Sunitec Enterprise Co., Ltd ISED/FCC Modular Approval Statement Receiver Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Limited Modular Approval Statement Date: 2017/07/13 FCC Certification Number: 2AMX3BM64C1 Model Name/Number: BM64C1 Subject:
No Yes No *
TO WHOM IT MAY CONCERN Pursuant to Paragraphs RSS-Gen Issue 3 December 2010 Item 3.2 and CFR 15.212, we herewith declare for our module. Modular approval requirement
(a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly.
*Please provide a detailed explanation if the answer is No.: BCM64C1 without shielded for both sides;
(b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation.
*Please provide a detailed explanation if the answer is No.:
(c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module.
*Please provide a detailed explanation if the answer is No.:
(d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module.
*Please provide a detailed explanation if the answer is No.:
(e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. Yes Yes Yes No 1 Sunitec Enterprise Co., Ltd ISED/FCC Modular Approval Statement Yes
*Please provide a detailed explanation if the answer is No.: BCM64C1 tested at standalone host;
please see test setup photos;
(f) The module shall comply with the Category I equipment labeling requirements and CFR 15.212(a) (1) (vi).
*Please provide a detailed explanation if the answer is No.:
(g) The module shall comply with applicable RSS-102 exposure requirements and any applicable FCC RF exposure requirement which are based on the intended use/configurations.
*Please provide a detailed explanation if the answer is No.:
Only applicable for IC certification:
(h) Is the modular device for an Industry Canada licensed exempt service?
*Please provide a detailed explanation if the answer is No.:
Only applicable for FCC certification:
(i) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. Yes Yes 2