareils
(y compris les amplificateurs) qui gnrent de la chaleur. 9) Ne dtriorez pas le dispositif de scurit de la fiche polarise ou de terre. Une fiche polarise possde deux lames, dont lune est plus grosse que lautre. Une fiche de terre possde deux lames et une troisime broche de terre. La grosse lame ou la troisime broche sont prvues pour votre scurit. Si la fiche fournie ne rentre pas dans la prise, consultez un lectricien pour faire remplacer la prise obsolte. 10) Protgez le cordon dalimentation pour viter quil soit pitin ou pinc, notamment au niveau des fiches, des prises secteur et la sortie de lappareil. 11) Utilisez uniquement les attaches/
accessoires spcifis par le fabricant. 2FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Avis pour les clients situs aux tats-
Le numro de modle et de srie se trouvent larrire de lunit. Enregistrez ces numros dans lespace fourni ci-
dessous. Faites rfrence ces numros chaque fois que vous contactez votre revendeur Sony au sujet de ce produit. Instructions de scurit importantes 5) Nutilisez pas cet appareil proximit 6) Nettoyez-le uniquement avec un 7) Ne bloquez aucune ouverture de ventilation. Effectuez linstallation conformment aux instructions du 8) Ninstallez pas lquipement prs de sources de chaleur telles que des radiateurs, des bouches dair chaud, des cuisinires ou dautres appareils
(y compris les amplificateurs) qui 9) Ne dtriorez pas le dispositif de scurit de la fiche polarise ou de terre. Une fiche polarise possde grosse que lautre. Une fiche de terre possde deux lames et une troisime broche de terre. La grosse lame ou la troisime broche sont prvues pour votre scurit. Si la fiche fournie ne rentre pas dans la prise, consultez un lectricien pour faire remplacer la 10) Protgez le cordon dalimentation pour viter quil soit pitin ou pinc, notamment au niveau des fiches, des prises secteur et la sortie de 11) Utilisez uniquement les attaches/
accessoires spcifis par le fabricant. REMARQUE:
Cet quipement a t test et dclar conforme aux limites pour appareils numriques de classe B, selon la section 15 des rglements de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement produit, utilise et peut irradier une nergie de radiofrquence et, sil nest pas install et utilis conformment aux instructions, peut causer une interfrence nuisible pour les radiocommunications. Il nexiste toutefois aucune garantie que de telles interfrences ne se produiront pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles la rception des signaux de radio ou de tlvision, ce qui peut tre dtermin en allumant et en teignant lappareil, lutilisateur est invit essayer de corriger ces interfrences par lun des moyens suivants:
Rorienter ou dplacer lantenne rceptrice. Augmenter lespacement entre lquipement et le rcepteur. Brancher lquipement sur une prise de courant dun circuit autre que celui sur lequel le rcepteur est branch. Consulter le revendeur ou un technicien radio/TV qualifi pour obtenir de laide. ATTENTION Vous tes averti que tout changement ou toute modification non approuv expressment dans ce manuel peut annuler votre droit dutiliser cet quipement. Cet appareil ne doit pas tre plac prs dune autre antenne ou dun autre metteur, ni utilis avec ces quipements. Cet quipement est conforme aux limites dexposition aux rayonnements FCC nonces pour un environnement non contrl et il satisfait les recommandations en matire dexposition aux radiofrquences (RF) de la FCC. Cet quipement met de trs faibles niveaux dnergie de radiofrquence et il est jug conforme sans valuation dexposition maximale admissible. FR 3FR 12) Utilisez uniquement le chariot, le pied, le trpied, le support ou la table recommand par le fabricant, ou vendu avec lappareil. Si vous placez lappareil sur un chariot, veillez le dplacer avec prcaution pour viter quun des deux lments ne bascule et ne vous blesse. 13) Dbranchez cet appareil pendant les orages ou au cours des longues priodes de non-utilisation. 14) Confiez toutes les rparations du personnel qualifi. Une rparation est ncessaire en cas de dtrioration, par exemple si le cordon dalimentation ou la prise secteur est endommag, si des corps trangers ou du liquide se sont introduits dans lappareil, si lappareil a t expos la pluie ou lhumidit, sil fonctionne mal ou sil est tomb. Ce symbole est destin alerter lutilisateur de la prsence dune tension dangereuse non isole dans le botier de lappareil qui peut tre assez importante pour constituer un risque dlectrocution. Ce symbole est destin alerter lutilisateur de la prsence dinstructions dutilisation et dentretien importantes dans la documentation accompagnant lappareil. GTK-XB60/XB90.4-697-227-11(1) propos de ce manuel Certaines illustrations sont prsentes sous forme de dessins conceptuels et peuvent diffrer des quipements rels. Pour les clients situs au Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) lappareil ne doit pas produire de brouillage;
lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 2) Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre comme conforme sans valuation de lexposition maximale autorise. Ce systme est conu pour tre utilis aux fins suivantes:
Lire des sources musicales prsentes sur des priphriques BLUETOOTH Profiter dactivits sociales avec la Chane pour soire ou la fonction dajout denceinte 4FR GTK-XB60/XB90.4-697-227-11(1) Table des matires propos de ce manuel .............4 Guide des pices et commandes ...............................6 Rglage du son Rglage du son.........................17 Autres oprations Utilisation de la fonction Chane pour soire .................. 18 couter de la musique sans fil avec deux systmes (fonction Ajout denceinte) ......................21 couter de la musique avec les voyants des enceintes allums .................................... 24 Utilisation dun quipement facultatif ................................... 24 Rglage de la fonction de veille automatique .................. 24 Informations supplmentaires Informations sur les priphriques compatibles ..... 25 Guide de dpannage .............. 25 Prcautions .............................. 28 Spcifications ........................... 29 Avis concernant la licence et les marques commerciales ......31 Prparation Mise sous tension du systme......................................8 Transport du systme ................8 Positionnement du systme lhorizontale ...............................8 propos de la gestion de lnergie .....................................9 BLUETOOTH Pairage de ce systme avec un priphrique BLUETOOTH ....... 10 couter de la musique sur un priphrique BLUETOOTH ........ 11 Connexion BLUETOOTH une touche par NFC .........................12 propos de la technologie sans fil BLUETOOTH ................. 14 Lecture laide dun codec sonore de qualit leve
(AAC/LDAC) .......................... 14 Rglage du mode veille BLUETOOTH ..............................15 Activation ou dsactivation du signal BLUETOOTH ................... 16 Utilisation de SongPal via BLUETOOTH ............................. 16 5FR GTK-XB60/XB90.4-697-227-11(1) Guide des pices et commandes Haut Voyants des enceintes*
(page24) Arrire
* vitez de regarder directement les pices qui mettent de la lumire lorsque les voyants des enceintes sont allums. 6FR Touche (marche) Appuyez sur cette touche pour allumer ou teindre le systme. Indicateur (marche) Sallume en vert lorsque le Sallume en orange lorsque le Touche LIGHT (page24) Touche FUNCTION Appuyez plusieurs fois sur cette Lorsque la fonction BLUETOOTH Indicateur
(page14) Indicateur AUDIO IN (page24) Touche ADD (page21) Indicateurs ADD L/R (page21) Touche PARTY CHAIN (page20) Indicateur PARTY CHAIN
(page20) Touche EXTRA BASS Appuyez sur cette touche pour obtenir un son plus dynamique
(page17). Indicateur EXTRA BASS
(page17) Touches de volume +*/
Appuyez sur cette touche pour rgler le volume. Prise AC IN (page8) GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Touche (marche) Appuyez sur cette touche pour allumer ou teindre le systme. Indicateur (marche) Sallume en vert lorsque le systme est allum. Sallume en orange lorsque le systme est teint et lorsque le mode veille BLUETOOTH est activ. Touche LIGHT (page24) Touche FUNCTION PAIRING Appuyez plusieurs fois sur cette touche pour slectionner la fonction BLUETOOTH ou Entre audio. Lorsque la fonction BLUETOOTH est slectionne, maintenez la touche enfonce pour activer le pairage BLUETOOTH.
* vitez de regarder directement les pices qui mettent de la lumire lorsque les voyants Indicateur
(BLUETOOTH)
(page14) Indicateur AUDIO IN (page24)
(Marque-N) (page13) Touche ADD (page21) Indicateurs ADD L/R (page21) Touche PARTY CHAIN (page20) Indicateur PARTY CHAIN
(page20) Touche EXTRA BASS Appuyez sur cette touche pour obtenir un son plus dynamique
(page17). Indicateur EXTRA BASS
(page17) Touches de volume +*/
Appuyez sur cette touche pour rgler le volume. Prise AC IN (page8) GTK-XB60/XB90.4-697-227-11(1) Prises dentre et de sortie audio Utilisez un cordon audio (non fourni) pour tablir une connexion comme suit:
Prises AUDIO/PARTY CHAIN OUT L/R Se raccordent aux prises dentre audio dun quipement facultatif. Se raccordent un autre systme audio pour profiter de la fonction Chane pour soire (page18). Prises AUDIO/PARTY CHAIN IN L/R Se raccordent aux prises de sortie audio dun tlviseur ou dun quipement audio/
vido. Le son est mis par ce systme. Se raccordent un autre systme audio pour profiter de la fonction Chane pour soire (page18).
* La touche de volume + de lunit prsente un point tactile. Utilisez ce point tactile comme repre lorsque vous commandez le systme. tats des indicateurs Les tats des indicateurs de lunit sont prsents dans les illustrations suivantes. tat de lindicateur Illustration Clignotant Allum fixement teint 7FR Transport du systme Avant de transporter le systme, dconnectez tous les cordons. Prparation Mise sous tension du systme 1 Connectez le cordon dalimentation secteur
(fourni) la prise AC IN situe larrire de lunit, puis la prise murale. propos de la gestion de lnergie Par dfaut, ce systme se dsactive automatiquement aprs environ 15 minutes dinactivit, et si aucun signal audio nest dtect. Pour des informations dtailles, voir Rglage de la fonction de veille automatique
(page24). Remarque Il est trs important de bien positionner les mains lors du dplacement du systme pour viter des blessures personnelles et/
ou un endommagement du matriel. Positionnement du systme lhorizontale Vous pouvez galement positionner le systme lhorizontale comme illustr ci-
dessous. (Placez vers le bas le ct dot des pieds en caoutchouc.) Cordon dalimentation secteur (fourni) Vers la prise murale Le systme sallume en mode dmonstration et la dmonstration dmarre automatiquement. 2 Appuyez sur pour allumer le systme. Lindicateur sallume fixement en vert. Dsactivation de la dmonstration Appuyez sur LIGHT pendant lexcution de la dmonstration. La dmonstration sarrte et le systme passe en mode veille. Lorsque vous appuyez sur LIGHT en mode veille, ou si vous dconnectez et reconnectez le cordon dalimentation secteur, le systme passe en mode dmonstration. 8FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) propos de la gestion de lnergie Par dfaut, ce systme se dsactive automatiquement aprs environ 15 minutes dinactivit, et si aucun signal audio nest dtect. Pour des informations dtailles, voir Rglage de la fonction de veille automatique
(page24). Il est trs important de bien positionner les mains lors du dplacement du systme pour viter des blessures personnelles et/
systme lhorizontale Vous pouvez galement positionner le systme lhorizontale comme illustr ci-
dessous. (Placez vers le bas le ct dot des GTK-XB60/XB90.4-697-227-11(1) P r p a r a t i o n 9FR 3 Maintenez enfonc PAIRING pendant FUNCTION au moins 3secondes. Lindicateur clignote rapidement.
(BLUETOOTH) 4 Effectuez la procdure de pairage sur le priphrique BLUETOOTH. Pour des informations dtailles, reportez-vous au mode demploi de votre priphrique BLUETOOTH. 5 Slectionnez GTK-XB60/XB90 sur lcran du priphrique BLUETOOTH. Remarque Si une cl de passe est requise sur le priphrique BLUETOOTH, entrez 0000 . La cl de passe est parfois appele code de passe , code PIN , numro PIN ou mot de passe . 6 Effectuez la connexion BLUETOOTH sur le priphrique BLUETOOTH. Une fois le pairage effectu et la connexion BLUETOOTH tablie, lindicateur de lunit cesse de clignoter et sallume fixement. Selon le priphrique BLUETOOTH, la connexion peut dmarrer automatiquement une fois le pairage termin. Remarques Vous pouvez effectuer le pairage dun maximum de 8 priphriques BLUETOOTH. Si un 9e priphrique BLUETOOTH est inclus au pairage, le priphrique le plus anciennement associ est supprim. Si vous voulez effectuer un pairage avec un autre priphrique BLUETOOTH, rptez les tapes 1 6. Pour annuler lopration de pairage Appuyez sur FUNCTION Effacement de toutes les informations denregistrement de pairage Pour effacer toutes les informations denregistrement de pairage, vous devez rtablir les rglages dusine par dfaut du systme. Voir Rinitialisation du systme
(page27). BLUETOOTH Pairage de ce systme avec un priphrique BLUETOOTH Le pairage est une opration qui permet des priphriques BLUETOOTH de senregistrer mutuellement au pralable. Une fois quune opration de pairage est excute, il est inutile de la rexcuter. Si votre priphrique est un smartphone compatible NFC, la procdure de pairage manuel est inutile. (Voir Connexion BLUETOOTH une touche par NFC (page12).) 1 Placez le priphrique BLUETOOTH dans un rayon dun mtre (3 pieds) du systme. 2 Slectionnez la fonction BLUETOOTH. Appuyez sur pour allumer le systme. Appuyez plusieurs fois sur FUNCTION que lindicateur de lunit clignote lentement. PAIRING jusqu ce
(BLUETOOTH) Astuces Lorsquil ny a aucune information de pairage sur le systme (par exemple, la premire fois que vous utilisez la fonction BLUETOOTH aprs lachat),
(BLUETOOTH) clignote lindicateur rapidement lcran et le systme passe automatiquement en mode de pairage. Dans ce cas, passez ltape4. Si la connexion BLUETOOTH est tablie, interrompez-la (page12). 10FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) PAIRING pendant pairage sur le priphrique Pour des informations dtailles, reportez-vous au mode demploi de votre priphrique BLUETOOTH. GTK-XB60/XB90 sur lcran du priphrique BLUETOOTH. le priphrique BLUETOOTH, entrez 0000 . La cl de passe est parfois appele code de passe , code PIN , numro PIN ou mot de passe . couter de la musique sur un priphrique BLUETOOTH Vous pouvez commander un priphrique BLUETOOTH en connectant le systme et le priphrique BLUETOOTH laide dAVRCP. Vrifiez les points suivants avant de lire de la musique :
La fonction BLUETOOTH du priphrique BLUETOOTH est active. Le pairage est termin (page10). Une fois le systme et le priphrique BLUETOOTH connects, vous pouvez contrler la lecture en utilisant le priphrique BLUETOOTH. 1 Appuyez plusieurs fois PAIRING sur FUNCTION jusqu ce que lindicateur
(BLUETOOTH) de lunit sallume fixement. 2 tablissez la connexion avec le priphrique BLUETOOTH. Le dernier priphrique BLUETOOTH connect est automatiquement connect. Excutez la connexion BLUETOOTH partir du priphrique BLUETOOTH si celui-ci nest pas connect. B L U E T O O T H 11FR 6 Effectuez la connexion BLUETOOTH sur le priphrique BLUETOOTH. Une fois le pairage effectu et la connexion BLUETOOTH tablie, lindicateur de lunit cesse de clignoter et sallume fixement.
