AV Center User Manual

 

G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT

\01US+00COV-U.fm masterpage:Right 01US+00COV-U.fm Page 1 Tuesday, January 17, 2012 6:12 PM 4-419-667-11(1) A V C e n t e r AV Center Operating Instructions Mode demploi Manual de instrucciones US FR ES Owners Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. XAV-601BT Serial No. XAV-601BT 2012 Sony Corporation XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US01INT-U.fm masterpage:Left 00US+00COV-U.book Page 2 Tuesday, January 17, 2012 6:08 PM Be sure to install this unit in the dashboard of the car for safety. For installation and connections, refer to the supplied Installation/Connections guide. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 2 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US01INT-U.fm masterpage:Right 00US+00COV-U.book Page 3 Tuesday, January 17, 2012 6:08 PM This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(S). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency

(RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from persons body (excluding extremities: hands, wrists, feet and ankles). For the State of California, USA only Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate Warning if your cars ignition has no ACC position Be sure to set the Auto Off function

(page 46). The unit will turn off automatically in the set time when no source is selected, which prevents battery drainage. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off. To cancel the demonstration (Demo) display, see page 46. 3 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US+00COV-UTOC.fm masterpage:Left 00US+00COV-U.book Page 4 Tuesday, January 17, 2012 6:08 PM Table of Contents Notes on safety . 6 Direct search play . 22 Notes on installation. 6 Copyrights . 6 Notes on Bluetooth function . 8 Playable discs and symbols used in these Operating Instructions . 9 Location and function of controls . 10 Main unit . 10 RM-X271 Remote Commander . 12 Getting Started Resetting the unit . 13 Performing initial settings . 13 Setting the clock . 14 Preparing the remote commander . 14 Detaching the front panel . 14 Attaching the front panel . 14 Radio Listening to the radio . 15 Reception controls . 15 Reception indications . 16 Storing and receiving stations . 16 Storing automatically BTM . 16 Storing manually . 16 Receiving stored stations. 16 RDS . 16 Overview . 16 Selecting PTY . 17 Discs Playing discs. 17 Playback controls. 18 Playback indications . 19 Using PBC (playback control) functions . 20 Configuring audio settings . 20 Changing the audio language/format. 20 Changing the audio channel . 21 Adjusting the audio output level Dolby D level . 21 Repeat and shuffle play . 21 4 USB Device Operations Playing from a USB device . 22 Playing USB Music . 22 Playing USB Video. 22 Playing USB Photo . 23 Repeat and shuffle play . 23 Enjoying music according to your mood SensMe . 24 Installing Media Go to your computer . 24 Registering a USB device using SensMe Setup . 24 Transferring tracks to the USB device using Media Go. 24 Playing tracks in channels SensMe channels . 24 iPod Operations Playing an iPod . 26 Setting the play mode . 26 Repeat and shuffle play . 27 Operating an iPod directly Passenger App Control . 27 Useful Functions Listing up tracks/images/video files List . 28 Selecting a track/image/video file. 28 Selecting a file type. 28 Searching for a track by listening to track passages ZAPPIN . 28 Controlling applications on your smartphone MirrorLink . 29 Enjoying different sources in front and rear Zone Zone . 29 Changing the color of buttons Dynamic Color Illuminator . 29 Customizing the display and button color Custom Color. 29 Using Gesture Command . 30 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US+00COV-UTOC.fm masterpage:Right 00US+00COV-U.book Page 5 Tuesday, January 17, 2012 6:08 PM Handsfree Calling and Audio Streaming Bluetooth function Before using the Bluetooth function . 31 Basic procedure of the Bluetooth function . 31 Bluetooth status indications . 31 Installing the microphone . 31 Pairing . 32 Searching from the Bluetooth device . 32 Connecting. 32 Handsfree calling. 33 Making calls . 33 Receiving calls . 34 Operations during a call . 35 Phonebook management . 35 Storing phonebook data . 35 Browsing a phonebook in a cellular phone. 36 Deleting phonebook data . 36 Call data management . 37 Call history . 37 Preset dial . 37 Bluetooth phone settings . 37 Audio streaming . 38 Listening to a Bluetooth device via this unit . 38 Operating a Bluetooth device with this unit . 38 General Settings about Bluetooth . 38 Pandora internet radio Playing back Pandora . 39 To connect the mobile device via the Bluetooth function . 39 To connect the iPhone. 39 Thumbs feedback . 39 Station list . 39 Bookmarking . 40 Creating a Station . 40 Deleting a Station . 40 Sound Adjustment Selecting the sound quality EQ7 . 40 Customizing the equalizer curve EQ7 Tune . 40 Adjusting the sound characteristics . 41 Optimizing sound for the listening position Intelligent Time Alignment . 41 Calibrating the listening position Intelligent Time Alignment Tune . 42 Speaker configuration and volume setup . 42 Creating a virtual center speaker CSO . 42 Using rear speakers like subwoofers Rear Bass Enhancer. 42 Adjusting the speaker volume . 43 Monitor Adjustment Touch panel calibration . 43 Adjusting the picture Picture EQ . 43 Customizing the picture . 44 Selecting the aspect ratio . 44 Settings Basic setting operation . 45 General Settings . 46 Sound Settings . 48 Visual Settings . 50 Source Settings . 51 Using Optional Equipment Auxiliary audio/video equipment . 53 SiriusXM Connect Tuner . 54 Rear view camera . 54 Rear view camera settings . 54 Additional Information Precautions . 55 Notes on LCD panel. 55 Notes on discs . 56 Playback order of MP3/WMA/AAC/JPEG/

Xvid/MPEG-4 files . 56 About iPod . 58 About Bluetooth function. 58 Maintenance . 59 Removing the unit. 60 Specifications . 60 Troubleshooting . 61 Error displays/messages . 64 Language code list . 67 5 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 6 Tuesday, January 17, 2012 6:08 PM Notes on safety Notes on installation

Comply with your local traffic rules, laws and regulations.

While driving Do not watch or operate the unit, as it may lead to distraction and cause an accident. Park your car in a safe place to watch or operate the unit. Do not use the setup feature or any other function which could divert your attention from the road. When backing up your car, be sure to look back and watch the surroundings carefully for your safety, even if the rear view camera is connected. Do not depend on the rear view camera exclusively.

While operating Do not insert your hands, fingers or foreign object into the unit, as it may cause injury or damage to the unit. Keep small articles out of the reach of children. Be sure to fasten seatbelts to avoid injury in the event of a sudden movement of the car. Preventing an accident Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, the picture is automatically switched to the background screen after displaying the caution below. Video blocked for your safety. The monitor connected to the REAR VIDEO OUT is active while the car is in motion. The picture on the display is switched to the background screen, but audio source can be heard. Do not operate the unit or watch the monitor while driving. 6

We recommend this unit should be installed by a qualified technician or service personnel. If you try to install this unit by yourself, refer to the supplied Installation/Connections guide and install the unit properly. Improper installation may cause battery drain or a short circuit.

If the unit does not work properly, check the connections first, referring to the supplied Installation/Connections guide. If everything is in order, check the fuse.

Protect the unit surface from damage. Do not expose the unit surface to chemicals, such as insecticide, hair spray, insect repellent, etc. Do not leave rubber or plastic materials in contact with the unit for a long time. Otherwise, the finish of the unit may be impaired, or deformation may occur.

When installing, be sure to fix securely.

When installing, be sure to turn the ignition off. Installing the unit with the ignition on may cause battery drain or a short circuit.

When installing, be sure not to damage any car parts such as pipes, tubes, fuel tank or wiring by using a drill, as it may cause a fire or an accident. Copyrights Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Microsoft, Windows, Windows Vista and Windows Media and logos are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. DVD VIDEO, DVD-R, DVD-RW, DVD+R, and DVD+RW are trademarks. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 7 Tuesday, January 17, 2012 6:08 PM ZAPPIN is a trademark of Sony Corporation. 12 TONE ANALYSIS and its logo are trademarks of Sony Corporation. WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. SensMe and the SensMe logo are trademarks or registered trademarks of Sony Ericsson Mobile Communications AB. Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-

related data from Gracenote, Inc., copyright 2000 to present Gracenote. Gracenote Software, copyright 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple, Macintosh and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. MirrorLink and the MirrorLink Logo are certification marks of the Car Connectivity Consortium LLC. Unauthorized use is strictly prohibited. THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-

COMMERCIAL USE OF A CONSUMER FOR DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO

(i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR

(ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM THIS PODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO DECODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR THE VC-1 STANDARD (VC-1 VIDEO) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/OR VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. 7 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 8 Tuesday, January 17, 2012 6:08 PM RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly. Emergency calls This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. BlackBerry is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. SiriusXM subscriptions and Connect Tuner are sold separately. www.siriusxm.com. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. All other trademarks are trademarks of their respective owners. Notes on Bluetooth function Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASERS TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. IMPORTANT NOTICE!

Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the users authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product. Driving Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Connecting to other devices When connecting to any other device, please read its user guide for detailed safety instructions. 8 Radio frequency exposure XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 9 Tuesday, January 17, 2012 6:08 PM Playable discs and symbols used in these Operating Instructions This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. Disc symbol in manual O E D V I I O D U A Disc format DVD VIDEO DVD-R*1/DVD-R DL*1/DVD-RW*1

(Video mode/VR mode) DVD+R*1/DVD+R DL*1/DVD+RW*1 Video CD

(Ver. 1.0/1.1/2.0) Audio CD CD-ROM*2/CD-R*2/CD-RW*2

*1 Audio files can also be stored.

*2 Video/image files can also be stored. Note DVD may be used in these Operating Instructions as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/DVD+RWs. The following chart shows the supported file types and their symbols. Available functions differ depending on the format, regardless of disc type. The format symbols below appear in these Operating Instructions next to the description of functions available for their corresponding file types. Format symbol in manual File type MP3 audio file WMA audio file AAC audio file WAVE audio file JPEG image file Xvid video file WMV video file MPEG-4 MPEG-4 video file AVC (H.264 baseline) video file Tip For details on compression formats, see page 57. Note Even compatible discs may not be playable on this unit, depending on their recording condition. 9 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 10 Tuesday, January 17, 2012 6:08 PM Location and function of controls Main unit For details, see the pages listed below. A Z (Eject) button page 17 B HOME button Press to open HOME menu. C DSPL/M.OFF button Press to change display items. Press and hold to turn off the monitor and the button illumination. To turn back on, touch anywhere on the display. D Disc slot page 17 E Receptor for the remote commander F USB terminal Open the cover to connect a USB device. G Front panel release button H Volume control dial, SOURCE/OFF button*

Rotate to adjust the volume. Press to turn on the power/change the source:

Tuner (Radio), Pandora (Bluetooth Pandora) , MirrorLink, iPod, USB Music, USB Video, Disc, BT Audio

(Bluetooth Audio), AUX (Auxiliary equipment). Press and hold for 1 second to exit the source. Press and hold for more than 2 seconds to turn off. I Reset button page 13

(located behind the front panel) J Display/touch panel

* If a SAT tuner is connected and (SOURCE/OFF) is pressed, the connected device (SXM) will appear on the display. 10 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 11 Tuesday, January 17, 2012 6:08 PM Screen displays Indication list:

Source list:

A ATT (Attenuate) B ZONE ZONE C SXM (SiriusXM) D Pandora E Bluetooth status indications page 31 F Clock page 14 G ZONE ZONE key Touch to activate Zone Zone. H Option key Touch to open HOME Option menu. I Source select keys*

Touch to change the source: Tuner

(Radio), Pandora (Bluetooth Pandora) , MirrorLink, BT Phone (Bluetooth Phone), iPod, USB Music, USB Video, USB Photo, Disc, BT Audio

(Bluetooth Audio), Rear View, AUX

(Auxiliary equipment), Settings.

* If a SAT tuner is connected and (SOURCE/OFF) is pressed, the connected device (SXM) will appear on the display. Tip Touch and hold anywhere on the screen to display the menu item list. 11 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 12 Tuesday, January 17, 2012 6:08 PM RM-X271 Remote Commander

The remote commander can be used to operate the audio controls. For menu operations, use the touch panel.

For details, see the pages listed below.

Remove the insulation film before use

(page 14). A OFF button Press to exit the source/stop the source. Press and hold to turn off. B DSPL button Press to change display items. C MONITOR OFF button Press to turn off the monitor and the button illumination. To turn back on, press again. D POSITION button Press to switch the listening position (Front L/Front R/Front/All/Custom/

OFF). E O (Return) button Press to return to the previous display/return to the menu on a VCD*1. F EQ (Equalizer) button Press to select an equalizer curve from 7 music types (Xplod/Vocal/Edge/

Cruise/Space/Gravity/Custom/

OFF). G Number buttons page 22 Radio:

Press to receive stored stations. Press and hold to store stations. Disc/iPod:

Press to locate a title/chapter/track. H CLEAR button Press to delete an entered number. I ZZ (Zone Zone) button page 29 Press to activate Zone Zone. J ATT (Attenuate) button Press to attenuate the sound. To cancel, press again. K u (Play/Pause) button L .m/M> buttons Radio:

Press to tune to stations automatically. Press and hold to find a station manually. Disc*2/USB/iPod:

Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/

fast-forward video. Press and hold to reverse/fast-forward a track. Bluetooth Audio*3:

Press to skip a track. Press and hold to reverse/fast-forward a track. Pandora:

Press to skip a track. M DVD playback setting buttons Press to change the audio language/format.

(For a VCD, to change the audio channel.)

(AUDIO):

(SUBTITLE):

(ANGLE):

(TOP MENU):

(MENU):

Press to change the subtitle language. Press to change the viewing angle. Press to open the top menu on a DVD. Press to open the menu on a disc. 12 N ZAP button Press to enter ZAPPIN mode. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 13 Tuesday, January 17, 2012 6:08 PM O </M/m/, (Cursor)/ENTER buttons page 17 Press to control the menu on a DVD. P SRC (Source) button Press to turn on/change the source: Tuner

(Radio), iPod, USB Music, USB Video, Disc, BT Audio (Bluetooth Audio), AUX (Auxiliary equipment), Pandora (Bluetooth Pandora). Q MODE button*5 Press to select the radio band (FM/AM)/

select an auxiliary device (AUX1/AUX2)*5. R VOL (Volume) +/ buttons

*1 When playing with PBC functions.

*2 Operation differs depending on the disc (page 18).

*3 Operation differs depending on the connected Bluetooth device.

*4 If a SAT tuner is connected and (SRC) is pressed, the connected device (SXM) will appear on the display.

*5 When two auxiliary devices are used. Note The remote commander will not operate when the unit is turned off and the display has disappeared. Press

(SOURCE/OFF) on the main unit, or insert a disc to activate the unit and enable operation via the remote commander. Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button (page 10) with a pointed object, such as a ballpoint pen. Note Pressing the reset button will erase the clock setting and some stored contents. Performing initial settings After resetting, the display for the initial settings appears. Initial Setting Subwoofer OFF / ON Listening Position Front L / Front R Language English OK 1 Touch No on the demo setting display. 2 Touch Subwoofer to set the subwoofer connection status. Set to ON if a subwoofer is connected, or OFF if not. 3 Touch Listening Position to set the listening position. Set to Front L if your listening position is front left, or Front R if front right. 4 Touch Language to set the display language. Touch repeatedly until the desired language

(English/French/Spanish/Portuguese/Russian/

Dutch/German/Italian) appears. 5 Touch OK. The setting is complete. This setting can then be further configured in the setting menu.

For details on setting the subwoofer connection status, see page 49.

For details on setting the listening position, see Optimizing sound for the listening position Intelligent Time Alignment on page 41.

For details on setting the character encoding, see page 46. 13 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 14 Tuesday, January 17, 2012 6:08 PM

For details on setting the display language, see page 46. Detaching the front panel Note Some characters may not be displayed correctly, depending on the language/country/region. Setting the clock The clock uses a 12-hour indication. 1 Press (HOME), then touch 2 Touch The setting display appears. 3 Set the hour and minute.

, then touch Clock Adjust. For example, to set to 8:30, touch 0830. 4 Touch AM or PM. 5 Touch OK. The setting is complete. You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press and hold (SOURCE/OFF). The unit is turned off. 2 Press

, then pull it off towards you. To activate/deactivate the CT function, touch CT in step 3. (page 46) To delete an entered number, touch Clear. To return to the previous display, touch

. Notes

The CT function may not work even though an RDS station is being received.

There may be a difference between the time set by the CT function and the actual time. Notes

Do not drop or put excessive pressure on the front panel and display window.

Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.

Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged. Preparing the remote commander Before using the remote commander for the first time, remove the insulation film. Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. 14 Note Do not put anything on the inner surface of the front panel. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 15 Tuesday, January 17, 2012 6:08 PM Radio Listening to the radio 1 Press (HOME), then touch Tuner. The radio reception display appears, and the preset list is displayed automatically. Source List ATT Top P1 P4 P2 P5 P3 P6 BTM Memory Band Receive Menu Preset List PTY List 2 Touch the current band. The band list appears. 3 Touch the desired band (FM1, FM2, FM3, AM1, or AM2). 4 Perform tuning.

/

To tune automatically Touch Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. To tune manually Touch frequency is received. To skip frequencies continuously, touch and hold repeatedly until the desired

/

/

. Reception controls Touch the display if the reception controls are not displayed. 1 2 Source List ATT 3 Top Band Receive Menu Preset List PTY List 4 5 6 7 8 9

/

Touch to tune manually. Touch and hold to continuously skip frequencies.

/

Touch to tune automatically. 1 2 3 Touch to change Visualizer, which contains the following items:

Gate/Balloon/Glow/Animal/Graffiti/Ink/

Random 4 PTY Touch to open the PTY list. (page 17) 5 Preset number Touch to store stations. 6 Touch to register the preset list. 15 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 16 Tuesday, January 17, 2012 6:08 PM Reception indications RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items A Current source icon*

B Band name, frequency/status C Preset number

* Appears only when the controls are displayed. Storing and receiving stations Caution When tuning to stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically BTM 1 Press (HOME), then touch Tuner. Select the desired band (FM1, FM2, FM3, AM1, or AM2). 2 Touch BTM. The unit stores the first six available stations in the preset list (1 to 6). A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you

, then touch a want to store, touch number in the list (1 to 6). Note If you try to store another station to the same number, the previously stored station will be replaced. Receiving stored stations 1 Select the band. 2 Touch the desired number (1 to 6). 16 A Band name, preset number, frequency B RDS*, TP C Program service name

* During RDS reception. RDS services This unit automatically provides RDS services as follows:

PTY (Program Types) Displays the currently received program type. Also searches for a designated program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes

Depending on the country/region, not all RDS functions may be available.

RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 17 Tuesday, January 17, 2012 6:08 PM Selecting PTY 1 During FM reception, touch PTY. The PTY list appears if the station is transmitting PTY data. To scroll the list, move the scrollbar up and down. 2 Touch the desired program type. The unit searches for a station broadcasting the selected program type. To close the PTY list, touch PTY. Type of programs News (News), Information

(Information), Sports (Sports), Talk

(Talk), Rock (Rock), Classic Rock

(Classic Rock), Adult Hits (Adult Hits), Soft Rock (Soft Rock), Top 40 (Top 40), Country (Country), Oldies (Oldies), Soft (Soft), Nostalgia (Nostalgia), Jazz (Jazz), Classical (Classical), Rhythm and Blues (Rhythm and Blues), Soft R & B (Soft Rhythm and Blues), Foreign Language (Foreign Language), Religious Music (Religious Music), Religious Talk (Religious Talk), Personality (Personality), Public

(Public), College (College), Weather

(Weather) Notes

You cannot use this function in countries/regions where no PTY data is available.

You may receive a different radio program from the one you select. Discs Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. 1 Insert the disc (label side up). Playback starts automatically. If the DVD menu appears Touch the item in the DVD menu. You can also use the menu control panel, which can be displayed by touching outside of the DVD menu. Touch b/v/V/B to move the cursor, then touch Enter to confirm. If the menu control panel does not appear by touching the display, use the remote commander. About the DVD menu A DVD is divided into several sections, which make up a picture or music feature. These sections are called titles. When you play a DVD that contains several titles, you can select a desired title using the DVDs top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu. To stop playback Press and hold (SOURCE/OFF) for 1 second. Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. To eject the disc 1 Press Z on the main unit. The disc is ejected. 17 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 18 Tuesday, January 17, 2012 6:08 PM Playback controls Touch the display if the playback controls are not displayed. 9 q;

Common to all discs/formats Source List ATT Top Source List ATT Top DVD Control Play Menu SHUF 7 MPEG-4 Source List ATT Top Play Menu SHUF Album 9 List q;

18 ZAP List Play Menu SHUF Album qa 1 ./>

Touch to skip a chapter/track/scene/

image/file. Touch and hold momentarily to reverse/

fast-forward the video; and then repeatedly to switch the speed ( 2 t 12 t 120 t 2 )*1. To cancel, touch u. Touch and hold to reverse/fast-forward the audio track. During pause, touch and hold down >

to play the video in slow motion. To cancel, release the key. 2 u Touch to pause/resume play after pause. 3 Play Menu Touch to open the play menu, which contains the following items.

Dolby D Level (DVD VIDEO playback only) (page 21)

Stereo (VCD playback only)

(page 21)

Image Turn (JPEG playback only):

Touch to rotate an image left/right.

Audio (Xvid/MPEG-4 playback only) 4 Repeat 5

/Shuffle

(page 21) Touch to change Visualizer, which contains the following items:

Gate/Balloon/Glow/Animal/Graffiti/Ink/

Random 6 Touch to open the option menu. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 19 Tuesday, January 17, 2012 6:08 PM 7 DVD Control Touch to open the DVD control menu, which contains the following items.

Top Menu: Touch to open the top menu on the DVD.*2

Menu: Touch to open the menu on the disc.*2

Audio: Touch repeatedly to select the audio language/format. (page 20)*2

Subtitle: Touch repeatedly to turn off/select the subtitle language.*2*3

Angle: Touch repeatedly to change the viewing angle.*2 8 Touch to list up tracks/images/video files.

(page 28) During iPod playback, touch the top menu (Root). During Disc playback, touch the top menu (Root). to list up to list up

*1 The speed depends on the format or the recording method.

*2 Availability depends on the disc.

*3 When the 4-digit input prompt appears, input the language code (page 67) for the desired language. Note If the disc contains multiple file types, only the selected file type (audio/video) can be played. For details on how to select the file type, see Selecting a file type on page 28. Notes on JPEG playback (except for discs)

If a large-sized image is rotated, it may take longer to display.

Progressive JPEG files cannot be displayed. Playback indications Touch the display if the indications are not displayed. For audio discs, some indications are always displayed during playback. A MPEG-4 Source List ATT Top DVD Control Play Menu SHUF 15 B C D E F Source List ATT Top ZAP List Play Menu SHUF Album G A Current source icon B Volume level*1 C Format, playback status, elapsed playback time*2, chapter/title/album (folder)/track number*3*4, audio format*5 D Playback status, elapsed playback time*2 E Track name, album name, artist name F Format, track number, album number*6

*1 When ATT is activated,

*2 During JPEG playback or VCD playback with PBC appears. functions, no indication appears.

*3 Indications differ depending on the disc/format.

*4 When playing a VCD with PBC functions

(page 20), no indication appears.

*5 DVD only.

*6 MP3/WMA/AAC only. 19 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 20 Tuesday, January 17, 2012 6:08 PM Using PBC (playback control) functions Configuring audio settings Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. The PBC menu interactively assists with operations while a PBC-compatible VCD is played. 1 Start playing a PBC-compatible VCD. The PBC menu appears. 2 Press the number buttons on the remote commander to select the desired item, then press (ENTER). 3 Follow the instructions in the menu for interactive operations. To return to the previous display, press O on the remote commander. Playing without PBC functions 1 Press (HOME), then touch

. 2 Touch

. The source setting menu appears. 3 Move the scrollbar up and down, then touch Video CD PBC to set to OFF. 4 Start playing a VCD. The PBC menu does not appear during playback. Notes

The items on the menu, and operation procedures differ depending on the disc.

During PBC playback, the track number, playback item, etc., do not appear on the playback display.

Resume playback is unavailable during playback without PBC. 20 Changing the audio language/

format The audio language can be changed if the disc is recorded with multilingual tracks. You can also change the audio format when playing a disc recorded in multiple audio formats (e.g., Dolby Digital). 1 During playback, touch the screen. appears in the display. 2 Touch Audio repeatedly until the desired audio language/format appears. Audio language Source List ATT Top Audio 1: English Dolby D 3/2.1 Audio Subtitle Angle Top Menu Menu DVD Control Play Menu SHUF Audio format/channel numbers*

The audio language switches among the available languages. When the 4-digit input prompt appears, input the language code (page 67) for the desired language. When the same language is displayed two or more times, the disc is recorded in multiple audio formats.

* The format name and channel numbers appear as follows:

Example: Dolby Digital 5.1 ch Rear channel 2 Dolby D 3 / 2 . 1 Front channel 2 +

Center channel 1 LFE channel 1 To close the DVD control menu, touch DVD Control. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 21 Tuesday, January 17, 2012 6:08 PM Changing the audio channel Repeat and shuffle play MPEG-4 When playing a VCD/CD/MP3/WMA/AAC/

Xvid/MPEG-4, you can listen to both the right and left channel, only the right channel, or only the left channel via both the right and left speakers. The options are indicated below. Stereo: Standard stereo sound (default) 1/Left: Left channel sound (monaural) 2/Right: Right channel sound (monaural) For VCD/CD/MP3/WMA/AAC 1 During playback, touch Play Menu, then Stereo repeatedly until the desired audio channel appears. To close the play menu, touch Play Menu. Note You may not be able to change the audio setting depending on the disc. Tips

Operation via the remote commander by pressing

(AUDIO) repeatedly is also available.

The audio channels can be changed by pressing AUDIO on the remote commander when VCD is selected. Adjusting the audio output level Dolby D level You can adjust the audio output level for a DVD recorded in Dolby Digital format, to reduce the volume level differences between discs. 1 During playback, touch 2 Touch /+ repeatedly to adjust the

. output level. The output level is adjustable in single steps, between 10 and +10. To close the play menu, touch Play Menu. MPEG-4 1 During playback, touch Repeat or Shuffle desired option appears. repeatedly until the Source List ATT Top Chapter OFF ON Repeat Shuffle Adjust Dolby D Level 0 DVD Control Play Menu SHUF Repeat or shuffle play starts. To close the play menu, touch Play Menu. The repeat options and switching order of each disc/format are indicated below. Disc/format Options

*1 OFF: Returns to normal play mode. Chapter: Repeats the current chapter. Title: Repeats the current title. OFF: Returns to normal play mode. Track: Repeats the current track. OFF: Returns to normal play mode. Track: Repeats the current track. All: Repeats the current album (folder). OFF: Returns to normal play mode. Movie: Repeats the current video file. All: Repeats the current album (folder). MPEG-4 The shuffle options and switching order of each disc/format are indicated below. Disc/format Options

*2 OFF: Returns to normal play mode. Title: Plays chapters in the current title in random order. 21 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 22 Tuesday, January 17, 2012 6:08 PM

*1 OFF: Returns to normal play mode. Disc: Plays tracks in the current disc in random order. OFF: Returns to normal play mode. Album: Plays tracks/images/

video files in the current album

(folder) in random order. MPEG-4

*1 Available only when playing a version 1.0/1.1 VCD, or a version 2.0 VCD without PBC functions.

