all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual (Statements) | Users Manual | 448.58 KiB | August 11 2013 | |||
1 |
|
User Manual | Users Manual | 1.26 MiB | August 11 2013 | |||
1 | Attestation Statements | August 11 2013 | ||||||
1 | Cover Letter(s) | August 11 2013 | ||||||
1 | Cover Letter(s) | August 11 2013 | ||||||
1 | Cover Letter(s) | August 11 2013 | ||||||
1 | Cover Letter(s) | August 11 2013 | ||||||
1 | External Photos | August 11 2013 | ||||||
1 | Internal Photos | August 11 2013 | ||||||
1 | ID Label/Location Info | August 11 2013 | ||||||
1 | Operational Description | August 11 2013 | ||||||
1 | RF Exposure Info | August 11 2013 | ||||||
1 | Test Report | August 11 2013 | ||||||
1 | Test Setup Photos | August 11 2013 | ||||||
1 | Test Setup Photos | August 11 2013 |
1 | User Manual (Statements) | Users Manual | 448.58 KiB | August 11 2013 |
Portable Wireless Server Important information Information importante 4-479-250-11(1) For Customers in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 B/NMB-3 B Read this before using Regarding copyrights The items you saved can be enjoyed as an individual; and under the Copyright Act, they cannot be used otherwise without consent from the rights holders. Battery remaining charge related precautions This device contains a rechargeable battery. If you save to a memory device while the battery has a low remaining charge, the battery charge can run out during the saving process, so the saving can fail. Disclaimer of guarantee of recorded content Even in any situation, such as if you cannot save to external media etc due to some cause such as this devices defects, or if some defect or repair etc causes damage or destruction of saved content in external media, Sony bears absolutely no responsibility of compensating for saved content nor responsibility for any related damages. Also, Sony does not do recovery, restoration, duplication, etc of saved content, in any situation. Precautions on use Do not drop it, put a heavy thing on top of it, hit it with a strong shock, or put pressure on it. These can cause this product to fail. WG-C20 Series 2013 Sony Corporation Printed in China WARNING Do not expose the batteries to excessive heat such as sunshine, fire or the like. UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed. For question regarding your product or for the Sony Service Center nearest you, call 1-888-593-SONY (7669) in the United States or 1-877-899-7669 in Canada. The number below is for the FCC related matters only. For Customers in the U.S.A. Regulatory Information Declaration of Conformity Trade Name : SONY Model No. : WG-C20 Responsible Party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No. : 858-942-2230 This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For Customers in the U.S.A. and Canada RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www. rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion Batteries. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This equipment has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. The maximum SAR level tested for WG-C20 has been shown to be 0.33 W/kg at 1 cm separation from Body. Do not place it in places like the following. Very hot places: Hit by direct sunlight, near a heater, etc It can discolor, deform, or fail. Very cold place, or hot place On a car dashboard or in a car with its windows closed under a hot sun
(especially in summer) Very dusty place On a shaky table or inclined place Place with much vibration Very humid place: Bathroom, etc Near a thing which creates a magnetic field: Magnet, speakers, TV, etc When you hear static on the radio or TV, turn off the power to this product, and move this product away from the radio or TV. When using this product, to prevent damage or deformation of its cabinet, be careful about the following. Do not sit down after putting this product in a back pocket of your pants, etc. While a USB device (USB memory, etc) or USB cable is attached to this device, do not put it in a bag and hit it with a strong force from outside.
* Even if no damage is apparent, the battery or other internal parts may be damaged by heavy shock loads or high pressure. Low temperature burn. Be especially careful if the unit is used continuously over an extended period while it is powering another device via USB connection. The unit may become increasingly warm if it is used continuously over an extended period while it is powering another device via USB connection. Depending on your physical condition, direct skin contact with any hot part of the unit over an extended period may result in redness, itching, rash, or a low temperature burn. Be careful to not get water on it. This product does not have water-proof specifications. Be especially careful about the following situations. Using it while in your pocket in a bathroom, etc When you bend over, etc, it can fall and get wet. Using it in rain, snow, or very humid place Using it when you are sweaty If you touch it with a wet hand or put it in a sweaty clothing pocket, it can get wet. When you quickly bring this product from a cold place to a warm place, or if it is in a room where you just turned on the heat on a winter morning etc, condensation can form on its surface or in this product. Condensation is when moisture in the air attaches to metal plates etc, and water drops form. When condensation forms, do not turn on its power until the condensation goes away, and leave it alone. Using it with condensation can cause failure. This device communicates data by using 2.4GHz radio waves, so if there is a device near it which uses the same frequency, interference can prevent it from communicating. If you do not use it for a long time, you may be unable to fully charge this device. But after charging and using up the battery 2 to 3 times, you will be able to fully charge it. When you do not use this device for a long time, disconnect the USB cable, and store it. Also read the Operating Instructions of other devices you use. Depending on the device, some operation may be needed to charge the battery. Only use the USB cable supplied with this product. For iPhone, iPad and iPod touch, use the special cable supplied when you purchased that device. The power output from the USB port is 1.5A maximum. If the output exceeds 1.5A while power is being supplied, a safety function turns off the power supply. When powering a device from this product, the charging time differs depending on the remaining battery charge. You cannot read or record data that requires copyright protection technology. If the power is cut or the memory device is removed while the memory device is being accessed, then data in the memory device etc can be damaged. To protect data, be sure to make backups. Maintenance When this products surface is dirty Wipe it with a soft cloth (a cloth designed for wiping reading glasses, etc). When it is very dirty, wipe it with a cloth sprinkled with diluted neutral cleaning liquid. Do not use paint thinner, gasoline, alcohol, etc. These can damage the finish of its surface. Take care so water does not get inside. Notes on about memory card Notes on the memory card For the latest information on memory cards you can use, check the Help Guide http://rd1.sony.net/help/pws/c20/gb/
Do not remove the memory card while data is being read or saved. Data can be destroyed in the following situations. While reading or saving data, if the memory card is removed, or if this devices power is turned off When used in a place affected by static electricity or electrical noise It is recommended that you make a back-up of important data. Do not touch terminal with your hand or any metal object. Do not strike, bend, drop or wet this card. Do not attempt to disassemble or convert this card. Do not use or store this card in the following locations:
Where the range of recommended operating conditions is exceeded.
(Inside a closed car in summer or in strong sunshine/in direct sunlight/
near a heater, etc.) Humid or corrosive locations. Check the correct insertion direction before using. Incorrect use can damage the device. When inserting the memory card, if you use too much force, you can damage the memory card or this device. The file systems design limits the file size which can be saved to or played from an SD memory card and SDHC memory card. Each file must be less than 4 GB. Specifications Portable Wireless Server Operating temperature 0 C to 35 C (32 F to 95 F)
(During normal operation) 0 C to 30 C (32 F to 86 F)
(When charging the built-in battery) Charge time / Use time Charge time Use time Approx. 8 hours
(if DC 5V, 500 mA) Approx. 10 hours (Based on test results obtained by our test standards) Refer to the following URL for details. http://rd1.sony.net/help/pws/c20/gb/
Wireless LAN Standard IEEE 802.11b/g/n (2.4 GHz) Frequencies (channels) 2,412 MHz - 2,462 MHz [CH1-11]
Interfaces USB A port (Hi-Speed USB) USB microB port (Hi-Speed USB) SD card slot USB A port output DC 5V, 1.5 A (maximum) USB microB port input DC 5V, 1.0 A (maximum) Average power consumption Approx. 5.0 W (maximum) Compatible memory cards SD memory card, SDHC memory card, SDXC memory card, microSD memory card, microSDHC memory card, microSDXC memory card If you use a microSD memory card with this device, be sure to first put it in a special adaptor. One-touch functions (NFC) DLNA M-DMS Supported USB devices Data Transferring Functions USB Flash Drive Digital still camera (only devices compatible with Mass Storage) External Hard Drive Battery Charging Functions Smartphone/Tablet Digital still camera (USB-type battery charging), etc. Operation with all USB devices is not guaranteed. Dimensions (approx.) 70.9 mm 143.4 mm 8.9 mm (2 7/8 in. x 5 3/4 in. x 3/8 in.) (W H D)
(excluding the projecting parts) Mass (approx.) 135 g (4.76 oz) Design and specifications are subject to change without notice. Included items Main unit (Portable Wireless Server) (1) USB cable (about 40 cm) (1) Quick Start Guide (1) Important information (this leaflet) (1) Warranty card (1) Software License Agreement (1) Help Guide View the Help Guide by clicking the [Help] button in the app installed. See the Quick Start Guide (separate document) for how to browse. You can also see the Help Guide at the following URL:
http://rd1.sony.net/help/pws/c20/gb/
Trademarks DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance. The SDXC logo is a trademark of SD-3C, LLC. Apple, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. In addition, the product names, brand names, service names, etc. used in this document are trademarks or registered trademarks of respective companies or organizations. The and marks are not shown in this document. Before Contacting Us Problems can be resolved quickly by the methods below, so try the checklist below. After you pressed this devices RESET switch, did its problems improve?
After you charged this device, did its problems improve?
Did you read the Quick Start Guide which is included?
Did you look at this devices web site?
WG-C20 series 4-479-250-11(1) Spcifications Serveur sans fil portable Temprature de fonctionnement 0 C 35 C (32 F 95 F)
(Pendant un emploi normal) 0 C 30 C (32 F 86 F)
(Pendant la charge de la batterie intgre) Temps de charge / Autonomie Temps de charge Autonomie Environ 8 heures
(si CC 5 V, 500 mA) Environ 10 heures (Sur la base des rsultats des essais obtenus par nos normes dessai) Pour plus de dtails, reportez-vous lURL suivante. http://rd1.sony.net/help/pws/c20/fr/
LAN sans fil Standard IEEE 802.11b/g/n (2,4 GHz) Frquences (canaux) 2 412 MHz - 2 462 MHz [CH1-11]
Interfaces Port USB A (USB rapide) Port USB microB (USB rapide) Fente pour carte SD Sortie du port USB A CC 5 V, 1,5 A (maximum) Entre Port USB microB CC 5 V, 1,0 A (maximum) Consommation moyenne Environ 5,0 W (maximum) Cartes mmoire compatibles Carte mmoire SD, carte mmoire SDHC, Carte mmoire SDXC, carte mmoire microSD, carte mmoire microSDHC, carte mmoire microSDXC Si une carte mmoire microSD est utilise avec ce dispositif, veillez le mettre dabord dans un adaptateur spcial. Fonctions par simple contact (NFC) DLNA M-DMS Dispositifs USB pris en charge Fonctions de transfert des donnes Cl USB Appareil photo numrique (seulement les dispositifs compatibles avec le stockage de masse) Disque dur externe Fonctions de charge de batterie Smartphone/Tablette Appareil photo numrique (charge de batterie de type USB), etc. Le fonctionnement avec tous les dispositifs USB nest pas garanti. Dimensions (environ) 70,9 mm 143,3 mm 8,9 mm (2 7/8 po 5 3/4 po 3/8 po) (L H P)
(parties saillantes non comprises) Poids (environ) 135 g (4,76 oz) La conception et les spcifications sont susceptibles dtre modifies sans pravis. Articles inclus Appareil principal (Serveur sans fil portable) (1) Cble USB (environ 40 cm) (1) Guide de mise en marche rapide (1) Informations importantes (cette brochure) (1) Carte de garantie (1) Contrat de licence du logiciel (1) Manuel daide Vous pouvez voir le Manuel daide en cliquant sur le bouton [Aide] dans lapplication installe. Voir le Guide de mise en marche rapide (document spar) pour lexploration. Vous pouvez galement consulter le Manuel daide ladresse suivante :
http://rd1.sony.net/help/pws/c20/fr/
Marques commerciales DLNA et DLNA CERTIFIED sont des marques commerciales ou des marques de service de Digital Living Network Alliance. Le logo SDXC est une marque commerciale de SD-3C, LLC. Apple, iPhone, iPad et iPod touch sont des marques commerciales dApple Inc. dposes aux tats-Unis et dans dautres pays. De plus, les noms de produits, les noms de marques, les noms de services, etc. utiliss dans ce document sont soit des marques commerciales soit des marques dposes des socits ou organisations respectives. Les marques et ne sont pas signales dans ce document. Avant de nous contacter Comme la plupart des problmes peuvent tre rgls rapidement, veuillez consulter la liste suivante. Aprs une pression sur le bouton RESET de cet appareil, est-ce que le problme est rsolu ?
Aprs la charge de cet appareil, est-ce que le problme est rsolu ?
Avez-vous lu le Guide de mise en marche rapide fourni ?
Avez-vous consult le site de ce produit ?
AVERTISSEMENT Nexposez pas les piles une chaleur excessive, notamment aux rayons directs du soleil, une flamme, etc. UL est une organisation de scurit reconnue internationalement. La marque UL sur le produit signifie que celui-ci est list par UL. Pour toute question au sujet de ce produit ou pour joindre le Service aprs-vente Sony le plus proche, appeler le 1-888-593-SONY (7669) aux tats-Unis ou le 1-877-899-7669 au Canada. Le numro ci-dessous concerne seulement les questions relevant de la Commission fdrale des communications des tats-Unis (FCC). lintention des clients aux .-U. Information rglementaire Dclaration de conformit Nom commercial : SONY No de modle : WG-C20 Responsable : Sony Electronics Inc. Adresse : 16530 Via Esprillo, San Diego, CA 92127 .-U. No de tlphone : 858-942-2230 Cet appareil est conforme la Partie 15 de la rglementation de la FCC des tats-Unis. Son utilisation est sujette aux deux conditions suivantes : (1) Cet appareil ne doit pas gnrer dinterfrences nuisibles et (2) il doit tre en mesure daccepter toute interfrence reue, y compris les interfrences pouvant gnrer un fonctionnement indsirable. AVERTISSEMENT Par la prsente, vous tes avis du fait que tout changement ou toute modification ne faisant pas lobjet dune autorisation expresse dans le prsent manuel pourrait annuler votre droit dutiliser lappareil. Note :
Lappareil a t test et est conforme aux exigences dun appareil numrique de Classe B, conformment la Partie 15 de la rglementation de la FCC. Ces critres sont conus pour fournir une protection raisonnable contre les interfrences nuisibles dans un environnement rsidentiel. Lappareil gnre, utilise et peut mettre des frquences radio ; sil nest pas install et utilis conformment aux instructions, il pourrait provoquer des interfrences nuisibles aux communications radio. Cependant, il nest pas possible de garantir que des interfrences ne seront pas provoques dans certaines conditions particulires. Si lappareil devait provoquer des interfrences nuisibles la rception radio ou la tlvision, ce qui peut tre dmontr en allumant et teignant lappareil, il est recommand lutilisateur dessayer de corriger cette situation par lune ou lautre des mesures suivantes :
Rorienter ou dplacer lantenne rceptrice. Augmenter la distance entre lappareil et le rcepteur. Brancher lappareil dans une prise ou sur un circuit diffrent de celui sur lequel le rcepteur est branch. Consulter le dtaillant ou un technicien expriment en radio/tlviseurs. Pour les clients aux tats-Unis et au Canada RECYCLAGE DES ACCUMULATEURS AUX IONS DE LITHIUM Les accumulateurs aux ions de lithium sont recyclables. Vous pouvez contribuer prserver lenvironnement en rapportant les piles usages dans un point de collecte et de recyclage le plus proche. Pour plus dinformations sur le recyclage des accumulateurs, tlphonez au numro gratuit 1-800-822-
8837 (Etats-Unis et Canada uniquement), ou visitez http://www.rbrc.org/
Avertissement: Ne pas utiliser des accumulateurs aux ions de lithium qui sont endommags ou qui fuient. Cet quipement ne doit pas tre co-situ ou utilis en conjonction avec une autre antenne ou metteur. Cet appareil est conforme aux exigences de la FCC (Commission amricaine des communications) et dIC (Industrie Canada) relatives aux limites dexposition aux radiations nonces pour un environnement non contrl. Il est galement conforme aux directives de la FCC en matire dexposition aux frquences radiolectriques (RF) nonces au Supplment C de lOET65, ainsi quaux normes dIC relatives lexposition aux frquences radiolectriques nonces au CNR-102 (Cahier des charges sur les normes radiolectriques). Cet appareil prsente des niveaux trs peu levs dnergie RF, rputs conformes sans test du dbit dabsorption spcifique (SAR). Il a t dmontr que le niveau de SAR maximal test pour le WG-C20 slve 0,33 W/kg une distance de sparation du corps de 1 cm. Pour les utilisateurs au Canada Cet appareil est conforme aux normes RSS dIndustrie Canada applicables aux appareils exempts de licence. Son utilisation est soumise deux conditions : (1) cet appareil ne doit pas causer dinterfrences, et (2) cet appareil doit accepter toute interfrence reue, y compris une interfrence pouvant entraner un fonctionnement indsirable de lappareil. CAN ICES-3 B/NMB-3 B Prire de lire ce qui suit avant dutiliser ce produit propos des droits dauteur Les lments sauvegards peuvent tre utiliss de faon individuelle ; sinon, en vertu de la Loi sur les droits dauteur, ils ne peuvent pas tre utiliss sans le consentement des dtenteurs des droits. Prcautions relatives lautonomie de la batterie Ce dispositif contient une batterie rechargeable. Si vous sauvegardez des donnes sur une mmoire alors que la batterie est faiblement charge, la batterie peut spuiser pendant la sauvegarde qui risque de ne pas seffectuer correctement. Exclusion de garantie des contenus enregistrs Sony ne peut absolument pas tre tenu pour responsable dune indemnisation concernant le contenu sauvegard ou tout autre dommage, mme si vous ne pouvez pas sauvegarder ce contenu sur un support externe, etc. cause dune dfectuosit de ce dispositif, ou si une dfectuosit ou une rparation, etc. entrane des dommages ou une destruction du contenu enregistr sur ce support. En outre, Sony neffectue en aucun cas de rtablissement, restauration, duplication, etc. de contenu sauvegard. Prcautions demploi Ne pas laisser tomber, poser un objet lourd dessus, frapper fortement ni exercer de pression dessus. Ceci peut causer une panne de ce produit. Ne pas poser aux endroits suivants. Endroit trs chaud : En plein soleil, prs dun appareil de chauffage, etc. Il pourrait se dcolorer, se dformer ou tomber en panne. Endroit trs froid ou trs chaud Sur le tableau de bord dune voiture ou dans une voiture, toutes vitres closes en plein soleil (surtout en t) Endroit trs poussireux Sur une table branlante ou sur une surface incline Endroit expos de fortes vibrations Endroit trs humide : Salle de bains, etc. Prs dun objet crant un champ magntique : aimant, haut-parleurs, tlviseur, etc. Si du bruit statique est audible sur la radio ou le tlviseur, teignez ce produit et cartez-le de la radio ou du tlviseur. Lorsque vous utilisez ce produit, prenez les prcautions suivantes pour viter dendommager ou de dformer son coffret. Ne vous asseyez pas aprs avoir mis ce produit dans une poche arrire de votre pantalon, etc. Lorsquun dispositif USB (cl USB, etc.) ou un cble USB est raccord ce produit, ne mettez pas ce produit dans un sac et ne le cognez pas fort de lextrieur.
* Mme si aucun dommage nest apparent, la batterie ou dautres pices internes peuvent tre endommages par des chocs violents ou une pression leve. Brlure superficielle Faites particulirement attention si lunit fonctionne en continu pendant une priode prolonge tout en alimentant un autre appareil via une connexion USB. Lunit peut chauffer si elle fonctionne en continu pendant une priode prolonge tout en alimentant un autre appareil via une connexion USB. En fonction de votre condition physique, un contact cutan direct avec une partie chaude de lunit pendant une priode prolonge peut entraner une inflammation, une dmangeaison, une ruption cutane ou une brlure superficielle. Attention de ne pas mouiller ce produit. Ce produit nest pas tanche leau. Faites particulirement attention dans les situations suivantes. Vous avez mis ce produit dans votre poche dans une salle de bains, etc. Il pourrait tomber quand vous vous penchez, etc. Vous utilisez ce produit sous la pluie, la neige ou un endroit trs humide Vous utilisez ce produit alors que vous transpirez Si vous le touchez avec des mains humides ou le mettez dans un vtement humide, il pourrait tre mouill. Lorsque vous portez ce produit sans transition dun endroit froid dans un endroit chaud, ou sil se trouve dans une pice o vous venez juste de mettre le chauffage, par exemple en hiver, lhumidit peut se condenser sur la surface ou lintrieur de ce produit. De la condensation se forme quand lhumidit de lair se dpose sur des plaques mtalliques, etc. et forme des gouttelettes deau. En cas de condensation, nallumez pas ce produit mais attendez que toute la condensation ait disparu. Lutilisation de ce produit malgr la prsence de condensation peut causer une panne. Ce produit communique les donnes par les ondes radio de 2,4 GHz, et si un dispositif proximit utilise la mme frquence, des interfrences peuvent empcher la communication. Si vous nutilisez pas ce produit pendant longtemps, vous ne pourrez peut-tre pas le recharger compltement. Mais si vous chargez et videz la batterie 2 ou 3 fois, vous pourrez nouveau la charger compltement. Si vous nutilisez pas ce produit pendant longtemps, dbranchez le cble USB et rangez-le. Veuillez lire aussi le mode demploi des autres dispositifs utiliss. Selon le dispositif, une manipulation spciale peut tre ncessaire pour charger la batterie. Nutilisez que le cble USB fourni avec ce produit. Pour liPhone, liPad et liPod touch, utilisez le cble spcial fourni lors de lachat de cet appareil. La puissance de sortie du port USB est de 1,5 A maximum. Si la sortie dpasse 1,5 A pendant lalimentation, une fonction de scurit coupe lalimentation. Lorsquun dispositif est aliment par ce produit, le temps de charge dpend de la charge actuelle de la batterie. Il nest pas possible de lire ni denregistrer les donnes exigeant une protection des droits dauteur. Si lalimentation est coupe ou la mmoire retire pendant laccs cette mmoire, les donnes enregistres peuvent tre endommages. Pour protger vos donnes, faites des copies de sauvegarde. Entretien Lorsque la surface de ce produit est sale Essuyez-la avec un chiffon doux (un tissu pour le nettoyage des lunettes, etc.). Sil est trs sale, essuyez-le avec un chiffon humidifi avec du liquide de nettoyage neutre dilu. Ne pas utiliser de diluant de peinture, essence, alcool, etc. Ces produits pourraient endommager la finition de sa surface. Faites attention que de leau ne pntre pas lintrieur. Remarques sur les cartes mmoire Remarques sur les cartes mmoire Pour les toutes dernires informations sur les cartes mmoires que vous pouvez utiliser, consultez le Manuel daide. http://rd1.sony.net/help/pws/c20/fr/
Ne retirez pas la carte mmoire pendant la lecture ou la sauvegarder de donnes. Les donnes peuvent tre dtruites dans les situations suivantes. Pendant la lecture ou la sauvegarde de donnes, si la carte mmoire est retire ou le dispositif teint Si la carte mmoire est utilise un endroit expos de llectricit statique ou des interfrences lectriques Il est conseill de faire une copie de donnes importantes. Ne pas toucher la borne avec les doigts ou un objet mtallique. Ne pas cogner, plier, laisser tomber ni mouiller cette carte. Ne pas essayer de dmonter ni de modifier cette carte. Ne pas utiliser ni ranger cette carte aux endroits suivants :
Endroits ne remplissant pas les conditions de fonctionnement recommandes.
( lintrieur dune voiture close en t ou sous un soleil intense, en plein soleil, prs dun appareil de chauffage, etc.) Endroits exposs lhumidit ou la corrosion. Veillez insrer la carte dans le bon sens avant de lutiliser. Sinon le produit pourrait tre endommag. Si vous insrez la carte mmoire de force, la carte mmoire ou le produit pourront tre endommags. La conception du systme de fichiers limite la taille dun fichier pouvant tre sauvegard sur ou lu depuis une carte mmoire SD ou SDHC. Chaque fichier doit tre infrieur 4 Go. WG-C20 series 4-479-250-11(1)
1 | User Manual | Users Manual | 1.26 MiB | August 11 2013 |
4-479-235-11 (1) About Help Guide Portable Wireless Server Quick Start Guide For smartphones/tablets This Quick Start Guide is designed to easily get you set up so you can start enjoying the benefits of the device. Read this Quick Start Guide when using this unit with a smartphone or tablet. When using this unit with a computer, download Quick Start Guide for Computer users from the following web site. http://www.sony.net/c20/
You can see Help Guide on the app or the web browser. On the app Download the Help Guide by selecting [Setting]
[Downloading the Help Guide]. On the web browser Connect your device to the Internet while your device is connected to this unit, then access (http://www. sony.net/c20/) from your browser. If your device is not connected to the Internet while your device is connected to this unit, you cannot see the Help Guide on your browser. See the Help Guide for how to connect the Internet. Identifying the Parts WG-C20 Series 2013 Sony Corporation Printed in China Expressions in this Guide We use the following expressions in this document. WG-C20 This unit Smartphone/tablet Device File Porter File Manager xxx Examples of Use Wi-Fi Storage Wi-Fi connection View &
Transfer content Smartphone WG-C20 Transfer content Tablet Memory card USB memory USB A port *1 USB micro B port *2 ACCESS (data access) lamp
(Wireless LAN indicator) lamp
(Power feeding indicator) lamp Battery indicator lamp
(Power) button Card slot (SD card) NFC touch point
*1 For powering a smartphone or tablet/
For connecting to a USB memory, etc.
*2 For charging this unit/
For connecting to a computer RESET (reset) switch The MAC address on the label on the bottom of this unit may be needed for connecting. Write it down in the space below. MAC address PC Lamp Indicator of this Unit Battery Charger USB connection Power feeding Smartphone WG-C20 USB Card Reader USB connection Transfer content PC Memory card WG-C20 Data transfer away from home*
Battery indicator lamp Lamp condition Status Charging indicator Amber Charging underway Amber -> off Charging is complete Remaining battery level indicator in use Green, blinking slowly Green, blinking Red, blinking rapidly Off Battery level is high Battery level is medium Battery level is low Battery runs out or power-off Wireless LAN indicator lamp Lamp condition Status Green Wireless LAN is on Green, blinking Wireless LAN is starting up Off Power-off When this unit is in the power feeding mode, the lamp is turned off. Power feeding indicator lamp Lamp condition Status
*Refer to the Help Guide for details. Green During or ready for power feeding Red, blinking Error Off Power-off When the USB 2.0 micro B port is connected to another device such as a computer, power feeding and data access from the USB 2.0 A port to another device cannot be used. And the power feeding indicator lamp is turned off. Step3(a):Installing and launching the App (when using NFC) ACCESS (data access) lamp Lamp condition Status Amber Updating the system software or an error occurred Amber, blinking Accessing data Step1:Charging this unit This unit has a built-in rechargeable battery pack. Charge this unit before use. Charge this unit from a computer or with a USB AC adaptor (sold separately). Charging from a computer Connect this unit to your computer with the USB cable
(supplied). Battery indicator lamp USB cable
(supplied) Charging with a USB AC adaptor (sold sepalately) You can charge this unit by connecting the USB cable
(supplied) to this unit and the USB AC adaptor (sold separately), then connect the USB AC adaptor to the wall outlet (wall socket). Refer to the support page (http://www.sony.net/
c20/) for USB AC adaptors that have been confirmed to work with this unit. When charging is complete, the battery indicator lamp turns off. When charging is complete, remove the USB cable. Approximate charging time Charging devices Computer Charging time XX h USB AC adaptor (when using AC-UD10) XX h*
* Approximate charging time varies depending on the USB AC adaptor (sold separately) used. Step2:Turning on the power
(Power) button for 3 Press and hold down the seconds or more. The power of this unit turns on, then the battery indicator lamp lights. During wireless LAN start up, the wireless LAN indicator lamp blinks. When start up is complete, the lamp remains lit.
(Wireless LAN indicator) lamp Battery indicator lamp
(Power) button Notes When the battery level is low, the remaining battery level indicator blinks (red). Charge this unit. It may take several minutes for this unit to start after turning the power on. This is not a malfunction. To turn off this unit Press and hold down the (Power) button for 3 seconds or more. The power of this unit turns off then the wireless LAN indicator lamp and the battery indicator lamp turn off. Note Do not turn off the power of this unit during data transfer. Connect a memory card or USB device Note Removing the memory card or USB device from this unit while accessing it, can damage important data. Before removing them, make sure that the data access lamp is not blinking. Check the operating guide of your smartphone to see whether your smartphone supports NFC*. If your smartphone is NFC-enabled, proceed to the steps below. If your smartphone is not NFC-enabled, see Step3(b):Installing and launching the App
(when not using NFC).
*NFC is a technology for short-range wireless communication between various devices, such as a mobile phone and IC tag etc. Installing the App Touch your NFC-enabled smartphone or tablet against the NFC touch point of this unit. The device will access the application page on Google Play automatically. If the camera and the smartphone or tablet cannot be connected by NFC, do as follows. Move your smartphone slowly above the N mark of this unit. If your smartphone is in a case, remove the case. Connecting via a Wireless LAN and Launching the App Touch your smartphone against the N mark of this unit. When the home screen of the app appears, the connection is complete. Step3(b):Installing and launching the App (when not using NFC) When not using NFC functions, operate as follows. Installing the App To operate this unit, install a dedicated app onto your device. See the support page (http://www.sony.net/c20/) for compatible operating systems and a list of devices that have been confirmed to work with this unit. Search for File Porter in Google Play or the App Store and install it. Note The app is free. However, there may be a communication fee for downloading. After installing, go Connecting by Wireless LAN without launching the app. Connecting by Wireless LAN Connect this unit to your device by wireless LAN. Do this setting after installing a dedicated app. Note When this connection is made, the internet connection of your device is disconnected. 1 Turn on the power. 2 From the setup menu of your device, turn Wi-Fi on and open the Wi-Fi Networks screen. WG-C20 Series 4-479-235-11(1) Android Wi-Fi ABC123456 Secured with WPA (protected network available) WG-C10-XXXXXX Secured with WPA2 BBBBBB 000000 Secured with WPA2 (protected network available) AAAAAA Secured with WPA/WPA2 (protected network available) DEFGH789 Secured with WPA/WPA2 (protected network available) XXXXXX Secured with WPA/WPA2 (protected network available) Scan Add network iOS Wi-Fi ON Settings Wi-Fi Choose a Network... ABC123456 WG-C10-XXXXXX BBBBBB 000000 AAAAAA DEFGH789 XXXXXX EEEEEE CCCCCC 3 Tap this units SSID [WG-C20-XXXXXX]*
from the list of Wi-Fi networks to connect.
* xxxxxx is the last 6 digits of the MAC address. The MAC address is shown on the back side of this unit. 4 Confirm the connection. Android Wi-Fi ABC123456 Secured with WPA (protected network available) WG-C10-XXXXXX Connected BBBBBB iOS Wi-Fi ON Settings Wi-Fi Choose a Network... ABC123456 WG-C10-XXXXXX Android :
Connection is completed when [Connected] is displayed under the selected SSID and displayed at the top of the screen. is iOS :
Connection is completed when there is a tick to the left of the selected SSID and is displayed at the top of the screen. This unit is now connected to your device by wireless LAN. Launching the App Tap the icon on your smartphone or tablet to launch the app. See Step4: Using the App for how to use the app. Step4:Using the App Home screen of the App If another screen appears, press button to go back to the start-up screen. or the [Back]
Android a b c iOS a b d PWS Manager Photo1.jpg Photo2.jpg Movie.mp4 Graph.xls XLS Folder1 Music.mp3 Photo3.jpg Photo1.jpg Photo2.jpg Movie.mp4 Graph.xls XLS Folder1 Music.mp3 Photo3.jpg Photo4.jpg Device switching button Tap each button to display the list of files and folders in each device. a: Data in the memory card inserted into this unit b: Data in the USB device connected to this unit c: Data in your device d: Date in the camera roll Data update Copy Delete Sort Settings Move to the screen for setting security, internet connection or firmware update. File/Folder list If no memory card is inserted into this unit, no USB device is connected to this unit, or the memory card inserted into this unit or USB device connected to this unit contain no data, nothing shows on the file/folder list screen. Note The screen of your device may be changed.
* iOS is the operating system of iPhone, iPad and iPod touch. Connecting to the Internet 1 Tap screen.
(Settings) on the file/folder list 2 Tap [Internet connection]. The list of available wireless LAN access points is displayed. 3 Tap the SSID of the access point you want to connect to. 4 If necessary, enter the password of the device you want to connect to, then tap
[OK]. If you want to connect to a wireless LAN of which the security has been set, password entry may be required. The unit restarts and is connected to the wireless LAN access point. Hint Tap the SSID connected in step 3 or a registered SSID, to display its network information. A maximum of 6 SSIDs of wireless LAN devices are automatically registered. Tap the SSID connected in step 3 or a registered SSID, to display its network information. To unregister an SSID, tap [Forget] on the information screen of the wireless LAN device. Notes When using at home, an Internet connection and wireless LAN router are required. When using outside the home, check the wireless LAN situation of the location through the public wireless LAN service providers website, etc. Using such services may require a separate contract with the service provider. Connection to all public wireless LAN services is not assured. Wireless LAN exchanges information by radio wave, allowing easy access within the communication range. Consequently, if security settings are not made, there is a risk that a third party on the same network could maliciously access (hack into) your unit. Setting security is your decision and responsibility, and is strongly recommended. It may take time to establish connection, or connection may not be established, depending on the usage environment. It is not possible to connect to any wireless LAN device with a hidden SSID. Powering Other Devices 1 Turn on the power of this unit. 2 Connect the supplied USB cable* to the device you want to power.
* For connecting an iOS device, use the special cable supplied when you purchased that device. Before Powering Check that the remaining battery level of this unit is sufficient. Power supply Powering is available when this unit is in the wireless LAN mode or the power feeding mode. Power-off Wireless LAN mode Power feeding mode Press and hold the power button for 3 seconds or more. Press the power button 0.5 to 1 second. The maximum output is 1 A in the power feeding mode and 500 mA in the wireless LAN mode. By powering in the power feeding mode, the feeding time can be shortened. 3 Connect the other end of the USB cable to the USB A port of this unit.
* See the Help Guide here for a list of devices that support power feeding. http://www.sony.net/c20/
Note If the output exceeds the maximum while supplying power, a safety function turns off the power supply and the power feeding indicator lamp blinks (red). Other functions See the Help Guide about functions bellow. Data transfer away from home Playback images by DLNA Security Set-up About the support page You can see the information of items that have been confirmed to work with this unit on the support page. However it is not guaranteed that this unit is fully operational with the items listed on the support page. http://www.sony.jp/support/pwserver/
Trademarks Apple, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android and Google Play are trademarks of Google Inc. Wi-Fi and Wi-Fi Alliance are registered marks of the Wi-Fi Alliance. WPA and WPA2 are marks of the Wi-Fi Alliance. Other product names, trade names, service names etc. used in this manual are trademarks or registered trademarks of their respective companies or organizations. The DLNA and N mark are not shown in this document. WG-C20 Series 4-479-235-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-11-08 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-11-08
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan Minato-ku
|
||||
1 |
1-7-1 Konan
|
|||||
1 |
Tokyo
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
WGC20
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R******** T********
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/29/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Wireless Server | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. SAR compliance has been demonstrated as described in this filing. This device must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. End users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Highest reported SAR value is 0.33 W/kg on body. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 | Name |
R******** C********
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2412.00000000 | 2462.00000000 | 0.1420000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC