GC-00002 Stratus XL Android User Manual

 

SteelseriesAndroidgamepadSpecification Mode:GC00002 TradeName:STEELSERIES FeaturesandSpecification

(cid:122) CompatiblewithAndroid,PC,OSXplatforms

(cid:122) Withfouractionbuttons

(cid:122) DisplaystringSteelseriesAndroidXL

(cid:122) DPad(8direction)

(cid:122) TwodigitalL1/R1buttons

(cid:122) Twoanalogtriggerbuttons

(cid:122) Homebutton

(cid:122)

(cid:122) BATbutton(batterycapacityindicator)

(cid:122) Two3Dsticks

(cid:122)

(cid:122) Powerswitch

(cid:122) MiniUSBupgradeport(insidebatterycompartment)

(cid:122) 2*AAbattery

(cid:122) Power class level: Class 2 (-6dBm < PAV < 4dBm) FourLEDindicator(orange) Forceconnectionbutton MicroUSBupgrademethod

(cid:122) PlugtheUSBdatacable,thegamepadfourLEDswillbeon&offevery0.25sinturn,indicatingupgrading, thefourLEDswillbeoffafterupgradecompleted.

(cid:122) WhenconnectbyBluetooth,theBluetoothdevicenameisSteelSeriesAndroidXL;WhenconnectbyUSB cable,thedisplaystringisSteelSeriesAndroidXLBootloader MouseFunction

(cid:122) Defaultmode:Gamepadmode

(cid:122) PressandholdL3&R3for3secondssimultaneously,theLEDswillflashinturn1>>2>>3>>4,indicatingthe gamepadentersmousemode

(cid:122) Inmousemode,L1equalsmouseleftbutton,R1equalsmouserightbutton.Right3Dequalsmousemove

(cid:122) PressandholdL3&R3for3ssimultaneouslyagain,thegamepadgoesbacktogamepadmode,andtheLEDs willbeonfor0.04sandofffor2s. Note:Undermousemode,whenpoweroffandpoweronthegamepadagain,itwillbeingamepadmode. SleepMode

(cid:122) Thegamepadwillentersleepmodeinoneofthefollowingconditions:

1) withoutanyaxisorbuttonmovementin15minutes 2) notconnectedin15minutes 3) notpairedwiththehostdevicein15minutes

(cid:122) Wakeupmethod 1) EitherDPAD(up,down,left,right),A,B,X,Y,L1,R1,L3,R3,BACK,START,HOME,orBATbuttoncan wakeupthegamepad,theLEDwilldisplaythebatterycapacityfor3sfirst,andreturntostatusbefore sleeping. Lowbatteryalarmfunction&batterycapacityindicator

(cid:122) PressBATbutton,theLEDswillbeinoneofthefollowingstatus:

indicates0%10%battery,the1stLEDwillbeon&offevery0.5sinturn indicates10%30%battery,the1st&2ndLEDswillbesolid indicates30%95%battery,the1st,2nd&3rdLEDswillbesolid indicates95%100%battery,the1st,2nd,3rd&4thLEDswillbesolid

(cid:122) When not in low battery alarm status, the battery indicating time will be 3s, and return to normal connectionstatus. Note: When the battery is below 0%10%, the gamepad 1st LED will flash on & off every 0.25s for 10 times;

Whenthebatteryislowinanystatus,thegamepadwillalarmevery20s;Whenbatterybelow1.8V,thegamepad willbepoweredoffautomatically. ForceConnectionMethod

(cid:122)

(cid:122) If the gamepad is not connected with the device before, itll enter force connection mode automatically whenpoweron,andthefourLEDswillbeon&offevery0.5sinturn Ifthegamepadhasbeenconnectedbefore,itllonlysearchforandconnectwiththepreviousconnected deviceswhenpoweronagain,andthefourLEDswillbeon&offevery0.5sinturn

(cid:122) When press and hold Force Connection button less than 5s, firstly, the 1st & 2nd LEDs will be on for 1s;

Secondly,the3rd&4thLEDswillbeonforanother1s;Thirdly,thegamepadwillsearchfornewdevices,and thefourLEDswillbeon&offevery0.5sinturn.Itllconnectwiththepreviousconnecteddeviceafter30s, andthefourLEDswillbeon&offevery0.5sinturn.

(cid:122) WhenpressandholdForceConnectionbuttonabove5s;Firstly,the1st&3rdLEDswillbeonfor1s;Secondly, the2nd&4thLEDswillbeonforanother1s;Thirdly,thegamepadwillremovethepairingrecords,andsearch fornewdevices,andfinallythefourLEDswillbeon&offevery0.5sinturn. NOTE:WhenpressForceConnectionbutton,theLEDwillnoton)

(cid:122) Click SteelSeries Android XL in DevicesBluetooth settingsBluetooth devices to connect with the device

(cid:122) ThefourLEDswillbeonfor0.04s,andofffor2stoindicateconnectionsucceed Note:Thegamepadsequencewillbeassignedbythegamesoftware Reconnection

(cid:122) Ifthegamepadisconnectedwiththedevicebefore,theyllbereconnectedautomaticallyseveralseconds whenpoweronagain (itlldisplaythebatterycapacityfor3sfirst) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1 5 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid ential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used i n accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television reception, which can be determined by turning the equipment off and on, the user is enc ouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This de vice may not cause harmful interference, and (2) This device must accept any interference received, including inte rference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate this equipment. IC Compliance This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interf erence, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. RF Radiation Exposure Statement The device has been evaluated to meet FCC and RSS-102 general RF exposure requirement. The device can be used in portable exposure condition without restriction.