(BLUETOOTH) Selon le priphrique BLUETOOTH, la connexion peut dmarrer automatiquement une fois le pairage termin. Remarques Vous pouvez effectuer le pairage dun maximum de 8 priphriques BLUETOOTH. Si un 9e priphrique BLUETOOTH est inclus au pairage, le priphrique le plus anciennement associ est supprim. Si vous voulez effectuer un pairage avec un autre priphrique BLUETOOTH, rptez les tapes 1 6. Pour annuler lopration de pairage Appuyez sur FUNCTION PAIRING. Effacement de toutes les informations denregistrement de pairage Pour effacer toutes les informations denregistrement de pairage, vous devez rtablir les rglages dusine par dfaut du systme. Voir Rinitialisation du systme
(page27). GTK-XB60/XB90.4-697-227-11(1) 1 Activez la fonction NFC du priphrique BLUETOOTH. 2 Mettez en contact le priphrique BLUETOOTH, par exemple un smartphone ou une tablette, avec la marque-N de lunit jusqu ce que le priphrique BLUETOOTH vibre. Terminez la connexion en suivant les instructions qui saffichent sur le priphrique BLUETOOTH. Une fois la connexion BLUETOOTH tablie, lindicateur de lunit cesse de clignoter et sallume fixement. 3 Dmarrez la lecture dune source audio sur le priphrique BLUETOOTH. Pour des informations dtailles, reportez-vous au mode demploi de votre priphrique BLUETOOTH. 4 Rglez le volume. Rglez dabord le volume sur le priphrique BLUETOOTH. Si le niveau du volume est encore trop bas, rglez-le sur le systme laide des touches de volume +/. Priphrique BLUETOOTH Connexion BLUETOOTH une touche par NFC NFC (Near Field Communication) est une technologie qui permet diffrents priphriques, tels que des smartphones et des puces lectroniques, de communiquer sans fil courte porte. Lorsque vous touchez le systme avec un smartphone compatible NFC, le systme effectue automatiquement:
lactivation de la fonction BLUETOOTH. lexcution du pairage et ltablissement de la connexion BLUETOOTH. Smartphones compatibles Les smartphones qui intgrent une fonction NFC (SE: Android 2.3.3 ou suprieur, sauf Android 3.x) Remarques Le systme peut reconnatre et se connecter seulement un smartphone compatible NFC la fois. Si vous essayez de connecter un autre smartphone compatible NFC au systme, le smartphone compatible NFC actuellement connect est dconnect. Selon le smartphone compatible NFC, vous devrez peut-tre effectuer lavance les tapes suivantes sur votre smartphone compatible NFC. Activez la fonction NFC. Pour des informations dtailles, reportez-vous au mode demploi du smartphone compatible NFC. Si la version du systme dexploitation de votre smartphone compatible NFC est antrieure Android 4.1.x, tlchargez et dmarrez lapplication Connexion NFC facile. Connexion NFC facile est une application gratuite pour les smartphones Android que vous pouvez tlcharger sur Google Play.
(Lapplication peut tre indisponible dans certains pays/rgions.) Remarque Si vous essayez de connecter un autre priphrique BLUETOOTH au systme, le priphrique BLUETOOTH actuellement connect est dconnect. Pour mettre fin la connexion BLUETOOTH PAIRING pendant au Maintenez enfonc FUNCTION moins 3secondes. Avec certains priphriques BLUETOOTH, la connexion BLUETOOTH peut tre automatiquement interrompue lorsque vous arrtez la lecture. 12FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Connexion BLUETOOTH 1 Activez la fonction NFC du priphrique BLUETOOTH. est une technologie qui permet diffrents priphriques, tels que lectroniques, de communiquer sans Lorsque vous touchez le systme avec un smartphone compatible NFC, le systme effectue automatiquement:
ltablissement de la connexion une fonction NFC (SE: Android connecter seulement un smartphone compatible NFC la fois. Si vous essayez smartphone compatible NFC actuellement Selon le smartphone compatible NFC, vous devrez peut-tre effectuer lavance les tapes suivantes sur votre smartphone informations dtailles, reportez-vous au mode demploi du smartphone Si la version du systme dexploitation lapplication Connexion NFC facile. pouvez tlcharger sur Google Play.
(Lapplication peut tre indisponible 2 Mettez en contact le priphrique BLUETOOTH, par exemple un smartphone ou une tablette, avec la marque-N de lunit jusqu ce que le priphrique BLUETOOTH vibre. Terminez la connexion en suivant les instructions qui saffichent sur le priphrique BLUETOOTH. Une fois la connexion BLUETOOTH tablie, lindicateur de lunit cesse de clignoter et sallume fixement.
(BLUETOOTH) 3 Dmarrez la lecture dune source audio sur le priphrique BLUETOOTH. Pour des informations dtailles, reportez-vous au mode demploi de votre priphrique BLUETOOTH. B L U E T O O T H 4 Rglez le volume. Rglez dabord le volume sur le priphrique BLUETOOTH. Si le niveau du volume est encore trop bas, rglez-le sur le systme laide des touches de volume +/. Priphrique BLUETOOTH Astuce Si le pairage et la connexion BLUETOOTH chouent, procdez comme suit:
Si vous utilisez un tui vendu dans le commerce, retirez le smartphone de celui-ci. Avec le smartphone, touchez nouveau la Marque-N de lunit. Relancez lapplication Connexion NFC facile . Pour interrompre la connexion BLUETOOTH Avec le priphrique BLUETOOTH, touchez nouveau la Marque-N de lunit. 13FR GTK-XB60/XB90.4-697-227-11(1) propos de la technologie sans fil BLUETOOTH La technologie sans fil BLUETOOTH est une technologie courte porte qui permet des priphriques numriques dchanger des donnes sans fil. La technologie sans fil BLUETOOTH fonctionne dans un rayon denviron 10 mtres (33 pieds). Version, profils et codecs BLUETOOTH pris en charge Pour des informations dtailles, voir Section BLUETOOTH (page30). Indicateur
(BLUETOOTH) tat de lindicateur Clignotement lent Lindicateur
(BLUETOOTH) de lunit sallume fixement ou clignote en bleu pour indiquer ltat BLUETOOTH. tat systme Veille BLUETOOTH Pairage BLUETOOTH La connexion BLUETOOTH est tablie Clignotement rapide Allum fixement LDAC est une technologie de codage audio dveloppe par Sony qui permet de transmettre un contenu audio haute rsolution (Hi-
Res), y compris via une connexion BLUETOOTH. Contrairement dautres technologies de codage compatibles BLUETOOTH, par exemple SBC, elle fonctionne sans rduction de la qualit du contenu audio haute rsolution1). Elle permet galement de transmettre environ trois fois plus de donnes2) que les autres technologies sur un rseau sans fil BLUETOOTH avec une qualit sonore sans prcdent grce un codage efficace et un regroupement des donnes optimis. 1) Sauf le contenu au format DSD. 2) Par rapport SBC (Sub Band Codec), lorsque la vitesse de transmission de 990 kbit/s (96/48 kHz) ou 909 kbit/s
(88,2/44,1 kHz) est slectionne. Lecture laide dun codec sonore de qualit leve (AAC/LDAC) Ce systme peut recevoir des donnes au format de codec AAC ou LDAC partir dun priphrique BLUETOOTH. Il offre une lecture dont la qualit sonore est suprieure. Vous pouvez slectionner une option de code audio parmi les deux rglages suivants en utilisant SongPal
(page16). Le paramtre par dfaut de ce systme est AUTO . Pour appliquer les changements de rglage, vous devez interrompre la connexion BLUETOOTH (page12), puis la rexcuter. AUTO: Le systme dtecte le codec utilis sur le priphrique source, puis il slectionne automatiquement le codec optimal entre SBC , AAC* ou LDAC* . SBC: SBC est toujours appliqu quel que soit le codec utilis sur le priphrique source.
* Disponible uniquement lorsque le codec est pris en charge par votre priphrique BLUETOOTH. Remarque Vous pouvez bnficier dune qualit sonore suprieure lorsque le priphrique source est compatible avec AAC/LDAC et que cette fonction est rgle sur AUTO. Toutefois, le son peut tre interrompu selon les conditions de la communication BLUETOOTH. Si cela arrive, rglez la fonction sur SBC . 14FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) LDAC est une technologie de codage audio dveloppe par Sony qui permet de transmettre un contenu audio haute rsolution (Hi-
Res), y compris via une connexion BLUETOOTH. Contrairement dautres technologies de codage compatibles BLUETOOTH, par exemple SBC, elle fonctionne sans rduction de la qualit du contenu audio haute rsolution1). Elle permet galement de transmettre environ trois fois plus de donnes2) que les autres technologies sur un rseau sans fil BLUETOOTH avec une qualit sonore sans prcdent grce un codage efficace et un regroupement des donnes optimis. 1) Sauf le contenu au format DSD. 2) Par rapport SBC (Sub Band Codec), lorsque la vitesse de transmission de 990 kbit/s (96/48 kHz) ou 909 kbit/s
(88,2/44,1 kHz) est slectionne. Rglage du mode veille BLUETOOTH Le mode veille BLUETOOTH permet au systme de sallumer automatiquement lorsque vous tablissez la connexion BLUETOOTH avec un priphrique BLUETOOTH. Par dfaut, ce rglage est dsactiv. Il ne peut tre configur quen utilisant SongPal . Pour des informations dtailles sur SongPal, voir Utilisation de SongPal via BLUETOOTH (page16). Astuce Dsactivez le mode de veille BLUETOOTH pour rduire la consommation dnergie en mode veille (mode co). B L U E T O O T H codec sonore de qualit Ce systme peut recevoir des donnes au format de codec AAC ou LDAC partir dun priphrique BLUETOOTH. Il offre une lecture dont la qualit Vous pouvez slectionner une option de code audio parmi les deux rglages
(page16). Le paramtre par dfaut Pour appliquer les changements de rglage, vous devez interrompre la connexion BLUETOOTH (page12), AUTO: Le systme dtecte le codec utilis sur le priphrique source, puis il slectionne automatiquement SBC: SBC est toujours appliqu quel que soit le codec utilis sur le
* Disponible uniquement lorsque le codec est pris en charge par votre priphrique sonore suprieure lorsque le priphrique source est compatible avec AAC/LDAC et que cette fonction est rgle sur AUTO. selon les conditions de la communication BLUETOOTH. Si cela arrive, rglez la fonction 15FR GTK-XB60/XB90.4-697-227-11(1) Pour plus de dtails, reportez-vous laide de SongPal. http://info.songpal.sony.net/help/
Remarques Si lapplication SongPal fonctionne mal, interrompez la connexion BLUETOOTH
(page12), puis rexcutez-la, de sorte quelle fonctionne normalement. Ce que vous pouvez commander avec SongPal varie selon le priphrique connect. Les caractristiques et la conception de lapplication peuvent changer sans pravis. Activation ou dsactivation du signal BLUETOOTH Vous pouvez vous connecter au systme partir dun priphrique BLUETOOTH associ dans toutes les fonctions lorsque le signal BLUETOOTH du systme est activ. Par dfaut, ce rglage est activ. Maintenez FUNCTION et la touche de volume +
enfoncs pendant au moins 5secondes. PAIRING Remarque Vous ne pouvez pas excuter les oprations suivantes lorsque vous dsactivez le signal BLUETOOTH:
Pairage et/ou connexion avec un priphrique BLUETOOTH Utilisation de SongPal via BLUETOOTH Pour activer le signal BLUETOOTH, rptez la procdure prsente ci-dessus. Utilisation de SongPal via BLUETOOTH propos de lapp Vous pouvez commander le systme laide de lapp gratuite SongPal disponible dans Google Play et dans lApp Store. Recherchez SongPal ou scannez le code bidimensionnel ci-dessous, puis tlchargez lapp pour en savoir plus sur les fonctions pratiques. Le tlchargement de SongPal sur votre smartphone/iPhone offre les fonctions suivantes. Rglage du son (EQ) Vous pouvez rgler le son en choisissant entre de nombreux prrglages dgaliseur. Cration dune ambiance de fte
(DJ EFFECT) Vous pouvez contrler le son de manire dynamique en slectionnant un des 3 effets disponibles
(FLANGER/ISOLATOR/WAH). Configuration des rglages sur le systme Vous pouvez configurer les diffrents rglages sur le systme, par exemple le mode de veille automatique, etc. Configuration des rglages de la fonction BLUETOOTH Vous pouvez configurer les diffrents rglages de la fonction BLUETOOTH, par exemple les codecs audio BLUETOOTH, le mode veille BLUETOOTH, etc. 16FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Utilisation de SongPal Pour plus de dtails, reportez-vous laide de SongPal. http://info.songpal.sony.net/help/
Rglage du son Rglage du son Remarques Si lapplication SongPal fonctionne mal, interrompez la connexion BLUETOOTH
(page12), puis rexcutez-la, de sorte quelle fonctionne normalement. Ce que vous pouvez commander avec SongPal varie selon le priphrique connect. Les caractristiques et la conception de lapplication peuvent changer sans pravis. Pour Ajuster le volume Gnrer un son plus dynamique Faites cela Appuyez sur les touches de volume
+/. Appuyez sur EXTRA BASS. Lindicateur EXTRA BASS sallume en rouge lorsque la fonction EXTRA BASS est active. Vous pouvez commander le systme laide de lapp gratuite SongPal disponible dans Google Play et dans lApp Store. Recherchez SongPal ou scannez le code bidimensionnel ci-dessous, puis tlchargez lapp pour en savoir plus sur les fonctions Le tlchargement de SongPal sur votre smartphone/iPhone offre les Vous pouvez rgler le son en choisissant Cration dune ambiance de fte manire dynamique en slectionnant Configuration des rglages sur le Vous pouvez configurer les diffrents rglages sur le systme, par exemple le Configuration des rglages de la Vous pouvez configurer les diffrents rglages de la fonction BLUETOOTH, par exemple les codecs audio BLUETOOTH, l R g a g e d u s o n 17FR GTK-XB60/XB90.4-697-227-11(1) Autres oprations Utilisation de la fonction Chane pour soire Vous pouvez connecter plusieurs systmes audio dans une chane pour crer un environnement festif plus intressant et obtenir une puissance sonore plus leve. Un systme activ de la chane joue le rle dhte de soire et partagera la musique. Les autres systmes deviennent des invits de soire et jouent la mme musique que celle qui est joue par lhte de soire . Si lun des systmes nest pas dot de la fonction Chane pour soire Exemple: Lors de la connexion avec ce systme comme premier systme Configuration de la Chane pour soire Dernier systme*
Configurez une chane pour soire en connectant tous les systmes laide de cordons audio (non fournis). Avant de connecter les cordons, pensez dconnecter le cordon dalimentation secteur. Si tous les systmes sont quips de la fonction Chane pour soire Exemple: Lors de la connexion avec ce systme comme premier systme
* Connectez le systme qui nest pas dot de la fonction Chane pour soire au dernier systme. Pensez slectionner la fonction Entre audio sur ce dernier systme. Le dernier systme nest pas connect au premier. Vous devez slectionner le premier systme comme hte de soire de sorte que tous les systmes jouent la mme musique lorsque la fonction Chane pour soire est active. Continuez la connexion jusquau dernier systme. Dernier systme Deuxime systme Premier systme Le dernier systme doit tre connect au premier. Nimporte quel systme peut devenir un hte de soire. Vous pouvez changer lhte de soire en slectionnant un autre systme prsent dans la chane. Pour des informations dtailles, voir Pour slectionner un nouvel hte de soire (page20). Vrifiez que la fonction
(BLUETOOTH) est slectionne. Lorsque la fonction Entre audio est slectionne, la fonction Chane pour soire ne peut pas tre active. 18FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Si lun des systmes nest pas dot de la fonction Chane pour soire Exemple: Lors de la connexion avec ce systme comme premier systme Vous pouvez connecter plusieurs systmes audio dans une chane pour crer un environnement festif plus intressant et obtenir une puissance sonore plus leve. Un systme activ de la chane joue le rle dhte de soire et partagera la musique. Les autres systmes deviennent des invits de soire et jouent la Configurez une chane pour soire en connectant tous les systmes laide de Avant de connecter les cordons, pensez dconnecter le cordon dalimentation Continuez la connexion jusquau dernier systme. Dernier systme*
Deuxime systme Premier systme
* Connectez le systme qui nest pas dot de la fonction Chane pour soire au dernier systme. Pensez slectionner la fonction Entre audio sur ce dernier systme. Le dernier systme nest pas connect au premier. Vous devez slectionner le premier systme comme hte de soire de sorte que tous les systmes jouent la mme musique lorsque la fonction Chane pour soire est active. prsent dans la chane. Pour des informations dtailles, voir Pour slectionner
(BLUETOOTH) est slectionne. Lorsque la fonction Entre audio est slectionne, la fonction Chane pour soire ne peut pas tre GTK-XB60/XB90.4-697-227-11(1) A u t r e s o p r a t i o n s 19FR couter de la musique sans fil avec deux systmes (fonction Ajout denceinte) Pour cette fonction, deux systmes GTK-XB60/XB90 sont requis. En connectant deux systmes GTK-XB60/XB90 via BLUETOOTH, vous pouvez obtenir une coute plus puissante de la musique. Vous pouvez galement slectionner une sortie audio entre le double mode (les deux systmes jouent le mme son) et le mode stro (son stro). Dans les tapes ci-dessous, les deux systmes sont dcrits comme systme (ou systme matre) et systme . Activation de la fonction dajout denceinte 1 Rapprochez deux systmes GTK-XB60/XB90 un mtre (3 pieds) lun de lautre. 2 Appuyez plusieurs fois sur FUNCTION systme jusqu ce que lindicateur lunit sallume fixement. Pour slectionner un nouvel hte de soire Ce nest que lorsque vous vous connectez laide de (page18) que vous pouvez slectionner un nouvel hte de soire. Rptez ltape 3 de Utilisation de la fonction Chane pour soire sur le systme utiliser comme nouvel hte de soire. Lhte de soire actuel devient automatiquement invit de soire. Tous les systmes jouent la mme musique que celle joue par le nouvel hte de soire. Remarques Vous pouvez slectionner un autre systme comme hte de soire seulement aprs avoir activ la fonction Chane pour soire sur tous les systmes de la chane. Si le systme slectionn ne devient pas un nouvel hte de soire aprs quelques secondes, rptez ltape 3 dans Utilisation de la fonction Chane pour soire . Pour dsactiver la fonction Chane pour soire Appuyez sur PARTY CHAIN sur lhte de soire. Remarque Si la fonction Chane pour soire ne se dsactive pas aprs quelques secondes, appuyez nouveau sur PARTY CHAIN sur lhte de soire. Indicateur Chane pour soire Lindicateur Chane pour soire de lunit sallume fixement ou clignote pour indiquer ltat du systme. tat systme Hte de soire Invit de soire tat de lindicateur Allum fixement Clignotant Utilisation de la fonction Chane pour soire 1 Branchez le cordon dalimentation secteur et mettez sous tension tous les systmes. 2 Rglez le volume sur chaque systme. 3 Activez la fonction Chane pour soire sur le systme utiliser comme hte de soire. Exemple: Lorsque vous utilisez ce systme comme hte de soire Appuyez plusieurs fois sur FUNCTION PAIRING pour slectionner la fonction de votre choix. Lorsque vous vous connectez laide de (page18), ne slectionnez pas la fonction Entre audio. Si vous slectionnez cette fonction, le son ne peut pas tre mis. Dmarrez la lecture, puis appuyez sur PARTY CHAIN. Lindicateur PARTY CHAIN sallume. Lhte de soire dmarre la chane pour soire, et les autres systmes deviennent automatiquement des invits de soire. Tous les systmes jouent la mme musique que celle joue par lhte de soire. Remarques Selon le nombre total de systmes connects, les invits de soire peuvent avoir besoin de temps pour commencer lire la musique. Changer le niveau de volume et leffet sonore de lhte de soire naffecte pas le son mis par les invits de soire. Pour connatre le fonctionnement dtaill des autres systmes, consultez leurs modes demploi. 20FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Pour slectionner un nouvel hte de connectez laide de (page18) que vous pouvez slectionner un ltape 3 de Utilisation de la fonction Chane pour soire sur le systme soire. Lhte de soire actuel devient automatiquement invit de soire. Tous les systmes jouent la mme musique que celle joue par le nouvel systme comme hte de soire seulement aprs avoir activ la fonction Chane pour soire sur tous les systmes de la chane. Si le systme slectionn ne devient quelques secondes, rptez ltape 3 dans Utilisation de la fonction Chane pour Pour dsactiver la fonction Chane Appuyez sur PARTY CHAIN sur lhte Si la fonction Chane pour soire ne se dsactive pas aprs quelques secondes, appuyez nouveau sur PARTY CHAIN sur Lindicateur Chane pour soire de lunit sallume fixement ou clignote tat de lindicateur Allum fixement 3 Maintenez enfonc ADD sur le systme jusqu ce que les indicateurs ADD L/R de lunit clignotent. Le systme passe en mode dajout denceinte. 4 Appuyez plusieurs fois sur FUNCTION PAIRING sur le systme jusqu ce que lindicateur lunit sallume fixement.
(BLUETOOTH) de A u t r e s o p r a t i o n s couter de la musique sans fil avec deux systmes (fonction Ajout denceinte) Pour cette fonction, deux systmes GTK-XB60/XB90 sont requis. En connectant deux systmes GTK-XB60/XB90 via BLUETOOTH, vous pouvez obtenir une coute plus puissante de la musique. Vous pouvez galement slectionner une sortie audio entre le double mode (les deux systmes jouent le mme son) et le mode stro (son stro). Dans les tapes ci-dessous, les deux systmes sont dcrits comme systme (ou systme matre) et systme . Activation de la fonction dajout denceinte 1 Rapprochez deux systmes GTK-XB60/XB90 un mtre (3 pieds) lun de lautre. 2 Appuyez plusieurs fois sur FUNCTION PAIRING sur le systme jusqu ce que lindicateur lunit sallume fixement.
(BLUETOOTH) de 21FR GTK-XB60/XB90.4-697-227-11(1) 5 Maintenez enfonc ADD sur le systme jusqu ce que les indicateurs ADD L/R de lunit clignotent. Ltat des indicateurs L/R des deux systmes change de clignotant allum fixement tandis que lindicateur systme steint.
(BLUETOOTH) du 6 Appuyez plusieurs fois sur ADD sur le systme pour slectionner le mode de sortie. Les indicateurs ADD L/R des deux systmes signalent le mode de sortie actuel. Chaque fois que vous appuyez sur ADD, le mode de sortie change comme suit.
: Mode double (stro/stro)
: Mode stro (canal G/canal D)
: Mode stro (canal D/canal G) Astuce Pour changer le mode de sortie, utilisez le systme (systme matre), sur lequel vous avez activ le mode dajout denceinte. Astuce Lorsque la connexion effectue par la fonction dajout denceinte stablit trs rapidement, les indicateurs L/R du systme peuvent sallumer directement sans clignoter. 22FR Lecture de musique avec deux systmes 1 Activez le mode de pairage sur le systme , puis effectuez la connexion BLUETOOTH avec un priphrique BLUETOOTH. Pour des informations dtailles sur le pairage, voir Pairage de ce systme avec un priphrique BLUETOOTH (page10) ou Connexion BLUETOOTH une touche par NFC (page12). Pensez associer par pairage le priphrique BLUETOOTH avec le systme (systme matre). 2 Dmarrez la lecture sur le priphrique BLUETOOTH, puis rglez le volume. Pour des informations dtailles, voir couter de la musique sur un priphrique BLUETOOTH
(page11). Le rglage du volume effectu sur lun des systmes est galement appliqu lautre systme. Remarques Si un ou plusieurs autres priphriques BLUETOOTH, par exemple une souris BLUETOOTH ou un clavier BLUETOOTH, sont connects au priphrique BLUETOOTH en cours de connexion avec le systme, une distorsion sonore ou du bruit peut tre mis par le systme. Dans ce cas, interrompez la connexion BLUETOOTH entre le priphrique BLUETOOTH et le ou les autres priphriques BLUETOOTH. Si vous rinitialisez lun des deux systmes alors que la fonction dajout denceinte est active, pensez mettre hors tension lautre systme. Si vous ne mettez pas hors tension lautre systme avant de redmarrer la fonction dajout denceinte, le systme risque de rencontrer des problmes pour tablir une connexion BLUETOOTH et mettre du son. GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) 6 Appuyez plusieurs fois sur ADD sur le systme pour Les indicateurs ADD L/R des deux systmes signalent le mode de Chaque fois que vous appuyez sur ADD, le mode de sortie change
: Mode double (stro/stro)
: Mode stro (canal G/canal D)
: Mode stro (canal D/canal G) Pour changer le mode de sortie, utilisez le systme (systme matre), sur lequel vous avez activ le mode dajout Pour dsactiver la fonction dajout denceinte Maintenez ADD enfonc jusqu ce que les indicateurs ADD L/R soient teints. Astuce moins que vous dsactiviez la fonction, le systme essaiera de rtablir la dernire connexion effectue la prochaine mise sous tension du systme. A u t r e s o p r a t i o n s 23FR Lecture de musique avec deux systmes 1 Activez le mode de pairage sur le systme , puis effectuez la connexion BLUETOOTH avec un priphrique BLUETOOTH. Pour des informations dtailles sur le pairage, voir Pairage de ce systme avec un priphrique BLUETOOTH (page10) ou Connexion BLUETOOTH une touche par NFC (page12). Pensez associer par pairage le priphrique BLUETOOTH avec le systme (systme matre). 2 Dmarrez la lecture sur le priphrique BLUETOOTH, puis rglez le volume. Pour des informations dtailles, voir couter de la musique sur un priphrique BLUETOOTH
(page11). Le rglage du volume effectu sur lun des systmes est galement appliqu lautre systme. Remarques Si un ou plusieurs autres priphriques BLUETOOTH, par exemple une souris BLUETOOTH ou un clavier BLUETOOTH, sont connects au priphrique BLUETOOTH en cours de connexion avec le systme, une distorsion sonore ou du bruit peut tre mis par le systme. Dans ce cas, interrompez la connexion BLUETOOTH entre le priphrique BLUETOOTH et le ou les autres priphriques BLUETOOTH. Si vous rinitialisez lun des deux systmes alors que la fonction dajout denceinte est active, pensez mettre hors tension lautre systme. Si vous ne mettez pas hors tension lautre systme avant de redmarrer la fonction dajout denceinte, le systme risque de rencontrer des problmes pour tablir une connexion BLUETOOTH et mettre du son. GTK-XB60/XB90.4-697-227-11(1) 2 Appuyez plusieurs fois sur FUNCTION PAIRING jusqu ce que lindicateur AUDIO IN de lunit sallume fixement. 3 Dmarrez la lecture sur lquipement connect. 4 Rglez le volume. Rglez dabord le volume sur lquipement connect. Si le niveau du volume est encore trop bas, rglez-le sur le systme laide des touches de volume +/. Remarque Le systme peut entrer automatiquement en mode veille si le niveau de volume de lquipement connect est trop bas. Dans ce cas, augmentez le volume de lquipement. Pour dsactiver la fonction de mise en veille automatique, voir Rglage de la fonction de veille automatique (page24). Rglage de la fonction de veille automatique Par dfaut, ce systme steint automatiquement aprs environ 15minutes dinactivit, et si aucun signal audio nest mis. Pour dsactiver la fonction, maintenez enfonc plus de 3secondes alors que le systme est sous tension. Pour activer la fonction, rptez la procdure. Vous pouvez galement configurer ce rglage et vrifier que la fonction est active ou dsactive en utilisant SongPal . Pour des informations dtailles sur SongPal, voir Utilisation de SongPal via BLUETOOTH (page16). couter de la musique avec les voyants des enceintes allums 1 Appuyez sur LIGHT. Les voyants des enceintes sallument. Vous pouvez galement slectionner diffrents modes dclairage, par exemple le suivant, laide de SongPal (page16). RAVE : mode dclairage adapt la dance music avec beaucoup de clignotement CHILL : mode dclairage adapt la musique de relaxation RANDOM FLASH OFF: mode dclairage sans flash adapt toutes les musiques, y compris la dance music HOT: mode dclairage de couleur chaude COOL: mode dclairage de couleur froide STROBE : mode dclairage avec clignotement lectronique de couleur blanche Pour teindre les voyants des enceintes Appuyez nouveau sur LIGHT. Remarque Si la luminosit de lclairage vous blouit, allumez la lumire de la pice ou teignez lclairage. Utilisation dun quipement facultatif 1 Branchez tout quipement facultatif (WALKMAN, smartphone, TV, lecteur DVD, enregistreur IC, etc.) sur les prises AUDIO/PARTY CHAIN IN L/R de lunit lorsque vous utilisez un cordon audio (non fourni). 24FR GTK-XB60/XB90.4-697-227-11(1) Informations supplmentaires Guide de dpannage Si un problme se produit pendant lutilisation du systme, suivez les tapes dcrites ci-dessous avant de consulter le revendeur Sony le plus proche. Si un message derreur saffiche, veillez le noter des fins de rfrence. 1 Vrifiez lventuelle prsence du problme dans cette section Guide de dpannage. 2 Consultez les sites Web dassistance la clientle suivants. Pour les clients aux tats-Unis :
http://esupport.sony.com/
Pour les clients au Canada :
http://esupport.sony.com/CA Pour les clients en Europe :
http://www.sony.eu/support Pour les clients en Amrique latine :
http://esupport.sony.com/LA Pour les clients situs dans dautres pays/rgions :
http://www.sony-asia.com/
support Vous trouverez sur ces sites Web les informations dassistance les plus rcentes, ainsi quune section FAQ. Notez que si le personnel de rparation change certaines pices lors de lintervention, il peut garder ces pices. I n f o r m a t i o n s s u p p m e n t a i r e s l 25FR Informations sur les priphriques compatibles propos de la communication BLUETOOTH pour liPhone et liPod touch Conu pour iPhone 7 Plus iPhone 7 iPhone SE iPhone 6s Plus iPhone 6s iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPod touch (6e gnration) iPod touch (5e gnration) Sites Web des priphriques compatibles Consultez les sites Web ci-dessous pour connatre les dernires informations sur les priphriques BLUETOOTH compatibles. Pour les clients aux tats-Unis :
http://esupport.sony.com/
Pour les clients au Canada :
http://esupport.sony.com/CA Pour les clients en Europe :
http://www.sony.eu/support Pour les clients en Amrique latine :
http://esupport.sony.com/LA Pour les clients situs dans dautres pays/rgions :
http://www.sony-asia.com/support GTK-XB60/XB90.4-697-227-11(1) Un ronflement, un bruit puissant ou une distorsion sonore est mis. Sil y a des obstacles entre le systme et votre priphrique BLUETOOTH, retirez-les ou vitez-les. Si un quipement gnre un rayonnement lectromagntique, par exemple un rseau local sans fil, un autre priphrique BLUETOOTH ou un four micro-ondes proche, loignez-le. Baissez le volume du priphrique BLUETOOTH connect. Chane pour soire et fonction dajout denceinte Impossible dactiver la fonction Chane pour soire. Vrifiez les connexions (page18). Assurez-vous que les cordons audio sont bien connects. Slectionnez une autre fonction que la fonction Entr audio (page20). La fonction Chane pour soire fonctionne mal. teignez le systme. Puis rallumez-le pour activer la fonction Chane pour soire. Impossible de connecter un priphrique BLUETOOTH au systme avec la fonction dajout denceinte active. Aprs avoir connect deux systmes GTK-XB60/XB90, excutez la procdure de pairage entre un priphrique BLUETOOTH et le systme dont lindicateur
(BLUETOOTH) clignote. Ensuite, tablissez la connexion BLUETOOTH. Le priphrique BLUETOOTH narrive pas dtecter le systme. Activez le signal BLUETOOTH
(page16). La connexion est impossible. Le priphrique BLUETOOTH que vous avez essay de connecter ne prend pas en charge le profil A2DP, et il est impossible de le connecter au systme. Activez la fonction BLUETOOTH du priphrique BLUETOOTH. tablissez une connexion partir du priphrique BLUETOOTH. Les informations denregistrement de pairage ont t effaces. Recommencez le pairage. Effacez les informations denregistrement du pairage du priphrique BLUETOOTH en rinitialisant le systme aux paramtres dusine par dfaut
(page27) et recommencez le pairage (page10). Le son saute ou fluctue, ou la connexion est perdue. Le systme et le priphrique BLUETOOTH sont trop loigns lun de lautre. Sil y a des obstacles entre le systme et votre priphrique BLUETOOTH, retirez-les ou vitez-les. Si un quipement gnre un rayonnement lectromagntique, par exemple un rseau local sans fil, un autre priphrique BLUETOOTH ou un four micro-ondes proche, loignez-le. Le son de votre priphrique BLUETOOTH est inaudible sur ce systme. Augmentez le volume dabord sur votre priphrique BLUETOOTH, puis rglez le volume laide des touches de volume +/. Gnralits Le systme ne sallume pas. Vrifiez que le cordon dalimentation secteur est bien connect. Le systme est pass en mode veille. Il ne sagit pas dun dysfonctionnement. Le systme passe automatiquement en mode veille aprs un dlai denviron 15minutes dinactivit et si aucun signal audio nest dtect
(page24). Il ny a pas de son. Rglez le volume. Vrifiez la connexion de lventuel quipement facultatif. Mettez sous tension lquipement connect. Dbranchez le cordon dalimentation secteur, puis reconnectez-le et mettez le systme sous tension. Un ronflement ou un bruit important est mis. loignez le systme des sources sonores. Connectez le systme une autre prise murale. Installez un filtre sonore (disponible dans le commerce) sur le cordon dalimentation secteur. teignez les quipements lectriques situs proximit. Un effet Larsen est mis. Baissez le volume. Priphrique BLUETOOTH Impossible deffectuer le pairage. Rapprochez le priphrique BLUETOOTH du systme. Le pairage peut tre impossible si dautres priphriques BLUETOOTH sont prsents proximit du systme. Dans ce cas, mettez hors tension les autres priphriques BLUETOOTH. Pensez entrer la bonne cl de passe lorsque vous slectionnez le nom du systme (ce systme) sur le priphrique BLUETOOTH. 26FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Le priphrique BLUETOOTH narrive Le priphrique BLUETOOTH que vous avez essay de connecter ne prend pas en charge le profil A2DP, et il est impossible de le connecter Activez la fonction BLUETOOTH du tablissez une connexion partir du Les informations denregistrement BLUETOOTH sont trop loigns lun BLUETOOTH, retirez-les ou vitez-les. rayonnement lectromagntique, par exemple un rseau local sans fil, un autre priphrique BLUETOOTH ou un four micro-ondes proche, Augmentez le volume dabord sur votre priphrique BLUETOOTH, puis rglez le volume laide des touches Un ronflement, un bruit puissant ou une distorsion sonore est mis. Sil y a des obstacles entre le systme et votre priphrique BLUETOOTH, retirez-les ou vitez-les. Si un quipement gnre un rayonnement lectromagntique, par exemple un rseau local sans fil, un autre priphrique BLUETOOTH ou un four micro-ondes proche, loignez-le. Baissez le volume du priphrique BLUETOOTH connect. Chane pour soire et fonction dajout denceinte Impossible dactiver la fonction Chane pour soire. Vrifiez les connexions (page18). Assurez-vous que les cordons audio sont bien connects. Slectionnez une autre fonction que la fonction Entr audio (page20). La fonction Chane pour soire fonctionne mal. teignez le systme. Puis rallumez-le pour activer la fonction Chane pour soire. Impossible de connecter un priphrique BLUETOOTH au systme avec la fonction dajout denceinte active. Aprs avoir connect deux systmes GTK-XB60/XB90, excutez la procdure de pairage entre un priphrique BLUETOOTH et le systme dont lindicateur
(BLUETOOTH) clignote. Ensuite, tablissez la connexion BLUETOOTH. GTK-XB60/XB90.4-697-227-11(1) Rinitialisation du systme Si le systme ne fonctionne toujours pas correctement, rinitialisez-le aux rglages dusine par dfaut. 1 Dbranchez et rebranchez le cordon dalimentation secteur, puis allumez le systme. 2 Maintenez enfonc PAIRING et la FUNCTION touche de volume pendant au moins 5secondes. Aprs que les indicateurs ,
(BLUETOOTH) et AUDIO IN de lunit clignotent pendant plus de 3 secondes, tous les rglages configurs par lutilisateur, par exemple les informations denregistrement de pairage, sont rinitialiss aux valeurs dusine par dfaut. I n f o r m a t i o n s s u p p m e n t a i r e s l 27FR Ce systme prend en charge les fonctions de scurit conformes aux spcifications BLUETOOTH pour assurer des connexions scurises au cours des communications qui mettent en uvre la technologie BLUETOOTH. Toutefois, cette scurit peut tre insuffisante selon les paramtres slectionns et dautres facteurs. Vous devez donc rester prudent lorsque vous communiquez avec la technologie BLUETOOTH. Sony ne saurait tre tenu pour responsable de quelque manire que ce soit pour tout dommage ou toute perte qui rsulterait de fuites dinformations lies lutilisation de la technologie BLUETOOTH. La communication BLUETOOTH nest pas ncessairement garantie avec tous les priphriques BLUETOOTH qui ont le mme profil que ce systme. Les priphriques BLUETOOTH connects ce systme doivent respecter les spcifications BLUETOOTH fixes par Bluetooth SIG, Inc., et ils doivent tre certifis conformes. Toutefois, mme lorsquun priphrique est conforme aux spcifications BLUETOOTH, il peut y avoir des cas o les caractristiques ou les spcifications du priphrique BLUETOOTH lempchent de se connecter, ou peuvent entraner des diffrences dans les mthodes de contrle, laffichage ou le fonctionnement. Du bruit peut apparatre ou le son tre coup selon le priphrique BLUETOOTH connect au systme, lenvironnement de communications ou les conditions environnantes. Prcautions Scurit Dbranchez compltement le cordon dalimentation secteur de la prise murale sil ne doit pas tre utilis pendant une longue priode. Lorsque vous dbranchez le systme, tenez toujours le cordon dalimentation par la fiche. Ne tirez jamais directement sur le cordon. Si un objet solide ou un liquide sintroduit dans le systme, dbranchez-le et faites-
le vrifier par du personnel qualifi avant de le rutiliser. Le cordon dalimentation secteur ne doit tre remplac que dans un magasin de rparation qualifi. Lieu dinstallation Ne mettez pas le systme dans une position incline et ne le laissez pas dans des lieux extrmement chauds, froids, poussireux, sales, humides ou sans aration approprie. vitez de le soumettre des vibrations, et ne lexposez pas directement au soleil ou une lumire vive. Soyez prudent si vous devez placer le systme sur des surfaces qui ont subi un traitement particulier (par exemple de la cire, de lhuile ou du lustrant) pour viter lapparition de tache ou de dcoloration de la surface. Veillez ne pas clabousser lappareil avec de leau. Cet appareil nest pas tanche. Accumulation de chaleur La formation de chaleur sur le systme pendant le fonctionnement est normale et nest pas matire inquitude. Ne touchez pas le botier sil a t utilis sans interruption haut volume car il est peut-tre devenu chaud. Nobstruez pas les orifices daration. Enceintes Le systme denceintes intgr nest pas magntiquement blind et peut causer une distorsion de limage sur un tlviseur situ proximit. Dans ce cas, teignez le tlviseur et patientez 15 30 minutes avant de le rallumer. Si vous ne constatez pas damlioration, loignez davantage le systme du tlviseur. Nettoyage du botier Nettoyez ce systme avec un chiffon doux lgrement imbib dune solution dtergente douce. Nutilisez pas de tampons abrasifs, de poudre rcurer ou des solvants tels que diluants, benzine ou alcool. Communication BLUETOOTH Les priphriques BLUETOOTH doivent tre utiliss une distance maximale denviron 10 mtres (33 pieds) (sans obstacle) les uns des autres. Le rayon de communication efficace peut se rduire dans les conditions suivantes. Lorsquune personne, un objet mtallique, un mur ou toute autre obstruction se trouve entre les priphriques disposant dune connexion BLUETOOTH Emplacements o une connexion de rseau local sans fil est installe proximit de fours micro-ondes en cours dutilisation Dans des lieux o dautres types dondes lectromagntiques sont gnrs Les quipements BLUETOOTH et LAN sans fil (IEEE 802.11b/g) utilisent la mme bande de frquences (2,4 GHz). Lorsque vous utilisez votre priphrique BLUETOOTH prs dun priphrique dot de la fonctionnalit LAN sans fil, une interfrence lectromagntique peut apparatre. Cela peut entraner des vitesses de transfert des donnes infrieures, du bruit ou limpossibilit de se connecter. Si cela se produit, essayez les solutions suivantes:
Utilisez ce systme une distance dau moins 10 mtres (33pieds) de lquipement du rseau LAN sans fil. Mettez hors tension lquipement de rseau LAN sans fil lorsque vous utilisez votre priphrique BLUETOOTH dans un rayon de 10 mtres (33 pieds). Utilisez ce systme et le priphrique BLUETOOTH le plus prs possible lun de lautre. Les ondes radio mises par ce systme peuvent interfrer avec le fonctionnement de certains appareils mdicaux. Ces interfrences pouvant entraner un dysfonctionnement, teignez toujours ce systme et le priphrique BLUETOOTH dans les lieux suivants:
Dans les hpitaux, les trains, les avions, les stations-service et partout o des gaz inflammables peuvent tre prsents 28FR Prs de portes automatiques ou dalarmes incendie GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) doux lgrement imbib dune solution tampons abrasifs, de poudre rcurer ou des solvants tels que diluants, benzine ou Les priphriques BLUETOOTH doivent tre utiliss une distance maximale obstacle) les uns des autres. Le rayon de communication efficace peut se rduire mtallique, un mur ou toute autre Emplacements o une connexion de proximit de fours micro-ondes en dondes lectromagntiques sont Les quipements BLUETOOTH et LAN mme bande de frquences (2,4 GHz). Lorsque vous utilisez votre priphrique dot de la fonctionnalit LAN sans fil, une interfrence lectromagntique des vitesses de transfert des donnes infrieures, du bruit ou limpossibilit de se connecter. Si cela se produit, essayez Utilisez ce systme une distance dau moins 10 mtres (33pieds) de lquipement du rseau LAN sans fil. Mettez hors tension lquipement de rseau LAN sans fil lorsque vous utilisez votre priphrique BLUETOOTH dans un Utilisez ce systme et le priphrique BLUETOOTH le plus prs possible lun Les ondes radio mises par ce systme peuvent interfrer avec le fonctionnement dysfonctionnement, teignez toujours ce systme et le priphrique BLUETOOTH Dans les hpitaux, les trains, les avions, des gaz inflammables peuvent tre Spcifications CARACTRISTIQUES DE PUISSANCE AUDIO PUISSANCE DE SORTIE ET DISTORSION HARMONIQUE TOTALE:
(Modles destins aux tats-Unis seulement) Canal gauche/droit:
Avec des charges de 3ohms, deux canaux aliments, de 120 10000Hz; cote de puissance RMS minimum de 30 watts par canal, avec au plus 0,7% de distorsion harmonique totale de 250milliwatts la puissance nominale. Section enceinte Haut-parleur daigus:
50 mm (2 po) 2, type de cne Haut-parleur de graves :
130 mm (5 1/8po) 2, type de cne Entres AUDIO/PARTY CHAIN IN L/R:
Tension 2 V, impdance 10kilohms Sorties AUDIO/PARTY CHAIN OUT L/R:
Tension 2 V, impdance 600 ohms Section USB et formats audio pris en charge Port
(USB):
Type A, intensit maximum 2,1A Vitesse de transmission prise en charge:
MP3 (MPEG1 Audio Layer-3) :
32kbit/s 320kbit/s, VBR WMA : 32 kbit/s 192kbit/s, VBR Frquences dchantillonnage :
MP3 (MPEG1 Audio Layer-3) :
32/44,1/48 kHz WMA : 44,1 kHz I n f o r m a t i o n s s u p p m e n t a i r e s l 29FR Ce systme prend en charge les fonctions de scurit conformes aux spcifications BLUETOOTH pour assurer des connexions scurises au cours des communications qui mettent en uvre la technologie BLUETOOTH. Toutefois, cette scurit peut tre insuffisante selon les paramtres slectionns et dautres facteurs. Vous devez donc rester prudent lorsque vous communiquez avec la technologie BLUETOOTH. Sony ne saurait tre tenu pour responsable de quelque manire que ce soit pour tout dommage ou toute perte qui rsulterait de fuites dinformations lies lutilisation de la technologie BLUETOOTH. La communication BLUETOOTH nest pas ncessairement garantie avec tous les priphriques BLUETOOTH qui ont le mme profil que ce systme. Les priphriques BLUETOOTH connects ce systme doivent respecter les spcifications BLUETOOTH fixes par Bluetooth SIG, Inc., et ils doivent tre certifis conformes. Toutefois, mme lorsquun priphrique est conforme aux spcifications BLUETOOTH, il peut y avoir des cas o les caractristiques ou les spcifications du priphrique BLUETOOTH lempchent de se connecter, ou peuvent entraner des diffrences dans les mthodes de contrle, laffichage ou le fonctionnement. Du bruit peut apparatre ou le son tre coup selon le priphrique BLUETOOTH connect au systme, lenvironnement de communications ou les conditions environnantes. GTK-XB60/XB90.4-697-227-11(1) Section BLUETOOTH Systme de communication:
Version BLUETOOTH standard 3.0 Sortie:
Classe 2 de puissance BLUETOOTH standard Gnralits Alimentation :
Modle nord-amricain: 120V CA, 60 Hz Autres modles: 120V 240V CA, 50/60Hz Plage de communication maximum:
Consommation lectrique :
Ligne de vise env. 10 m (33 pieds)1) 30W Bande de frquence:
Bande 2,4 GHz (2,4000 GHz 2,4835GHz) Mthode de modulation:
FHSS (Freq Hopping Spread Spectrum) Consommation lectrique en veille:
Lorsque le mode veille BLUETOOTH est dsactiv: 0,5 W (mode co) Lorsque le mode veille BLUETOOTH est activ: 2,8W (tous les ports de rseau sans fil activs) Profils BLUETOOTH compatibles2):
Dimensions (L/H/P) (approx.):
262mm 524mm 273mm
(103/8po 20 3/4po 10 3/4po) Masse (approx.):
7kg (15lb 7oz) Quantit du systme:
1 lment Accessoires fournis :
Cordon dalimentation secteur (1) La conception et les spcifications peuvent tre modifies sans pravis. A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) SPP (Serial Port Profile) Codecs pris en charge:
SBC (Sub Band Codec) AAC (Advanced Audio Coding) LDAC 1) La plage effective varie selon des facteurs tels que les obstacles entre priphriques, les champs magntiques situs autour dun four micro-ondes, llectricit statique, la sensibilit de rception, les performances de lantenne, le systme dexploitation, les logiciels, etc. 2) Les profils standard BLUETOOTH indiquent lobjet de la communication BLUETOOTH entre priphriques. Avis concernant la licence et les marques commerciales Licence de la technologie de codage audio MPEG Layer-3 et des brevets obtenue de Fraunhofer IIS et Thomson. Windows Media est une marque commerciale ou dpose de Microsoft Corporation aux Etats-Unis et/ou dans dautres pays. Ce produit est protg par certains droits de proprit intellectuelle de Microsoft Corporation. Lutilisation ou la distribution de cette technologie en dehors de ce produit est interdite sans licence de Microsoft ou dune filiale de Microsoft autorise. La marque et les logos BLUETOOTH sont des marques dposes de Bluetooth SIG, Inc. Toute utilisation de ces marques par Sony Corporation est soumise une licence. Les autres marques et noms de commerce sont ceux de leurs propritaires respectifs. La Marque-N est une marque commerciale, dpose ou non, de NFC Forum, Inc., aux tats-Unis et dans dautres pays. Google Play et Android sont des marques de commerce de Google Inc. LDAC et le logo LDAC sont des marques commerciales de Sony Corporation. Apple, le logo Apple, iPhone et iPod touch sont des marques de commerce dApple Inc., enregistres aux tats-Unis et dans dautres pays. App Store est une marque de service dApple Inc. 30FR GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Modle nord-amricain: 120V CA, Autres modles: 120V 240V CA, Consommation lectrique en veille:
Lorsque le mode veille BLUETOOTH est dsactiv: 0,5 W (mode co) Lorsque le mode veille BLUETOOTH est activ: 2,8W (tous les ports de
(103/8po 20 3/4po 10 3/4po) Cordon dalimentation secteur (1) peuvent tre modifies sans pravis. Made for iPod et Made for iPhone signifient quun accessoire lectronique a t conu pour tre connect spcifiquement un iPod ou un iPhone, et quil a t certifi par le dveloppeur comme tant conforme aux normes de performances Apple. Apple nest pas responsable du bon fonctionnement de cet appareil ni de sa conformit aux normes et rglementations de scurit. Veuillez noter que lutilisation de cet accessoire avec un iPod ou un iPhone peut affecter les performances des transmissions sans fil. WALKMAN et le logo WALKMAN sont des marques dposes de Sony Corporation. Toutes les autres marques et marques dposes appartiennent leurs dtenteurs respectifs. Dans ce manuel, les sigles et ne sont pas spcifis. I n f o r m a t i o n s s u p p m e n t a i r e s l 31FR Avis concernant la licence et les marques commerciales Licence de la technologie de codage audio MPEG Layer-3 et des brevets obtenue de Fraunhofer IIS et Thomson. Windows Media est une marque commerciale ou dpose de Microsoft Corporation aux Etats-Unis et/ou dans dautres pays. Ce produit est protg par certains droits de proprit intellectuelle de Microsoft Corporation. Lutilisation ou la distribution de cette technologie en dehors de ce produit est interdite sans licence de Microsoft ou dune filiale de Microsoft autorise. La marque et les logos BLUETOOTH sont des marques dposes de Bluetooth SIG, Inc. Toute utilisation de ces marques par Sony Corporation est soumise une licence. Les autres marques et noms de commerce sont ceux de leurs propritaires respectifs. La Marque-N est une marque commerciale, dpose ou non, de NFC Forum, Inc., aux tats-Unis et dans dautres pays. Google Play et Android sont des marques de commerce de Google Inc. LDAC et le logo LDAC sont des marques commerciales de Sony Corporation. Apple, le logo Apple, iPhone et iPod touch sont des marques de commerce dApple Inc., enregistres aux tats-Unis et dans dautres pays. App Store est une marque de service dApple Inc. GTK-XB60/XB90.4-697-227-11(1)
1 2 | TempConfidential GTK-XB90- manal UC2 Fred Fabio IM UC2 4697227111 c2 2017-03-17 | Users Manual | 2.94 MiB |
Home Audio System Systme audio de salon Operating Instructions GB Mode demploi FR Manual de instrucciones ES 2017 Sony Corporation Printed in China/Imprim en Chine 4-697-227-11(1) GTK-XB60/XB90 GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. Indoor use only. Notice for the customers in the USA Owners Record The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-
over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2GB NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) 5) Do not use this apparatus near water. openings. Install in accordance with 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 9) Do not defeat the safety purpose of the polarized or grounding-type other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the 11) Only use attachments/accessories When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-
lightning storms or when unused for 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been GB CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). For customers in Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). 3GB This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. GTK-XB60/XB90.4-697-227-11(1) About this manual Some illustrations are presented as conceptual drawings, and may be different from the actual products. The instructions in this manual are for models GTK-XB60 and GTK-XB90. The GTK-XB60 is used for illustrative purposes unless otherwise noted. This system is designed to be used for the following purposes:
Playing back music sources on USB devices or BLUETOOTH devices Enjoying social gatherings with the Party Chain or speaker add function 4GB GTK-XB60/XB90.4-697-227-11(1) Table of Contents About this manual .....................4 Guide to parts and controls ......6 Getting Started Turning on the system ............ 10 Carrying the system ................ 10 Placing the system horizontally ............................... 11 About the power management ............................ 11 Charging the battery ................ 11 USB Device Before using the USB device ....13 Playing a file .............................13 BLUETOOTH connection Pairing this system with a BLUETOOTH device ...................15 One Touch BLUETOOTH Connection by NFC ...................17 Listening to music on a BLUETOOTH device .................. 18 About the BLUETOOTH wireless technology .................20 Playing back with high quality sound codec (AAC/LDAC) ....20 Setting the BLUETOOTH standby mode ..........................21 Turning on or off the BLUETOOTH signal ....................21 Using Sony | Music Center and Fiestable via BLUETOOTH connection .......... 22 Sound Adjustment Adjusting the sound ................ 23 GTK-XB60/XB90.4-697-227-11(1) Other Operations Enjoying wired playback using multiple systems (Wired Party Chain function) ........................ 24 Enjoying wireless playback using multiple systems
(Wireless Party Chain function) .................................. 27 Listening to music wirelessly with two systems (Speaker add function) ........................... 28 Enjoying music with the Speaker Lights .........................30 Enjoying hands-free calls ........30 Using an optional equipment ................................31 Using an optional microphone ............................. 32 Setting the automatic standby function ..................... 32 Saving the battery power ........ 32 Additional Information Information about compatible devices ................. 33 Troubleshooting ...................... 33 Precautions .............................. 37 Specifications ........................... 39 License and Trademark Notice ....................................... 41 5GB Guide to parts and controls GTK-XB90 GTK-XB60 Top Speaker Lights*
(page30) Speaker Lights*
(page30) Rear
* Do not look directly at the light-emitting parts when the Speaker Lights are turned on.
* Do not look directly at the light-emitting parts when the Speaker Lights are turned on. 6GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) GTK-XB90 Top Speaker Lights*
(page30) Rear
* Do not look directly at the light-emitting parts when the Speaker Lights are turned on. 7GB
* Do not look directly at the light-emitting parts when the Speaker Lights are turned on. GTK-XB60/XB90.4-697-227-11(1)
(N-Mark) (page17) ADD button (page28) ADD L/R indicators (page28) Audio output and input jacks Use an audio cord (not supplied) to make either connection as follows:
AUDIO/PARTY CHAIN OUT L/R W.PARTY CHAIN LIGHT button Press to turn the Wireless Party Chain function on (page27). Hold down for more than 3seconds to turn the speaker lights on/off (page30). LIGHT indicator W.PARTY CHAIN Lights up when the Wireless Party Chain function is in use
(page27). EXTRA BASS button AUDIO/PARTY CHAIN IN L/R Press to generate more dynamic sound (page23). Hold down for more than 3seconds while AC power cord is connected to play back the built-in sound demonstration. EXTRA BASS indicator Lights up when the EXTRA BASS function is turned on (page23). Volume +*/ buttons Press to adjust the volume.
(USB) port Use to connect a USB device. AC IN jack (page10) PARTY CHAIN button (page26) PARTY CHAIN indicator
(page26) MIC jack (page32) MIC LEVEL (MIN/MAX) knob
(page32) RESET button
* The /
button have a tactile dot. Use the tactile dot as a reference when operating the system. Indicator statuses The statuses of the indicators on the unit are shown in the illustrations as follows. Indicator status Flashing Lit up Turned off
(power) button Press to turn on or off the system.
(power) indicator Lights up in green while the system is turned on. Lights up in amber while the system is turned off, and when the BLUETOOTH standby mode is turned on. CHARGE indicator (page11) Lights up in amber while the battery is charging.
(play/pause)/
(call)* button Press to play/pause music. Press to receive/end a call when using the hands-
free call function with your BLUETOOTH-connected mobile phone (page30). Built-in microphone STAMINA BATTERY button Press to turn on the power-
saving mode (STAMINA mode) when using the built-in battery
(page32). Hold down to check the remaining battery level
(page12). BATTERY indicator STAMINA Lights up while STAMINA mode is active (page32). FUNCTION PAIRING button Press repeatedly to select the BLUETOOTH, USB or Audio In function. When the BLUETOOTH function is selected, hold down to activate BLUETOOTH pairing. Press to stop the built-in sound demonstration.
(BLUETOOTH) indicator
(page20) USB indicator (page13) AUDIO IN indicator (page31) 8GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) LIGHT button Press to turn the Wireless Party Chain function on (page27). 3seconds to turn the speaker Audio output and input jacks Use an audio cord (not supplied) to make either connection as follows:
AUDIO/PARTY CHAIN OUT L/R jacks Connect to the audio input jacks of an optional equipment. Connect to another audio system to enjoy the Wired Party Chain function
(page24). LIGHT indicator AUDIO/PARTY CHAIN IN L/R Press to generate more dynamic 3seconds while AC power cord is connected to play back the built-in sound demonstration. Lights up when the EXTRA BASS function is turned on (page23). PARTY CHAIN button (page26) jacks Connect to the audio output jacks of a TV or an audio/
video equipment. The sound is output through this system. Connect to another audio system to enjoy the Wired Party Chain function
(page24). RESET button
* The /
button and the volume +
button have a tactile dot. Use the tactile dot as a reference when operating the system. Indicator statuses The statuses of the indicators on the unit are shown in the illustrations as follows. Indicator status Illustration Flashing Lit up Turned off GTK-XB60/XB90.4-697-227-11(1) 9GB Getting Started Deactivating the demonstration Turning on the system 1 Connect the AC power cord
(supplied) to the AC IN jack on the rear of the unit, and then to the wall outlet. GTK-XB60 GTK-XB90 Hold down W.PARTY CHAIN LIGHT for more than 3seconds while the demonstration is performed. The demonstration ends and the system enters the standby mode. When you hold down W.PARTY CHAIN LIGHT during the standby mode, or when you disconnect and reconnect the AC power cord, the system enters the demonstration mode. Carrying the system Before carrying the system, disconnect all the cords. AC power cord (supplied) To wall outlet The system is turned on in the demonstration mode and the demonstration starts automatically. 2 Press to turn on the system. The indicator lights up in green. Hint The system can be used with the built-in battery instead of connecting the AC power cord (supplied) to a wall outlet if you have charged the battery before use. For details, see Charging the battery (page11). Note Correct hand placement while carrying the system is very important to avoid personal injury and/or property damage. Placing the system horizontally You can also place the system horizontally as illustrated below. (Place the rubber feet side down.) Hint When you change the orientation of the system, the tweeters that output sound for the left and right channels are switched to the upper two units automatically (for GTK-XB90 only). About the power management By default, this system is set to turn off automatically in about 15minutes when there is no operation, and no audio signal is detected. For details, see Setting the automatic standby function (page32). You can reduce the power consumption using STAMINA mode. For details, see Saving the battery power (page32). 10GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Deactivating the demonstration LIGHT for more than 3seconds When you hold down W.PARTY CHAIN LIGHT during the standby mode, or when you disconnect and reconnect the AC power cord, the system enters Before carrying the system, disconnect Correct hand placement while carrying the system is very important to avoid personal Placing the system horizontally You can also place the system horizontally as illustrated below. (Place the rubber feet side down.) Hint When you change the orientation of the system, the tweeters that output sound for the left and right channels are switched to the upper two units automatically (for GTK-XB90 only). About the power management By default, this system is set to turn off automatically in about 15minutes when there is no operation, and no audio signal is detected. For details, see Setting the automatic standby function (page32). You can reduce the power consumption using STAMINA mode. For details, see Saving the battery power (page32). Charging the battery The system can be used with the built-in battery (rechargeable) instead of connecting the AC power cord to a wall outlet if the battery has been sufficiently charged. Connect the AC power cord
(supplied) to the AC IN jack on the rear of the unit, and then to the wall outlet. GTK-XB60 GTK-XB90 AC power cord (supplied) To wall outlet The CHARGE indicator will light up in amber. Charging will be completed in about 3.5 hours and the indicator will turn off. G e t t i n g S t a r t e d 11GB GTK-XB60/XB90.4-697-227-11(1) Notes It may take longer to charge the battery depending on the conditions of use. Even if you do not intend to use the system for a long time, charge the battery to its full capacity once every six months to maintain its performance. Hint You can operate the system while it is charging. Checking the battery level of the rechargeable battery You can check the remaining battery level via voice guidance when using the system with the built-in battery. You can also check the battery level using Sony | Music Center
(page22). 1 Press to turn on the system. Make sure that the AC power cord is not connected to a wall outlet. You can only check the battery level when using the built-in battery. 2 Hold down STAMINA BATTERY. 3 The voice guidance message Indicator flashes 4 times is heard and the CHARGE indicator flashes as follows according to the remaining battery level. Message
(battery level) Fully charged
(80% 100%) About 70%
(60% 79%) About 50%
(30% 59%) About 20%
(11% 29%) Please charge
(less than 10%) 3 times 2 times Once Continuously Hint Please charge is output automatically when the remaining battery level is less than 10%. USB Device Before using the USB device For compatible USB devices, see Information about compatible devices (page33). When using Apple devices with this system, connect them via a BLUETOOTH connection (page15). Using Apple devices via a USB connection is not supported. Notes When USB cable connection is necessary, use the USB cable supplied with the USB device. See the operating instructions supplied with the USB device for details on the operation method. Do not connect the system and the USB device through a USB hub. When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. With some connected USB devices, there may be a delay before an operation is performed by this system. Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted audio, or may not play at all. This system does not necessarily support all the functions provided in a connected USB device. 12GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) 3 The voice guidance message indicator flashes as follows according to the remaining Continuously Please charge is output automatically when the remaining battery level is less USB Device Before using the USB device For compatible USB devices, see Information about compatible devices (page33). When using Apple devices with this system, connect them via a BLUETOOTH connection (page15). Using Apple devices via a USB connection is not supported. Notes When USB cable connection is necessary, use the USB cable supplied with the USB device. See the operating instructions supplied with the USB device for details on the operation method. Do not connect the system and the USB device through a USB hub. When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. With some connected USB devices, there may be a delay before an operation is performed by this system. Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted audio, or may not play at all. This system does not necessarily support all the functions provided in a connected USB device. GTK-XB60/XB90.4-697-227-11(1) To use the system as a battery charger You can use the system as a battery charger for USB devices that have a rechargeable function.
(USB) Connect the USB device to the port. The charging begins when the USB device is connected to the
(USB) port. For details, refer to the operating instructions of your USB device. Playing a file The following audio file formats are supported:
MP3: file extension .mp3 WMA: file extension .wma 1 Press FUNCTION PAIRING repeatedly until the USB indicator on the unit lights up. 2 Connect the USB device to the
(USB) port. 3 Press /
to start playback. You can control playback operations and select music easily from a list of music on the USB device using Sony | Music Center
(page22). 4 Press the volume +/ buttons to adjust the volume. U S B D e v i c e 13GB Other operations To Pause playback Play back the next song Play back the previous song
. To Do this Press /
resume play, press
/
Press /
again. twice. Press /
three times. for Notes This system cannot play audio files on the USB device in the following cases;
when the total number of audio files on a USB device exceeds 999. when the number of folders on a USB device exceeds 256 (including the ROOT folder and empty folders). These numbers may vary depending on the file and folder structure. Do not save other types of files or unnecessary folders on a USB device that has audio files. The system can play back to a depth of 8 folders only. Folders that have no audio files are skipped. Note that even when the file name has the correct file extension, if the actual file differs, the system may emit noise or malfunction. 14GB GTK-XB60/XB90.4-697-227-11(1) BLUETOOTH connection Pairing this system with a BLUETOOTH device Pairing is an operation in which BLUETOOTH devices register each other beforehand. Once the pairing operation has been performed, it does not need to be performed again for those devices. If your device is an NFC-compatible smartphone, the manual pairing procedure is not necessary. (See One Touch BLUETOOTH Connection by NFC
(page17).) 1 Place the BLUETOOTH device within 1meter (3 feet) from the system. 2 Select the BLUETOOTH function. Press to turn on the system. Press FUNCTION PAIRING repeatedly until the
(BLUETOOTH) indicator on the unit flashes slowly. 3 Hold down FUNCTION PAIRING for more than 3seconds. Voice guidance (Bluetooth pairing) will be output and the
(BLUETOOTH) indicator will flash quickly. Bluetooth pairing 4 Turn on the BLUETOOTH function on the BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. 5 Select GTK-XB60 or GTK-XB90 on the display of the BLUETOOTH device. Hint When there is no pairing information on the system (for example, when you use the BLUETOOTH function for the first time after purchase), the
(BLUETOOTH) indicator flashes quickly and the system enters the pairing mode automatically. In this case, proceed to step 4. Note If passkey is required on the BLUETOOTH device, enter 0000. Passkey may be called Passcode, PIN code, PIN number, or Password. GTK-XB60/XB90.4-697-227-11(1) B L U E T O O T H c o n n e c t i o n 15GB 6 Make sure that a BLUETOOTH connection has been established. Once a BLUETOOTH connection is established, the system will emit a notification sound, and the
(BLUETOOTH) indicator on the unit will stop flashing and remain lit up. Depending on the BLUETOOTH device, connection may start automatically after pairing is completed. Notes You can pair up to 8 BLUETOOTH devices. If the 9th BLUETOOTH device is paired, the oldest paired device will be deleted. If you want to pair with another BLUETOOTH device, repeat steps 1 to 6. If the last connected BLUETOOTH device is nearby, a BLUETOOTH connection will be established automatically and the BLUETOOTH indicator will light up. If you want to connect another BLUETOOTH device, turn off the BLUETOOTH function on the connected device or turn off the power on the connected device. To cancel the pairing operation Press FUNCTION PAIRING. To terminate the BLUETOOTH connection Turn off the BLUETOOTH function on the connected device. Note Depending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback. Erasing all the pairing registration information To erase all of the pairing registration information, the system needs to be restored to the factory default settings. See Restoring the system to the factory default settings
(page37). Note Once all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again. One Touch BLUETOOTH Connection by NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. When you touch the system with an NFC-compatible smartphone, the system automatically:
turns on in the BLUETOOTH function. completes the pairing and BLUETOOTH connection. Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 or later, excluding Android 3.x) Notes The system can only recognize and connect to one NFC-compatible smartphone at a time. If you try to connect another NFC-compatible smartphone to the system, the currently connected NFC-compatible smartphone will be disconnected. Depending on your NFC-compatible smartphone, you may need to perform the following steps on your NFC-compatible smartphone in advance. Turn on the NFC function. For details, refer to the operating instructions of the NFC-compatible smartphone. If your NFC-compatible smartphone has an OS version that is older than Android 4.1.x, download and start the NFC Easy Connect application. NFC Easy Connect is a free application for Android smartphones that can be obtained from Google Play. (The application may not be available in some countries/regions.) 1 Turn on the NFC function of a BLUETOOTH device, such as a smartphone or tablet. 16GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Turn off the BLUETOOTH function on Depending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback. To erase all of the pairing registration information, the system needs to be restored to the factory default settings. See Restoring the system Once all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again. One Touch BLUETOOTH Connection by NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. When you touch the system with an NFC-compatible smartphone, the system automatically:
turns on in the BLUETOOTH function. completes the pairing and BLUETOOTH connection. Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 or later, excluding Android 3.x) Notes The system can only recognize and connect to one NFC-compatible smartphone at a time. If you try to connect another NFC-compatible smartphone to the system, the currently connected NFC-compatible smartphone will be disconnected. Depending on your NFC-compatible smartphone, you may need to perform the following steps on your NFC-compatible smartphone in advance. Turn on the NFC function. For details, refer to the operating instructions of the NFC-compatible smartphone. If your NFC-compatible smartphone has an OS version that is older than Android 4.1.x, download and start the NFC Easy Connect application. NFC Easy Connect is a free application for Android smartphones that can be obtained from Google Play. (The application may not be available in some countries/regions.) 1 Turn on the NFC function of a BLUETOOTH device, such as a smartphone or tablet. 2 Touch the BLUETOOTH device to the N-Mark on the unit until the BLUETOOTH device responds to the system. Complete the connection by following the instructions displayed on the BLUETOOTH device. When the BLUETOOTH connection is established, the
(BLUETOOTH) indicator on the unit stops flashing and remains lit. Hint If pairing and the BLUETOOTH connection fail, perform the following. Remove the case from the smartphone if using a commercially available smartphone case. Touch the smartphone to the N-Mark on the unit again. Relaunch the NFC Easy Connect application. Unlock the screen of the BLUETOOTH device. B L U E T O O T H c o n n e c t i o n 17GB GTK-XB60/XB90.4-697-227-11(1) To terminate the BLUETOOTH connection Touch the BLUETOOTH device to the N-Mark on the unit again. Erasing all the pairing registration information To erase all of the pairing registration information, the system needs to be restored to the factory default settings. See Restoring the system to the factory default settings
(page37). Note Once all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again. Listening to music on a BLUETOOTH device You can enjoy listening to music on a connected BLUETOOTH device via the system using AVRCP. Check the following before playing music:
The BLUETOOTH function of the BLUETOOTH device is turned on. 2 Start playback of an audio source on the BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. You can also use /
system to play back/pause the music. Pairing has been completed
(page15). 1 Press FUNCTION repeatedly until the PAIRING
(BLUETOOTH) indicator on the unit lights up. The last connected BLUETOOTH device will be connected automatically.
(BLUETOOTH) indicator flashes, Note If the the BLUETOOTH connection hasnt been established. In this case, complete the pairing procedure and establish a BLUETOOTH connection. 3 Adjust the volume. Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level on the system using the volume +/ buttons. BLUETOOTH device 18GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Listening to music on a You can enjoy listening to music on a connected BLUETOOTH device via the Check the following before playing The BLUETOOTH function of the BLUETOOTH device is turned on. PAIRING
(BLUETOOTH) indicator on The last connected BLUETOOTH
(BLUETOOTH) indicator flashes, been established. In this case, complete Switching between BLUETOOTH devices connected to the system at the same time (Multipoint connection) Up to 3 BLUETOOTH devices can be connected to the system at the same time. While playing back an audio source from one of the connected devices, you can switch the BLUETOOTH input device by operating another connected device to start playback. Notes You cannot use this function when using the hands-free call function, speaker add function, or Wireless Party Chain function. Depending on the BLUETOOTH devices, you may not be able to make 3 BLUETOOTH connections at the same time. 2 Start playback of an audio source on the BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. You can also use /
on the system to play back/pause the music. 3 Adjust the volume. Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level on the system using the volume +/ buttons. BLUETOOTH device B L U E T O O T H c o n n e c t i o n 19GB GTK-XB60/XB90.4-697-227-11(1) About the BLUETOOTH wireless technology BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices. BLUETOOTH wireless technology operates within a range of about 10 meters (33 feet). Supported BLUETOOTH version, profiles and codecs For details, see BLUETOOTH section
(page39).
(BLUETOOTH) indicator
(BLUETOOTH) indicator on the Indicator status Flashing slowly The unit lights up or flashes in blue to show the BLUETOOTH status. System status BLUETOOTH standby BLUETOOTH pairing BLUETOOTH connection is established Flashing quickly Lit up LDAC is an audio coding technology developed by Sony, that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies, such as SBC, it operates without any down-conversion of the Hi-Res Audio content1). It also allows approximately three times more data2) than the other technologies, for transmitting over a BLUETOOTH wireless network with unprecedented sound quality using efficient coding and optimized data bundling. 1) Excluding DSD format contents. 2) In comparison with SBC (Sub Band Codec), when the bit rate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected. Playing back with high quality sound codec
(AAC/LDAC) This system can receive data in the AAC or LDAC codec format from a BLUETOOTH device. It provides a playback with higher sound quality. You can select an audio codec option from the following two settings by using Sony | Music Center
(page22). The default setting of this system is AUTO. AUTO: The system detects the codec used on the source device and automatically selects the optimal codec from SBC, AAC* or LDAC*. SBC: SBC is always applied regardless of the codec used on the source device.
* Available only when the codec is supported by your BLUETOOTH device. To apply the changes of the setting, you need to terminate the BLUETOOTH connection (page16), and then perform the BLUETOOTH connection again. Note You can enjoy higher sound quality when the source device is compatible with AAC/LDAC and this function is set to AUTO. However, the sound may be interrupted depending on the conditions of the BLUETOOTH communication. If this happens, set the function to SBC. 20GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) LDAC is an audio coding technology developed by Sony, that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies, such as SBC, it operates without any down-conversion of the Hi-Res Audio content1). It also allows approximately three times more data2) than the other technologies, for transmitting over a BLUETOOTH wireless network with unprecedented sound quality using efficient coding and optimized data bundling. 1) Excluding DSD format contents. 2) In comparison with SBC (Sub Band Codec), when the bit rate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected. Playing back with high This system can receive data in the AAC or LDAC codec format from a playback with higher sound quality. You can select an audio codec option AUTO: The system detects the codec automatically selects the optimal codec from SBC, AAC* or LDAC*. regardless of the codec used on the supported by your BLUETOOTH device. To apply the changes of the setting, you need to terminate the BLUETOOTH perform the BLUETOOTH connection with AAC/LDAC and this function is set to AUTO. However, the sound may be interrupted depending on the conditions of the BLUETOOTH communication. If this Setting the BLUETOOTH standby mode The BLUETOOTH standby mode enables the system to turn on automatically when you establish the BLUETOOTH connection with a BLUETOOTH device. This setting is turned off by default. This setting can only be configured by using Sony | Music Center. For details on Sony | Music Center, see Using Sony | Music Center and Fiestable via BLUETOOTH connection
(page22). Note The BLUETOOTH function can only be set to on while the AC power cord is connected. Hint Disable the BLUETOOTH standby mode to reduce the power consumption in standby mode (eco mode). Turning on or off the BLUETOOTH signal You can connect to the system from a paired BLUETOOTH device in all functions when the systems BLUETOOTH signal is set to on. This setting is turned on by default. BATTERY Hold down STAMINA and W.PARTY CHAIN LIGHT for more than 5 seconds to turn off the BLUETOOTH signal. AUDIO IN indicator will flash once. Notes You cannot perform the following operations when you turn off the BLUETOOTH signal:
Pairing and/or connecting with BLUETOOTH device Using Sony | Music Center via BLUETOOTH connection To turn on the BLUETOOTH signal, repeat the procedure shown above. When the BLUETOOTH signal turns on, the AUDIO IN indicator flashes 3 times. B L U E T O O T H c o n n e c t i o n 21GB GTK-XB60/XB90.4-697-227-11(1) Sound Adjustment Adjusting the sound To Adjust the volume Generate a more dynamic sound Using Sony | Music Center and Fiestable via BLUETOOTH connection About App You can control the system more flexibly and enjoy it in new ways using the free Apps Sony | Music Center and Fiestable on your smartphone/
iPhone. Sony | Music Center and Fiestable are available in both Google Play and the App Store. 1 Search for Sony | Music Center and download the App to your smartphone/iPhone. You can also download the App by scanning the two-dimensional code below. dummy 2 Establish a BLUETOOTH connection between the system and your smartphone/iPhone. For details on BLUETOOTH connection, see Pairing this system with a BLUETOOTH device
(page15) or One Touch BLUETOOTH Connection by NFC
(page17). 3 Launch Sony | Music Center and download Fiestable. You can also download Fiestable from the App Store or Google Play. What you can do with Sony | Music Center:
Play back music on a USB device and set play modes Balance the sound using preset EQs or custom EQs Change the sound effect using DJ EFFECT Control multiple systems when using the Wireless Party Chain or speaker add function Check the battery level Configure the various settings for the system What you can do with Fiestable:
DJ Control Illumination Motion Control Refer to Sony | Music Center Help for more details. http://xxxxxxxxxxxxxxxxxxxxxx dummy Notes If the Sony | Music Center application does not work properly, terminate the BLUETOOTH connection (page16), then perform the BLUETOOTH connection again so that the BLUETOOTH connection functions normally. What you can control with Sony | Music Center varies depending on the connected device. The specification and design of the application may change without notice. 22GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Sound Adjustment Adjusting the sound To Adjust the volume Generate a more dynamic sound Do this Press the volume +/
buttons. Press EXTRA BASS. The EXTRA BASS indicator lights up in red while the EXTRA BASS function is turned on. 3 Launch Sony | Music Center and download Fiestable. You can also download Fiestable from the App Store or Google Play. Play back music on a USB device and Balance the sound using preset EQs or Control multiple systems when using the Wireless Party Chain or speaker Configure the various settings for the What you can do with Fiestable:
Refer to Sony | Music Center Help If the Sony | Music Center application does not work properly, terminate the then perform the BLUETOOTH connection again so that the BLUETOOTH connection Sony | Music Center varies depending on application may change without notice. S o u n d A d u s t m e n t j 23GB GTK-XB60/XB90.4-697-227-11(1) If one of the systems is not equipped with the Wired Party Chain function Connect the system that is not equipped with the Wired Party Chain function as the last system. Be sure to select the Audio In function on the last system. In this configuration, the sound from the last system may lag behind others. Example: When connecting using this system as the first system Last system The last system is not connected to the first system. You must select the first system as Party Host so that all systems are playing the same music when Wired Party Chain function is activated. Other Operations Enjoying wired playback using multiple systems
(Wired Party Chain function) You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output. An activated system in the chain will be the Party Host and share the music. Other systems will become Party Guests and play the same music as that being played by the Party Host. Setting up the Wired Party Chain Set up a Wired Party Chain by connecting all the systems using audio cords (not supplied). Before connecting the cords, be sure to turn off the system and disconnect the AC power cord. If all the systems are equipped with the Wired Party Chain function Example: When connecting using this system as the first system Continue the connection until the last system. Last system First system Second system Any system can become a Party Host. You can change the Party Host to another system in the chain. For details, see To select a new Party Host (page26). Make sure that the
(BLUETOOTH) function or USB function is selected. When the Audio In function is selected, this feature cannot be used. Note You do not need to connect the last system to the first system. In this case, only the first system can become a Party Host. 24GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) If one of the systems is not equipped with the Wired Party Chain function Connect the system that is not equipped with the Wired Party Chain function as the last system. Be sure to select the Audio In function on the last system. In this configuration, the sound from the last system may lag behind others. Example: When connecting using this system as the first system You can connect multiple audio systems in a chain to create a more interesting An activated system in the chain will be the Party Host and share the music. Other systems will become Party Guests and play the same music as that being Set up a Wired Party Chain by connecting all the systems using audio cords (not Last system Before connecting the cords, be sure to turn off the system and disconnect the AC Continue the connection until the last system. Second system First system The last system is not connected to the first system. You must select the first system as Party Host so that all systems are playing the same music when Wired Party Chain function is activated. Any system can become a Party Host. You can change the Party Host to another
(BLUETOOTH) function or USB function is selected. When You do not need to connect the last system to the first system. In this case, only the first GTK-XB60/XB90.4-697-227-11(1) O t h e r O p e r a t i o n s 25GB To select a new Party Host Only when you connect using
(page24), you can select a new Party Host. Repeat step 3 of Enjoying the Wired Party Chain on the system to be used as a new Party Host. The current Party Host becomes Party Guest automatically. All systems play the same music as that being played by the new Party Host. Notes You can select another system as the new Party Host only after the Wired Party Chain function of all the systems in the chain has been activated. If the selected system does not become a new Party Host after a few seconds, repeat step 3 of Enjoying the Wired Party Chain. To deactivate the Wired Party Chain Press PARTY CHAIN on the Party Host. Note If the Wired Party Chain function is not deactivated after a few seconds, press PARTY CHAIN on the Party Host again. Party Chain indicator The PARTY CHAIN indicator on the unit lights up or flashes to show the system status. System status Party Host Party Guest Indicator status Lit up Flashing Enjoying wireless playback using multiple systems (Wireless Party Chain function) You can connect multiple audio systems in a chain via BLUETOOTH connection if all the systems are equipped with the Wireless Party Chain function. This function allows you to create a more exciting party environment and to produce higher sound output without a cable connection. The first system in the chain to be activated becomes the Party Host and shares the music. Other systems become Party Guests and play the same music as that being played by the Party Host. Setting up and enjoying the Wireless Party Chain Example: setting the GTK-XB60 or GTK-XB90 as the first system (Party Host) 1 Set the first system as the Party Host. Press FUNCTION Connect the BLUETOOTH device Press W.PARTY CHAIN Enjoying the Wired Party Chain 1 Turn on all the systems. 2 Adjust the volume on each system. 3 Activate the Wired Party Chain function on the system to be used as the Party Host. Example: When using this system as the Party Host Press FUNCTION PAIRING repeatedly to select the function you want. When you connect using
(page24), do not select the Audio In function. If you select this function, sound cannot be output. Start playback and then press PARTY CHAIN on the rear of the unit. The PARTY CHAIN indicator lights up. The Party Host starts the Wired Party Chain, and other systems become Party Guests automatically. All systems play the same music as that being played by the Party Host. Notes Depending on the total unit of systems you have connected, Party Guests may take some time to start playing the music. Changing the volume level and sound effect on the Party Host will not affect the output on the Party Guests. For detailed operation on other systems, refer to the operating instructions of the systems. 26GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Party Host. Repeat step 3 of Enjoying the Wired Party Chain on the system to be used as a new Party Host. The current Party Host becomes Party Guest automatically. All systems play the same music as that being played You can select another system as the new Party Host only after the Wired Party Chain function of all the systems in the chain If the selected system does not become a new Party Host after a few seconds, repeat step 3 of Enjoying the Wired Party Chain. To deactivate the Wired Party Chain Press PARTY CHAIN on the Party Host. If the Wired Party Chain function is not deactivated after a few seconds, press The PARTY CHAIN indicator on the unit lights up or flashes to show the Indicator status Enjoying wireless playback using multiple systems (Wireless Party Chain function) You can connect multiple audio systems in a chain via BLUETOOTH connection if all the systems are equipped with the Wireless Party Chain function. This function allows you to create a more exciting party environment and to produce higher sound output without a cable connection. The first system in the chain to be activated becomes the Party Host and shares the music. Other systems become Party Guests and play the same music as that being played by the Party Host. Setting up and enjoying the Wireless Party Chain Example: setting the GTK-XB60 or GTK-XB90 as the first system (Party Host) 1 Set the first system as the Party Host. Press FUNCTION repeatedly until the PAIRING
(BLUETOOTH) indicator lights up. Connect the BLUETOOTH device to the system via BLUETOOTH connection. Press W.PARTY CHAIN LIGHT on the unit. The W.PARTY CHAIN indicator will start flashing and the system will enter the Wireless Party Chain mode. LIGHT 2 Set the second system as a Party Guest. Press FUNCTION PAIRING on the second system repeatedly until the indicator lights up.
(BLUETOOTH) Press W.PARTY CHAIN on the second system. The second system will be set as a Party Guest. LIGHT Make sure that the LIGHT W.PARTY CHAIN indicators on both the Party Host and Party Guest stop flashing and remain lit up. Note The Wireless Party Chain function is canceled in the following situations. There is no operation within 1minute after the Party Host is set in step 1. W.PARTY CHAIN LIGHT is pressed on the Party Host before step 2 is completed. O t h e r O p e r a t i o n s 3 Set the third or more systems as Party Guests. Repeat step 2. 4 Start playing back an audio source on the Party Host. To deactivate the Wireless Party Chain Press W.PARTY CHAIN Party Host. LIGHT on the Hint To deactivate only one of the Party Guests and keep the rest of the Wireless Party Chain, press W.PARTY CHAIN Party Guest you want to deactivate. LIGHT on the Wireless Party Chain indicator LIGHT indicator The W.PARTY CHAIN on the unit lights up or flashes to show the system status. System status Party Host Party Guest Indicator status Lit up Flashing 27GB GTK-XB60/XB90.4-697-227-11(1) 6 Hold down ADD on system repeatedly to select the output mode. The ADD L/R indicators on both systems show the current output mode. Each time you hold down ADD, the output mode changes as follows. Hint To change the output mode, operate system (master system), on which you have activated the speaker add mode. 4 Press FUNCTION PAIRING on system repeatedly until the
(BLUETOOTH) indicator on the unit lights up. 5 Press ADD on system . The ADD L/R indicators on the unit will flash. Then the L/R indicators on both systems change their status from flashing to lit while the
(BLUETOOTH) indicator on system is turned off. Listening to music wirelessly with two systems (Speaker add function) To use this function, two GTK-XB60/XB90 systems are required. By connecting two GTK-XB60/XB90 systems via BLUETOOTH wireless technology, you can enjoy music in a more powerful way. You can also select an audio output between double mode (in which the two systems play the same sound) and stereo mode (stereo sound). In the following steps, the two systems are described as system
(or master system) and system . Activating the speaker add function 1 Bring two GTK-XB60/XB90 systems within 1 meter (3 feet) of each other. 2 Press FUNCTION PAIRING on system repeatedly until the
(BLUETOOTH) indicator on the unit lights up. 3 Press ADD on system . The ADD L/R indicators will flash and the system will enter the speaker add mode. Hint When the connection by the speaker add function is established very quickly, the L/R indicators on system may light up directly without flashing. 28GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) PAIRING on system repeatedly until
(BLUETOOTH) indicator 5 Press ADD on system . The ADD L/R indicators on the Then the L/R indicators on both 6 Hold down ADD on system repeatedly to select the output mode. The ADD L/R indicators on both systems show the current output mode. Each time you hold down ADD, the output mode changes as follows.
: Double mode
(stereo/stereo)
: Stereo mode (L ch/R ch)
: Stereo mode (R ch/L ch) Hint To change the output mode, operate system (master system), on which you have activated the speaker add mode. GTK-XB60/XB90.4-697-227-11(1) When the connection by the speaker add function is established very quickly, the L/R indicators on system may Playing music with two systems 1 Activate the pairing mode on system , and then perform the BLUETOOTH connection with a BLUETOOTH device. For details on the pairing, see Pairing this system with a BLUETOOTH device (page15) or One Touch BLUETOOTH Connection by NFC (page17). Make sure to pair the BLUETOOTH device with system (master system). 2 Start playback on the BLUETOOTH device, and adjust the volume. For details, see Listening to music on a BLUETOOTH device
(page18). Volume adjustments made on either one of the systems are also reflected on the other system. Notes If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connecting with the system, there may be distorted sound or noise in the system output. In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s). If you reset one of the two systems while using the speaker add function, make sure to turn off the other system. If you do not turn off the other system before restarting the speaker add function, there may be problems in making a BLUETOOTH connection and outputting sound. To deactivate the speaker add function Press ADD until the ADD L/R indicators are turned off. Hint Unless you deactivate the function, the system will try to establish the last made connection next time you turn on the system. O t h e r O p e r a t i o n s 29GB Enjoying music with the Speaker Lights The Speaker Lights are turned on by default. You can also select various light modes such as the following by using Sony | Music Center (page22). RAVE: a light mode suitable for dance music with a lot of flashing CHILL: a light mode suitable for relaxing music RANDOM FLASH OFF: a light mode without flash suitable for all music, including dance music HOT: a light mode of warm color COOL: a light mode of cool color STROBE: a light mode with an electronic flash of white color To turn off the Speaker Lights Hold down W.PARTY CHAIN LIGHT. To turn on the Speaker Lights, hold down W.PARTY CHAIN LIGHT again. Note If the illumination brightness is glaring, switch on the room lights or turn off the illumination. Enjoying hands-free calls You can enjoy hands-free calls with a BLUETOOTH mobile phone that supports HFP (Hands-free Profile) or HSP (Headset Profile). Only normal calls are supported. Calls via LINE, Skype, and other apps are not supported. To use this function, make sure that a BLUETOOTH connection has been established. Receiving a call 1 Press / when a call is incoming. When an incoming call arrives, playback pauses and the system emits a ring tone. GTK-XB60 GTK-XB90 Built-in microphone Making a call 1 Make a call by operating the connected BLUETOOTH mobile phone. When you make a call, playback will pause and the system will emit a dial tone. 2 Talk into the systems built-in microphone when the other party answers the call. 3 Press / to end the call. Note If you hold down /
phone call output will be switched from the system to the speaker on your mobile phone. Hints If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP. If you were listening to music before the call, playback will resume when the call ends. Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions for your mobile phone. Note If you hold down /
incoming, the call will be rejected. when a call is 2 Talk into the systems built-in microphone. 3 Press / to end the call. 30GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Making a call 1 Make a call by operating the connected BLUETOOTH mobile phone. When you make a call, playback will pause and the system will emit a dial tone. 2 Talk into the systems built-in microphone when the other party answers the call. 3 Press / to end the call. Note If you hold down /
phone call output will be switched from the system to the speaker on your mobile phone. while talking, the Hints If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP. If you were listening to music before the call, playback will resume when the call ends. Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions for your mobile phone. Enjoying hands-free calls You can enjoy hands-free calls with supports HFP (Hands-free Profile) or Only normal calls are supported. Calls via LINE, Skype, and other apps are not To use this function, make sure that a BLUETOOTH connection has been 1 Press / when a call is When an incoming call arrives, playback pauses and the system Built-in microphone when a call is 2 Talk into the systems built-in 3 Press / to end the call. Using an optional equipment 1 Connect an optional equipment (i.e. WALKMAN, smartphone, TV, DVD player, IC recorder, etc.) to the AUDIO/PARTY CHAIN IN L/R jacks on the unit using an audio cord (not supplied). 2 Press FUNCTION PAIRING repeatedly until the AUDIO IN indicator on the unit lights up. 3 Start playback on the connected equipment. 4 Adjust the volume. Adjust the volume of the connected equipment first. If the volume level is still too low, adjust the volume level on the system using the volume +/ buttons. Note The system may enter standby mode automatically if the volume level of the connected equipment is too low. In this case, increase the volume level of the equipment. To turn off the automatic standby function, see Setting the automatic standby function (page32). O t h e r O p e r a t i o n s 31GB GTK-XB60/XB90.4-697-227-11(1) Using an optional microphone Setting the automatic standby function You can output your voice from the system by connecting a dynamic microphone with a normal plug (not supplied). 1 Turn the MIC LEVEL knob to MIN to reduce the microphone volume level. 2 Connect an optional microphone to the MIC jack on the unit. 3 Adjust the volume using the MIC LEVEL knob. 4 Speak or sing into the connected microphone. Note When using the Wireless Party Chain or speaker add function, sound from the microphone is only output from the system to which the microphone is connected. By default, this system is set to turn off automatically in about 15 minutes when there is no operation or audio signal output. To turn off the function, hold down for more than 3 seconds while the system is turned on. To turn on the function, repeat the procedure. You can also configure this setting and make sure whether this function is turned on or off by using Sony | Music Center. For details on Sony | Music Center, see Using Sony | Music Center and Fiestable via BLUETOOTH connection
(page22). Notes The system may enter standby mode automatically if the volume level of the connected equipment is too low. In this case, increase the volume level of the equipment. The system doesnt enter standby mode when the MIC jack is in use. Saving the battery power You can save power and use the system for longer periods of time by turning on the STAMINA mode when using the system with the built-in battery (rechargeable). BATTERY to Press STAMINA turn on the STAMINA mode. The STAMINA light up. To deactivate the function, press STAMINA BATTERY again. BATTERY indicator will 32GB GTK-XB60/XB90.4-697-227-11(1) Troubleshooting If a problem occurs while operating the system, follow the steps described below before consulting your nearest Sony dealer. If an error message appears, be sure to make a note of the contents for reference. 1 Check to see if the problem is listed in this Troubleshooting section. 2 Check the following customer support websites. For customers in the USA:
http://esupport.sony.com/
For customers in Canada:
http://esupport.sony.com/CA For customers in Europe:
http://www.sony.eu/support For customers in Latin America:
http://esupport.sony.com/LA For customers in other countries/
regions:
http://www.sony-asia.com/
support You will find the latest support information and a FAQ at these websites. Note that if the service personnel changes some parts during repair, these parts may be retained. General The system does not turn on. Check that the AC power cord is connected securely. The system has entered standby mode. This is not a malfunction. The system enters standby mode automatically in about 15minutes when there is no operation or audio signal output
(page32). A d d i t i o n a l I n f o r m a t i o n 33GB Additional Information Information about compatible devices About supported USB devices This system supports USB Mass Storage Class only. This system supports FAT formatted USB devices only (except exFAT). Some USB devices may not work with this system. About BLUETOOTH communication for iPhone and iPod touch Made for iPhone 7 Plus iPhone 7 iPhone SE iPhone 6s Plus iPhone 6s iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPod touch (6th generation) iPod touch (5th generation) Websites for compatible devices Check the websites below for the latest information about compatible BLUETOOTH devices. For customers in the USA:
http://esupport.sony.com/
For customers in Canada:
http://esupport.sony.com/CA For customers in Europe:
http://www.sony.eu/support For customers in Latin America:
http://esupport.sony.com/LA For customers in other countries/
regions:
http://www.sony-asia.com/support GTK-XB60/XB90.4-697-227-11(1) Files cannot be played back. USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.*
If you use a partitioned USB device, only files on the first partition can be played back. Files that are encrypted or protected by passwords cannot be played back. Files with DRM (Digital Rights Management) copyright protection cannot be played back by this system.
* This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, refer to the operating instructions of each USB storage device or contact the manufacturer. BLUETOOTH device Pairing cannot be performed. Move the BLUETOOTH device closer to the system. Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. Make sure to enter the correct passkey when selecting the systems name (this system) on the BLUETOOTH device. The BLUETOOTH device cannot detect the system. Set the BLUETOOTH signal to on
(page21). There is noise, skipping, or distorted sound. You are using an unsupported USB device. See Information about compatible devices (page33). Turn off the system and reconnect the USB device, then turn on the system. The music data itself contains noise, or the sound is distorted. Noise may have been entered during music creation process using the computer. Create the music data again. The bit rate used when encoding an audio file was low. Send an audio file with higher bit rates to the USB device. The USB device is not recognized. Turn off the system and reconnect the USB device, then turn on the system. You are using an unsupported USB device. See Information about compatible devices (page33). The USB device is not working properly. Refer to the operating instructions of the USB device on how to deal with this problem. Playback does not start. Turn off the system and reconnect the USB device, then turn on the system. You are using an unsupported USB device. See Information about compatible devices (page33). Playback does not start from the first file. Set the play mode to normal play mode using Sony | Music Center
(page22). There is no sound. Adjust the volume. Check the connection of the optional equipment, if any. Turn on the connected equipment. Disconnect the AC power cord, then reconnect the AC power cord and turn on the system. There is severe hum or noise. Move the system away from sources of noise. Connect the system to a different wall outlet. Install a noise filter (commercially available) to the AC power cord. Turn off surrounding electrical equipment. There is acoustic feedback. Reduce the volume. USB device The connected USB device cannot be charged. Make sure the USB device is connected securely. The USB device does not work properly. If you connect an unsupported USB device, the following problems may occur. See Information about compatible devices (page33). The USB device is not recognized. Playback is not possible. The sound skips. There is noise. A distorted sound is output. There is no sound. The USB device is not connected correctly. Turn off the system, then reconnect the USB device. 34GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) There is noise, skipping, or distorted You are using an unsupported USB Turn off the system and reconnect the USB device, then turn on the The music data itself contains noise, or the sound is distorted. Noise may have been entered during music creation process using the computer. The bit rate used when encoding an audio file was low. Send an audio file with higher bit rates to the USB The USB device is not recognized. Turn off the system and reconnect the USB device, then turn on the You are using an unsupported USB properly. Refer to the operating instructions of the USB device on Turn off the system and reconnect the USB device, then turn on the You are using an unsupported USB Playback does not start from the first Set the play mode to normal play mode using Sony | Music Center Files cannot be played back. USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.*
If you use a partitioned USB device, only files on the first partition can be played back. Files that are encrypted or protected by passwords cannot be played back. Files with DRM (Digital Rights Management) copyright protection cannot be played back by this system.
* This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, refer to the operating instructions of each USB storage device or contact the manufacturer. BLUETOOTH device Pairing cannot be performed. Move the BLUETOOTH device closer to the system. Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. Make sure to enter the correct passkey when selecting the systems name (this system) on the BLUETOOTH device. The BLUETOOTH device cannot detect the system. Set the BLUETOOTH signal to on
(page21). Connection is not possible. The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. Enable the BLUETOOTH function of the BLUETOOTH device. Establish a connection from the BLUETOOTH device. The pairing registration information has been erased. Perform the pairing operation again. Erase the pairing registration information of the BLUETOOTH device by restoring the system to factory default settings (page37) and perform the pairing operation again (page15). Once all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete pairing information of the system on iPhone/iPod touch, and then perform the pairing procedure again. The sound skips or fluctuates, or the connection is lost. The system and the BLUETOOTH device are too far apart. If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. The sound of your BLUETOOTH device cannot be heard on this system. Increase the volume on your BLUETOOTH device first, then adjust the volume using the volume +/
buttons. A d d i t i o n a l I n f o r m a t i o n 35GB GTK-XB60/XB90.4-697-227-11(1) Restoring the system to the factory default settings If the system still does not operate properly, restore it to the factory default settings. 1 Disconnect and reconnect the AC power cord, and then turn on the system. 2 Hold down FUNCTION PAIRING and the volume button for more than 5seconds. After the , USB, and AUDIO IN indicators on the unit flash 2 times, all user-
configured settings, such as the pairing registration information, are restored to factory default settings. Resetting the system If the system doesnt respond and cannot be operated despite the power being on, turn off and reset the system using the RESET button. 1 Press RESET on the rear of the unit with a pin or other pointed object. The system will turn off. 2 Press to turn the system back on. Notes If the system doesnt turn back on, consult your Sony dealer. Pairing information is not deleted when you press RESET. There is severe hum, noise, or distorted sound. If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. Turn down the volume of the connected BLUETOOTH device. Party Chain and speaker add function Wired Party Chain function cannot be activated. Check the connections (page24). Make sure the audio cords are connected correctly. Select the function other than the Audio In function (page26). Wired Party Chain function does not work properly. Turn off the system. Then, turn it back on again to activate the Wired Party Chain function. Unable to connect a BLUETOOTH device with the system in the speaker add function. After connecting two GTK-XB60/XB90 systems, perform the pairing procedure between a BLUETOOTH device and the system where the
(BLUETOOTH) indicator is flashing. Then perform the BLUETOOTH connection. 36GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) If the system doesnt respond and power being on, turn off and reset the 1 Press RESET on the rear of the unit with a pin or other 2 Press to turn the system If the system doesnt turn back on, consult Pairing information is not deleted when Restoring the system to the factory default settings Precautions If the system still does not operate properly, restore it to the factory default settings. 1 Disconnect and reconnect the AC power cord, and then turn on the system. 2 Hold down FUNCTION PAIRING and the volume button for more than 5seconds. After the , USB, and AUDIO IN indicators on the unit flash 2 times, all user-
configured settings, such as the pairing registration information, are restored to factory default settings.
(BLUETOOTH), On safety Completely disconnect the AC power cord
(mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. AC power cord must be changed only at the qualified service shop. On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the system on surfaces that have been specially treated
(for example, wax, oil, polish) as staining or discoloration of the surface may result. Make sure not to splash water on the unit. This unit is not waterproof. A d d i t i o n a l I n f o r m a t i o n On heat buildup Heat buildup on the system during operation is normal and is not a cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. On the speaker system The built-in speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the system far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. 37GB GTK-XB60/XB90.4-697-227-11(1) Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display or operation. Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with this system, the communications environment, or surrounding conditions. Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only) Left/Right Channel:
With 3ohms loads, both channels driven, from 120 10,000Hz; rated 30watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250milliwatts to rated output. Speaker section GTK-XB60:
Tweeter: 50mm (2in) 2, cone type Woofer: 130mm (51/8 in) 2, cone type GTK-XB90:
Tweeter: 60mm (21/2 in) 3, cone type Woofer: 180mm (7in) 2, cone type Inputs AUDIO/PARTY CHAIN IN L/R:
Voltage xxV, impedance xxkilohms MIC:
Sensitivity: xxmV, impedance xxkilohms Outputs AUDIO/PARTY CHAIN OUT L/R:
Voltage xxV, impedance xxohms USB section and supported audio formats
(USB) port:
Type A, maximum current 2.1A Supported bit rate:
MP3 (MPEG1 Audio Layer-3):
32kbps 320kbps, VBR WMA: 32kbps 192kbps, VBR Sampling frequencies:
MP3 (MPEG1 Audio Layer-3):
32/44.1/48 kHz WMA: 44.1 kHz On BLUETOOTH Communication BLUETOOTH devices should be used within approximately 10 meters (33 feet)
(unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves are generated BLUETOOTH devices and wireless LAN
(IEEE 802.11b/g) equipment use the same frequency band (2.4 GHz). When using your BLUETOOTH device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:
Use this system at least 10 meters
(33 feet) away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your BLUETOOTH device within 10 meters
(33 feet). Use this system and BLUETOOTH device as closer to each other as possible. The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system and BLUETOOTH device in the following locations:
In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gases may be present Near automatic doors or fire alarms This system supports security functions that comply with BLUETOOTH specifications to ensure secure connections during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using BLUETOOTH technology. 38GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication BLUETOOTH devices that have the same BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display cut off depending on the BLUETOOTH the communications environment, or BLUETOOTH section Communication system:
BLUETOOTH Standard version 4.2 Output:
BLUETOOTH Standard Power Class 2 Maximum communication range:
Line of sight approx. 10 m (33 feet)1) Frequency band:
2.4 GHz band (2.4000 GHz 2.4835GHz) Modulation method:
FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2):
A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) BLE (Bluetooth Low Energy) HFP (Hands-free Profile) HSP (Headset Profile) SPP (Serial Port Profile) Supported codecs:
SBC (Sub Band Codec) AAC (Advanced Audio Coding) LDAC 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antennas performance, operating system, software application, etc. 2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. A d d i t i o n a l I n f o r m a t i o n 39GB Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only) Left/Right Channel:
With 3ohms loads, both channels driven, from 120 10,000Hz; rated 30watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250milliwatts to rated output. Speaker section GTK-XB60:
Tweeter: 50mm (2in) 2, cone type Woofer: 130mm (51/8 in) 2, cone type GTK-XB90:
Tweeter: 60mm (21/2 in) 3, cone type Woofer: 180mm (7in) 2, cone type Inputs AUDIO/PARTY CHAIN IN L/R:
Voltage xxV, impedance xxkilohms MIC:
Sensitivity: xxmV, impedance xxkilohms Outputs AUDIO/PARTY CHAIN OUT L/R:
Voltage xxV, impedance xxohms USB section and supported audio formats
(USB) port:
Type A, maximum current 2.1A Supported bit rate:
MP3 (MPEG1 Audio Layer-3):
32kbps 320kbps, VBR WMA: 32kbps 192kbps, VBR Sampling frequencies:
MP3 (MPEG1 Audio Layer-3):
32/44.1/48 kHz WMA: 44.1 kHz GTK-XB60/XB90.4-697-227-11(1) Usage life of the lithium-ion battery The times given below will be shorter if you charge and discharge the battery repeatedly. When STAMINA mode is turned off:
Speaker Lights On Off GTK-XB60 12hours1)/
3hours2) GTK-XB90 12hours1)/
3hours2) 14hours1)/
3.5hours2) 21hours1)/
3.5hours2) When STAMINA mode is turned on3):
Speaker Lights On Off GTK-XB60 13hours1)/
5hours2) GTK-XB90 15hours1)/
5hours2) 14hours1)/
5.5hours2) 21hours1)/
5.5hours2) 1) Measured using a predetermined music source with the volume level of the system set to 70 dB. The stated time may vary depending on the ambient temperature and conditions of use. 2) Measured using a predetermined music source with the volume level of the system set to the maximum. 3) The given times may vary depending on the playback content. General Power requirements:
GTK-XB60/GTK-XB90:
AC 120V, 60Hz Power consumption:
GTK-XB60: 35W GTK-XB90: 40W Standby power consumption:
GTK-XB60:
When BLUETOOTH standby mode is set to off: xxW (eco mode) When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on) GTK-XB90:
When BLUETOOTH standby mode is set to off: xxW (eco mode) When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on) Dimensions (W/H/D) (Approx.):
GTK-XB60:
265mm 549mm 276mm
(101/2in 21 5/8in 107/8in) GTK-XB90:
336mm 670mm 330mm
(131/4in 261/2in 13in) Mass (Approx.):
GTK-XB60: 8kg (30lb 14oz) GTK-XB90: 14kg (17lb 11oz) Quantity of the system:
1 piece Supplied accessories:
AC power cord (1) Design and specifications are subject to change without notice. License and Trademark Notice MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Google Play and Android are trademarks of Google Inc. LDAC and LDAC logo are trademarks of Sony Corporation. 40GB GTK-XB60/XB90.4-697-227-11(1) GTK-XB60/XB90.4-697-227-11(1) License and Trademark Notice MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. All other trademarks and registered trademarks are of their respective holders. In this manual, TM and marks are not specified. Google Play and Android are trademarks of Google Inc. LDAC and LDAC logo are trademarks of Sony Corporation. When BLUETOOTH standby mode is When BLUETOOTH standby mode is set to on: xxW (all wireless network When BLUETOOTH standby mode is When BLUETOOTH standby mode is set to on: xxW (all wireless network Design and specifications are subject to A d d i t i o n a l I n f o r m a t i o n 41GB GTK-XB60/XB90.4-697-227-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-05-26 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2017-05-26
|
||||
1 2 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0003739166
|
||||
1 2 | Physical Address |
1-7-1 Konan Minato-ku
|
||||
1 2 |
1-7-1 Konan
|
|||||
1 2 |
Tokyo, N/A
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
AK8
|
||||
1 2 | Equipment Product Code |
GTKXB90
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
R******** T******
|
||||
1 2 | Title |
Senior Manager
|
||||
1 2 | Telephone Number |
81-50********
|
||||
1 2 | Fax Number |
81-50********
|
||||
1 2 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/23/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Home Audio System | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output is conducted. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Audix Technology (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
S**** T****
|
||||
1 2 | Telephone Number |
86-75******** Extension:
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
s******@audix.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0014960 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0013990 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC