FCC ID: AK8UTXM40 UHF SYNTHESIZED WIRELESS MICROPHONE

 

A B C D 5-009-936-01 (1) WIRELESS MICROPHONE PACKAGE Before Use Avant lutilisation Antes de Usar UWP-D21/D22/D26 UTX-B40/M40/P40 URX-P40 2019 Sony Corporation Printed in Korea 5009936010 ON/OFF USB USB ON/OFF ON/OFF RF 3 7 63 19 USB USB Type-CUSBUSB USB USB 8 9 7 7 8 3 38 JBRC http://www.jbrc.com/

UTX-B40/M40/P40 S-4_v005-000_5-009-936-01(1)_201907101714_JP_1/4 0 7 63 31 S-4D_v003-000_5-009-936-01(1)_201907101714_JP_2/4 EMC E-8_v008-000_5-009-936-01(1)_201907101714_JP_3/4 W-8_v003-000_5-009-936-01(1)_201907101714_JP_4/4 URX-P40 S-4_v005-000_5-009-936-01(1)_201907101718_JP_1/3 S-4D_v003-000_5-009-936-01(1)_201907101718_JP_2/3 EMC E-8_v008-000_5-009-936-01(1)_201907101718_JP_3/3 S-4D_v003-000_5-009-936-01(1)_201907101718_JP_2/3 EMC E-8_v008-000_5-009-936-01(1)_201907101718_JP_3/3 CD-ROM Adobe Reader Adobe ReaderAdobe 1CD-ROMindex.html 2 CD-ROM UTX-B40/M40/P40 RF S/N NFC IR SYNC USB UTX-B40 1/4 3.5 mm3 60 dBVMICGAIN MODENORMAL PLL 806.125 MHz 809.750 MHz 10 mW/2 mW 50s 5 kHz60 dBV1 kHz 0.9%60 dBV1 kHz 60 dB60 dBV1 kHz 102 dBGAIN MODEAUTO GAIN 96 dBGAIN MODENORMAL 0.35 UWP-D32.382 kHz UWP32 kHz WL80032.768 kHz DC 3.0 V32 DC 5.0 VUSB Type-C 0 50 20 55 0 dB 4 dBuLINE 40 Hz 15 kHzTypical 0 dB 27 dB3 dB POWERAUDIO/MUTE 10 3LR62 10mW25 DISPLAY MODEAUTO OFF 63 73 19 mm 83 g 40 Hz 20,000 Hz 43.0 dB 3 dB0 dB =1 V/Paat 1 kHz 0 50 20 55 2.3 mm2 1.2 m 6.8 19.5 mm 16.2 g ECM-V1BMP UTX-M40 1/4 55 dBVGAIN MODENORMAL 151 dB SPL 21 dB 0 dB 70 Hz 15 kHzTypical 0 dB 21 dB3 dB POWER/MUTE 10 3LR62 10mW25DISPLAY MODEAUTO OFF UTX-P40 48 258 mm 255 g 60 dBVMICGAIN MODENORMAL 0 dB 50 Hz 15 kHzTypical 0 dB 48 dB3 dB XLR-3-11C POWERAUDIO/MUTE+48V 3LR6210mW25 DISPLAY MODEAUTO OFF

+48V OFF10

+48V ONECM-6737 38 98 38 mm 139 g URX-P40 1/4 60 dBV3.5 mm3 0 dB 20 dBFS 50 dBV 0 dB 0 dB 12 dB 12 dB3 dB 3.5 mm3 10 mW16-ohm 3.5 mm PLL 806.125 MHz 809.750 MHz 60 dB1 kHz Sin5 kHz S/N 0.35 0.24 50s 5 kHz 40 Hz 15 kHzTypical 0.9%1 kHz Sin5 kHz UWP-D32.382 kHz UWP32 kHz WL80032.768 kHz POWERRF 0 50 20 55 NFC USB Type-C DC 3.0 V32 DC 5.0 VUSB 6 3LR625 DISPLAY MODEAUTO OFF 63 70 31 mm 131 g English Before operating the unit, please read this manual thoroughly and retain it for future reference. The U90 model can only be used in the USA. The use of U90 transmitters requires a license and is subject to restrictions on frequency selection and channel spacing. For the UTX-B40/M40/P40 Transmitters WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. S-1_v007-000_5-009-936-01(1)_201907101714_GB_1/62 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country. S-4_v005-000_5-009-936-01(1)_201907101714_GB_2/62 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery or the product, you must obey the law in the corresponding area or country. Do not dispose of the battery or the product in a fire or a hot oven, or mechanically crush or cut the battery. It may explode or cause a fire. Do not subject the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not place the battery in a high temperature place, such as under direct sunlight or near fire. It may ignite, explode, or cause a fire. Do not immerse or wet the battery in water or seawater. This may cause an electric shock. S-4D_v003-000_5-009-936-01(1)_201907101714_GB_3/62 This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. S-14_v006-000_5-009-936-01(1)_201907101714_GB_4/62 CAUTION Danger of explosion if battery is incorrectly replaced. When the internal battery needs to be replaced, please contact a qualified service person. Danger of fire or explosion. When you dispose of the battery or the product, you must obey the law in the relative area or country. Do not dispose of the battery or the product into a fire or a hot oven, or mechanically crush or cut the battery. Danger of fire, explosion or electric shock. Avoid operating or storing the product in the following locations. Extremely hot or cold places (for operating temperature, see Installation Manual.) Locations where corrosive gas or flammable gas is emitted, or where salt damage may occur. S-78_v006-000_5-009-936-01(1)_201907101714_GB_5/62 ATTENTION The electromagnetic fields at the specific frequencies may influence the sound of this unit. E-24B_v010-000_5-009-936-01(1)_201907101714_GB_6/62 All interface cables used to connect the equipment to peripherals must be shielded type to comply with EMC standard(s) and to prevent undesired operation due to radiated emissions. When cables are supplied, always use them for this purpose. E-8_v008-000_5-009-936-01(1)_201907101714_GB_7/62 For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. E-6_v003-000_5-009-936-01(1)_201907101714_GB_8/62 You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. E-7_v002-000_5-009-936-01(1)_201907101714_GB_9/62 If you have any questions about this product, you may call:

Sony Customer Information Service Center 1-800-222-7669 or http://

www.sony.com/

Suppliers Declaration of Conformity Trade Name Model

: SONY

: UTX-B40/UTX-M40/UTX-P40 Responsible party

: Sony Electronics Inc. Address

: 16535 Via Esprillo, San Diego, CA Telephone Number 92127 U.S.A.

: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. E-10A_v002-000_5-009-936-01(1)_201907101714_GB_10/62 All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules. R-4_v002-000_5-009-936-01(1)_201907101714_GB_11/62 Important Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and body

(excluding extremities: hands, wrists and feet). R-6_v001-000_5-009-936-01(1)_201907101714_GB_12/62 FCC Radiation Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. UTX-B40/UTX-M40/UTX-P40 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. R-7_v004-000_5-009-936-01(1)_201907101714_GB_13/62 In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. R-78_v001-000_5-009-936-01(1)_201907101714_GB_14/62 Use of Sony wireless devices is regulated by the Federal Communications Commission as described in Part 74 subpart H of the FCC regulations and users authorized thereby are required to obtain an appropriate license. W-1_v003-000_5-009-936-01(1)_201907101714_GB_15/62 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. W-11_v002-000_5-009-936-01(1)_201907101714_GB_16/62 For the customers in Canada CAN ICES-3 (B)/NMB-3(B) E-13_v002-000_5-009-936-01(1)_201907101714_GB_17/62 For the customers in Canada This device complies with Industry Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. R-10_v004-000_5-009-936-01(1)_201907101714_GB_18/62 IC Exposure of Humans to RF Fields The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website www.hc-sc.gc.ca/index-eng. php R-11_v002-000_5-009-936-01(1)_201907101714_GB_19/62 The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met. R-12_v002-000_5-009-936-01(1)_201907101714_GB_20/62 The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, For the customers in Canada This device complies with Industry Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. R-10_v004-000_5-009-936-01(1)_201907101714_GB_18/62 IC Exposure of Humans to RF Fields The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website www.hc-sc.gc.ca/index-eng. php R-11_v002-000_5-009-936-01(1)_201907101714_GB_19/62 The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met. R-12_v002-000_5-009-936-01(1)_201907101714_GB_20/62 The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. UTX-B40/UTX-M40/UTX-P40 has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency

(RF) Exposure rules. R-67_v002-000_5-009-936-01(1)_201907101714_GB_21/62 This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canadas document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-

Exempt Low-Power Radio Apparatus in the TV Bands. W-13_v004-000_5-009-936-01(1)_201907101714_GB_22/62 For the customers in Europe Hereby, Sony Corporation declares that the radio equipment types listed above are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_GB_23/62 Frequency range : 470 MHz to 694 MHz Maximum RF power output : 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_GB_24/62 Voor klanten in Europa Hierbij verklaart Sony Corporation dat de bovenstaande radioapparatuurmodellen conform zijn met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: http://www.compliance. sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_NL_25/62 Frequentiebereik: 470 MHz tot 694 MHz Maximaal RF-vermogen: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_NL_26/62 Fr kunder i Europa Hrmed frskrar Sony Corporation att de ovanstende modellernas typ av radioutrustning verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_SE_27/62 Frekvensintervall: 470 MHz till 694 MHz Maximal RF-effekt: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_SE_28/62 Para clientes na Europa O(a) abaixo assinado(a), Sony Corporation, declara que o presente tipo de equipamento dos modelos supracitados est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_PT_29/62 Intervalo de frequncia: 470 MHz para 694 MHz Potncia mxima de RF: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_PT_30/62 For kunder i Europa Hermed erklrer Sony Corporation, at radioudstyrstypen for modellerne ovenfor er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_DK_31/62 Frekvensomrde: 470 MHz til 694 MHz Maksimal RF-udgangseffekt: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_DK_32/62 Asiakkaille Euroopassa Sony Corporation vakuuttaa, ett edell mainittujen mallien radiolaitetyyppi on direktiivin 2014/53/EU mukainen. EU-

vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_FI_33/62 Taajuusalue: 470 MHz 694 MHz Enimmislhetysteho radiotaajuudella: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_FI_34/62 For kunder i Europa Sony Corporation erklrer herved at modellene over er av en radioutstyrstype som er i samsvar med direktiv 2014/53/EU. Den komplette EU-samsvarserklringen finner du p flgende internettadresse: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_NO_35/62 Frekvensomrde: 470 MHz til 694 MHz Maksimal RF-utgangseffekt: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_NO_36/62 Sony Corporation , 2014/53/

.

: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_GR_37/62

: 470 MHz 694 MHz RF: 30 mW Ar o Sony Corporation deklar, ka augstk minto modeu radioiekrtas tips atbilst direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_LV_49/62 Frekvenu diapazons: no 470 MHz ldz 694 MHz Maksiml RF izejas jauda: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_LV_50/62 Europos klientams Mes, Sony Corporation, patvirtiname, kad aukiau ivardint modeli radijo rengini tipai atitinka direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas pasiekiamas iuo internetiniu adresu: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_LT_51/62 Dani intervalas: nuo 470 MHz iki 694 MHz Didiausia RD galios ivestis: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_LT_52/62 Dla klientw w Europie Sony Corporation niniejszym owiadcza, e powysze modele urzdze s zgodne z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_PL_53/62 Zakres czstotliwoci: od 470 MHz do 694 MHz Maksymalna moc wyjciowa czstotliwoci radiowej: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_PL_54/62 Pre zkaznkov v Eurpe Sony Corporation tmto vyhlasuje, e rdiov zariadenia typu poda hore uvedench modelov s v slade so smernicou 2014/53/E. pln vyhlsenie E o zhode je k dispozcii na tejto internetovej adrese: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_SK_55/62 Frekvenn rozsah: 470 MHz a 694 MHz Maximlny RF vkon: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_SK_56/62 Za stranke v Evropi Podjetje Sony Corporation potrjuje, da so zgoraj navedeni tipi radijske opreme skladni z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_SI_57/62 Frekvenni obseg: od 470 MHz do 694 MHz Najveja izhodna mo RF: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_SI_58/62 Za korisnike u Europi Sony Corporation ovime izjavljuje da je radijska oprema gore navedenih modela u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_HR_59/62 Raspon frekvencije: 470 MHz do 694 MHz Maksimalna izlazna snaga radijske frekvencije: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_HR_60/62 Za kupce u Evropi Ovim, kompanija Sony Corporation izjavljuje da su gorenavedeni tipovi radio opreme usaglaeni sa direktivom 2014/53/EU. Pun tekst Izjave o usaglaenosti za EU je dostupan na sledeoj internet adresi: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_SR_61/62 Frekventni opseg: od 470 MHz do 694 MHz Maksimalna izlazna snaga RF emisije: 30 mW For the URX-P40 Receivers R-93_v009-000_5-009-936-01(1)_201907101714_SR_62/62 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. S-1_v007-000_5-009-936-01(1)_201907101718_GB_1/37 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country. S-4_v005-000_5-009-936-01(1)_201907101718_GB_2/37 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery or the product, you must obey the law in the corresponding area or country. Do not dispose of the battery or the product in a fire or a hot oven, or mechanically crush or cut the battery. It may explode or cause a fire. Do not subject the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not place the battery in a high temperature place, such as under direct sunlight or near fire. It may ignite, explode, or cause a fire. Do not immerse or wet the battery in water or seawater. This may cause an electric shock. S-4D_v003-000_5-009-936-01(1)_201907101718_GB_3/37 This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. S-14_v006-000_5-009-936-01(1)_201907101718_GB_4/37 CAUTION Danger of explosion if battery is incorrectly replaced. When the internal battery needs to be replaced, please contact a qualified service person. Danger of fire or explosion. When you dispose of the battery or the product, you must obey the law in the relative area or country. Do not dispose of the battery or the product into a fire or a hot oven, or mechanically crush or cut the battery. Danger of fire, explosion or electric shock. Avoid operating or storing the product in the following locations. Extremely hot or cold places (for operating temperature, see R-93_v009-000_5-009-936-01(1)_201907101714_GR_38/62 Installation Manual.) Sony Corporation ,

- 2014/53/

.

: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_BG_39/62

: 470 694

: 30 R-93_v009-000_5-009-936-01(1)_201907101714_BG_40/62 Pro zkaznky v Evrop Sony Corporation tmto prohlauje, e typ rdiovho zazen ve uvedench model je v souladu se smrnic 2014/53/EU. pln znn EU-prohlen o shod je k dispozici na tto internetov adrese: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_CZ_41/62 Frekvenn rozsah: 470 MHz a 694 MHz Maximln vyzen vkon na rdiov frekvenci: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_CZ_42/62 Pentru clienii din Europa Prin prezenta, Sony Corporation declar c tipul de echipament radio al modelelor de mai sus este n conformitate cu Directiva 2014/53/

UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_RO_43/62 Gama de frecven: de la 470 MHz pn la 694 MHz Tensiunea de ieire maxim RF: 30 mW Locations where corrosive gas or flammable gas is emitted, or where salt damage may occur. S-78_v006-000_5-009-936-01(1)_201907101718_GB_5/37 ATTENTION The electromagnetic fields at the specific frequencies may influence the sound of this unit. E-24B_v010-000_5-009-936-01(1)_201907101718_GB_6/37 All interface cables used to connect the equipment to peripherals must be shielded type to comply with EMC standard(s) and to prevent undesired operation due to radiated emissions. When cables are supplied, always use them for this purpose. E-8_v008-000_5-009-936-01(1)_201907101718_GB_7/37 For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that R-93_v009-000_5-009-936-01(1)_201907101714_RO_44/62 to which the receiver is connected. Klientidele Euroopas Kesolevaga deklareerib Sony Corporation, et eelpool nimetatud mudelite raadioseadmete tbid vastavad direktiivi 2014/53/EL nuetele. Eli vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_EE_45/62 Sagedusvahemik: 470 MHz kuni 694 MHz Maksimaalne raadiosageduslik vljundvimsus: 30 mW Consult the dealer or an experienced radio/TV technician for help. E-6_v003-000_5-009-936-01(1)_201907101718_GB_8/37 You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. E-7_v002-000_5-009-936-01(1)_201907101718_GB_9/37 If you have any questions about this product, you may call:

Sony Customer Information Service Center 1-800-222-7669 or http://

www.sony.com/

R-93_v009-000_5-009-936-01(1)_201907101714_EE_46/62 Suppliers Declaration of Conformity Eurpai gyfeleinknek A Sony Corporation igazolja, hogy a fenti tpus rdiberendezs-

modellek megfelelnek a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_HU_47/62 Frekvenciatartomny: 470 MHz 694 MHz Max. nagyfrekvencis kimeneti teljestmny: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_HU_48/62 Klientiem Eirop Ar o Sony Corporation deklar, ka augstk minto modeu radioiekrtas tips atbilst direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_LV_49/62 Frekvenu diapazons: no 470 MHz ldz 694 MHz Maksiml RF izejas jauda: 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_LV_50/62 Europos klientams Mes, Sony Corporation, patvirtiname, kad aukiau ivardint modeli radijo rengini tipai atitinka direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas pasiekiamas iuo internetiniu adresu: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_LT_51/62 Dani intervalas: nuo 470 MHz iki 694 MHz Trade Name Model

: SONY

: URX-P40 Responsible party

: Sony Electronics Inc. Address

: 16535 Via Esprillo, San Diego, CA Telephone Number 92127 U.S.A.

: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. E-10A_v002-000_5-009-936-01(1)_201907101718_GB_10/37 All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules. R-4_v002-000_5-009-936-01(1)_201907101718_GB_11/37 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules. R-4_v002-000_5-009-936-01(1)_201907101718_GB_11/37 E-10A_v002-000_5-009-936-01(1)_201907101718_GB_10/37 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate(SAR). R-60_v004-000_5-009-936-01(1)_201907101718_GB_12/37 In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. R-78_v001-000_5-009-936-01(1)_201907101718_GB_13/37 For the customers in Canada CAN ICES-3 (B)/NMB-3(B) E-13_v002-000_5-009-936-01(1)_201907101718_GB_14/37 For the customers in Canada This device complies with Industry Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. R-10_v004-000_5-009-936-01(1)_201907101718_GB_15/37 The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met. R-12_v002-000_5-009-936-01(1)_201907101718_GB_16/37 This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canadas document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-

Exempt Low-Power Radio Apparatus in the TV Bands. W-13_v004-000_5-009-936-01(1)_201907101718_GB_17/37 For the customers in Europe Hereby, Sony Corporation declares that the radio equipment types listed above are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_GB_18/37 Voor klanten in Europa Hierbij verklaart Sony Corporation dat de bovenstaande radioapparatuurmodellen conform zijn met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: http://www.compliance. sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_NL_19/37 Fr kunder i Europa Hrmed frskrar Sony Corporation att de ovanstende modellernas typ av radioutrustning verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_SE_20/37 Para clientes na Europa O(a) abaixo assinado(a), Sony Corporation, declara que o presente tipo de equipamento dos modelos supracitados est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_PT_21/37 For kunder i Europa Hermed erklrer Sony Corporation, at radioudstyrstypen for modellerne ovenfor er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_DK_22/37 Asiakkaille Euroopassa Sony Corporation vakuuttaa, ett edell mainittujen mallien radiolaitetyyppi on direktiivin 2014/53/EU mukainen. EU-

vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_FI_23/37 For kunder i Europa Sony Corporation erklrer herved at modellene over er av en radioutstyrstype som er i samsvar med direktiv 2014/53/EU. Den komplette EU-samsvarserklringen finner du p flgende internettadresse: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_NO_24/37 Sony Corporation , 2014/53/

.

: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_GR_25/37 Sony Corporation ,

- 2014/53/

.

: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_BG_26/37 Pro zkaznky v Evrop Sony Corporation tmto prohlauje, e typ rdiovho zazen ve uvedench model je v souladu se smrnic 2014/53/EU. pln znn EU-prohlen o shod je k dispozici na tto internetov adrese: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_CZ_27/37 Pentru clienii din Europa Prin prezenta, Sony Corporation declar c tipul de echipament radio al modelelor de mai sus este n conformitate cu Directiva 2014/53/

UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_RO_28/37 Klientidele Euroopas Kesolevaga deklareerib Sony Corporation, et eelpool nimetatud mudelite raadioseadmete tbid vastavad direktiivi 2014/53/EL nuetele. Eli vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_EE_29/37 Eurpai gyfeleinknek A Sony Corporation igazolja, hogy a fenti tpus rdiberendezs-

modellek megfelelnek a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_HU_30/37 Klientiem Eirop Ar o Sony Corporation deklar, ka augstk minto modeu radioiekrtas tips atbilst direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn: http://www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_LV_31/37 Europos klientams Mes, Sony Corporation, patvirtiname, kad aukiau ivardint modeli radijo rengini tipai atitinka direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas pasiekiamas iuo internetiniu adresu: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_LT_32/37 Dla klientw w Europie Sony Corporation niniejszym owiadcza, e powysze modele urzdze s zgodne z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: http://www. compliance.sony.eu Pre zkaznkov v Eurpe Sony Corporation tmto vyhlasuje, e rdiov zariadenia typu poda hore uvedench modelov s v slade so smernicou 2014/53/E. pln vyhlsenie E o zhode je k dispozcii na tejto internetovej adrese: http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_PL_33/37 R-19B_v006-000_5-009-936-01(1)_201907101718_SK_34/37 Za stranke v Evropi Podjetje Sony Corporation potrjuje, da so zgoraj navedeni tipi radijske opreme skladni z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_SI_35/37 Za korisnike u Europi Sony Corporation ovime izjavljuje da je radijska oprema gore navedenih modela u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_HR_36/37 Za kupce u Evropi Ovim, kompanija Sony Corporation izjavljuje da su gorenavedeni tipovi radio opreme usaglaeni sa direktivom 2014/53/EU. Pun tekst Izjave o usaglaenosti za EU je dostupan na sledeoj internet adresi: http://www. compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_SR_37/37 For the customers in the U.S.A. SONY LIMITED WARRANTY - Please visit http://www.sony.com/psa/warranty for important information and complete terms and conditions of Sonys limited warranty applicable to this product. For the customers in Canada SONY LIMITED WARRANTY - Please visit http://www.sonybiz.ca/pro/lang/en/

ca/article/resources-warranty for important information and complete terms and conditions of Sonys limited warranty applicable to this product. For the customers in Europe Sony Professional Solutions Europe - Standard Warranty and Exceptions on Standard Warranty. Please visit http://www.pro.sony.eu/warranty for important information and complete terms and conditions. For the customers in Korea SONY LIMITED WARRANTY - Please visit http://bpeng.sony.co.kr/handler/

BPAS-Start for important information and complete terms and conditions of Sonys limited warranty applicable to this product. Using the CD-ROM manual The manual can be read on a computer with Adobe Reader installed. You can download Adobe Reader free from the Adobe website. 1 Open the index.html file in the CD-ROM. 2 Select and click on the manual that you want to read. Note If you have lost or damaged the CD-ROM, you can purchase a new one from your Sony dealer or Sony service counter. Specifications Design and specifications are subject to change without notice. Transmitter (UTX-B40/M40/P40) Items common to all transmitters Oscillator type Carrier frequencies Crystal-controlled PLL synthesizer 14UC model: 470.125 MHz to 541.875 MHz (UHF-TV channels 14 to 25) 25UC model: 536.125 MHz to 607.875 MHz (UHF-TV channels 25 to 36) 90U model: 941.625 MHz to 951.875 MHz, 953.000 MHz to 956.125 MHz, and 956.625 MHz to 959.625 MHz 21CE model: 470.025 MHz to 542.000 MHz (UHF-TV channels 21 to 29) 33CE model: 566.025 MHz to 630.000 MHz (UHF-TV channels 33 to 40) 42CE model: 638.025 MHz to 694.000 MHz (UHF-TV channels 42 to 48) 42LA model: 638.125 MHz to 697.875 MHz (UHF-TV channels 42 to 51) 38CN model: 710.025 MHz to 782.000 MHz (UHF-

TV channels 38 to 46) KR model: 925.125 MHz to 937.500 MHz E model: 794.125 MHz to 805.875 MHz 50 s Preemphasis Reference frequency deviation Distortion Signal-to-noise ratio Audio delay Tone signal frequency Supply voltage NFC function IR SYNC function USB port Operating temperature Storage temperature Note When used in locations with an ambient temperature of 45C (113F) or higher, make sure the unit does not come into direct contact with your skin, as it may cause burns due to high temperature. 5 kHz (60 dBV, 1 kHz input) 0.9% or less (60 dBV, 1 kHz input) 60 dB (60 dBV, 1 kHz input) 102 dB (GAIN MODE set to AUTO GAIN, max.) 96 dB (GAIN MODE set to NORMAL, max.) Approx. 0.35ms In UWP-D compander mode: 32.382 kHz In UWP compander mode: 32 kHz In WL800 compander mode: 32.768 kHz DC 3.0 V (two LR6/AA size alkaline batteries) DC 5.0 V (supplied from USB connector) Built-in Built-in Type C 0 C to 50 C (32 F to 122 F) 20 C to +55 C (4 F to +131 F) Frequency range 13.56 MHz (NFC) Maximum RF power output

< 42 dBA/m (10 m) Body-pack transmitter (UTX-B40) Antenna Audio input connector Reference audio input level 60 dBV (MIC input, GAIN MODE set to NORMAL, 1/4 wavelength wire antenna 3.5 mm diameter 3-pole locking mini jack 0dB attenuation)

+4 dBu (LINE input) 30 mW/5 mW selectable (UC, U, CE, LA, CN models) 10 mW/2 mW selectable (E, KR models) 23 Hz to 18 kHz (Typical) 0 dB to 27 dB (3 dB steps) POWER, AUDIO/MUTE RF output level Frequency response Attenuation Indicators Battery life (measured with two Sony LR6/AA size alkaline batteries at 25C

(77F), DISPLAY MODE set to AUTO OFF) Approx. 8 hours with output power of 30 mW Dimensions

(UC, U, CE, LA, CN models) Approx. 10 hours with output power of 10 mW

(E, KR models) 63 73 19 mm (2 1/2 2 7/8 3/4 in.)

(width / height / depth) (excluding antenna)

(Figure ) Approx. 83 g (2.9 oz) (excluding batteries) Mass Lavalier microphone (ECM-V1BMP) Type Frequency response Directivity Sensitivity Operating temperature Storage temperature Cable Electret condenser microphone 40 Hz to 20,000 Hz Omni-directional 43.0 dB 3 dB (0 dB = 1 V/Pa, at 1 kHz) 0 C to 50 C (32 F to 122 F) 20 C to +55 C (4 F to +131 F) 2.3 mm diameter, 2-conductor shielded cable, Dimensions 1.2m (3.9 feet) long 6.8 19.5 mm (9/32 25/32 in.) (without cable and connector) Approx. 16.2 g (0.57 oz) Mass Hand-held microphone (UTX-M40) Microphone unit Directivity Antenna Reference audio input level 55 dBV (GAIN MODE set to NORMAL, 0 dB Dynamic Unidirectional 1/4 wavelength wire antenna Maximum audio input level 151 dB SPL (21 dB attenuation, using supplied microphone unit) attenuation) RF output level Frequency response Attenuation Indicator Battery life (measured with two Sony LR6/AA size alkaline batteries at 25C

(77F), DISPLAY MODE set to AUTO OFF) 30 mW/5 mW selectable (UC, U, CE, LA, CN models) 10 mW/2 mW selectable (E, KR models) 70 Hz to 18 kHz (Typical) 0 dB to 21 dB (3 dB steps) POWER/MUTE Approx. 8 hours with output power of 30 mW Dimensions

(UC, U, CE, LA, CN models) Approx. 10 hours with output power of 10 mW

(E, KR models) 48 258 mm (1 15/16 10 1/4 in.) (diameter / length)

(Figure ) Mass Plug-on transmitter (UTX-P40) Reference audio input level 60 dBV (MIC input, GAIN MODE set to NORMAL, Approx. 255 g (9.0 oz) (excluding batteries) 0dB attenuation) 40 mW/5 mW selectable (UC, U, LA models) 30 mW/5 mW selectable (CE, CN models) 10 mW/2 mW selectable (E, KR models) 23 Hz to 18 kHz (Typical) 0 dB to 48 dB (3 dB steps) XLR-3-11C type (female) POWER, AUDIO/MUTE, +48V RF output level Frequency response Attenuation Audio input connector Indicators Battery life (measured with two Sony LR6/AA size alkaline batteries at 25C

(77F), DISPLAY MODE set to AUTO OFF) During +48V OFF:

Approx. 7 hours with output power of 40 mW (UC, U, LA models) Approx. 8 hours with output power of 30 mW

(CE, CN models) Approx. 10 hours with output power of 10 mW

(E, KR models) During +48V ON and ECM-673 connection:

Approx. 6 hours with output power of 40 mW

(UC, U, LA models) Approx. 6 hours with output power of 30 mW UWP-D21/D22/D26_UTX-B40/M40/P40_URX-P40 flyer 5-009-936-01 (1) Este produto atende aos limites da Taxa de Absoro Especfica para exposio a campos eltricos, magnticos e eletromagnticos conforme Resolues ANATEL No 303/2002 e No 533/2009. A B C D 3 7 63 19 8 9 7 7 8 3 38 0 7 63 31 Dimensions Mass Tuner

(CE, CN models) Approx. 7 hours with output power of 10 mW

(E, KR models) 38 98 38 mm (1 1/2 3 7/8 1 1/2 in.)

(width / height / depth) (including the audio input connector) (Figure ) Approx. 139 g (4.9 oz) (excluding batteries) Portable diversity tuner (URX-P40) Antenna Audio output level 1/4 wavelength wire antenna (angle-adjustable) 60 dBV (3.5 mm diameter 3-pole locking mini jack, analog output , 0 dB audio output level) 20 dBFS (external connection, digital output , 0dB audio output level) 50 dBFS (external connection, analog output , 0dB audio output level) Audio output level variation range Audio output connector 12 dB to +12 dB (3 dB steps) 3.5 mm diameter 3-pole locking mini jack, external connection 10 mW max. (16-ohm) Headphone output level Headphone output connector Reception method Local oscillator Receive frequencies 3.5 mm diameter mini jack True diversity method Crystal-controlled PLL synthesizer 14UC model: 470.125 MHz to 541.875 MHz (UHF-

TV channels 14 to 25) 25UC model: 536.125 MHz to 607.875 MHz (UHF-

TV channels 25 to 36) 90U model: 941.625 MHz to 951.875 MHz, 953.000 MHz to 956.125 MHz, and 956.625 MHz to 959.625 MHz 21CE model: 470.025 MHz to 542.000 MHz (UHF-TV channels 21 to 29) 33CE model: 566.025 MHz to 630.000 MHz (UHF-TV channels 33 to 40) 42CE model: 638.025 MHz to 694.000 MHz (UHF-TV channels 42 to 48) 42LA model: 638.125 MHz to 697.875 MHz (UHF-TV channels 42 to 51) 38CN model: 710.025 MHz to 782.000 MHz (UHF-

TV channels 38 to 46) KR model: 925.125 MHz to 937.500 MHz E model: 794.125 MHz to 805.875 MHz 60 dB (1 kHz sine wave, 5 kHz modulation) Approx. 0.35 ms (analog output) Approx. 0.24 ms (digital output) 50 s Signal-to-noise ratio Audio delay Deemphasis Reference frequency deviation Frequency response Distortion Tone signal frequency Indicators Operating temperature Storage temperature Note When used in locations with an ambient temperature of 45 C (113 F) or higher, make sure the unit does not come into direct contact with your skin, as it may cause burns due to high temperature. 5 kHz 23 Hz to 18 kHz (Typical) 0.9% or less (1 kHz sine wave, 5 kHz modulation) In UWP-D compander mode: 32.382 kHz In UWP compander mode: 32 kHz In WL800 compander mode: 32.768 kHz POWER, RF 0 C to 50 C (32 F to 122 F) 20 C to +55 C (4 F to +131 F) NFC function USB port Supply voltage Battery life Dimensions Mass Built-in Type C DC 3.0 V (two LR6/AA size alkaline batteries) DC 5.0 V (supplied from USB connector) Approx. 6 hours (measured with two Sony LR6/AA size alkaline batteries at 25 C (77 F), DISPLAY MODE set to AUTO OFF) 63 70 31 mm (2 1/2 2 7/8 1 1/4 in.)

(width / height / depth) (excluding antenna)

(Figure ) Approx. 131 g (4.6 oz) (excluding batteries) ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lors de la mise au rebut de la batterie ou du produit, vous devez respecter la loi de la rgion ou du pays concern. Ne mettez pas la batterie ou le produit au rebut dans un feu ou un four chaud, ou ncrasez pas mcaniquement la batterie et ne la coupez pas. Elle risque dexploser ou de provoquer un incendie. Ne soumettez pas la batterie une pression dair extrmement basse qui pourrait entraner une explosion ou une fuite de liquide ou de gaz inflammable. Ne placez pas la batterie dans un endroit temprature leve, tel qu la lumire directe du soleil ou proximit dun feu. Elle risque de prendre feu, dexploser ou de provoquer un incendie. Ne plongez pas et ne mouillez pas la batterie dans de leau douce ou de leau de mer. Cela risque de provoquer une lectrocution. S-4D_v003-000_5-009-936-01(1)_201907101718_FR_3/12 Le symbole avertit lutilisateur de la prsence dimportantes instructions concernant le fonctionnement et la maintenance (entretien) dans la documentation qui accompagne lappareil. S-14_v006-000_5-009-936-01(1)_201907101718_FR_4/12 ATTENTION Il y a un danger dexplosion si la batterie nest pas remplace correctement. Lorsquune batterie interne doit tre remplace, veuillez contacter un technicien qualifi. Il y a un danger dexplosion. Lors de la mise au rebut de la batterie ou du produit, vous devez respecter la loi de la rgion ou du pays correspondant. Ne mettez pas la batterie ou le produit au rebut dans un feu ou un four chaud, ou ncrasez pas mcaniquement la batterie et ne la coupez pas. Il y a un danger dincendie, dexplosion ou dlectrocution. vitez de faire fonctionner ou de stocker le produit dans les endroits suivants :

Endroits extrmement chauds ou froids (pour la temprature de fonctionnement, consultez le Manuel dinstallation.) Endroits o des missions de gaz corrosifs ou inflammables se produisent ou bien des endroits exposs du sel. S-78_v006-000_5-009-936-01(1)_201907101718_FR_5/12 ATTENTION Il est possible que des champs lectromagntiques des frquences spcifiques influencent le son de cet appareil. E-24B_v010-000_5-009-936-01(1)_201907101718_FR_6/12 Tous les cbles dinterface permettant de raccorder lquipement aux priphriques doivent tre de type blind afin de respecter la(les) directive(s) CEM et empcher une opration non dsire d aux missions rayonnes. Quand les cbles sont fournis, utilisez-les toujours cet effet. E-8_v008-000_5-009-936-01(1)_201907101718_FR_7/12 Pour les clients au Canada CAN ICES-3 (B)/NMB-3(B) E-13_v002-000_5-009-936-01(1)_201907101718_FR_8/12 Pour les clients au Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1)

(2) lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. R-10_v004-000_5-009-936-01(1)_201907101718_FR_9/12 La mention IC: devant le numro de certification/ homologation signifie uniquement que les spcifications techniques dIndustrie Canada sont remplies. R-12_v002-000_5-009-936-01(1)_201907101718_FR_10/12 Ce dispositif fonctionne selon un rgime de non-brouillage et de non-protection. Si lutilisateur devait chercher obtenir une certaine protection contre dautres services radio fonctionnant dans les mmes bandes de tlvision, une licence radio serait requise. Pour plus de dtails, consultez la Circulaire des procdures concernant les clients CPC-2-1-28 dInnovation, Sciences et Dveloppement conomique Canada intitule Dlivrance de licences sur une base volontaire pour les appareils radio de faible puissance exempts de licence et exploits dans les bandes de tlvision. W-13_v004-000_5-009-936-01(1)_201907101718_FR_11/12 Pour les clients en Europe Le soussign, Sony Corporation, dclare que les types dquipements radiolectriques faisant partie des modles sus-rfrencs sont conformes la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante : http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101718_FR_12/12 Pour les clients au Canada GARANTIE LIMITE DE SONY - Rendez-vous sur http://www.sonybiz.ca/

pro/lang/en/ca/article/resources-warranty pour obtenir les informations importantes et lensemble des termes et conditions de la garantie limite de Sony applicable ce produit. Utilisation du manuel sur CD-ROM Vous devez installer Adobe Reader sur votre ordinateur pour pouvoir lire ce manuel. Vous pouvez tlcharger Adobe Reader gratuitement depuis le site Web dAdobe. 1 Ouvrez le fichier index.html situ sur le CD-ROM. 2 Slectionnez le manuel que vous souhaitez lire, puis cliquez sur ce dernier. Remarque Si vous avez perdu ou endommag le CD-ROM, vous pouvez acheter un CD-ROM de remplacement auprs de votre reprsentant Sony ou du service clientle Sony. Spcifications La conception et les spcifications sont sujettes des modifications sans pravis. Emetteur (UTX-B40/M40/P40) Elments communs tous les metteurs Type doscillateur Frquences porteuses Synthtiseur PLL pilot par quartz Modle 14UC: 470,125 MHz 541,875 MHz

(canaux UHF-TV 14 25) Modle 25UC: 536,125 MHz 607,875 MHz

(canaux UHF-TV 25 36) Modle 90U: 941,625 MHz 951,875 MHz, 953,000 MHz 956,125 MHz, et 956,625 MHz 959,625 MHz Modle 21CE: 470,025 MHz 542,000 MHz (canaux UHF-TV 21 29) Modle 33CE: 566,025 MHz 630,000 MHz (canaux UHF-TV 33 40) Modle 42CE: 638,025 MHz 694,000 MHz (canaux UHF-TV 42 48) Modle 42LA: 638,125 MHz 697,875 MHz (canaux UHF-TV 42 51) Modle 38CN: 710,025 MHz 782,000 MHz

(canaux UHF-TV 38 46) Praccentuation Ecart de frquence de rfrence Distorsion Rapport signal/bruit Dlai audio Frquence du signal de tonalit Modle KR: 925,125 MHz 937,500 MHz Modle E: 794,125 MHz 805,875 MHz 50 s 5 kHz (60 dBV, entre 1 kHz) 0,9% ou moins (60 dBV, entre 1 kHz) 60 dB (60 dBV, entre 1 kHz) 102 dB (GAIN MODE rgl sur AUTO GAIN, max.) 96 dB (GAIN MODE rgl sur NORMAL, max.) Approx. 0,35ms En mode compression-expansion UWP-D :

32,382kHz En mode compression-expansion UWP: 32 kHz En mode compression-expansion WL800 :

32,768kHz 3,0 V CC (deux batteries format LR6/AA) 5,0 V CC (fournie par le connecteur USB) Intgre Intgre Type C Tension dalimentation Fonction NFC Fonction IR SYNC Port USB Temprature de fonctionnement Temprature de stockage Remarque En cas dutilisation dans des endroits o la temprature ambiante est de 45C

(113F) ou plus, assurez-vous que lappareil nentre pas en contact direct avec votre peau, car cela pourrait provoquer des brlures dues une temprature leve. 0 C 50 C (32 F 122 F) 20 C +55 C (4 F +131 F) Plage de frquences Puissance de sortie RF maximale 13,56 MHz (NFC)

< 42 dBA/m (10 m) Emetteur de poche (UTX-B40) Antenne Connecteur dentre audio Mini prise de verrouillage 3-ples de 3,5 mm de Antenne de fil longueur donde 1/4 diamtre, connexion externe Frequency range 13.56 MHz (NFC) Franais Maximum RF power output

< 42 dBA/m (10 m) Avant dutiliser lappareil, veuillez lire attentivement ce manuel et le conserver pour future rfrence. Le modle U90 peut uniquement tre utilis aux tats-Unis. Lutilisation des metteurs U90 ncessite une licence et est sujette des restrictions sur la slection de frquence et lespacement des canaux. Pour les metteurs UTX-B40/M40/P40 AVERTISSEMENT Afin de rduire les risques dincendie ou dlectrocution, ne pas exposer cet appareil la pluie ou lhumidit. Afin dcarter tout risque dlectrocution, garder le coffret ferm. Ne confier lentretien de lappareil qu un personnel qualifi. S-1_v007-000_5-009-936-01(1)_201907101714_FR_1/15 ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lorsque vous mettez la batterie au rebut, vous devez respecter la lgislation en vigueur dans le pays ou la rgion o vous vous trouvez. S-4_v005-000_5-009-936-01(1)_201907101714_FR_2/15 ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lors de la mise au rebut de la batterie ou du produit, vous devez respecter la loi de la rgion ou du pays concern. Ne mettez pas la batterie ou le produit au rebut dans un feu ou un four chaud, ou ncrasez pas mcaniquement la batterie et ne la coupez pas. Elle risque dexploser ou de provoquer un incendie. Ne soumettez pas la batterie une pression dair extrmement basse qui pourrait entraner une explosion ou une fuite de liquide ou de gaz inflammable. Ne placez pas la batterie dans un endroit temprature leve, tel qu la lumire directe du soleil ou proximit dun feu. Elle risque de prendre feu, dexploser ou de provoquer un incendie. Ne plongez pas et ne mouillez pas la batterie dans de leau douce ou de leau de mer. Cela risque de provoquer une lectrocution. S-4D_v003-000_5-009-936-01(1)_201907101714_FR_3/15 Le symbole avertit lutilisateur de la prsence dimportantes instructions concernant le fonctionnement et la maintenance (entretien) dans la documentation qui accompagne lappareil. S-14_v006-000_5-009-936-01(1)_201907101714_FR_4/15 ATTENTION Il y a un danger dexplosion si la batterie nest pas remplace correctement. Lorsquune batterie interne doit tre remplace, veuillez contacter un technicien qualifi. Il y a un danger dexplosion. Lors de la mise au rebut de la batterie ou du produit, vous devez respecter la loi de la rgion ou du pays correspondant. Ne mettez pas la batterie ou le produit au rebut dans un feu ou un four chaud, ou ncrasez pas mcaniquement la batterie et ne la coupez pas. Il y a un danger dincendie, dexplosion ou dlectrocution. vitez de faire fonctionner ou de stocker le produit dans les endroits suivants :

Endroits extrmement chauds ou froids (pour la temprature de fonctionnement, consultez le Manuel dinstallation.) Endroits o des missions de gaz corrosifs ou inflammables se produisent ou bien des endroits exposs du sel. S-78_v006-000_5-009-936-01(1)_201907101714_FR_5/15 ATTENTION Il est possible que des champs lectromagntiques des frquences spcifiques influencent le son de cet appareil. E-24B_v010-000_5-009-936-01(1)_201907101714_FR_6/15 Tous les cbles dinterface permettant de raccorder lquipement aux priphriques doivent tre de type blind afin de respecter la(les) directive(s) CEM et empcher une opration non dsire d aux missions rayonnes. Quand les cbles sont fournis, utilisez-les toujours cet effet. E-8_v008-000_5-009-936-01(1)_201907101714_FR_7/15 Pour les clients au Canada CAN ICES-3 (B)/NMB-3(B) E-13_v002-000_5-009-936-01(1)_201907101714_FR_8/15 Pour les clients au Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1)

(2) lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. R-10_v004-000_5-009-936-01(1)_201907101714_FR_9/15 Exposition humaine aux champs de radiofrquences

(Industrie Canada) Linstallateur de ce matriel radio doit sassurer que lantenne est situe ou oriente de telle manire ne pas mettre un champ de radiofrquence dpassant les limites spcifies par Sant Canada pour la population gnrale ; consultez le Code de scurit 6, disponible sur le site Web de Sant Canada : http://www.hc-sc.gc.ca/index-eng.php R-11_v002-000_5-009-936-01(1)_201907101714_FR_10/15 La mention IC: devant le numro de certification/ homologation signifie uniquement que les spcifications techniques dIndustrie Canada sont remplies. R-12_v002-000_5-009-936-01(1)_201907101714_FR_11/15 Les connaissances scientifiques dont nous disposons nont mis en vidence aucun problme de sant associ lusage des appareils sans fil faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil faible puissance sont entirement sans danger. Les appareils sans fil faible puissance mettent une nergie frquence radiolectrique (RF) trs faible dans le spectre des micro-ondes lorsquils sont utiliss. Alors quune dose leve de RF peut avoir des effets sur la sant (en chauffant les tissus), lexposition de faibles RF qui ne produisent pas de chaleur na pas de mauvais effets connus sur la sant. De nombreuses tudes ont t menes sur les expositions aux RF faibles et nont dcouvert aucun effet biologique. Certaines tudes ont suggr quil pouvait y avoir certains effets biologiques, mais ces rsultats nont pas t confirms par des recherches supplmentaires. UTX-B40/UTX-M40/UTX-P40 a t test et jug conforme aux limites dexposition aux rayonnements IC nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. R-67_v002-000_5-009-936-01(1)_201907101714_FR_12/15 Ce dispositif fonctionne selon un rgime de non-brouillage et de non-protection. Si lutilisateur devait chercher obtenir une certaine protection contre dautres services radio fonctionnant dans les mmes bandes de tlvision, une licence radio serait requise. Pour plus de dtails, consultez la Circulaire des procdures concernant les clients CPC-2-1-28 dInnovation, Sciences et Dveloppement conomique Canada intitule Dlivrance de licences sur une base volontaire pour les appareils radio de faible puissance exempts de licence et exploits dans les bandes de tlvision. W-13_v004-000_5-009-936-01(1)_201907101714_FR_13/15 Pour les clients en Europe Le soussign, Sony Corporation, dclare que les types dquipements radiolectriques faisant partie des modles sus-rfrencs sont conformes la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante : http://

www.compliance.sony.eu R-19B_v006-000_5-009-936-01(1)_201907101714_FR_14/15 Plage de frquences : 470 MHz 694 MHz Puissance de sortie RF maximale : 30 mW R-93_v009-000_5-009-936-01(1)_201907101714_FR_15/15 Pour les rcepteurs URX-P40 AVERTISSEMENT Afin de rduire les risques dincendie ou dlectrocution, ne pas exposer cet appareil la pluie ou lhumidit. Afin dcarter tout risque dlectrocution, garder le coffret ferm. Ne confier lentretien de lappareil qu un personnel qualifi. S-1_v007-000_5-009-936-01(1)_201907101718_FR_1/12 ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lorsque vous mettez la batterie au rebut, vous devez respecter la lgislation en vigueur dans le pays ou la rgion o vous vous trouvez. S-4_v005-000_5-009-936-01(1)_201907101718_FR_2/12 ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lors de la mise au rebut de la batterie ou du produit, vous devez respecter la loi de la rgion ou du pays concern. Ne mettez pas la batterie ou le produit au rebut dans un feu ou un four chaud, ou ncrasez pas mcaniquement la batterie et ne la coupez pas. Elle risque dexploser ou de provoquer un incendie. Ne soumettez pas la batterie une pression dair extrmement basse qui pourrait entraner une explosion ou une fuite de liquide ou de gaz inflammable. Ne placez pas la batterie dans un endroit temprature leve, tel qu la lumire directe du soleil ou proximit dun feu. Elle risque de prendre feu, dexploser ou de provoquer un incendie. Ne plongez Niveau dentre audio de rfrence 60 dBV (entre MIC, GAIN MODE rgl sur NORMAL, attnuation 0 dB) Niveau de sortie RF

+4 dBu (Entre LINE) 30 mW/5 mW slectionnable (modles UC, U, CE, LA et CN) Rponse de frquence Attnuation Indicateurs Dure de vie des batteries (mesure avec deux batteries alcalines Sony format LR6/AA 25 C (77 F), DISPLAY MODE rgl sur AUTO OFF) 10 mW/2 mW slectionnable (modles E et KR) 23 Hz 18 kHz (Typique) 0 dB 27 dB (tapes de 3 dB) POWER, AUDIO/MUTE Approx. 8 heures avec alimentation de sortie de Dimensions 30mW (modles UC, U, CE, LA et CN) Approx. 10 heures avec alimentation de sortie de 10mW (modles E et KR) 63 73 19mm (2 1/2 2 7/8 3/4 po)

(largeur / hauteur / profondeur) ( lexception de lantenne) (Figure ) Approx. 83 g (2,9 on) ( lexception des batteries) Poids Micro-cravate (ECM-V1BMP) Type Rponse de frquence Directivit Sensibilit Temprature de fonctionnement Temprature de stockage Cble Microphone condensateur lectret 40 Hz 20000 Hz Omnidirectionnelle 43,0 dB 3 dB (0 dB = 1 V/Pa, 1 kHz) 0 C 50 C (32 F 122 F) 20 C +55 C (4 F +131 F) 2,3 mm de diamtre, cble blind 2conducteurs, Dimensions 1,2 m (3,9 pieds) de long 6,8 19,5mm (9/32 25/32 po) (sans cble ni connecteur) Approx. 16,2 g (0,57 on) Poids Microphone portatif (UTX-M40) Dynamique Microphone Directivit Unidirectionnelle Antenne Antenne de fil longueur donde 1/4 Niveau dentre audio de rfrence 55 dBV (GAIN MODE rgl sur NORMAL, attnuation 0dB) Niveau dentre audio maximal 151 dB SPL (attnuation de 21 dB, utilisation de lunit microphone) Niveau de sortie RF 30 mW/5 mW slectionnable (modles UC, U, CE, LA et CN) Rponse de frquence Attnuation Indicateur Dure de vie des batteries (mesure avec deux batteries alcalines Sony format LR6/AA 25 C (77 F), DISPLAY MODE rgl sur AUTO OFF) 10 mW/2 mW slectionnable (modles E et KR) 70 Hz 18 kHz (Typique) 0 dB 21 dB (tapes de 3 dB) POWER/MUTE Approx. 8 heures avec alimentation de sortie de Dimensions 30mW (modles UC, U, CE, LA et CN) Approx. 10 heures avec alimentation de sortie de 10 mW (modles E et KR) 48 258mm (1 15/16 10 1/4 po) (diamtre /

longueur)(Figure ) Approx. 255 g (9,0 on) ( lexception des batteries) Poids Emetteur enfichable (UTX-P40) Niveau dentre audio de rfrence 60 dBV (entre MIC, GAIN MODE rgl sur NORMAL, attnuation 0 dB) 40 mW/5 mW slectionnable (modles UC, U et LA) 30 mW/5 mW slectionnable (modles CE et CN) 10 mW/2 mW slectionnable (modles E et KR) 23 Hz 18 kHz (Typique) 0 dB 48 dB (tapes de 3 dB) Type XLR-3-11C (femelle) POWER, AUDIO/MUTE, +48V Niveau de sortie RF Rponse de frquence Attnuation Connecteur dentre audio Indicateurs Dure de vie des batteries (mesure avec deux batteries alcalines Sony format LR6/AA 25 C (77 F), DISPLAY MODE rgl sur AUTO OFF) Lorsque +48V est OFF :

Approx. 7 heures avec alimentation de sortie de Dimensions Poids Tuner 40mW (modles UC, U et LA) Approx. 8 heures avec alimentation de sortie de 30mW (modles CE et CN) Approx. 10 heures avec alimentation de sortie de 10 mW (modles E et KR) Lorsque +48V est ON et pendant la connexion ECM-673 :

Approx. 6 heures avec alimentation de sortie de 40mW (modles UC, U et LA) Approx. 6 heures avec alimentation de sortie de 30mW (modles CE et CN) Approx. 7 heures avec alimentation de sortie de 10mW (modles E et KR) 38 98 38 mm (1 1/2 3 7/8 1 1/2 po)

(largeur / hauteur / profondeur)(y compris le connecteur dentre audio) (Figure ) Approx. 139 g (4,9 on) ( lexception des batteries) Tuner diversit portable (URX-P40) Antenne Antenne de fil longueur donde 1/4 (angle rglable) Niveau de sortie audio 60 dBV (Mini prise de verrouillage 3-ples de 3,5mm de diamtre, sortie analogique, niveau de sortie audio 0 dB) 20 dBFS (connexion externe, sortie numrique, niveau de sortie audio 0 dB) 50 dBFS (connexion externe, sortie analogique, niveau de sortie audio 0 dB) Plage de variation du niveau de sortie audio Connecteur de sortie audio Mini prise de verrouillage 3-ples de 3,5 mm de 12 dB +12 dB (incrments de 3 dB) Niveau de sortie casque Connecteur de sortie casque Mthode de rception Oscillateur local Frquences de rception Rapport signal/bruit diamtre, connexion externe 10 mW max. (16-ohm) Mini prise de 3,5 mm de diamtre Mthode diversit relle Synthtiseur PLL pilot par quartz Modle 14UC: 470,125 MHz 541,875 MHz

(canaux UHF-TV 14 25) Modle 25UC: 536,125 MHz 607,875 MHz

(canaux UHF-TV 25 36) Modle 90U: 941,625 MHz 951,875 MHz, 953,000 MHz 956,125 MHz, et 956,625 MHz 959,625 MHz Modle 21CE: 470,025 MHz 542,000 MHz (canaux UHF-TV 21 29) Modle 33CE: 566,025 MHz 630,000 MHz (canaux UHF-TV 33 40) Modle 42CE: 638,025 MHz 694,000 MHz (canaux UHF-TV 42 48) Modle 42LA: 638,125 MHz 697,875 MHz (canaux UHF-TV 42 51) Modle 38CN: 710,025 MHz 782,000 MHz

(canaux UHF-TV 38 46) Modle KR: 925,125 MHz 937,500 MHz Modle E: 794,125 MHz 805,875 MHz 60dB (onde sinusodale de 1 kHz, modulation de 5kHz) Dlai audio Dsaccentuation Ecart de frquence de rfrence Rponse de frquence Distorsion Approx. 0,35ms (sortie analogique) Approx. 0,24 ms (sortie numrique) 50 s 5 kHz 23 Hz 18 kHz (Typique) 0,9% ou moins (onde sinusodale de 1 kHz, Frquence du signal de tonalit En mode compression-expansion UWP-D :

modulation de 5 kHz) 32,382kHz En mode compression-expansion UWP: 32 kHz En mode compression-expansion WL800 :

32,768kHz POWER, RF 0 C 50 C (32 F 122 F) 20 C +55 C (4 F +131 F) Indicateurs Temprature de fonctionnement Temprature de stockage Remarque En cas dutilisation dans des endroits o la temprature ambiante est de 45C

(113F) ou plus, assurez-vous que lappareil nentre pas en contact direct avec votre peau, car cela pourrait provoquer des brlures dues une temprature leve. Fonction NFC Port USB Tension dalimentation Dure de vie des batteries Intgre Type C 3,0 V CC (deux batteries format LR6/AA) 5,0 V CC (fournie par le connecteur USB) Approx. 6 heures (mesure avec deux batteries alcalines Sony format LR6/AA 25 C (77 F), DISPLAY MODE rgl sur AUTO OFF) Dimensions Poids 63 70 31 mm (2 1/2 2 7/8 1 1/4 po)

(largeur / hauteur / profondeur) ( lexception de lantenne) (Figure ) Approx. 131 g (4,6 on) ( lexception des batteries) Plage de frquences Puissance de sortie RF maximale 13,56 MHz (NFC)

< 42 dBA/m (10 m) Portugus Brasileiro Antes de operar a unidade, leia todo este manual e guarde-o para consultas futuras. O modelo U90 s pode ser usado nos EUA. O uso de transmissores U90 exige uma licena e est sujeito a restries de seleo de frequncia e espaamento de canal. Para evitar choque eltrico, no abra o gabinete. Os reparos do aparelho s devem ser efetuados pelo Servio Autorizado Sony. Este smbolo tem o propsito de alertar o usurio sobre a presena de tenses perigosas no isoladas, dentro do gabinete do produto, as quais podem ter intensidade suficiente para constituir risco de choque eltrico para as pessoas. Este smbolo tem o propsito de alertar o usurio quanto presena de instrues importantes de operao e manuteno

(servios) no Manual de Instrues que acompanha o aparelho. ADVERTNCIA Evite o uso prolongado com volume alto (potncia superior a 85 decibis), pois isto poder prejudicar a sua audio (Lei Federal n 11.291/06). Recomendaes importantes sobre o nvel de volume Maximize o prazer de ouvir a msica com este aparelho lendo estas recomendaes que ensinam voc a tirar o mximo proveito do aparelho quando reproduzir um som a um nvel seguro, que permite que o som seja alto, claro, sem distoro, sem causar desconforto e, principalmente, de tal forma que proteja a sua sensibilidade auditiva. Para estabelecer um nvel seguro Ajuste o controle de volume a um nvel baixo. Aumente lentamente o som at poder ouvi-lo clara e confortavelmente, sem distores. Uma vez estabelecido um nvel de som confortvel:

Ajuste o controle de volume e deixe-o nesta posio. O minuto gasto para fazer este ajuste agora, proteger a sua audio no futuro. Usando sabiamente, o seu novo equipamento de som proporcionar a voc uma vida toda de entretenimento e prazer. A Sony recomenda que voc evite a exposio prolongada a rudos muito altos. A seguir, inclumos uma tabela com os nveis de intensidade sonora em decibis e os exemplos de situaes correspondentes para a sua referncia. Nvel de decibis Exemplos 30 40 50 60 70 80 Biblioteca silenciosa, sussurros leves. Sala de estar, refrigerador, quarto longe do trnsito. Trnsito leve, conversao normal, escritrio silencioso. Ar condicionado a uma distncia de 6 m, mquina de costura. Aspirador de p, secador de cabelos, restaurante ruidoso. Trfego mdio de cidade, coletor de lixo, alarme de despertador a uma distncia de 60 cm. OS RUDOS ABAIXO PODEM SER PERIGOSOS EM CASO DE EXPOSIO CONSTANTE 90 100 120 140 180 Metr, motocicleta, trfego de caminho, cortador de grama. Caminho de lixo, serra eltrica, furadeira pneumtica. Show de banda de rock em frente s caixas acsticas, trovo. Tiro de arma de fogo, avio a jato. Lanamento de foguete. Informao cedida pela Deafness Research Foundation, por cortesia. DESCARTE DE PILHAS E BATERIAS De acordo com as pilhas ou baterias fornecidas com este aparelho, considerar as seguintes informaes de descarte. Pilhas e baterias no recarregveis e recarregveis Ateno:

Verifique as instrues de uso do aparelho certificando-se de que as polaridades (+) e (-) esto no sentido indicado. As pilhas podero vazar ou explodir se as polaridades forem invertidas, expostas ao fogo, desmontadas ou ao se tentar recarregar pilhas e baterias no recarregveis. Evite misturar com pilhas de outro tipo ou com pilhas usadas, transport-las ou armazen-las soltas, pois aumenta o risco de vazamento. Retire as pilhas caso o aparelho no esteja sendo utilizado, para evitar possveis danos na eventualidade de ocorrer vazamento. As pilhas devem ser armazenadas em local seco e ventilado. No caso de vazamento de pilha, evite o contato com a mesma. Lave qualquer parte do corpo afetado com gua abundante. Ocorrendo irritao, procure auxlio mdico. No remova o invlucro da pilha. Mantenha fora do alcance das crianas. Em caso de ingesto procure auxlio mdico imediatamente. Para os transmissores UTX-B40/M40/P40 CUIDADO H perigo de exploso se as pilhas/baterias forem substitudas incorretamente. Substitua as pilhas/baterias somente por outras do mesmo tipo ou do tipo equivalente recomendado pelo fabricante. Quando descartar as pilhas/baterias, cumpra com as leis locais ou do pas. ADVERTNCIA No exponha as pilhas/baterias a fontes de calor excessivo, como luz solar, fogo ou algo semelhante. Se o transmissor apresentar uma temperatura elevada anormal, odor de queimado ou fumaa durante o seu uso, remova o suporte de pilhas/baterias e interrompa imediatamente o uso do transmissor. Tenha cuidado para no queimar os dedos quando remover o suporte de pilhas/

baterias, pois as pilhas/baterias podem estar muito quentes neste momento. Para os receivers URX-P40 CUIDADO H perigo de exploso se as pilhas/baterias forem substitudas incorretamente. Substitua as pilhas/baterias somente por outras do mesmo tipo ou do tipo equivalente recomendado pelo fabricante. Quando descartar as pilhas/baterias, cumpra com as leis locais ou do pas. ADVERTNCIA Uma excessiva presso sonora nos fones auriculares e nos fones de ouvido pode provocar uma reduo na percepo de sons. Para usar este produto com segurana, no escute por longos perodos com nveis de presso sonora excessivos. No exponha as pilhas/baterias a fontes de calor excessivo, como luz solar, fogo ou algo semelhante. Se o receptor apresentar uma temperatura elevada anormal, odor de queimado ou fumaa durante o seu uso, remova o suporte de pilhas/baterias e interrompa imediatamente o uso do receptor. Tenha cuidado para no queimar os dedos quando remover o suporte de pilhas/

baterias, pois as pilhas/baterias podem estar muito quentes neste momento. Utilizar o Manual em CD-ROM Pode ler o manual num computador com o Adobe Reader instalado. O Adobe Reader pode ser transferido gratuitamente no website da Adobe. 1 Abra o arquivo index.html no CD-ROM. 2 Selecione e clique no manual que pretende ler. Nota Se o CD-ROM for danificado ou perdido, pode comprar um novo junto de um representante da Sony ou centro de assistncia Sony. Especificaes tcnicas Projeto e especificaes sujeitos a alteraes sem prvio aviso. Notas Sempre verifique se o aparelho est funcionando corretamente antes de usar. A SONY NO SER RESPONSVEL POR INDENIZAES DE QUALQUER ESPCIE, INCLUINDO, SEM LIMITAO, INDENIZAO OU REEMBOLSO POR CONTA DA PERDA DE LUCROS PRESENTES OU POTENCIAIS DEVIDO FALHA DESTE APARELHO, DURANTE O PERODO DE GARANTIA OU DEPOIS DELA, OU POR QUALQUER OUTRA RAZO. SONY NO SER RESPONSVEL POR RECLAMAES DE QUALQUER TIPO FEITAS PELOS UTILIZADORES DESTE APARELHO OU POR TERCEIROS. A SONY NO SER RESPONSVEL PELA EXTINO OU INTERRUPO DE QUAISQUER SERVIOS RELACIONADOS COM ESTE APARELHO RESULTANTES DE CIRCUNSTNCIAS DE QUALQUER NATUREZA. Transmissor (UTX-B40/M40/P40) Itens comuns a todos os transmissores Tipo de oscilador Frequncia da portadora Sintetizador PLL controlado por cristal 470 MHz a 542 MHz (modeloUC14), 536 MHz a 608 MHz (modelo UC25), 566 MHz a 608 MHz e 614 MHz a 638 MHz (modelo UC30), 638 MHz a 698MHz (modelo UC42), 941,625 MHz a 951,875 MHz e 953,000 MHz a 956,125 MHz e 956,625 MHz a 959,625 MHz

(modelo U90) 5 kHz (60 dBV, entrada 1 kHz) 0,9% ou menos (60 dBV, entrada 1 kHz) 60 dB ou mais 0,35 ms UWP no modo compander: 32 kHz WL800 no modo compander: 32,768 kHz 3,0 V CC (duas pilhas alcalinas tipo AA/LR6) 5,0 V CC (fornecida atravs do conector USB) 0 C a 50 C 0 C a 35 C, durante o carregamento Pr-nfase (pr-acentuao) 50 s Desvio de referncia Distoro Relao sinal-rudo Atraso de voz Frequncia do sinal de tom UWP-D no modo compander: 32,382 kHz Tenso de alimentao Temperatura de operao Temperatura de armazenamento Transmissor de corpo (body-pack) (UTX-B40) Antena Conector de entrada de udio Nvel de entrada de udio de referncia Nvel de sada RF Resposta de frequncia Atenuao Indicadores Vida til das pilhas (medida com duas pilhas alcalinas Sony tipo AA/LR6 a 25C) Aprox. 8 horas com potncia de sada de 30 mW Dimenses 63 82 20 mm (largura/altura/profundidade) 60 dBV (entrada MIC, 0 dB de atenuao) 30 mW/5 mW selecionvel 40 Hz a 18 kHz 0 dB a 27 dB (em passos de 3 dB) AUDIO, POWER/MUTING Minitomada de 3,5 mm de dimetro Antena de fio com comprimento de onda de 1/4 20 C a +55 C

(sem a antena) (Figura ) Aprox. 103 g (sem as pilhas) Microfone condensador de eletreto 40 Hz a 20.000 Hz Omnidirecional 43,0 3 dB (0 dB =1 V/Pa, a 1 kHz) 0 C a 50 C Peso Microfone de lapela (ECM-V1BMP) Tipo Resposta de frequncia Diretividade Sensibilidade Temperatura de operao Temperatura de armazenamento Cabo com 20 C a +55 C 2,3 mm de dimetro, cabo blindado com 2 condutores, 1,2 m de comprimento 6,8 19,5 mm (sem o cabo e o conector) aprox. 16,2 g Dimenses Peso Microfone de mo (UTX-M40) Dinmico Unidade de microfone Unidirecional Caracterstica direcional Antena Antena de fio com comprimento de onda de 1/4 Nvel de entrada de udio de referncia Nvel de sada RF Resposta de frequncia Atenuao Indicador Vida til das pilhas (medida com duas pilhas alcalinas Sony tipo AA/LR6 a 25 C) Aprox. 8 horas com potncia de sada de 30 mW Dimenses 48 260 mm (dimetro/comprimento) 55 dBV (entrada MIC, 0 dB de atenuao) 30 mW/5 mW selecionvel 70 Hz a 18 kHz 0 dB a 21 dB (em passos de 3 dB) POWER/MUTING

(Figura ) Aprox. 260 g (sem as pilhas) 60 dBV (com nvel de atenuao de 0 dB) 40 mW/5 mW selecionvel 50 Hz a 18 kHz 0 dB a 48 dB (em passos de 3 dB) Peso Transmissor plug-on (UTX-P40) Nvel de entrada de udio de referncia Nvel de sada RF Resposta de frequncia Atenuao Conector de entrada de udio Indicador Vida til das pilhas (medida com duas pilhas alcalinas Sony tipo AA/LR6 a 25C) Dimenses Com +48 V em OFF:

Aprox. 7 horas com potncia de sada de 40 mW Com +48 V em ON e conexo ECM-673:

Aprox. 6 horas com potncia de sada de 40 mW 41,5 102 41,5 mm (largura/altura/

Tipo XLR-3-11C (fmea) AF/PEAK, POWER/MUTING, +48 V profundidade) (incluindo o conector de entrada de udio) (Figura ) Aprox. 145 g (sem as pilhas) Peso Receptor Receptor de diversidade porttil (URX-P40) Antena Antena de fio com comprimento de onda de 1/4

(ngulo ajustvel) 60 dBV Nvel de sada de udio Conector de sada de udio Minitomada de 3,5 mm de dimetro Nvel de sada dos fones de ouvido Mtodo de recepo Oscilador local Frequncias de recepo 5 mW (16 ) Mtodo de diversidade verdadeira Sintetizador PLL controlado por cristal 470 MHz a 542 MHz (modelo UC14), 536 MHz a 608 MHz (modelo UC25), 566 MHz a 608 MHz e 614 MHz a 638 MHz (modelo UC30), 638 MHz a 698 MHz (modelo UC42), 941,625 MHz a 951,875 MHz e 953,000 MHz a 956,125 MHz e 956,625 MHz a 959,625 MHz

(modelo U90) 60 dB ou mais 0,35 ms Relao sinal-rudo Atraso de voz De-nfase (desacentuao) 50 s Desvio de frequncia de referncia Resposta de frequncia Distoro Sinal de tom Indicadores Temperatura de operao Temperatura de armazenamento Tenso de alimentao Vida til das pilhas 5 kHz 40 Hz a 18 kHz 0,9% ou menos (modulao de 5 kHz) UWP-D no modo compander: 32,382 kHz UWP no modo compander: 32 kHz WL800 no modo compander: 32,768 kHz POWER, RF 0 C a 50 C 0 C a 35 C, durante o carregamento 20 C a +55 C 3,0 V CC (duas pilhas alcalinas tipo AA/LR6) 5,0 V CC (fornecida atravs do conector USB) Aprox. 6 horas (medida com duas pilhas alcalinas Dimenses Peso Sony tipo AA/LR6 a 25 C 63 82 23,8 mm (largura/altura/profundidade)

(sem a antena) (Figura ) Aprox. 136 g (sem as pilhas) UWP-D21/D22/D26_UTX-B40/M40/P40_URX-P40 flyer 5-009-936-01 (1)

 

 

5-009-934-11 (1) Wireless Microphone Package Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. UWP-D21/D22/D26 UTX-B40 UTX-M40 UTX-P40 URX-P40 2019 Sony Corporation Important Notes on Use............................35 Usage and storage ....................................... 35 Cleaning...................................................... 35 Specifications............................................35 Transmitter (UTX-B40/M40/P40).............. 35 Tuner........................................................... 37 Table of Contents Configuration of the Packages ..................3 UWP-D21 ..................................................... 3 UWP-D22 ..................................................... 4 UWP-D26 ..................................................... 5 Models available separately.......................... 6 Features .......................................................7 UWP-D21 ..................................................... 7 UWP-D22 ..................................................... 7 UWP-D26 ..................................................... 7 Name and Function of Parts.......................8 Body-pack transmitter (UTX-B40)............... 8 Hand-held microphone (UTX-M40)............. 9 Plug-on transmitter (UTX-P40).................. 11 Portable diversity tuner (URX-P40) ........... 12 Power Supply.............................................14 Inserting the batteries.................................. 14 Supplying power from a USB connector.... 16 Attaching Accessories..............................17 Attaching accessories to the body-pack transmitter (UTX-B40)...................... 17 Attaching accessories to the hand-held microphone (UTX-M40)................... 18 Attaching accessories to the plug-on transmitter (UTX-P40) ...................... 18 Attaching accessories to the portable diversity tuner (URX-P40) ............................... 18 Operation ...................................................19 If noise is generated .................................... 20 Tuner Settings ...........................................20 Menu structure and operation ..................... 20 Setting the receive channel ......................... 21 Searching for available channels within a group (Clear Channel Scan) .............. 21 Searching for active channels within a group

(Active Channel Scan) ...................... 22 Adjusting the monitor audio level .............. 22 Configuration menu .................................... 23 Transmitter Settings .................................26 Menu structure and operation ..................... 26 Setting the transmit channel........................ 27 Configuration menu .................................... 28 System Configuration Example ...............31 Error Messages .........................................32 Troubleshooting ........................................33 2 Table of Contents Configuration of the Packages This manual is for the UWP-D21/D22/D26 Wireless Microphone Packages. The contents of each package are described below. Note Some of the packages may not be available in certain countries or areas. In addition, the U90 model can only be used in the USA. The use of U90 transmitters requires a license and is subject to restrictions on frequency selection and channel spacing. For details, consult your Sony dealer. UWP-D21 The package consists of a body-pack transmitter (UTX-B40), a portable diversity tuner (URX-P40), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP

(Electronic Field Production) applications can be constructed. Body-pack transmitter

(UTX-B40) (1) Portable diversity tuner

(URX-P40) (1) Supplied accessories Omni-directional lavalier microphone (1) Wind screen (1) Holder clip (1) Shoe mount adapter (1) Belt clip (2) XLR-BMP conversion output cable for the URX-P40 (1) Stereo mini plug-BMP conversion cable (1) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (North American, Brazilian, and Korean models only) Configuration of the Packages 3 UWP-D22 The package consists of a hand-held microphone (UTX-M40), a portable diversity tuner (URX-P40), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP

(Electronic Field Production) applications can be constructed. Hand-held microphone

(UTX-M40) (1) Portable diversity tuner

(URX-P40) (1) Supplied accessories Microphone holder (1) Belt clip (1) Shoe mount adapter (1) XLR-BMP conversion output cable for the URX-P40 (1) Stereo mini plug-BMP conversion cable (1) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (North American, Brazilian, and Korean models only) 4 Configuration of the Packages UWP-D26 The UWP-D26 consists of a plug-on transmitter (UTX-P40), a body-pack transmitter (UTX-B40), a portable diversity tuner (URX-P40), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG

(Electronic News Gathering) or EFP (Electronic Field Production) applications can be constructed. Plug-on transmitter

(UTX-P40) (1) Body-pack transmitter

(UTX-B40) (1) Portable diversity tuner

(URX-P40) (1) Supplied accessories Omni-directional lavalier microphone (1) Wind screen (1) Holder clip (1) Soft case (1) Shoe mount adapter (1) Belt clip (2) Stereo mini plug-BMP conversion cable (1) XLR-BMP conversion output cable for the URX-P40 (1) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (North American, Brazilian, and Korean models only) Configuration of the Packages 5 Models available separately The transmitter and tuner in each package are available for purchase separately. The components provided with each product are given below. UTX-B40 Body-pack transmitter (UTX-B40) (1)

Omni-directional lavalier microphone (1)

Wind screen (1)

Holder clip (1)

Belt clip (1)

Before Use (1)

CD-ROM (1)

Warranty card (1) (North American, Brazilian, and Korean models only) UTX-M40

Hand-held microphone (UTX-M40) (1)

Microphone holder (1)

Before Use (1)

CD-ROM (1)

Warranty card (1) (North American, Brazilian, and Korean models only) UTX-P40

Plug-on transmitter (UTX-P40) (1)

Soft case (1)

Before Use (1)

CD-ROM (1)

Warranty card (1) (North American, Brazilian, and Korean models only) URX-P40

Portable diversity tuner (URX-P40) (1)

Shoe mount adapter (1)

Belt clip (1)

XLR-BMP conversion output cable for the URX-P40

(1)

Stereo mini plug-BMP conversion cable (1)

Before Use (1)

CD-ROM (1)

Warranty card (1) (North American, Brazilian, and Korean models only) 6 Configuration of the Packages Features The UWP-D21/D22/D26 (UWP-D series) Wireless Microphone Packages comprise a transmitter (body-pack transmitter (UTX-B40), hand-held microphone

(UTX-M40), or plug-on transmitter (UTX-P40)) and a receiver (portable diversity tuner (URX-P40)). In combination with a compact camcorder or interchangeable-lens digital camera, the packages can be used for various purposes, such as ENG (Electronic News Gathering), EFP (Electronic Field Production), sports events, and weddings. The features of each package are described below. UWP-D21

High quality sound with Sony Digital Audio Processing

NFC SYNC function for quick and easy secure channel setting

True diversity for stable signal reception

Wide frequency coverage (excluding J, E, and KR models)

Auto gain mode volume control

+15 dB gain volume boost mode for off-mic audio

Line input available

Channel memory function for fast switching between two receiver frequencies

Transmitter frequency sent to receiver

Headphone output for monitoring

Monitor mode for using a receiver as an ear monitor

Variable muting function

Compatibility with Sony WL-800/UWP/UWP-D series

Output level control for receiver

High visibility OLED display (indoor/outdoor use)

USB for power supply

Digital audio interface support using SMAD-P5 Multi-

Interface Shoe Adapter (option)*

* For details on cameras that support this function, visit the Sony website. UWP-D22

High quality sound with Sony Digital Audio Processing

NFC SYNC function for quick and easy secure channel setting

True diversity for stable signal reception

Wide frequency coverage (excluding J, E, and KR models)

Interchangeable head for wide choice of microphone capsule

Auto gain mode volume control

+15 dB gain volume boost mode for off-mic audio

Channel memory function for fast switching between two receiver frequencies

Transmitter frequency sent to receiver

Headphone output for monitoring

Monitor mode for using a receiver as an ear monitor

Variable muting function

Compatibility with Sony WL-800/UWP/UWP-D series

Output level control for receiver

High visibility OLED display (indoor/outdoor use)

USB connector for power supply (URX-P40 only)

Digital audio interface support using SMAD-P5 Multi-

Interface Shoe Adapter (option)*

* For details on cameras that support this function, visit the Sony website. UWP-D26

High quality sound with Sony Digital Audio Processing

NFC SYNC function for quick and easy secure channel setting

True diversity for stable signal reception

Wide frequency coverage (excluding E and KR models)

Auto gain mode volume control

+15 dB gain volume boost mode for off-mic audio

Line input available

+48V power supply (plug-on transmitter)

Channel memory function for fast switching between two receiver frequencies

Transmitter frequency sent to receiver

Headphone output for monitoring

Monitor mode for using a receiver as an ear monitor

Variable muting function

Compatibility with Sony WL-800/UWP series

Output level control for receiver

High visibility OLED display (indoor/outdoor use)

USB for power supply

Digital audio interface support using SMAD-P5 Multi-

Interface Shoe Adapter (option)*

* For details on cameras that support this function, visit the Sony website. Features 7 Name and Function of Parts Body-pack transmitter (UTX-B40)

If a lavalier microphone other than the one supplied is connected, the proper performance may not be obtained. e Display section A RF transmission indicator Displays the current transmission status.

: Transmitting

: Transmission stopped B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. For details on the RF transmission power setting function, see Setting the transmit output level (RF POWER) (page 29). C Audio input level meter Displays the audio input level. D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. E Input level indicator Displays the input level status.

: Microphone input

: Line input F Muting status indicator Displays an icon when the muting function is on. For details about the muting function, see Setting the operation of the audio muting function (MUTE SETTING) (UTX-B40/P40 only) (page 29). G Battery level indicator Displays the battery level. USB is displayed when power is supplied from the USB connector. For details, see Battery level indicator (page 16). H Menu display section Displays various functions. Press the + or button to switch functions. a Antenna b POWER indicator Displays the battery level. Indicator display On (green) Flashing (green) Off Status Sufficient battery level Battery is getting low Supply OFF c AUDIO (audio input level) indicator Turns on or off according to the audio input level as follows. On (red): Audio input level is too high. If the sound is distorted, adjust the attenuation level to decrease the audio input level (page 28). On (green): Audio input level is appropriate. Off: There is no audio input or the input level is too low. Flashing (orange): Audio is muted (i.e., disabled). d Audio input connector (BMP type) Connect to the supplied lavalier microphone. Notes

When the audio input level is set to MIC, a voltage for the lavalier microphone power supply is applied to the audio input connector. Special electrical wiring is used inside the audio input connector for this purpose. 8 Name and Function of Parts For details, see Configuration menu (page 23). Hand-held microphone (UTX-M40) I Gain mode indicator Displays the gain mode setting. For details, see Setting the audio gain (GAIN MODE)

(page 28). f + or button Selects functions or values shown on the display. g Infrared detector Receives the frequency and compander mode set on the tuner. h N-Mark Receives the frequency and compander mode set on the tuner. It also notifies the tuner about the frequency and compander mode set on the transmitter. i Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see Power Supply (page 14). j MUTE button Turns the muting function on/off. You can change the muting function on/off control method in the configuration menu. For details about switching the muting function on/off, see Setting the operation of the audio muting function

(MUTE SETTING) (UTX-B40/P40 only) (page 29). k SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal

(transmission stopped mode). l USB connector (Type C) Connect to a commercially available USB portable power supply. When a USB portable power supply is connected while the power is turned on, the unit automatically operates with power supplied by the USB portable power supply. m POWER button Turns the power on/off. Function Supply ON Supply OFF Operation Press button for one second or longer Press button until the indicator turns off Inside the grip a Microphone unit The standard-equipped microphone unit can be interchanged with another microphone unit having a diameter of 31.3 mm and a pitch of 1.0 mm. For details on attaching and removing the microphone unit, see Replacing the microphone unit (page 18). b POWER indicator Displays the battery level and audio muting (i.e., audio enabled or disabled) status. Indicator display On (green) Flashing (green) Off Flashing (orange) Status Sufficient battery level Battery is getting low Supply OFF Audio is muted (i.e., disabled) c POWER/MUTE button Turns the power on/off. You also use this button to turn the muting function on/off. Function Supply ON Supply OFF Muting ON Muting OFF Operation Press button for one second or longer Press button until the indicator turns off Press button Name and Function of Parts 9 You can disable the power supply operation of the POWER/MUTE button and change the muting function on/off control method from the configuration menu. For details about the muting function, see Setting the operation of the audio muting function (POWER/MUTE)

(UTX-M40 only) (page 29). For details, see Setting the operation of the audio muting function (POWER/MUTE) (UTX-M40 only)

(page 29). F Battery level indicator Displays the battery level. For details, see Battery level indicator (page 16). G Menu display section Displays various functions. Press the + or button to switch functions. For details, see Configuration menu (page 23). H Gain mode indicator Displays the gain mode setting. For details, see Setting the audio gain (GAIN MODE)

(page 28). h Infrared detector Receives the frequency and compander mode set on the tuner. i SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal

(transmission stopped mode). j USB connector (Type C) For use by service personnel. k POWER button Turns the power on/off. l + or button Selects functions or values shown on the display. d Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see Power Supply (page 14). e N-Mark Receives the frequency and compander mode set on the tuner. It also notifies the tuner about the frequency and compander mode set on the transmitter. f Antenna section g Display section A RF transmission indicator Displays the current transmission status.

: Transmitting

: Transmission stopped B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. For details on the RF transmission power setting function, see Setting the transmit output level (RF POWER) (page 29). C Audio input level meter Displays the audio input level. D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. E Muting status indicator Displays an icon when the muting function is on. 10 Name and Function of Parts Plug-on transmitter (UTX-P40) e Display section Front Bottom a Audio input connector (XLR type) Connect to a microphone or the line output of an audio mixer or other device. b +48V (+48 V supply) indicator Lights up when the unit is set to MIC input and is supplying power to the connected microphone. c POWER indicator Displays the battery level. Indicator display On (green) Flashing (green) Off Status Sufficient battery level Battery is getting low Supply OFF d AUDIO (audio input level) indicator Turns on or off according to the audio input level as follows. On (red): Audio input level is too high. If the sound is distorted, adjust the attenuation level to decrease the audio input level (page 28). On (green): Audio input level is appropriate. Off: There is no audio input or the input level is too low. Flashing (orange): Audio is muted (i.e., disabled). A RF transmission indicator Displays the current transmission status.

: Transmitting

: Transmission stopped B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. For details on the RF transmission power setting function, see Setting the transmit output level (RF POWER) (page 29). C Audio input level meter Displays the audio input level. D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. E Input level indicator Displays the input level status.

: Microphone input

: Line input F Muting status indicator Displays an icon when the muting function is on. For details about the muting function, see Setting the operation of the audio muting function (MUTE SETTING) (UTX-B40/P40 only) (page 29). G Battery level indicator Displays the battery level. USB is displayed when power is supplied from the USB connector. For details, see Battery level indicator (page 16). H Menu display section Displays various functions. Press the + or button to switch functions. For details, see Configuration menu (page 23). Name and Function of Parts 11 I Gain mode indicator Displays the gain mode setting. Portable diversity tuner (URX-P40) For details, see Setting the audio gain (GAIN MODE)

(page 28). Front f + or button Selects functions or values shown on the display. g Infrared detector Receives the frequency and compander mode set on the tuner. h N-Mark Receives the frequency and compander mode set on the tuner. It also notifies the tuner about the frequency and compander mode set on the transmitter. i MUTE button Turns the muting function on/off. You can change the muting function on/off control method in the configuration menu. For details about switching the muting function on/off, see Setting the operation of the audio muting function

(MUTE SETTING) (UTX-B40/P40 only) (page 29). j SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal

(transmission stopped mode). k POWER button Turns the power on/off. Function Supply ON Supply OFF Operation Press button for one second or longer Press button until the indicator turns off l USB connector (Type C) Connect to a commercially available USB portable power supply. When a USB portable power supply is connected while the power is turned on, the unit automatically operates with power supplied by the USB portable power supply. Rear m Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). Bottom For details on how to insert batteries, see Power Supply (page 14). 12 Name and Function of Parts a Antenna b PHONES (monitor) connector (3.5 mm diameter, stereo mini jack) Connect to headphones to monitor the audio output. Note Do not connect headphones with a monaural mini jack. This may short-circuit the headphone outputs, resulting in distorted sound output. c POWER indicator Displays the battery level. Indicator display On (green) Flashing (green) Off Status Sufficient battery level Battery is getting low Supply OFF d RF (radio frequency input) indicator Displays the RF input level using the following colors. On (green): Input level is 25 dB or more. On (red): Input level is 15 dB to 25 dB. Off: Input level is 15 dB or lower.

* 0 dB = 1 VEMF e + or button Selects functions or values shown on the display. f N-Mark Sends the set frequency and compander mode to the transmitter. It also detects the tuner about the frequency and compander mode set on the transmitter. g Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see Power Supply (page 14). h Display section A Audio input level meter Displays the audio input level. B Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. C Transmitter power warning indicator Displays an icon when the remaining battery capacity of the transmitter being received is almost discharged. Note This function is enabled only when the transmitter is a UTX-B40/M40/P40. D Transmitter muting status indicator Displays an icon when the muting function of the transmitter being received is on. Note This function is enabled only when the transmitter is a UTX-B40/M40/P40. E Battery level indicator Displays the battery level. USB is displayed when power is supplied from the USB connector. MI is displayed when power is supplied from an SMAD-P5

(not supplied). For details, see Battery level indicator (page 16). F RF level (reception level) indicator Indicates the current reception level. G Menu display section Displays various functions. Press the + or button to switch functions. For details, see Configuration menu (page 23). i NFC SYNC (NFC communication) button Press to start a channel scan and for NFC communication with the transmitter. For details, see Operation (page 19). j SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal

(transmission stopped mode). k POWER button Turns the power on/off. Function Supply ON Supply OFF Operation Press button for one second or longer Press button until the indicator turns off Name and Function of Parts 13 l OUTPUT (audio output) connector (3.5 mm diameter, stereo mini jack) Connect one end of the supplied XLR-BMP conversion output cable for the URX-P40 or the stereo mini plug-

BMP conversion cable here and the other end to the microphone input on a camcorder, mixer, or amplifier. If the microphone input connector on the connected device is a stereo mini jack, connect the straight (BMP) plug to the tuner and the L-shaped (stereo mini) plug to the microphone input connector on the device. Note To prevent damaging the tuner, do not apply a voltage to this connector from a microphone external power supply or other source. m Auxiliary connector Used to connect external accessories. n USB connector (Type C) Connect to a commercially available USB portable power supply. When the power is turned on, the unit operates with power supplied by the USB portable power supply. Power Supply This section describes the power supply of each device. Body-pack transmitter (UTX-B40) and plug-on transmitter (UTX-P40) The unit operates using power supplied from two AA batteries (alkaline, nickel metal hydride, or lithium batteries) or from a supply connected to the USB connector. If power is supplied simultaneously from batteries and from a supply connected to the USB connector, power from the USB connector has precedence. For details about inserting batteries in each device and displaying the battery level, or supplying power from a supply connected to the USB connector, see the following sections. Hand-held microphone (UTX-M40) The unit operates from two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details about inserting batteries and displaying the battery level, see the following sections. Portable diversity tuner (URX-P40) The unit operates from two AA batteries (alkaline, nickel metal hydride, or lithium batteries), power supplied from a supply connected to the USB connector, or power supplied from the auxiliary connector. The power supply that has precedence when both AA battery power and an external power supply via the USB connector or auxiliary connector are available can be specified using the POWER SOURCE (external power selection) function. Under the factory default setting, the power supplied from inserted AA batteries has precedence. For details about inserting batteries and displaying the battery level, or supplying power from supply connected to the USB connector, see the following sections. For details on the POWER SOURCE function setting, see Selecting the preferred power supply (POWER SOURCE) (page 25). Note The use of manganese batteries will result in poor performance. Do not use manganese batteries. Inserting the batteries Notes

Always use sets of the same type of battery. Do not use batteries of different types or batteries with different charge level together.

Replacing the batteries during operation may generate a large noise. Be sure to turn off the unit before replacing the batteries. 14 Power Supply Body-pack transmitter (UTX-B40) /

portable diversity tuner (URX-P40) The following describes the procedure using illustrations for the body-pack transmitter (UTX-B40). Batteries can be inserted in the portable diversity tuner (URX-P40) in the same manner. 1 Press and hold the POWER button to turn the power off. 2 Press and hold the buttons on the left and right sides, and pull off the battery compartment. 2 Turn the grip in the direction of the arrow, and pull the grip down until the battery compartment is visible. 3 Insert two new AA batteries into the battery compartment with 3 and # polarities in the correct orientation. 4 Close the grip, turning it in the reverse direction of step 2. Plug-on transmitter (UTX-P40) 1 Press and hold the POWER button to turn the power off. 2 Turn the battery compartment knob counterclockwise to open the cover. 3 Insert two new AA batteries into the battery compartment with 3 and # polarities in the correct orientation. 3 Open the battery compartment, insert two new AA batteries into the battery compartment with 3 and #

polarities in the correct orientation, and reattach the compartment. Make sure that the battery compartment is locked securely. Hand-held microphone (UTX-M40) 1 Press and hold the POWER/MUTE button or POWER button to turn the power off. Note The button used to turn off power varies depending on the POWER/MUTE setting. For details, see Setting the operation of the audio muting function (POWER/MUTE) (UTX-M40 only)

(page 29). Power Supply 15

Batteries cannot be charged with this unit.

When not using the device for a long period of time, remove the batteries. If the batteries leak for any reason, consult your Sony service representative. Supplying power from a USB connector The transmitter (UTX-B40/P40) and tuner (URX-P40) can operate from a commercially available USB-output type AC adapter or portable power supply connected to the USB connector. When supplying power using a USB-output type AC adapter or portable power supply, use a unit that satisfies the following conditions.

Output connector: USB type C

Rated voltage: 5 V

Output current: 200 mA or higher Displays USB when power is supplied from the USB connector. Notes

The UTX-M40 hand-held microphone cannot be supplied using a USB connector.

Noise may occur in the audio depending on the AC adapter or portable power supply that is connected. In such cases, you can reduce the noise by distancing the unit or lavalier microphone from the AC adapter or portable power supply or otherwise altering their positions.

If a USB Type C adapter (from a different connector type) or a cable that does not comply with the USB Type C standard is used, noise may occur or power may not be applied correctly. Always use cables that comply with the USB Type C standard. 4 Close the battery compartment cover and turn the knob clockwise to lock the cover. Check that the cover is fully closed before tightening the knob. Battery level indicator Press and hold the POWER button for 1 second or longer to display the battery level on the display. Immediately replace both batteries with new batteries if the indicator starts flashing (indication 5 below). If using new alkaline batteries, use after checking the recommended time limits. Battery level indicator Battery status 1 Lights Good 2 Lights Less than 70% charge remaining 3 Lights Less than 40% charge remaining 4 Lights Less than 20% charge remaining 5 Flashes Almost empty Notes

When BATTERY TYPE is set to TYPE1, the battery level is indicated based on the use of new LR6 (size AA) Sony alkaline batteries. The battery level may not be displayed correctly when different kinds of batteries, different brand of batteries, or old batteries are used. If using batteries other than size AA alkaline batteries, select the battery type using the BATTERY TYPE function.

If you plan to use the transmitter continuously for a long period of time, it is recommended that you replace the batteries with brand new ones.

Battery power is gradually consumed, even when the unit is turned off. Remove the batteries from the unit before prolonged periods of disuse. For details on the BATTERY TYPE function setting, see Setting the battery type (BATTERY TYPE) (page 25). Battery precautions Batteries may leak or explode if mistreated. Be sure to follow these instructions.

Insert batteries in the correct 3 and # polarity orientation.

Always replace the two batteries together with new ones.

Do not use different types of batteries or old and new ones together. 16 Power Supply Attaching Accessories Attaching the wind screen to the microphone This section describes how to attach the supplied accessories to each device. Attaching accessories to the body-pack transmitter (UTX-B40) Connecting the microphone Microphone (supplied) Align and insert the microphone into the hole in the wind screen. Attaching a belt clip For a secure connection, turn to lock the connector. Note Be sure to attach or remove the microphone after turning off the transmitter. Attaching the holder clip to the microphone Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side. To remove a belt clip Insert a pointed object, such as a ball-point pen, between the belt clip and the transmitter, and pry the end of the belt clip from the hole on the side of the transmitter. Push the end of the microphone holder to expand the ring opening

(1), and insert the microphone

(2). Align the groove on the base of the microphone with the ring, then release the clip to secure the microphone. To secure the microphone cable Insert the microphone cable through the clamp of the holder clip. Attaching Accessories 17 Attaching accessories to the hand-held microphone (UTX-M40) Attaching the microphone holder Disconnecting a microphone or cable Microphone or cable connector Release button Insert the base of the microphone into the holder. Replacing the microphone unit Removing the microphone unit Press the release button firmly until the lock is fully released, and pull the microphone or cable out slowly. Attaching accessories to the portable diversity tuner (URX-P40) Connecting the conversion cable to the OUTPUT connector Example: XLR-BMP conversion output cable for the URX-P40 Turn the microphone unit in the direction of the arrow. Attaching the microphone unit Turn the microphone unit in the opposite direction from when you removed it, and make sure that the unit is securely attached to the microphone. Attaching accessories to the plug-on transmitter (UTX-P40) Attaching a microphone or cable For a secure connection, turn to lock the connector. Attaching a belt clip See Attaching a belt clip (page 17). Attaching the shoe mount adapter Attach the belt clip before attaching the shoe mount adapter (page 17). Note Microphone or cable connector Attach belt clips upside-down if planning to attach the shoe mount adapter. Push the microphone or cable connector (XLR-3-12C connector) into the audio input connector of the UTX-P40 until it clicks into place. 18 Attaching Accessories Push the bottom of the belt clip to make some space between the belt clip and the tuner (1), align the belt clip with the two vertical grooves on the shoe mount adapter, and insert the adapter in the direction of the arrow (2). Push the shoe mount adapter in fully until the belt clip fits into the horizontal groove on the adapter holds. Note If attaching a camcorder, bend the URX-P40 antenna down so that the antenna is not reflected on the display. To remove the shoe mount adapter Push and hold the part labeled PUSH on the shoe mount adapter (1), and disengage the horizontal part of the belt clip from the horizontal groove on the shoe mount adapter

(2). Then, push the shoe mount adapter in the direction of the arrow (3). Operation Procedure for UWP-D series devices (UTX-B40/

M40/P40 and URX-P40) 1 Connect the tuner as required. For details about example connections, see System Configuration Example (page 31). 2 Press and hold the POWER button for at least one second on the tuner to turn the power on. Note Some noise may occur when power is turned on. Accordingly, turn down the audio input level of devices connected to the tuner when turning the power on. 3 Press and hold the NFC SYNC button on the tuner for at least four seconds. Clear Channel Scan starts searching for an available channel within the configured channel group. When Clear Channel Scan finishes, the channel with the least noise and interference will be set. When the channel is set, NFC communication starts automatically. For details about how to set the group, see Setting the receive channel (page 21). 4 Place the N-Marks of both the tuner and transmitter in close proximity (approximately 5 mm). At this time, make sure that the transmitter is turned on or that the battery level is sufficient and the transmitter is turned off. Example using a body-pack transmitter (UTX-B40). Similarly, place the N-Marks in close proximity when using other types of transmitters. Operation 19 Information about the channel set on the tuner is sent to the transmitter, and then the transmit channel is set. COMPLETE is shown on the display of the transmitter and tuner, and the transmitter vibrates when setup is finished. If the transmitter is turned off when NFC communication is initiated, the transmitter automatically turns on and starts transmitting. Notes

NFC communication lasts approximately 20 seconds. Perform step 4 within 20 seconds of performing step 3. If 20 seconds have elapsed, you can reestablish NFC communication using the SYNC RX->TX menu on the tuner.

Communications using NFC may be adversely affected, depending on the surrounding environment. If this occurs, use the SYNC RX->TX menu on the tuner to reestablish the link.

If COMPLETE is shown on the display of the tuner but the transmitter does not vibrate, the setup may not be finished. If this occurs, use the SYNC RX->TX menu on the tuner to reestablish the link. If noise is generated Depending on the environment where the devices are installed, external noise or radio waves may disrupt transmission on certain channels. When selecting a channel under these circumstances, turn off the transmitter. Then, on the tuner, select a channel for which the RF indicator does not light up (i.e., a channel free from noise or radio wave interference). Set the same channel on the transmitter. Note To prevent interference or noise, take the following precautions.

Do not use two or more transmitters on the same channels.

When operating two or more UWP-D series packages simultaneously, set each package to a different channel within the same channel group.

Keep the antennas on the tuner and transmitter separated by at least 3 meters (about 10 feet).

When operating two or more UWP-D series packages simultaneously with different channel groups, make sure that they are at least 100 meters (330 feet) apart if they are used within clear sight of each other (actual distance may vary depending on the circumstances). Tuner Settings Menu structure and operation Procedure for portable diversity tuner (URX-P40) There are two menu display modes that can be selected according to the application. Simple mode This mode displays only the required settings for the tuner and audio output. You can enable simple mode by setting MENU MODE

(menu display mode) to SIMPLE. Configuration menus

GP/CH (group/channel) select

PHONES (monitor audio) setting

BAND (frequency band) select (Not available on Japanese and Korean models)

CLR CH SCAN (clear channel scan) function

OUTPUT LEVEL (audio output level) setting

SYNC RX->TX (NFC communication) function

SYNC TX->RX (NFC communication) function

POWER LOCK (POWER button lock) function

RUNNING TIME (accumulated running time) display

MENU MODE (menu display mode) setting Extended mode This mode displays all configuration menus. You can enable extended mode by setting MENU MODE

(menu display mode) to ADVANCED. Note The existing settings configured in extended mode are active even when using simple mode. Configuration menus

GP/CH (group/channel) select

PHONES (monitor audio) setting

BAND (frequency band) select (Not available on Japanese and Korean models)

CLR CH SCAN (clear channel scan) function

OUTPUT LEVEL (audio output level) setting

SYNC RX->TX (NFC communication) function

SYNC TX->RX (NFC communication) function

POWER LOCK (POWER button lock) function

RUNNING TIME (accumulated running time) display

MENU MODE (menu display mode) setting

MONITOR MODE (monitor audio level screen lock) function

CH MEMORY (store previous channel) function

POWER SOURCE (external power selection) setting

ACT CH SCAN (active channel scan) function

COMPANDER (compander mode) setting

BATTERY TYPE (battery type) setting

DISPLAY MODE (display setting) function

BRIGHTNESS (display brightness) setting

FCT RESET (factory default setting) function 20 Tuner Settings

VERSION (software version) display Basic menu operation The basic menu operation is the same in simple mode and extended mode. 3 Use the + or button to select the desired group name, then press the SET button. The channel group is set, and the channel number display starts flashing. Function name Setting 1 Press the + or button to display the function to be set. 2 Press and hold the SET button until the setting starts flashing. 3 Press the + or button to change the setting. 4 Press the SET button to enter the setting. Note If no operation is performed for 30 seconds, the display will turn off or will dim. Pressing any button will turn the display on again. For details about display settings, see Changing the display settings (DISPLAY MODE) (page 25). Setting the receive channel Procedure for portable diversity tuner (URX-P40) For details about the channel groups and channels that can be selected, refer to the Frequency List on the CD-ROM. 1 Use the + or button to display the GP/CH menu. 2 Press and hold the SET button for one second or longer. The channel group display starts flashing. 4 Use the + or button to select the desired channel number, then press the SET button. The displays stops flashing and the desired channel is set. Notes

If there is no user input within ten seconds after the channel group display or channel number display starts flashing, the displayed setting that is flashing is saved. The same applies when setting other parameters.

The frequency indicator changes in response to the channel number.

The tuner continues to receive, even when setting the receive channel.

Do not remove the batteries while setting the receive channel. If they are removed, re-insert them and repeat the procedure from the beginning.

Make sure that the same channel is set on the transmitter and tuner within the same system. Searching for available channels within a group (Clear Channel Scan) Procedure for portable diversity tuner (URX-P40) You can search for available channels within the specified channel group. Before performing this procedure, select the channel group. For details, see Setting the receive channel (page 21). 1 Use the + or button to display the CLR CH SCAN menu. 2 Press and hold the SET button for one second or longer. Press and hold until the channel group and +

display starts flashing. Tuner Settings 21 3 Press the + button. The tuner starts to scan through the selected channel group. When available channels are found, the first channel number among the available channels starts flashing on the display. To display the next available channel number Press the + button. To cancel searching Press the button. The display returns to the CLR CH SCAN menu. 4 Press the SET button when the desired channel number starts flashing. The search for available channels finishes and the displayed channel is set. Once a channel is confirmed, you can select whether to send the setting via NFC communication. 5 Select YES, and place the N-Marks of the transmitter and tuner in close proximity. Information about the channel set on the tuner is sent to the transmitter, and then the transmit channel is set. If you do not want to set the transmitter channel, select NO or perform no action for ten seconds or longer to not send the setting to the transmitter. To scan channels automatically With the tuner power on, press and hold the NFC SYNC button for at least four seconds to automatically start a clear channel scan. Searching for active channels within a group (Active Channel Scan) Procedure for portable diversity tuner (URX-P40) You can search for channels in use within the specified channel group. This is useful when using more than one tuner in combination with a single transmitter. Before performing this procedure, select the channel group. For details, see Setting the receive channel (page 21). 1 Use the + or button to display the ACT CH SCAN menu. 2 Press and hold the SET button for one second or longer. Press and hold until the channel group and +

display starts flashing. 22 Tuner Settings 3 Press the + button. The tuner starts to scan for active channels in the selected channel group. When active channels are found, the first channel number among the active channels starts flashing on the display. To display the next active channel number Press the + button. To cancel searching Press the button. The display returns to the ACT CH SCAN menu. 4 Press the SET button when the desired channel number starts flashing. The search for active channels finishes and the displayed channel is set. Adjusting the monitor audio level Procedure for portable diversity tuner (URX-P40) You can set the monitor audio level within the range 1 to 16. 1 Use the + or button to display the PHONES menu. The current monitor audio level is displayed. 2 Press and hold the SET button for one second or longer. Press and hold until the monitor audio level flashes. 3 Use the + or button to set the desired monitor audio level, then press the SET button. The setting value is stored. The setting is retained even after the power is turned off. Configuration menu Procedure for portable diversity tuner (URX-P40) This section describes each function and configurable items. Underlined entries indicate factory default settings. Selecting group/channel (GP/CH) The factory default setting varies depending on the model. For details, see Setting the receive channel (page 21). Adjusting the monitor audio level

(PHONES) Adjusts the monitor audio level for the headphones. The factory default setting is 12. For details, see Adjusting the monitor audio level

(page 22). Selecting the frequency band (BAND) Selects the receive frequency band. Note This menu is not available on Japanese and Korean models. On these models, the frequency band cannot be selected. For details about the groups and channels in each frequency band, refer to the Frequency List on the CD-ROM. Searching for and selecting available channels (CLR CH SCAN) Searches for available channels. For details, see Searching for available channels within a group (Clear Channel Scan) (page 21). Setting the audio output level (OUTPUT LEVEL) Sets the audio output level. You can set the level in 3 dB increments in the range 12 dB to +12 dB. The factory default setting is 0 dB. Note The monitor output level does not change when you change the output level in the OUTPUT LEVEL menu. The monitor output level is adjusted separately. For details about adjusting the monitor audio level, see Adjusting the monitor audio level (page 22). Configuring transmitter settings via NFC communication (SYNC RX->TX) Transfers the frequency and compander mode set on the tuner to a transmitter using NFC communication. 1 Use the + or button to display the SYNC RX->TX menu. 2 Press and hold the SET button for one second or longer. A confirmation screen appears. 3 Use the + or button to display YES, and press the SET button. 4 Place the N-Marks of both the tuner and transmitter in close proximity (approximately 5 mm). At this time, make sure that the transmitter is turned on or that the battery level is sufficient and the transmitter is turned off. The frequency and compander mode for use on the transmitter are set. Notes

NFC communication lasts approximately 20 seconds. Perform step 4 within 20 seconds of performing step 3. After 20 seconds have elapsed, NFC communication automatically finishes and the GP/CH menu appears.

During NFC communication, the signal from a wireless microphone cannot be received. Reflecting transmitter settings on the tuner via NFC communication (SYNC TX->RX) Accesses the frequency and compander mode set on the transmitter and reflects those settings on the tuner using NFC communication. 1 Use the + or button to display the SYNC TX->RX menu. 2 Press and hold the SET button for one second or longer. A confirmation screen appears. 3 Use the + or button to display YES, and press the SET button. 4 Place the N-Marks of both the tuner and transmitter in close proximity (approximately 5 mm). At this time, make sure that the transmitter is turned on or that the battery level is sufficient and the transmitter is turned off. The frequency and compander mode for use on the tuner are set. Tuner Settings 23 Notes

NFC communication lasts approximately 20 seconds. Perform step 4 within 20 seconds of performing step 3. After 20 seconds have elapsed, NFC communication automatically finishes and the GP/CH menu appears.

During NFC communication, the signal from a wireless microphone cannot be received. Locking the POWER button (POWER LOCK) You can lock the POWER button to prevent the power being turned off inadvertently during reception. UNLOCK: Press and hold the POWER button to turn the power on/off. LOCK: The power does not turn off, even after pressing the POWER button. To release the lock state To release the lock state, either set the POWER LOCK menu to UNLOCK or use the following procedure. 1 When the button is in the LOCK state, press and hold the POWER button. A prompt appears asking you whether to release the lock state. 2 Use the + or button to select YES, then press the SET button. The lock state is released. Note If the batteries are removed and reinserted while the POWER button is set to LOCK, the power will turn on automatically but the lock state of the POWER button does not change. Displaying the accumulated running time

(RUNNING TIME) Displays the accumulated running time of the tuner as a guide to total usage time. The factory default setting is 00:00. Up to 99:99 can be displayed. To reset the time display 1 Press and hold the SET button until the time display starts flashing. 2 Press the button to display 00:00 CLR and press the SET button. Pressing the + button when 00:00 CLR is displayed causes the time display to start flashing. You can press the SET button in this state to cancel the reset of the accumulated running time. Setting the menu display mode (MENU MODE) Sets the menu display mode. SIMPLE: Displays only the required settings. ADVANCED: Displays all settings. Using monitor audio level mode

(MONITOR MODE) When this function is enabled, the display shows the monitor audio level screen (fixed). Using the + or button changes the monitor audio level only. 1 Use the + or button to display the MONITOR MODE menu. 2 Press and hold the SET button for one second or longer. 3 Use the + or button to display ON, and press the SET button. Monitor audio level mode is activated, and displayed. is To release monitor audio level mode 1 Press and hold the SET button, POWER button, or NFC SYNC button for one second or longer until ESCAPE? Is displayed. 2 Use the + or button to display YES, and press the SET button. The lock state is released. Notes

This function is displayed in extended mode only.

This function is released when the power is turned off. Reconfigure the setting after the power is turned on. Switching to the previous channel (CH MEMORY) You can switch to the previously set channel. This is useful when using one tuner in combination with two transmitters. Set the channel you want to use beforehand. For details about how to set the channel, see Setting the receive channel (page 21). 1 Use the + or button to display the CH MEMORY menu. 2 Press and hold the SET button until YES? starts flashing. 3 Press the SET button. The previously set channel and the currently set channel are displayed. 24 Tuner Settings Use the + or button to toggle between the channels. To exit the CH MEMORY function 1 Press and hold the SET button until CANCEL? Is displayed. 2 Use the + or button to display YES, and press the SET button. The display returns to the CH MEMORY menu. Notes

This function is displayed in extended mode only.

If this function is enabled with the factory default channel settings, two factory default channels are displayed.

The NFC SYNC button is disabled while using this function. Disable this function first if you want to use the NFC SYNC button.

When BAND is changed, the default channel in the new band is stored as the previously set channel. Selecting the preferred power supply

(POWER SOURCE) Specifies whether the power supply from the batteries inserted in the unit or from an external USB portable power supply or accessory connected to the USB connector or auxiliary connector has precedence. BATT -> EXT: Batteries inserted in the unit have precedence. EXT -> BATT: Power supplied from a USB connector or externally connected sources have precedence. BATT ONLY: Batteries inserted in the unit are used, and power supplied from the USB connector or auxiliary connector is not used even after the batteries are discharged. Notes

When BATT -> EXT or EXT -> BATT is specified and power from the preferred source is cut off, the power supply automatically switches to the other source. Therefore, when only one power supply is available, that power supply will be used regardless of the POWER SOURCE setting. There may be a brief interruption in the audio when the power supply switches.

When power is supplied from both the USB connector and an external connection connector, select the supply from the USB connector. Setting the frequency to an active channel

(ACT CH SCAN) Searches for channels already in use. This is useful when using more than one tuner in combination with a single transmitter. Note This function is displayed in extended mode only. For details, see Searching for active channels within a group (Active Channel Scan) (page 22). Setting the compander mode

(COMPANDER) Sets the operating mode of the compander. UWP-D: High speech quality mode supported in combination with UWP-D series devices. UWP: Mode supported in combination with Sony UWP-series transmitters. WL800: Mode supported in combination with Sony 800-series transmitters. Notes

This function is displayed in extended mode only.

No audio is output if the tone signal frequency is different due to the use of a combination of devices with different compander mode settings. Setting the battery type (BATTERY TYPE) You can set the type of battery being used in order to provide a more accurate battery level indication. TYPE1: Recommended setting when using alkaline LR6

(size AA) batteries. Indicates the battery level based on the characteristics of new Sony alkaline LR6 (size AA) batteries. TYPE2: Recommended setting when using rechargeable nickel metal hydride batteries. TYPE3: Recommended setting when using lithium batteries. Notes

This function is displayed in extended mode only.

The characteristics of batteries change according to battery type and environmental conditions. It is recommended that you understand the characteristics of batteries before using them. Changing the display settings (DISPLAY MODE) Changes the display mode of the OLED display when 30 seconds have elapsed without any button activity. AUTO OFF: If no button operation is performed for 30 seconds, the display will turn off. Press a button to turn on the display again. DIMMER: If no button operation is performed for 30 seconds, the display will dim. Press a button to turn on the display again. Note This function is displayed in extended mode only. Tuner Settings 25 Setting the display brightness

(BRIGHTNESS) Adjusts the brightness of the OLED display using ten levels. The configurable values are given below.

(Dark) 1 2 3 4 5 6 7 8 9 10 (Bright) Note This function is displayed in extended mode only. Restoring factory default settings (FCT RESET) Restores all parameters to their factory default settings. Press and hold the SET button. A prompt appears asking you whether to restore factory default settings. Press the

+ or button to select YES, then press the SET button. The tuner parameters are restored to their factory default settings. Notes

This function is displayed in extended mode only.

After a reset, the audio output level and monitor output level are also restored to their factory default settings. Note that this may cause the volume on connected devices and in headphones to suddenly change. Displaying the software version

(VERSION) Displays the software version of the tuner. Note This function is displayed in extended mode only. Transmitter Settings Menu structure and operation Procedure for all transmitters (UTX-B40/M40/

P40) There are three menu display modes that can be selected according to the application. Simple mode This mode displays only the required settings for transmitting audio. You can enable simple mode by setting MENU MODE

(menu display mode) to SIMPLE. Configuration menus

GP/CH (group/channel) select

BAND (frequency band) select (Not available on Japanese and Korean models)

ATTENUATOR (attenuator) setting

GAIN MODE (audio gain) setting

LCF (low-cut filter) setting

INPUT LEVEL (audio input level) select (UTX-B40/

P40 only)

RF POWER (RF transmit output level) select

+48V SUPPLY (+48 V power supply) setting

(UTX-P40 only)

POWER LOCK (POWER button lock) function

RUNNING TIME (accumulated running time) display

MENU MODE (menu display mode) setting Note The following configuration menus cannot be modified during transmission. Set these menus in transmission stopped mode.

GP/CH (group/channel) select

BAND (frequency band) select (Not available on Japanese and Korean models)

RF POWER (RF transmit output level) select Extended mode This mode displays all configuration menus. You can enable extended mode by setting MENU MODE

(menu display mode) to ADVANCED. Note The existing settings configured in extended mode are active even when using simple mode. Configuration menus

GP/CH (group/channel) select

BAND (frequency band) select (Not available on Japanese and Korean models)

ATTENUATOR (attenuator) setting

GAIN MODE (audio gain) setting

LCF (low-cut filter) setting

INPUT LEVEL (audio input level) select (UTX-B40/

P40 only) 26 Transmitter Settings

RF POWER (RF transmit output level) select

+48V SUPPLY (+48 V power supply) setting

(UTX-P40 only)

POWER LOCK (POWER button lock) function

RUNNING TIME (accumulated running time) display

MENU MODE (menu display mode) setting

MUTE SETTING (audio muting setting) function

(UTX-B40/P40 only)

POWER/MUTE (power supply / audio muting) setting

(UTX-M40 only)

AUDIO PHASE (phase switching) setting (UTX-B40 only)

COMPANDER (compander mode) setting

OCUPNCY SENS (motion detection sensor mode) setting

BATTERY TYPE (battery type) setting

DISPLAY MODE (display setting) function

BRIGHTNESS (display brightness) setting

FCT RESET (factory default setting) function

VERSION (software version) display Function name Setting 1 Press the + or button to display the function to be set. 2 Press and hold the SET button until the setting starts flashing. 3 Press the + or button to change the setting. 4 Press the SET button to enter the setting. Note Note The following configuration menus cannot be modified during transmission. Set these menus in transmission stopped mode.

GP/CH (group/channel) select

BAND (frequency band) select (Not available on Japanese and Korean models)

RF POWER (RF transmit output level) select

FCT RESET (factory default setting) function Transmission stopped mode This mode allows settings to be modified when RF transmission has stopped. Use this mode to make settings without risk of interrupting other wireless traffic when setting channels and other settings. With the power off, press and hold the SET button and press the POWER button or POWER/MUTE button for at least one second to turn the power on and to display the transmission stopped mode menu. The following configuration menus can only be modified in transmission stopped mode.

GP/CH (group/channel) select

BAND (frequency band) select (Not available on Japanese and Korean models)

RF POWER (RF transmit output level) select

FCT RESET (factory default setting) function Basic menu operation The basic menu operation is the same in simple mode, extended mode, and transmission stopped mode. If no operation is performed for 30 seconds, the display will turn off or will dim. Pressing any button will turn the display on again. For details about display settings, see Changing the display settings (DISPLAY MODE) (page 30). Setting the transmit channel Procedure for all transmitters (UTX-B40/M40/

P40) For details about the channel groups and channels that can be selected, refer to the Frequency List on the CD-ROM. 1 Press and hold the SET button and press the POWER button or POWER/MUTE button to turn the power on. 2 Use the + or button to display the GP/CH menu. 3 Press and hold the SET button for one second or longer. Press and hold until the channel group display starts flashing. 4 Use the + or button to select the desired group name, then press the SET button. The channel group is set, and the channel number display starts flashing. Transmitter Settings 27 Adjusting the audio input attenuation level (ATTENUATOR) You can set the audio input attenuation level in 3 dB increments to reduce noise distortion. The factory default setting is 9 dB on the UTX-B40, and 0 dB on the UTX-M40/P40. Notes

On the UTX-B40/P40, --- is displayed if INPUT LEVEL is set to LINE and GAIN MODE is set to AUTO GAIN, and the attenuation level cannot be modified (fixed).

If the attenuation level is set too high, the noise level may increase. Set the level as close as possible to 0 dB if using a lavalier microphone attached to your torso. Setting the audio gain (GAIN MODE) AUTO GAIN: Sets the gain high, and uses a limiter to help prevent distortion. NORMAL: Enables adjustment of the attenuation level. The attenuator can be adjusted to match the connected microphone. 15dB BOOST: Boosts the gain by 15 dB for when the microphone is not near the persons mouth and the audio level is insufficient. Notes

On the UTX-B40/P40, --- is displayed if INPUT LEVEL is set to LINE, and the audio gain cannot be modified.

When GAIN MODE is set to AUTO GAIN, the ATTENUATOR setting cannot be modified.

Changing the GAIN MODE setting may cause the volume on devices connected to the tuner and in headphones to suddenly change. Setting the low-cut filter (LCF) You can set the low-cut filter to reduce noise caused by wind. You can set the cutoff frequency to OFF/LOW/MID/

HIGH. OFF: No filtering LOW: 100 Hz cutoff frequency MID: 150 Hz cutoff frequency HIGH: 200 Hz cutoff frequency Switching the audio input level (INPUT LEVEL) (UTX-B40/P40 only) Sets the input level according to the audio input device. You can switch between MIC and LINE. The factory default setting is MIC. Notes

Do not switch this function to MIC when the audio input source is an audio mixer or other line level device. If an excessive audio level is input, it may cause noise distortion or damage the playback/recording equipment. 5 Use the + or button to select the desired channel number, then press the SET button. The displays stops flashing and the desired channel is set. Notes

If there is no user input within ten seconds after the channel group display or channel number display starts flashing, the displayed setting that is flashing is saved. The same applies when setting other parameters.

The frequency indicator changes in response to the channel number.

Do not remove the batteries while making settings. If they are removed, re-insert them and repeat the procedure from the beginning.

Make sure that the same channel is set on the transmitter and tuner within the same system. Configuration menu Procedure for all transmitters (UTX-B40/M40/

P40) This section describes each function and configurable items. Underlined entries indicate factory default settings. Selecting group/channel (GP/CH) The factory default setting varies depending on the model. For details, see Setting the transmit channel (page 27). Note This function can be modified in transmission stopped mode only. Selecting the frequency band (BAND) Selects the transmit frequency band. Notes

This function can be modified in transmission stopped mode only.

This menu is not available on Japanese and Korean models. On these models, the frequency band cannot be selected. For details about the groups and channels in each frequency band, refer to the Frequency List on the CD-ROM. 28 Transmitter Settings

--- is displayed for ATTENUATOR and GAIN MODE if INPUT LEVEL is set to LINE, and the settings cannot be modified. Setting the transmit output level (RF POWER) Set the transmitted RF power to HIGH or LOW. The transmit power level varies depending on the model. Note This function can be modified in transmission stopped mode only. Setting the microphone drive power supply (+48V SUPPLY) (UTX-P40 only) You can supply power from the transmitter when using a microphone that requires an external power supply. When set to ON, power is supplied to the connected microphone and the +48 V indicator lights. The factory default setting is OFF. Locking the POWER button (POWER LOCK) You can lock the POWER button to prevent the power being turned off inadvertently during transmission. UNLOCK: Press and hold the POWER button to turn the power on/off. LOCK: The power does not turn off, even after pressing the POWER button. To release the lock state To release the lock state, either set the POWER LOCK menu to UNLOCK or use the following procedure. 1 When the button is in the LOCK state, press and hold the POWER button. A prompt appears asking you whether to release the lock state. 2 Use the + or button to select YES, then press the SET button. The power turns off. Note If the batteries are removed and reinserted while the POWER button is set to LOCK, the power will turn on automatically but the lock state of the POWER button does not change. Displaying the accumulated running time

(RUNNING TIME) Displays the accumulated running time of the transmitter as a guide to total usage time. The factory default setting is 00:00. Up to 99:99 can be displayed. To reset the time display 1 Press and hold the SET button until the time display starts flashing. 2 Press the button to display 00:00 CLR and press the SET button. Pressing the + button when 00:00 CLR is displayed causes the time display to start flashing. You can press the SET button in this state to cancel the reset of the accumulated running time. Setting the menu display mode (MENU MODE) Sets the menu display mode. SIMPLE: Displays only the required settings. ADVANCED: Displays all settings. Setting the operation of the audio muting function (MUTE SETTING) (UTX-B40/P40 only) Pressing the MUTE button while transmitting mutes the audio so that audio from the tuner is not output. This function sets whether the audio is muted for various operations of the MUTE button. MUTE(ALT): Audio is muted when the MUTE button is pressed. Pressing the MUTE button again restores the audio output. MUTE HOLD: Audio is muted while the MUTE button is pressed, and audio is output when the MUTE button is released. PTT HOLD: Audio is output while the MUTE button is pressed, and audio is muted when the MUTE button is released. DISABLE: Audio is muted regardless of the MUTE button operation. Setting the operation of the audio muting function (POWER/MUTE) (UTX-M40 only) Pressing the POWER/MUTE button while transmitting mutes the audio so that audio from the tuner is not output. This function sets whether the audio is muted for various operations of the POWER/MUTE button and whether the power is turned on/off using the POWER/MUTE button. POWER/MUTE: Audio is muted when the POWER/

MUTE button is pressed. Pressing the POWER/MUTE button again restores the audio output. The power can be turned on/off by pressing and holding the POWER/

MUTE button for one second or longer. MUTE(ALT): Audio is muted when the POWER/

MUTE button is pressed. Pressing the POWER/MUTE button again restores the audio output. The power cannot be turned on/off using the POWER/MUTE button. MUTE HOLD: Audio is muted while the POWER/

MUTE button is pressed, and audio is output when the POWER/MUTE button is released. The power cannot be turned on/off using the POWER/MUTE button. Transmitter Settings 29 PTT HOLD: Audio is output while the POWER/MUTE button is pressed, and audio is muted when the POWER/

MUTE button is released. The power cannot be turned on/

off using the POWER/MUTE button. DISABLE: Audio is muted regardless of the POWER/

MUTE button operation. Also, the power cannot be turned on/off. Switching the phase of the microphone

(AUDIO PHASE) (UTX-B40 only) You can switch the phase of a connected microphone

(excluding the supplied lavalier microphone) to output audio in reverse phase. NORMAL: Phase is not reversed. Set to NORMAL when the supplied lavalier microphone is connected. INVERT: Reverses the phase within the transmitter. Note Notes

This function is displayed in extended mode only.

The characteristics of batteries change according to battery type and environmental conditions. It is recommended that you understand the characteristics of batteries before using them. Changing the display settings (DISPLAY MODE) Changes the display mode of the OLED display when 30 seconds have elapsed without any button activity. AUTO OFF: If no button operation is performed for 30 seconds, the display will turn off. Press a button to turn on the display again. DIMMER: If no button operation is performed for 30 seconds, the display will dim. Press a button to turn on the display again. This function is displayed in extended mode only. Note Setting the compander mode

(COMPANDER) Sets the operating mode of the compander. UWP-D: High speech quality mode supported in combination with UWP-D series devices. UWP: Mode supported in combination with Sony UWP-series tuners. WL800: Mode supported in combination with Sony 800-series tuners. Notes

This function is displayed in extended mode only.

No audio is output if the tone signal frequency is different due to the use of a combination of devices with different compander mode settings. Setting motion detection sensor mode

(OCUPNCY SENS) Sets whether to enable motion detection sensor mode using ultrasonic sound. When set to ON, a high-cut filter is activated to reduce noise. The factory default setting is OFF. Setting the battery type (BATTERY TYPE) You can set the type of battery being used in order to provide a more accurate battery level indication. TYPE1: Recommended setting when using alkaline LR6

(size AA) batteries. Indicates the battery level based on the characteristics of new Sony alkaline LR6 (size AA) batteries. TYPE2: Recommended setting when using rechargeable nickel metal hydride batteries. TYPE3: Recommended setting when using lithium batteries. This function is displayed in extended mode only. Setting the display brightness

(BRIGHTNESS) Adjusts the brightness of the OLED display using ten levels. The configurable values are given below.

(Dark) 1 2 3 4 5 6 7 8 9 10 (Bright) Note This function is displayed in extended mode only. Restoring factory default settings (FCT RESET) Restores all parameters to their factory default settings. Press and hold the SET button. A prompt appears asking you whether to restore factory default settings. Press the

+ or button to select YES, then press the SET button. The transmitter parameters are restored to their factory default settings. Notes

This function can be used in transmission stopped mode only.

After a reset, the audio input level is also restored to its factory default setting. Note that this may cause the volume on devices connected to the tuner and in headphones to suddenly change. Displaying the software version

(VERSION) Displays the software version of the transmitter. Note This function is displayed in extended mode only. 30 Transmitter Settings System Configuration Example The following is a configuration example for use with UWP-D series devices. Sample configuration for ENG (Electronic News Gathering) or EFP (Electronic Field Production) with a camcorder Portable diversity tuner (URX-P40)

(with shoe mount adapter attached) or or Plug-on transmitter

(UTX-P40) Hand-held microphone

(UTX-M40) Body-pack transmitter

(UTX-B40) 1 XLR-BMP conversion output cable (supplied) XDCAM EX/HDV camcorder

(HXR-NX3, etc.) System Configuration Example 31 Error Messages When a problem occurs, one of the following error messages may appear on the display. Message EEP ERROR An error has occurred in the backup memory data. Meaning PLL ERROR An error occurred in the PLL synthesizer circuit. NO TONE Audio signal output has been muted, because a tone signal different from the compander mode configured on the tuner was received. Solution Contact your point of purchase or Sony service representative. Restart the unit. If the message persists, contact your point of purchase or Sony service representative. Configure the appropriate compander mode based on the transmitters you are using Setting the compander mode (COMPANDER) (page 25). When operating in conjunction with UWP-D series transmitters (UTX-B40, UTX-M40, etc.), set the tuner and the transmitters to the same compander mode. 32 Error Messages Troubleshooting If you have any problem, use the following checklist before asking for repairs. If the problem persists, contact your point of purchase or Sony service representative. Symptom The unit does not turn on. Cause The 3 and # polarity orientation of the batteries is incorrect. The batteries are getting low. The battery terminals are dirty. The unit does not turn off. The batteries become drained quickly. Batteries are not inserted despite POWER SOURCE being set to BATT ONLY.3) The POWER/MUTE button is locked.5) The unit is set so that power cannot be turned on/

off using the POWER/MUTE button.6) The batteries are getting low. Manganese batteries are being used. The channel cannot be changed.1) There is no sound. The device is being used under cold conditions. The unit is not in transmission stopped mode. The channel setting on the transmitter is different from that on the tuner. The transmitter is not transmitting signals, or the transmission output is weak. The transmitter is set to line level input.2) The compander mode setting on the transmitter is different from that on the tuner. The transmitter is muted.1) Solution Insert the batteries with the correct polarity orientation. Replace the batteries with new ones. Clean the 3 and # terminals, and the battery compartment terminals4) with a cotton swab. Insert batteries, or change the POWER SOURCE setting. Release the locked status in the POWER LOCK menu. Set the POWER/MUTE menu to POWER/MUTE, or turn the unit off using the POWER button. Replace the batteries with new ones. Use alkaline batteries. The battery life of a manganese battery is less than half that of an alkaline battery. The batteries drain quickly under cold conditions. Turn off the unit, and then turn it on again while holding down the SET button to switch to transmission stopped mode. Use the same channel setting on both the transmitter and tuner. Confirm that the transmitter is turned on. Alternatively, reduce the distance between the transmitter and tuner. Switch to microphone input. Use the same compander mode setting on both the transmitter and tuner. Press the POWER/MUTE button on the transmitter to release the muted state. The MUTE SETTING menu (POWER/MUTE menu on the UTX-M40) is set to PTT HOLD. Change the setting. The attenuation level on the transmitter is too high. The input level of the transmitter is low. Set the attenuation of the transmitter to an appropriate level. Adjust the volume to an appropriate level. Switch to microphone input. The sound is weak. The sound is distorted. The volume on the amplifier or mixer is low. The transmitter is set to line level input.2) The compander mode setting on the transmitter is different from that on the tuner. The attenuation level on the transmitter is too low or is set to 0. The GAIN MODE menu of the transmitter is set to 15dB BOOST. The channel setting on the transmitter is different from that on the tuner. Headphones with a monaural mini jack are being used.3) Use the same compander mode setting on both the transmitter and tuner. The input level is extremely high. Set the attenuation on the transmitter so that the audio is not distorted. The input level is extremely high. Change the GAIN MODE setting so that the sound is not distorted. Use the same channel setting on both the transmitter and tuner. Use headphones with a stereo mini jack. Troubleshooting 33 Symptom The attenuator cannot be set. There is sound interruption or noise. Cause The GAIN MODE menu is set to AUTO GAIN, or the INPUT LEVEL menu is set to LINE. The channel setting on the transmitter is different from that on the tuner. Two or more transmitters are set to the same channel. The transmitters are not set to the channels within the same channel group. Adjacent channels are being used. Jamming radio waves are being received. The infrared receptor on the transmitter is too far from the infrared transmission port on the tuner. Interference from infrared communications between other devices or from direct sunlight is present. The RF indicator on the tuner lights up even when the transmitter is off. The transmitter channel cannot be set with infrared transmission.1) The transmitter channel cannot be set via NFC communication. The N-Marks of both units are not facing each other, or they are too far apart. Or there may be some metallic object between the N-Marks. The grip is open.6) Solution Change the GAIN MODE menu and INPUT LEVEL menu settings. Use the same channel setting on both the transmitter and tuner. Two or more transmitters cannot be used on the same channel. Refer to the frequency list stored on the supplied CD-ROM, and reconfigure the channel on each transmitter. The channel plan is set so that no signal interference occurs when two or more transmitters are used simultaneously. Set each transmitter to a different channel within the same channel group. Use the channels separated by at least two channels (250 kHz). Set the channel on the tuner to a channel for which the RF indicator does not light, or use the Clear Channel Scan function to switch to a channel without interference. Then, set the transmitter to the same channel as the tuner. If using two or more transmitters, change to a channel group that is not affected. Reduce the distance between the infrared receptor on the transmitter and the infrared transmission port on the tuner to within about 20 cm (8 in.). The transmitting distance is reduced when interference from strong sunlight, for example, is present. Place the transmitter and tuner as close to each other as possible. Place the N-Marks approximately 5 mm from each other. Make sure there are no metallic or other objects near them. 1) Body-pack transmitter (UTX-B40) / hand-held microphone (UTX-M40) / plug-on transmitter (UTX-P40) only 2) Body-pack transmitter (UTX-B40) / plug-on transmitter (UTX-P40) only 3) Portable diversity tuner (URX-P40) only 4) Body-pack transmitter (UTX-B40) / portable diversity tuner (URX-P40) only 5) Body-pack transmitter (UTX-B40) / plug-on transmitter (UTX-P40) / portable diversity tuner (URX-P40) only 6) Hand-held microphone (UTX-M40) only 34 Troubleshooting Important Notes on Use Specifications The NFC communication function is used only for communication between a transmitter and a tuner. It cannot be used for communication with other devices. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Usage and storage

Operating the UWP-D series devices near electrical equipment (motors, transformers, or dimmers) may cause interference due to electromagnetic induction. Keep the devices as far from such equipment as possible.

The presence of lighting equipment may produce electrical interference over a wide frequency range. In this case, interference may fluctuate with the position of the tuner antenna and position of the transmitter. Position the devices so that interference is minimized.

To avoid degradation of the signal to noise ratio, do not use UWP-D devices in noisy places or in locations subject to vibration, such as the following:

Near electrical equipment, such as motors, transformers, or dimmers Near air conditioning equipment or places subject to direct air flow from an air conditioner Near PA (public address) loudspeakers Near equipment that might knock against the tuner Keep devices as far from such equipment as possible or use buffering material. Cleaning Clean the surface and the connectors of devices with a dry, soft cloth. Never use thinners, benzene, alcohol, or any other chemicals, since these may mar the finish. To prevent electromagnetic interference Some channels may be unable to be used due to noise generated due to the effects of external noise and/or radio interference. In this case, it is recommended to stop transmitting (turn the power off) or change to another frequency (change channel). To prevent electromagnetic interference from portable communication devices The use of portable telephones and other communication devices near the devices may result in malfunction and interference with audio signals. It is recommended that portable communication equipment near the devices be turned off. Design and specifications are subject to change without notice. Notes

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.

SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND. Transmitter (UTX-B40/M40/P40) Items common to all transmitters Oscillator type Crystal-controlled PLL synthesizer Carrier frequencies 14UC model: 470 MHz to 542 MHz 25UC model: 536 MHz to 608 MHz 90U model: 941.625 MHz to 951.875 MHz, 953.000 MHz to 956.125 MHz, and 956.625 MHz to 959.625 MHz 21CE model: 470 MHz to 542 MHz 33CE model: 566 MHz to 630 MHz 42CE model: 638 MHz to 694 MHz 42LA model: 638 MHz to 698 MHz 38CN model: 710 MHz to 782 MHz KR model: 925 MHz to 937.5 MHz E model: 794 MHz to 806 MHz 50 s Preemphasis Reference frequency deviation 5 kHz (60 dBV, 1 kHz input) 0.9% or less (60 dBV, 1 kHz input) Distortion Signal-to-noise ratio 60 dB (60 dBV, 1 kHz input) 102 dB (GAIN MODE set to AUTO GAIN, max.) 96 dB (GAIN MODE set to NORMAL, max.) Important Notes on Use / Specifications 35 Voice delay Tone signal frequency 0.35 ms In UWP-D compander mode:

32.382 kHz In UWP compander mode: 32 kHz In WL800 compander mode:

32.768 kHz Supply voltage 3.0 V DC (two LR6/AA size alkaline batteries) 5.0 V DC (supplied from USB connector) Operating temperature 0 C to 50 C (32 F to 122 F) Storage temperature 20 C to +55 C (4 F to +131 F) Body-pack transmitter (UTX-B40) Antenna Audio input connector 1/4 wavelength wire antenna 3.5 mm diameter mini jack Reference audio input level 60 dBV (MIC input, GAIN MODE set to NORMAL, 0 dB attenuation) RF output level 30 mW/5 mW selectable (UC, U, CE, LA, CN models) 10 mW/2 mW selectable (E, KR models) Frequency response 40 Hz to 18 kHz 0 dB to 27 dB (3 dB steps) POWER, AUDIO/MUTE Attenuation Indicators Battery life (measured with two Sony LR6/AA size alkaline batteries at 25 C (77 F), DISPLAY MODE set to AUTO OFF) Approx. 8 hours with output power of 30 mW (UC, U, CE, LA, CN models) Approx. 10 hours with output power of 10 mW (E, KR models) Dimensions

) 8

/

7 2

(

3 7 63 (2 1/2) 19 (3/4) 63 73 19 mm (2 1/2 2 7/8 3/4 in.)

(width / height / depth)

(excluding antenna) 36 Specifications Mass Approx. 83 g (2.9 oz)

(excluding batteries) Lavalier microphone (ECM-V1BMP) Type Frequency response Electret condenser microphone Directivity Sensitivity 40 Hz to 20,000 Hz Omni-directional 43.0 dB 3 dB

(0 dB = 1 V/Pa, at 1 kHz) Operating temperature 0 C to 50 C (32 F to 122 F) Storage temperature Cable Dimensions Mass 20 C to +55 C (4 F to +131 F) 2.3 mm diameter, 2-conductor shielded cable, 1.2 m (3.9 feet) long 6.8 19.5 mm (9/32 25/32 in.)

(without cable and connector) Approx. 16.2 g (0.57 oz) Hand-held microphone (UTX-M40) Microphone unit Dynamic Unidirectional 1/4 wavelength wire antenna Directivity Antenna Reference audio input level 55 dBV (GAIN MODE set to NORMAL, 0 dB attenuation) RF output level 30 mW/5 mW selectable (UC, U, CE, LA, CN models) 10 mW/2 mW selectable (E, KR models) Frequency response 70 Hz to 18 kHz 0 dB to 21 dB (3 dB steps) POWER/MUTE Attenuation Indicator Battery life (measured with two Sony LR6/AA size alkaline batteries at 25 C (77 F), DISPLAY MODE set to AUTO OFF) Approx. 8 hours with output power of 30 mW (UC, U, CE, LA, CN models) Approx. 10 hours with output power of 10 mW (E, KR models) Dimensions 48 (1 15/16)

) 4

/

1 0 1

(

8 5 2 48 258 mm (1 15/16 10 1/4 in.)

(diameter / length) Mass Approx. 255 g (9.0 oz)

(excluding batteries) Tuner Plug-on transmitter (UTX-P40) Reference audio input level RF output level 60 dBV (MIC input, GAIN MODE set to NORMAL, 0 dB attenuation) 40 mW/5 mW selectable (UC, U, LA models) 30 mW/5 mW selectable (CE, CN models) 10 mW/2 mW selectable (E, KR Frequency response models) 50 Hz to 18 kHz 0 dB to 48 dB (3 dB steps) Attenuation Audio input connector XLR-3-11C type (female) POWER, AUDIO/MUTE, +48V Indicators Battery life (measured with two Sony LR6/AA size alkaline batteries at 25 C (77 F), DISPLAY MODE set to AUTO OFF) During +48V OFF:

Approx. 7 hours with output power of 40 mW (UC, U, LA models) Approx. 8 hours with output power of 30 mW (CE, CN models) Approx. 10 hours with output power of 10 mW (E, KR models) During +48V ON and ECM-673 connection:

Approx. 6 hours with output power of 40 mW (UC, U, LA models) Approx. 6 hours with output power of 30 mW (CE, CN models) Approx. 7 hours with output power of 10 mW (E, KR models) Dimensions

) 8

/

7 3

(

8 9

) 4

/

1 1

(

7 7

) 2

/

1 1

(

8 3 38 (1 1/2) 38 98 38 mm (1 1/2 3 7/8 1 1/2 in.)

(width / height / depth)

(including the audio input connector) Mass Approx. 139 g (4.9 oz)

(excluding batteries) Portable diversity tuner (URX-P40) 1/4 wavelength wire antenna Antenna

(angle-adjustable) Audio output level 60 dBV (3.5 mm diameter mini jack, analog output) 20 dBFS (external connection, digital output) 50 dBFS (external connection, analog Audio output connector output) 3.5 mm diameter mini jack, external connection Headphone output level 5 mW (16 ) Reception method True diversity method Local oscillator Crystal-controlled PLL synthesizer Receive frequencies 14UC model: 470 MHz to 542 MHz 25UC model: 536 MHz to 608 MHz 90U model: 941.625 MHz to 951.875 MHz, 953.000 MHz to 956.125 MHz, and 956.625 MHz to 959.625 MHz 21CE model: 470 MHz to 542 MHz 33CE model: 566 MHz to 630 MHz 42CE model: 638 MHz to 694 MHz 42LA model: 638 MHz to 698 MHz 38CN model: 710 MHz to 782 MHz KR model: 925 MHz to 937.5 MHz E model: 794 MHz to 806 MHz Signal-to-noise ratio 60 dB (1 kHz sine wave, 5 kHz modulation) Voice delay 0.35 ms (analog output) 0.24 ms (digital output) 50 s Deemphasis Reference frequency deviation 5 kHz Frequency response Distortion 40 Hz to 18 kHz 0.9% or less (1 kHz sine wave, 5 kHz Tone signal In UWP-D compander mode:

modulation) 32.382 kHz In UWP compander mode: 32 kHz In WL800 compander mode:

32.768 kHz Indicators Operating temperature POWER, RF 0 C to 50 C (32 F to 122 F) Storage temperature 20 C to +55 C (4 F to +131 F) Supply voltage 3.0 V DC (two LR6/AA size alkaline batteries) 5.0 V DC (supplied from USB connector) Specifications 37 Battery life Approx. 6 hours (measured with two Sony LR6/AA size alkaline batteries at 25 C (77 F), DISPLAY MODE set to AUTO OFF) Dimensions

) 8

/

7 2

(

0 7 63 (2 1/2) 31 (1 1/4) 63 70 31 mm (2 1/2 2 7/8 1 1/4 in.)

(width / height / depth)

(excluding antenna) Approx. 131 g (4.6 oz)

(excluding batteries) Mass 38 Specifications Sony Corporation

 

 

UTX-M40 Outline Front Rear UTX-M40 Outline Top Bottom UTX-M40 Outline Right Left

 

 

UTX-M40 Internal Structure <1>

Detached the Lower Grip. Detached the Microphone capsule. UTX-M40 Internal Structure <2>

Detached the Antenna cover. Detached the button frame. UTX-M40 Internal Structure <3>

Detached PWB AU-388. Detached the Upper Grip. UTX-M40 Internal Structure <4>

Detached the chassis. Detached PWB TX-174. UTX-M40 Internal Structure <5>

Side A of Board TX-174. UTX-M40 Internal Structure <6>

Side B of Board TX-174. UTX-M40 Internal Structure <7>

Side A of Board AU-388. UTX-M40 Internal Structure <8>

Side B of Board AU-388.