all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
05 (Short-Term Confidential) User Manual | Users Manual | 407.22 KiB | / October 02 2018 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | / October 02 2018 | ||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | External Photos | / October 02 2018 | ||||||
1 | Internal Photos | / October 02 2018 | ||||||
1 | ID Label/Location Info |
1 | 05 (Short-Term Confidential) User Manual | Users Manual | 407.22 KiB | / October 02 2018 |
IC Recorder Operating Instructions GB FR Lets try out your new IC recorder Charge Record Buttons to use (on the IC recorder) Operation indicator
STOP
REC Notes on the operations When the button operations of the remote control do not Built-in microphones work, check if:
the IC recorder is powered.
Charge the IC recorder. Using the supplied USB cable, connect the USB/
Headphone connector inside the USB connector cover to a USB port of a running computer. Charging starts. When the battery is fully charged, the battery indicator will indicate
.
Disconnect the IC recorder. Make sure that the message Accessing is no longer on the display window. Then refer to the Help Guide to remove the IC recorder safely. Power on IC recorder Slide and hold the HOLDPOWER switch on the IC recorder in the direction toward POWER until the window display appears. To power off, slide the HOLDPOWER switch on the IC recorder to POWER and hold it until Power Off appears on the display window. Remote control Operation indicator
To start recording, you can operate either the IC recorder or the remote control. Before you start recording, make sure that the HOLD status is released. You can select a operation scene for each situation by selecting Scene Select in the OPTION menu with the remote control.
Turn the IC recorder so that its built-in microphones point in the direction of the recording source.
Press REC. Make sure that the operation indicator on the IC recorder lights in red, indicating that recording has started.
Press STOP to stop recording. Recording stops and "Saving..." appears on the display window. Listen Your IC recorder is not equipped with a built-in speaker. For audio listening, you need to connect the stereo headphones
(supplied) to the IC recorder with the dedicated headphone cable (supplied). For playback operations, use the remote control. Listening preparation Connect the stereo headphones to the USB/Headphone connector on the IC recorder with the dedicated headphone cable. Slide the HOLD switch away from "HOLD."
To power on the remote control, press any one of the buttons on the remote control. When the operation indicator on the remote control stops flashing, operations with the remote control are available. The remote control is not equipped with the power button. It automatically powers off in the following cases:
if the wireless connection is not established with the IC recorder and you leave the remote control unused for about 5 minutes if the wireless connection is established with the IC recorder and you power off the IC recorder you leave the remote control unused for about 2 hours To use the remote control for operations after it powers off, follow the above procedure to power on the remote control, and then press your desired button on the remote control once again. To prevent unintentional operations (HOLD) The IC recorder and the remote control are each equipped with the switch to hold the operation. Slide the HOLDPOWER switch on the IC recorder or the HOLD switch on the remote control in the direction of HOLD. IC recorder Remote control To start playback Display window (on the IC recorder) Buttons to use (on the remote control) STOP Enter BACK/HOME VOL /+ button Select
(///)
While watching the display window on the IC recorder, operate the remote control to select Recorded Files from the HOME menu.
Select Latest Recording, Search by REC Date, Search by REC Scene, or Folders.
Select your desired file. Playback starts.
To release the IC recorder or the remote control from the Hold status, slide the HOLDPOWER switch towards the center or the HOLD switch away from "HOLD," respectively. Initial settings Display window (on the IC recorder)
Press VOL + or VOL - to adjust the volume.
Press STOP to stop playback.
Right after you stopped recording, you can press to play the file you have just recorded. To add a track mark You can add a track mark at a point at which you want to divide a file later or locate during playback. You can add a maximum of 98 track marks to each file. You can also add track marks during recording. Buttons to use (on the remote control) Delete Display window (on the IC recorder) Buttons to use (on the remote control) Select
(///) Enter OPTION
To delete a file, you need to operate the remote control.
Note Once a file is deleted, you cannot restore it.
While watching the display window on the IC recorder, operate the remote control to select the file you want to delete from the list of recorded files or play back the file you want to delete.
Select Delete a File from the OPTION menu. Delete? appears and the selected file starts playing for your confirmation.
Select Yes. Please Wait appears and stays until the selected file is deleted. Select
(///) Enter When you power on your IC recorder for the first time, the Configure Initial Settings screen appears on the display window of the IC recorder. Use the remote control to make initial settings, such as selecting the display language, setting the clock, and turning on/off the beep sound.
Slide the HOLD switch away from "HOLD" to release the remote control from the HOLD status. Remove the yellow label from the back of the remote control when you use it for the first time.
When Configure Initial Settings screen appears, press any button on the remote control. If the operation indicator on the remote control is flashing, wait until it stops flashing before proceeding to the next step.
Press to start the initial settings.
Select the display language. You can select from the following languages:
English*, Espaol (Spanish), Franais (French)
* Default setting
Set the current year, month, day, hour, and minute.
To go back to the previous clock setting item, press BACK/
HOME.
Select Next.
Select Yes or No to turn on or off the beep sound. When the initial settings finish, the completion message and then the HOME menu screen appears.
Notes You can hear the beep sound only through the headphones connected to your IC recorder. You can change any of the initial settings at any time later. For detailed instructions, refer to the Help Guide. ICD-TX800 4-699-321-41(1) Owners Record The model number is located at the front panel and the serial number is located at the side panel. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. _________________________________ Serial No. __________________________________ You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Refer to the Help Guide This is the Operating Instructions, which provides you with instructions on the basic operations of the IC recorder. The Help Guide is an online manual. Refer to the Help Guide when you would like to know further details, operations and possible solutions when a problem occurs. http://rd1.sony.net/help/icd/t80/h_uc/
Check the supplied items IC Recorder (1) Remote control* (1) Stereo headphones (1) Dedicated headphone cable (1) USB cable (1) Carrying case (1) Operating Instructions (this sheet) Warranty card Application Software, Sound Organizer 2 (Installer file stored in the built-in memory so that you can install it to your computer.)
* A button type lithium battery is already installed. Remote control
Parts and controls IC recorder
Your IC recorder has a built-in clip on its back. You can hook it onto something, such as the hem of a pocket.
Built-in microphones
Operation indicator
Display window
Bluetooth indicator*
USB connector cover
USB/Headphone connector (inside the USB connector cover)
STOP button
HOLDPOWER switch*
REC button
/DPC (Digital Pitch Control) button
Built-in antenna*
STOP button
Operation indicator
HOLD switch
(review/fast backward) button
BACK/
HOME button*4
(play/enter) button*5
REC button
(cue/fast forward) button
OPTION button A-B (repeat A-B) button
/
VOL /+ (volume /+) button*5
T-MARK (track mark) button
RESET button*6
Strap hole (No strap is supplied with your IC recorder.)
Battery case*7
* The indicator changes in color or flashes to indicate the status of the Bluetooth function or the Bluetooth pairing (device registration).
* Sliding the HOLDPOWER switch to POWER and holding it for 8 seconds or longer restarts your IC recorder. Before restarting the IC recorder, make sure the operating indicator is unlit. For detailed instructions, refer to the Help Guide.
* When using the remote control, do not cover the built-in antenna, for example with your hand, so as not to disturb the wireless connection with the IC recorder.
*4 Press this button once to display the previous screen. Press and hold it to display the HOME menu screen.
*5 There is a tactile dot on the (play/enter) button and next to "+" on the VOL /+ (volume /+) button.
*6 Press this button when the remote control seems not working.
*7 A button type lithium battery is already installed.
Your IC recorder is not equipped with built-in speakers. Display window (on the IC recorder) Enter By default, the IC recorder will automatically power off if you leave it unused for 30 minutes. the remote control is released from the HOLD status. the wireless connection process with the IC recorder is in progress. The operation indicator on the remote control flashes while the wireless connection is being established. You can check the indication of the operation indicator on the remote control for the status of the remote control. Indication of the operation indicator Flashes twice in blue*. Status of the remote control Powered on. Lights in blue for 2 seconds. Powered off. Flashes four times in blue*. Resetting of the remote Stays lit in red. Flashes alternately in blue and red. control is complete. Not operable due to battery shortage. Device registration process is in progress. Flashes twice in blue*
repeatedly. Wireless connection process is in progress. Flashes once in blue*. Wireless connection is established and button operations are available.
* When the battery is running out of power, the operation indicator on the remote control lights in red. Operations with the smartphone (REC Remote) Buttons to use (on the remote control) Select
(///) Enter With the BLUETOOTH function of your IC recorder, you can operate your IC recorder (recording, changing the recording settings, etc.) using a smartphone. To operate your IC recorder using a smartphone You need to install REC Remote on the smartphone and make a pairing between the smartphone and your IC recorder. Pairing means having Bluetooth devices registered with each other to establish a wireless connection for the first time. To make a pairing with the IC recorder using REC Remote, you need the latest version of REC Remote. If your smartphone has REC Remote already installed, be sure to upgrade it to the latest version.
Search Google Play or App Store for REC Remote and install it on the smartphone.
On the IC recorder, select REC Remote- Add Device
(Pairing) from the HOME menu with the remote control and follow the on-screen instruction to turn on the Bluetooth function.
On the smartphone, start REC Remote and select ICD-TX800 (your IC recorder) from the available device list. For detailed instructions, refer to the help of REC Remote and the manual supplied with the smartphone. Now you can use the smartphone for IC recorder operations.
Note The device registration (pairing) information is cleared in the following cases. You need to pair the devices once again.
- The settings on the IC recorder, the smartphone, or both devices are reset to the default settings, for example, due to initialization.
- The device registration (pairing) information is deleted, for example, during the course of a repair service. To turn on or off the Bluetooth function of your IC recorder
Select REC Remote - Bluetooth ON/OFF from the HOME menu.
To turn on the Bluetooth function, select ON. To turn it off, select OFF.
Turning off the Bluetooth function conserves battery power. Using the HOME menu You can use the HOME menu for a variety of operations, including locating and playing a recorded file and changing the settings of your IC recorder. Display window (on the IC recorder) Buttons to use (on the remote control) Select (/) Enter BACK/HOME
Select your desired function from the following:
Music Recorded Files Record You can select and play one of the files you have imported from a computer. To locate a music file, select All Songs, Albums, Artists, or Folders. When importing files, be sure to import them into the MUSIC folder. You can select and play one of the files you have recorded with your IC recorder. To locate a recorded file, select Latest Recording, Search by REC Date, Search by REC Scene, or Folders. You can display the record standby screen, and then start recording. REC Remote You can display the menu screen for REC Remote that uses the Bluetooth function. Additionally, you can turn on/off the Bluetooth function or make device registration (pairing) for using REC Remote. You can display the Settings menu screen and change various settings on the IC recorder. Settings Return to XX*You can go back to the screen that was displayed before the HOME menu screen.
* The function you are currently using is displayed in XX.
Press STOP to return to the screen displayed before you entered the HOME menu. Using the OPTION menu You can use the OPTION menu to perform a variety of functions, including changing the settings of your IC recorder. The available items differ depending on the situation. Display window (on the IC recorder) Buttons to use (on the remote control) Select (/) OPTION
To use the OPTION menu, you need to operate the remote control.
Select your desired function from the HOME menu, and then press OPTION.
Select the menu item for which you want to change the setting.
Select your desired setting option. Copying files from your ICrecorder to a computer You can copy the files and folders from your IC recorder to a computer to store them.
Follow the instructions in Charge to connect your IC recorder to a computer.
Drag and drop the files or folders you want to copy from IC RECORDER to the local disk on the computer.
Disconnect your IC recorder from the computer. Installing Sound Organizer 2 Install Sound Organizer on your computer. Sound Organizer allows you to exchange files between your IC recorder and your computer. Songs imported from music CDs and other media, MP3 and other audio files imported to a computer can also be played and transferred to the IC recorder.
Notes Sound Organizer is compatible with Windows computers only. Itis not compatible with Mac. This IC recorder is compatible with Sound Organizer 2 only. If you format the built-in memory, all data stored there will be deleted. (The Sound Organizer software installer will also be deleted.)
When installing Sound Organizer, log in to an account with administrator privileges. The installation procedure varies depending on the Windows version. The following procedure uses Windows 7 as an example.
Follow the instructions in Charge to connect your IC recorder to a computer.
Make sure the IC recorder is successfully detected by the computer. Connecting appears and stays on the IC recorder's display window while the IC recorder is connected to the computer.
Go to the [Start] menu, click [Computer], and then double-click [IC RECORDER] - [FOR WINDOWS].
Double-click [SoundOrganizer_V2001] (or
[SoundOrganizer_V2001.exe]). Follow the computer's on-screen instructions.
Make sure that you accept the terms of the license agreement, select [I accept the terms in the license agreement], and then click [Next].
When the [Setup Type] window appears, select
[Standard] or [Custom], and then click [Next]. Follow the instructions on the screen and set the installation settings when you select [Custom].
When the [Ready to Install the Program] window appears, click [Install]. The installation starts.
When the [Sound Organizer has been installed successfully.] window appears, check [Launch Sound Organizer Now], and then click [Finish].
Note You may need to restart your computer after installing Sound Organizer. Replacing the battery of the remote control When the indicator on the remote control lights in red, the battery is running out of power. Follow these steps to replace the battery. Be sure to use the button type lithium battery, CR2032, for replacement.
Push and hold the tab () toward the groove (), insert your fingernail into the groove (), and then pull out the battery case.
Remove the battery.
Place the new battery with the + side facing up.
Insert the battery case back into the remote control.
Press the RESET button on the back of the remote control.
