FCC ID: H9PMC9050 Portable data terminal including two radios

www.symbol.com ORGInserAnatPC2MbpsShort.cdr Quick Reference Guide Wireless LAN Adapter LA-4137 Compact Flash Introduction The LA-4137 CFWL adapter allows CF Card slot equipped handheld computer systems to configure, connect to and establish a Spectrum24 network. Features Include:

50-pin Type I adapter card fully compliant with PCMCIA electrical and mechanical specifications Low-power operation for battery-powered devices with CF Card slots Pocket PC and Windows CE driver support Compact Flash form factor (CF+Type I extended) Automatic data rate and channel selection of 1, 2, 5.5 and 11 Mbps Wireless software upgrade Wired Equivalent Privacy (WEP) encryption and decryption An integrated antenna Card and Socket Services support Power management [Continuously Aware Mode (CAM) and Power Save Polling (PSP)]. Scope This Quick Reference Guide contains the CFWL adapter installation and configuration instructions for Windows CE/Pocket PC. Preparation Before beginning the installation, verify the hardware package contains:

LA-4137 CFWL adapter with an integrated antenna Spectrum24 High Rate 11 Mbps Wireless LAN Software CDROM. Note: Verify the model indicated on the card and packaging before use. Contact the Symbol Support Center if an item is missing or not functioning. Supported Devices The LA-4137 CFWL adapter has been qualified by Symbol Technologies to support the following devices:

Palm/Handheld (PH) computers running Windows CE/Pocket PC Palm OS (i.e. Hand ERA/TRG Pro).

*73-20990-01A*1 Revision A 72-52486-01 11742-1300 Holtsville, NY One Symbol Place Symbol Technologies, Inc. European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan);

D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D419,548 5,946,194; 5,959,285; 6,002,918; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700;

5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659;

5,821,520; 5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989;

5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519;

5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516;

5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835;

5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202;

5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469;

5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949;

5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139;

5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924;

5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398;

5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167;

5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550;

4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833;

4,387,297; 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;

U.S. Patent No. This product is covered by one or more of the following U.S. and foreign Patents:

Patents Novell and LAN Workplace are registered trademarks of Novell Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machine Corporation. companies and are hereby acknowledged. Other product names mentioned in this manual may be trademarks or registered trademark of their respective Symbol, the Symbol logo and Spectrum24 are registerd trademarks of Symbol Technologies, Inc. Symbol products. intellectual property rights. An implied license only exists for equipment, ciecuits, and subsystems contained in No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies, Inc., Symbol reserves the right to make changes to any product to improve reliability, function, or design. from Symbol Technologies, Inc. (Symbol). The material in this manual is subject to change without notice. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing Copyright 2001 by Symbol Technologies, Inc. All rights reserved. Copyright http://www.symbol.com/

+1-516-738-5200, in/outside North America 1-800-722-6234, inside North America. Obtain additional information by contacting Symbol at:

Additional Information Installing the LA-4137 CFWL Adapter The LA-4137 CFWL adapter installation requires:

a handheld computer with a Type I CF Card slot a desktop computer with a CDROM drive or Web access a Spectrum24 High Rate 11 Mbps Wireless LAN Software CDROM. To install the CFWL adapter:

1. Insert the CFWL adapter into the CF Card slot. Arrows on the front of the CFWL adapter indicate the insertion point to the slot. 2. Slide in the CFWL adapter until it firmly seats. Caution! Align the CFWL adapter properly when inserting. Insert the CFWL adapter firmly without forcing. Forcing the CFWL adapter into the slot can damage the device or the adapter. Note: If the CFWL adapter does not fit into the CF Card slot, a 68-pin, male reciever PCMCIA adapter is needed. 15.Click Advanced and scroll through the NCPA property pages to view the default adapter configuration. Use the Mobile Unit, Power, Transmission Power, Encryption and WLAN Adapter tabs to view or adjust the adapter configuration settings. Note: For additional information on using the NCPA utility to configure CFWL adapter properties, refer to Appendix A. 16.Click OK to save the changes to the adapter configuration and exit the NCPA utility. The Installing Spectrum24 WLAN Adapter Driver dialog box displays. Restart and reset the handheld computer and remove and reinsert the CFWL adapter for the configuration changes to take effect. If information with NCPA or additional adapter configuration is required, refer to Configuring the CFWL Adapter in Windows CE. Configuring the CFWL Adapter in Windows CE Note: The way to access the NCPA utility on Windows CE and Pocket PC devices differs depending on manufacturer. If the Spectrum24 Settings icon does not reside within the Windows CE Control Panel refer to the documentation shipped with the device. To configure the CFWL adapter in a Windows CE environment:

1. From the NCPA Easy Setup window, click Advanced. 2. Select Advanced and scroll through the NCPA property pages to view or adjust the default adapter configuration. Note: For additional information on using the NCPA utility to configure CFWL adapter properties, refer to Appendix A of the Spectrum24 Compact Flash Wireless LAN Adapter Users Guide. 3. Click OK to save the changes to the adapter configuration and exit the NCPA utility. 4. Restart and reset the handheld computer and remove and reinsert the CFWL adapter for the configuration changes to take effect. Troubleshooting The following problem scenarios could be encountered when using the LA-4137 CFWL adapter in a Windows CE environment:

The Handheld Computer Does Not Recognize the LA-4137 CFWL Adapter The handheld computer could display an Unidentified PC Card Adapter window when the LA-4137 CFWL adapter is inserted into the handheld computer. This probably means the Spectrum24 32-bit Windows CE driver was not loaded or was loaded incorrectly. If this is the case the driver files require reinstallation. Refer to the Spectrum24 32-bit Windows CE driver installation section for detailed installation instructions. To verify that the handheld computer recognizes the LA-4137 CFWL adapter:

1. Tap Start and select Settings and Control Panel. 2. Double tap the System icon. The Expansion Slot: in the System: section of the System Properties window should list Low_Power_Ethernet. This window displays the type of processor the handheld computer uses. 3. If the handheld computer does not recognize the Spectrum24 CFWL adapter and does not display an Unidentified PC Card Adapter window, remove and reinsert the CFWL adapter. An IP Address is Not Recognized by the Handheld Computer Remove and reinsert the CFWL adapter for changes to the IP address to take effect once the Network program has been run from the Windows CE Control Panel. Installing and Configuring the Driver in Windows CE Install the Spectrum24 Windows CE device driver from the Spectrum24 High Rate 11 Mbps Wireless LAN Software CDROM or download the driver from the Symbol Web site to a desktop computer. Symbol has bundled the NICTT and NCPA utilities with the Spectrum24 Windows CE driver. Use these utilities to monitor the status of the CFWL adapter as used within a handheld computer device. Before installing the Windows CE device driver:

obtain Spectrum24 High Rate 11 Mbps Wireless LAN Software CDROM verify that the Spectrum24 CFWL adapter is installed. Installing the Spectrum24 Driver in Windows CE 3.x To download the Spectrum24 Windows CE driver from the driver installation CD to a handheld computing device in a Windows CE 3.0 or 3.1 environment:

Note: Refer to the documentation shipped with the Microsoft ActiveSync program to ensure the desktop computer used in the driver installation meets the system requirements for the ActiveSync program. 1. Connect the sync cable to a serial or USB port between the desktop computer and the handheld computer. Once a connection partnership exists between the desktop computer and the Windows CE device, file transfers and data synchronization can take place. 2. From My Computer, right-click on the drive assigned to the CDROM. Click Open. Note: Double-clicking the CDROM drive launches the autorun. Close autorun. 3. Open the WinCE file folder and double-click on the Spectrum24forWindowsCE.exe file. The Unpacking File progress bar displays. 4. Click Yes to use the default application install directory when the Installing Application dialog box displays. 5. Click OK when the Application Downloading Complete dialog box displays. The NCPA Spectrum24 Easy Setup dialog box displays on the handheld device when the file download is done. 6. Enter the network ESSID in the Spectrum24 Easy Setup dialog box. 7. Click Advanced and scroll through the NCPA property pages to view the default adapter configuration. Use the Mobile Unit, Power, Transmission Power, Encryption and WLAN Adapter tabs to view or adjust the adapter configuration settings. Note: For information on using the NCPA utility to configure CFWL adapter properties, refer to Appendix A. 8. Click OK to save the changes to the adapter configuration and exit the NCPA utility. The Installing Spectrum24 WLAN Adapter Driver dialog box displays after adjustments are made. 9. Restart and reset the handheld computer and remove and reinsert the CFWL adapter for the configuration changes to take effect. If additional information of NCPA or adapter configuration is required, refer to Configuring the CFWL Adapter in Windows CE. Downloading the Spectrum24 Windows CE Driver from the Symbol Web Site Before copying the Spectrum24 device driver to a handheld computer, download the driver from the Symbol Web site. To download the Spectrum24 device driver from the Symbol Web site:

1. From the desktop computer, go to the Symbol Web site

(http://www.symbol.com/services/downloads/download_spec24.html). 2. Select Firmware, Software, Drivers, Tools, Documentation and... for Spectrum24 - 11 Mbps DS. 3. Select the latest version of the firmware and software. 4. Select Spectrum24 driver installation for Windows CE v.3.0 & Microsoft Windows for Handheld PC 2000. A File Download window appears prompting the user to run the utility from its current location or save it to disk. 5. Check the Save this program to disk option and click OK. A Save As dialog box displays prompting the user to use the default destination folder. If the default destination folder is not Desktop, select Desktop from the Save As dialog box. 6. Click Save. The S24_WINCE_DS11.exe icon displays on the desktop computer. 7. Double-click on the S24_DS11 icon on the desktop computer. The Welcome to Spectrum24 for Windows CE Setup dialog box displays. 8. Click Next. The Choose Destination Location dialog box displays. 9. Click Next to use the default destination folder or click Browse to specify a different location for the Win CE driver files. 10.Click Next. The Setup Complete dialog box displays. 11.Click Finish. 12.Click Yes to use the default application install directory when the Installing Application dialog box displays. 13.Click OK when the Application Downloading Complete dialog box displays. The NCPA Spectrum24 Easy Setup dialog box appears on the handheld device when the file download is done. 14.Enter the network ESSID in the Spectrum24 Easy Setup dialog box. Note: When users insert the CFWL adapter in a handheld computer for the first time, an Unidentified PC Card Adapter window could display. Assign a name to the card and click OK. harmful interference in which case the user will be required to correct the interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that which the receiver Increase the separation between the equipment and receiver. is connected. Warning: This device was tested for typical body-worn operations placed 2 cm from the body. To comply with RF Exposure Requirements, a minimum separation of 2 cm must be maintained between the user's body and the device, including the antenna. The use of non-tested accessories may not comply with FCC RF Exposure requirements and should be avoided. Radio Frequen cy Interfe rence Requireme nts - Cana da This Class B digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la Classe B respecte toutes les exigences du Reglement sur le Matriel Brouilleur du Canada. If the modem causes harm to the telephone network, the telephone company will notify you in advance; however, if advance notice is not practical, you will be notified as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. European Econo mic Area The European variant is intended for use throughout the European Economic Area, however authorization for use restricted as follows:

European standards dictate maximum radiated transmit power of 100m W EIRP and frequency range 2.400 - 2.4 835 GHz France, the equipment is to be restricted to the 2.4465 - 2.4 835 GHz frequency range Belgium outside, the equipment is to be restricted to the 2.460 - 2.4835 GHz freuency range Operation in Italy requires a user license. Declar ation of Con formit y We, Symbol Technologies Inc. of O ne Symbol Plaza, Holtsville, NY 117 42-1300, USA declare under our sole responsibility that the product Spectrum24HR, LA-4137, 11 Mbps Type II Radio Card To which this product relates, is in conformity with the following standards and/or other normative documents. EN 300 328 v1.1.1(2000-07) Radio; 2.4GHz Spread Spectrum EN 301 489 -1 v1.2.1 (7-2000) Part 1: EMC, Common technical requirement EN 301 489 -17 v1.1.1 (9-2000 ) Part 17: Specific conditions for wide-band data. EN 60750: 1992 Uncl. 1-4, 11: Safety of information Technology Equipment. We hereby declare that all essential radio test suites have been carried out and that the above named product is in conformity to all essential requirements of Directive 1999/ 5/EC. The conformity assessment procedure referred to in Article 10(5) and detailed in Annex IV of Directive 1999/ 5/ EC has been followed with the involvement of the following Notified Body(ies):

BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ Identification Mark:

0168 The equipment also carries the Class 2 equipment identifier The technical documentation relevant to the above equipment can be made available for inspection on application to:

Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UK Dornu Narnor

(name)

(title) Senior Director, Regulatory

(signature of authorised person) (date) 7 September 2000 Customer Suppor t Symbol Technologies provides its customers with prompt and accurate customer support. Use the Symbol Support Center as the primary contact for any technical problem, question or support issue involving Symbol products. If the Symbol Customer Support specialists cannot solve a problem, access to all technical disciplines within Symbol becomes available for further assistance and support. Symbol Customer Support responds to calls by email, telephone or fax within the time limits set forth in individual contractual agreements. When contacting Symbol Customer Support, please provide the following information:

model number or product name No rth Am erican Contacts Inside North America, contact Symbol at:

software type and version number. serial number of unit Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 Telephone: 1-516-738-2400 / 1-800 -SCAN 23 4 Fax: 1-516-738-5990 Symbol Support Center:

Telephone: 1-800-653-5350 Fax: (516) 563-5410 Email: support@symbol.com Internat ion al Con tacts Outside North America, contact Symbol at:

Symbol Technologies Technical Support 12 Oak lands Park Berkshire, RG41 2FD, United Kingdom Tel: 011-44-118-945-7000 or 1-5 16-738-2400 ext. 6213 Regu lato ry Comp liance Symbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the user authority to operate the equipment. Radio Frequen cy Interfe rence Requirem ents This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. O peration of this equipment in a residential area is likely to cause

MC9000-G Quick Start Guide http://www.symbol.com/mc9000g See Product Reference Guide for more information Battery Insertion Microphone Optional Display Indicator LED Bar Scan Button Keypad Power Headphone Jack Optional Trigger Strap Lanyard Stylus Removal Stylus Stored in handle A A E E R R A A K K R R O O W W N N I I T T S S O O P P Battery Removal 2 1 3 1 Snap-on Accessory Installation Data Power Data Power Cable Adapter Module Magnetic Stripe Reader Charging Instructions

= LED Indicator Location Slow Flash = Normal Charge Solid Amber = Full Charge Fast Flash = Charging Error Four Slot Spare Battery Charger Single Slot Serial Cradle Four Slot Cradles Charge-Only Cradle and Ethernet Cradle

wy anane MB/FCC SAR Statement/MC9050_MC9010 EMEA Division 18 August 2003 BABT 34 Molesey Road Walton on Thames Surrey KT12 4RQ

- Company: Symbol Technologies, Inc.

- Product Type: MC9050 & MC9010 The statement in the user guide Regulatory Information Sheet will be amended to reflect the following words. This device was tested for typical body-worn operation. A minimum separation distance of 1cm must be maintained between this device and the body. The use of third- party belt- clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of these accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided. Sincerely, Mice Bll Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: Marco.Belli@uk.symbol.com SYMBOL TECHNOLOGIES EMEA, A Division of Symbol Technologies Limited Symboi Place, Winnersh Triangle, Berkshire, England RG41 5TP Telephone: +44 (0) 118 945 7000 Fax: +44 (0} 118 945 7500 Website: www.symbol.com Registered Office:

Symbol Place, Winnersh Triangle, Berkshire RG41 5TP Registration No. 1096253 - England

Snapper Bluetooth Module Users Guide There is no Snapper Bluetooth Module Users Guide as it is only intended for use in Symbol products only.

Revision A August 2003 72-63697-01 http://www.symbol.com/manuals. For the latest version of this guide go to:

1Customer support is available 24 hours a day, 7 days a week. Distributor Operations Europe/Mid-East Sales Support Latin America

+44 118 945 7360 Contact local distributor or call

+1-954-255-2610 Outside US 1-800-347-0178 Inside US 84452900 Sweden/Sverige Spain/Espaa Norway/Norge Mexico/Mxico Germany/Deutchland Finland/Suomi Austria/sterreich Asia/Pacific Canada 11-8095311 315-271700 2-484441 01-40-96-52-21 7020-1718 1-800-672-906 0800 328 2424 1-631-738-2400 1-800-653-5350 South Africa Netherlands/Nederland Italy/Italia France Denmark/Danmark Australia United Kingdom United States1 Outside Spain

+34 91 324 40 00 Inside Spain 91 324 40 00

+47 2232 4375 5-520-1835 6074-49020 9 5407 580 1-505-5794-0

+65-6796-9600 905-629-7226 there is a problem with the equipment, they will contact the Symbol Support Center:

If you have a problem running your unit or using your equipment, contact your facilitys Technical or Systems Support. If Before you use the unit, it must be configured to operate in your facilitys network and run your applications. Service Information exceed the purchase price of said Product or the fair market value of said service, except in instances of injury to persons or property. Sellers liability for damages to Buyer or others resulting from the use of any Product or service furnished hereunder shall in no way to, special, indirect or consequential damages arising out of or in connection with the use or performance of the Product or service. The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages, including but not limited NOT APPLY. SUCH STATES OR COUNTRIES, FOR SUCH PRODUCTS, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER DISCLAIMS ALL WARRANTIES warranty provisions apply to any expendable or consumable items, such as batteries, supplied with the Product. within the specified operational and environmental parameters set forth in the applicable Product specification; nor shall the above

(iii) which has been subjected to unusual physical or electrical stress, abuse, or accident, or forces or exposure beyond normal use approved or supplied by Symbol, or failure to perform operator handling and scheduled maintenance instructions supplied by Seller;

normal wear and tear, misuse, negligence, improper storage, water or other liquids, battery leakage, use of parts or accessories not altered or modified, except by Sellers authorized service personnel; (ii) in which the defects or damage to the Product result from

(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been repaired, tampered with, been repaired or replaced by Seller. provided in Section C above, the aforementioned provisions do not extend the original warranty period of any Product that had either

(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from a repair service as of the Product. restoration or reinstallation of any software programs or data other than the software, if any, installed by Seller during manufacture Seller is not responsible for any damage to or loss of any software programs, data or removable data storage media, or the that Seller determines is not eligible for warranty repair. No charge will be made to Buyer for replacement parts for warranty repairs. return shipment charges for product returned where Seller determines there is no defect (No Defect Found), or for product returned associated with this transportation; return shipment to the Customer will be at Seller's expense. Customer shall be responsible for depot basis with prior Seller authorization. Customer is responsible for shipment to the Seller and assumes all costs and risks sole obligation of Seller for defective hardware Products is limited to repair or replacement (at Sellers option) on a return to service returned products and that have been tested as meeting applicable specifications for equivalent new material and Products. The

(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies that originate from of the original warranty period, whichever is longer. repaired component of the Product for a period of thirty (30) days from the shipment date of the repaired Product, or until the end repairs covered by warranty, the repair services provided are warranted against defects in workmanship and materials on the

(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement, including Spare parts may be new or originate from returned units under the conditions set forth in subsection D below. Products) are warranted against defects in workmanship and materials for a period of thirty (30) days from the date of shipment.

(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance of effect at the time of purchase or in the accompanying software license. remanufactured products, and reconditioned or upgraded products, shall be as provided in the applicable Product specification in integrated installed systems, Product modified or designed to meet specific customer specifications (Custom Products), Product remains unmodified and is operated under normal and proper conditions. Warranty provisions and durations on software, materials for a period of three (3) months from the date of shipment, unless otherwise provided by Seller in writing, provided the

(A) Warranty Symbol Technologies (hereafter Seller) hardware Products are warranted against defects in workmanship and Warranty END-USER LICENSE AGREEMENT You have acquired a device (DEVICE) that includes software licensed by Symbol Technologies, Inc. from Microsoft Licensing Inc. or its affiliates (MS). Those installed software products of MS origin, as well as associated media, printed materials, and online or electronic documentation (SOFTWARE) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SYMBOL TECHNOLOGIES, INC. FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

You may use the SOFTWARE only on the DEVICE. NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. SYMBOL TECHNOLOGIES, INC. HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON SYMBOL TECHNOLOGIES, INC. TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE. NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided AS IS and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. If you use the DEVICE to access or utilize the services or functionality of Microsoft Windows Server products

(such as Microsoft Windows NT Server 4.0 (all editions) or Microsoft Windows 2000 Server (all editions)), or use the DEVICE to permit workstation or computing devices to access or utilize the services or functionality of Microsoft Windows Server products, you may be required to obtain a Client Access License for the DEVICE and/

or each such workstation or computing device. Please refer to the end user license agreement for your Microsoft Windows Server product for additional information. ActiveSync Software. Your DEVICE package may include software contained on a CD ROM disc containing the ActiveSync connectivity technology for the personal computer (ActiveSync). If ActiveSync is included with your DEVICE, you may install and use the component(s) of ActiveSync in accordance with the terms of the end user license agreement provided with such component(s). If no separate end user license agreement is provided, you may install and use only one (1) copy of such component(s) on a single computer with which you use the DEVICE. Note on Compatibility of ActiveSync. Notwithstanding any online help files or other online information displayed by ActiveSync, neither Microsoft Licensing Inc. nor its suppliers (including Microsoft Corporation) represents or makes any warranty that ActiveSync will operate in a specific manner or operate with any computer or computing device, whether or not such computer(s) or computing device(s) contain Microsoft Windows Operating System software or Microsoft Windows CE Operating System software. Note on Java Support. The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems, Inc. has contractually obligated MS to make this disclaimer. No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00). Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. Additional Software. Any SOFTWARE provided to you by Symbol Technologies, Inc. or MS which updates or supplements the original SOFTWARE is governed by this EULA unless alternative terms are provided with such updates or supplements. RECOVERY MEDIA. If SOFTWARE is provided by Symbol Technologies, Inc. on separate media and labeled Recovery Media you may use the Recovery Media solely to restore or reinstall the SOFTWARE originally installed on the DEVICE. SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the DEVICE, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE. EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is of US-origin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the SOFTWARE, see http://www.microsoft.com/exporting/. Licensing, Patent and Regulatory Information For Embedded Windows CE .NET MC9000-G 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Symbol products. Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com Patents This product is covered by one or more of the following U.S. and foreign Patents:

U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350;

4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445;

5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167;

5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164;

5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846;

5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042;

5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093;

5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139;

5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863;

5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064;

5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025;

5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892; 6,050,491;

6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712;

6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788;

6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990;

6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501;

D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548;

D423,468; D424,035; D430,158; D430,159; D431,562; D436,104. Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299;

414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 rev. 06/02 Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the users authority to operate the equipment. Radio Modules This device contains approved radio modules. These modules are identified below. Symbol Compact Flash RLAN (11Mbps DSSS) radio card, Type: LA-4137 or Symbol PCMCIA RLAN (2Mbps FH) radio card, Type: LA-3021 This device contains a Bluetooth qualified module, Bluetooth ID: B01039 Symbol Bluetooth Module RLAN radio module, Type: 21-58466 The 11Mbps version of this device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Health and Safety Recommendations Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. Scanner Labeling LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2 LUMIRE LASER -NE PAS REGARDER DANS LE FAISCEAU APPAREIL LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 630-680 nM, 1 mW Power Supply Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und minimum 2A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben FCC Exposure Guidelines Safety Information The device complies with Internationally recognised standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Reducing RF Influence - Use Properly It is advisable to use the device only in the normal operating position and it is recomended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Handheld Devices This device was tested for typical body-worn operation. The use of third-party belt-clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of these accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided. Laser Devices Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Laser Labels In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:

ENGLISH CLASS 1 CLASS 2 CLASS 1 LASER PRODUCT LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH / DANSK KLASSE 1 KLASSE 2 KLASSE 1 LASERPRODUKT LASERLYF SE IKKE IND I STRLEN KLASSE 2 LASERPRODUKT DUTCH / NEDERLANDS KLASSE 1 KLASSE 2 KLASSE-1 LASERPRODUKT LASERLICHT NIET IN STRAAL STAREN KLASSE-2 LASERPRODUKT FINNISH / SUOMI LUOKKA 1 LUOKKA 2 LUOKKA 1 LASERTUOTE LASERVALO L TUIJOTA SDETT LUOKKA 2 LASERTUOTE FRENCH / FRANAIS CLASSE 1 CLASSE 2 PRODUIT LASER DE CLASSE 1 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 GERMAN / DEUTCH KLASSE 1 KLASSE 2 LASERPRODUKT DER KLASSE 1 LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 HEBREW ITALIAN / ITALIANO CLASSE 1 CLASSE 2 PRODOTTO AL LASER DI CLASSE 1 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN / NORSK KLASSE 1 KLASSE 2 LASERPRODUKT, KLASSE 1 LASERLYS IKKE STIRR INN I LYSSTRLEN LASERPRODUKT, KLASSE 2 PORTUGUESE / PORTUGUS CLASSE 1 CLASSE 2 PRODUTO LASER DA CLASSE 1 LUZ DE LASER NO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 SPANISH / ESPAOL CLASE 1 CLASE 2 PRODUCTO LASER DE LA CLASE 1 LUZ LASER NO MIRE FIJAMENTE EL HAZ PRODUCTO LASER DE LA CLASE 2 SWEDISH / SVENSKA KLASS 1 KLASS 2 LASERPRODUKT KLASS 1 LASERLJUS STIRRA INTE MOT STRLEN LASERPRODUKT KLASS 2 Radio Frequency Interference Requirements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. CE Marking and European Economic Area (EEA) RLAN's (2.4GHz) for use through the EEA have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz France, equipment is restricted to 2.4465 -2.4835 GHz frequency range Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range Italy requires a user license for outside usage. Bluetooth for use through the EEA have the following restrictions:

Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835 GHz Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range Italy requires a user license for outside usage. Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may be obtained from: http://www2.symbol.com/doc/

Other Countries Mexico Israel Sri Lanka Restrict Frequency Range to: 2.450 - 2.4835 GHz. Restrict Frequency Range to: 2.418 - 2.457 GHz. Restrict Frequency Range to: 2.400 - 2.430 GHz.