submitted | available | document details (if available) | source link |
---|---|---|---|
March 07 2014 | March 07 2014 |
various | user manual | Users Manual | 800.10 KiB | March 07 2014 |
Mobile Phone Brand Name: Zoom, iSWAG Model Name: Paris FCC ID: O55454110 Power key: Press and hold this key to turn on/off the mobile phone; in standby state, press this key to turn on/off the screen Menu key: Press this key to open the action list, so that you can execute the action in current interface or menu. Home key: Press this key to return to the home page from any application or interface. Back key: Press this key to return to previous interface, or close the dialog box, menu, notification panel or the screen keypad. Side key: Press this key to adjust volume Installation method and precautions of SIM card By setting PIN (personal identification number) code of the SIM card, you can protect your SIM card from illegal operation. Installing SIM card This is a dual SIM mobile phone with two SIM slots. Please turn off the mobile phone first, take out the battery, and insert the SIM card into the slot as shown in the picture below; then, place the battery into the battery jar and install the battery cover. Precautions of SIM card By setting PIN (personal identification number) code of the SIM card, you can protect your SIM card from illegal operation. If the PIN code is enabled, you need to enter the valid PIN code when you turn on the mobile phone. If you input wrong code for three times continuously, your SIM card will be locked and you need to input PUK code. Note: Your network service provider will set a standard PIN code (4-8 digits) for your SIM card. Please change it with your private password as soon as you get the phone. Connecting to network When the SIM card is decrypted, the mobile phone will search registered network or available local network automatically. Once connected, the logo of the network operator appears in the top of the screen, the mobile phone is in standby state, and you can make or answer calls. Please contact your network operator if the SIM card has a failure. Precautions of SIM card:
Put the SIM card out of childrens reach. Please use, insert and remove the SIM card carefully because the SIM card and its contacts are prone to be scratched or damaged by bending. Do not expose the SIM card to electrostatic, dusty or moist environment. Operation and installation methods of SD card SD card is a removable mobile memory card inside the mobile phone and used for extending the storage space of the mobile phone. Battery and charging methods 1. Connect the charger to provided USB cable. 2. Connect the charger plug to the power outlet. 3. Connect the USB cable to the mobile phone; this icon indicates the charging status. 4. The battery is fully charged when the status icon changes to
; please disconnect the charger from the power outlet. 5. Disconnect the charger from the mobile phone. Note: If the battery isnt used for a long time or the battery is used up, the mobile phone may be not turned on normally while charging. It is normal. Please charge for a while before turning on the mobile phone. The battery can be charged repeatedly; however, it is consumable product, please change a new battery if the standby duration reduces significantly. The data service consumes more power and will reduce the standby duration. The charging time changes according to temperature and battery usage. The mobile phone will show prompt if the battery is too low. The mobile phone will power off automatically if battery level drops too low. Unlocking mode Mobile phone options list In standby state, you can press the Power key to lock and turn off the screen, and press it again to turn on the screen. Press and hold the Power key to open the mobile phone option list. Unlocking interface In locked screen, tap the icon in the bottom of the screen, slide to any direction unlock the screen, or drag the whole screen to right to access Camera and take pictures. Main menu Main menu page Slide to left/right on the screen to switch the main menu page, and tap the Menu key to select Manage applications or Settings Drag and drop an icon to desktop to create a shortcut. View notifications notifications interface of Status bar quick settings interface of Status bar Pull down the status bar, you can view the notifications interface directly,in this interface,you can view notifications of the mobile phone, or tap icon in top right conner of the screen to display quick setteings interface,in this interface ,you can turn on/off WLAN, Bluetooth, Data connection, GPS, Flight mode and customize profiles,etc. Manage applications In Manage applications interface, you can manage the running applications to improve the running speed of the mobile phone. You can view the information of downloaded applications, applications installed on SD card, running applications and all applications, restrict permissions or uninstall third party applications. Contacts You can search contacts through phone number, email account or name. Press the Menu key to select Contacts to display, Import/Export, Accounts, Send text message or Share contacts. Smart dialing In dial plate interface, the mobile phone will fuzzy match with local contact info and show in the result while you are typing. In settings, you can set up voice call, video call, Quick responses and others. During a call, you can access the dial plate or contacts through shortcuts. After typing the number with keypad, press MENU and select Speed dial. During the call, the backlight turns off when the phone is close to your ear for saving power and preventing misoperation Messaging & browser Messaging interface Support pinyin, and third party input method software. Tap Switch to switch among Chinese, English and stroke. If the language of spelling correction is set to English, tap the word in the input box while typing to get suggested results for choosing. Browser There default homepage interface will be show when you open the app first time,you can also change the default homepage to your favorite webpage site in the settings page. With this app,you can visit all of the internet webpages,download resource form the web server or watch video online. Music Music interface Support MP3, aac, ogg, midi and other formats; drag the progress bar while playing to move to any segment of the music, and tap Play button to pause or play. Tap and hold artist, album or music name to perform operations such as play, add to playing list, send to ring tone, delete, and search; select search to search music and play Camera Camera function Tap on the screen to focus and follow the focus automatically, making the capture of moving object more convenient. You can set best capture, continuous shooting, common mode, automatic scene detection and other modes. The camera integrates various creative styles; you can tap to preview different effects. Dual-camera Support front camera; tap to switch to front camera and take self photo shoot. Video recorder Support video recordingtap to switch to video recorder. Sound recorder You can record the sound, and send through MMS or Bluetooth directly, or set as ring tone. FM radio Insert the headset and listen to FM radio, which supports loud speaker. Gallery You can view the pictures and videos recorded by the camera in Gallery and or pictures and videos on SD card. In gallery, you can perform operations to multimedia files such as share, edit and set as wallpaper, or contact icon. E-mail Support Gmail and E-mail; you can create an account and read e-mails at any time and anywhere with this function, you can merge the e-mails of different e-mail boxes to the same interface. File Manager In File Manager interface, tap the Menu key to select New folder, Cut, and view the files stored on SD card directly. Tap and hold a file or folder and select Copy, Cut, Delete, Rename and other options. Software store This mobile phone is designed with built-in play store, which provides popular software and other sources; you can find wanted software through search or rank list. Experience the desktop shortcut of play store, get the recommended info quickly, and experience free download through WIFI or web client. Settings Security function You can set up screen security, encryption, SIM lock, etc. Backup and reset In this interface: you can back up the application data, WLAN password and other settings to Google serverand reset all data stored on the mobile phone. Note: Hotspot mode is supported. Drop-down menu bar Drop down USB connection in menu bar; as the mobile phone can be set as flash drive, the files on SD card can be copied to PC or from PC to mobile phone. Troubleshooting Please refer to the following list of problems and solutions if there is any abnormity when you use the mobile phone. Please contact the distributor or service provider if it still doesnt work. Problem Reason Solution Cant access Internet normally when using browser The network operator doesnt provide this service or you hasnt applied this service Please contact and consult your network operator for information of how to apply and use this service The setting is not correct Please refer to specific introductions of the browser SIM card is damaged Please contact your network operator SIM card error SIM The properly. card isnt installed Check the SIM card The metal surface of the SIM card is dirty The mobile phone is used in bad signal receiving area, for example, near tall building or in basement, the radio waves cant reach these area effectively The mobile phone is used when communication is busy and lines are congested. Clean it with clean cloth Please make or answer a call in places with strong signal Try to avoid using mobile phone when communication is busy Poor receiving Cant switch on Battery is too low Cant make a call Call barring is active Charge the battery Cancel call barring SIM card is invalid Please contact your network operator Cant connect to network Beyond service area Weak signal Move to service area of your network operator Move to a place with strong signal and try again The voltage is not within rated range of the charger Use an allowed voltage within the rated range of the charger Cant charge Nonstandard charger is used. Poor contact Toxic and Hazardous Substances Declaration Use a charger specially designed for the mobile phone Check whether the plug is connected properly Part Name Lead
(pb) Mercury
(Hg) Cadmium
(Cd) Toxic and hazardous substances or elements Polybrominated Hexavalent chromium
(Cr+6) biphenyl
(PBB) Polybrominated diphenyl ether
(PBDE) Master unit Battery Charger Accessories
:
indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
:
indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ/T11363-2006. The environmental use period of the product is 20 years. The symbol is shown in the left. Certain changeable parts may have a different environmental use period (e.g. battery unit module) pasted on the product. This environmental use period only applies to the products operated under the condition regulated in the Manual. FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back of the phone kept 10mm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the back of the phone, including the antenna. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 10mm separation distance between the users body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
<ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICIMIRP> (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with your phone (such as an earpiece or headset) to avoid potential exposure to RF energy. The design of your phone complies with the FCC guidelines (and those standards). Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. NORMAL POSITION:
Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refer to FCC website search for FCC ID: O55454110 to gain further information include SAR Values. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Do not use the device with the environment which below minimum -10 or over maximum 50, the device may not work. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Ad Hoc function is supported but not able to operate on non-US frequencies.
This product uses the FCC Data API but is not endorsed or certified by the FCC