FCC ID: 2A3EE-M56 Wireless Charging Pad

JA 160-8430 62730 Produced by SQUARE ENIX CO., LTD. Merchandising Business Division SHINJUKU EASTSIDE SQUARE 6-27-30 Shinjuku, Shinjuku-ku, Tokyo 160-8430, Japan Instruction manual / Manuel d'utilisation / Anleitung https://sqex.to/MDINFO 140-00033-2-38 SRC SQUARE ENIX INC., Merchandising Department :

999 N. Pacific Coast Hwy. 1st Floor, El Segundo, CA 90245 Customer support sqex.to/mdsupport U S A U K 9YYA18-JA1 (Y2108) SQUARE ENIX LIMITED Merchandising :

240 Blackfriars Road, London SE1 8NW, U.K. Customer support http://sqex.to/eustoresupport USB-AC2 USBUSBType-C) USBUSBType-A)USB-AC USB-AC LED1 LED ON LED 1 3 LED

Qi (Version 1.2.4) 5V/9VQC 3.0 5W / 7.5W / 10W USBType-C USB Type-C USB-AC USBType-A U S B USB Type-A / USB Type-C 120cm 10010012 USB 62g

Qi Wireless Power Consortium

USB Type-CTM USB Implementers Forum

TM

USB

Qi WPC Qi WPC(QiQI-ID12098 USB

IH IHQi USB USB IC

10WQC 3.0

LED

Qi

5 IC LED LEDLED https://sqex.to/MDINFO

USB-AC2 USB USB-AC

USB

4

OFF

USB

040

USB LED

Qi

USB USB USB USB USB 5VUSB-AC USB 5V Qi Qi USB 5V/2A USB-AC 5 5 0

4 EN Instruction manual This product complies with the EMC and RoHS requirements of the European Community. How to Use This symbol on the product, packaging and accompanying document indicates that this product should not be disposed with normal household waste. This product shall be taken to the applicable collection point for recycling. If you ever need to throw away, please contact the shop where you purchased the product, or your local authority. 1. Connect Cable Prepare a USB-AC adaptor (5V/2A or more recommended) separately.

(1) Connect the USB connector (Type-C) of the included USB cable with the input terminal

(2) Connect the USB connector (Type-A) of the included USB cable with a commercially

(3) Connect the USB-AC adapter to a household power outlet.

(4) When the power is turned on, the LED on the main unit will light up, and turn off after Error of the main unit. available USB-AC adapter. approximately 1 second. 4. How to View the LED Display Status of Main Unit Power ON (device to be charged is not placed) Supplying power Light remains on When the device to be charged is removed LED Display Status Light turns off after turning on for about 1 second Light turns off after being on for about 3 minutes Light continues to blink

* The LED display that indicates when the device is fully charged differs by the type and function of each device to be charged. Input terminal Main Product Specications Standard Input Output Qi (Version 1.2.4) 5V/9V*Supports QC 3.0 5W / 7.5W / 10W USB connector (Type-C) Input Terminal USB Type-C USB-AC adapter (sold separately) USB connector (Type-A) USB Cable Connector type: USB Type-A / USB Type-C Cable length: Approximately 120 cm (including connector) Main Unit Size Approximately W 100 x D 100 x H 12 (mm) USB cable Mass Approximately 62 g

* Product specifications are subject to change without notice for improvement. If you wear any medical devices, consult with your doctor before use. This product may affect the operation of medical electrical equipment. Do not use in the car. This may affect the operation of equipment, such as anti-theft systems for cars. Qi is a registered trademark of Wireless Power Consortium. USB Type-CTM is a registered trademark of USB Implementers Forum. All other product names or otherwise mentioned within the text are registered trademarks of each respective manufacturer. The TM mark is not specified within the text. Please Read First for Safe Use Accessories The diagram is for explanatory purposes; the actual shape of the product may differ. Instruction manual Serial No. 9YYA18-EN1 (Y2108) The precautions outlined here are meant to reduce chance of harm or damage to you and others. Please be sure to follow these guidelines. Symbols Indicates prohibited conduct (what you must not do).

Indicates caution. DANGER Conduct that may cause substantial harm or damage. WARNING Conduct that may cause death or serious injury. Do not charge devices while they are in contact with your body, such as when it is placed in your pocket. This may generate heat and cause burns. Do not place this product near re or heat sources. This may cause substantial harm or damage. Do not supply power by any method other than specied or use equipment with a voltage/current that exceeds the input specications. This may cause harm or damage. Do not place this product in cooking devices (including microwave ovens and high-pressure containers). This may cause harm or damage. Do not supply power near IH cookware. IH cookware share the same frequency band as the Qi standard. Using this product to supply power when near IH cookware may cause the product to malfunction, overheat, or breakdown. Keep out of the reach of infants at all times. This may cause harm or damage. Do not allow this product to come into contact with liquids. This may cause harm or damage. Do not touch the USB cable with wet hands. This may cause harm or damage. Fully and securely insert the USB cable terminal. If the USB is not fully inserted, this may cause harm or damage to the product. Do not place anything other than standard-compliant equipment on this product. This may cause harm or damage. Do not place metal objects, or objects that contain metal, between the surface supplying power and the device being charged. This may cause harm or damage. Do not insert metal into the terminal. This may cause harm or damage. Do not disassemble or modify the product. This may cause harm or damage. Do not use in humid places, such as bathrooms and near humidiers. This may cause harm or damage. Immediately discontinue use if the product, cable, or charging device exhibits abnormalities, such as smoke, damage, heat, deformation, unusual odor, or unusual sounds. This may cause harm or damage. If you wear any medical devices, consult with your doctor before use. This product may affect the operation of medical electrical equipment. Do not use in the car. This may affect the operation of equipment, such as anti-theft systems for cars. When there is thunder, do not touch this product or compatible devices. This may cause harm or damage. If charging is not completed, even after the specied charge time has exceeded, stop charging. This may cause harm or damage. Do not use anything other than the included cable. This may cause harm or damage. Do not cover or wrap this product with a cloth or futon when power is being supplied. This may cause harm or damage. Do not subject this product to strong impacts, such as dropping or throwing this product. This may cause harm or damage. Do not place heavy objects on the USB cable or this product. This may cause harm or damage. Do not supply power from a car's cigarette lighter socket. This may cause harm or damage. CAUTION Conduct that may cause injury or physical damage. When used by children, guardians should read the instruction manual carefully and instruct children on proper usage. Be sure to maintain proper usage of this product, especially while charging. Place on a stable and level surface. Placing the product on an inclined or unstable surface may cause it to fall and cause injury or damage. Do not place near magnetically sensitive objects. Items such as credit cards, smart chip cards, and debit cards, may break or records may be wiped due to magnetic properties and heat. If cards are stored in the case, remove them before product use. Remove the USB cable from this product when the product is not being used for an extended time. This may cause harm or damage. Do not use in places such as the following. This may cause harm or damage. Near re Near heating devices Under an electric blanket Places exposed to direct sunlight Places where the temperature is 0 or lower and 40 or higher Places where a lot of dust is generated Do not connect this product using a USB hub. This may cause harm or damage. Main unit USB cable (dedicated) Instruction manual (this document) DANGER Product Features This product is a certied device of the "Qi" wireless charging standard. WARNING WPC Qi Certied WPC (Qi) Certication Number: QI-ID12098 The device to be charged does not need to be connected with a cable as devices, such as smartphones that conform to Qi standards, will charge just by placing them on the product. This product comes with a protective function that stops power supply to the device when overcurrents are detected. Power supply will resume when the charging device is removed for 5 seconds and placed back on the product. Maximum 10W quick charge is possible (QC 3.0 compatible). This product comes with a foreign matter detection function that stops power supply when it detects foreign matter, such as metal. The LED indicates the power supply status. Precautions for Use Backup the memory on the device to be charged before using such device with this product. Prepare a USB-AC adapter (5V/2A or more recommended) separately. While power is being supplied, this product and the device being charged may become warm, but this is not abnormal. If the temperature rises while power is being supplied, it may stop charging due to the protection function on the charger. Wait until the temperature of the device to be charged has cooled down sufficiently before supplying power again. Charging may not work or become unstable if a case with a thickness of more than 4 mm or a metal case is attached. Noise may occur if used near radios or similar. For devices to be charged with a vibration function, the device may fall from the product due to it vibrating, so turn off the vibration function before use. It is not possible to supply power to multiple devices to be charged at the same time.

* This product is meant for general household use. Do not use it for business purposes or for situations similar to business use.

* This product is not intended to be used for facilities and equipment involved with human lives, such as medical equipment, nuclear equipment, aerospace equipment, transport equipment, as well as facilities and equipment that require a high degree of reliability, so do not use this product for such purposes. The company is not responsible for any personal injury or social damage caused by using this product.

* The company is not liable for any damages caused by using this product. The duplication and modication of this instruction manual is prohibited. Please note that our company is not responsible for any expenditure, monetary losses, or other losses caused by the use of this product. Do not place metal objects, or objects that contain metal, between the surface supplying power and the device being charged. This may cause harm or damage. CAUTION FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. Do not place near magnetically sensitive objects. Items such as credit cards, smart chip cards, and debit cards, may break or records may be wiped due to magnetic properties and heat. If cards are stored in the case, remove them before product use. 2. Begin Charging

(1) Place device to be charged, such as a smartphone, in the power supply area.

(2) When the device begins to charge, the LED lamp on the main unit will light up. If the LED lamp does not light up, reposition the device and place it in an area that lights up the LED lamp.

* This product has a power transmission coil, and each device to be charged has a power reception coil built-in; power is supplied from electromagnetic induction generated when the power reception coil comes near the power transmission coil that has received the electrical current.

* The position in which the power reception coil had been installed in the device to be charged may differ depending on the type of device. Adjust the position in which the device to be charged is placed within the power supply area by turning it upside down and such.

* This does not guarantee that power will be supplied to all devices. Device to be charged Power supply surface Power supply area When Abnormalities are Detected The LED lamp will blink when abnormalities, such as those outlined below, are detected:

The device to be charged is placed outside the power supply area. The device to be charged does not support Qi. Foreign matters such as metal pieces are caught in between the main unit and the device to be charged.

* If the device to be charged has a case attached, depending on the material and thickness of the case, the device may not charge normally. Remove the case beforehand to charge normally. 3. Finish Charging Check the status of the charge through the display on the device side. When disconnecting the USB cable, be sure to hold the connector and pull it straight out. How to handle the USB connector Good example Bad example: Easy to break If there Appears to be a Malfunction If the device to be charged does not charge or is taking too long to charge, please refer to the following table. If the matter cannot be resolved, please contact SQUARE ENIX Customer Support. https://sqex.to/MDINFO Issue Solution The power source for the USB may not be turned on. Check the power connection of the power supply source, such as securely insert the USB-AC adapter (sold separately) into the outlet. The USB connector may be loose or unplugged. Check to see that the USB cable is properly connected. A USB cable other than the one included may be in use. Use the included USB cable. Power may not be supplied when using a USB-AC adapter that exceeds 5V rated output voltage. Use equipment with a rated output voltage of 5V. The device to be charged may not be compatible with the "Qi" standard. Check to see if the device is compatible with the "Qi" standard. The rated output for the power source of the USB may be too low. Use a USB-AC adapter (sold separately) of 5V/2A or more. It could be out of the usage temperature range. Supply power within the operating temperature range. The device to be charged could be placed outside the power supply area. Adjust the position of the device to be charged. Foreign matter such as metal pieces may be caught between the power supply surface and the device to be charged. Remove the foreign matter and place the device to be charged back on the unit after approximately 5 seconds; the power supply will resume. Charging may not work or become unstable if a case with a thickness of more than 4 mm or a metal case is attached. Remove the case to charge. If the temperature rises while power is being supplied, it may stop charging due to the protection function on the charger. Before resuming power supply, ensure that the device to be charged has sufciently cooled down. This product comes with a protective function that stops power supply to the device when overcurrents are detected. Remove the device to be charged and place it back on after 5 seconds; the power supply will resume. The device to be charged may be in use while power is being supplied. Be mindful that if the device to be charged is in use while power is being supplied, it will extend the time it will take to charge.

* Depending on the type of device, or if the battery level on the device to be charged is depleted, it may take longer to start up or power may not be supplied.

C5266091_X10_Ed.1 SQUARE ENIX CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A3EE-M56 Date: 11/18/2021 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: MATSUSHITA Masato Title: Manager Date: 11/18/2021 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: SQUARE ENIX CO., LTD. Address: SHINJUKU EAST SIDE SQUARE 6-27-30 Shinjuku, Shinjuku-kum Tokyo 160-8430, Japan Product Name: Wireless Charging Pad Model Number: WCPDFF7-01, WCPDFF7, WCPDFF7-02, WCPDDQT-01 FCC Identifier: 2A3EE-M56 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: MATSUSHITA Masato Date: 11/18/2021 Title: Manager Signature of applicant:

1/1

SQUARE ENIX CO., LTD. Model difference statement Product Name: Wireless Charging Pad Model No.: WCPDFF7-01, WCPDFF7, WCPDFF7-02, WCPDDQT-01 We (SQUARE ENIX CO., LTD., SHINJUKU EAST SIDE SQUARE 6-27-30 Shinjuku, Shinjuku-

kum Tokyo 160-8430, Japan) hereby state that all the models are the same circuit and module, except the model name silk screen and color. Signature:

Name: MATSUSHITA Masato Title: Manager Tel: +81-3-5292-8100 Email: mamasato@square-enix.com Date: 11.18.2021