all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 797.68 KiB | / October 01 2008 | |||
1 | Cover Letter(s) | |||||||
1 | External Photos | / October 01 2008 | ||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | / October 01 2008 | ||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / October 01 2008 |
1 | User Manual | Users Manual | 797.68 KiB | / October 01 2008 |
3-280-224-11(1) Wireless Audio Receiver Operating Instructions Manual de instrucciones US ES DRC-BT15 2007 Sony Corporation 01US00COV-BT15_U2.p65 1 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:15 pm Black WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Excessive sound pressure from headphones can cause hearing loss. Information This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 2 US This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. 01US01TOC-BT15_U2.p65 2 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 5:24 pm Black For the customers in the USA RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries. Informations Cet appareil est conforme la section 15 de la rglementation FCC ainsi qu la RSS-
Gen de la rglementation IC. Son utilisation est autorise seulement aux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris des interfrences susceptibles de compromettre le fonctionnement de lappareil. Vous devez savoir que tout changement ou toute modification non expressment approuv dans ce mode demploi risque dannuler votre pouvoir dutiliser cet appareil. Cet quipement est conforme aux limitations concernant lexposition aux radiations tablies par la FCC/IC dfinies dans un environnement non contrl ainsi quaux directives relatives lexposition aux frquences radio (RF) FCC du supplment C du bulletin OET65 et au rglement RSS- 102 relatif lexposition aux radiofrquences
(RF) IC. Cet quipement prsente des niveaux dnergie RF trs bas considrs comme conformes et ne ncessite pas de test du dbit dabsorption spcifique (SAR). Table Of Contents What is Bluetooth wireless technology? .................. 4 Welcome! .......................... 5 3 steps to Bluetooth function .... 6 Location and Function of Parts ............................... 7 Charging the unit ............. 8 Pairing ............................. 10 What is pairing? ...................... 10 Procedures of pairing .............. 10 Wearing the unit ............. 12 Indications of Bluetooth function ....................... 14 Listening to music ......... 15 Controlling the audio device AVRCP ............................... 16 Calling ............................. 17 Controlling the Bluetooth mobile phone HFP, HSP .............. 19 Calling while playing back music .................. 20 Disposing of the unit ..... 21 Precautions .................... 22 Troubleshooting ............. 24 Initializing the unit ......... 26 Specifications ................. 27 US 3 US 01US01TOC-BT15_U2.p65 3 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:16 pm Black What is Bluetooth wireless technology?
Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide. Communication System and Compatible Bluetooth Profiles of this unit Profile is standardization of the function for each Bluetooth device specification. This unit supports the following Bluetooth version and profiles:
Communication System :
Bluetooth Specification version 2.0 +
EDR*1 Compatible Bluetooth Profiles:
A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality. AVRCP (Audio Video Remote Control Profile): Controlling A/V equipment;
pausing, stopping, starting playback, volume control, etc. HSP (Headset Profile)*2: Talking on the phone/Operating the phone. HFP (Hands-free Profile)*2: Talking on the phone/Operating the phone by hands-free.
*1 Enhanced Data Rate
*2 When you use a Bluetooth mobile phone supported by both HFP (Hands-
free Profile) and HSP (Headset Profile), set to HFP. Notes To be able to use the Bluetooth function, the Bluetooth device to be connected requires the same profile as the units. Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of Bluetooth wireless technology, the sound played on this unit is slightly delayed from the sound played on the Bluetooth device during talking on the telephone or listening to the music. 4 US 01US02FEA-BT15_U2.p65 4 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:16 pm Black Welcome!
Thank you for purchasing this Sony Wireless Audio Receiver. This unit uses Bluetooth wireless technology. Enjoy music wirelessly from Bluetooth technology-enabled music players, or mobile phones.*1 Connect your favorite headphones via stereo mini jack (headphones are sold separately). Talk hands-free with Bluetooth technology-enabled mobile phones.*2 Do basic remote control operation (play, stop, etc.) of music player functions via Bluetooth connection.*3 Bluetooth version 2.0 + EDR (Enhanced Data Rate) for higher quality audio with less interference and lower power consumption. Useful rechargeable function. For details on Bluetooth wireless technology, see page 4. Talking on the phone Listening to music
*1 The connected Bluetooth device is required to support A2DP (Advanced Audio Distribution Profile).
*2 The connected Bluetooth device is required to support HFP (Hands-free Profile) or HSP (Headset Profile).
*3 The connected Bluetooth device is required to support AVRCP (Audio Video Remote Control Profile). 5 US 01US02FEA-BT15_U2.p65 5 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:16 pm Black 3 steps to Bluetooth function Pairing First, register (pair) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth mobile phone, etc. Pairing VListening to music Bluetooth connection Operate the Bluetooth device to make the Bluetooth connection. Wireless Audio Receiver c Page 10 - 11 VCalling Bluetooth connection When the unit is turned on, the unit starts making the Bluetooth connection to the recognized mobile phone automatically. A2DP Connection AVRCP V c Page 15 Listening to music You can listen to music played on the Bluetooth device. Playback, stop, or pause is possible from this unit. Connection HFP HSP c Page 17 - 18 V Talking on the phone You can make and receive a call by operating this unit. Music c Page 15 - 16 c Page 18 - 20 Voice 6 US 01US02FEA-BT15_U2.p65 6 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:16 pm Black GETTING STARTED Location and Function of Parts 1 2 3 9 q;
7 8 4 5 6 VOL
. x N
. VOL PO W ER qa 1 Headphones jack 2 Strap hole 3 Clip hole 4 Indicator (red) Indicates the power status of the unit. 5 Microphone 6 Multi function button Controls various call functions. 7 Indicator (blue) Indicates the communication status of the unit. 8 Jog switch Controls various functions when listening to music. Adjust the volume of the unit when talking over the telephone. 9 RESET button 0 Contact point qa POWER button 7 US 01US03GET-BT15_U2.p65 7 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black Charging the unit The unit contains a rechargable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied 3 Put the unit on the AC power adaptor with the battery charging stand. Battery charging stand (supplied)
(Rear) battery charging stand. Wireless Audio Receiver D C IN 3 V To DC IN 3 V jack Contact pin Battery charging stand (supplied) AC power adaptor (supplied) 2 Connect the supplied AC power adaptor to an AC outlet. To an AC outlet Rest the unit on the battery charging stand so that the units contact point meets the contact pin on the battery charging stand, and make sure that the indicator
(red) lights up. Charging is completed in about 2.5 hours* and the indicator (red) goes off automatically.
* Time required for empty battery to recharge. Note When you attach the strap to this unit, do not let the strap get caught between the unit and the battery charging stand. Battery charging stand (supplied) Tips If the AC power adaptor is connected to an AC outlet while the unit is turned on, the unit will be turned off automatically. This unit cannot be turned on while charging. 8 US 01US03GET-BT15_U2.p65 8 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black Caution If this unit detects a problem while charging, the indicator (red) may turn off, although charging is not complete. Check for the following causes:
Ambient temperature exceeds the range of 0 C 40 C (32 F 104 F). There is a problem with the battery. In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer. Notes If the battery is not used for a long time, battery may be quickly depleted, however, after a few recharges, battery life will improve. If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery. Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave in a car parked in the sun. Use only the supplied AC power adaptor. Do not use any other AC power adaptor. Usage hours*
Status Communication time (including music playback time) (up to) Standby time
(up to) Approx. usage hours 6 hours 100 hours
* Time stated above may vary, depending on ambient temperature or conditions of use. Checking the remaining battery When pressing the POWER button while the unit is turned on, the indicator (red) flashes. You can check the remaining battery by the number of times the indicator (red) flashes. Indicator (red) 3 times 2 times 1 time Status Full Mid Low (needs to charge) Note You cannot check the remaining battery immediately after the unit is turned on, or while pairing. When the battery is almost empty The indicator (red) flashes slowly automatically. When the battery becomes empty, a beep sounds and the unit will turn off automatically. 9 US 01US03GET-BT15_U2.p65 9 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black Pairing What is pairing?
Bluetooth devices need to be paired with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases:
Pairing information is deleted after repair, etc. This unit is paired with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. When recognition of the unit by the device to be connected is deleted. This unit is initialized (page 26). All pairing information is deleted. Procedures of pairing 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and hold the POWER button for 7 seconds or more to standby for pairing while the unit is turned off. Notes After about 3 seconds, power is turned on and the indicator (blue) and indicator (red) flash together twice. Keep the POWER button pressed without releasing. The indicator (blue) starts flashing. When both indicators start flashing together again, release the button. This unit enters into pairing mode. If pairing is not established within about 5 minutes, pairing mode will be cancelled and this unit will turn off. In this case, start over from step 1. 10 US 01US03GET-BT15_U2.p65 10 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black 6 Start the Bluetooth connection from the Bluetooth device. This unit memorizes the device as the last connected device. Some Bluetooth devices may connect with the unit automatically when pairing is complete. Tips To pair with other Bluetooth devices, repeat steps 1 to 5 for each device. To delete all pairing information, see Initializing the unit (page 26). 3 Perform pairing procedure on the Bluetooth device to detect this unit. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as DRC-BT15. If DRC-BT15 is not displayed, repeat from step 1. Notes For details, refer to the operating instructions supplied with the Bluetooth device. When pairing with a Bluetooth device that cannot display a list of detected devices or that has no display, you may pair the device by setting both this unit and the Bluetooth device to pairing mode. At this time, if passcode is set besides 0000 on the Bluetooth device, pairing cannot be done with this unit. 4 Select DRC-BT15 on the display of the Bluetooth device. 5 If Passcode* input is required on the display of a Bluetooth device, input 0000. Pairing is complete when the indicator (blue) flashes slowly. The message standing for Pairing complete appears on the display of some Bluetooth devices.
* Passcode may be called Passkey, PIN code, PIN number, or Password. 11 US 01US03GET-BT15_U2.p65 11 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black Wearing the unit When using the clip 1 While pinching the lever at the end of the clip
(supplied), hold the clip across the unit as shown, then insert the clip into the clip hole. Lever 2 While pinching the lever, turn the unit counterclockwise. When the lever is released, the clip is locked to prevent it from coming off. 3 Connect the headphones (not supplied) to this unit. 4 Clip this unit to a pocket, etc., of your clothes and then wear the headphones. Wear the earphone marked L in your left ear, and the one marked R in your right ear. 12 US 01US03GET-BT15_U2.p65 12 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 3:48 pm Black When using the strap 1 Attach the strap (not supplied) to this unit through the strap hole. 3 Place this unit around your neck and then wear the headphones. Wear the earphone marked L in your left ear, and the one marked R in your right ear. 2 Connect the headphones (not supplied) to the unit. 13 US 01US03GET-BT15_U2.p65 13 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black Indications of Bluetooth function Status Flashing patterns B : Indicator (blue) R : Indicator (red) Searching Connectable Connecting B R
... .. .. B R B R
... .. HFP/HSP or A2DP B
(standby for receiving audio signal)R HFP/HSP and A2DP B
(standby for receiving audio signal)R
... .. Listening B R Listening during standby B for telephone call R Incoming call Talking B R B R Calling while playing back music R B
... .. .. .. .. g n i r i a P g n i t c e n n o C d e t c e n n o C c i s u M e n o h P 14 US 01US03GET-BT15_U2.p65 14 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:19 pm Black OPERATING THE UNIT Listening to music Jog switch VOL
. Nx VOL POWER button Check the following before operating the unit. The Bluetooth device is turned on. Pairing of this unit and the Bluetooth device is complete. The Bluetooth device supports the transmitting music function
(profile: A2DP*). 1 Press and hold the POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice and the unit is turned on. Notes Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered. After the unit is turned on, the unit attempts to connect to the last connected Bluetooth device automatically with HFP or HSP. When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 20. 2 Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit. Refer to the operating instructions supplied with the Bluetooth device on how to operate it. 3 Start playback on the Bluetooth device. Tip Bluetooth connection of A2DP
(Advanced Audio Distribution Profile) can also be operated with the jog switch from this unit to the Bluetooth device except when making a call on this unit. Notes When you play music by connecting the unit to a Bluetooth device using HSP
(Headset Profile), sound quality will not be high. For better sound, change the Bluetooth connection to A2DP by operating the Bluetooth device. If this unit is turned off while an A2DP Bluetooth connection is established, operate the unit again from step 1 to make the A2DP Bluetooth connection again.
* For detail on profiles, see page 4. Continued 15 US 01US04OPE-BT15_U2.p65 15 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black To adjust the volume Push the jog switch up or down while listening to music to adjust the volume. Tips Depending on the connected device, it may be necessary to adjust the volume on the connected device as well. Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. To stop use 1 Terminate the Bluetooth connection by operating the Bluetooth device. 2 Press and hold the POWER button for about 3 seconds. The indicator (blue) and indicator (red) light up together, and the unit turns off. Tip When you finish playing music, the Bluetooth connection may terminate automatically, depending on the Bluetooth device. Controlling the audio device AVRCP If the Bluetooth audio device connected with this unit supports AVRCP (Audio Video Remote Control Profile), you can control by using the unit buttons. Refer to the operating instructions supplied with the Bluetooth device on how to operate it. Note Operation of the Bluetooth connecting device by this unit will vary depending on its specification. Status: In stop or pause mode Short Press Long Press Nx 1 2 4 3
1 Starts playback*1 2 Stop 3 Skip to next/previous 4 Fast-forward/Fast-rewind*2 Status: In play mode Short Press Long Press Nx 5 6 8 7
5 Pause*1 6 Stop 7 Skip to next/previous 8 Fast-forward/Fast-rewind*2
*1 You may need to press the button twice depending on the Bluetooth device.
*2 Some Bluetooth devices may not operate. Note You cannot adjust the volume of the Bluetooth device by pushing the jog switch of this unit up or down. 16 US 01US04OPE-BT15_U2.p65 16 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Calling Jog switch VOL
. Nx VOL POWER button Multi function button Check the following before operating the unit. The Bluetooth function is active on the mobile phone. Pairing of this unit and the Bluetooth mobile phone is complete. 1 Press and hold the POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice, the unit turns on and then this unit tries to connect to the last Bluetooth mobile phone that was used. Note Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered. Tip This unit will stop trying to connect to the Bluetooth mobile phone after 1 minute. In such a case, press the multi function button to try to connect again. When this unit does not connect to a Bluetooth mobile phone automatically You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. A To make a connection by operating Bluetooth mobile phone 1 Make the Bluetooth connection (HFP or HSP*) from the Bluetooth mobile phone to this unit. Refer to the manual supplied with your Bluetooth mobile phone for operation details. The list of recognized devices appears on the display of the Bluetooth mobile phone. This unit is displayed as DRC-BT15. When you use the Bluetooth mobile phone features both HFP
(Hands-free Profile) and HSP
(Headset Profile), set to HFP. Note When connecting to a Bluetooth mobile phone which is different from the last connected one, make the connection following the above procedure.
* For details on profiles, see page 4. Continued 17 US 01US04OPE-BT15_U2.p65 17 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black B To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. The indicator (blue) and indicator (red) start flashing at the same time, and the unit performs the connection operation for about 5 seconds. Note When listening to music with this unit, a Bluetooth connection cannot be made with the multi function button. To call 1 Use the buttons on your mobile phone when making a call. If no dial tone is heard on this unit, press and hold the multi function button for about 2 seconds. Tip You can call in the following way, depending on the Bluetooth mobile phone. Refer to the manual supplied with your mobile phone on operating details. When not communicating, you can call using the voice-dial function by pressing the multi function button. You can call the last dialed number by pressing the multi function button for about 2 seconds. To receive a call When an incoming call arrives, a ring tone will be heard from the unit. 1 Press the multi function button on the unit. The ring tone differs in the following ways, depending on your mobile phone. 18 US ring tone set on the unit ring tone set on the mobile phone ring tone set on the mobile phone only for Bluetooth connection Note If you received a call by pressing the button on the Bluetooth mobile phone, some Bluetooth mobile phones may have handset use priority. In this case, set to talk with the unit by pressing and holding the multi function button for about 2 seconds, or by operating the Bluetooth mobile phone. For details, refer to the manual supplied with your Bluetooth mobile phone. To adjust the volume Push the jog switch up or down to adjust the volume. Tips You cannot adjust the volume when not communicating. Volume for calling and listening to music can be adjusted independently. Even if you change the volume while playing back the music, the volume of a call does not change. To terminate a call You can end a call by pressing the multi function button on the unit. To stop use 1 Terminate Bluetooth connection by the Bluetooth mobile phone. 2 Press and hold the POWER button for about 3 seconds to turn off the power. The indicator (blue) and indicator (red) light up together, and the unit turns off. 01US04OPE-BT15_U2.p65 18 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black
*1 Some functions may not be supported depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with your mobile phone.
*2 This may vary, depending on the Bluetooth mobile phone.
*3 Some functions may not be supported when calling using the Bluetooth mobile phone. Controlling the Bluetooth mobile phone HFP, HSP The operation of the buttons on this unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP
(Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate. HFP (Hands-free Profile) Status Multi function button Short Press Start Voice Long Press Last number Standby Dial*1 redial Voice Dial active Outgoing call Cancel Voice Dial*1 End outgoing Incoming call During call call Answer End call Reject Change call device HSP (Headset Profile) Status Multi function button Short Press Long Press Standby Dial*1 Outgoing call End outgoing call*1 Incoming call During call Answer End call*3 End outgoing call or change call device to headset*2 Change call device to headset 19 US 01US04OPE-BT15_U2.p65 19 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, this unit needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between this unit and the device in use following the procedures outlined below. 1 Make a Bluetooth connection between this unit and the mobile phone in use with HFP or HSP following the procedures outlined in Calling (see page 17). 2 Operate the Bluetooth device (music player or mobile phone) used for playing the music to make a Bluetooth connection to this unit using A2DP. To make a call while playing back music 1 Press the multi function button while playing back music (page 19), or operate your Bluetooth mobile phone to make a telephone call. If no dial tone is heard on this unit, press and hold the multi function button for about 2 seconds. To receive a call while playing back music When an incoming call arrives, the music pauses and the ring tone is heard from this unit. 1 Press the multi function button and talk. After finishing the call, press the multi function button. This unit is switched back to music playback. When no ring tone is heard even if an incoming call arrives 1 Stop music playback. 2 When ringing, press the multi function button and talk. 20 US 01US04OPE-BT15_U2.p65 20 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black ADDITIONAL INFORMATION Disposing of the unit A Lithium-lon rechargeable battery is built into this unit. For environmental conservation, be sure to remove the built-in rechargeable battery from the unit before disposing, and dispose of the battery appropriately. 1 Remove the screws 3 Pull out the connector.
(2 pieces) on the back of this unit. Dispose of the rechargeable battery without removing it from the cover. 2 Lift the side with the strap hole to remove the cover. Rechargable battery Note Do not remove the rechargeable battery from the cover, the rechargeable battery could be destroyed. 21 US 01US05ADD-BT15_U2.p65 21 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black If this unit is used within 10 m (about 30 ft) of a wireless LAN device, turn off the wireless LAN device. Install this unit and Bluetooth device as near to each other as possible. Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or a petrol station near automatic doors or a fire alarm This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, Inc. and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. While talking on the phone hands free, noise may occur, depending on the device or communication environment. Depending on the device to be connected, it may require some time to start communication. Precautions On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment. The antenna is built into the unit as illustrated in the dotted line. The sensitivity of the Bluetooth communication will improve by turning the direction of the built-in antenna to the connected Bluetooth device. The communication distance shortens when the obstacles are between the antenna of the connected device and this unit. Location of built-in antenna The following conditions may affect the sensitivity of Bluetooth communication. There is an obstacle such as a human body, metal, or wall between this unit and Bluetooth device. A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit. Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following. Use this unit at least 10 m (about 30 ft) away from the wireless LAN device. 22 US 01US05ADD-BT15_U2.p65 22 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black On the supplied AC power adaptor Use the AC power adaptor supplied with this unit. Do not use any other AC power adaptor since it may cause the unit to malfunction. Polarity of the plug If you are not going to use this unit for a long time, unplug the AC power adaptor from the AC outlet. To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself;
never pull the cord. Others Do not place this unit in a place exposed to humidity, dust, soot or steam, subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a malfunction. Do not use the strap in a place where the strap could be snagged, such as near a shredder or machine equipment. Using the Bluetooth device may not function on mobile phones, depending on radio wave conditions and location where the equipment is being used. If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. Listening with this unit at high volume may affect your hearing. For traffic safety, do not use this unit while driving or cycling. Do not put weight or pressure on this unit as it may cause the unit to deform during long storage. If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer. 23 US 01US05ADD-BT15_U2.p65 23 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. Common The unit is not turned on.
, Charge the battery of the unit.
, The unit is not turned on while charging. Remove the unit from the battery charging stand and then turn on the unit. Pairing cannot be done.
, Bring this unit and the Bluetooth device closer together. Cannot make the Bluetooth connection.
, Check that this unit is turned on.
, Check that the Bluetooth connecting device is turned on and the Bluetooth function is on.
, Connection with the Bluetooth device may not be memorized on this unit. Make the Bluetooth connection from the Bluetooth device to this unit soon after pairing is complete.
, This unit or Bluetooth connecting device is in sleep mode.
, The Bluetooth connection is terminated. Make the Bluetooth connection again (when listening to music: see page 15, when calling: see page 17). Distorted sound
, Ensure that this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven. 24 US The correspondence distance is short. (Sound skips.)
, If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources.
, Point the antenna of this unit
(page 22) towards the Bluetooth device. Make sure no obstacles blocks the communication. The unit does not operate properly.
, Reset the unit. Pairing information is not deleted by this operation. Insert a small pin, etc., into the hole, and push until you feel a click. When listening to music No sound
, Check that both this unit and the Bluetooth device are turned on.
, A2DP Bluetooth connection is not made between this unit and the Bluetooth device. Make an A2DP Bluetooth connection (page 15).
, Check that music is being played back by the Bluetooth device. 01US05ADD-BT15_U2.p65 24 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black
, Check that the volume of the unit is not set too low.
, Turn up the volume on the connected device if necessary.
, Pair this unit and Bluetooth device again (page 10). Low sound level
, Turn up the volume of this unit.
, Turn up the volume on the connected device if necessary. Low sound quality
, Switch the Bluetooth connection to A2DP (Advanced Audio Distribution Profile) when HSP (Headset Profile) is set. Cannot make the Bluetooth connection from Bluetooth device to this unit.
, The Bluetooth device is not equipped with SCMS-T content protection*. With the unit turned off, press and hold POWER and Nx for about 7 seconds to deactivate the SCMS-T protection. The indicator (blue) flashes once.
* The SCMS-T content protection method is one of the methods to protect the contents transmitted on the Bluetooth wireless technology. This unit can receive the contents protected by this method. Press and hold the POWER button and Nx again for about 7 seconds to reactivate the SCMS-T content protection method on this unit. The indicator (blue) flashes twice. Sound skips frequently during playback.
, Reception condition of this unit may have become unstable due to improper matching of the bit-rate setting for the music transmitted from the Bluetooth device and the environment in which this unit is used. *1 Terminate A2DP Bluetooth connection by operating the Bluetooth device. While this unit is turned on, press and hold Nx for about 7 seconds to lower the setting of receivable bit rate. *2
*1 Bit rate is a numerical value which represents data transmission volume per second. The higher the bit rate, in general, the better quality the sound will be. This unit can receive high bit rate music but sound skipping may occur depending on the usage environment.
*2 When bit rate setting is completed, the indicator (blue) flashes once. The above operations may not reduce the sound skip depending on the usage environment. To reset to the original setting, press and hold Nx again for about 7 seconds. The indicator (blue) flashes twice. When calling The recipients voice cannot be heard.
, Check that both this unit and the Bluetooth mobile phone are turned on.
, Check the connection between this unit and the Bluetooth mobile phone. Make a Bluetooth connection (HFP or HSP) again (page 17).
, Check that output of the Bluetooth mobile phone is set for this unit.
, Check that the volume of the unit is not set too low.
, Turn up the volume on the connected Bluetooth mobile phone if necessary.
, If you are listening to music using this unit, stop playback, press the multi function button and talk. Low sound from recipient
, Turn up the volume of this unit.
, Turn up the volume on the connected Bluetooth mobile phone if necessary. 25 US 01US05ADD-BT15_U2.p65 25 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Initializing the unit You can reset this unit to its default
(such as volume setting) and delete all pairing information. 1 If this unit is turned on, press and hold the POWER button for about 3 seconds to turn off this unit. 2 Press and hold the POWER button and multi function button together for about 7 seconds. The indicator (blue) and indicator (red) flash together four times, and this unit is reset to the default setting. All pairing information is deleted. 26 US 01US05ADD-BT15_U2.p65 26 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Specifications General Communication System Bluetooth Specification version 2.0 +
EDR (Enhanced Data Rate) Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft) *1 Frequency band 2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method FHSS Compatible Bluetooth Profiles*2 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HSP (Headset Profile) HFP (Hands-free Profile) Supported Codecs*3 SBC*4, MP3 Supported content protection method SCMS-T Transmission range (A2DP) 20 - 20,000 Hz (Sampling frequency 44.1 kHz) Supplied accessory AC power adaptor (1) Battery charging stand (1) Holding clip (1) Operating instructions (this book) (1) Recommended accessories Headphones: MDR-EX90LP
(not supplied)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerials performance, operating system, software application, etc.
*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.
*3 Codec: Audio signal compression and conversion format
*4 Subband Codec Wireless Audio Receiver Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Dimension (w/h/d) (excluding projection parts and controls) Approx. 16.8 68.5 15.5 mm
(11/16 2 3/4 5/8 in.) Mass (excluding accessories) Approx. 15 g (0.5 oz) Headphones output Output jack Stereo mini jack Maximum output 20 mW + 20 mW (16 ) Microphone Type Electret condenser Direction characteristic Omni directional Effective frequency range 100 4,000 Hz Operating temperature 0 C to 45 C (32 F to 113 F) Design and specifications are subject to change without notice. 27 27 US 01US05ADD-BT15_U2.p65 27 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:20 pm Black Informacin Se le advierte de que la realizacin de cambios o modificaciones no aprobados explcitamente en este manual pueden anular su autoridad para utilizar este equipo. El equipo no debe colocarse ni utilizarse junto con ninguna otra antena o transmisor. La marca de la palabra Bluetooth y sus logotipos son propiedad de Bluetooth SIG, Inc. y cualquier uso de los mismos por parte de Sony Corporation se realiza bajo licencia. Las dems marcas y nombres comerciales pertenecen a sus respectivos propietarios. Tecnologa de codificacin de audio MPEG Layer-3 y patentes bajo licencia de Fraunhofer IIS y Thomson. ADVERTENCIA Para reducir el riesgo de incendios o electrocucin, no exponga el aparato a la lluvia ni a la humedad. Para evitar descargas elctricas, no abra la unidad. En caso de avera, solicite los servicios de personal cualificado. No site el aparato en un espacio cerrado, como una estantera o un armario empotrado. Para reducir el riesgo de incendios, no cubra la ventilacin del aparato con peridicos, manteles, cortinas, etc. ni coloque velas encendidas encima del mismo. Para reducir el riesgo de incendio o sacudida elctrica, no ponga objetos que contengan lquido, tal como floreros, encima del aparato. Conecte el adaptador de alimentacin de ca a una toma de ca de fcil acceso. Si percibe alguna anormalidad en el adaptador de alimentacin de ca, desconctelo inmediatamente de la toma de ca. No exponga las pilas (la batera o las pilas instaladas) a fuentes de calor excesivo como luz solar, fuego o similar durante un perodo prolongado. Una presin acstica excesiva de los auriculares puede provocar prdidas auditivas. 2 ES 03ES01TOC_BT15_U2.p65 2 Black 23/10/07, 2:20 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Para clientes de los EE UU RECYCLADO DE BATERIAS DE IONES DE LITIO Las bateras de iones de litio son reciclables. Usted podr ayudar a conservar el medio ambiente devolviendo las bateras usadas al punto de reciclaje mas cercano. Para ms informacin sobre el reciclado de bateras, llame al nmero gratuito 1-800-822-8837, o visite http://www.rbrc.org/
Precaucin: No utilice bateras de iones de litio daadas o con fugas. ndice Qu es la tecnologa inalmbrica Bluetooth? .................... 4 Bienvenido ........................ 5 Funcionamiento del dispositivo Bluetooth en slo 3 pasos ..... 6 Ubicacin y funcin de los componentes ................ 7 Carga de la unidad ........... 8 Emparejamiento ............. 10 Qu es el emparejamiento? ... 10 Procedimientos de emparejamiento .................. 10 Utilizacin de la unidad .......................... 12 Indicaciones de la funcin Bluetooth ..................... 14 Escuchar msica ........... 15 Control de audio del dispositivo AVRCP ............................ 16 Realizacin de llamadas ...................... 17 Control del telfono mvil Bluetooth HFP y HSP ..... 19 Realizacin de llamadas durante la reproduccin de msica .................... 20 Desecho de la unidad .... 21 Precauciones .................. 22 Solucin de problemas ... 24 Inicializacin de la unidad .......................... 26 Especificaciones ............ 27 ES 3 ES 03ES01TOC_BT15_U2.p65 3 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:20 pm AVRCP (Audio Video Remote Control telfono/Uso del telfono mediante la funcin de manos libres. Profile): Control del equipo de A/V;
pausa, detencin, inicio de la reproduccin, control de volumen, etc. HSP (Headset Profile)*2: Hablar por telfono/Funcionamiento del telfono. HFP (Hands-free Profile)*2: Hablar por Perfiles Bluetooth compatibles:
A2DP (Advanced Audio Distribution Profile): Transmisin o recepcin de contenido de audio de alta calidad. Qu es la tecnologa inalmbrica Bluetooth?
Bluetooth es una tecnologa inalmbrica de corto alcance que permite la comunicacin inalmbrica de datos entre dispositivos digitales como, por ejemplo, un ordenador o una cmara digital. La tecnologa inalmbrica Bluetooth funciona en un rango de aproximadamente 10 metros. Lo habitual es conectar dos dispositivos, pero algunos dispositivos admiten la conexin a varios dispositivos a la vez. No es necesario utilizar un cable para realizar la conexin, ni tampoco es necesario encarar los dispositivos entre s, como sucede con la tecnologa de infrarrojos. Por ejemplo, puede utilizar los dispositivos en una bolsa o en un bolsillo. El estndar Bluetooth es una convencin internacional reconocida y utilizada por miles de empresas de todo el mundo. Sistema de comunicacin y perfiles Bluetooth compatibles de la unidad Un perfil es una estandarizacin de la funcin para cada especificacin del dispositivo Bluetooth. Esta unidad es compatible con el perfil y la versin Bluetooth siguientes:
Sistema de comunicacin:
Especificacin Bluetooth versin 2.0 +
EDR*1 mejorada. Debido a las caractersticas de la el dispositivo Bluetooth que desea conectar debe tener el mismo perfil que la unidad. Tenga en cuenta tambin que aunque exista el mismo perfil, el funcionamiento de los dispositivos puede variar dependiendo de las especificaciones de estos. tecnologa inalmbrica Bluetooth, el sonido que se reproduce en esta unidad sufre un ligero retardo respecto al sonido que se reproduce en el dispositivo Bluetooth cuando se habla por telfono o se escucha msica. Bluetooth compatible con las funciones HFP (Hands-free Profile) y HSP (Headset Profile), ajstelo en HFP. Notas Para poder utilizar la funcin Bluetooth,
*1 Velocidad de transmisin de datos
*2 Cuando utilice un telfono mvil 4 ES 03ES02FEA_BT15_U2.p65 4 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Bienvenido Gracias por adquirir este receptor de audio inalmbrico de Sony. Esta unidad utiliza la tecnologa inalmbrica Bluetooth. Disfrute de msica sin cables con reproductores con capacidad para utilizar la tecnologa Bluetooth o telfonos mviles.*1 Conecte sus auriculares favoritos a travs de la minitoma estreo (los auriculares se venden por separado). Disfrute de las conversaciones de manos libres con telfonos mviles con capacidad para utilizar la tecnologa Bluetooth.*2 Controle las funciones bsicas del mando a distancia (reproduccin, detencin, etc.) del reproductor de msica a travs de la conexin Bluetooth.*3 Bluetooth versin 2.0 + EDR (Enhanced Data Rate, velocidad de transmisin de datos mejorada) para ofrecer audio de calidad superior con menos interferencias y menor consumo de energa. Prctica funcin de recarga. Para obtener ms informacin sobre la tecnologa inalmbrica Bluetooth, consulte la pgina 4. Hablando por telfono Escuchar msica
*1 El dispositivo Bluetooth conectado debe ser compatible con el perfil A2DP
(Advanced Audio Distribution Profile).
*2 El dispositivo Bluetooth conectado debe ser compatible con el perfil HFP (Hands-free Profile) o HSP (Headset Profile).
*3 El dispositivo Bluetooth conectado debe ser compatible con el perfil AVRCP
(Audio Video Remote Control Profile). 5 ES 03ES02FEA_BT15_U2.p65 5 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Funcionamiento del dispositivo Bluetooth en slo 3 pasos Emparejamiento En primer lugar, registre (empareje) un dispositivo Bluetooth (telfono mvil, etc.) y esta unidad entre s. Una vez que se haya establecido el emparejamiento, no ser necesario volver a realizarlo. Telfonos mviles Bluetooth, etc. Receptor de audio inalmbrico Emparejamiento c Pginas 10 - 11 VEscuchar msica Conexin Bluetooth Utilice el dispositivo Bluetooth para realizar la conexin Bluetooth. VRealizar llamadas Conexin Bluetooth Cuando la unidad se enciende, sta empieza a realizar la conexin Bluetooth con el telfono mvil reconocido automticamente. A2DP Conexin AVRCP V Escuchar msica Es posible escuchar msica reproducida en el dispositivo Bluetooth. Esta unidad permite las operaciones de reproduccin, detencin e insercin de una pausa. c Pgina 15 Conexin HFP HSP c Pginas 17 - 18 V Hablar por telfono Puede realizar y recibir llamadas mediante esta unidad. Msica Voz c Pginas 15 - 16 c Pginas 18 - 20 6 ES 03ES02FEA_BT15_U2.p65 6 Black 23/10/07, 3:48 pm DRC-BT15_U2 [ES] 3-280-224-11(1) PROCEDIMIENTOS INICIALES Ubicacin y funcin de los componentes 1 2 3 9 q;
7 8 4 5 6 VOL
. x N
. VOL PO W ER qa 8 Interruptor de desplazamiento Controla varias funciones cuando se escucha msica. Ajuste el volumen de la unidad cuando hable por telfono. 9 Botn RESET 0 Punto de contacto qa Botn POWER 1 Toma de auriculares 2 Orificio para la correa 3 Orificio para el clip 4 Indicador (rojo) Indica el estado de la alimentacin de la unidad. 5 Micrfono 6 Botn multifuncin Controla varias funciones de llamada. 7 Indicador (azul) Indica el estado de la comunicacin de la unidad. 7 ES 03ES03GET_BT15_U2.p65 7 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Carga de la unidad La unidad contiene una batera de iones de litio recargable, que se debe cargar antes de utilizarla por primera vez. 1 Conecte el adaptador de alimentacin de ca suministrado con el soporte de carga de la batera. 3 Coloque la unidad en el soporte de carga de la batera. Receptor de audio inalmbrico Soporte de carga de la batera
(sumininstrado)
(Parte posterior) D C IN 3 V a la toma DC IN 3 V Pin de contacto Soporte de carga de la batera
(suministrado) Adaptador de alimentacin de ca (suministrado) 2 Conecte el adaptador de alimentacin de ca suministrado a una toma de corriente de ca. a una toma de ca Soporte de carga de la batera (suministrado) 8 ES Coloque la unidad sobre el soporte de carga de la batera de modo que el punto de contacto de la unidad coincida con el pin de contacto de dicho soporte y asegrese de que el indicator
(rojo) se ilumona. La carga se completa transcurridas aproximadamente 2.5 horas* y el indicador (rojo) se apaga automticamente.
* Tiempo necesario para volver a cargar una batera agotada. Nota Cuando coloque la correa en la unidad, procure que no quede atrapada entre la unidad y el soporte de carga de la batera. 03ES03GET_BT15_U2.p65 8 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Sugerencias Si el adaptador de alimentacin de ca est conectado a una toma de ca mientras la unidad est encendida, sta se apagar automticamente. Esta unidad no puede encenderse mientras se est cargando. Precaucin Si la unidad detecta un problema durante la carga, es posible que el indicador (rojo) se apague aunque no haya finalizado la carga. Compruebe si se debe a las causas siguientes:
La temperatura ambiental excede la gama entre los 0 C y los 40 C. La batera tiene un problema. En este caso, crguela de nuevo entre las temperaturas indicadas anteriormente. Si el problema persiste, pngase en contacto con el distribuidor Sony ms cercano. Notas Si no se utiliza la batera durante un perodo de tiempo prolongado, es posible que la carga se agote rpidamente. Sin embargo, despus de varias recargas, aumentar la duracin. Si la vida til de la batera recargable incorporada disminuye hasta la mitad de la duracin normal, la batera deber reemplazarse. Para reemplazar la batera recargable, pngase en contacto con el distribuidor Sony ms cercano. Evite la exposicin de la unidad a temperaturas extremas, la luz solar directa, la humedad, la arena, el polvo o los golpes. No la deje nunca en un automvil estacionado al sol. Utilice nicamente el adaptador de alimentacin de ca suministrado. No utilice ningn otro adaptador de alimentacin de ca. Duracin*
Estado Tiempo de comunicacin
(incluido el tiempo de reproduccin de msica) (mximo) Tiempo en espera
(mximo) Duracin aproximada 6 horas 100 horas
* Estos tiempos pueden variar segn la temperatura ambiente o las condiciones de uso. Comprobacin de la batera restante Si pulsa el botn POWER mientras la unidad est encendida, el indicador (rojo) parpadear. Puede comprobar la batera restante mediante el nmero de veces que parpadea el indicador (rojo). Indicador (rojo) 3 veces 2 veces 1 vez Estado Completa Media Baja (debe cargarla) Nota No puede comprobar la carga restante inmediatamente despus de encender la unidad o durante el emparejamiento. Cuando la batera est prcticamente agotada El indicador (rojo) parpadea lentamente de forma automtica. Cuando la batera se agota por completo, suena un pitido y la unidad se apaga automticamente. 9 ES 03ES03GET_BT15_U2.p65 9 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Emparejamiento Qu es el emparejamiento?
Los dispositivos Bluetooth deben emparejarse previamente entre s. Una vez que los dispositivos Bluetooth se han emparejado, no es necesario volver a hacerlo excepto en los casos siguientes:
La informacin de emparejamiento se elimina tras una reparacin, etc. La unidad est emparejada con 9 dispositivos o ms. Esta unidad se puede emparejar hasta con 8 dispositivos; si se empareja un noveno dispositivo, ste reemplazar al ms antiguo de los 8 restantes. Cuando se elimina el reconocimiento de la unidad en el dispositivo que desea conectar. Se ha inicializado esta unidad
(pgina 26). Se elimina toda la informacin de emparejamiento. Procedimientos de emparejamiento 1 Coloque el dispositivo Bluetooth a menos de 1 metro de esta unidad. 2 Mantenga pulsado el botn POWER durante ms de 7 segundos para poner en espera el emparejamiento mientras la unidad se desconecta. Notas Transcurridos 3 segundos, la alimentacin se enciende y los indicadores (azul) y (rojo) parpadean juntos dos veces. Mantenga pulsado el botn POWER. El indicador (azul) empieza a parpadear. Cuando ambos indicadores comiencen a parpadear juntos, suelte el botn. La unidad pasa al modo de emparejamiento. 10 ES 03ES03GET_BT15_U2.p65 10 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) 5 Si se solicita la introduccin de una contrasea* en la pantalla del dispositivo Bluetooth, introduzca 0000. El emparejamiento finaliza cuando el indicador (azul) parpadea lentamente. En la pantalla de algunos dispositivos Bluetooth aparece un mensaje que indica emparejamiento finalizado.
* La contrasea puede denominarse clave de acceso, cdigo PIN, nmero PIN o cdigo de acceso. 6 Inicie la conexin Bluetooth desde el dispositivo Bluetooth. La unidad memoriza este dispositivo como el ltimo al que se ha conectado. Es posible que algunos dispositivos Bluetooth se conecten automticamente a esta unidad al finalizar el emparejamiento. Sugerencias Para realizar un emparejamiento con otros dispositivos Bluetooth, repita los pasos del 1 al 5 para cada dispositivo. Para eliminar toda la informacin de emparejamiento, consulte Inicializacin de la unidad
(pgina 26). Si el emparejamiento no se ha establecido en unos 5 minutos, el modo de emparejamiento se cancelar y la unidad se apagar. En tal caso, vuelva a comenzar desde el paso 1. 3 Realice el procedimiento de emparejamiento en el dispositivo Bluetooth para que detecte esta unidad. La lista de los dispositivos detectados aparecer en la pantalla del dispositivo Bluetooth. Esta unidad se muestra como DRC-BT15. Si no aparece DRC-BT15, repita el procedimiento desde el paso 1. Notas Para obtener ms informacin, consulte el manual de instrucciones que se suministra junto con el dispositivo Bluetooth. Cuando realice el emparejamiento con un dispositivo Bluetooth que no pueda mostrar una lista de dispositivos detectados o no disponga de pantalla, puede emparejar el dispositivo mediante el ajuste de la unidad y del dispositivo Bluetooth en modo de emparejamiento. En este momento, si la clave de acceso no est ajustada en 0000 en el dispositivo Bluetooth, no es posible emparejar la unidad. 4 Seleccione DRC-BT15 en la pantalla del dispositivo Bluetooth. 11 ES 03ES03GET_BT15_U2.p65 11 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Utilizacin de la unidad Si utiliza el clip 1 Mientras sujeta la palanca del extremo del clip (suministrado), sujete el clip en la unidad como se muestra y, a continuacin, insrtelo en el orificio. 3 Conecte los auriculares
(no suministrados) a la unidad. 4 Culguese la unidad en un bolsillo o similar de alguna prenda de ropa y, a continuacin, pngase los auriculares. Pngase el auricular con la marca L en la oreja izquierda y el auricular con la marca R en la derecha. Palanca 2 Mientras sujeta la palanca, gire la unidad en el sentido contrario a las agujas del reloj. Cuando suelte la palanca, el clip quedar bloqueado para evitar que se desprenda. 12 ES 03ES03GET_BT15_U2.p65 12 Black 25/10/07, 11:37 am DRC-BT15_U2 [ES] 3-280-224-11(1) Si utiliza la correa 1 Fije la correa (no suministrada) en la unidad a travs del orificio para la correa. 3 Psese la unidad alrededor del cuello y, a continuacin, pngase los auriculares. Pngase el auricular con la marca L en la oreja izquierda y el auricular con la marca R en la derecha. 2 Conecte los auriculares
(no suministrados) a la unidad. 13 ES 03ES03GET_BT15_U2.p65 13 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Indicaciones de la funcin Bluetooth B : Indicador (azul) R : Indicador (rojo) Estado Patrones de parpadeo o t n e i m a j e r a p m E n i x e n o C a d i c e l b a t s e n i x e n o C a c i s M o n o f l e T Bsqueda B R
... .. Conexiones disponibles En proceso de conexin B R B R
... .. .. HFP/HSP o A2DP
(en espera para recibir seal de audio) B R
... HFP/HSP y A2DP
(en espera para recibir seal de audio) B R
... Escucha Escucha durante tiempo de espera para llamada de telfono Llamada entrante Conversacin Realizacin de llamadas durante la reproduccin de msica B R B R B R B R B R
... .. .. .. .. 14 ES 03ES03GET_BT15_U2.p65 14 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) USO DE LA UNIDAD Escuchar msica Interruptor de desplazamiento VOL
. Nx VOL Botn POWER Antes utilizar la unidad, compruebe los puntos siguientes. El dispositivo Bluetooth est encendido. Ha finalizado el emparejamiento de esta unidad y el dispositivo Bluetooth. El dispositivo Bluetooth admite la funcin de transmisin de msica
(perfil: A2DP*). 1 Con la unidad apagada, mantenga pulsado el botn POWER durante aproximadamente 3 segundos. Los indicadores (azul) y (rojo) parpadean dos veces juntos y la unidad se enciende. Notas No debe mantener pulsado el botn POWER durante ms de 7 segundos, en ese caso, la unidad pasar al modo de emparejamiento. Una vez activada la unidad, sta intenta conectarse automticamente al ltimo dispositivo Bluetooth al que se conect con HFP o HSP. Cuando no realice llamadas con la unidad, no deje el ltimo dispositivo Bluetooth conectado preparado para realizar una conexin HFP o HSP. Para realizar o recibir llamadas mientras escucha msica, consulte la pgina 20. 2 Realice la conexin Bluetooth (A2DP) desde un dispositivo Bluetooth a esta unidad. Consulte el manual de instrucciones suministrado con el dispositivo Bluetooth para saber como realizarla. 3 Inicie la reproduccin del dispositivo Bluetooth. Sugerencia La conexin Bluetooth de A2DP
(Advanced Audio Distribution Profile) tambin se puede realizar utilizando el interruptor de desplazamiento de esta unidad al dispositivo Bluetooth excepto cuando se haga una llamada a dicha unidad. Notas Cuando reproduzca msica mediante la conexin de la unidad a un dispositivo Bluetooth con HSP (Headset Profile), la calidad del sonido no ser alta. Para una mejor calidad de sonido, cambie la conexin Bluetooth a A2DP utilizando el dispositivo Bluetooth. Si se apaga la unidad cuando se ha establecido una conexin Bluetooth A2DP, vuelva a ponerla en funcionamiento desde el paso 1 para realizar de nuevo la conexin Bluetooth A2DP.
* Para obtener ms informacin sobre los perfiles, consulte la pgina 4. Contina 15 ES 03ES04OPE_BT15_U2.p65 15 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm Para ajustar el volumen Presione el interruptor de desplazamiento hacia arriba o hacia abajo mientras escucha msica para ajustar el volumen. Sugerencias En funcin del dispositivo que conecte, es posible que tambin deba ajustar el volumen en dicho dispositivo. El volumen para realizar llamadas y escuchar msica se puede ajustar de forma independiente. Aunque modifique el volumen mientras realiza una llamada, el volumen de la reproduccin de msica no variar. Para detener el uso 1 Para finalizar la conexin Bluetooth haga funcionar el dispositivo Bluetooth. 2 Mantenga pulsado el botn POWER durante unos 3 segundos. Los indicadores (azul) y (rojo) se iluminan a la vez y la unidad se apaga. Sugerencia Cuando finalice la reproduccin de msica, es posible que la conexin Bluetooth finalice automticamente, segn el dispositivo Bluetooth que se utilice. Control de audio del dispositivo AVRCP Si el dispositivo de audio Bluetooth conectado con esta unidad admite AVRCP (Audio Video Remote Control Profile), podr controlarlo mediante los botones de la unidad. 16 ES Consulte el manual de instrucciones suministrado con el dispositivo Bluetooth para saber como realizarla. Nota La utilizacin del dispositivo Bluetooth que desea conectar variar dependiendo de las especificaciones. Estado: En modo de detencin o de pausa Pulsar Mantener pulsado 1 3 2 4 Nx
1 Inicia la reproduccin*1 2 Parada 3 Saltar a la siguiente/a la anterior 4 Avance/rebobinado rpido*2 Estado: En modo de reproduccin Pulsar 5 Mantener pulsado 6 Nx 8 7
5 Pausa*1 6 Parada 7 Saltar a la siguiente/a la anterior 8 Avance/rebobinado rpido*2
*1 Es posible que necesite pulsar el botn dos veces segn el dispositivo Bluetooth.
*2 Es posible que algunos dispositivos Bluetooth no funcionen. Nota Para ajustar el volumen del dispositivo Bluetooth, no puede presionar el interruptor de desplazamiento hacia arriba o hacia abajo. 03ES04OPE_BT15_U2.p65 16 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Realizacin de llamadas Interruptor de desplazamiento VOL
. Nx VOL Botn POWER Botn multifuncin Antes de utilizar la unidad, compruebe los puntos siguientes. La funcin Bluetooth est activada en el telfono mvil. Ha finalizado el emparejamiento de esta unidad y el telfono mvil Bluetooth. 1 Con la unidad apagada, mantenga pulsado el botn POWER durante aproximadamente 3 segundos. Los indicadores (azul) y (rojo) parpadean juntos dos veces, la unidad se enciende y, a continuacin, sta intenta conectarse automticamente al ltimo telfono mvil Bluetooth que se ha usado. Nota No debe mantener pulsado el botn POWER durante ms de 7 segundos, en ese caso, la unidad pasar al modo de emparejamiento. Sugerencia Esta unidad dejar de intentar establecer conexin con el telfono mvil Bluetooth transcurrido 1 minuto. En ese caso, pulse el botn multifuncin para intentar conectar de nuevo. Si la unidad no se conecta a un telfono mvil Bluetooth automticamente Puede realizar una conexin utilizando el telfono mvil Bluetooth o esta unidad para conectarse al ltimo dispositivo Bluetooth al que se ha conectado. A Para usar el telfono mvil Bluetooth para realizar la conexin 1 Realice la conexin Bluetooth (HFP o HSP*) desde el telfono mvil Bluetooth a esta unidad. Para obtener ms informacin sobre el procedimiento a seguir, consulte el manual suministrado con el telfono mvil Bluetooth. La lista de dispositivos reconocidos aparecer en la pantalla del telfono mvil Bluetooth. Esta unidad aparece como DRC-BT15. Cuando utilice las funciones HFP
(Hands-free Profile) y HSP
(Headset Profile) del telfono mvil Bluetooth, ajstelo en HFP. Nota Si desea conectarse con un telfono mvil Bluetooth distinto del que se conect la ltima vez, siga el procedimiento anterior.
* Para obtener ms informacin sobre los perfiles, consulte la pgina 4. Contina 17 ES 03ES04OPE_BT15_U2.p65 17 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:21 pm B Para usar esta unidad para realizar una conexin con el ltimo dispositivo Bluetooth al que se ha conectado 1 Pulse el botn multifuncin de la unidad. Los indicadores (azul) y (rojo) empiezan a parpadear a la vez y la unidad realiza la conexin durante unos 5 segundos. Nota No es posible establecer una conexin Bluetooth con el botn multifuncin mientras se escucha msica en esta unidad. Para llamar 1 Utilice los botones del telfono mvil para realizar llamadas. Si la unidad no emite ningn tono de llamada, mantenga pulsado el botn multifuncin durante unos 2 segundos. Sugerencia Puede realizar llamadas de la manera siguiente, dependiendo del telfono mvil Bluetooth que utilice. Para obtener ms informacin sobre el funcionamiento, consulte el manual suministrado con el telfono mvil Bluetooth. Cuando se realicen comunicaciones, podr llamar utilizando la funcin de marcacin por voz si pulsa el botn multifuncin. Para llamar al ltimo nmero marcado, pulse el botn multifuncin durante unos 2 segundos. 18 ES Para recibir una llamada Al recibir una llamada entrante, oir un tono de llamada de la unidad. 1 Pulse el botn multifuncin de la unidad. El tono de llamada vara de las formas siguientes, dependiendo del telfono mvil. tono de llamada ajustado en la unidad tono de llamada ajustado en el telfono mvil tono de llamada ajustado en el telfono mvil slo para la conexin Bluetooth Nota Si puls el botn del telfono mvil Bluetooth para recibir una llamada, tenga en cuenta que es probable que algunos telfonos tengan activada la prioridad para utilizar el telfono. En este caso, ajstelo para hablar con la unidad manteniendo pulsado el botn multifuncin durante unos 2 segundos o bien realice el ajuste desde el telfono mvil Bluetooth. Para obtener ms informacin, consulte el manual suministrado con el telfono mvil Bluetooth. Para ajustar el volumen Presione el interruptor de desplazamiento hacia arriba o hacia abajo para ajustar el volumen. Sugerencias No puede ajustar el volumen cuando no se realicen comunicaciones. El volumen para realizar llamadas y escuchar msica se puede ajustar de forma independiente. Aunque modifique el volumen mientras reproduce msica, el volumen de la llamada no variar. 03ES04OPE_BT15_U2.p65 18 Black 23/10/07, 2:21 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Para finalizar una llamada Para finalizar una llamada puede presionar el botn multifuncin de la unidad. Para detener el uso 1 Termine las comunicaciones Bluetooth en el telfono mvil. 2 Para apagar la alimentacin de la unidad, mantenga pulsado el botn POWER durante unos 3 segundos. Los indicadores (azul) y (rojo) se iluminan a la vez y la unidad se apaga. Control del telfono mvil Bluetooth HFP y HSP En espera Llamada saliente El uso de los botones de esta unidad vara dependiendo del telfono mvil que utilice. Para efectuar el emparejamiento con un telfono mvil Bluetooth se utiliza el perfil HFP (Hands-free Profile) o HSP (Headset Profile). Consulte el manual de instrucciones suministrado junto con el telfono mvil para obtener informacin sobre los perfiles Bluetooth admitidos y cmo funcionan. HFP (Hands-free Profile) Estado Botn multifuncin Pulsar Mantener pulsado Repite la marcacin del ltimo nmero En espera Activa la marcacin por voz Llamada saliente Inicia la marcacin por voz*1 Cancela la marcacin por voz*1 Fin de la llamada saliente Llamada entrante Durante la llamada Responde a la Rechaza la llamada Finaliza la llamada llamada Cambio de dispositivo de llamada HSP (Headset Profile) Estado Botn multifuncin Pulsar Mantener pulsado Marcacin*1 Fin de la llamada saliente*1 Fin de la llamada saliente o cambio del dispositivo de llamada a los auriculares*2 Responde a la Llamada entrante Durante la llamada llamada Finaliza la llamada*3 Cambio del dispositivo de llamada a los auriculares
*1 Es posible que algunas funciones no se admitan dependiendo del telfono mvil Bluetooth. Consulte las instrucciones de uso suministradas con su telfono mvil.
*2 Puede variar en funcin del telfono mvil Bluetooth utilizado.
*3 Es posible que algunas funciones no se admitan cuando se realice una llamada mediante el telfono mvil Bluetooth. 19 ES 03ES04OPE_BT15_U2.p65 19 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm Realizacin de llamadas durante la reproduccin de msica La conexin Bluetooth con HFP o HSP, as como con A2DP, es necesaria para realizar una llamada mientras reproduce msica. Por ejemplo, para realizar una llamada con un telfono mvil Bluetooth mientras escucha msica en un reproductor de msica compatible con Bluetooth, esta unidad debe estar conectada al telfono mvil con HFP o HSP. Para realizar una conexin Bluetooth entre esta unidad y el dispositivo que utiliza, siga el procedimiento que se describe a continuacin. 1 Realice una conexin Bluetooth entre esta unidad y el telfono mvil que utiliza con HFP o HSP a travs de los procedimientos que se describen en Realizacin de llamadas (consulte la pgina 17). 2 Utilice el dispositivo Bluetooth (reproductor de msica o telfono mvil) que utiliza para reproducir msica para realizar una conexin Bluetooth con esta unidad mediante A2DP. Para realizar una llamada mientras escucha msica 1 Pulse el botn multifuncin durante la reproduccin de msica
(pgina 19) o utilice el telfono mvil Bluetooth para hacer una llamada. Si la unidad no emite ningn tono de llamada, mantenga pulsado el botn multifuncin durante unos 2 segundos. Para recibir una llamada mientras escucha msica Al recibir una llamada entrante, la msica se detendr y se oir un tono de llamada de la unidad. 1 Pulse el botn multifuncin de la unidad y hable. Cuando termine la llamada, pulse el botn multifuncin. La unidad vuelve a reproducir la msica. Si no se oye el tono de llamada al recibir una llamada entrante 1 Detenga la reproduccin de msica. 2 Cuando suene el tono, pulse el botn multifuncin de la unidad y hable. 20 ES 03ES04OPE_BT15_U2.p65 20 Black 23/10/07, 2:22 pm DRC-BT15_U2 [ES] 3-280-224-11(1) INFORMACIN COMPLEMENTARIA Desecho de la unidad Esta unidad dispone de una batera recargable de iones de litio incorporada. Para una mejor conservacin del medio ambiente, asegrese de retirar la batera recargable incorporada antes de deshacerse de la unidad y proceda al desecho de dicha batera de la forma adecuada. 1 Extraiga los tornillos
(2 unidades) de la parte posterior de la unidad. 3 Tire del conector. Deseche la batera recargable sin sacarla de la tapa. 2 Levante el lado que contiene el orificio para la correa para extraer la tapa. Batera recargable Nota No retire la batera recargable de la tapa, ya que podra estropearse. 21 ES 03ES05ADD_BT15_U2.p65 21 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm Precauciones Comunicacin Bluetooth La tecnologa inalmbrica Bluetooth funciona en un rango de aproximadamente 10 metros. El rango mximo de comunicacin puede variar en funcin de los obstculos (persona, objetos metlicos, paredes, etc.) o del entorno electromagntico. La antena est incorporada en la unidad como se muestra con la lnea de puntos. La sensibilidad de la comunicacin Bluetooth mejorar al girar la antena incorporada en la unidad hacia el dispositivo Bluetooth connectado. La distancia de comunicacin se reduce cuando existen obstculos entre la antena del dispositivo conectado y esta unidad. Ubicacin de la antena incorporada Las condiciones siguientes pueden afectar la sensibilidad de la comunicacin Bluetooth. La existencia de obstculos como, por ejemplo, una persona, un objeto metlico o una pared entre esta unidad y el dispositivo Bluetooth. El uso de dispositivos que utilicen una frecuencia de 2,4 GHz como, por ejemplo, un dispositivo LAN inalmbrico, un telfono inalmbrico o un microondas cerca de la unidad. Como los dispositivos Bluetooth y las LAN inalmbricas (IEEE802.11b/g) utilizan la misma frecuencia, pueden producirse interferencias de microondas que provoquen el deterioro de la velocidad de la comunicacin, la aparicin de ruido o una conexin no vlida si la unidad se utiliza cerca de un dispositivo LAN inalmbrico. En este caso, realice el procedimiento siguiente. Utilice esta unidad a una distancia mnima de 10 m del dispositivo LAN inalmbrico. Si utiliza esta unidad a menos de 10 m de un dispositivo LAN inalmbrico, apague el dispositivo LAN inalmbrico. Instale esta unidad y el dispositivo Bluetooth a la distancia ms corta posible entre s. Las microondas que emite un dispositivo Bluetooth pueden afectar el funcionamiento de dispositivos mdicos electrnicos. Apague esta unidad y los dems dispositivos Bluetooth en los lugares siguientes, ya que podran provocar un accidente:
donde exista gas inflamable, en un hospital, tren, avin o gasolinera cerca de puertas automticas o alarmas de incendios Esta unidad admite capacidades de seguridad que cumplen con el estndar Bluetooth para proporcionar una conexin segura al utilizar la tecnologa inalmbrica Bluetooth, pero es posible que la seguridad no sea suficiente segn el ajuste. Tenga cuidado al realizar una comunicacin con la tecnologa inalmbrica Bluetooth. No se aceptan responsabilidades por la prdida de informacin que pudiera producirse durante una comunicacin Bluetooth. 22 ES 03ES05ADD_BT15_U2.p65 22 Black 23/10/07, 2:22 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Otros No coloque esta unidad en lugares expuestos a humedad, polvo, holln, vapor o luz solar directa, ni la deje en un automvil en espera ante una seal de trfico. Se pueden producir fallos de funcionamiento. No utilice la correa en un lugar donde pueda quedar atrapada, como una desfibradora, una instalacin de maquinaria, etc. Es posible que el dispositivo Bluetooth no funcione en telfonos mviles dependiendo del estado de las ondas de radio y del lugar donde se utilice el equipo. Si no se siente cmodo despus de utilizar el dispositivo Bluetooth, deje de utilizarlo inmediatamente. Si el problema persiste, consulte con el distribuidor Sony ms cercano. Si usa la unidad a un volumen alto, puede sufrir daos en los odos. Por razones de seguridad vial, no la utilice mientras conduce o va en bicicleta. No coloque ningn peso ni ejerza presin sobre la unidad, ya que sta podra deformarse durante perodos de almacenamiento prolongado. Si desea realizar alguna consulta o solucionar algn problema relativo a la unidad que no se trate en este manual, pngase en contacto con el distribuidor Sony ms cercano a su domicilio. No se puede garantizar la conexin con todos los dispositivos Bluetooth. Un dispositivo que disponga de la funcin Bluetooth debe cumplir el estndar Bluetooth especificado por Bluetooth SIG, Inc. y estar autenticado. Incluso en el caso de que el dispositivo conectado cumpla el estndar Bluetooth mencionado anteriormente, es posible que algunos dispositivos no puedan conectarse o funcionar correctamente, segn las caractersticas o las especificaciones del dispositivo. Mientras est hablando con el manos libre del telfono, puede producirse ruido, segn el dispositivo o el entorno de comunicacin. En funcin del dispositivo que vaya conectarse, es posible que transcurra cierto tiempo antes de que se inicie la comunicacin. Adaptador de alimentacin de ca suministrado Utilice solamente el adaptador de alimentacin de ca suministrado con esta unidad. No utilice ningn otro adaptador de alimentacin de ca, ya que puede causar un mal funcionamiento de la unidad. Polaridad de la clavija Si no va a utilizar la unidad durante un perodo prolongado de tiempo, desconecte el adaptador de alimentacin de ca de la toma de ca. Para retirar el adaptador de alimentacin de ca de la toma de corriente de pared, tire del adaptador, nunca del cable. 23 ES 03ES05ADD_BT15_U2.p65 23 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm Solucin de problemas Si tiene dificultades para utilizar esta unidad, srvase de la siguiente lista de comprobaciones y consulte la informacin de ayuda del producto en nuestro sitio Web. Si el problema persiste, consulte con el distribuidor Sony ms cercano. El sonido aparece distorsionado.
, Asegrese de que la unidad no est recibiendo interferencias de una red LAN inalbrica, de algn otro dispositivo inalmbrico de 2,4 GHz ni de un microondas. La distancia de correspondencia es demasiado corta. (Se producen saltos del sonido.)
, Si hay cerca un dispositivo que genera radiacin electromagntica como, por ejemplo, una LAN inalmbrica, otro dispositivo Bluetooth o un microondas, aleje la unidad de estas fuentes.
, Oriente la antena de la unidad (pgina 22) hacia el dispositivo Bluetooth. Asegrese de que ningn obstculo bloquea la comunicacin. La unidad no funciona correctamente.
, Reinicie la unidad. La informacin de los pares no se borra con esta operacin. Inserte un pequeo pasador, etc., en el orificio con cierto ngulo y empuje hasta escuchar un chasquido. Comn La unidad no est encendida.
, Cargue la batera de la unidad.
, La unidad no est encendida mientras se carga. Retire la unidad del soporte de carga de batera y encindala. No se puede llevar a cabo el emparejamiento.
, Acerque esta unidad y el dispositivo Bluetooth. No se ha realizado la conexin Bluetooth.
, Compruebe que la unidad est encendida.
, Compruebe que el dispositivo Bluetooth que desea conectar est encendido y que la funcin Bluetooth est activada.
, Es posible que la unidad no memorice la conexin con el dispositivo Bluetooth. Realice la conexin Bluetooth del dispositivo Bluetooth a la unidad inmediatamente despus de finalizar el emparejamiento.
, Esta unidad o el dispositivo Bluetooth que desea conectar est en modo en espera.
, Ha finalizado la conexin Bluetooth. Realice la conexin Bluetooth de nuevo (cuando escuche msica:
consulte la pgina 15 y cuando realice llamadas: consulte la pgina 17). 24 ES 03ES05ADD_BT15_U2.p65 24 Black 23/10/07, 2:22 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Al escuchar msica No hay sonido
, Compruebe que tanto la unidad como el dispositivo Bluetooth estn encendidos.
, No se ha establecido la conexin Bluetooth A2DP entre la unidad y el dispositivo Bluetooth. Realice una conexin Bluetooth A2DP (pgina 15).
, Compruebe que se reproduce msica en el dispositivo Bluetooth.
, Compruebe que el volumen de la unidad no est demasiado bajo.
, Si es necesario, suba el volumen del dispositivo conectado.
, Vuelva a emparejar la unidad y el dispositivo Bluetooth (pgina 10). El nivel del sonido es bajo
, Suba el volumen de la unidad.
, Si es necesario, suba el volumen del dispositivo conectado. Sonido de baja calidad
, Cambie la conexin Bluetooth a A2DP (Advanced Audio Distribution Profile) cuando se ajuste HSP
(Headset Profile). No es posible realizar una conexin Bluetooth desde un dispositivo Bluetooth a esta unidad.
, El dispositivo Bluetooth no dispone de proteccin de contenido SCMS-T*. Mantenga pulsado el botn POWER y Nx durante unos 7 segundos para desactivar la proteccin SCMS-T mientras la unidad est apagada. El indicador
(azul) parpadear una vez.
* El sistema de proteccin de contenido SCMS-T es uno de los mtodos de proteccin de contenidos transmitidos mediante la tecnologa inalmbrica Bluetooth. Esta unidad est preparada para recibir contenido protegido por este sistema. Mantenga pulsado el botn POWER y Nx otra vez durante unos 7 segundos para activar de nuevo el sistema de proteccin de contenido SCMS-T en la unidad. El indicador (azul) parpadear dos veces. Se producen saltos frecuentes en el sonido durante la reproduccin.
, Es posible que la recepcin de la unidad se haya vuelto inestable debido a que los ajustes de la velocidad de bits de la msica transmitida no corresponden a los del dispositivo Bluetooth y el entorno en que se utiliza la unidad. *1 Finalice la conexin Bluetooth A2DP mediante el dispositivo Bluetooth. Con la unidad encendida, mantenga pulsado Nx durante aproximadamente 7 segundos para reducir la velocidad de bits. *2
*1 La velocidad de bits es un valor numrico que expresa el volumen de transmisin de datos por segundo. Como norma general, cuanto ms alta sea la velocidad de bits, mejor ser la calidad del sonido. Esta unidad est preparada para recibir msica con una alta velocidad de bits; no obstante, es posible que se produzcan saltos en el sonido en funcin del entorno en que se utilice. Contina 25 ES 03ES05ADD_BT15_U2.p65 25 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm Inicializacin de la unidad Puede restablecer la unidad a la configuracin predeterminada (as como el volumen) y eliminar la informacin de emparejamiento. 1 Si la unidad est encendida, mantenga pulsado el botn POWER durante unos 3 segundos para apagarla. 2 Mantenga pulsados los botones POWER y multifuncin a la vez durante unos 7 segundos. Los indicadores (azul) y (rojo) parpadearn juntos cuatro veces y la unidad se restablecer a los ajustes predeterminados. Toda la informacin de emparejamiento se elimina.
*2 Cuando se completa el ajuste de velocidad de bits, el indicador
(azul) parpadea una vez. En funcin del entorno en que se utilice la unidad, es posible que las operaciones anteriores no reduzcan los saltos en el sonido. Para restablecer los ajustes originales, mantenga pulsado Nx de nuevo durante unos 7 segundos. El indicador (azul) parpadear dos veces. Al realizar llamadas No se escucha la voz del destinatario de la llamada.
, Compruebe que tanto la unidad como el telfono mvil Bluetooth estn encendidos.
, Compruebe la conexin de la unidad con el telfono mvil Bluetooth. Vuelva a realizar una conexin Bluetooth (HFP o HSP) (pgina 17).
, Compruebe que la salida del telfono mvil Bluetooth est ajusta para esta unidad.
, Compruebe que el volumen de la unidad no est demasiado bajo.
, Si es necesario, aumente el volumen del telfono mvil Bluetooth conectado.
, Si escucha msica en la unidad, detenga la reproduccin, pulse el botn multifuncin y hable. El sonido del destinatario de la llamada es bajo
, Suba el volumen de la unidad.
, Si es necesario, aumente el volumen del telfono mvil Bluetooth conectado. 26 ES 03ES05ADD_BT15_U2.p65 26 Black 23/10/07, 2:22 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Especificaciones Generales Sistema de comunicacin Especificacin Bluetooth versin 2.0 +
EDR (Velocidad de transmisin de datos mejorada) Salida Clase de potencia 2 de especificacin Bluetooth Rango de comunicacin mximo Lnea de vista de aprox. 10 m*1 Banda de frecuencia Banda de 2,4 GHz (2,4000 GHz 2,4835 GHz) Mtodo de modulacin FHSS Perfiles Bluetooth compatibles*2 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HSP (Headset Profile) HFP (Hands-free Profile) Cdecs admitidos*3 SBC*4, MP3 Sistema de proteccin de contenido admitido SCMS-T Intervalo de transmisin (A2DP) 20 20.000 Hz (frecuencia de muestreo de 44,1 kHz) Accesorio suministrado Adaptador de alimentacin de ca (1) Soporte de carga de la batera (1) Clip de sujecin (1) Manual de instrucciones
(este documento) (1) Accesorios recomendados Auriculares: MDR-EX90LP
(no suministrados)
*1 El rango real variar en funcin de factores como, por ejemplo, los obstculos que puedan interponerse entre los dispositivos, los campos magnticos que puedan existir en torno a hornos microondas, la electricidad esttica, interferencias, las condiciones de las ondas radioelctricas, la sensibilidad de recepcin o el rendimiento de la antena, del sistema operativo, de la aplicacin de software, etc.
*2 Los perfiles estndar Bluetooth indican la finalidad de la comunicacin Bluetooth entre dispositivos.
*3 Cdec: formato de conversin y compresin de seales de audio
*4 Cdec de banda secundaria Receptor de audio inalmbrico Fuente de alimentacin cc de 3,7 V: batera recargable de iones de litio incorporada Dimensiones (an/al/prf) (sin incluir partes y controles salientes) Aprox. 16,8 68,5 15,5 mm Masa (sin incluir los accesorios) Aprox. 15 g Salida de auriculares Toma de salida Minitoma estreo Potencia de salida mxima 20 mW + 20 mW (16 ) Micrfono Tipo Condensador de electreto Caractersticas de direccin Omnidireccional Gama de frecuencia efectiva 100 4.000 Hz Temperatura de funcionamiento De 0 C a 45 C El diseo y las especificaciones estn sujetos a cambios sin previo aviso. 27 ES 03ES05ADD_BT15_U2.p65 27 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm 03ES05ADD_BT15_U2.p65 29 Black DRC-BT15_U2 [ES] 3-280-224-11(1) 23/10/07, 2:22 pm 03ES05ADD_BT15_U2.p65 30 Black 23/10/07, 2:22 pm DRC-BT15_U2 [ES] 3-280-224-11(1) Printed in Malaysia
(1) 03ES06BCO_BT15_U2.p65 Black 30 DRC-BT15_U2 [US] 3-280-224-11(1) 23/10/07, 2:22 pm
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-11-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-11-26
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
M******@us.ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
DRCBT15
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** T******
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan Inc
|
||||
1 | Name |
T****** I******
|
||||
1 | Physical Address |
907 Kawanishi, Yamakita-machi
|
||||
1 |
Ashigarakami-gun, Kanagawa-ken, 258-0124
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-46********
|
||||
1 | Fax Number |
81-46********
|
||||
1 |
T******@jp.ul.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
UL Japan Inc
|
||||
1 | Name |
K******** K******
|
||||
1 | Physical Address |
4383-326 Asama-cho
|
||||
1 |
Ise-shi, Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
K******@jp.ul.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/10/2008 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Audio Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc
|
||||
1 | Name |
M******** F******
|
||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
m******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0005900 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC