FCC ID: 2A3NS-SSHL175 Intelligent Heat Lamp

User Manual for Sveaverken Intelligent Heat Lamp SSHL175s Sveaverken Intelligent Technology (Shenzhen) Co., Ltd. User Manual for Sveaverken Intelligent Heat Lamp Table of Contents I. Safety Precautions ........................................................................................................................... 1 II. Product Introductions ...................................................................................................................... 2 III. Specifications ................................................................................................................................. 2 IV. Device Installation .......................................................................................................................... 3 1. Device Composition .............................................................................................................. 3 2. System Architecture .............................................................................................................. 4 3. Assembly Steps ..................................................................................................................... 4 V. APP Instructions .............................................................................................................................. 5 1. Homepage ............................................................................................................................. 6 2. Language Setting .................................................................................................................. 6 3. Device Adding ....................................................................................................................... 8 4. Device Deletion ..................................................................................................................... 9 5. Device Management ........................................................................................................... 10 6. Information Management .................................................................................................... 12 I. Safety Precautions User Manual for Sveaverken Intelligent Heat Lamp Note WARNING 1 Please read this manual before installing, adjusting, inspecting, and maintaining the Intelligent Heat Lamp. Improper installation and operation may cause serious injury, for which the manufacturer will assume no responsibility!

Please carefully read this manual to install and use the Sveaverken Intelligent Heat Lamp. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. The AC power supply should comply with the product specifications!

Do not touch the hot lamp shade with your hands!

The circuit, ammeter, and air switch should comply with the load requirements of the product!

Wear PPEs during the installation, adjustment, inspection, and maintenance of the intelligent heat lamp!

The bulb has a service life of 8000 H. At the end the life, please contact Sveaverken to purchase a replacement to avoid affecting the lamp effect in use!

It is quite essential to inspect and maintain the device regularly for its proper operation!

The device which is damaged must be replaced by the manufacturer, its service agent or similar qualified team to avoid danger!

User Manual for Sveaverken Intelligent Heat Lamp DANGER The bulb which is fragile must not be squeezed or hit!

The lamp shade which is easy to deform must not be stacked or squeezed to avoid affecting the effect in use. II. Product Introductions Temperature Control lamps are often required for poultry or livestock breeding and greenhouses. However, the traditional lamps with only two levels of brightness control may affect the growth of poultry and livestock at high or low temperature.Sveaverken Intelligent Heat Lamp is capable of adjusting the brightness based on the preset target temperature to keep the breeding sheds and greenhouses at constant temperature to avoid repeated manual adjustments, thus reducing contact between humans and animals and minimizing power consumption. Heat lamps are particularly important for pig breeding. Due to the high demand for temperature of piglets, the ambient temperature has an important effect on the growth and survival of piglets.The suitable temperature for piglets is 32~34 at birth, 30~32 during the first three days, 28~32 during the next four days, 26~28 within 2 weeks postpartum, 24~26 within 3 weeks postpartum, 24 C after weaning, and gradually drops to the same level as the ambient environment.Traditionally, the manual adjustment of the lamp height and the repeated adjustment of brightness at the different growth stages of piglets result in huge labor costs. The Sveaverken Intelligent Heat Lamp is capable of accurately controlling its luminous power through intelligent algorithm based on the ambient temperature in real time, saving electric energy, reducing labor costs, and improving the survival of piglets and the welfare of human and livestock. Tests show that a 175 W traditional heat lamp consumes about 1,500 watts a year, while the Sveaverken Intelligent Heat Lamp consumes only 1,000 watts a year, saving 1/3 of the cost. Executive standard:

Model SSHL175s III. Specifications Executive standard GBT/23140-2009 Specifications of Sveaverken Intelligent Heat Lamp 2 Model SSHL175s/SSHL175 User Manual for Sveaverken Intelligent Heat Lamp 1.5 m/1.75 m/2 m/2.5 m 0.75 cm2 National/American standard triangle plug/customized AC220V~AC240V 175 W 2 m stainless steel Infrared bulb 300*330 mm IOT

>5000 h CE/FCC 10 pcs/box Lamp shades and bulbs packaged separately Power supply voltage Rated power Hanging chain Type of light source Wire length Wire specification Plug type Dimensions Control mode Bulb life Certification Package Remark IV. Device Installation 1 2 3 4 5 6 7 1. Device composition 1.1 Anti-rust iron chain, 2 m long, lamp height adjustable as required. 3 User Manual for Sveaverken Intelligent Heat Lamp 1.2 Heat-resistant lamp holder, with good flame retardance and heat dissipation effect. 1.3 Aluminum alloy lamp shade, with heat-resistant coating to prevent oxidation. 1.4 Manual switch, convenient and efficient. 1.5 Intelligent control box, more intelligent and energy-saving. 1.6 Temperature probe, with high accuracy and large range. 1.7 Protective net, scald prevention, easy to disassemble, maintain and clean. 2. System architecture Wireless network Ethernet Server 3. Assembly steps Intelligent Heat Lamp Intelligent Heat Lamp Intelligent Heat Lamp 1. Align the fixing screws of the lamp holder with the fixing holes at the top of the lamp shade, and assemble the two components;

2. After fixing the lamp holder and the lamp shade, tighten the screws with a cross screwdriver 4. Remove the lamp protective net, and install it into the mounting groove, with one end through the net limit hole on one side of the lamp shade;

5. The the installation of protective net is completed;

6. Connect one end of the 4 3. After aligning the lamp thread with the lamp base, turn the bulb clockwise, and tighten and fix it to the lamp base;

User Manual for Sveaverken Intelligent Heat Lamp hanging iron chain to the lamp holder, and fix the other end to the hanging position;

7. The assembly of the heat lamp is completed;

8. Note that the temperature probe shall be installed 4 cm below the edge of the lamp shade. V. APP Instructions The APP which is mainly designed for front-line team enables users to manage all lamps with one click via Pad. In addition to remote device management, it also supports the backup of the Pad local data to the cloud via the Internet.This APP greatly improves the management efficiency of heat lamps. 5 1. Homepage 1.1 Ready-to-use in local mode without login;

1.2 Icon-based display that delivers the real-time status of devices;

1.3 Top search box where you can enter keywords to quickly select devices;

1.4. Clicking the ON/OFF icon enables you to quickly turn on/off the bulbs;

1.5 Clicking the + on the right of the search bar enables you to scan and add nearby devices. Intelligent Heat Lamp Control Pad Input Device Location to Search All Manual Auto Exception Maintenance Block up Pigsty 01 Shed 001 Auto mode Manual mode Auto mode Pigsty 01 Shed 001 Pigsty 01 Shed 001 Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Pigsty 01 Shed 001 Pigsty 01 Shed 001 Exception Mode Stop Mode Maintenance Mode None None None None None None Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Auto mode 2. Language Setting 2.1 Click the navigation bar at the top of the homepage, 2.2 Go to the Setting interface 2.3 Set the language 6 Intelligent Heat Lamp Control Pad Input Device Location to Search Manual Auto Exception Maintenance Block up Device Record Setting Auto mode Manual mode Auto mode Pigsty 01 Shed 001 Pigsty 01 Shed 001 Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Pigsty 01 Shed 001 Pigsty 01 Shed 001 Exception Mode Stop Mode Maintenance Mode None None None None None None Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Auto mode Intelligent Heat Lamp Control Pad Setting Pad Name Intelligent Heat Lamp Control Pad of Miaohong Farm Building A1 Language Setting System Language 7 Intelligent Heat Lamp Control Pad Language Setting System Language Simplified Chinese 3. Device Adding 3.1 Click + to display a list of nearby connectable devices 3.2 Click the device icon to complete the device information. Intelligent Heat Lamp Control Pad Add Device List of Connectable Devices Intelligent Heat Lamp A01 Intelligent Heat Lamp A01 Intelligent Heat Lamp A01 Intelligent Heat Lamp A01 Intelligent Heat Lamp A01 8 Intelligent Heat Lamp Control Pad Complete Device Information Device Name Intelligent Heat Lamp SN12345676 Installation Location For example Pigsty 01 Shed 001 Remarks Input Remarks Add Cancel Intelligent Heat Lamp Control Pad Complete Device Information The device is added successfully!

After clicking Save or Add, a pop-up window will appear and go to the device management interface 9 4. Device Deletion 4.1 Press and hold the icon on the homepage to go to the Delete interface 4.2 Select the device to be deleted in the dialog box and click Delete Intelligent Heat Lamp Control Pad Delete Device 1 device selected Delete Pigsty 01 Shed 001 Pigsty 01 Shed 001 Pigsty 01 Shed 001 Auto mode Manual mode Auto mode Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Pigsty 01 Shed 001 Pigsty 01 Shed 001 Stop Mode Maintenance Mode Exception Mode None None None None None None Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Auto mode Intelligent Heat Lamp Control Pad Delete Device 1 device selected Delete Pigsty 01 Shed 001 Pigsty 01 Shed 001 Pigsty 01 Shed 001 Auto mode Manual mode Auto mode Device Switch Device Switch Pigsty 01 Shed 001 Exception Mode Are you sure you want to delete the device?

OK Cancel Pigsty 01 Shed 001 Maintenance Mode None None None None None None Device Switch Device Switch Device Switch Pigsty 01 Shed 001 Auto mode 5. Device Management 5.1 Click the icon on the homepage to go to the device detail interface 5.2 Edit the device work mode, setting time, device information, and device switch 10 Intelligent Heat Lamp Control Pad Device Management Pigsty 01 Shed 001 Brthday of pigs Auto mode Monitor the ambient temperature and automatically adjust the light intensity based on the set birthday of pigs. Manual mode Keep the light intensity constant based on the set temperature or power. Work Mode Auto mode Setting Time Open Device Stop Device off-line in stop mode. Device Information Device Switch Device Maintenance Device off-line in maintenance mode. Intelligent Heat Lamp Control Pad Auto mode Monitor the ambient temperature and automatically adjust the light intensity based on the set birthday of pigs. Manual mode Keep the light intensity constant based on the set temperature or power. Device Management Pigsty 01 Shed 001 Work Mode Auto mode Setting Time Open Device Information Device Switch Temperature Power Device Stop Device off-line in stop mode. Device Maintenance Device off-line in maintenance mode. 11 Intelligent Heat Lamp Control Pad Device Management Set Time Pigsty 01 Shed 001 Day Repeat Week Repeat Monday Add Work Mode Auto mode Setting Time Open Device Information Device Switch Start time 2:02 End time 2:02 Confirm Intelligent Heat Lamp Control Pad Device Management Pigsty 01 Shed 001 Work Mode Auto mode Setting Time Open Device Information Device Switch Device Name Intelligent Heat Lamp SN12345676 Installation Location Pigsty 01 Shed 001 Installation location not null Remarks Input Remarks MAC Address Setting Time Device SN Cancel Save 6. Information Management 12 Intelligent Heat Lamp Control Pad Pad Name Intelligent Heat Lamp Control Pad of Miaohong Farm Building A1 OK Cancel Intelligent Heat Lamp Control Pad Complete Device Information Search The device is added successfully!

After clicking Save, a pop-up window will appear and go to the homepage 13

FCC ID Label Location 10mm*20mm FCC ID: 2A3NS-SSHL175 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Sveaverken Svea Agri AB Hogmossevagen 11, SE-641 39 Katrineholm, Sweden Agent Authorization Company: Sveaverken Svea Agri AB Address: Hogmossevagen 11, SE-641 39 Katrineholm, Sweden Product Name: Intelligent Heat Lamp Model Number(s): SSHL175s, SSHL175 Product Description: Intelligent Heat Lamp We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Nov.22, 2021 Name:

Jett Liao Title:

General Manager Company: Sveaverken Svea Agri AB

Sveaverken Svea Agri AB Hogmossevagen 11, SE-641 39 Katrineholm, Sweden Nov.22, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types To Whom It May Concern:

FCC ID: 2A3NS-SSHL175 Models: SSHL175s, SSHL175 We, The Sveaverken Svea Agri AB hereby declare that the model :

SSHL175s is identical with the model : SSHL175, except the model name. Except for the different above, no other modification is performed. Sincerely, Sveaverken Svea Agri AB Signature:

[Jett Liao, General Manager]

Sveaverken Svea Agri AB Hogmossevagen 11, SE-641 39 Katrineholm, Sweden Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov.22, 2021 Subject; Request for Confidentiality FCC ID: 2A3NS-SSHL175 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

[x] Schematic Diagram Xx] Block Diagram X] Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Je tt LG Name: Jett Liao Title: General Manager