*2 Excluding a DVD-R/DVD-R DL/DVD-RW in VR mode. Direct search play MPEG-4 You can directly locate a desired point by specifying the title number, chapter number, etc. 1 During playback, press the number buttons on the remote commander to enter an item (track, title, etc.) number, then press (ENTER). Playback starts from the beginning of the selected point. The search items for a disc/format are as follows:

DVD: Title or chapter*1 VCD*2/CD/MP3/WMA/AAC: Track Xvid/MPEG-4: Movie

*1 The search item depends on the setting.

*2 Available only when playing a VCD without PBC functions. Setting the search item (DVD only) You can set the search item (title or chapter) for DVD playback. 1 Press (HOME), then touch 2 Touch

. The source setting menu appears. 3 Touch DVD Direct Search to set to Chapter or Title. The setting is complete. To return to the previous display, touch

. 22 USB Device Operations

MSC (Mass Storage Class) can be used.

Compatible codecs are MP3 (.mp3), WMA

(.wma), AAC/HE-AAC (.m4a), JPEG (.jpg), Xvid (.avi/.xvid), and MPEG-4 (.mp4).

Backup of data in a USB device is recommended. Notes

Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine.

A large-sized file may take time to start playing.

This unit does not recognize multiple MSC devices. Playing from a USB device Playing USB Music 1 Open the USB cover, then connect the USB device to the USB connector with a USB cable (not supplied). 2 Press (HOME), then touch USB Music, to start playback. To select a music file 1 During playback, touch The music list appears. 2 Touch the desired item. Playback starts. To enter ZAPPIN mode For details on this procedure, see Searching for a track by listening to track passages ZAPPIN on page 28. Playing USB Video 1 Open the USB cover, then connect the USB device to the USB connector with a USB cable (not supplied). 2 Press (HOME), then touch USB Video, to start playback. To select a video file 1 During playback, touch The video list appears. 2 Touch the desired item. Playback starts. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 23 Tuesday, January 17, 2012 6:08 PM To select the aspect ratio 1 Press (HOME), then touch USB Video. 2 Touch 3 Touch Zoom Settings.

, then Settings. The options are indicated below. Normal: Picture with 4:3 aspect ratio (regular picture). Wide: Picture with 4:3 aspect ratio enlarged to the left and right edges of the screen. Off: Picture with full size. Playing USB Photo 1 Open the USB cover, then connect the USB device to the USB connector with a USB cable (not supplied). 2 Press (HOME), then touch USB Photo. 3 Touch All pictures, or Folders, to start playback. To select a photo file 1 During playback, touch The photo list appears. 2 Touch the desired item. Playback starts. Note This creates folders called Sony Automotive on the USB device. About the playback controls and indications You can control USB playback in the same way as disc playback. For details, see Playback controls on page 18. For details on playback indications, see Playback indications on page 19. To stop playback Press and hold (SOURCE/OFF) for 1 second. To disconnect the USB device Stop playback, then disconnect. Do not disconnect during playback, as data in the USB device may be damaged. Notes on use

Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection.

Do not leave a USB device in a parked car, as malfunction may result.

This unit cannot recognize USB devices via a USB hub.

Be sure to use the USB cable supplied with the device if a cable is needed when making a USB connection. Notes on playback

Select USB Music, USB Video, or USB Photo depending on the file type of USB device.

Displayed indications will differ, depending on the USB device, recorded format and settings. For details, visit the support site on the back cover.

The maximum number of displayable data is as follows:

folders (albums): 256 files (tracks): 10,000

It may take time for playback to begin, depending on the amount of recorded data.

DRM (Digital Rights Management) files may not be played.

During playback or reverse/fast-forward of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately.

Playback of a lossless compression file is not supported. Repeat and shuffle play 1 During playback, touch Repeat repeatedly until the or Shuffle desired option appears. Repeat or shuffle play starts. The repeat options are as follows:

For Music playback OFF: Returns to normal play mode. 1 Track Repeat: Repeats the current music file. All Repeat: Repeats the all current album

(folder). For Photo playback OFF: Returns to normal play mode. All Repeat: Repeats the all current album

(folder). The shuffle options are as follows:

For Music playback OFF: Returns to normal play mode. All: Plays music files in the all current album

(folder) in random order. To close the play menu, touch Play Menu. 23 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 24 Tuesday, January 17, 2012 6:08 PM Enjoying music according to your mood SensMe Sonys unique SensMe channels feature automatically group tracks by channel or mood, and allow you to enjoy music intuitively. Installing Media Go to your computer Software (Media Go) is required to enable the SensMe function on this unit. 1 Download Media Go software from the support site on the back cover. 2 Follow the on-screen instructions to complete the installation. Registering a USB device using SensMe Setup USB device registration is required to enable the SensMe function on the unit. If registration is not performed along with the installation procedure, follow the steps below. 1 Start SensMe Setup on your computer. 2 Connect a USB device to your computer. 3 Complete registration following the on-screen instructions. Tip If you connect a registered USB device containing analyzed tracks, the USB device can be unregistered again. Transferring tracks to the USB device using Media Go To enable the SensMe function on this unit, tracks need to be analyzed and transferred to the registered USB device using Media Go. 1 Connect the registered USB device to your computer. For WALKMAN, connect via MTP mode. For USB devices other than WALKMAN, connect via MSC mode. Media Go starts automatically. If a message appears, follow the on-screen instructions to proceed. 2 Drag and drop tracks from Windows Explorer or iTunes, etc., to Media Go. The analysis and transfer of tracks starts. For details on operations, refer to the Help of Media Go. Note The track analysis by 12 TONE ANALYSIS may take time, depending on the computer environment. Tip Not only audio files but also image or video files can be transferred using Media Go. For details, refer to the Help of Media Go. Playing tracks in channels SensMe channels SensMe channels automatically group tracks into channels by their tunes. You can select and play a channel that fits your mood, activity, etc. 1 Connect a USB device set up for the SensMe function. 2 Press (HOME), then touch USB Music. 3 Touch channels. The channel list appears. Shuffle All Energetic Relax ZAP 4 Touch v/V to scroll the channel list. Playback of the first track in the current channel starts from the tracks most melodic or rhythmical section*.

* May not be detected correctly. 5 Touch the desired channel. Playback of tracks in the selected channel starts. 24 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 25 Tuesday, January 17, 2012 6:08 PM SensMe channels playback controls and indications A B C D E Shuffle All Energetic Relax ZAP F HG A Option key B To scroll the list and select another channel. C Indicates the current channel. D Indicates the album artwork display*. E Indicates the elapsed playback time, track name and artist name. F To pause/resume play after pause. G To skip a track.

* The recommended size is from 240 240 to 960 960 pixels. Notes

Depending on the track, it may not be detected correctly or may be grouped in a channel not suited to the tracks mood.

If the connected USB device contains many tracks, it may take time for SensMe channels to start, due to data reading. Tip Tracks are played in random order. The order will vary with each channel selection. Channel list x Recommended Morning (5:00 AM 9:59 AM) Daytime (10:00 AM 3:59 PM) Evening (4:00 PM 6:59 PM) Night (7:00 PM 11:59 PM) Midnight (12:00 AM 4:59 AM) Plays music for various times of the day. Set the clock (page 14) for the channel to be displayed accurately. x Basic channels Plays tracks according to the music type. Relax: Plays calm and relaxing music. Mellow: Plays soft and slow-tempo music. Upbeat: Plays cheerful and uplifting music. Emotional: Plays ballads. Sofa Lounge: Plays jazz and easy listening music. Dance Floor: Plays rhythm, rap and R & B music. Extreme: Plays loud and powerful music. Active: xxxx 25 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 26 Tuesday, January 17, 2012 6:08 PM iPod Operations For details on the compatibility of your iPod, see About iPod on page 58 or visit the support site on the back cover. In these Operating Instructions, iPod is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. Note This unit does not recognize multiple iPods. Playing an iPod 1 Reduce the volume on this unit. 2 Connect the iPod to the USB connector with its USB cable (not supplied). Use of the optional USB connection cable RC-202IPV is recommended.*1 The following display appears on the iPod screen*2, then playback starts from the item last played. If an iPod is already connected, to start playback, touch iPod.

*1 To play videos from an iPod with video, use of the RC-202IPV is required.

*2 May not appear in the case of an iPod touch or iPhone being connected, or when the iPod was last played using Passenger App Control. 3 Adjust the volume on this unit. About playback controls and indications You can control iPod playback in the same way as disc playback. For details, see Playback controls on page 18. For details on playback indications, see Playback indications on page 19. To stop playback Press and hold (SOURCE/OFF) for 1 second. 26 To disconnect the iPod Stop playback, then disconnect. Do not disconnect during playback, as data in the iPod may be damaged. To enter ZAPPIN mode For details on this procedure, see Searching for a track by listening to track passages ZAPPIN on page 28. About resuming mode When the iPod currently playing is connected to the dock connector, the mode of this unit changes to resuming mode and playback starts in the mode set by the iPod. In resuming mode, repeat/shuffle play are not available. Caution for iPhone When you connect an iPhone via USB, telephone volume is controlled by the iPhone itself. In order to avoid emitting sudden loud sound after a call, do not increase the volume on the unit during a call. Note This unit cannot recognize an iPod via a USB hub. Tips

When the ignition key is turned to the ACC position with the unit on, the iPod will be recharged.

If the iPod is disconnected during playback, USB device is not connected. appears on the display of the unit. Setting the play mode You can set one of the following play modes. For audio playback ALBUM, TRACK, GENRE, PLAYLIST, ARTIST, MUSIC PODCAST*

For video playback MOVIE, RENTAL, TV SHOW, MUSIC VIDEO, VIDEO PLAYLIST, VIDEO PODCAST*

* May not appear depending on iPod setting. 1 During playback, touch 2 Touch 3 Touch the desired play mode. or

. To start playback, touch the desired item(s) in the list. To scroll the list, move the scrollbar up and down. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 27 Tuesday, January 17, 2012 6:08 PM Operating an iPod directly Passenger App Control You can directly operate an iPod connected to this unit. 1 During playback, touch

. Deactivating the Passenger App Control During Passenger App Control, touch Cancel button. The play mode changes to resuming mode. To close the play menu, touch Play Menu. Notes

App image and Video can only be displayed on this unit while the parking brake is applied.

App and Video are only controllable from iPhone

Apps compatible with Passenger App Control are and iPod. limited.

To output video to this unit, you need to activate the video output of the iPod.

The volume can be adjusted only by this unit.

The repeat and shuffle settings will be off if the Passenger App Control mode is canceled. Repeat and shuffle play 1 During playback, touch Repeat repeatedly until the desired or option appears. Repeat or shuffle play starts. To close the play menu, touch Play Menu. The repeat options are as follows:

For audio playback OFF: Returns to normal play mode. TRACK: Repeats the current track. ALBUM/MUSIC PODCAST/ARTIST/

PLAYLIST/GENRE*: Repeats the current item of the selected play mode. For video playback OFF: Returns to normal play mode. TRACK: Repeats the current video. RENTAL/TV SHOW/MUSIC VIDEO/

VIDEO PLAYLIST/VIDEO PODCAST*: Repeats the current item of the selected play mode. The shuffle options are as follows:

For audio playback OFF: Returns to normal play mode. ALBUM/MUSIC PODCAST/ARTIST/

PLAYLIST/GENRE*: Plays tracks of the selected play mode in random order. Device: Plays all tracks in an iPod in random order.

* Differs depending on the selected play mode. Note Displayed options may not conform to actual operation. 27 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 28 Tuesday, January 17, 2012 6:08 PM Useful Functions Listing up tracks/images/video files List Selecting a track/image/video file MPEG-4 You can list up albums/folders/tracks/images/

video files, and select a desired one to play. This function is convenient especially for the disc in MP3/WMA/AAC/Xvid/MPEG-4 format containing many albums/tracks, etc. 1 During playback, touch

. The list of categories or files from the currently played item appears. 3 Touch the desired file. Playback of the selected file starts. Searching for a track by listening to track passages ZAPPIN While playing short track passages from a USB device or an iPod in sequence, you can search for a track you want to listen to. This function is convenient, for example, when searching for a track in shuffle or shuffle repeat mode. 1 During audio playback, touch ZAP. Playback starts from a passage of the next track. The passage is played for the set time. Page position bar To move to the upper level, touch To scroll the list, move the scrollbar up and down. To jump pages, touch the page position bar. 2 Touch the desired item. Playback starts. Tip When iPod is selected, the initial search function is also available (page 26). Selecting a file type MPEG-4 If the disc/USB device contains multiple file types, only the selected file type (audio/video/

photo) can be played. The playback priority order of file type is initially set to audio, video, then photo (e.g., if the disc contains video files and image files, only video files are played). You can select the file type to list up, then select the desired file to play. 1 During playback, touch 2 Touch to select the file type. or

. 28 ZAP touched. 2 Touch ZAP when a track you want to The playback section of each track in ZAPPIN mode. listen to is played. The track that you select returns to normal play mode from the beginning. To search for a track via ZAPPIN mode again, repeat steps 1 and 2. In the case of USB Music playback If you enter ZAPPIN mode during USB Music playback, the most melodic or rhythmical sections of tracks are played. Note Tracks need to be analyzed by 12 TONE ANALYSIS. Tips

You cannot select the track passage to play.

You can select the playback time 6sec, 15sec, 30sec for the ZAPPIN function. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 29 Tuesday, January 17, 2012 6:08 PM Controlling applications on your smartphone MirrorLink Changing the color of buttons Dynamic Color Illuminator This function duplicates the smartphones display on the in-car display, so you can control applications on your smartphone with the bigger screen. Only a smartphone compatible with the MirrorLink function can be used. 1 Connect your smartphone and the unit via USB cable. 2 Press (HOME), then touch MirrorLink. The smartphones display appears on the in-

car display. Touch and control applications in the same way as you do on your smartphone. Enjoying different sources in front and rear Zone Zone You can simultaneously enjoy different sources in the front and rear of the car. Selectable sources for this unit (front) and the rear monitor (rear) are indicated below. Front: Any source. Rear: Disc inserted in this unit. 1 Press (HOME) on the main unit. 2 Touch ZONE ZONE to activate Zone Zone. To operate the source in the front, use the touch panel and buttons on the main unit. To operate the source in the rear, use the remote commander. Tip You can also activate/deactivate Zone Zone by pressing (Z x Z) on the remote commander. To deactivate Zone Zone Touch Zone Zone again in the HOME menu. Notes

Once (SOURCE/OFF) on the main unit or remote commander is pressed, Zone Zone is deactivated.

While Zone Zone is activated, the following buttons on the remote commander become inactive:

(SRC), (MODE), (ATT), (VOL) +/, (CLEAR), number buttons.

While Zone Zone is activated, the following are deactivated. EQ7 (page 40) Balance/Fader/Subwoofer (page 48) Intelligent Time Alignment (page 41) CSO (page 42) HPF, LPF (page 49) Rear Bass Enhancer (page 42) Dynamic Color Illuminator allows you to change the color of the buttons on the main unit to match the car's interior. You can select from 12 preset colors, customized color and 5 preset patterns. x Preset colors Red, Amber, Medium Amber, Yellow, White, Light Green, Green, Light Blue, Sky Blue, Blue, Purple, Pink. x Preset patterns Rainbow, Ocean, Sunset, Forest, Random. 1 Press (HOME), then touch 2 Touch

, and move the scrollbar up

. and down, then touch Key illumination. 3 Move the scrollbar up and down to select the desired preset color, then press it. Customizing the display and button color Custom Color You can register a customized color for the buttons. 1 Press (HOME), then touch 2 Touch

, and move the scrollbar up

. and down, then touch Key illumination. To not customize a preset color, skip to step 5. 3 Move the scrollbar up and down to select Custom Tune, then press it. 4 Move the scrollbar left and right or press +/ to adjust the color range of R (red), G (green), or B (blue). Adjustable color range: 0 63. 5 Press

. The display returns to normal reception/play mode. 29 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 30 Tuesday, January 17, 2012 6:08 PM Draw a vertical line

(downwards) Radio reception:

receive stored stations (go backward). DVD/VCD/Xvid/MPEG-4 playback:

reverse the video. JPEG/audio playback:

skip backward an album

(folder).

(The same as Album .) Pandora playback:

Thumbs down.

(The same as

.) Using Gesture Command You can perform frequently-used operations by drawing the following command stroke on the reception/playback display. Do this Draw a horizontal line

(left to right) Draw a horizontal line

(right to left) Draw a vertical line

(upwards) To Radio reception:

seek forward stations.

(The same as >.) DVD/VCD playback:

skip forward a chapter/track.

(The same as >.) JPEG/Xvid/MPEG-4/audio playback:

skip forward a file/track.

(The same as >.) Pandora playback:

skip a song.

(The same as >.) Radio reception:

seek backward stations.

(The same as ..) DVD/VCD playback:

skip backward a chapter/track.

(The same as ..) JPEG/Xvid/MPEG-4/audio playback:

skip backward a file/track.

(The same as ..) Radio reception:

receive stored stations (go forward). DVD/VCD/Xvid/MPEG-4 playback:

fast-forward the video. JPEG/audio playback:

skip forward an album (folder).

(The same as Album +.) Pandora playback:

Thumbs up.

(The same as

.) 30 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 31 Tuesday, January 17, 2012 6:08 PM Handsfree Calling and Audio Streaming Bluetooth function Before using the Bluetooth function Basic procedure of the Bluetooth function 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called pairing. This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. Note If you delete the device registration from this unit, you need to perform pairing again. 2 Connecting After pairing is made, connect this unit and the Bluetooth device. Depending on the device, connection is automatically made along with the pairing. Bluetooth status indications ATT Calling... Name 0123456789 Calling... Bluetooth status indications None: Bluetooth signal is off. Lit: Bluetooth signal is on. None: No device is connected for audio streaming. Flashing: Connection is in progress. Lit: A device is connected. None: No cellular phone is connected for handsfree calling. Flashing: Connection is in progress. Lit: A cellular phone is connected. Indicates the signal strength status of the connected cellular phone. Indicates the remaining battery status of the connected cellular phone. None: No unread SMS messages Lit: Unread SMS message(s) 3 Handsfree calling/audio streaming You can make/receive a handsfree call, or listen to audio through this unit. Installing the microphone To capture your voice during handsfree calling, you need to install the microphone (supplied). For details on how to connect the microphone, refer to the supplied Installation/Connections guide. 31 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 32 Tuesday, January 17, 2012 6:08 PM Pairing Pairing is required only the first time you connect to a Bluetooth device (cellular phone, etc.).*1 To pair this unit to a Bluetooth device, you need to enter the same passkey*2 on this unit and on the Bluetooth device. The passkey can be either your own selected number or the number determined by the Bluetooth device. For details, refer to the manual of the Bluetooth device.

*1 If you delete the device registration from this unit, you need to perform pairing again.

*2 Passkey may be called passcode, PIN code, PIN number, password, etc., depending on the Bluetooth device. Tip You can pair up to 9 devices. Searching from the Bluetooth device The procedure to search for this unit from the other Bluetooth device is explained below. 1 Press (HOME), then touch 2 Touch

, and move the scrollbar up

. and down. The Bluetooth setting menu appears. 3 Touch Bluetooth Connection, then set the signal to ON. The Bluetooth signal of this unit is activated. 4 Touch Pairing Mode. This unit is ready to be detected by the other Bluetooth device. 5 Start searching for this unit from the other Bluetooth device. After the search is complete, this unit appears as Sony Automotive in the list of the other Bluetooth device. DR-BT30Q Sony Automotive XXXXXXX After you perform the required operation on the other Bluetooth device, the passkey input display appears on this unit. 32 6 Touch the number keys to enter the passkey from the other Bluetooth device. Pairing is complete and this unit is connected to the other Bluetooth device. When connection is made successfully, or appears at the top of the display. Notes

While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, disconnect the current connection.

It may take time to search or connect.

Depending on the device, the connection confirmation display may appear before inputting the passkey.

The time limit for inputting the passkey differs depending on the device.

This unit cannot be connected to a device that supports only HSP (Head Set Profile). Connecting When the ignition is turned to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 38) and the other Bluetooth device. To connect from the other Bluetooth device Operate the other Bluetooth device to connect to this unit. When connection is made successfully, appears at the top of the display. or To connect to the last-connected device from this unit (Bluetooth Audio only) During disconnection, press (HOME), then touch BT Audio. This unit searches for the last-connected Bluetooth device. Note If connection is made during audio streaming, noise may occur over playback sound. Tip You can connect a cellular phone for audio streaming if it supports A2DP (Advanced Audio Distribution Profile). XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 33 Tuesday, January 17, 2012 6:08 PM Handsfree calling Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. Making calls By dialing a phone number 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. Back ATT BT Menu Top Preset Dial P1 P4 P2 P5 P3 P6 Voice Dial BT phone Call Menu PB Access 2 Touch

. The number input display appears. Back ATT Top Dial Please input phone number. 1 6 2 7 3 8 4 9 5 0 3 Touch the number keys to enter the phone number, then touch

. To delete an entered number, touch

. The call is made and the calling display appears until the other party answers. ATT Calling... Name 0123456789 Calling... By the phonebook For details on how to manage the phonebook data, see Phonebook management on page 35. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook appears. 3 Select the desired contact. 1 In the initial list, touch the initial of the contact. 2 In the name list, touch the name of the contact. 3 In the number list, touch the phone number. The contact confirmation display appears. 4 Touch

. The call is made and the calling display appears until the other party answers. Tip You can also browse the phonebook of the connected cellular phone on this unit and make a call (page 36). By the call history The unit stores the last 20 calls, allowing you to select one quickly from the list. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

. The call history list appears. To scroll the list, move the scrollbar up and down. 3 Touch the desired item in the list. The contact confirmation display appears. 4 Touch

. The call is made and the calling display appears until the other party answers. By the preset dial You can store up to 6 contacts in the preset dial. For details on how to store, see Preset dial on page 37. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch the number in the list (1 to 6). The contact confirmation display appears. 3 Touch Yes. The call is made and the calling display appears until the other party answers. 33 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 34 Tuesday, January 17, 2012 6:08 PM By the voice dial function You can make a call using the voice tag stored on the connected cellular phone. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch 3 Say the voice tag stored on the cellular

. phone. Your voice is recognized, then the call is made. The calling display appears until the other party answers. By the redial function 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch 3 Touch the desired item in the list. The contact confirmation display appears. 4 Touch

. The call is made and the calling display appears until the other party answers. Notes

Say the voice tag in the same way as you stored it on the cellular phone.

If the voice dial function is activated on the connected cellular phone, it may not work via this unit.

Do not use the voice dial function on the cellular phone while it is connected to this unit.

Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized.

Voice dial may not work depending on the recognition specification of the cellular phone. For details, visit the support site on the back cover. Receiving calls With the unit connected to the cellular phone, you can receive a call in any status (except for Mirror Link mode). The following display indicates an incoming call, along with the ringtone. ATT Incoming call... Name 0123456789 Incoming call... To answer the call Touch

. To adjust the ringtone volume Press (VOL) +/ while receiving a call. The level of ringtone volume will be stored into memory, independently from the regular volume level. To reject a call Touch Note The ringtone and talkers voice are output only from the front speakers. Tips

You can set to answer a call automatically (page 37).

You can set to use the ringtone of the cellular phone or this unit (page 37). To adjust the talkers voice volume Press (VOL) +/ while making a call. The level of the talkers voice volume will be stored into memory, independently from the regular volume level. 34 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 35 Tuesday, January 17, 2012 6:08 PM Operations during a call The following display appears during a call. ATT BT Menu Top On the Line. Name 0123456789 Handsfree OFF Open Keypad 10:59 To adjust the talkers voice volume Press (VOL) +/ during a call. The level of the talkers voice volume will be stored into memory, independently from the regular volume level. To send DTMF (Dual Tone Multiple Frequency) tones Touch Open Keypad, then the required number keys. To transfer the current call to the cellular phone Touch Handsfree OFF. To transfer back to the handsfree call, touch Handsfree ON. Note Depending on the cellular phone, connection may be cut off when call transfer is attempted. To adjust the volume for the other party 1 Press (HOME), then touch BT Phone. 2 Touch

, then MIC Gain. 3 Touch /+ to adjust the level. The level is adjustable in single steps, between Low, Mid, High. 4 Touch Back repeatedly to return to the previous displays. To end a call Touch

. Phonebook management You can store up to 1000 contacts in the phonebook and up to 3 phone numbers can be registered to each contact. Notes

Prior to disposal or changing ownership of your car with this unit still installed, be sure to press the reset button to erase all the phonebook data in this unit to prevent possible unauthorized access. Disconnecting the power supply lead will also erase all the phonebook data.

Downloaded phonebook data from a cellular phone cannot be overwritten by subsequent data. However, some data (name, etc.), may be duplicated as a result.

Phonebook data may be lost if this unit is damaged.

When disposing of this unit, delete the phonebook data by initializing (page 38). Storing phonebook data To download from a cellular phone If the connected cellular phone supports PBAP

(Phone Book Access Profile), you can download phonebook data and store on this unit. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch 3 Touch Cellular.

, then Phonebook Select. When Phonebook is pressed, the cellular phone data will be loaded. To receive from a cellular phone You can send phonebook data from the connected cellular phone and receive it on this unit. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

, then Receive Phonebook. This unit is ready for receiving phonebook data. 3 Send the phonebook data by operating the connected cellular phone. When receiving is complete, Complete appears and the phonebook data is stored on this unit. 35 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 36 Tuesday, January 17, 2012 6:08 PM Browsing a phonebook in a cellular phone If the connected cellular phone supports PBAP

(Phone Book Access Profile), you can browse its phonebook data on this unit. You can also make a call to a contact or add the contact to this units phonebook. 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook access menu appears. 3 Touch Option to select the memory where phonebook data is stored. To browse the data in a cellular phones internal memory, set to Memory. To browse the data on the SIM card, set to SIM. 4 Touch Phonebook Select. The phonebook of the connected cellular phone appears. 5 Select the desired contact. 1In the initial list, touch the initial of the contact. 2In the name list, touch the name of the contact. 3In the number list, touch the phone number. The contact confirmation display appears. To call the contact Select the desired contact from the phonebook, then touch

. Deleting phonebook data To delete all phonebook data on this unit 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch 3 Touch

. The phonebook appears. The confirmation display appears. 4 Touch Yes. All phonebook data is deleted. To delete an individual contact from the phonebook 1 Follow steps 1 to 2 above. 2 Select the contact to delete. 1 In the initial list, touch the initial of the contact. 2 In the name list, touch the name of the contact. 3 Touch The confirmation display appears. 4 Touch Yes. The contact is deleted from the phonebook. 36 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 37 Tuesday, January 17, 2012 6:08 PM Call data management Bluetooth phone settings Call history You can delete the items in the call history. To delete all items in the call history 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

. The call history list appears. 3 Touch

. The confirmation display appears. 4 Touch Yes. All items in the call history are deleted. Preset dial You can store contacts in the phonebook or call history into the preset dials. To store from the phonebook 1 Press (HOME), then touch BT Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook appears. 3 Select the contact to store in the preset dial. 1 In the initial list, touch the initial of the contact. 2 In the name list, touch the name of the contact. 3 In the number list, touch the phone number. The contact confirmation display appears. 4 Touch Preset Memory, then the desired preset number (1 to 6). The contact is stored to the selected preset number. To change the registration of the preset dial Follow the procedure above and overwrite a registered preset dial. The Bluetooth phone settings can be configured in BT Phone. 1 Press (HOME), then touch BT phone. 2 Touch

. The Bluetooth phone setting menu appears. 3 Touch the desired item in the list and configure the setting. The items in the Bluetooth phone setting menu are as follows:

Ringtone*1*2 Uses the ringtone of this unit or the connected cellular phone: Default, Cellular. Auto Answer*1 Answers an incoming call automatically. 3sec: to answer automatically after 3 10sec: to answer automatically after 10 seconds. seconds. OFF: to not answer automatically. Phonebook Select Browses the phonebook data on this unit or cellular phone: Internal, Cellular. Receive Phonebook Sends phonebook data from the connected cellular phone. Speech Quality (Echo Canceller/Noise Canceller Mode) Reduces echo and noise during a call. For normal use, set to Mode 1. If the outgoing sound quality is unsatisfactory, set to Mode 2 or OFF. MIC Gain (page 35) Adjusts the microphone volume for the other party: Low, Mid, High.

*1 Cannot be configured during a handsfree call.

*2 Depending on the cellular phone, this units ringtone may be output even if set to Cellular. 37 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 38 Tuesday, January 17, 2012 6:08 PM Audio streaming Listening to a Bluetooth device via this unit If the other device supports A2DP (Advanced Audio Distribution Profile), you can listen to the playback sound via this unit. 1 Connect this unit and the Bluetooth device (page 32). 2 Reduce the volume on this unit. 3 Press (HOME), then touch BT Audio. The Bluetooth Audio display appears. 4 Operate the other Bluetooth device to start playback. 5 Adjust the volume on this unit. Operating a Bluetooth device with this unit If the other device supports AVRCP (Audio Video Remote Control Profile), you can control playback via this unit. Operations can be performed in the same way as disc playback (page 18), except for the following:

Do this Touch To reduce the volume level differences between this unit and the other Bluetooth device. The level is adjustable in single steps, between 8 and +18. General Settings about Bluetooth The Bluetooth settings can be configured in BT Menu. 1 Press (HOME), then touch 2 Touch

, and move the scrollbar up

. and down. The Bluetooth setting menu appears. 3 Touch the desired item in the list and configure the setting. The items in the Bluetooth setting menu are as follows:

Bluetooth Connection*

Activates the Bluetooth signal: ON, OFF. Set ON to enter the Paring mode. Bluetooth Initialize*

Initializes all Bluetooth-related settings. Touch Yes to confirm. Bluetooth Initialize deletes all Bluetooth-

related settings such as phonebook data, call history, preset dial, history of connected Bluetooth devices, etc.

* Cannot be configured during a handsfree call. Note For details on the setting of other Bluetooth devices, refer to their respective manuals. Notes

The available operation differs depending on the Bluetooth device. Perform unavailable operations on the Bluetooth device.

Depending on the Bluetooth device, it may be necessary to touch u twice to start/pause the playback.

During audio streaming, some indications such as track name, etc., may not appear on this unit. 38 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 39 Tuesday, January 17, 2012 6:08 PM Pandora internet radio Pandora internet radio is available to stream music through your Android and BlackBerry phones. You can control Pandora on Bluetooth connected Android and BlackBerry phone from this unit. Download the latest version of the Pandora application and obtain more information from www.pandora.com For details on usable devices, visit the support site on the back cover. Notes

Certain Pandora service functions may not be

You can control Pandora via the Bluetooth function on Android and BlackBerry phones only.

Pandoras service is currently only available in the available. U.S. Tip You can also operate a Pandora application on the iPod connected USB. Playing back Pandora Before connecting the mobile device or iPhone, turn down the volume of the unit. To connect the mobile device via the Bluetooth function 1 Connect this unit and the mobile device via the Bluetooth function

(page 32). 2 Launch the Pandora application on the mobile device. 3 Press (HOME), then touch Pandora. 4 Touch

, then Bluetooth for Android or Blackberry*. Playback starts.

* When the mobile device is connected, the device number may appear. Make sure that the same numbers are displayed (e.g., 123456) in this unit and the mobile device, then touch Yes on this unit and select Yes on the mobile device. To connect the iPhone 1 Launch the Pandora application on the iPhone. 2 Connect this unit and iPhone. 3 Press (HOME), then touch Pandora. 4 Touch

, then USB for iPhone. Playback starts. To pause playback, touch u. To resume playback, touch again. To skip a song, touch >. Notes

You cannot skip back to the previous song.

Pandora limits the number of skips allowed. Adjusting the volume level During playback, touch Volume Level Adjust.

, then touch +/ in the Thumbs feedback Thumbs Up or Thumbs Down feedback allows you to personalize stations to suit your preference. Thumbs Up During playback, touch Thumbs Down During playback, touch

. Station list The station list allows you to easily select a desired station. 1 During playback, touch

. The station list appears. 2 Touch the desired station name. Playback starts. To change the sorting order, touch Panel Open, then Date or A-Z. To scroll the list line by line, touch v/V. To scroll the list continuously, touch and hold v/V. QuickMix QuickMix allows you to listen to songs played on one or more Pandora stations in your station list randomly. Edit your QuickMix station selections on the device before connection. 39 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 40 Tuesday, January 17, 2012 6:08 PM Bookmarking The song or artist currently being played can be bookmarked and stored in your Pandora account. 1 During playback, touch

, then or

. Creating a Station A new station can be created based on the song or artist being played. It will be accessible from your Pandora account immediately. 1 During playback, touch

, then or

. Note Pandora limits the number of stations per account. Deleting a Station Stations can be deleted from the station list in order to make room for new stations. 1 During playback, touch

. The station list appears. 2 In the station list, touch

. The delete mode will be activated and checkboxes will be shown next to station names. 3 Check the stations to be deleted and press Delete. A confirmation box will show OK to confirm deletion. 4 Touch OK. 40 Sound Adjustment Selecting the sound quality EQ7 You can select an equalizer curve from 7 music types (Xplod, Vocal, Edge, Cruise, Space, Gravity, Custom, or OFF). 1 During reception/playback, press

(HOME), then touch

. 2 Touch

. The sound setting menu appears. 3 Touch EQ7. The options appear. 4 Touch the desired equalizer curve. The setting is complete. To cancel the equalizer curve, select OFF. To return to the previous display, touch

. Note When you operate the sound adjustment during USB Video playback, the playback is stopped and no sound is output. Customizing the equalizer curve EQ7 Tune The EQ7 Custom curve allows you to make your own equalizer settings. You can adjust the level of 7 different bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz. 1 During reception/playback, press

(HOME), then touch

. 2 Touch 3 Touch Tune.

, then EQ7. The tuning display appears. Back ATT EQ7 Tune : Custom Top 0 62 Hz 0 157 Hz 0 396 Hz Reset 0 1 kHz 0 2.5 kHz 0 6.3 kHz 0 16 kHz OK 4 Touch +/ of each frequency to adjust their levels. The level is adjustable in single steps, between 8 and +8. To restore the factory-set equalizer curve, touch Reset. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 41 Tuesday, January 17, 2012 6:08 PM 5 Touch OK. The setting is complete. To return to the previous display, touch Tip Other equalizer types are also adjustable. Adjusting the sound characteristics The sound balance between left and right speakers (Balance) and front and rear speakers

(Fader) can be adjusted to your preference. You can also adjust the volume level of the subwoofer if it is connected. 1 During reception/playback, press

(HOME), then touch

. 2 Touch

. The sound setting menu appears. 3 Touch Balance/Fader/Subwoofer. The setting display appears. Back ATT Top Balance/Fader/Subwoofer Level Adjust 0 Subwoofer Fader : 0 Balance : 0 4 Touch B/V/v/b to adjust the balance/

fader. The level is adjustable in single steps between 15 and +15 (Balance)/15 and +15 (Fader). 5 Touch +/ to adjust the volume level of the subwoofer. This setting is adjustable only when a subwoofer is connected and Subwoofer is set to ON (page 49). The level is adjustable in single steps, between 6 and +6. To return to the previous display, touch

. Optimizing sound for the listening position Intelligent Time Alignment The unit can change the localization of sound by delaying the sound output from each speaker to suit your position, and simulate a natural sound field with the feeling of being in the center of it wherever you sit in the car. The options for Listening Position are indicated below. Front L (1): Front left Front R (2): Front right Front (3): Center front All (4): In the center of your car Custom Tune: Precisely calibrated position (page 42) OFF: No position set 1 2 3 4 You can also set the approximate subwoofer position from your listening position if:

the subwoofer is connected and Subwoofer is set to ON (page 49). the listening position is set to Front L, Front R, Front, or All. 1 During reception/playback, press

(HOME) then touch

. 2 Touch

. The sound setting menu appears. 3 Touch Listening Position. The setting display appears. 4 Move the scrollbar up and down, then touch Listening Position. Touch Front L, Front R, Front, All, or Custom Tune. 5 Set the subwoofer position. If you select Front L, Front R, Front, or All in step 4 above, you can set the subwoofer position. Touch Near, Normal, or Far. The setting is complete. To cancel Intelligent Time Alignment, select OFF. To return to the previous display, touch

. 41 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 42 Tuesday, January 17, 2012 6:08 PM Calibrating the listening position Intelligent Time Alignment Tune You can precisely calibrate your listening position from each speaker so that the sound delay reaches the listener more correctly. Before starting, measure the distance between your listening position and each speaker. 1 During reception/playback, press

(HOME) then touch

.

, then Listening Position. 2 Touch 3 Touch Custom Tune. The setting display appears. Back ATT Position Tune Top 100 100 100 100 100

(cm) Reset OK 4 Touch +/ of each speaker to set the distance between your listening position and the speakers. The distance is adjustable in 2 cm (13/16 in) steps, between 0 and 400 cm (0 and 13 1/10 ft). To restore the default setting, touch Reset. 5 Touch OK. The setting is complete. To return to the previous display, touch Note The setting is applied only after OK is touched. Speaker configuration and volume setup Creating a virtual center speaker CSO To fully enjoy surround sound, it is preferable to have 5 speakers (front left/right, rear left/right, center) and 1 subwoofer. CSO (Center Speaker Organizer) allows you to create a virtual center speaker even though a real center speaker is not connected. 1 During DVD playback, touch the display. 2 Touch

. The Disc Option menu appears. 3 Touch Center Speaker Organizer. The options appear. 4 Touch CSO1, CSO2, or CSO3. The setting is complete. To return to the previous display, touch Note CSO is effective only when Multi Ch Output is set to Multi (page 51), as it is effective only for playback of multi-channel sources. Using rear speakers like subwoofers Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying the low pass filter setting (page 48) to the rear speakers. This function allows the rear speakers to work like a pair of subwoofers if one is not connected. 1 During reception/playback, press

(HOME), then touch

. 2 Touch

. The sound setting menu appears. 42 3 Move the scrollbar up and down, then touch Rear Bass Enhancer. The options appear. 4 Touch RBE1, RBE2, or RBE3. The setting is complete. To return to the previous display, touch

. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 43 Tuesday, January 17, 2012 6:08 PM Adjusting the speaker volume You can adjust the volume level of each connected speaker. The adjustable speakers are Front R (Front Right), Front L (Front Left), Surround L

(Rear Left), Surround R (Rear Right) and Subwoofer*.

* Adjustable only when a subwoofer is connected and Subwoofer is set to ON (page 49). 1 While no source is selected, press

(HOME), then touch

. 2 Touch

. The sound setting menu appears. 3 Move the scrollbar up and down, then touch 4.1ch Speaker Level. The setting display appears. Monitor Adjustment Touch panel calibration Touch panel calibration is required if the touching position does not correspond with the proper item. 1 Press (HOME), then touch 2 Touch

. The general setting menu appears. 3 Move the scrollbar up and down, then touch Touch Panel Adjust. The setting display appears. 4 Touch the targets in sequence. The calibration is complete. To cancel calibration, touch Cancel. Back ATT 4.1ch Speaker Level Front L Front R Surround L Surround R Subwoofer Reset 0 Top Adjusting the picture Picture EQ 4 Touch the speaker, then +/ to adjust the level. Repeat this step to adjust each speakers volume. To restore the default setting, touch Reset. To return to the previous display, touch

. You can adjust the picture to suit the interior brightness of the car. The options are indicated below. Dynamic: Vivid picture with bright, clear colors. Standard: Standard picture. Theater: Brightens the monitor; suitable for darkly-lit movies. Sepia: Applies a sepia tone to the picture. Custom 1, Custom 2: User-adjustable settings (page 44). 1 During video/image playback, press

(HOME), then touch

. 2 Touch

. The Visual Settings menu appears. 3 Touch Picture EQ. The options appear. 4 Touch the desired option. To return to the previous display, touch Notes

This setting is available only when the parking brake

. is set.

This setting is not available for USB Video. 43 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 44 Tuesday, January 17, 2012 6:08 PM Customizing the picture The options Custom 1 and Custom 2 of Picture EQ allow you to make your own picture setting by adjusting the picture tones. 1 During video/image playback, press

(HOME), then touch

. 2 Touch 3 Touch Custom 1 or Custom 2, then

, then Picture EQ. Custom Tune. The setting display appears. Back ATT Picture EQ : Custom Tune Top Warm Normal Cool Color Tone Brightness 0 Color 0 4 Touch Warm, Normal, or Cool to select Color Tone. 5 Touch +/ of Brightness and Color to adjust their levels. To return to the previous display, touch Note The picture of the rear view camera cannot be adjusted. Selecting the aspect ratio You can change the screen aspect ratio. The options are indicated below. Normal: Picture with 4:3 aspect ratio (regular picture). Wide: Picture with 4:3 aspect ratio enlarged to the left and right edges of the screen, with overflowing parts of the top and bottom cut off to fill the screen. Full: Picture with 16:9 aspect ratio. Zoom: Picture with 4:3 aspect ratio enlarged to the left and right edges of the screen. 1 During video/image playback, press

(HOME), then touch

. 2 Touch

. The screen setting menu appears. 3 Touch Aspect. The options appear. 4 Touch the desired option. To return to the previous display, touch Notes

This setting is available only when the parking brake

. is set.

The screen aspect ratio of the rear view camera cannot be changed.

When you change the screen aspect of USB Video, enter the option menu of USB Video. (page 23) 44 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 45 Tuesday, January 17, 2012 6:08 PM Settings The setting menu includes the following categories.

: General Settings (page 46)

: Sound Settings (page 48)

: Visual Settings (page 50)

: Source Settings (page 51) Basic setting operation You can set items in the menu via the following procedure. For example, when setting the demonstration:

1 Press (HOME), then touch

. The setting menu appears. Back ATT Security Control Locked Clock Adjust Auto OFF CT No OFF / ON Top 1/4 Output Color System NTSC / PAL General Sound Screen Visual 2 Touch

. The general setting display appears. Back ATT Screen Select Picture EQ Aspect Clock Demo Dynamic Full OFF / ON OFF / ON Top 1/1 General Sound Screen Visual 3 Touch Demo to set to OFF. The setting is complete. To scroll the options (only when required), move the scrollbar up and down. To return to the previous display, touch

. 45 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 46 Tuesday, January 17, 2012 6:08 PM General Settings c c the desired item c the desired option. For details on this procedure, see Basic Touch setting operation on page 45. For details, see the pages listed below. z indicates the default setting. Item Option Purpose Unit status Navigation Source Playback Control To change the Navigation mode. L-Audio/

R-Nav, R-Audio/

L-Nav (z), Navigation Only Clock Adjust (page 14, 16) Language Name Characters Auto OFF Shuts off automatically after a desired time when no source is selected. Demo Beep English (z), Franais, Espaol, Portugus,

, Nederlands, Deutsch, Italiano Latin Characters

(z), Russian Characters, Simplified Chinese, Traditional Chinese, Korean Characters, Thai Characters No (z) 30sec, 30min, 60min ON (z) OFF ON (z) OFF Rotary Commander Changes the operative direction of rotary commander controls. Default (z) Reverse 46 To select the display language. To select the character encoding. To deactivate the Auto Off function. To select the desired time. To activate the demonstration. To deactivate the demonstration. To activate the operation sound. To deactivate the operation sound. To use in the factory-set position. To use on the right side of the steering column. Any status Any status Any status Any status Any status Any status Any status Any status XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 47 Tuesday, January 17, 2012 6:08 PM Item Option Purpose Key Illumination (page 29) Light Blue (z) To change the color of the buttons. Touch Panel Adjust

(page 43) Camera Input Activates the video input from the connected rear view camera. OFF Normal (z) Reverse To deactivate the input. To display the picture from the rear view camera when the back lamp lights up. To display the picture from the rear view camera when the shift lever is set to the R

(reverse) position. Rear View Camera Setting

(page 54) NTSC (z) To set to NTSC. Output Color System Changes the color system according to the connected monitor.

(SECAM is not supported.) Bluetooth Connection

(page 32) PAL ON OFF (z) Bluetooth Initialize*

Firmware Version To set to PAL. To search from the Bluetooth device. To not connect the Bluetooth device. To initialize the Bluetooth settings. To update the Firmware version. Unit status Any status Any status Any status Any status No source selected Any status Any status Any status

* Bluetooth Initialize deletes all Bluetooth-related settings such as phonebook data, call history, preset dial, history of connected Bluetooth devices, etc. 47 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 48 Tuesday, January 17, 2012 6:08 PM Sound Settings c c the desired item c the desired option. For details on this procedure, see Basic setting Touch operation on page 45. For details, see the pages listed below. z indicates the default setting. Item EQ7 (page 40) Option OFF (z) Purpose Unit status To cancel the equalizer curve. Xplod, Vocal, Edge, Cruise, Space, Gravity, Custom To select the equalizer curve; customize the equalizer curve. During reception/

playback Balance/Fader/Subwoofer

(page 41) Listening Position (page 41) Sets the listening position and subwoofer position. Balance:

(15 ~ +15) Fader:

(15 ~ +15) z: 0 Subwoofer:

(6 ~ +6) z: 0 OFF To adjust the level. To adjust the volume level of the subwoofer.

(Available only when Subwoofer is set to ON.) To not set the listening position. Front L (z) To set to front left. Front R To set to front right. During reception/

playback To set to center front. To set to the center of your car. To precisely calibrate the listening position

(page 42). To select the subwoofer position. (Available only when Subwoofer is set to ON, and the listening position is set to Front L, Front R, Front, or All.) To select the mode. Any status During reception/

playback Front All Custom Subwoofer:

Near, Normal (z), Far Rear Bass Enhancer

(page 42) Uses rear speakers like subwoofers. OFF (z), RBE1, RBE2, RBE3 48 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 49 Tuesday, January 17, 2012 6:08 PM Item Option Purpose Unit status Crossover Filter Selects the cut-off frequency of the front/rear speakers

(HPF) and subwoofer (LPF). Subwoofer Sets the subwoofer connection status. 4.1ch Speaker Level

(page 43) LPF: 50 Hz, 60 Hz, 80 Hz, 100 Hz (z), 120 Hz HPF: OFF (z) To select the cut-off frequency. (Available only when Subwoofer is set to ON.) To not cut out the frequencies. HPF: 50 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz To select the cut-off frequency. Subwoofer Phase:

Normal (z), Reverse ON (z) OFF To select the subwoofer phase. (Available only when Subwoofer is set to ON.) To set the connection status to on. To set the connection status to off. During reception/

playback No source selected No source selected 49 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 50 Tuesday, January 17, 2012 6:08 PM Visual Settings c c the desired item c the desired option. For details on this procedure, see Basic Touch setting operation on page 45. For details, see the pages listed below. z indicates the default setting. Item Dimmer Changes the display brightness. Option Auto (z) ON OFF Dimmer Level Sets the brightness level when the dimmer is activated.

(5 ~ +5) z: 0 Purpose Unit status To dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) To dim the display. To deactivate the dimmer. To select the level. Any status Any status During video/

image playback Picture EQ*1 (page 43) Dynamic (z), Standard, Theater, Sepia To select the picture quality. Custom 1, Custom 2 To customize the picture quality. Aspect*1*2 (page 44) Full (z), Normal, Wide, Zoom To select the screen aspect ratio. During video/

image playback

*1 This setting is available only when the parking brake is set.

*2 When you change the screen aspect of USB Video, enter the option menu of USB Video (page 23). 50 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 51 Tuesday, January 17, 2012 6:08 PM Source Settings c c the desired item c the desired option. For details on this procedure, see Basic Touch setting operation on page 45. For details, see the pages listed below. z indicates the default setting. Item Option Purpose Unit status DVD Direct Search

(page 22) Sets the search item for DVD direct search play. DVD Menu Language DVD Audio Language DVD Subtitle Language Audio DRC Makes the sound clear when the volume is low. Only for a DVD* conforming to Audio DRC (Dynamic Range Control).

* Excluding DVD-R/DVD-R DL/

DVD-RW in VR mode. Multi Channel Output Switches the method of outputting multi channel sources. Monitor Type Selects an aspect ratio suitable for the connected monitor.

(The screen aspect ratio of this unit also changes.) Depending on the disc, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan, and vice versa. Chapter (z) To search for a chapter. Title To search for a title. To change the discs menu language. To change the soundtrack language. To change the subtitle language recorded on the disc. Any status No source selected No source selected No source selected Standard (z) To select the standard setting. Wide To obtain the feeling of being at a live performance. No source selected Multi (z) Stereo 16:9 (z) To output in 4.1 channels. To downmix to 2 channels. No source selected To display a wide picture. Suitable when connecting to a wide-screen monitor or a monitor with a wide mode function. 4:3 Letter Box To display a wide picture with bands on the upper and lower positions of the screen. Suitable when connecting to a 4:3 screen monitor. 4:3 Pan Scan To display a wide picture on the entire screen and automatically cut off the portions that do not fit. No source selected 51 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 52 Tuesday, January 17, 2012 6:08 PM Item Option Purpose DVD Playlist Play

(For DVD-R/DVD-R DL/

DVD-RW in VR mode only) Video CD PBC (page 20) Original (z) Playlist ON (z) OFF Multi Disc Resume ON (z) OFF SXM Parental Control

(page 54) Locked To play titles as they were originally recorded. To play an edited playlist. To play a VCD with PBC functions. To play a VCD without PBC functions. To store the resume settings in memory for up to 5 video* discs.

* DVD VIDEO/VCD/Xvid/

MPEG-4 only. To not store the resume settings in memory. Resume playback is available only for the current disc in the unit. To activate the parental lock. Unlocked (z) To deactivate the parental lock. Unit status No source selected No source selected No source selected No source selected Source Skip To skip Source select. Any status Note If parental control is applied, resume playback will not work. In this case, playback starts from the beginning of the disc when it is inserted. 52 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 53 Tuesday, January 17, 2012 6:08 PM Setting the type of device By setting the type (video or audio) of each connected device, the background screen can be switched accordingly. 1 Press (HOME), then touch AUX. 2 Touch to open the menu, then touch AUX 1 Input or AUX 2 Input. 3 Touch Audio or Video. The setting is complete. To return to the previous display, touch

. Using Optional Equipment Auxiliary audio/video equipment You can connect up to 2 optional devices, such as a portable media player, game console, etc., to the AUX1 IN and AUX2 IN terminals on the unit. Selecting an auxiliary device 1 Press (HOME), then touch AUX. The AUX playback display appears. Source List ATT Top AUX1 AUX2 Level 0 2 Touch AUX1 or AUX2 to select the device. Operate via the portable device itself. Adjusting the volume level Be sure to adjust the volume for each connected device before playback. The volume level is common to AUX1 and AUX2. 1 Reduce the volume on the unit. 2 Press (HOME), then touch AUX. The AUX playback display appears. 3 Touch to open the menu, then touch Adjust Input Level. 4 Set your usual listening volume on the unit. 5 Touch /+ repeatedly to adjust the level. The level is adjustable in single steps, between 8 and +18. 53 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 54 Tuesday, January 17, 2012 6:08 PM SiriusXM Connect Tuner Rear view camera By connecting an optional SiriusXM Connect Tuner, you can use the features and functions of the SiriusXM satellite radio (SiriusXM subscriptions sold separately). For more details on services, visit the following web site:

http://www.siriusxm.com/

1 Press (HOME), then touch SXM. Selecting Channel List or Category List 1 Press

. The Channel List appears on the display. 2 Move the scrollbar up and down to select the desired channel. 3 Press

. The Category List appears on the display. 4 Move the scrollbar up and down to select the desired category. Storing channels 1 Touch mode. to enter the Preset Edit 2 Select the number that you want to store. Parental control Some SiriusXM channels contain content that is not suitable for children. You can enable a parental control passkey for these channels. 1 On the Source Settings (page 51), move the scrollbar up and down to select SXM Parental Control. 2 Enter the passkey, then touch OK. To unblock the channels, enter the passkey. The initial passkey is 0000. Displaying the SiriusXM Radio ID 1 During playback, touch 2 Enter 000, then select channel 0. 54 By connecting the optional rear view camera to the CAMERA terminal, you can display the picture from the rear view camera. The picture from the rear view camera appears when:

the back lamp lights up (or the shift lever is set to the R (reverse) position). you press (HOME) then touch Rear View Camera.*

you press (DSPL) repeatedly.*

* The marker lines you edit in Rear view camera settings do not appear. Notes

When backing up your car, watch the surroundings carefully for safety. Do not depend on the rear view camera exclusively.

The picture from a rear view camera does not appear in the rear monitor. Tip Even if a rear view camera is connected, you can set the unit to not display the picture from a rear view camera by deactivating the camera input (page 47). Rear view camera settings You can display setting items on the picture from the rear view camera to assist operation. This setting is available only when:

Camera Input is set to Normal or Reverse (page 47). the parking brake is applied. 1 Press (HOME), then touch 2 Touch 3 Move the scrollbar up and down, then

. touch Rear View Camera Setting. The setting items appear. Back Marker Mirror 1 2 3 Turn off engine but keep the key in the IGN position. Line Edit Displaying marker lines Touch Marker. Touch Marker again to hide the marker lines. XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 55 Tuesday, January 17, 2012 6:08 PM Editing lines 1 Touch Line Edit. Back 1 Edit 2 Edit 3 Edit 1 2 3 Additional Information Precautions

Cool off the unit beforehand if your car has been parked in direct sunlight.

Do not leave the front panel or audio devices brought in inside the car, or it may cause malfunction due to high temperature in direct sunlight.

Power antenna (aerial) extends automatically. Turn off engine but keep the key in the IGN position. Reset 2 Select the line to edit. Touch 1 Edit, 2 Edit, or 3 Edit corresponding to the line to edit. 3 Edit the line. To increase the length, touch B b. To reduce the length, touch bB. To adjust the position, touch V or v. To restore the default setting, touch Reset. To return to the previous display, touch

. Moisture condensation Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly. To maintain high sound quality Do not splash liquid onto the unit or discs. Notes on LCD panel

Do not wet the LCD panel or expose it to liquids. This may cause a malfunction.

Do not press on the LCD panel as doing so can distort the picture or cause a malfunction (i.e., the picture may become unclear, or the LCD panel may be damaged).

Do not touch other than with the finger, as it may damage or break the LCD panel.

Clean the LCD panel with a dry soft cloth. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray.

Do not use this unit outside the temperature range 5 45 C (41 113 F).

If your car was parked in a cold or hot place, the picture may not be clear. However, the monitor is not damaged, and the picture will become clear after the temperature in your car becomes normal.

Some stationary blue, red or green dots may appear on the monitor. These are called bright spots, and can happen with any LCD. The LCD panel is precision-manufactured with more than 99.99% of its segments functional. However, it is possible that a small percentage (typically 0.01%) of the segments may not light up properly. This will not, however, interfere with your viewing. 55 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 56 Tuesday, January 17, 2012 6:08 PM Notes on discs

Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.

Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners.

This unit is designed to play discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit.

Discs that this unit CANNOT play Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc. Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit. 8 cm (3 1/4 in) discs. Note on playback operations of DVDs and VCDs Some playback operations of DVDs and VCDs may be intentionally set by software producers. Since this unit plays DVDs and VCDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VCDs. Notes on DATA CDs and DATA DVDs

Some DATA CDs/DATA DVDs (depending on the equipment used for its recording, or the disc condition) may not play on this unit.

Finalization is required for some discs (page 56).

The unit is compatible with the following standards. For DATA CDs ISO 9660 level 1/level 2 format, Joliet/Romeo in the expansion format Multi Session For DATA DVDs UDF Bridge format (combined UDF and ISO 9660) Multi Border folders).

The maximum number of:

folders (albums): 256 (including root and empty files (tracks/images/videos) and folders contained in a disc: 2,000 (if a folder/file names contain many characters, this number may become less than 2,000). displayable characters for a folder/file name: 64

(Joliet/Romeo). 56 Notes on finalizing discs The following discs are required to be finalized to play on this unit.

DVD-R/DVD-R DL (in video mode/VR mode)

DVD-RW in video mode

DVD+R/DVD+R DL

CD-R

CD-RW The following discs can be played without finalization.

DVD+RW automatically finalized.

DVD-RW in VR mode finalization not required. For details, refer to the manual supplied with the disc. Notes on Multi Session CDs/Multi Border DVDs This unit can play Multi Session CDs/Multi Border DVDs under the following conditions. Note that the session must be closed and the disc must be finalized.

When CD-DA (Compact Disc Digital Audio) is recorded in the first session:

The unit recognizes the disc as CD-DA and only CD-DA of the first session is played, even if another format (e.g., MP3) is recorded in other sessions.

When CD-DA is recorded other than in the first session:

The unit recognizes the disc as a DATA CD or DATA DVD, and all CD-DA sessions are skipped.

When an MP3/WMA/AAC/JPEG/Xvid/MPEG-4 is recorded:

Only the sessions containing the selected file type

(audio/video/image)* are played (if CD-DA or other data exists in other sessions, they are skipped).

* For details on how to select the file type, see page 28. Playback order of MP3/WMA/AAC/

JPEG/Xvid/MPEG-4 files MP3/WMA/AAC/

JPEG/Xvid/

MPEG-4 Folder

(album) MP3/WMA/AAC/

JPEG/Xvid/

MPEG-4 file

(track/image/

video) XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 57 Tuesday, January 17, 2012 6:08 PM About WMA files WMA*1 files meeting the following requirements can be played. Playback is not be guaranteed for all WMA files meeting the requirements. Codec for Disc

Media File format: ASF file format

File extension: .wma

Bit rate: 64 to 192 kbps (Supports variable bit rate

(VBR))

Sampling frequency *2: 44.1 kHz Codec for MSC

Media File format: ASF file format

File extension: .wma

Bit rate: 64 to 192 kbps (Supports variable bit rate

(VBR)) *4

Sampling frequency *2: 44.1 kHz About MP3 files MP3 files meeting the following requirements can be played. Playback is not be guaranteed for all MP3 files meeting the requirements. Codec for Disc

Media File format: MP3 (MPEG-1 Layer3) file

File extension: .mp3

Bit rate: 48 to 192 kbps (Supports variable bit rate

Sampling frequency *2: 32, 44.1, 48 kHz Codec for MSC

Media File format: MP3 (MPEG-1 Layer3) file

File extension: .mp3

Bit rate: 32 to 320 kbps (Supports variable bit rate format

(VBR)) format

(VBR)) *4

Sampling frequency *2: 32, 44.1, 48 kHz About AAC files AAC*3 files meeting the following requirements can be played. Playback is not be guaranteed for all AAC files meeting the requirements. Codec for Disc

Media File format: MP4 file format

File extension: .mp4, .m4a,

Bit rate: 40 to 320 kbps (Supports variable bit rate

(VBR))

Sampling frequency *2: 44.1, 48 kHz Codec for MSC

Media File format: MP4 file format

File extension: .mp4, .m4a, .3gp

Bit rate: 48 to 288 kbps (Supports variable bit rate

(VBR)) *4

Sampling frequency *2: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz About Linear PCM files Linear PCM files meeting the following requirements can be played. Playback is not be guaranteed for all Linear PCM files meeting the requirements. Codec for MSC

Media File format: Wave-Riff file format

File extension: .wav

Bit rate: 1,411 kbps

Sampling frequency *2: 44.1 kHz About HE-AAC files HE-AAC files meeting the following requirements can be played. Playback is not be guaranteed for all HE-AAC files meeting the requirements. Codec for MSC

Media File format: MP4 file format

File extension: .mp4, .m4a, .3gp

Bit rate: 32 to 144 kbps *4

Sampling frequency *2: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz About AVC (H.264/AVC) files AVC (H.264/AVC) files meeting the following requirements can be played. Playback is not be guaranteed for all AVC (H.264/AVC) files meeting the requirements. Codec for MSC

Media File format: MP4 file format,

File extension: .mp4, .m4v

Profile: Baseline Profile/Main Profile

Level: 4

Bit rate: Max. 20 Mbps

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 1,920 x 1,080 *5 About MPEG-4 files MPEG-4 files meeting the following requirements can be played. Playback is not be guaranteed for all MPEG-4 files meeting the requirements. Codec for Disc

Media File format: MP4 file format,

File extension: .mp4

Profile: Simple Profile

Bit rate: Max. 10Mbps on DVD, 7Mbps on CD

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 720 x 576 pixel

Media File format: Xvid file format

File extension: .avi, .xvid

Profile: Advanced Simple Profile

Bit rate: Max. 10Mbps on DVD, 7Mbps on CD

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 720 x 576 *5 Codec for MSC

Media File format: MP4 file format 57 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 58 Tuesday, January 17, 2012 6:08 PM

File extension: .mp4, .m4v

Profile: Simple Profile

Bit rate: Max. 20 Mbps

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 1,280 x 720 *5

Media File format: MP4 file format

File extension: .mp4, .m4v

Profile: Advanced Simple Profile

Bit rate: Max. 10 Mbps (TBD)

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 720 x 576 *5

Media File format: Xvid file format

File extension: .avi, .xvid

Profile: Advanced Simple Profile

Bit rate: Max. 8 Mbps

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 720 x 576 *5 About Windows Media files Windows Media files meeting the following requirements can be played. Playback is not be guaranteed for all Windows Media files meeting the requirements. Video 9 *1*6

Media File format: ASF file format

File extension: .wmv

Bit rate: Max. 20 Mbps (TBD)

Frame rate: Max. 30 fps (30p/60i)

Resolution: Max. 1,920 x 1,080 *5 About JPEG files JPEG*7 files meeting the following requirements can be played. Playback is not be guaranteed for all JPEG files meeting the requirements. Codec for MSC

Media File format: Compatible with DCF 2.0/Exif 2.21 file format

File extension: .jpg, jpeg

Profile: Baseline Profile

Number of pixels: Max. 6,048 x 4,032 pixels

(24,000,000 pixels)

*1 Copyright protected WMA/WMV files cannot be

*2 Sampling frequency may not correspond to all

*3 Copyright protected AAC-LC files cannot be played

*4 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency.

*5 These numbers indicate the maximum resolution of playable video, and do not indicate the players display resolution. The display resolution is 800 x 480.

*6 Some WMV files can be played back only by transferring using Windows Media Player.

*7 Some photo files cannot be played back, depending on their file formats. played back. encoders. back. About iPod

You can connect to the following iPod models. Update your iPod devices to the latest software before use. Made for iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod touch (1st generation) iPod classic iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation)*

iPhone 4 iPhone 4S iPhone 3GS iPhone 3G iPhone

* Passenger App Control is not available for iPod nano

(1st generation).

Made for iPod, and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. About Bluetooth function What is Bluetooth technology?

Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. Bluetooth wireless technology operates within a range of about 10 m

(about 33 feet). Connecting two devices is common, but some devices can be connected to multiple devices at the same time.

You do not need to use a cable for connection since Bluetooth technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.

Bluetooth technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide. 58 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 59 Tuesday, January 17, 2012 6:08 PM On Bluetooth communication

Bluetooth wireless technology operates within a range of about 10 m. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment.

The following conditions may affect the sensitivity of Bluetooth communication. There is an obstacle such as a person, metal, or wall between this unit and Bluetooth device. A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit.

Because Bluetooth devices and wireless LAN

(IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following. Use this unit at least 10 m away from the wireless LAN device. If this unit is used within 10 m of a wireless LAN device, turn off the wireless LAN device. Install this unit and Bluetooth device as near to each other as possible.

Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or petrol station near automatic doors or a fire alarm

This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology.

We do not take any responsibility for the leakage of information during Bluetooth communication.

Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. While talking on the phone handsfree, noise may occur, depending on the device or communication environment.

Depending on the device to be connected, it may require some time to start communication. Others

Using the Bluetooth device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used.

If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in these Operating Instructions, consult your nearest Sony dealer. Maintenance Replacing the lithium battery of the remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.

+ side up c Notes on the lithium battery

Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

Wipe the battery with a dry cloth to assure a good contact.

Be sure to observe the correct polarity when installing the battery.

Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10A) 59 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 60 Tuesday, January 17, 2012 6:08 PM Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel

(page 14) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. Main unit Back of the front panel Notes

For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

Never touch the connectors directly with your fingers or with any metal device. Removing the unit 1 Insert both release keys simultaneously until they click. Hook facing inwards. 2 Pull the release keys to unseat the unit. 3 Slide the unit out of the mounting. 60 Specifications FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS 4 Ohms < 1% THD+N SN Ratio: 80 dBA

(reference: 1 Watt into 4 Ohms) 4 at Monitor section Display type: Wide LCD color monitor Dimensions: 6.1 in System: TFT active matrix Number of pixels:

1,152,000 pixels (800 3 (RGB) 480) Color system:

PAL/NTSC/SECAM/PAL-M/PAL-N automatic select Tuner section FM Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency: 25 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 80 dB (mono) Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz AM Tuning range: 530 1,710 kHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency:

9,115 kHz or 9,125 kHz/5 kHz Sensitivity: 26 V DVD/CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit Harmonic distortion: 0.01%

Region code: Labeled on the bottom of the unit USB Player section Interface: USB (High-speed) Maximum current: 1 A Wireless Communication Communication System:

Bluetooth Standard version 2.1 + EDR XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 61 Tuesday, January 17, 2012 6:08 PM Output:

Bluetooth Standard Power Class 2 (Max. +4 dBm) Maximum communication range:

Line of sight approx. 10 m (33 ft)*1 Frequency band:

2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2:

A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.3 HFP (Handsfree Profile) 1.5 PBAP (Phone Book Access Profile) OPP (Object Push Profile)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antennas performance, operating system, software application, etc.

*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. Power amplifier section Outputs: Speaker outputs Speaker impedance: 4 8 ohms Maximum power output: 52 W 4 (at 4 ohms) General Outputs:

Inputs:

Video output terminal (rear) Audio output terminals (front/rear) Subwoofer output terminal Power antenna (aerial)/Power amplifier control terminal (REM OUT) Illumination control terminal BUS control input terminal Remote controller input terminal Antenna (aerial) input terminal Parking break control terminal Microphone input terminal Reverse input terminal Camera input terminal AUX audio input terminals AUX video input terminals USB signal input connector Power requirements: 12 V DC car battery

(negative ground (earth)) Dimensions: Approx. 178 100 173 mm

(7 1/8 4 6 7/8 in) (w/h/d) Mounting dimensions: Approx. 182 111 160 mm

(7 1/4 4 3/8 6 3/8 in) (w/h/d) Mass: Approx. 2.0 kg (4 lb 5 oz) Supplied accessories:

Parts for installation and connections (1 set) Microphone Remote Commander: RM-X271 Panel Case Optional accessories/equipment:

Mobile monitor: XVM-B62 USB and Video connection cable for iPod:

RC-202IPV Rear View Camera: XA-R800C Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information. US and foreign patents licensed from Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Design and specifications are subject to change without notice. Region code The region system is used to protect software copyrights. The region code is located on the bottom of the unit, and only DVDs labeled with an identical region code can be played on this unit. DVDs labeled ALL can also be played. If you try to play any other DVD, the message Playback prohibited by region code. will appear on the monitor screen. Depending on the DVD, no region code may be labeled even though playing the DVD is prohibited by area restrictions. Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, visit the support site on the back cover. General No power is being supplied to the unit.

Check the connection or fuse.

If the unit is turned off and the display disappears, it cannot be operated with the remote commander. t Turn on the unit. The power antenna (aerial) does not extend. The power antenna (aerial) does not have a relay box. There is no beep sound.

The beep sound is canceled (page 46).

An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased.

The reset button has been pressed. t Store again into the memory.

The power supply lead or battery has been disconnected or it is not connected properly. Stored stations and correct time are erased. The fuse has blown. The unit makes noise when the position of the ignition is switched. The leads are not matched correctly with the cars accessory power connector. 61 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 62 Tuesday, January 17, 2012 6:08 PM The display disappears from/does not appear on the monitor.

The dimmer is set to ON (page 50).

The display disappears if you press and hold

(SOURCE/OFF). t Press (SOURCE/OFF) on the unit until the display appears.

M.OFF is set to on and the Monitor Off function is activated (page 10). t Touch anywhere on the display to turn the display back on. The display does not respond to your touch correctly.

Touch one part of the display at a time. If two or more parts are touched simultaneously, the display will not operate correctly.

Calibrate the touch panel of the display (page 43). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Exit the source. Operation of the remote commander is not possible. If the Monitor Off function is activated (no lighting), operation of the remote commander is not possible

(page 10). The menu items cannot be selected. Unavailable menu items are displayed in gray. AUX cannot be selected as the source. All AUX input settings are set to OFF. t Set AUX1 Input/AUX2 Input to Video or Audio (page 53). The monitor angle cannot be adjusted. The monitor was opened while the unit was being reset. t Be sure to close the front panel before you reset the unit. RDS PTY displays None.

The current station is not an RDS station.

RDS data has not been received.

The station does not specify the program type. Picture There is no picture/picture noise occurs.

A connection has not been made correctly.

Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit.

The disc is defective or dirty.

Installation is not correct. t Install the unit at an angle of less than 45 in a sturdy part of the car.

The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. The picture does not fit in the screen. The aspect ratio is fixed on the DVD. There is no picture/picture noise occurs in the rear monitor.

A source/mode which is not connected is selected. If there is no input, no picture appears in the rear monitor.

The color system setting is incorrect. t Set the color system to PAL or NTSC according to the connected monitor (page 47).

The picture of the rear view camera is displayed on this unit. t No picture appears in the rear monitor if the picture of the rear view camera is displayed on this unit. Radio reception The stations cannot be received. The sound is hampered by noises. The connection is not correct. t Connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a cars antenna (aerial) booster

(only when your car has built-in radio antenna

(aerial) in the rear/side glass). t Check the connection of the car antenna (aerial). t If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead. Preset tuning is not possible.

Store the correct frequency in the memory.

The broadcast signal is too weak. Automatic tuning is not possible. The broadcast signal is too weak. t Perform manual tuning. 62 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 63 Tuesday, January 17, 2012 6:08 PM Sound There is no sound/sound skips/sound cracks.

A connection has not been made correctly.

Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit.

The disc is defective or dirty.

Installation is not correct. t Install the unit at an angle of less than 45 in a sturdy part of the car.

The MP3 file sampling rate is not 32, 44.1, or 48 kHz.

The WMA file sampling rate is not 32, 44.1, or 48 kHz.

The AAC file sampling rate is not 44.1 or 48 kHz.

The MP3 file bit rate is not 48 to 192 kbps.

The WMA file bit rate is not 64 to 192 kbps.

The AAC file bit rate is not 40 to 320 kbps.

The unit is in pause/reverse/fast-forward mode.

The settings for the outputs are not made correctly.

The DVD output level is too low (page 21).

The volume is too low.

The ATT function is activated.

The position of the fader control Fader is not set for a 2-speaker system.

The format is not supported (such as DTS). t Check if the format is supported by this unit

(page 9). Sound is noisy. Keep cords and cables away from each other. Disc operation The disc cannot be loaded.

Another disc is already loaded.

The disc has been forcibly inserted upside down or in the wrong way. The disc does not play.

The disc is defective or dirty.

The disc is not playable.

The DVD is not playable due to the region code.

The disc is not finalized (page 56).

The disc format and file version are incompatible with this unit (page 9, 56).

Press Z to remove the disc. MP3/WMA/AAC/JPEG/Xvid/MPEG-4 files do not play.

Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 56).

The file extension is incorrect (page 57).

Files are not stored in MP3/WMA/AAC/JPEG/Xvid/

MPEG-4 format.

If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. t Select the appropriate file type using the list

(page 28). MP3/WMA/AAC/JPEG/Xvid/MPEG-4 files take longer to play than others. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in Multi Session/Multi Border. a disc to which data can be added. The disc does not start playing from the beginning. Resume playback or multi-disc resume playback

(page 52) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed.

Use the DVD menu instead of the direct selection button on the remote commander (page 17).

Multilingual tracks, multilingual subtitles, or multi-

angles are not recorded on the DVD.

The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 13). USB playback Items cannot be played via a USB hub. This unit cannot recognize USB devices via a USB hub. Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with a complicated tree structure. A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent.

The sound may be intermittent at a high bit rate of more than 320 kbps.

During USB Video playback, the playback is intermittent. Press (HOME) or launch the System settings Launch the USB Photo, Navigation, etc. Bluetooth function The other Bluetooth device cannot detect this unit.

Set Signal to ON (page 38).

While connecting to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. 63 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 64 Tuesday, January 17, 2012 6:08 PM This unit cannot detect the other Bluetooth device. Check the Bluetooth setting of the other device. Connection is not possible.

Depending on the other device, searching from this unit may not be possible. t Search for this unit from the other device.

Depending on the status of the other device, searching from this unit may not be possible. t Search for this unit from the other device.

Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone.

Raise the volume while receiving a call.

Depending on the connecting device, the ringtone may not be sent properly. t Set Ringtone to Default (page 37). The talkers voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the MIC Gain level (page 35). Echo or noise occurs during call conversations.

Reduce the volume.

Speech Quality is set to OFF. t Set Speech Quality to Mode 1 or Mode 2

(page 37).

If ambient noise other than the phone call sound is loud, try reducing this noise. t Shut the window if road noise is loud. t Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor. Phone sound quality depends on reception conditions of the cellular phone. t Move your car to a place where you can enhance the cellular phones signal if the reception is poor. The volume of the connected Bluetooth device is low or high. Volume level will differ depending on the Bluetooth device. t Reduce the volume level differences between this unit and the Bluetooth device (page 38). No sound is output during audio streaming. The connected Bluetooth device is paused. t Cancel pause of the Bluetooth device. The sound skips during audio streaming.

Reduce the distance between the unit and the Bluetooth device.

If the Bluetooth device is stored in a case which interrupts the signal, remove the case while using the device.

Several Bluetooth devices or other devices which emit radio waves are used nearby. t Turn off the other devices. t Increase the distance from the other devices.

The playback sound stops momentarily when this unit is connecting to a cellular phone. This is not a malfunction. You cannot control the connected Bluetooth device during audio streaming. Check that the connected Bluetooth device supports AVRCP. Some functions do not work. Check that the connecting device supports the functions in question. The name of the other party does not appear when a call is received.

The other party is not stored in the phonebook. t Add the other party to the phonebook (page 35).

The calling phone is not set to send the phone number. A call is answered unintentionally.

The connecting phone is set to start a call automatically.

Auto Answer of this unit is set to Short or Long (page 37). Pairing failed due to time out. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time by setting a single digit passkey. The Bluetooth function cannot be operated. Exit the source by pressing and holding

(SOURCE/OFF) for 1 second, then turn on the unit. No sound is output from the car speakers during a handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Error displays/messages Bluetooth device is not found. The unit cannot detect a connectable Bluetooth device. t Check the Bluetooth setting of the connecting device. Busy now Please try again. The unit is busy. t Wait for a moment and try again. Cannot read.

The unit cannot read the data due to some problem.

The data is damaged or corrupted.

The disc is corrupted.

The disc is incompatible with this unit.

The disc is not finalized. 64 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 65 Tuesday, January 17, 2012 6:08 PM Disc Error

The disc is dirty or inserted upside down. t Clean or insert the disc correctly.

A blank disc has been inserted.

The disc cannot play due to a problem. t Insert another disc.

The disc is not compatible with this unit. t Insert a compatible disc.

Press Z to remove the disc. Disc Reading... The unit is reading all file/album (folder) information on the disc. t Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. Error

The USB device was not automatically recognized. t Reconnect it again.

Phonebook content has changed during cellular phone access. t Access the phonebook again.

Phonebook access was disconnected by the cellular phone. t Access the phonebook again.

Phonebook download from the cellular phone failed due to a problem. t Download the phonebook again (page 35).

Phonebook browsing from the cellular phone failed due to a problem. t Retry browsing (page 36).

Phonebook listing from the cellular phone failed due to a problem. t Retry listing (page 36). Error - Please select Bluetooth Initialize from the General Settings menu. A memory error has occurred. t Initialize the Bluetooth setting (page 38). FAILURE (Displays for about 1 second.) When the SAT tuner is connected, storing a SAT radio channel in a preset failed. t Be sure to tune to the channel that you want to store, then try it again. Handsfree device is not available. A cellular phone is not connected. t Connect a cellular phone (page 32). Hubs not supported. USB hubs are not supported on this unit. Local Seek +/Local Seek The local seek mode is on during automatic tuning. No device found. No device is in the list of registered Bluetooth device. t Perform pairing with a Bluetooth device (page 32). No playable data. The disc does not contain playable data. Offset There may be an internal malfunction. t Check the connection. If the error indication remains on the display, consult your nearest Sony dealer. Output connection failure.

(Displays until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the supplied Installation/Connections guide to check the connection. Overcurrent Caution on USB The USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE/OFF). t Indicates that the USB device is out of order, or an unsupported device is connected. Playback prohibited by region code. The DVDs region code differs from the units region code. Please push reset. This unit or USB device cannot be operated due to a problem. t Press the reset button (page 13). The connected USB device is not supported. For details on the compatibility of your USB device, visit the support site on the back cover. USB device is not connected. USB is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. USB Reading... The unit is reading all file/album (folder) information in the connected USB device. t Wait until reading is complete and playback starts automatically. Depending on the structure, it may take time. or During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further. The character cannot be displayed with the unit. For Pandora internet radio:

Allow Connection? Check number on mobile device. Check the number on your mobile device. If the number is correct, touch Yes to allow the connection. API Version Error The API versions differ. t Select a source other than Pandora, then select the Pandora source again. Bookmark Error Bookmarking a track or artist failed. t Try bookmarking again. Cannot Skip Skip (Next) is prohibited for the current content. t Wait until the commercial ends. t Pandora limits the number of skips allowed. Wait until the next song begins, or select another station on the list. 65 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 66 Tuesday, January 17, 2012 6:08 PM Cannot Thumbs Up/Down The song does not support Thumbs Up/Down. No Station There is no station on your Pandora account. t Create a station on your mobile device. t Select a source other than Pandora, then select the Pandora source again. Please launch Pandora application on mobile device and touch Connect. The Pandora application has not been launched. t Launch Pandora on your mobile device, then touch Connect. Server Error The Pandora server may have a problem. t Select a source other than Pandora, then select the Pandora source again. SUB UPDT (Subscription Updated), PRESS SELECT Your subscription has been updated. t Press the select button. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of disc playback trouble, bring the disc that was used at the time the problem began. Thumbs Up/Down Error Thumbs Up/Down feedback failed. t Try Thumbs Up/Down again. When not driving please see your device. If your mobile device has a problem, make sure your car is parked in a safe place. t Check other operations on your mobile device, then launch the Pandora application again. t Select a source other than Pandora, then select the Pandora source again. For SiriusXM:

CH LOCKD (Channel Locked) The selected channel is locked by the parental control function. CH UNAVL (Channel Unavailable) The selected channel is not available. The active channel has become unavailable. CH UNSUB (Channel Unsubscribed) There is no subscription to the selected channel. The subscription to the active channel has been terminated. CHK TUNR (Check Tuner) The SiriusXM Connect tuner is not functioning properly. t Disconnect the SiriusXM Connect tuner, and connect it again. CHEK ANT (Check Antenna) The antenna (aerial) is not being used properly. t Make sure the antenna (aerial) is connected and being used properly. CODE ERROR Passkey inputs failed. MEM FAILURE (Memory Failure) This unit failed to store the channel in the preset dial. t Make sure that the channel you intend to store is correct. NOSIGNAL The service is stopped due to a signal interruption. 66 XAV-601BT 4-419-667-11(1) G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01 US02CD-U.fm US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 67 Tuesday, January 17, 2012 6:08 PM Language code list Language code list The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 1028 1032 1039 1044 1045 1051 1052 1053 1057 1059 1060 1061 1066 Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali;

Bangla Tibetan 1067 Breton 1070 Catalan 1079 Corsican 1093 1097 Czech 1103 Welsh 1105 Danish German 1109 Bhutani 1130 Greek 1142 English 1144 1145 Esperanto Spanish 1149 Estonian 1150 Basque 1151 Persian 1157 1165 Finnish Fiji 1166 Faroese 1171 French 1174 1181 Frisian 1183 1186 1194 1196 1203 1209 1217 1226 1229 1233 1235 1239 1245 1248 1253 1254 1257 1261 1269 1283 1287 1297 1298 1299 1300 1301 1305 1307 1311 1313 1326 1327 1332 1334 Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian;

Lettish 1345 Malagasy 1347 Maori 1349 Macedonian 1350 Malayalam 1352 Mongolian 1353 Moldavian 1356 Marathi 1357 Malay 1358 Maltese Burmese 1363 Nauru 1365 1369 Nepali Dutch 1376 Norwegian 1379 Occitan 1393

(Afan)Oromo 1403 1408 Oriya Punjabi 1417 Polish 1428 Pashto;

1435 Pushto Portuguese Quechua Rhaeto-

Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-

Croatian Singhalese Slovak Slovenian 1482 1483 1489 1491 1495 1498 1501 1502 1436 1463 1481 1503 1505 1506 Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapk 1507 1508 1509 1511 1512 1513 1514 1515 1516 1517 1521 1525 1527 1528 1529 1531 1532 1534 1535 1538 1539 1540 1543 1557 1564 1572 1581 1587 1613 Wolof Xhosa 1632 Yoruba 1665 1684 Chinese Zulu 1697 1703 Not specified 67 XAV-601BT 4-419-667-11(1) 04US+03BCO-U.fm masterpage:Left 00US+00COV-U.book Page 68 Tuesday, January 17, 2012 6:08 PM Support site If you have any questions or for the latest support information on this product, please visit the web site below:

Site dassistance Si vous avez des questions ou si vous souhaitez consulter les toutes dernires informations techniques sur ce produit, rendez-vous sur le site Web suivant :

Sitio Web de soporte tcnico en lnea Para resolver cualquier duda u obtener la informacin ms reciente sobre el soporte tcnico de este producto, visite el siguiente sitio Web:

http://esupport.sony.com http://www.sony.com/caraudio If you have any questions/problems regarding this product, try the following:

1 Read Troubleshooting in these 2 Reset the unit. Operating Instructions. Note: Stored data may be erased. 3 Please contact (U.S.A. only);

Call 1-800-222-7669 URL http://www.SONY.com http://www.sony.net/

Sony Corporation Printed in Thailand XAV-601BT 4-419-667-11(1)