Press any button on the remote control (the operation indicator on the remote control flashes alternately in blue and red) to power it on, and then power on the IC recorder. When the operation indicator on the remote control stops flashing, operations with the remote control are available. Precautions On power IC Recorder DC 3.7V : the built-in rechargeable lithium-ion battery DC 5.0V : when charged using USB Rated current consumption : 500mA Remote Control DC 3V : CR2032 (Button type lithium battery) On safety Do not operate the unit while driving, cycling or operating any motorized vehicle. On handling Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Should any solid object or liquid fall into the unit, remove the battery and have the unit checked by qualified personnel before operating it any further. When using your IC recorder, remember to follow the precautions below in order to avoid warping the cabinet or causing the IC recorder to malfunction. Do not sit down with the IC recorder in your back pocket. Do not put your IC recorder into a bag with the headphones/earphones cord wrapped around it and subject the bag to strong impact. Be careful not to allow water to splash on the unit. The unit is not waterproof. In particular, be careful in the following situations. When you have the unit in your pocket and go to the bathroom, etc. When you bend down, the unit may drop into the water and may get wet. When you use the unit in an environment where the unit is exposed to rain, snow, or humidity. In circumstances where you get sweaty. If you touch the unit with wet hands or if you put the unit in the pocket of sweaty clothes, the unit may get wet. Listening with this unit at high volume may affect your hearing. For traffic safety, do not use this unit while driving or cycling. Do not use this unit at a place where the inability to hear surrounding sounds may present a danger. You may feel pain in your ears if you use the headphones when the ambient air is very dry. This is not because of a malfunction of the headphones, but because of static electricity accumulated in your body. You can reduce static electricity by wearing non-synthetic clothes that prevent the emergence of static electricity. On noise Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Noise may be recorded when an object, such as your finger, etc., rubs or scratches the unit during recording. On maintenance To clean the exterior, use a soft cloth slightly moistened in water. Then use a soft dry cloth to wipe the exterior. Do not use alcohol, benzine or thinner. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Notes on the Bluetooth function Bluetooth wireless technology allows connection at a distance of up to about 10 m (33 feet). However, the effective range may vary depending on obstructions
(people, metals, walls, etc.) or signal status. Because Bluetooth and wireless LAN (IEEE802.11b/g) devices use the same frequency (2.4 GHz), signal interference may occur, resulting in communication speed decrease, noise, or inability to connect, if Bluetooth communications are used near a wireless LAN device. In such cases, take the following measures. Perform Bluetooth communications at least 10 m (33 feet) away from the wireless LAN device when connecting your IC recorder and a Bluetooth device. Place your IC recorder and the Bluetooth device as close together as possible. Turn off the wireless LAN device when performing Bluetooth communications within about 10 m (33 feet) of a wireless LAN device. Radio waves emitted from a Bluetooth device may affect the operation of equipment such as electronic medical devices. Turn off your IC recorder and other Bluetooth devices in the following locations as failure to do so may cause an accident. In hospitals, near priority seats on trains, in airplanes, in places such as gasoline stations where flammable gases are present, near automatic doors or fire alarms. If the operation indicator on the remote control keeps flashing and the remote control seems not working, you may be able to solve this by having your IC recorder and the remote control registered with each other once again. For detailed instructions on the device registration, refer to the Help Guide. WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Do not dismantle, open or shred secondary cells or batteries. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Secondary cells and batteries need to be charged before use. Always refer to the manufacturers instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Dispose of properly. Do not ingest battery, Chemical Burn Hazard. The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. For IC recorder:
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy
(RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The model has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. For Remote control:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-
102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). For the customer in Canada This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Listening for a Lifetime Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now its time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer, the Consumer Electronics Association
(CEA) and the American Speech-Language-Hearing Association (ASHA) want you to get the most out of your equipment by playing it at a safe level; a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without damaging your sensitive hearing. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. TO ESTABLISH A SAFE LEVEL:
Set your volume control to the lowest level where you can hear the music comfortably and clearly. Prolonged exposure to anything over 85 decibels can cause gradual hearing loss. Once you have established a sound level where you can hear the audio comfortably, clearly and without distortion, set the dial and leave it there. See if your music player has a volume limiter that allows you to set a safe listening level by establishing a maximum volume level on your player. This is a great solution for parents to ensure their children listen at a safe level. Limit listening time to give your hearing quiet breaks. BE SURE TO OBSERVE THE FOLLOWING GUIDELINES WHEN WEARING YOUR HEADPHONES OR EARBUDS:
Do not turn up the volume so high that you cant hear sounds around you. Do not use headphones or earbuds while operating a motorized vehicle; it may create a traffic hazard and is illegal in many areas. Used wisely, your new sound equipment will provide years of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer, CEA and ASHA recommend that you avoid prolonged exposure to excessive noise. The following list of sound levels is included for your information so that you can better protect your hearing. DECIBEL LEVEL EXAMPLES:
30 Whisper 40 Quiet room 50 Moderate rainfall 60 Normal conversation 70 Busy traffic, vacuum cleaner 80 Alarm clock CONSTANT EXPOSURE TO THESE NOISES CAN BE DANGEROUS:
90 Lawn mower, motorcycle 100 Chain saw 110 Rock concert 120 Jet plane takeoff 130 Jackhammer 140 Firecrackers This information courtesy of the American Speech-
Language-Hearing Association (ASHA), the national professional, scientific and credentialing association for more than 135,000 audiologists, speech-language pathologists, and speech, language and hearing scientists. For information on protection against noise-induced hearing loss, call the ASHA Action Center (800-638-8255), Monday through Friday, 8:30 a.m. to 5 p.m. To find an audiologist in your area, visit www.asha.org/findpro. Parents can find helpful information about how to protect their childrens hearing and how to teach them about safe listening at www.listentoyourbuds.org, an ASHA award-winning public education campaign sponsored in part by CEA. A safety tip from the Consumer Electronics Association, 1919 South Eads Street, Arlington, VA 22202 and the American Speech-Language-Hearing Association, 2200 Research Boulevard, Rockville, MD 20850. FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. Declaration of Conformity Trade Name : SONY Model : ICD-TX800 Responsible Party : Sony Electronics Inc. Address : 16535 Via Esprillo, San Diego, CA 92127 USA Telephone Number : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-
222-7669 or http://www.sony.com/
For the state of California, USA only Perchlorate Material -special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Specifications Capacity (User available capacity**) 16 GB (approx. 12.80 GB = 13,743,895,347 Byte) Maximum recording time* (Built-in memory) The maximum recording time of all the folders is as follows. LPCM 44.1 kHz/16 bit (STEREO) MP3 192 kbps (STEREO) MP3 128 kbps (STEREO) MP3 48 kbps (MONO) 21 hours 35 minutes 159 hours 238 hours 636 hours Battery Life IC recorder (a built-in rechargeable lithium-ion battery)
(JEITA)*4*5 REC Mode Recording LPCM 44.1kHz/16bit MP3 192 kbps MP3 128 kbps MP3 48 kbps Approx. 10 hours Approx. 12 hours Approx. 12 hours Approx. 12 hours Playback with the headphones Approx. 10 hours Approx. 12 hours Approx. 12 hours Approx. 12 hours Recording with REC Remote Approx. 4 hours Approx. 4 hours Approx. 4 hours Approx. 4 hours Remote control (an installed button type lithium battery) Approx. 1 year*6 Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*4 IC recorder Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x 0.54inches (13.7 mm) Remote control Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x 0.43inches (10.8 mm) Mass (JEITA)*4 IC recorder Approx. 0.8 oz (22 g) Remote control Approx. 0.5 oz (12 g) Temperature/Humidity Operating temperature Operating humidity Storage temperature Storage humidity 41 F - 95 F (5C - 35C) 25% - 75%
14 F - 113 F (-10C - +45C) 25% - 75%
* A small amount of the built-in memory is used for file management and therefore not available for user storage.
* When the built-in memory is formatted with the IC recorder.
* Default settings for the recording scenes.
*4 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)
*5 When the Screen Off Timer is set to Auto Screen Off.
*6 The battery life is given only for reference purposes. It also varies depending on factors such as usage conditions and ambient temperatures. Bluetooth specification Communication system: Bluetooth specification version 4.0 Maximum communication range: Line of sight approx. 10m
(33 feet)*
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
* The range may vary depending on the communication environment. Trademarks and licenses Microsoft, Windows and Windows Media are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Google Play is a trademark of Google Inc. Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes, Mac, iOS and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Made for iPhone means that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. Compatible iPhone models Bluetooth technology works with iPhone7Plus, iPhone7, iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus, iPhone6, iPhone5s, iPhone5c, iPhone5. The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. Furthermore, and are not mentioned in each in this manual. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. The Sound Organizer 2 uses software modules as shown below:
Windows Media Format Runtime Notes on the License This IC recorder comes with software that are used based on licensing agreements with the owners of that software. Based on requests by the owners of copyright of these software applications, we have an obligation to inform you of the following. Please read the following sections. Licenses (in English) are recorded in the built-in memory of your IC recorder. Establish a Mass Storage connection between the IC recorder and a computer to read licenses in the LICENSE folder. On GNU GPL/LGPL applied software The software that is eligible for the following GNU General Public License (hereinafter referred to as GPL) or GNU Lesser General Public License (hereinafter referred to as LGPL) are included in the IC recorder. This informs you that you have a right to have access to, modify, and redistribute source code for these software programs under the conditions of the supplied GPL/LGPL. Source code is provided on the web. Use the following URL to download it. http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the contents of source code. Licenses (in English) are recorded in the built-in memory of your IC recorder. Establish a Mass Storage connection between the IC recorder and a computer to read licenses in the LICENSE folder. 2017 Sony Corporation Printed in China ICD-TX800 4-699-321-41(1) The display window turns off automatically The Screen Off Timer setting on your IC recorder is set to 30sec by default to save battery power. If you leave both the IC recorder and the remote control unused for 30 seconds, the display window will turn off, but you can still perform any button operations. To turn the display window back on, press BACK/HOME or slide the HOLDPOWER switch on the IC recorder in the direction toward POWER.
To use the HOME menu, you need to operate the remote control.
Press and hold BACK/HOME. The HOME menu screen appears on the display window of the IC recorder. The HOME menu items are aligned in the following sequence.
You can keep the display window from turning off or change the default setting to another timer interval. Press and hold BACK/HOME and select Common Settings - Screen Off Timer, and then select No Auto Screen Off, 15sec, 30sec, 1min, 3min, or 5min. Settings -
Music Recorded Files Record REC Remote Settings Return to XX*
Turn over the remote control to face it down. GB FR Essai de votre nouvel enregistreur IC Enregistrement Charge Touches utiliser (enregistreur IC) Enregistreur IC Mode demploi Microphones intgrs Indicateur de fonctionnement
STOP
REC
Pour commencer l'enregistrement, vous pouvez vous servir soit de l'enregistreur IC soit de la tlcommande. Avant le dbut de l'enregistrement, assurez-vous que l'tat HOLD est dsactiv. Vous pouvez slectionner une scne d'enregistrement pour chaque situation en slectionnant Scene Select dans le menu OPTION avec la tlcommande.
Orientez l'enregistreur IC de manire ce que ses microphones intgrs soient dirigs vers la source d'enregistrement.
Appuyez sur REC. Assurez-vous que l'indicateur de fonctionnement de l'enregistreur IC s'allume en rouge, ce qui indique que l'enregistrement a commenc.
Appuyez sur STOP pour arrter lenregistrement. L'enregistrement s'arrte et Saving... s'affiche l'cran. coute L'enregistreur IC n'est pas dot d'un haut-parleur intgr. Pour couter l'audio, vous devez raccorder les couteurs stro (fournis) l'enregistreur IC avec le cble pour casque ddi (fourni). Pour les oprations de lecture, utilisez la tlcommande. Prparation l'coute Raccordez le cble pour casque ddi aux couteurs stro et au connecteur USB/casque de l'enregistreur IC. Pour commencer la lecture cran (enregistreur IC) Touches utiliser (tlcommande) STOP Entre BACK/HOME VOL /+ button Slection
(///)
Tout en regardant l'cran de l'enregistreur IC, faites fonctionner la tlcommande pour slectionner Recorded Files dans le menu HOME.
Slectionnez Latest Recording, Search by REC Date, Search by REC Scene ou Folders.
Slectionnez le fichier voulu. La lecture commence.
Appuyez sur VOL + ou VOL - pour rgler le volume.
Appuyez sur STOP pour arrter lenregistrement.
Aprs l'arrt de l'enregistrement, vous pouvez appuyer sur pour lire le fichier que vous venez d'enregistrer. Ajout d'un repre de piste Vous pouvez ajouter un repre de piste l'endroit o vous voulez diviser un fichier ultrieurement ou pour le rechercher pendant la lecture. Chaque fichier peut compter jusqu' 98 repres de piste. Vous pouvez galement ajouter des repres de piste pendant l'enregistrement. Suppression cran (enregistreur IC) Touches utiliser (tlcommande) Slection
(///) Entrea OPTION
Pour supprimer un fichier, vous devez utiliser la tlcommande.
Remarque Une fois qu'un fichier a t supprim, il est impossible de le rcuprer.
Tout en regardant l'cran de l'enregistreur IC, utilisez la tlcommande pour slectionner le fichier supprimer de la liste des fichiers enregistrs ou lire le fichier supprimer.
Slectionnez Delete a File dans le menu OPTION. Delete? s'affiche et le fichier en question est lu pour confirmation.
Slectionnez Yes. Please Wait s'affiche jusqu'a ce que le fichier selectionne est supprim. L'cran s'teint automatiquement. La fonction Screen Off Timer de votre enregistreur IC est rgle sur 30sec par dfaut pour conomiser la charge de la batterie. Si vous laissez l'enregistreur IC et la tlcommande inactifs pendant plus de 30 secondes, l'cran s'teint, mais vous pouvez quand mme utiliser les touches. Pour rallumer l'cran, appuyez sur BACK/
HOME ou faites glisser le commutateur HOLDPOWER de l'enregistreur IC vers POWER .
Slectionnez la fonction voulue parmi les suivantes:
Remarques sur les fonctions Lorsque la fonction d'une touche de la tlcommande ne fonctionne pas, vrifiez si :
l'enregistreur IC est allum ;
Par dfaut, il s'teint automatiquement en cas d'inactivit de plus de 30 minutes. la tlcommande ne se trouve plus en mode HOLD. la connexion sans fil avec l'enregistreur IC est en cours. L'indicateur de fonctionnement de la tlcommande clignote lorsque la connexion sans fil a t tablie. Vous pouvez vrifier l'indicateur de fonctionnement qui indique l'tat de la tlcommande. Music Recorded Files tat de la tlcommande Record Permet de slectionner et lire un des fichiers imports d'un ordinateur. Pour rechercher un fichier musical, slectionnez All Songs, Albums, Artists ou Folders. Lors de l'importation de fichiers, assurez-vous de les importer dans le dossier MUSIC. Permet de slectionner et lire un des fichiers enregistrs avec votre enregistreur IC. Pour rechercher un fichier enregistr, slectionnez Latest Recording, Search by REC Date, Search by REC Scene ou Folders. Permet d'afficher l'cran de mise en veille de l'enregistrement, puis de commencer l'enregistrement. Indication de l'indicateur de fonctionnement Clignote deux fois en bleu*. S'allume en bleu pendant deux secondes. Clignote quatre fois en bleu*. S'allume en rouge. Clignote du bleu au rouge d'une manire squentielle. Clignote deux fois en bleu*
de faon rpte. Clignote une fois en bleu*. Allume. teinte. La rinitialisation de la tlcommande est termine. Arrte en raison d'une charge faible de la pile. La procdure d'enregistrement des appareils est en cours. L'tablissement de la connexion sans fil est en cours. La connexion sans fil est tablie et les fonctions des touches sont disponibles.
* Lorsque la charge de la pile est puise, l'indicateur de fonctionnement de la tlcommande s'allume en rouge. Fonctionnement avec un smartphone (REC Remote) REC Remote Permet d'afficher l'cran du menu REC Remote qui utilise la fonction Bluetooth. En outre, vous pouvez activer ou dsactiver la fonction Bluetooth ou effectuer l'enregistrement des appareils (jumelage) avec REC Remote. Permet d'afficher l'cran du menu Settings et de modifier plusieurs rglages de l'enregistreur IC. Settings Return to XX*Permet de revenir l'cran affich avant l'cran du menu HOME.
* La fonction en cours d'utilisation s'affiche dans XX .
Appuyez sur STOP pour revenir l'cran affich avant le menu HOME. Utilisation du menu OPTION Vous pouvez utiliser le menu OPTION pour excuter de nombreuses fonctions, notamment la modification des paramtres de l'enregistreur IC. Les options disponibles varient selon la situation. cran (enregistreur IC) cran (enregistreur IC) Touches utiliser (tlcommande) Touches utiliser (tlcommande) Slection
(///) Entre l'aide de la fonction BLUETOOTH de votre enregistreur IC, vous pouvez commander ce dernier (enregistrement, modification des paramtres d'enregistrement, etc.) l'aide d'un smartphone. Pour utiliser l'enregistreur IC avec un smartphone Vous devez installer l'application REC Remote sur le smartphone et effectuer le jumelage entre le smartphone et l'enregistreur IC. Le jumelage signifie que chaque appareil Bluetooth enregistre la premire fois les informations sur l'autre appareil afin d'tablir une connexion sans fil. Pour effectuer un jumelage avec l'enregistreur IC l'aide de REC Remote, vous devez utiliser la dernire version de REC Remote. Si REC Remote est dj install sur votre smartphone, assurez-vous que vous utilisez la dernire version.
Recherchez dans Google Play ou App Store l'application REC Remote, puis installez-la sur le smartphone.
Sur l'enregistreur IC, slectionnez REC Remote
- Add Device (Pairing) du menu HOME avec la tlcommande, puis suivez les instructions affiches pour activer la fonction Bluetooth.
Sur le smartphone, dmarrez l'application REC Remote, puis slectionnez ICD-TX800
(votre enregistreur IC) sur la liste des dispositifs disponibles. Pour de plus amples informations, reportez-vous l'aide de l'application REC Remote et au manuel fourni avec le smartphone. Vous pouvez prsent utiliser le smartphone pour commander l'enregistreur IC.
Remarque Les informations sur l'enregistrement des appareils (jumelage) sont effaces dans les cas suivants. Vous devrez effectuer un nouveau jumelage de ces appareils.
- Les paramtres de l'enregistreur IC ou du smartphone (ou des deux) ont t rinitialiss leurs valeurs par dfaut, cause d'une initialisation par exemple.
- Les informations sur l'enregistrement des appareils (jumelage) ont t supprimes, pendant une rparation par exemple. Activation et dsactivation de la fonction Bluetooth de l'enregistreur IC
Slectionnez REC Remote - Bluetooth ON/OFF dans le menu HOME.
Slectionnez ON pour activer la fonction Bluetooth. Slectionnez OFF pour dsactiver la fonction Bluetooth.
La dsactivation de la fonction Bluetooth conomise la charge de la pile. Utilisation du menu HOME Vous pouvez utiliser le menu HOME pour effectuer de nombreuses oprations, notamment la recherche et la lecture d'un fichier enregistr, ainsi que la modification des paramtres de votre enregistreur IC. cran (enregistreur IC) Touches utiliser (tlcommande) Slection
(/) Entrea BACK/HOME
Pour utiliser le menu HOME, vous devez utiliser la tlcommande.
Appuyez de manire prolonge sur BACK/HOME. Le menu HOME s'affiche l'cran de l'enregistreur IC. Slection
(/) Entrea OPTION
Pour utiliser le menu OPTION, vous devez utiliser la tlcommande.
Slectionnez la fonction voulue dans le menu HOME, puis appuyez sur OPTION.
Slectionnez l'option de menu pour laquelle vous voulez modifier le paramtre.
Slectionnez l'option de paramtre voulue. Copie de fichiers de l'enregistreur IC vers un ordinateur Vous pouvez copier des fichiers et des dossiers de l'enregistreur IC vers un ordinateur des fins de stockage.
Suivez les instructions de la section Charge pour connecter votre enregistreur IC un ordinateur.
Faites glisser et dposez les fichiers ou dossiers copier de IC RECORDER vers le disque local de l'ordinateur.
Dbranchez l'enregistreur IC de l'ordinateur. Installation de Sound Organizer 2 Installez Sound Organizer dans l'ordinateur. Sound Organizer permet l'change de fichiers entre l'enregistreur IC et l'ordinateur. Les fichiers musicaux imports d'un CD ou autre support, ainsi que les fichiers MP3 et autres fichiers audio imports d'un ordinateur peuvent galement tre lus et transfrs dans l'enregistreur IC.
Remarques Sound Organizer nest compatible quavec les ordinateurs Windows. Il nest pas compatible avec les Mac. Cet enregistreur IC n'est compatible qu'avec Sound Organizer 2. Si vous formatez la mmoire interne, toutes les donnes qui y sont stockes seront supprimes. (Le logiciel Sound Organizer sera galement supprim.)
Lorsque vous installez Sound Organizer, connectez-vous avec un compte ayant des droits dadministrateur. Le processus d'installation varie selon la version de Windows. L'exemple ci-dessous utilise Windows 7.
Suivez les instructions de la section Charge pour connecter votre enregistreur IC un ordinateur.
Assurez-vous que l'enregistreur IC est correctement dtect par l'ordinateur. Connecting s'affiche sur l'cran de l'enregistreur IC lorsqu'il est connect l'ordinateur.
Choisissez le menu [Dmarrer], cliquez sur
[Ordinateur], puis double-cliquez sur [IC RECORDER] - [FOR WINDOWS].
Double-cliquez sur [SoundOrganizer_V2001] (ou
[SoundOrganizer_V2001.exe]). Suivez les instructions affiches l'cran de l'ordinateur.
Assurez-vous d'accepter les dispositions du contrat de licence, slectionnez [I accept the terms in the license agreement], puis cliquez sur [Next].
Lorsque l'cran [Setup Type] s'affiche, slectionnez
[Standard] ou [Custom], puis cliquez sur [Next]. Suivez les instructions affiches et configurez les paramtres d'installation lorsque vous slectionnez
[Custom].
Lorsque l'cran [Ready to Install the Program]
s'affiche, cliquez sur [Install]. L'installation commence.
Lorsque l'cran [Sound Organizer has been installed successfully.] s'affiche, cochez la case
[Launch Sound Organizer Now], puis cliquez sur
[Finish].
Remarque Vous devez redmarrer l'ordinateur aprs l'installation de Sound Organizer. Remplacement de la pile de la tlcommande Lorsque l'indicateur de la tlcommande s'allume en rouge, la charge de la pile est puise. Suivez les instructions ci-
dessous pour remplacer la pile. Assurez-vous d'utiliser une pile bouton au lithium, rfrence CR2032.
Chargez lenregistreur IC. Branchez le cble USB au connecteur USB/casque sous la protection du connecteur USB et un port USB d'un ordinateur en cours de fonctionnement. La charge commence. Lorsque la batterie est compltement charge, lindicateur dautonomie indique
.
Dbranchez lenregistreur IC. Assurez-vous que le message Accessing ne s'affiche plus l'cran. Reportez-vous ensuite au Guide d'aide pour dconnecter correctement l'enregistreur IC. Mise sous tension IEnregistreur IC ICD-TX800 Consultation du Guide daide Ce Mode d'emploi prsente des instructions relatives au fonctionnement gnral de lenregistreur IC. Le Guide daide est un manuel en ligne. Reportez-vous au Guide daide pour de plus amples informations, le fonctionnement et les solutions possibles en cas de problmes. http://rd1.sony.net/help/icd/t80/h_uc/
Faites glisser de manire prolonge le commutateur HOLDPOWER de l'enregistreur IC vers POWER jusqu ce que l'cran apparaisse. Pour mettre l'appareil hors tension, faites glisser le commutateur HOLDPOWER vers POWER de manire prolonge jusqu' ce que Power Off s'affiche l'cran. Tlcommande Indicateur de fonctionnement Faites glisser le commutateur HOLD hors de la position HOLD . Pour allumer la tlcommande, appuyez sur l'une de ses touches. Lorsque l'indicateur de fonctionnement de la tlcommande s'arrte de clignoter, les fonctions de la tlcommande sont disponibles. La tlcommande n'est pas quipe d'une touche de mise hors/sous tension. Elle s'teint automatiquement lorsque l'une des situations ci-dessous se produit :
Si la connexion sans fil n'est pas tablie avec l'enregistreur IC et que la tlcommande reste inactive pendant environ cinq minutes. Si la connexion sans fil est tablie avec l'enregistreur IC et que l'enregistreur IC est teint ;
la tlcommande reste inactive pendant environ deux heures. Pour utiliser la tlcommande aprs sa mise hors tension, suivez la procdure ci-dessus pour l'allumer, puis appuyez de nouveau sur la touche de la tlcommande de votre choix. Prvention contre les oprations involontaires (HOLD) L'enregistreur IC et la tlcommande sont tous deux quips d'un commutateur pour bloquer les fonctions. Faites glisser le commutateur HOLDPOWER de l'enregistreur IC ou le commutateur HOLD de la tlcommande vers HOLD . Enregistreur IC Tlcommande
Pour quitter l'tat Hold de l'enregistreur IC ou de la tlcommande, faites glisser le commutateur HOLDPOWER vers le centre ou le commutateur HOLD hors de la position HOLD , respectivement. Paramtres initiaux cran (enregistreur IC) Touches utiliser (tlcommande) Slection
(///) Entre la premire mise sous tension de l'enregistreur IC, le message Configure Initial Settings s'affiche l'cran. Utilisez la tlcommande pour effectuer la configuration initiale : la slection de la langue d'affichage, le rglage de l'horloge, l'activation ou la dsactivation du bip, par exemple.
Faites glisser le commutateur HOLD de la tlcommande hors de la position HOLD pour sortir du mode HOLD. Retirez l'tiquette jaune l'arrire de la tlcommande la premire utilisation de cette dernire.
Lorsque l'cran Configure Initial Settings s'affiche, appuyez sur une des touches de la tlcommande. Si l'indicateur de fonctionnement de la tlcommande clignote, patientez jusqu' ce qu'il s'arrte de clignoter avant de passer la prochaine tape.
Appuyez sur pour commencer la configuration initiale.
Slectionnez la langue affiche. Vous pouvez choisir entre les langues suivantes :
English* (Anglais), Espaol (Espagnol), Franais
* Paramtre par dfaut
Rglez lanne, le mois, le jour, lheure et les minutes en cours.
Pour revenir au paramtre de configuration prcdent, appuyez sur BACK/HOME.
Slectionnez Next .
Slectionnez Yes ou No pour activer ou dsactiver le bip. Une fois la configuration initiale termine, un message indiquant la fin de la configuration s'affiche puis le menu HOME s'affiche. Vrification des lments fournis Enregistreur IC (1) Tlcommande* (1) couteurs stro (1) Cble pour casque ddi (1) Cble USB (1) tui (1) Mode d'emploi (cette feuille) Carte de garantie Logiciel, Sound Organizer 2 (ficher d'installation enregistr en mmoire intgre pour pouvoir l'installer sur l'ordinateur.)
* Une pile bouton au lithium est dj installe. lments et commandes Tlcommande Enregistreur IC
Votre enregistreur IC est muni dune pince larrire. Vous pouvez l'accrocher quelque part, l'ourlet d'une poche par exemple.
Microphones intgrs
Indicateur de fonctionnement
cran
Indicateur Bluetooth*
Protection du connecteur USB
Connecteur USB/casque (sous la protection du connecteur USB)
Touche STOP
Commutateur HOLDPOWER*
Touche REC
Touche /DPC (Digital Pitch Control)
Antenne intgre*
Touche STOP
Indicateur de fonctionnement
Commutateur HOLD
Touche (rvision/retour rapide)
Touche BACK/
Touche (lecture/entre)*5
Touche REC
Touche (calage/avance rapide)
Touche OPTION
Touche /
Touche VOL /+ (volume /+)*5
Touche T-MARK (repre de piste)
Touche RESET*6
Orifice de la dragonne (dragonne non fournie avec A-B (Rptition A-B) HOME*4 l'enregistreur IC)
Compartiment de la pile*7
* La couleur de l'indicateur change ou l'indicateur clignote pour indiquer l'tat de la fonction Bluetooth ou du jumelage Bluetooth
(enregistrement d'appareils).
* Faites glisser le commutateur HOLDPOWER sur POWER de manire prolonge pendant au moins huit secondes pour redmarrer l'enregistreur IC. Avant le redmarrage de l'enregistreur IC, assurez-
vous que l'indicateur de fonctionnement n'est pas allum. Pour plus d'informations, reportez-vous au Guide d'aide.
* Lors de l'utilisation de la tlcommande, n'obstruez pas l'antenne intgre, avec une main par exemple, pour ne pas perturber la connexion sans fil avec l'enregistreur IC.
*4 Appuyez sur cette touche une fois pour afficher l'cran prcdant. Appuyez de manire prolonge sur cette touche pour afficher l'cran HOME.
*5 Un repre tactile se trouve sur la touche (lecture/entre) et en regard du + de la touche VOL /+ (volume /+).
*6 Appuyez sur cette touche lorsque la tlcommande ne semble pas fonctionner.
*7 Une pile bouton au lithium est dj installe.
L'enregistreur IC n'est pas dot de haut-parleurs intgrs.
Remarques Vous pouvez entendre le bip uniquement avec les couteurs raccords l'enregistreur IC. Vous pouvez modifier n'importe quel paramtre initial ultrieurement. Pour plus d'informations, reportez-vous au Guide d'aide.
Vous pouvez laisser l'cran teint ou modifier le paramtre par dfaut pour choisir un autre intervalle de temps. Appuyez d'une manire prolonge sur BACK/HOME, Settings - Common Settings -
slectionnez Screen Off Timer , puis No Auto Screen Off , 15sec , 30sec , 1min , 3min ou 5min . Les lments du menu HOME sont aligns selon l'ordre suivant.
Music Recorded Files Record REC Remote Settings Return to XX*
Retournez la tlcommande.
Poussez de manire prolonge la languette () vers la rainure (), glissez un ongle dans la rainure (), puis tirez le compartiment de la pile.
Retirez la pile.
Installez une pile neuve en s'assurant que le ct de la polarit + est dirig vers le haut.
Remettez le compartiment de la pile en place dans la tlcommande.
Appuyez sur la touche RESET l'arrire de la tlcommande.
Appuyez sur une des touches de la tlcommande
(l'indicateur de fonctionnement de la tlcommande clignote rapidement d'une manire squentielle (bleu et rouge)) pour la mettre sous tension, puis allumez l'enregistreur IC. Lorsque l'indicateur de fonctionnement de la tlcommande s'arrte de clignoter, les fonctions de la tlcommande sont disponibles. Prcautions Alimentation Enregistreur IC 3,7 V CC : batterie intgre rechargeable au lithium-ion 5,0 V CC : lorsque charge avec USB Consommation lectrique nominale : 500 mA Tlcommande 3 V CC : CR2032 (pile bouton au lithium) Scurit Ne faites pas fonctionner lappareil en conduisant une voiture, une bicyclette ou tout autre vehicule motorise. Manipulation Ne laissez pas lappareil a proximite dune source de chaleur ou dans un endroit expose au rayonnement direct du soleil, a une poussiere excessive ou a des chocs mecaniques. Si des lments solides ou liquides venaient pntrer lintrieur de lappareil, retirez la pile ou la batterie et faites-le vrifier par un technicien qualifi avant de le remettre en service. Lorsque vous utilisez votre enregistreur IC, veillez a suivre les precautions decrites ci-dessous afin deviter de deformer le boitier ou de provoquer un dysfonctionnement de lenregistreur IC. Ne vous asseyez pas apres avoir place lenregistreur IC dans votre poche arriere. Ne placez pas votre enregistreur IC dans un sac apres avoir enroule le cordon du casque/des ecouteurs autour et ne soumettez pas le sac a des chocs violents. Veillez a ne pas renverser deau sur lappareil. Lunite nest pas etanche. Soyez particulierement prudent(e) dans les situations suivantes :
Lorsque vous vous rendez dans la salle de bain, etc., alors que lappareil se trouve dans votre poche. Si vous vous baissez, lappareil risque de tomber dans leau et detre mouille. Lorsque vous utilisez lappareil dans un environnement dans lequel il est expose a la pluie, a la neige ou a lhumidite. Lorsque vous transpirez. Si vous touchez lappareil alors que vos mains sont mouillees ou si vous placez ce dernier dans la poche dun vetement couvert de sueur, il risque detre mouille. Vous risquez de subir des lesions auditives si vous utilisez cet appareil a un volume eleve. Pour des raisons de securite, nutilisez pas cet appareil en voiture ou a velo. N'utilisez pas cette unit dans un endroit o l'incapacit d'entendre les bruits avoisinants risque d'tre dangereuse. Vous risquez davoir mal aux oreilles si vous utilisez le casque alors que lair ambiant est tres sec. Cela nest pas lie a un dysfonctionnement des ecouteurs mais a laccumulation delectricite statique dans votre corps. Vous pouvez diminuer cette electricite statique en portant des vetements non synthetiques evitant son apparition. Bruits Des bruits parasites peuvent se faire entendre si lappareil est place a proximite dune source dalimentation secteur, dune lampe fluorescente ou dun telephone mobile durant lenregistrement ou la lecture. Il se peut que des bruits parasites soient enregistres si quelque chose comme votre doigt par exemple, touche ou frotte accidentellement lappareil pendant lenregistrement. Entretien Pour nettoyer lexterieur, utilisez un chiffon doux legerement impregne deau. Utilisez ensuite un chiffon doux sec pour essuyer lexterieur. Nutilisez pas dalcool, dessence ou de diluant. Si vous avez des questions ou des problemes concernant cet appareil, consultez votre revendeur Sony. Remarques sur la fonction Bluetooth La technologie sans fil Bluetooth permet une connexion une porte d'environ 10 m (33 pi). Toutefois, la porte relle peut varier selon les obstructions (personnes, mtaux, murs, etc.) ou l'tat du signal. Puisque les appareils Bluetooth et sans fil LAN
(IEEE802.11b/g) utilisent la mme frquence (2,4 GHz), des interfrences de signaux risquent de se produire, ralentissant la vitesse de communication, entranant l'apparition de bruits ou perturbant la connexion, si les communications Bluetooth sont effectues proximit d'un appareil LAN sans fil. Dans ce cas, observez les mesures ci-dessous. Effectuez les communications Bluetooth au moins 10 m (33 pi) de l'appareil LAN sans fil lors de la connexion de l'enregistreur IC et de l'appareil Bluetooth. Rapprochez le plus possible l'enregistreur IC et l'appareil Bluetooth. Mettez l'appareil LAN sans fil hors tension lors de communications Bluetooth de moins de 10 m (33 pi). Les ondes radiophoniques mises d'un appareil Bluetooth peuvent perturber le fonctionnement d'quipements tel que les appareils mdicaux lectroniques. teignez l'enregistreur IC et les autres appareils Bluetooth dans les endroits ci-dessous o leur mise sous tension pourrait tre dangereuse. Dans des hpitaux ; les zones siges rservs dans les trains et avions ; dans des stations-service o l'manation des gaz inflammables est possible ; proximit de portes automatiques ou d'avertisseur d'incendie. Si l'indicateur de fonctionnement de la tlcommande continue de clignoter et que la tlcommande semble ne pas fonctionner, le problme pourrait se corriger en enregistrant de nouveau l'enregistreur IC et la tlcommande. Pour plus d'informations sur l'enregistrement d'appareils, reportez-vous au Guide d'aide. AVERTISSEMENT Ne pas exposer les piles (pack de piles ou piles installees) a de fortes chaleurs (rayons du soleil, feu, etc.) pendant une periode prolongee. Ne dmontez pas, n'ouvrez pas ou ne broyez pas les piles ou batteries secondaires. N"exposez pas les piles ou batteries la chaleur ou une flamme nue. vitez le stockage dans un endroit expos aux rayons du soleil. En cas de fuite, ne laissez pas le liquide entrer en contact avec la peau et les yeux. Dans le cas contraire, lavez la surface en question avec beaucoup d'eau et consultez un mdecin. Les piles ou batteries secondaires doivent tre charges avant utilisation. Reportez-vous toujours aux instructions du fabricant ou du manuel de l'appareil pour les instructions de charge correctes. Aprs un stockage prolong, il est ncessaire de charger et de dcharger les piles ou les batteries plusieurs fois afin d'obtenir les meilleures performances possible. Mettez au rebut d'une manire adquate. N'avalez pas une pile ou une batterie sous peine de risques de brulures causes par les produits chimiques qu'elle contient. La tlcommande fournie avec ce produit est dote d'une pile bouton. Si vous avalez celle-ci, vous risquez en moins de deux heures de brler gravement vos organes, voire de mourir. Conservez les batteries et les piles neuves et usages hors de porte des enfants. Si le compartiment de la pile ne se ferme pas compltement, arrtez d'utiliser le produit et rangez-le hors de porte des enfants. Si vous pensez avoir aval une pile (ou qu'elle se trouve dans un organe), consultez immdiatement un mdecin. ATTENTION Risque d'explosion si la pile est remplace d'une manire incorrecte. Remplacez la pile par une pile de mme type. Risque dexplosion en cas de remplacement de la pile par un type incorrect. Mettez les piles usagees au rebut conformement aux instructions. Pour lenregistreur IC :
Les connaissances scientifiques dont nous disposons nont mis en evidence aucun problme de sant associ lusage des appareils sans fil faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil faible puissance sont entirement sans danger. Les appareils sans fil faible puissance mettent une nergie radiolectrique (RF) trs faible dans le spectre des micro-ondes lorsquils sont utiliss. Alors quune dose leve de RF peut avoir des effets sur la sant (en chauffant les tissus), lexposition de faibles RF qui ne produisent pas de chaleur na pas de mauvais effets connus sur la sant. De nombreuses tudes ont t menes sur les expositions aux RF faibles et nont dcouvert aucun effet biologique. Certaines tudes ont suggr quil pouvait y avoir certains effets biologiques, mais ces rsultats nont pas t confirms par des recherches supplmentaires. Le modle a t test et jug conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Pour la tlcommande :
Cet quipement est conforme aux limites d'exposition aux rayonnements FCC / IC dfinis pour un environnement incontrl et rpond aux directives d'exposition la radiofrquence FCC (RF) et au RSS-102 des rgles d'exposition radiofrquence (RF). Cet quipement possde des niveaux d'nergie RF trs faibles qui sont considrs comme conformes sans test du taux d'absorption spcifique (SAR). Pour les utilisateurs au Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. couter pour la vie En choisissant un matriel audio de haute qualit tel que lappareil que vous venez dacheter, prparezvous vivre une nouvelle exprience musicale. Maintenant, il est temps de voir comment vous pouvez dcupler le plaisir offert par votre matriel. Le fabricant, la CEA (Consumer Electronics Association) et lASHA (American Speech-Language-Hearing Association) souhaitent que vous profitiez pleinement de votre matriel en rglant un niveau dcoute salutaire ;
cest--dire un niveau sonore dune clart exceptionnelle sans avoir augmenter le volume et sans distorsion et, plus important encore, qui limite le risque de traumatismes auditifs. Le son peut tre trompeur. Avec le temps, le niveau de votre confort dcoute ( comfort level ) sadapte des volumes sonores plus levs. Par consquent, un niveau sonore qui vous semble normal peut savrer puissant et nfaste pour vos capacits auditives. Prservez-les en rglant votre appareil sur un niveau salutaire AVANT que ce ne soit votre audition qui sadapte. POUR TABLIR UN NIVEAU SALUTAIRE :
Rglez le volume sur le niveau minimum qui conserve la fois un niveau dcoute confortable et la clart du son. Toute exposition prolonge un son quel quil soit de plus de 85 dcibels peut entraner une perte auditive progressive. Une fois que vous avez tabli un niveau sonore qui offre une coute confortable, claire et sans distorsion, rglez la molette et conservez ce rglage. Vrifiez si votre lecteur de musique est dot dun limiteur de volume qui vous permet de rgler un niveau dcoute salutaire en tablissant un niveau de volume maximum sur votre lecteur. Cest une excellente solution pour les parents afin dassurer que leurs enfants coutent un niveau salutaire. Limitez le temps dcoute en instaurant des temps de rcupration ( quiet breaks ) pour prserver votre capacit auditive. VEILLEZ RESPECTER LES DIRECTIVES SUIVANTES LORSQUE VOUS PORTEZ UN CASQUE OU DES COUTEURS :
vitez de rgler le volume un niveau qui vous empche dentendre les sons environnants. Nutilisez ni casque ni couteurs lorsque vous conduisez un vhicule motoris, vous risqueriez de provoquer un accident. En outre, cela est interdit par la loi dans de nombreux pays. Utilis de faon raisonnable, votre nouvel quipement sonore vous procurera des annes de plaisir. Les pertes daudition entranes par les sons forts tant souvent dtectes trop tard, le fabricant, la CEA et lASHA vous recommandent dviter toute exposition prolonge au bruit excessif. titre information, la liste suivante rpertorie les niveaux de son afin que vous puissiez mieux prserver vos capacits auditives. EXEMPLES DE NIVEAUX DE DCIBELS :
30 Murmure 40 Pice tranquille 50 Pluie moyenne 60 Conversation normale 70 Circulation dense, aspirateur 80 Rveil-matin LEXPOSITION CONSTANTE CES BRUITS PEUT TRE DANGEREUSE :
90 Tondeuse, motocyclette 100 Scie chane 110 Concert rock 120 Dcollage dun avion ract 130 Marteau pneumatique 140 Ptards mche Cette information a t fournie grce laimable autorisation de lASHA (American Speech-Language-
Hearing Association), lassociation nationale professionnelle, scientifique et daccrditation de plus de 135000 audiologistes, orthophonistes et scientifiques de la parole, du langage et de l audition. Pour obtenir plus dinformations sur la protection contre la perte auditive cause par le bruit, appelez le centre dintervention de lASHA au 800-638-8255, du lundi au vendredi, entre 8H30 et 17H00. Pour trouver un audiologiste dans votre secteur, rendez-vous sur le site www.asha.org/
findpro. Les parents peuvent trouver des informations utiles sur le site www.listentoyourbuds.org, une campagne dducation publique prime de lASHA commandite en partie par la CEA, pour prserver les capacits auditives de leurs enfants et les sensibiliser lcoute salutaire. Un conseil de scurit de la CEA (Consumer Electronics Association), 1919 South Eads Street, Arlington, VA 22202 et de lASHA (American Speech-Language-Hearing Association), 2200 Research Boulevard, Rockville, MD 20850. Caractristiques techniques Capacit (capacit disponible l'utilisateur**) 16 Go (environ 12,80 Go = 13 743 895 347 octets) Dure maximale d'enregistrement* (mmoire interne) La dure maximale d'enregistrement de tous les dossiers est la suivante. LPCM 44.1 kHz/16 bit (STEREO) MP3 192 kbps (STEREO) MP3 128 kbps (STEREO) MP3 48 kbps (MONO) 21 heures et 35 minutes 159 heures 238 heures 636 heures Autonomie de la batterie Enregistreur IC (batterie intgre rechargeable au lithium-ion)
(JEITA)*4*5 REC Mode Enregistrement LPCM 44.1kHz/16bit MP3 192 kbps MP3 128 kbps MP3 48 kbps Environ 10 heures Environ 12 heures Environ 12 heures Environ 12 heures Lecture avec le haut-parleur intgr Environ 10 heures Environ 12 heures Environ 12 heures Environ 12 heures Enregistrement avec REC Remote Environ 4 heures Environ 4 heures Environ 4 heures Environ 4 heures Tlcommande (pile bouton au lithium) environ 1 an*6 Dimensions (l/h/p) (parties saillantes et commandes non comprises) (JEITA)*6 Enregistreur IC Environ 1,50 po (38,0 mm) x 1,50 po (38,0 mm) x 0,54 po (13,7 mm) Tlcommande Environ 1,50 po (38,0 mm) x 1,50 po (38,0 mm) x 0,43 po (10,8 mm) Poids (JEITA)*4 Enregistreur IC Environ 0,8 once (22 g) Tlcommande Environ 0,5 once (12 g) Temprature/Taux d'humidit Temprature de fonctionnement Taux d'humidit de fonctionnement Temprature de stockage Taux d'humidit de stockage 41 F - 95 F (5C - 35C) 25% - 75%
14 F - 113 F (-10C - +45C) 25% - 75%
* Une petite partie de la mmoire intgre est rserve la gestion des fichiers et nest donc pas disponible pour le stockage.
* Lorsque la mmoire intgre est formate laide de lenregistreur IC)
* Paramtres par dfaut pour les scnes denregistrement
*4 Valeur mesure daprs la norme JEITA (Japan Electronics and Information Technology Industries Association)
*5 Lorsque Screen Off Timer est rgl sur Auto Screen Off .
*6 L'autonomie de la pile/batterie est indique but de rfrence uniquement. Elle varie galement en fonction de critres tels que les conditions d'utilisation et les tempratures ambiantes. Spcification Bluetooth Systme de communication : Spcification Bluetooth, version 4.0 Porte de communication maximale : Environ 10 m (33 pi)*
Bande de frquences : Bande de 2,4 GHz (2,4000 GHz -
2,4835 GHz)
* La porte dpend de l'environnement de communication. Marques commerciales et licences Microsoft, Windows et Windows Media marques commerciales ou des marques dposes de Microsoft Corporation aux tats-Unis et/ou dans dautres pays ou rgions. Technologie dencodage audio MPEG Layer-3 et brevets sous licence de Fraunhofer IIS et Thomson. Google Play est une marque commerciale de Google Inc. Apple, le logo Apple, iPhone, iPod, iPod touch, iTunes, Mac, iOS et macOS ont des marques commerciales de Apple Inc., dposes aux tats-Unis d'Amrique et dans d'autres pays. App Store est une marque de service d'Apple Inc. Made for iPhone signifie quun accessoire lectronique a t conu pour tre connect spcifiquement un iPod ou iPhone, et quil a t certifi par le dveloppeur comme tant conforme aux normes de performances Apple. Apple nest pas responsable du bon fonctionnement de cet appareil ni de sa conformit aux normes rglementaires et de scurit. Veuillez noter que lutilisation de cet accessoire avec un iPod ou iPhone peut affecter les performances des transmissions sans fil. Modles iPhone compatibles Bluetooth technology works with iPhone7Plus, iPhone7, iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus, iPhone6, iPhone5s, iPhone5c, iPhone5. La marque et les logos BLUETOOTH sont des marques dposes dtenues par Bluetooth SIG, Inc. et sont utiliss sous licence par Sony Corporation. Les autres marques commerciales et marques dposes sont des marques commerciales ou des marques dposes de leurs propritaires respectifs. Les autres marques commerciales et marques dposes apparaissant dans le prsent document sont des marques commerciales ou dposes de leurs propritaires respectifs. En outre, et ne sont pas mentionns systmatiquement dans ce guide. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Le Sound Organizer 2 utilise des modules logiciels indiqus ci-dessous :
Windows Media Format Runtime Remarques sur la Licence Cet enregistreur IC est dot de logiciels qui sont utiliss sur la base de contrats de licence avec les propritaires de ces logiciels. la demande des dtenteurs des droits dauteur de ces applications logicielles, nous sommes dans lobligation de vous communiquer les informations suivantes. Veuillez lire les sections suivantes. Les licences (en anglais) sont enregistres dans la mmoire intgre de votre enregistreur IC. Stockage de masse entre lenregistreur IC et un ordinateur pour lire les licences dans le dossier LICENSE. propos des logiciels sous licence GNU GPL/LGPL Les logiciels susceptibles dtre couverts par la GNU General Public License (ci-aprs dsigne par GPL) ou la GNU Lesser General Public License (ci-aprs dsigne par LGPL) sont inclus dans lenregistreur IC. Cette notice vous informe que vous avez un droit daccs, de modification et de redistribution du code source pour ces programmes logiciels conformment aux conditions de la licence GPL/LGPL fournie. Vous trouverez le code source sur Internet. Utilisez lURL suivante pour le tlcharger. http://www.sony.net/
Products/Linux/
Nous prfrerions que vous ne nous contactiez pas propos du contenu du code source. Les licences (en anglais) sont enregistres dans la mmoire intgre de votre enregistreur IC. tablissez une connexion Stockage de masse entre lenregistreur IC et un ordinateur pour lire les licences dans le dossier LICENSE. 2017 Sony Corporation Printed in China ICD-TX800 4-699-321-41(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-24 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-08-24
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
RMTTX800
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R******** T********
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
T****** I********
|
||||
1 | Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
||||
1 |
Kanagawa-ken, 259-1220
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-46********
|
||||
1 | Fax Number |
81-46********
|
||||
1 |
T******@sony.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/10/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote control | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is Conducted(Peak). End-users must be provided with specific operating instructions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Shonan EMC EMC Lab.
|
||||
1 | Name |
T******** H****
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81 5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0011000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC