FCC ID: CASTPDH7A Portable Handheld Transceiver

 

TP9300 DMR Portable Radios Users Guide MPD-00001-02 Issue 2 September 2013 (DRAFT) Contents For your safety...................................................... 10 Menu maps............................................................ 20 1 About this guide .................................................. 22 Safety warnings used in this guide ................................. 22 Related documentation................................................... 22 2 Before using your radio ...................................... 24 For your safety battery warning................................... 25 Attaching labels to the radio or battery ........................... 25 Attaching a label to the front panel............................. 26 Charging the battery before first use .............................. 26 Attaching the battery....................................................... 27 Removing the battery ..................................................... 27 Attaching the antenna..................................................... 27 Removing the antenna ................................................... 28 Attaching a belt clip ........................................................ 28 Removing a belt clip ....................................................... 28 Installing an accessory ................................................... 28 3 Getting started ..................................................... 30 About your DMR digital radio...................................... 31 Lack of static noise..................................................... 31 Coverage.................................................................... 31 About the radio controls.................................................. 31 Understanding the radio display ..................................... 33 Radio display icons .................................................... 34 Understanding the radio indicators................................. 35 Status indicators......................................................... 36 Audible tones.............................................................. 36 Using function keys to access frequently used features. 38 Viewing the function key settings ............................... 38 Navigating the radios menus ......................................... 39 Using the Main menu ................................................. 39 Accessing frequently used menus.............................. 40 Using the alphanumeric keys to search a list ................. 41 4 Basic operation .................................................... 42 Turning the radio on and off ........................................... 43 Security lock on power-up feature.............................. 43 Adjusting the speaker volume ........................................ 44 Locking and unlocking the keypad ................................. 44 Contents 3 Using a wireless headset ............................................... 44 Wearing the headset .................................................. 45 Pairing a wireless headset with the radio................... 45 Managing your headsets............................................ 47 Changing the radios operating mode ............................ 49 5 Operating in trunked mode .................................51 Checking that your network is available......................... 52 Changing your network .................................................. 52 Dialing a new network ................................................ 53 Making a preset call ....................................................... 53 Dialing a preset call.................................................... 54 About trunked zones and workgroups............................ 54 Selecting a zone......................................................... 55 Selecting a workgroup................................................ 55 Making a call to a workgroup ..................................... 56 Selecting the homegroup ........................................... 56 Scanning workgroups................................................. 57 About emergency operation ........................................... 57 Making a preset emergency call ................................ 58 Dialing an emergency call .......................................... 59 Activating emergency mode....................................... 59 Cancelling emergency mode...................................... 59 Dialing a PABX number.................................................. 60 Dialing a PSTN number.................................................. 60 Receiving a call .............................................................. 60 Call time limit.............................................................. 61 Re-establishing a call ..................................................... 61 Last number recall...................................................... 62 Unanswered call......................................................... 62 Callback ..................................................................... 62 Checking missed calls.................................................... 62 Accessing the call queue ........................................... 63 Changing your call queuing setting ............................ 63 About status messages.................................................. 64 Selecting a status message ....................................... 64 Sending a status message......................................... 64 Dialing a status message ........................................... 66 About trunked text messages......................................... 66 Using the alphanumeric keys to enter text ................. 66 Sending a preset text message.................................. 67 Editing a draft text message....................................... 68 Creating a new text message..................................... 68 Sending a text message............................................. 69 4 Contents Placing the radio in do-not-disturb mode........................ 69 Using a function key ................................................... 69 Using the Main menu ................................................. 70 Calls to conventional channels or conventional groups.. 70 6 Dialing calls in trunked mode ............................. 71 MPT 1343 dialing............................................................ 72 Finding your radios MPT number .............................. 72 MPT 1343 dialed calls ................................................ 73 Nokia ANN fleet calls...................................................... 74 Finding your radios MPT number .............................. 74 Nokia ANN dialed calls............................................... 75 Accessing common trunking functions ........................... 76 7 Operating in conventional mode ........................ 78 Selecting a zone ............................................................. 79 Selecting a channel ........................................................ 79 Selecting a group............................................................ 80 Checking that a channel is clear..................................... 82 Making a call................................................................... 82 Making a call using the address book ............................ 83 Making a local call .......................................................... 84 Connecting to a telephone network ................................ 85 Making an emergency call.............................................. 87 Sending a status message ............................................. 87 Transmitting at low power............................................... 88 Ending active calls.......................................................... 89 Activating the repeater before a call ............................... 90 Communicating directly with other radios....................... 91 Receiving a call .............................................................. 92 Receiving a text message .............................................. 92 Hearing faint and noisy signals....................................... 93 Using the radio in different repeater areas ..................... 94 Scanning a group of channels ........................................ 95 8 Loneworker monitoring .................................... 102 Activating loneworker monitoring.................................. 102 Responding to a loneworker alarm............................... 103 Delaying the emergency action (conventional mode only) .. 103 9 Customizing radio settings .............................. 105 Changing the volume of all audible indicators .............. 105 Changing the volume of keypress tones ...................... 106 Changing to quiet operation ......................................... 106 Changing to silent operation......................................... 107 Turning on backlighting ................................................ 107 Contents 5 Turning backlighting on momentarily ....................... 108 10 Charging and caring for batteries .....................109 About the chargers....................................................... 110 Before using the charger.............................................. 110 Handle the battery safely ......................................... 110 Attaching of labels.................................................... 111 Charging temperatures ............................................ 111 Temperature indications........................................... 112 Leaving the battery on charge.................................. 112 Low battery warning ................................................. 113 Charging the battery..................................................... 114 LED behavior ........................................................... 115 Removing the battery from the charger.................... 115 Maintaining battery life and performance ..................... 116 Cleaning the contacts of the battery......................... 116 Storing batteries ........................................................... 117 Using batteries after storage .................................... 117 Disposing of batteries................................................... 117 11 Troubleshooting .................................................118 About troubleshooting .................................................. 119 When your radio wont turn on ................................. 119 Identifying the radios audible tones......................... 119 Checking the version of your radio............................... 120 General care................................................................. 120 Cleaning the contacts of the battery......................... 121 Cleaning the radio .................................................... 121 Directive 1999/5/CE Declaration of Conformity 122 Tait Software Licence Agreement......................123 6 Contents Copyright and trademarks All information contained in this document is the property of Tait Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Limited. The word TAIT and the TAIT logo are trademarks of Tait Limited. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this document. Tait Limited accepts no responsibility for damage arising from use of the information contained in the document or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. Enquiries and comments If you have any enquiries regarding this document, or any comments, suggestions and notifications of errors, please contact your regional Tait office. Updates of manual and equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait Limited reserves the right to update the equipment or this document or both without prior notice. Intellectual property rights This product may be protected by one or more patents or designs of Tait Limited together with their international equivalents, pending patent or design applications, and registered trade marks: NZ 409837, NZ 409838, NZ 415277, NZ 415278, NZ 508806, NZ 508807, NZ 511155, NZ 516280/NZ 519742, NZ 520650/NZ537902, NZ 521450, NZ 524369, NZ 524378, NZ 524509, NZ 524537, NZ 530819, NZ 534475, NZ 534692, NZ 537434, NZ 547713, NZ 569985, NZ 577009, NZ 579051, NZ 579364, NZ 580361/NZ 601933, NZ 584534, NZ 586889, AU 2003281447, AU 2004216984, 7 AU 2010212364, AU 11677/2008, AU 13745/2008, CN 200930004199.5, CN 1031871, CN 1070368, CN 200930004200.4, CN 200930009301.0, CN 201110141630, CN 201110253742.1, EU 000915475-

0001, EU 000915475-0002, GB 2413249, US 5,745,840, US 7,649,893, US 7,758,996, US7,937,661, US 8,301,682, US 10/597339, US 29/401234, US 29/401235, US 61/218015, US 61/236663, US 61/323437. This product may also be made under license under one or more of the following U.S. Patents: 5,146,497, 5,148,482, 5,164,986, 5,185,795, 5,185,796, 5,271,017, 5,377,229 and 5,502,767. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. Protected by U.S. Patents 5,870,405, 5,826,222, 5,754,974, 5,701,390, 5,715,365, 5,649,050, 5,630,011, 5,581,656, 5,517,511, 5,491,772, 5,247,579, 5,226,084 and 5,195,166. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait Limited is under licence. Other trademarks and trade names are those of their respective owners. Environmental responsibilities Tait Limited is an environmentally responsible company which supports waste minimization, material recovery and restrictions in the use of hazardous materials. The European Unions Waste Electrical and Electronic Equipment (WEEE) Directive requires that this product be disposed of separately from the general waste stream when its service life is over. For more information about how to dispose of your unwanted Tait product, visit the Tait WEEE website at www.taitradio.com/weee. Please be environmentally responsible and dispose through the original supplier, or contact Tait Limited. Tait Limited also complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive in the European Union. In China, we comply with the Measures for Administration of the Pollution Control of Electronic Information Products. We will comply with environmental requirements in other 8 markets as they are introduced. 9 For your safety Before using your radio, please read the following important safety and compliance information. Radio frequency exposure information For your own safety and to ensure you comply with the Federal Communication Commissions (FCC) radio frequency (RF) exposure guidelines, please read the following information before using this radio. Using this radio You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to. It is also important that you:

Do not remove the RF Exposure label from the radio. Ensure this RF exposure information accompa-

nies the radio when it is transferred to other users. Do not use the radio if you do not adhere to the guidelines on controlling your exposure to RF. Controlling your exposure to RF energy This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure. 10 For your safety To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:

Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rap-

idly the further away the antenna is from your body. Keep the antenna at least one inch (2.5 cm) from your face at all times. If you wear your radio, you must always put it in a carrying accessory that has been specifically approved by Tait for this radio. Using non-

approved body-worn accessories may mean you expose yourself to higher levels of RF than recom-

mended by the FCCs occupational/controlled environment RF exposure limits. Ensure you only use Tait-approved antennas, bat-

teries, and accessories. For more information on what RF energy is and how to control your exposure to it, visit the FCC website at www.fcc.gov/oet/rfsafety/rf-faqs.html. Compliance with RF energy exposure standards This two-way radio complies with these RF energy exposure standards and guidelines:

United States Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, and 2.1093. For your safety 11 American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1992. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1999 Edition. European Directive 2004/40/EC on minimum health and safety requirements regarding the exposure of workers to the risks arising from phys-

ical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen. Conformit aux normes dexposition lnergie RF Cette radio metteur-rcepteur se conforme aux normes et aux rglements dexposition lnergie RF :

La Commission fdrale de la communication des Etats-Unis, Code de rglements fdraux (CFR) Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios mobiles) ou 2.1093 (radios portatives). American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-1992. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1999 Edition. La directive europenne 2004/40/EC concernant les prescriptions minimales de scurit et de san-

t relatives l'exposition des travailleurs aux ris-

ques dus aux agents physiques (champs lectromagntiques). Cette radio se conforme aux limites dexposition de lIEEE (FCC) et ICNIRP pour les environnements dexposition au rayonnement RF professionnel et contrl aux cycles de marche de 50% en mode transmission et 50% en mode rception. 12 For your safety Radio frequency emissions limits in the USA CFR Title 47 Part 15.19 (a) (1) -

Receivers Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CFR Title 47 Part 15.19 (a) (3) - All other devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Radio frequency emissions limits in the Canada This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For your safety 13 USA public safety bands

(764 776 MHz and 794 806 MHz) The Code of Federal Regulations (CFR) Title 47 Subpart R deals with the use of frequencies in the 764 to 776 MHz and 794 to 806 MHz bands. Low-power channels This radio complies with 90.531 (b) (3) and 90.531 (b) (4) of 47 CFR. These sections state that only low-power transmission is permitted on the following channels:

Regional Planning channels, as defined in 90.531 (b) (3). Itinerant channels, as defined in 90.531 (b) (4). Use of encryption This radio complies with 90.553 (a) of 47 CFR. This states that:

Encryption is not permitted on the nationwide Interoperability calling channels. These channels are defined in 90.531 (b) (1) (ii). Radios using encryption must have a readily accessible switch or control to allow the radio user to disable encryption. EMC regulatory compliance in Australia This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at www.acma.gov.au. 14 For your safety Frequency band reserved for distress beacons Frequency band 406 to 406.1 MHz is reserved for use by distress beacons. Transmissions should not be made within this frequency band. Health, safety and electromagnetic compatibility in Europe In the European Community, radio and telecommunications equipment is regulated by Directive 1999/5/EC, also known as the Radio and Telecommunications Terminal Equipment (R&TTE) directive. The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. Intended purpose of product This product is an FM radio transceiver. It is intended for radiocommunication in the Private Mobile Radio

(PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA). Restrictions This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state. This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license requirements must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission. For your safety 15 Declaration of conformity Brief Declarations of Conformity appear on on page 122 of this booklet. To download the formal declaration of conformity, go to http://

eudocs.taitradio.com/. Interference with electronic devices Warning Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are:

aircraft electronic systems vehicular electronic systems such as fuel injec-

tion, anti-skid brakes, and cruise control medical devices such as pacemakers and hearing aids medical equipment in hospitals or health care facilities. Switch off the radio before boarding an aircraft. Using your radio while in the air is not permitted. Consult the manufacturer (or its representative) of any such electronic devices to determine whether electronic circuits in those devices will perform normally when the radio is transmitting. Warning If you have a pacemaker:

immediately turn off the radio if you suspect it is interfering with the pacemaker keep the radio at least 6 inches (15 cm) from the pacemaker while the radio is on use the radio on your right side to minimize inter-

ference never carry the radio in a breast pocket. 16 For your safety If there is interference between your hearing aid and the radio, please discuss an alternative solution with the hearing aid manufacturer. Potentially explosive atmospheres and blasting areas Warning Unless the radio is specifically certified for use in a potentially explosive atmosphere, turn off the radio before entering such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include filling stations, and any environment where there are flammable liquids, gases, or dusts. Warning Turn off the radio before approaching blasting caps, a blasting area, or any area where you are instructed to turn off a two-way radio. Obey all signs and instructions. Interference with blasting operations could cause serious injury or death. Radio installation and operation in vehicles Warning Keep the radio away from airbags and airbag deployment areas. Do not install, charge, or place a radio near such areas. An activated airbag can propel a portable radio with sufficient force to cause serious injury to vehicle occupants. An airbag may not perform to specification if obstructed by a radio. Warning To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or battery cables, refer to the installation guide for the radio, and to the vehicle manufacturers manual, before installing electronic equipment in the vehicle. Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. For your safety 17 Vehicle charger installation and operation For detailed instructions necessary to the safe installation and operation of the vehicle charger, please refer to the documentation supplied with the vehicle charger. Multicharger safety information Warning This device must be connected to an earthed mains socket-outlet. Norsk (no): Apparatet m tilkoples jordet stikkontakt. Suomi (fi): Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Svenska (sv): Apparaten skall anslutas till jordat uttag. Electromagnetic compatibility in European vehicles In the European Community, radio equipment fitted to automotive vehicles is regulated by Directive 72/245/

EEC and its amendments. The requirements of this directive cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. Unapproved modifications or changes to radio The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait. Failure to do so could invalidate compliance requirements and void the users authority to operate the radio. 18 For your safety Attaching of labels Warning Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Caution Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. If you must attach a customized label, use only a thin gummed paper label applied to the bottom 25% of the radio chassis label and/or to the top 25%

of the battery label. Do not obstruct the vent holes

(see Warning above). Do not allow the paper label to extend beyond the recessed label area or to conceal relevant product information. Use of lithium-ion batteries Warning A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Short-circuiting battery contacts Warning Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuiting the battery contacts can heat up the conductive material and cause personal injury and/or damage to property. For your safety 19 Menu maps This section shows the menus and submenus that may be programmed for your radio. Some features are controlled by software licenses and may not be available with your model. Main menu (trunked mode) Preset calls Set zone Set workgroup Go to homegroup Scanning Send Status Text message Radio settings Scrambler Lock radio VOX VOX sensitivity Call settings Functions Call queuing Do not disturb Extra features Lone worker Alert settings Indicator level Keypress tones Quiet operation Silent operation Display settings Backlighting Contrast adjust Channel display RSSI Radio info Trunked ID Key settings Version info Customer info Serial number Call groups GPS info Change network Change mode Diagnostics

*This menu item may appear as Group select

** This menu item may appear as Edit groups. Preset message Edit message New message Dispatcher call Broadcast call Send group Send to preset Send to dialed Conference call Send group Send to preset Send to dialed Priority call Emergency call Send dispatcher Send to preset Send to dialed Send dispatcher Send to preset Send to dialed Wireless headset Connect Reconnect last Disconnect Connection info Manage headsets Find new devices Options Power-on option Auto-connect Workgroup setup*

My Workgroups**

Set homegroup Subscribe all Unsubscribe all 20 Menu maps Advanced Program groups Set scan key GPS info Change mode Main menu (conventional mode) Channels Zones Address book Local calls Set status Dial radio call Dial patch call Wireless headset Connect Reconnect last Disconnect Connection info Manage headsets Find new devices Options Power-on option Confirm connect Functions Radio settings Scrambler Lock radio Low power tx Monitor Squelch oride VOX VOX sensitivity Repeater Talkaround Call settings Ignore 2-tone Extra features Lone worker Alert settings Indicator level Keypress tones Quiet operation Silent operation Display settings Backlighting Contrast adjust RSSI Radio info Key settings Version info Customer info Serial number Menu maps 21 1 About this guide This users guide provides information about the TP9300 portable radios. If your radio does not operate as you expect, contact your radio provider for assistance. Safety warnings used in this guide Please follow exactly any instruction that appears in the text as an alert. An alert provides necessary safety information as well as instruction in the proper use of the product. This users guide uses the following types of alert:

Warning This alert is used when there is a hazardous situation which, if not avoided, could result in death or serious injury. Caution This alert is used when there is a hazardous situation which, if not avoided, could result in minor or moderate injury. Notice This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. Related documentation The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website

(http://support.taitradio.com):

22 About this guide Safety and Compliance Informationsupplied with each radio. (The same information is included in this users guide.) Li-ion Battery Safety Informationsupplied with each Li-ion battery. Battery Care and Charging Guidesupplied with each charger. (The same information is in the sec-

tion "Charging and caring for batteries".) About this guide 23 2 Before using your radio Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time allow 2.5 hours for this. This section covers:

For your safety battery warning Attaching labels to the radio or battery Charging the battery before first use Attaching the battery Removing the battery Attaching the antenna Removing the antenna Attaching a belt clip Removing a belt clip Installing an accessory 24 Before using your radio For your safety battery warning Warning This radio uses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. Attaching labels to the radio or battery Warning Do not cover the battery vent hole or the vent hole on the radio chassis. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Notice Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Before using your radio 25 Attaching a label to the front panel If a customer requires an additional label, attach the label in the spare label recess in the bottom edge of the radio front panel. In this position, the label is still visible while the battery is attached to the radio. spare label recess The diagram below shows the specified dimensions of the label. n

) i m m 7

8 2 0

. R0.13 in

(3.2 mm) 1.22 in (31 mm) maximum label thickness: 0.03 in Charging the battery before first use Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section Charging and caring for batteries on page 109. For best charging performance, switch off the radio before placing it in the charger. 26 Before using your radio Attaching the battery Notice Fit the bottom edge of the battery to the radio, then the top edge. Attempting to fit the top edge first may damage the contacts. 1 Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. 2 Holding the radio firmly, align the back of the battery with the back of the chassis. 3 Place the two lugs at the bottom edge of the battery into the two slots in the bottom of the front panel. 4 Lightly press the top of the battery towards the radio until the battery catch clicks. 5 Make sure that the battery is firmly in position. Removing the battery The battery is secured to the radio by a battery catch in the radios rear panel. To remove the battery from the radio, so that the battery can be charged or replaced:

1 Slide the battery catch up. 2 From the sides, pull the battery away from the radio. Attaching the antenna Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it doesnt unscrew easily. Before using your radio 27 Removing the antenna Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it. Attaching a belt clip To attach a belt clip to the radio:

1 Slide the belt clip into the two grooves at the top of the battery. 2 Press down on the belt clip until it snaps into place. Removing a belt clip The belt clip has been designed to prevent accidental removal, but you can take it off, if required. To remove a belt clip from a battery:

1 Insert a flat screwdriver blade or similar flat object under the lip of the release lock (that is, between it and the metal slider). 2 Lift the release lock up (away from the metal slider) and hold it in position. 3 Slide the belt clip out. Installing an accessory Accessories plug into the radios accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. Notice The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an accessory:

28 Before using your radio 1 Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio. 2 Remove the accessory cover and store it in a safe place. 3 Plug the accessory into the accessory connector. 4 Tighten the screw. Before using your radio 29 3 Getting started This section gives an overview of your DMR radio, describes the radios controls and indicators, and explains how the radio menus are organized. This section covers:

About your DMR digital radio About the radio controls Understanding the radio display Understanding the radio indicators Using function keys to access frequently used fea-

tures Navigating the radios menus Using the alphanumeric keys to search a list 30 Getting started About your DMR digital radio Your digital radio may be programmed for DMR

(digital) trunking, MPT (analog) trunking, or both (dual mode). Dual mode networks are able to receive both digital and analog calls. Fully-featured conventional analog operation is also available. You may notice differences between analog and digital calls in terms of:

static noise in low signal areas, and radio coverage in marginal reception areas. Lack of static noise On digital networks there is no static noise, even in low signal areas. This lack of static is because your digital radio removes the noise from the call, so that you hear only clear voice. Coverage With analog networks, the background noise in a call gets progressively worse when you are in fringe areas or even slightly outside normal coverage areas. With digital networks, a call remains clear and then drops off quickly at the border of a coverage area. The reason for this is that a digital call is either received or it isn't. About the radio controls The radio controls are the PTT key, power/volume control, channel selector, 3-way selector control

(optional), scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses:

a short key press is less than one second, and a long key press is more than one second. Getting started 31 The radio controls and their functions are described in the following sections. 3-way selector control (optional) power / volume control function key 2 PTT key

(press-to-talk) function key 3 function key 4 left selection key channel function key 1 status LED speaker /

microphone display scroll keys right selection key alphanumeric keys 32 Getting started Name PTT key Power/volume control Channel selector 3-way selector

(optional) Left and right selection keys Scroll keys Function Press and hold to transmit and release to listen Rotate to turn the radio on and change the speaker volume Select and change channels Select frequently used features Action determined by the text above the selection key Scroll up and down through a list of menu options, scroll left and right in messages, or select the Quick Access menu Function keys Programmed for frequently used options Alphanumeric keys Used to enter letters and numbers Understanding the radio display The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. Getting started 33 Radio display icons These are some of the icons you may see on your radio display:

Icon Meaning Battery indicator: shows how much charge is available in the battery Scanning: your radio is monitoring a group of channels or workgroups for activity Silent operation: your radios audible tones have been turned off Low-power transmit: your radio is set to transmit on low power Transmit: your radio is transmitting Headset connected: there is a wireless headset connected to your radio Flashing: your radio is attempting to connect to a headset, or the headset connection has been lost Scrambler: the voice-inversion scrambler is turned on

(analog channels only) Signal strength indicator: the more bars, the stronger the signal being received by the radio Scrolling: you can use list, or access a Quick Reference menu or to move through a Trunked mode icons Scanning: scanning has been turned off Homegroup: your radio has been returned to the homegroup using the homegroup toggle function key Call queuing: call queuing is turned on Call queuing: there are calls in the call queue Network (flashing): your radio is registered on a DMR or MPT trunked network 34 Getting started Icon Meaning Trunking: your radio has established a call and you are now able to speak to the other party Conventional mode icons Monitor or squelch override: monitor or squelch override is turned on Scanning: your radio is monitoring a group of channels for activity, and the currently selected channel is a member of the scan group. Repeater talkaround: your radio is operating in repeater talkaround mode, or you are on a simplex channel Text message: there is no text message in the call queue Text message: there is a text message in the call queue Zone: this letter represents the zone in which your radio is operating, where A is zone 1, Z is zone 26 (for example, K represents zone 11) Understanding the radio indicators The status LED indicator and the radios audible tonestogether with the radio displayall combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. Getting started 35 Status indicators status LED Color Red

(transmit) Green

(receive) Orange

(network) All LEDs off Meaning Glowing: your radio is transmitting Glowing: the current channel is busy Flashing: you have received a call Flashing: you are registered on a trunked network Trunked: network not available, or your radio is attempting to register on a trunked network Conventional: receive standby Audible tones The radio uses audible tones to alert you to its status:

36 Getting started Radio controls and keypress tonesthe tones and beeps you hear when you press your radios keys or use the controls. Incoming call tonewhen the radio is receiving a call. Warning toneswhen there is an error, or the bat-

tery is low, for example. If quiet or silent mode is turned on, you will not hear any alert tones. Some of the more common audible tones are described below:

Tone Meaning One short beep Valid keypress: the action you have attempted is permitted Function activated: a function has been turned on (using either the Main menu or a function key) One long, low-

pitched beep Invalid keypress: the action you have attempted is not permitted Transmission inhibited: you have attempted to transmit, but for some reason you cannot make a call at this time One short, low-pitched beep Two short beeps Function deactivated: a function has been turned off (using either the Main menu or a function key) Radio turned on: the radio is powered on and ready to use Getting started 37 Using function keys to access frequently used features The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press. function key 1

(emergency key) function key 2 function key 3 function key 4 Viewing the function key settings Use the Main menu to check the features assigned to your radios function keys:

1 Press Menu and select Radio settings > Radio info >

Key settings. 2 In the Key Settings menu, scroll through the list of function keys. 3 Press Select to view details of the function associated with a particular function key. The example shown is for a function key programmed to turn backlighting on and off. Backlighting toggle Back OK 4 Press Back to return to the Key Settings menu. 38 Getting started Navigating the radios menus Your radio has a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. Using the Main menu To access the Main menu, press the right selection key whenever Menu appears above it. Channel 12 Zone 11 Lock Menu Use the scroll keys to move through the menu list. Main menu Zones Address book Back Select When the menu you want is highlighted, press Select to open the menu you have chosen. To quickly exit the menu system, press and hold the left selection key when the word Cancel or Back appears above it. Getting started 39 Accessing frequently used menus Depending on how your radio is programmed, you may have two different Quick Access menus. One Quick Access menu is displayed when you press a scroll key, and the other when you press the left selection key. These give you easy access to the menus you use most often. Using the scroll key Quick Access menu There are two ways to use this Quick Access menu:

Use the scroll keys to scroll through a list of zones or channels. Press the scroll keys and the Quick Access menu appears. In this example, the Channels menu is the Quick Access menu. Use the scroll keys to go directly to the Channels menu. Channel 12 Zone 11 Menu The Channels menu, with a list of your available channels, is now displayed. Channels Channel 1 Channel 2 Back Select 40 Getting started Using the left selection key Quick Access menu The text above the left selection key corresponds to the Quick Access menu, for example, Zones. To use this Quick Access menu:

Press the left selection key and the associated menu appears. Channel 12 Zone 11 Zones Menu Using the alphanumeric keys to search a list This feature is only available for radios with alphanumeric keys. If a blinking cursor appears when you select a list, you are able to search for the menu item you want using the alphanumeric keys. This is of particular benefit if you have a large number of items in a list. Lists that you may be able to search are channels, zones, workgroups, and preset calls. To search a list, enter the required name using the keypad. Getting started 41 4 Basic operation This section describes the basic operation of your radio, including turning on the radio, adjusting the volume, locking the keypad, using a wireless headset, and changing the operating mode of the radio. This section covers:

Turning the radio on and off Adjusting the speaker volume Locking and unlocking the keypad Using a wireless headset Changing the radios operating mode 42 Basic operation Turning the radio on and off Rotate the power/volume control switch clockwise to turn the radio on. Rotate the switch counterclockwise to turn the radio off. When the radio is first turned on, the status LED briefly glows red, and the radio gives two short beeps. Your radio may not turn on if your battery is very low. (See "Low battery warning".) Security lock on power-up feature Your radio may be automatically locked each time it is powered-up. If the message Enter PIN appears in the display, enter your assigned PIN (personal identification number). See Unlocking the radio. Locking the radio 1 Press Menu and select Radio settings >

Functions > Lock radio. (Depending on how your radio is programmed, you may be able to press a function key to turn radio lock on and off.) 2 Scroll to either On or Off and press Select.

(The current setting is highlighted.) The radio is now locked, and the message Enter PIN appears in the display. The radio remains locked until the correct sequence of keys is pressed. If you forget the unlock sequence or you do not know it, contact your radio provider for assistance. Unlocking the radio To unlock your radio, use the unlock sequence you have been given. (This is a pre-programmed sequence of four keys.) Basic operation 43 Adjusting the speaker volume Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radios audible indicators. Locking and unlocking the keypad The keypad lock feature prevents you from pressing a key accidentally. The number of keys that are locked depends on the way your radio is programmed. If you receive a call while the keypad is locked, press any key to answer. To lock the keypad:

Press and hold the right selection key for about one second.

(Depending on your radio model and the way it is programmed, your radio may have a 3-way selector that can be used to lock the keypad.) The message Keypad locked briefly appears in the display, and Unlock appears above the right selection key, in place of Menu. When any of the locked keys are pressed, the message Keypad lock active appears. To unlock the keypad:

Press and hold the right selection key for about one second. Using a wireless headset You may be able to connect a Bluetooth wireless headset to your radio, using the Wireless Headset menu or a function key. 44 Basic operation When you have selected a menu option in the Wireless Headset menu, you can still receive and reply to calls without interrupting the selected operation. Headset compatibility with Tait radios Bluetooth wireless headsets may operate with Tait radios, provided the headset:

Is compatible with the Bluetooth Specification Ver-

sion 2.0 or higher. Tait recommends Bluetooth Specification Version 2.1 or higher. Includes Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile

(HFP) version 1.5 or 1.6. Wearing the headset Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. To get the best performance from your headset:

1 Do not block the devices internal antenna (see the devices user documentation). The human body can interfere with a Bluetooth signal. 2 If you usually use your radio with your right hand, wear the headset on your right ear. 3 Avoid coming in contact with the internal antenna of a headset or radio. Pairing a wireless headset with the radio Before attempting to connect a wireless headset, Tait recommends that the headset is fully charged. Refer to the headset installation instructions for charging instructions. Basic operation 45 Pairing creates a unique and encrypted wireless link between the Bluetooth-capable radio, and the Bluetooth headset. To use a headset with your radio, the devices must first be paired. When you connect to a wireless headset for the first time, you need to instruct the radio to search for compatible headsets using Bluetooth wireless technology. The search should take less than one minute. To pair a wireless headset with the radio:

1 Turn on the radio. 2 Put the wireless headset into pairing mode. Refer to the headset installation instructions for instructions on how to do this. 3 Press Menu and select Wireless headset > Find new devices. Wireless headset Find new devices Options Back Select The New Devices menu opens, and while the radio searches for the new device, the message Searching ... appears. 4 Select Connect when the required headset appears in the list of new devices, then Yes to add the headset to My Headsets. New devices HM1100 Searching ,,, Add to My Headsets?

Cancel Connect No Yes The message Connecting appears, while the radio attempts to pair with the headset. Connecting:

HM1100 Clear 46 Basic operation 5 When the message Calling. Answer on headset appears, press the Answer button on the headset to confirm the connection. Calling. Answer on headset Headset connected Clear Cancel Clear 6 Repeat the previous steps to add other headsets. While the wireless headset is connected, the wireless headset icon appears in the display. Channel 12 Menu Managing your headsets Once a headset has been added to My Headsets, the Manage Headsets menu item appears under the Wireless Headsets menu. The Manage Headsets menu shows the headsets currently in My Headsets, along with the following information:

+ This headset is currently connected. a This headset will be automatically connected. c The radio will ask you for confirmation before connecting this headset. My Headsets BlueAnt T1V1. +a CSR-bc6 a Options Back Press Options to disconnect or connect a headset

(Disconnect, Connect), change the priority order of the headsets (Move down), or remove a headset from My Headsets (Remove, Remove all). My headsets Disconnect Move down My headsets Disconnect Move down Back Select Back Select Basic operation 47 Disconnecting the headset To disconnect the headset from your radio:

Press Menu and select Wireless headset >

Disconnect. Alternatively, in the My Headsets menu select Options > Disconnect. Reconnecting the headset Your radio may be programmed so that each time the headset is turned on, it will automatically reconnect to the radio. If the radio does not automatically reconnect to the headset:

1 On the radio, press Menu and select Wireless headset > Reconnect last. Wireless headset Connect Reconnect last Back Select The radio then prompts you to connect to the headsets in My Headsets, in priority order. Connect. HM1100?

Connect BlueAnt T1 V1?

No Yes No Yes 2 Select Yes to connect, or No to choose another headset. Changing the way your headset reconnects You can us the Power-on Option menu to change the way your radio reconnects with a headset when the radio is first turned on. The choices are:

None: The radio does not connect to any head-

sets, and you will need to manually connect or reconnect to your headset. Reconnect last: The radio connects to the previ-

ously connected headset. 48 Basic operation Connect: The radio will attempt to connect to the headsets in My Headsets, in priority order. To change the power-on option:

1 Press Menu and select Wireless headset >

Options > Power-on option, and change to the required option. Power-on option None Reconnect last Back Select Changing the radios operating mode The way your radio performs basic functions, such as sending and receiving calls, depends on the operating mode of your network. The two operating modes that may be available on your radio are:

trunked mode (see "Operating in trunked mode"

on page 51), and conventional mode (see "Operating in conven-

tional mode" on page 78). To change your operating mode:

1 Press Menu and select Change mode. Main menu Change mode Channels Back Select

(Depending on how your radio is programmed, you may be able to press a function key to change mode.) 2 Select Yes to confirm your selection, and your radio now shows the default display for either trunked or conventional. Basic operation 49 The following examples show typical default displays for trunked and conventional modes. 16A Network 1 200-20001-20 Menu trunked mode Channel 1 Zone 2 conventional mode Menu 50 Basic operation 5 Operating in trunked mode This section explains how your radio operates on a DMR (digital), MPT (analog) or dual-mode trunked network. Your radio must have trunking functionality programmed before it can operate in DMR or MPT trunked mode. This section covers:

Checking that your network is available Changing your network Making a preset call About trunked zones and workgroups About emergency operation Dialing a PABX number Dialing a PSTN number Receiving a call Re-establishing a call Checking missed calls About status messages About trunked text messages Placing the radio in do-not-disturb mode Calls to conventional channels or conventional groups Operating in trunked mode 51 Checking that your network is available appears in the display. These are the Check that the orange LED is flashing and the network icon indications that your radio has access to a trunked network. If the network icon is flashing, your radio is attempting to access the trunked network. If this icon remains flashing, your radio may be out of the network coverage area. Changing your network Your radio may be programmed to operate in up to four completely separate trunking networks, either DMR (digital), MPT (analog) or both (dual mode). You may wish to change networks because you are out of the network coverage area, or you need to have access to another trunking network. To change your radios operating network, you may be able to either use the Main menu or dial the new network using the alphanumeric keys. Changing your radios workgroup may also change the network in which you are operating. See "Selecting a workgroup" on page 55. Using the Main menu 1 Select Menu > Change network. Main menu Change network Change mode Back Select 2 In the Change Network menu, scroll through the list of networks until the network you want appears. 3 Press Select. 52 Operating in trunked mode The radio will restart, and display a power-up message followed by the name of the new network. Dialing a new network This feature is only available for radios with alphanumeric keys. 1 Dial *700# to display the name of the current trunked network. 2 Dial *70n# to change to a new network, where n is the number of the new network (1 to 4). The radio will restart, and display a power-up message followed by the name of the new network. Making a preset call The preset calls programmed for your radio may be to other radios, to PABX extensions or to PSTN numbers. 1 Select Menu > Preset calls. Main menu Preset calls Set zone Back Select

(Depending on how your radio is programmed, you may be able to use a function key, or left selection key to select the Preset Calls menu.) 2 In the Preset Calls menu, scroll through the list of calls until the call you want appears, then press Send. While the call is being setup, you can cancel the call by pressing Clear. Operating in trunked mode 53 Dialing a preset call This feature is only available for radios with alphanumeric keys. The preset calls programmed for your radio can be dialed if you know the number associated with the preset call. 1 Dial p, where p is the number of the preset call. If your preset call number is the same as a call to another radio, then you need to dial a leading 0. For example, dial 23# to call radio 23 and dial 023#

for preset call number 23. 23 Clear Send 2 Press Send or the # or PTT key. While the call is being setup, you can cancel the call by pressing Clear. About trunked zones and workgroups Trunked zones and workgroups are used to manage the calls on the trunked system. Zones typically define geographic areas (towns, suburbs or counties), or branches of an organization. Workgroups span multiple zones, and typically define functions, work areas or job roles. When your radio belongs to a workgroup, it is said to be subscribed, and you receive all calls directed to that group of users. A groups members are dynamic, in that a group only contains radios that are currently registered on the system and subscribed to the same group. 54 Operating in trunked mode Your radio may be programmed to use different names for a zone and workgroup. For example, district or area may be used in place of zone, and role or group may be used in place of workgroup. Selecting a zone 1 Select Menu > Set zone. Main menu Set zone Set workgroup Back Select

(Depending on how your radio is programmed, you may be able to use the scroll keys, left selection key or channel selector to select a zone.) 2 In the Set Zone menu, scroll through the list of zones until the zone you want appears. 3 Press Select. 4 Check that the network icon display. appears in the Selecting a workgroup 1 Select Menu > Set workgroup. Main menu Set workgroup Go to homegroup Select Back

(Depending on how your radio is programmed, you may be able to use the scroll keys, left selection key or channel selector to select a workgroup.) 2 In the Set Workgroup menu, scroll through the list of workgroups until the workgroup you want appears. 3 Press Select. 4 Check that the network icon display. appears in the Operating in trunked mode 55 Making a call to a workgroup Different types of calls may be associated with your workgroups. These calls can be individual calls, preset calls, broadcast calls (no response permitted), or conference calls. To make a call to a workgroup:

1 Select the required zone. See "Selecting a zone"

on page 55. 2 Select the required workgroup. See "Selecting a workgroup" on page 55 3 Press the PTT key, and a call to that workgroup is made. Selecting the homegroup Your homegroup is the workgroup in which your radio usually operates. To return to your homegroup at any time, you may be able to use the main menu, or use a function key. Using the Main menu 1 Select Menu > Go to homegroup. Main menu Go to homegroup Scanning Back Select 2 Press Select, and the radio now shows your homegroup in the default display. Using a function key You may be able to use a function key to toggle between your homegroup, and the currently selected zone and workgroup. Press the function key programmed for your homegroup. The radio now shows your homegroup in the default display, along with the homegroup icon

. 56 Operating in trunked mode The homegroup icon only appears if you use a function key to select your homegroup. Scanning workgroups The My Workgroups list comprises the current workgroup, the homegroup, and other programmed groups. When scanning is active, the radio will receive activity from any subscribed groups in the My Workgroups list. To activate scanning:

1 Select Menu > Scanning. Main menu Scanning Send Back Select

(Depending on how your radio is programmed, you may be able to use a function key to select scanning.) 2 Scroll to On (or Off) and press Select. About emergency operation In an emergency you may be able to summon help by sending an emergency call. After making the call, your radio may be programmed to enter emergency mode. While emergency mode is active, your radio may cycle between receive and transmit, so that your dispatcher or the called party can hear any activity near your radio. On most networks, an emergency call takes precedence over other call types, and existing calls are cleared down so that the emergency call can proceed. To make an emergency call from your radio, you may be able to either:

make a preset emergency call, Operating in trunked mode 57 dial the emergency call using the alphanumeric keys, or use a function key programmed for emergency mode. Making a preset emergency call To make a preset emergency call from your radio, you may be able to either use a programmed function key, use the main menu, or use your quick access menu. 1 Select your preset emergency call. See "Making a preset call" on page 53. 2 Press Send. An emergency call is now sent to the emergency location that has been programmed for your radio. 58 Operating in trunked mode Dialing an emergency call This feature is only available for radios with alphanumeric keys. 1 Dial *9. 2 Press Send or the or PTT key. An emergency call is now sent to the emergency location that has been programmed for your radio. If you wish to send an emergency call to another radio, you may be able to dial *9*n then or PTT key. In this case, n is the press the radio unit number you wish to send the emergency call to and may be a two- or three-

digit number. Activating emergency mode You can activate emergency mode using a function key programmed for emergency mode. Alternatively, you may be able to activate emergency mode using a hidden switch or panic button. Once emergency mode is activated, your radio makes an emergency call to your dispatcher or some other predetermined location. The radio then enters emergency mode. While emergency mode is active, your radio may cycle between receive and transmit, so that your dispatcher can hear any activity near the radio. Cancelling emergency mode Reset the radio to normal operation at any time by turning the radio off and then on. Emergency mode may be programmed to end after a fixed period of time. In this case, there is no need to turn the radio off and then on in order to return the radio to normal operation. Operating in trunked mode 59 Dialing a PABX number This feature is only available for radios with alphanumeric keys. To dial a PABX extension:

1 Dial n, where n is the PABX extension you wish to call. 2 Press Send or the or PTT key. The call details appear in the display. While the call is being setup, you can cancel the call by pressing Clear. Dialing a PSTN number This feature is only available for radios with alphanumeric keys. To dial a PSTN number:

1 Dial 0n, where n is the PSTN number you wish to call. The numbers you dial before the 0 depend on the way your network operates. or PTT key. 2 Press Send or the The call details appear in the display. While the call is being setup, you can cancel the call by pressing Clear. Receiving a call When you receive a call, your radio displays the callers identity and responds in one of two ways, depending on the way it was programmed and the way your network operates. On-air call setup: The radio gives a ring and auto-

icon appears in matically accepts the call. The the display. 60 Operating in trunked mode Full off-air call setup (FOACSU): When a call is received, the radio rings like a telephone. To accept the call, press Answer. The radio gives a beep and the icon appears in the display. You may also be able to accept the call if you briefly press the PTT key or lift the microphone off the microphone clip. icon appears, you can proceed with the Once the call, as follows:

1 Hold the microphone about 5 cm (2 inches) from your mouth. 2 Press and hold the PTT key to transmit. 3 Speak clearly into the microphone and release the PTT key when you have finished talking. While you are transmitting, the LED glows red and appears in the display. 4 End the call by placing your microphone back onto its hook or by pressing Clear. The network may also end the call if neither you nor the other party transmits for a predetermined time or if your call time limit is exceeded. Call time limit In trunked mode, the length of your call may be limited by the network or by your radio. Your radio may be programmed to display the time remaining for your call. Re-establishing a call The last number recall, unanswered call and callback functions allow you to re-establish calls using the PTT key. Operating in trunked mode 61 Last number recall When an outgoing call has ended, the message Last call to and the called units identity may appear on the display. To make a call to that person again, briefly press the PTT key. Unanswered call When an incoming call is missed, the message Missed call and the callers identity may appear in the display. To return the call, briefly press the PTT key. Callback When an incoming call has been ended, the message Last call from and the callers identity may appear in the display. To make a call to that person, briefly press the PTT key. Checking missed calls If you have missed an incoming call, it may be stored in the call queue, so that you can return the call later. Information about the last missed call is shown in the display and the queued call icon appears. 62 Operating in trunked mode In the example below, the last call received was a status message from Car 1. This call is the first of three calls stored in the call queue. type of call queued calls identity of last unanswered options available depend on type scroll through the calls position of call in the call queue Accessing the call queue 1 Use the scroll keys to move through the calls in the call queue until the call you want appears. 2 Press Options to open the call options menu. The options available for the call depend on the type of call it is. If the call is a voice call, select Call to return the call or Delete to delete the call. If the call is a status message or a text message, then select View to read the message. Changing your call queuing setting Your radio may be programmed so that you are able to change call queuing to unanswered. Unanswered call queuing means that all status and text messages are immediately queued. Incoming voice calls are only queued if they are unanswered. If your radio has alphanumeric keys, you may be able to change your call queuing setting using the keypad. To activate call queuing:

select Menu > Radio settings > Call settings > Call queuing and choose On, press the function key programmed for Call queu-

ing, or dial *48 then press the or PTT key. Operating in trunked mode 63 The message Call queuing activated appears. To change call queuing to unanswered call queuing:

select Menu > Radio settings > Call settings > Call queuing and choose Off, press the function key programmed for Call queu-

ing, or dial #48 then press the The message Call queuing deactivated appears. or PTT key. About status messages A status message is sent to another party to indicate your current activity or location, such as en route or at lunch. If the radio receiving your message has been programmed with the same status messages, it will decode and display your message. If you receive a status message, the message is automatically queued, since a response is not expected. Selecting a status message 1 Select Menu > Send > Status. 2 In the Status menu, scroll through the list of status messages until the message you want appears. Status On site In transit Back Options Sending a status message 1 When you have chosen a message, press Options and the Send To menu opens. 64 Operating in trunked mode 2 In the Send To menu, scroll through the list of options until the choice you want appears. Send to Dispatcher Preset Back Select If your radio has alphanumeric keys, you can choose the option Dialed, then dial the number of the party you wish to call. 3 Press Send. The call details appear in the display. While the call is being setup, you can cancel the call by pressing Clear. Operating in trunked mode 65 Dialing a status message If your radio has alphanumeric keys, the status messages programmed for your radio can be dialed. To dial the message, you need to know the number associated with the status message. To dial a status message:

1 Dial *0s*n, where s is the number of the status message and n is the radio unit number you wish to send the message to. 2 Alternatively, dial *0s*p, where p is the number of a preset call. See "Dialing a preset call" on page 54 for more information. 3 Press Send or the # or PTT key. The call details appear in the display. While the call is being setup, you can cancel the call by pressing Clear. About trunked text messages Your radio may be programmed so that you can send text messages. The three options for creating text messages are selecting a preset text message, editing a draft text message, or creating a new text message. To either edit or enter a text message, your radio must have alphanumeric keys. Using the alphanumeric keys to enter text When the alphanumeric keys are used to enter a text message, they have special functions. Use the # key to select the type of text entry:

upper and lower case characters (ABC, abc), ini-

tial capitals (Abc), or numbers (123). Use the left selection key (Clear) to delete a char-

acter from the display. Use the scroll keys to move through a message. 66 Operating in trunked mode Repeated presses of these keys will give you the characters shown in the following table.

1 Key Characters

A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 Key Characters P Q R S 7 T U V 8 W X Y Z 9 space 0 In the example below, a preset text message has been selected, and is being edited. currently selected text entry option

(lower case) abc 16/100 Contact base now|

number of characters used / total number of cursor: shows current point of text Clear Options Sending a preset text message 1 Press Menu and select Send >

Text message > Preset message. Text message Preset message Edit message Back Select In the Preset Message menu, a short label representing each message is displayed. 2 Scroll through the list of preset message labels until the one you want appears. Preset message Contact Site Back Select Operating in trunked mode 67 3 Press Select, and the text message you have chosen is now displayed. Contact base now Back Edit Send 4 Press Send to send the message, or Edit to change the message. Editing a draft text message 1 Press Menu and select Send >

Text message > Edit message. In the Edit Message menu, a short label representing a message is displayed. 2 Use the scroll keys to move through the characters. Use the alphanumeric keys to add characters and the Clear key to delete them. abc On site|

7/100 Clear Options 3 When the message is complete, press Options and select Send. Creating a new text message 1 Press Menu and select Send >

Text message > New message. The last text message you sent may be displayed. 2 In the New Message menu, modify the last text message you sent, or enter the new text message using the alphanumeric keys. 3 When the message is complete, press Options and select Send. 68 Operating in trunked mode Sending a text message 1 When you have chosen or entered a message, press Options and the Text Options menu opens. Text options Send Cancel sending Back Select 2 In the Text Options menu, scroll through the list of options until the choice you want appears.

(If your radio has alphanumeric keys, you may be able to dial the number of the party you wish to call.) 3 Press Select. The call details appear in the display. While the call is being setup, you can cancel the call by pressing Clear. Placing the radio in do-not-disturb mode If you do not want calls for a while, you can place the radio in do-not-disturb mode, so that incoming calls can be ignored. You can make outgoing calls in the usual way. While do-not-disturb mode is active, incoming calls cannot be stored in the call queue. Using a function key 1 Press the function key programmed for do not disturb, to activate the do-not-disturb function. The message Do not disturb activated appears in the display. Your radio will now ignore all incoming calls. 2 To deactivate the do-not-disturb function, press the do-not-disturb function key again. Operating in trunked mode 69 The message Do not disturb deactivated appears in the display. Using the Main menu 1 Select Menu > Radio Settings >

Call Settings > Do not disturb. 2 In the Do Not Disturb menu, choose On. 3 Press Select. The message Do not disturb activated appears in the display. Your radio will now ignore all incoming calls. Calls to conventional channels or conventional groups You may be able to dial conventional channels or groups, using 101 to 110. The channels or groups called using these numbers are programmed for your radio. To call a conventional channel or group:

1 Dial the number for the channel or group you wish to call. 2 Press Send or the or PTT key. Your radio switches to the conventional channel programmed for that number. 70 Operating in trunked mode 6 Dialing calls in trunked mode If your radio has alphanumeric keys, you can make dialed calls from your radio. The numbers you dial and dialing features available depend on the way your radio is programmed and the way your network operates. Contact your radio provider for further assistance. This section covers:

MPT 1343 dialing Nokia ANN fleet calls Accessing common trunking functions Dialing calls in trunked mode 71 MPT 1343 dialing If your MPT or DMR trunked network uses the MPT 1343 dialing scheme, your radios unique number on the network consists of:

a three-digit prefix, a four-digit fleet number, and a two- or three-digit radio unit number. You may also be part of a group, with a two- or three-

digit group number. Finding your radios MPT number To find your radios full MPT number:

1 Dial *700. 2 Press the # or PTT key. The name associated with your network and your radios full MPT number appears. The number is in the form:

Prefix Radio unit number 234 300 Fleet 3078 72 Dialing calls in trunked mode MPT 1343 dialed calls The following table summarizes the way you dial calls to other radios and groups of radios and gives an example of each type of call. In the following examples, the final # may be replaced by a short press of the PTT key. Call to Radio 23 in the same fleet as you Dialing code and example Radio unit number 23 Radio 234 in the same fleet as you Radio unit number 234

Radio 23 in fleet 3078 with the same prefix as you Fleet 3078 Radio unit number 23 Radio 234 in fleet 3078 with the same prefix as you Fleet 3078 Radio unit number 234

Radio 234 in fleet 3078 with a different prefix to you (300) Prefix 300 Fleet 3078 Radio unit number 234

Group 92 in the same fleet as you Group 923 in the same fleet as you Group 92 Group 923

Dialing calls in trunked mode 73 Nokia ANN fleet calls If your trunked network uses Nokia ANN dialing, the numbers you dial depend on your fleet size. Fleets are defined as either large, small or mini. Your radios unique number on the network consists of:

a lead number 7, 8 or 9, depending on the fleet size, a zero-, one-, two- or three-digit prefix, a one- or two-digit fleet number, and a two- or three-digit radio unit number. See your radio provider or network administrator for Nokia ANN call details. Finding your radios MPT number To find your radios full MPT number:

1 Dial *700. 2 Press the # or PTT key. The name associated with your network and your radios full MPT number appears. The number is in the form:

Lead 7 Radio unit number 209 Prefix 34 Fleet 2 74 Dialing calls in trunked mode Nokia ANN dialed calls The following table summarizes the way you dial calls to other radios and gives an example of each type of call. In the following examples, the final # may be replaced by a short press of the PTT key. Call to Radio 23 in the same fleet as you Group 923 in the same fleet as you Large fleet:

Call to radio 234 in fleet 1 with the same prefix as you Call to radio 235 in fleet 2 with a different prefix to you (32) Small fleet:

Call to radio 23 in fleet 51 with the same prefix as you Call to radio 23 in fleet 52 with a different prefix to you (126) Mini fleet:

Call to radio 23 in fleet 80 with the same prefix as you Call to radio 23 in fleet 81 with a different prefix to you (3) Dialing code and example Radio unit number 23

Group 923

Lead 7 Fleet 1 Radio unit number 234

Lead 7 Prefix 32 Fleet 2 Radio unit number 235

Lead 7 Fleet 51 Radio unit number 23

Lead 7 Prefix 126 Fleet 52 Radio unit number 23

Lead 7, 8 or 9 Fleet 80 Radio unit number 23

Lead 7, 8 or 9 Prefix 3 Fleet 81 Radio unit number 23

Dialing calls in trunked mode 75 Accessing common trunking functions The following tables explain how you can access special MPT or DMR trunking functions using the and # keys. The availability of these functions is dependant on the way your radio is programmed and the way your network operates. In the following examples, the final # may be replaced by a short press of the PTT key.

*... # functions Dialing code

Functions Example

*0*234#

#0*234#

*015*23#

Accept an incoming FOACSU call Clear call or displayed item, or decline an incoming FOACSU call Request base dispatcher to call you back Cancel request Request another dispatcher to call you back Cancel request Status call to radio n (s = status 0 to 31, MPT, or 0 to 127, DMR) Status call to dispatcher Conference call to group g Broadcast call to group g Non-prescribed data c Divert own calls to radio n Cancel divert Divert own calls to PSTN n Cancel divert Divert 3rd party calls n to m Cancel divert of 3rd party calls Queue incoming calls Cancel queue

*015#

*1*92#

*11*92#

*31*23#

*41*23#

*44*23*21#

#44*23#

*41*03456798#

*0#

#0#

*0*n#

#0*n#

*0s*n#

*0s#

*1*g#

*11*g#

*31*n#

*41*n#

#41#

*41*0n#

#41#

*44*n*m#

#44*n#

*48#

#48#

76 Dialing calls in trunked mode

*... # functions Dialing code

*49#

#49#

*491#

#491#

*492#

#492#

*50*n#

#50#

*700#

*70n#

*8*n#

*8*1*g#

*9*n#

*9*1*g#

**n#

Functions Example Do not disturb Cancel do not disturb Do not disturb voice calls only Cancel do not disturb voice calls only Do not disturb data calls only Cancel do not disturb data calls only Select channel n (site-select diagnostic function, enabled during programming) Resume normal channel hunting (site-select diagnostic function, enabled during programming) Display your MPT number and current network Change to network n (1 to 4) Priority call to radio n Priority conference call to group g Emergency call to radio n Emergency conference call to group g *9*1*92#

Abbreviated dialed codes (1-49)

(MPT only)

*702#

*8*23#

*8*1*923#

*9*23#

**3#

Dialing calls in trunked mode 77 7 Operating in conventional mode This section explains how to operate your radio on a conventional network. This includes how to make and receive different types of calls, use your radio in different repeater areas, and scan a group of channels for activity. This section covers:

Selecting a zone Selecting a channel Selecting a group Checking that a channel is clear Making a call Making a call using the address book Making a local call Connecting to a telephone network Making an emergency call Sending a status message Transmitting at low power Ending active calls Activating the repeater before a call Communicating directly with other radios Receiving a call Hearing faint and noisy signals Using the radio in different repeater areas Scanning a group of channels 78 Operating in conventional mode Selecting a zone A zone is a collection of channels and groups. When you select a zone, only the channels and groups assigned to that zone are available. 1 Select Menu > Zones. Main menu Zones Address book Back Select

(Depending on how your radio is programmed, you may be able to use the scroll keys or left selection key to select the Zones menu.) 2 In the Zones menu, scroll through the list of zones until the one you want appears. Zones Zone 2 Zone 3 Back Select 3 Press Select, and the zone indication appears either below the channel information, beside the RSSI icon, or in both positions. Channel 12 Zone 11 Zones Menu Selecting a channel 1 Select Menu > Channels. Main menu Channels Zones Back Select

(Depending on how your radio is programmed, you may be able to use the scroll keys or left selection key to select the Channels menu.) Operating in conventional mode 79 2 In the Channels menu, scroll through the list of channels until the channel you want appears. Channels Channel 9 Scan 1 Back Select 3 Press Select, and the programmed channel is now shown in the display. Using the channel selector For channels 1 to 16, rotate the channel selector to the channel you want. For all other channels, use the Main menu to select a channel. Dialing a channel This feature is only available for radios with alphanumeric keys. 1 Dial the number associated with the channel using the alphanumeric keys. 9 Clear Select 2 Press Select, and the programmed channel is now shown in the display. Selecting a group A group is a collection of channels that are grouped together for either scanning or voting. In the Channels menu, the group is shown as being a single channel item, e.g. Scan1. The sections "Using the radio in different repeater areas" on page 94 and "Scanning a group of channels" on page 95 explain how your radio operates once a scan group or voting group has been selected. 80 Operating in conventional mode Using the Main menu 1 Select Menu > Channels. Main menu Channels Zones Back Select

(Depending on how your radio is programmed, you may be able to use a function key, the scroll keys or left selection key to select a group.) 2 In the Channels menu, scroll through the list of channels and groups until the group you want appears. Channels Channel 9 Scan 1 Back Select 3 Press Select, and the programmed group is now shown in the display. The scanning icon appears in the display. Scan 1 Channels Menu Dialing a group This feature is only available for radios with alphanumeric keys. To dial the group number from the default display:

1 Dial the number associated with the group using the alphanumeric keys. 12 Clear Select 2 Press Select, and the programmed group is now shown in the display. The scanning icon appears in the display. Operating in conventional mode 81 Checking that a channel is clear Monitor allows you to override some or all of the radios mutes, and hear if there is any traffic on a channel. For analog channels, this is so that you can check that the channel is clear before you make a call. Turning monitor on and off 1 Press Menu and select Radio settings >

Functions > Monitor.

(Depending on how your radio is programmed, you may be able to press a function key to toggle monitor on and off.) 2 Scroll to On (or Off) and press Select. While monitor is on, the LED slowly flashes green and the monitor icon appears in the display. Your radio may be programmed so that monitor turns off automatically after a short time. Making a call 1 Select the required channel or scan group. You may need to select the zone you want first, then select the channel or group from that zone. 2 Check that the channel is clear. If the LED is glowing green, the channel is busy and you may not be able to transmit. 3 Once the channel is clear (the green LED is off), lift the microphone off the microphone clip. 4 Hold the microphone about 5 cm (2 inches) from your mouth. 5 Press and hold the PTT key to transmit. 6 Speak clearly into the microphone and release the PTT key when you have finished talking. 82 Operating in conventional mode While you are transmitting, the LED glows red and the transmit icon appears in the display. Limiting call time Your radio may limit the amount of time you can talk

(transmit) continuously. This is known as the transmit timer or time-out timer and allows other radio users to make calls on that channel. The message Transmit Timeout Imminent appears in the display. If the transmit timer has timed out, you must release the PTT before you can transmit again. Your radio may be unable to transmit for a short time after the transmit timer has expired. Making a call using the address book The Address Book menu has a programmed list of calls, which can be made from any channel or zone. Address-book calls may also be used to send status information, such as at lunch or on site, or to change to a channel or group. Using the Main menu 1 Select Menu > Address book. Main menu Address book Local calls Back Select

(Depending on how your radio is programmed, you may be able to use the scroll keys, left selection key or a function key to select the Address Book menu.) 2 In the Address Book menu, scroll through the list of calls until the call you want appears. 3 Press Send. Operating in conventional mode 83 The call details appear in the display, the LED glows red, and appears in the display. Making a local call Each channel on your radio may have one or more local calls programmed. Using the Main menu 1 Select the required channel. 2 Select Menu > Local calls. Main menu Local calls Set status Back Select 3 In the Local Calls menu, scroll through the list of local calls until the call you want appears. 4 Press Send. The call details appear in the display, the LED glows red, and appears in the display. Using the Quick Access menu 1 Select the required channel. 2 Press one of the scroll keys or the left selection key to open the Local Calls menu. 3 Scroll through the list of local calls until the call you want appears. 4 Press Send. The call details appear in the display, the LED glows red, and appears in the display. Dialing a local call This feature is only available for radios with alphanumeric keys. To make a local call to another radio or group of radios:

84 Operating in conventional mode 1 Select the required channel. 2 Select Menu > Dial radio call. Alternatively, your radio may be programmed so a local call can be dialed directly from the default display. In this case, you can start dialing the call without selecting the menu option. A series of X and S characters may appear, prompting you to dial over them. 3 Dial the number using the alphanumeric keys. Your radio may be programmed so you can dial group tones using the to fill one X. Dial subsequent X characters in the current burst. keys. Dial to fill the current X and all and 4 Press Send (if the Send option appears). The call details appear in the display, the LED glows red, and When the called party receives your call, the message Ack received may appear in the display. appears in the display. Connecting to a telephone network You may be able to use your radio to connect to a telephone network. This type of call is known as a DTMF patch call. To make a DTMF patch call, you may be able to either:

use a programmed function key, use the Main menu to dial the call, make a local call (see "Making a local call" on page 84), or use your address book (see "Making a call using the address book" on page 83). Operating in conventional mode 85 Using a function key Depending on how DTMF patch calls are programmed, some or the following steps may not be necessary. 1 Select the required channel. 2 Press the function key programmed for DTMF patch call. Your radio may send tones to capture the line. 3 Press Send, or press the function key a second time, to send the preset number. You may hear telephone dialing and ringing tones. 4 Proceed with your call. 5 Press End, or give a long press on the function key, to end the call. Your radio may send tones to release the line. Using the Main menu This feature is only available for radios with alphanumeric keys. To dial a DTMF patch call by using the Main menu:

Depending on how DTMF patch calls are programmed, some or the following steps may not be necessary. 1 Select the required channel. 2 Select Menu > Dial patch call. 3 Dial the required number using the alphanumeric keys. 4 Press Send. Your radio may send tones to capture the line. 5 Press Send to send the number dialed in step 3. You may hear telephone dialing and ringing tones. 6 Proceed with your call. 86 Operating in conventional mode 7 Once the call has finished, press End. Your radio may send tones to release the line. Making an emergency call You may be able to activate emergency mode by using a programmed function key. 1 Press the function key programmed for Emergency Mode and an emergency call is sent to your dispatcher, or some other predetermined location. While emergency mode is active, your radio may cycle between receive and transmit, so that your dispatcher can hear any activity near the radio. Alternatively, your radio may appear to turn off but will actually remain in emergency mode. 2 Reset the radio to normal operation at any time by turning the radio off and then on. Emergency mode may be programmed to end after a fixed period of time. In this case, there is no need to turn the radio off and then on in order to return the radio to normal operation. Sending a status message Your radio may be able to maintain a record of your current status. This status may be sent with outgoing calls programmed to contain status information. If the radio receiving your message has been programmed with the same status messages, it will decode and display your message. The message indicates your current activity or location, such as en route or at lunch. To change you current status:

Operating in conventional mode 87 1 Select Menu > Set status. Main menu Set status Dial radio call Back Select 2 In the Set Status menu, scroll through the list of status messages until the message you want appears. 3 Press Select. The message Status updated appears in the display. Transmitting at low power If you want to transmit at low power, you can override your radios programmed power settings. To change to low-power transmit on your current channel, you may be able to either use a programmed function key, or use the Main menu. Using the Main menu 1 Select Menu > Radio settings >

Functions > Low power Tx. Functions Low power tx Monitor Back Select 2 In the Low Power Transmit menu, choose On. 3 Press Select. The message Low power tx activated appears briefly, and the low-power transmit icon appears in the display. Using a function key 1 Press the function key programmed for low-power transmit to transmit at low power on your current channel. 88 Operating in conventional mode The message Low power tx activated appears appears briefly, and the low-power transmit icon in the display. 2 Press the low-power transmit function key again to turn low-power transmit off, and the message Low power tx deactivated appears in the display. Ending active calls You may have a function key programmed to either end the current call, or end the current call and all other active calls in your group. This can be done either by:

using the function key programmed for reset mon-

itor to end your current call, using the function key programmed for call clear-

down to end your current call and all other calls in your group, or using the function key programmed for both reset monitor and call cleardown. Using a function key to end your current call Press the function key programmed for reset mon-

itor. The radios monitor is turned off, ending your current call. The LED stops flashing green, and the monitor icon disappears from the display. Using a function key to end all active calls Press the function key programmed for call clear-

down and monitor is turned off for all radios in your radio group. The LED stops flashing green, and the monitor icon disappears from the display. Operating in conventional mode 89 Using the function key programmed for reset monitor / call cleardown to end active calls The function key programmed for reset monitor may be programmed so that a short key press ends your current call, and a long key press ends all active calls in your group. Activating the repeater before a call A repeater-access tone is sent to activate the repeater before a call is made, so that the start of the call is not lost. To send a repeater-access tone, you may be able to either use the PTT key, or use a programmed function key. Using the PTT key 1 Press the PTT key and the repeater-access tone for the current channel is sent. The call details appear in the display, the LED glows red, and also hear signaling tones. appears in the display. You may 2 Press and hold the PTT and proceed with your call. Using a function key 1 Press the function key programmed for sending a repeater-access tone, and the repeater-access tone for the current channel is sent. The call details appear in the display, the LED glows red, and also hear signaling tones. appears in the display. You may 2 Press and hold the PTT and proceed with your call. 90 Operating in conventional mode Communicating directly with other radios You can bypass the radio repeater and communicate directly with another radio. This feature is known as repeater talkaround. You can do this, for example, when you are out of range of the repeater, or if the repeater is busy or stops working. While repeater talkaround is active, all transmissions are made on the receive frequency of the channel you are on. To activate repeater talkaround, you may be able to either use a programmed function key, or use the Main menu. Using the Main menu 1 Select the required channel. 2 Select Menu > Radio settings > Functions > Talkaround. 3 In the Talkaround menu, choose On. 4 Press Select. The message Talkaround activated appears briefly, and the repeater talkaround icon appears in the display. 5 Proceed with your call. 6 To turn repeater talkaround off, either change the channel, or choose Off in the Talkaround menu. Using a function key 1 Select the required channel. 2 Press the programmed function key to turn repeater talkaround on. The message Talkaround activated appears briefly, and the repeater talkaround icon appears in the display. 3 Proceed with your call. 4 To turn repeater talkaround off, either change the channel, or press the function key again. Operating in conventional mode 91 Receiving a call When there is valid activity on your radios currently selected channel or group, the radio then unmutes and you can hear the call. If the incoming call contains special signaling that matches the signaling programmed for your radio, the LED flashes green and your radio may give a ringing tone. Receiving a text message Your radio may be able to display received text messages in conventional mode. If programmed, the queuing icon queue) is always shown in the default display while in conventional mode.

(empty queue) or

(message in Viewing a text message When a text message is received, the radio sounds two short high-pitched beeps. If the radio is currently showing the default display, the message appears immediately. To view a message that does not appear immediately:

1 Navigate to the default display. 2 Press Queue. To delete the message, press Delete. The message Queue empty appears in the display. If you want to leave the message in the queue, press Back. The conventional call queue only retains one message. If a new message is received while there is an old message left in the queue, the old message will be replaced. 92 Operating in conventional mode Hearing faint and noisy signals Your radios squelch allows the radio to unmute only when the strength of the incoming signal is above a predetermined threshold. This means that only signals of reasonable intelligibility are made audible. To make faint and noisy signals audible, use the squelch override function to unmute the radio. To activate squelch override, you may be able to either use the Main menu, or a programmed function key. Using the Main menu 1 Select Menu > Radio Settings >

Functions > Squelch oride. Functions Squelch o'ride VOX Back Select 2 In the Squelch Override menu, choose On. 3 Press Select. The message Squelch override activated appears in the display. While squelch override is on, the LED flashes green, and the squelch override icon the display. appears in Using a function key 1 Press the function key programmed for squelch override to unmute the radio. The message Squelch override activated appears in the display. While squelch override is on, the LED flashes green, and the squelch override icon the display. appears in 2 To turn squelch override off, press the squelch override function key again. Operating in conventional mode 93 Using the function key programmed for monitor The function key programmed for monitor may be programmed so that a short key press turns monitor on, and a long key press turns squelch override on. To activate squelch override:

Press and hold the function key programmed for monitor to override the radios squelch. The message Squelch override activated appears in the display. While squelch override is on, the LED flashes green, and the squelch override icon the display. Squelch override remains on until there is a further long key press. appears in Using the radio in different repeater areas Your radio may have a group of channels programmed as a voting group. The channels in the voting group all carry the same traffic, but from different repeaters. As your radio moves in and out of different repeater coverage areas, the best communication channel is automatically selected for you to use, until a better communications channel is selected. This channel is known as the home channel, and will be the channel you make and receive calls on. While voting is active, the scanning icon appears in the display. The section "Selecting a group" on page 80 explains how to select a group. A group can be either a voting or a scanning group. 94 Operating in conventional mode Suspending a channel from a voting group You may be able to use the function key programmed for nuisance delete to temporarily delete one of the channels from the voting group. When that voting group is next selected, or after the radio has been turned off and then on, the deleted channel is again part of the voting group. Alternatively, the function key programmed for voting may be programmed so that a short key press turns on voting, and a long key press activates nuisance delete. Press and hold the function key programmed for voting to remove the current channel from the vot-

ing group. If the operation has been successful, the message Channel deleted from group appears in the display. Scanning a group of channels appears in the display. When The scan function is used to monitor a programmed group of channels, looking for activity. While the radio is scanning for activity, the orange LED glows and the scanning icon activity is detected on a channel in the scan group, the radio stops on that channel. The orange LED begins flashing, the radio unmutes and you can hear the call. Scanning resumes once the channel is no longer busy. The section "Selecting a group" on page 80 explains how to activate scanning. Operating in conventional mode 95 Standard and background scanning The two types of scanning that may be available on your radio are standard scanning, and background scanning. Background scan can only be activated by using a function key programmed for background scan. It differs from standard scanning in that the channel that was selected when background scan was activated is also included as a scan-group member. Making a call while scanning If you wish to make a call while your radio is scanning:

1 Lift the microphone off the microphone clip. 2 Press the PTT key to transmit. If the orange LED is flashing, or background scan is active, your radio will now call the currently selected channel. 3 If standard scan is active and there has been no recent activity on the channel (the orange LED is glowing rather than flashing), then the channel that is called depends on the way your radio has been programmed. The possible options are:

your radio calls a predetermined channel e.g. your dispatcher, your radio calls the channel where activity was last detected, or your radio calls the last free channel. 4 When the called party responds, proceed with your conversation. Changing the background scan group assigned to a function key You can change the background scan group assigned to the function key programmed for group scanning or for scanning/nuisance delete. 96 Operating in conventional mode 1 Select Menu > Advanced > Set scan key. Advanced Set scan key Program groups Back Select 2 In the Set Scan Key menu, scroll through the list of background scan groups until the group you want appears. 3 Press Select. The message Scan key scans new group appears in the display. The next time you activate background scan, the new group will be your background scan group. Suspending a channel from a scanning group If a member channel of a scan group is busy for a long time and you do not wish to hear the conversation, you may be able to use the function key programmed for nuisance delete to temporarily delete it from the scan group. When the scan group is next selected, or after the radio has been turned off and then on, the deleted channel is again part of the scan group. Alternatively, the function key programmed for scanning may be programmed so that a short key press turns on scanning, and a long key press activates nuisance delete. Press and hold the function key programmed for scanning to remove the current channel from the scanning group. If the operation has been successful, the message Channel deleted from group appears in the display. Operating in conventional mode 97 Adding or deleting member channels of a group Your radio may be programmed so you can add or delete channels in a voting or scanning group. Changes made are permanent, and will remain after restarting the radio. 1 Select the group. See "Selecting a group" on page 80. 2 Press Edit. If there is no edit option for the left selection key, the group cannot be changed. Alternatively, you may be able to edit groups by selecting Menu > Advanced > Program groups, then select the group you wish to edit. 3 In the Edit Group menu, choose Add channel or Delete channel. 4 Press Select. 5 Press the scroll keys to select the channel that you want to add or delete. 6 Press OK. If successful, the message Channel added or Channel deleted appears. To check the new group details, press Back and select the Group members menu option. Changing a groups transmit channel You may be able to change the transmit channel of a standard scanning group. The transmit channel is identified by the 1 Select the group. See "Selecting a group" on icon. page 80. 2 Press Edit. If there is no edit option for the left selection key, the group cannot be changed. 98 Operating in conventional mode Alternatively, you may be able to edit groups by selecting Menu > Advanced > Program groups, then select the group you wish to edit. 3 In the Edit Group menu, choose Change tx chan. 4 Press Select. 5 Press the scroll keys to select the new transmit channel. 6 Press OK. If successful, the message Tx channel changed appears. To check the new group details, press Back and select the Group members menu option. The new transmit channel has the icon next to it. Changing a groups first or second priority channel You may be able to change the priority channels of a scanning group. Priority channels are scanned more frequently than other channels in the group. If valid activity is found on another channel, the radio continues to scan the priority channel or channels at regular intervals. The first priority channel is identified by the identified by the 1 Select the group. See "Selecting a group" on icon, and the second priority channel is icon. page 80. 2 Press Edit. If there is no edit option for the left selection key, the group cannot be changed. Alternatively, you may be able to edit groups by selecting Menu > Advanced > Program groups, then select the group you wish to edit. 3 In the Edit Group menu, choose Change P1 or Change P2. 4 Press Select. Operating in conventional mode 99 5 Press the scroll keys to select the new priority channel. 6 Press OK. If successful, the message Priority 1 channel changed or Priority 2 channel changed appears. To check the new group details, press Back and select the Group members menu option. The new priority channel has the icon next to it. or Icon and messages that may appear when changing group details The following icons may appear when viewing group membership details, adding or deleting channels from a group, or changing a groups transmit or priority channels. Meaning This channel is used to transmit on when there has been no recent activity. You cannot delete this channel (it will not appear under Delete channel). This channel is the groups first priority channel. You cannot delete this channel (it will not appear under Delete channel). This channel is the groups second priority channel. You cannot delete this channel (it will not appear under Delete channel). There is more than one instance of this channel in the group (the channel will be scanned more often). If you delete this channel, the radio will attempt to delete all instances of the channel. Icon 100 Operating in conventional mode The following messages may appear when using nuisance delete to temporarily delete a channel from a group, when adding or deleting channels from a group, or changing a groups transmit or priority channels. Message Scanning not on No channel captured Not enough channels in group Cannot delete channel Cannot delete priority chan Only two channels in group No items in list Meaning You cannot use nuisance delete to temporarily delete a channel from a group, as there is no group currently selected. You cannot use nuisance delete to temporarily delete a channel from the group, as there is no channel currently captured (the orange LED is glowing and not flashing). You cannot use nuisance delete to temporarily delete the channel from the group, as the captured channel is the last remaining group member. You cannot use nuisance delete to temporarily delete the channel from the group. The captured channel may be the selected channel in a background scan group. You cannot use nuisance delete to temporarily delete the channel from the group, as the captured channel is a priority channel. You cannot delete a channel from the group, as there would be only one group member left. The action you are attempting is not allowed. Either:

the group does not have a preset transmit channel or priority channels programmed, or you have added all the channels in the zone to the current group. Group full You cannot add any more channels to the group, as the maximum number of members (50) has been reached. Operating in conventional mode 101 8 Loneworker monitoring Loneworker monitoring is a safety feature for people who work alone. Loneworker monitoring may be programmed to be on or off at all times, or can be switched on and off by the user using a programmed function key or the menu. A loneworker alarm is activated if for a predetermined period of time:

the radio has been tilted by more than 60 degrees

(man down) the radio has not moved there has been no user activity Your radio may be programmed to respond to a combination of these events. When the predetermined time has expired, an audible warning is given and you have a predetermined time to respond to the loneworker situation. If you are unable to respond, the radio either enters emergency mode or (in trunked mode) sends a status update to a predetermined person or talkgroup. Activating loneworker monitoring 1 Select Menu > Radio Settings > Extra features >

Loneworker. (Depending on how your radio is programmed, you may be able to press a function key to turn loneworker monitoring on and off.) Extra features Loneworker Back Select 2 In the Loneworker menu, choose On. 102 Loneworker monitoring A vertical scroll bar on the right-hand side of the display indicates the remaining activity timeout. Channel 12 Menu remaining activity timeout Responding to a loneworker alarm If you hear a beep to indicate that the radio is expecting a response from you to acknowledge that you are safe. The message Loneworker awaiting and a horizontal scroll bar appear indicating the remaining time until an emergency action is triggered. Loneworker awaiting Press any key If using the man down feature, restore the radio to an upright position. Otherwise the radio will activate emergency mode or

(in trunked mode) send a status update. Delaying the emergency action

(conventional mode only) In conventional mode, an additional emergency entry delay may be programmed which allows you to press a scroll key within a programmed time (usually 10 seconds) after the response time expires to delay the emergency action. Channel 12 Menu emergency entry delay timeout Loneworker monitoring 103 You now have the opportunity to turn the radio off and one to cancel the loneworker alarm. The emergency action can be delayed only once. 104 Loneworker monitoring 9 Customizing radio settings Your radios audible indicators and display settings can be changed in the Alert Settings menu and the Display Settings menu. These features are common to radios operating in either trunked or conventional mode. This section covers:

Changing the volume of all audible indicators Changing the volume of keypress tones Changing to quiet operation Changing to silent operation Turning on backlighting Changing the volume of all audible indicators You can set the volume of all the audible indicators to either high or low. Audible tones include incoming call tones, warning tones and confirmation tones. To change the volume of your radios audible tones:

1 Select Menu > Radio settings >

Alert settings > Indicator level. Alert settings Indicator level Keypress tones Back Select

(Depending on how your radio is programmed, you may be able to press a function key to change the level of indicators.) 2 Scroll to High (or Low) and press Select. Customizing radio settings 105 Changing the volume of keypress tones Whenever you press the radio keys, the keypress tones give you an audible indication as to whether or not your action is allowed. A short, medium-pitched beep indicates that an action is allowed. A long, low-

pitched beep indicates that the action is not allowed. To change the volume of your radios keypress tones:

1 Select Menu > Radio settings >

Alert settings > Keypress tones. Alert settings Keypress tones Quiet operation Back Select 2 Scroll to either Off, Low or High and press Select. Changing to quiet operation When quiet operation is on, keypress tones and confirmation tones are turned off. Incoming call tones, signalling tones and warning tones all remain audible. To turn quiet operation on or off:

1 Select Menu > Radio settings >

Alert settings > Quiet operation. Alert settings Quiet operation Silent operation Select Back

(Depending on how your radio is programmed, you may be able to press a function key to toggle monitor on and off.) 2 Scroll to On (or Off) and press Select. 106 Customizing radio settings Changing to silent operation When silent operation is on, all the radios audible tones are turned off, and only channel traffic can be heard. To turn silent operation on or off:

1 Select Menu > Radio settings >

Alert settings > Silent operation. Alert settings Silent operation External alert Back Select 2 In the Silent Operation menu, scroll to either On or Off and press Select. While silent operation in on, the the display. icon appears in Turning on backlighting Whenever a key is pressed or a call is received, the keypad and display light up automatically. Backlighting only remains on for a few seconds, unless there is further radio activity. When backlighting is turned on, it remains on until the setting is changed to Off, regardless of radio activity. To turn backlighting on or off:

1 Select Menu > Radio settings >

Display settings > Backlighting. Display settings Backlighting Contrast adjust Back Select

(Depending on how your radio is programmed, you may be able to press a function key to toggle backlighting on and off.) 2 Scroll to either On or Off and press Select. Customizing radio settings 107 Turning backlighting on momentarily You may be able to use a programmed function key to turn backlighting on momentarily. Press the assigned function key to turn backlight-

ing on. Backlighting remains on for a few seconds, and then turns off. Alternatively, the function key may be programmed so that:

a short key press turns backlighting on momen-

tarily, and a long key press turns backlighting on, and it remains on until there is a further long key press. 1 108 Customizing radio settings 10 Charging and caring for batteries This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life. This section covers:

About the chargers Before using the charger Charging the battery Maintaining battery life and performance Storing batteries Disposing of batteries Charging and caring for batteries 109 About the chargers Unless otherwise indicated, the charging advice and instructions in this chapter apply to all chargers. There are three types of charger available for your Tait radio battery:

Desktop charger: Small enough to fit on a desk, it charges one bat-

tery at a time. Multicharger:

Charges up to six batteries. It can be mounted on a desk, on a wall, or in an equipment rack. Warning The multi-charger must be connected to an earthed mains socket-outlet. Vehicle charger: Charges one battery at a time while installed in a vehicle. Before using the charger Handle the battery safely Warning Handle the battery safely. Failure to observe the following handling recommendations could result in personal injury and/or equipment damage. Before using a Li-ion battery, please read the Li-ion Battery Safety Information (MPC-00006-xx) 110 Charging and caring for batteries included with your battery, and follow the instruc-

tions it provides. Incorrect use of a Li-ion battery can cause explosion or fire. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-

circuiting the battery contacts can heat up the con-

ductive material. Attaching of labels Warning Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed the battery may explode, causing personal injury and/ or damage to property. If the vent on the radio is obstructed, audio quality and/or key function may deteriorate and radio seals may be damaged. For detailed information about attaching labels safely, see "Attaching labels to the radio or battery" on page 25. Charging temperatures Notice Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (service life) of the battery. To achieve the best results when charging your battery:

Before you begin to charge your battery, make sure that the battery temperature is close to the room temperature in which the battery is to be charged. Charging and caring for batteries 111 If possible, charge the battery in temperatures between 50 F and 77 F (between 10 C and 25 C). This temperature range is the opti-

mal charging range. Charging only starts when the battery is between 32 F to 104 F (0 C to 40 C). 77 F 25 C 50 F 10 C Temperature indications When the battery temperature is outside the normal charging range, the orange LED on the charger is lit. Charging will start or resume once the temperature is within normal limits, and no action is required by you. Leaving the battery on charge You can leave a battery/radio in the charger once charging is complete. Leaving a battery in the charger will not overcharge or damage it. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. Vehicle charger only It is safe to switch off the ignition while there is still a battery in the charger. However, if the vehicle will not be used again for some time, check whether charging will continue while the ignition is off, and consider what effect this might have on the vehicle battery. To check, place the battery in the charger, and switch off the vehicle ignition:

If no charger LED stays lit, the charger will resume charging only when the ignition is switched on again. Minimal charger standby power will be drawn from the vehicle battery until then. If a charger LED stays lit, the charger will continue to charge the radio battery even while the ignition 112 Charging and caring for batteries is off, and will continue to draw power from the vehicle battery. Once the battery is charged, the charger draws minimal current and has little effect on a healthy vehicle battery. Receiving calls while charging Applies to desktop charger and multicharger only. Notice For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded. If you do remove the radio from the charger to answer a call, the call will not be disrupted. Removing the radio from the charger to make or receive a call ends the charging process. Charging safely recommences when the radio is reinserted into the charger. If a radio was turned on while being charged, the battery indicator may not be accurate when the radio is initially removed from the charger. After a few seconds, the battery indicator is updated to display the amount of charge available in the battery. Low battery warning Notice Do not allow a radio battery to fully discharge every time you use it, or you will shorten the service life of the battery. When the battery is low, your radio warns you in the following ways:

The battery icon empty. on the radio display looks The status LED on the radio slowly flashes red. A high-pitched beep sounds. Charging and caring for batteries 113 You should recharge or replace the battery as soon as possible. When the battery is completely empty, the message Battery is flat appears on the display. The radio emits a long, low-pitched beep and then stops working. Turn off the radio immediately. Charging the battery Fully charge a battery before using it for the first time. This will take up to 2.5 hours. The red LED stays lit while the battery charges. To charge the battery:

1 Desktop charger: Connect the charger to the correct Tait power adaptor. Multicharger and vehicle charger: Power on the charger. Initially, all three LEDs are lit for two seconds. 2 Place just a battery in the charger, or a radio with a battery attached (desktop charger or multicharger only). There is no need to remove a belt clip, antenna, or any accessory that is attached to the accessory connector. The red LED lights up, and stays lit while the battery charges. For a battery that is almost completely discharged, allow two hours. When charging is complete, the green LED stays lit. 114 Charging and caring for batteries LED behavior If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows:

LED briefly steady steady steady Meaning The charger has been connected to a power supply. The battery is charging. Charging complete. Remove the battery, or leave it in the charger. The battery temperature is outside the normal charging range. Charging will start or resume once the temperature is within normal limits. No action is required. There is a fault. Contact your local regional Tait office. all off There is a fault. Contact your local regional Tait office. If the charger does not behave as expected:

Make sure the radio or battery is seated properly in the charger. Check that the charger is properly plugged in. Check that the battery and charger contacts are clean. To clean, wipe the contacts with a dry lint-

free cloth to remove any dirt, oil or grease. Removing the battery from the charger Desktop charger and multicharger: Lift the bat-

tery/radio out of the charger. Vehicle charger: Pull the release bar up, and then lift out the battery. Charging and caring for batteries 115 You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. Maintaining battery life and performance With proper care and maintenance you will maintain the performance and life of the battery. It is recommended that you:

Use only Tait batteries and chargers. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the service life of the battery. Very high: above 140 F (60 C) Very low: less than 22 F (30 C) Charge the battery at a room temperature of between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Store batteries properly when not in use. See "Storing batteries" on page 117. Cleaning the contacts of the battery Notice Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. 116 Charging and caring for batteries Storing batteries When not in use for a month or more, batteries should be stored correctly to prolong their life. Remove the battery from the radio before storage. Fully charge the battery if storing for less than one month. Charge the battery to about 30% if storing for lon-

ger than one month. Store the battery in a cool dry place. Using batteries after storage Batteries that have been stored for any length of time must be charged before being used. See "Charging the battery" on page 114. Disposing of batteries Run the battery flat before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner. Please contact your radio provider for information on recycling programs in your area. See "Environmental responsibilities" on page 8 for more information. Charging and caring for batteries 117 11 Troubleshooting This section describes troubleshooting procedures, and basic maintenance. This section covers:

About troubleshooting When your radio wont turn on Identifying the radios audible tones Checking the version of your radio General care Cleaning the contacts of the battery Cleaning the radio 118 Troubleshooting About troubleshooting If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. When your radio wont turn on If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio. Check the following:

Is the battery firmly attached to the radio?

Is the battery sufficiently charged?

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate properly, contact your radio provider for further assistance. Identifying the radios audible tones The radios audible tones can help you identify a potential problem:

Audible tone Meaning One short, high-pitched beep The radio has been made inoperable

(stunned or inhibited) by your service provider. Two short beeps The radio has been made operable

(revived or uninhibited) by your service provider. Two low-

pitched beeps The radios temperature is high. (The radio will continue to operate.) Troubleshooting 119 Audible tone Meaning Two high-

pitched beeps The radios temperature is in the very high range; all calls will now be at low power. If the radios temperature rises above this range, calls will be inhibited. Turn off the radio and allow it to cool down. Continuous low-pitched tone Radio system error: a system error has occurred and the radio may be inoperable. Contact your radio provider. Checking the version of your radio Your radio provider may ask you for the hardware and firmware version of your radio, for troubleshooting purposes. Using the Main menu 1 Press Menu and select Radio info > Version info. 2 Scroll to the version information you want to view and press Select. Using the PTT key Hold down the PTT key and turn on the radio. The firmware and hardware versions, and your radios frequency band is briefly displayed. General care Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. 120 Troubleshooting Notice To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleum-

based products. For general battery care, see "Maintaining battery life and performance". Cleaning the contacts of the battery Notice Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. Cleaning the radio If you need to clean the radio case, use a cloth dampened with clean water. Troubleshooting 121 Directive 1999/5/CE Declaration of Conformity Italiano Nederlands it Con la presente Tait Limited dichiara che questo TPDB1A & TPDH5A conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Vedi anche: www.taitradio.com/eudoc/

nl Hierbij verklaart Tait Limited dat het toestel TPDB1A & TPDH5A in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/

EG. Zie ook: www.taitradio.com/eudoc/

pt Tait Limited declara que este TPDB1A &

TPDH5A est conforme com os requisitos essenciais e outras provises da Directiva 1999/5/CE. Veja tambm: www.taitradio.com/eudoc/

sv Hrmed intygar Tait Limited att denna TPDB1A & TPDH5A str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Se ven: www.taitradio.com/eudoc/

Portugus Svensk Dansk English Deutsch da Undertegnede Tait Limited erklrer herved, at flgende udstyr TPDB1A &

TPDH5A overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Se endvidere: www.taitradio.com/eudoc/

de Hiermit erklrt Tait Limited die berein-

stimmung der Gerte TPDB1A & TPDH5A mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Siehe auch: www.taitradio.com/eudoc/

el Tait Limited TPDB1A &

TPDH5A 1999/5/.

: www.taitradio.com/eudoc/

en Tait Limited declares that this TPDB1A &

TPDH5A complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. See also: www.taitradio.com/eudoc/

es Por medio de la presente Tait Limited declara que las radios TPDB1A &

TPDH5A cumplen con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Vase tambin:

www.taitradio.com/eudoc/

fi Tait Limited vakuuttaa tten ett TPDB1A

& TPDH5A tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Katso: www.taitradio.com/eudoc/

fr Par la prsente, Tait Limited dclare que les appareils TPDB1A & TPDH5A sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Voir aussi: www.taitradio.com/eudoc/

Franais Espaol Suomi 122 Directive 1999/5/CE Declaration of Conformity Tait Software Licence Agreement This Software License Agreement

("Agreement") is between you

(Licensee) and Tait Limited (Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software. If you install or use any of the Software, that will be deemed to be acceptance of the terms of this Agreement. For good and valuable consideration, the parties agree as follows:

SECTION 1 DEFINITIONS Confidential Information means all or any information supplied to or received by Licensee from Tait, whether before or after installation or use and whether directly or indirectly pertaining to the Software and Documentation supplied by Tait, including without limitation all information relating to the Designated Products, hardware, software;

copyright, design registrations, trademarks; operations, processes, and related business affairs of Tait;

and including any other goods or property supplied by Tait to Licensee pursuant to the terms of this Agreement. Designated Products means products provided by Tait to Licensee with which or for which the Software and Documentation is licensed for use. Documentation means product and software documentation that specifies technical and performance features and capabilities; user, operation, and training manuals for the Software; and all physical or electronic media upon which such information is provided. Executable Code means Software in a form that can be run in a computer and typically refers to machine language, which is comprised of native instructions the computer carries out in hardware. Executable code may also refer to programs written in interpreted languages that require additional software to actually execute. Intellectual Property Rights and Intellectual Property mean the following or their substantial equivalents or counterparts, recognized by or through action before any governmental authority in any jurisdiction throughout the world and including, but not limited to all rights in patents, patent applications, inventions, copyrights, trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation;

including any adaptations, corrections, de-compilations, disassemblies, emulations, enhancements fixes, modifications, translations and updates to or derivative works from, the Software or Documentation, whether made by Tait or another party, or any improvements that result from Tait processes or, provision of information services. Licensee means any individual or entity that has accepted the terms of this License. Open Source Software means software with freely obtainable source code and license for modification, or permission for free distribution. Open Source Software License means the terms or conditions under which the Open Source Software is licensed. Tait Software Licence Agreement 123 Person means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority. Security Vulnerability means any flaw or weakness in system security procedures, design, implementation, or internal controls that if exercised

(accidentally triggered or intentionally exploited) could result in a security breach such that data is compromised, manipulated, or stolen, or a system is damaged. Software (i) means proprietary software in executable code format, and adaptations, translations, de-

compilations, disassemblies, emulations, or derivative works of such software; (ii) means any modifications, enhancements, new versions and new releases of the software provided by Tait; and (iii) may contain one or more items of software owned by a third-party supplier. The term "Software" does not include any third-party software provided under separate license or not licensable under the terms of this Agreement. Source Code means software expressed in human readable language necessary for understanding, maintaining, modifying, correcting, and enhancing any software referred to in this Agreement and includes all states of that software prior to its compilation into an executable programme. Tait means Tait Limited and includes its Affiliates. SECTION 2 SCOPE This Agreement contains the terms and conditions of the license Tait is providing to Licensee, and of Licensees use of the Software and Documentation. Tait and Licensee enter into this Agreement in 124 Tait Software Licence Agreement connection with Tait delivery of certain proprietary Software and/or products containing embedded or pre-loaded proprietary Software. SECTION 3 GRANT OF LICENSE 3.1. Subject to the provisions of this Agreement and the payment of applicable license fees, Tait grants to Licensee a personal, limited, non-

transferable (except as permitted in Section 7), and non-exclusive license to use the Software in executable code form, and the Documentation, solely in connection with Licensee's use of the Designated Products for the useful life of the Designated Products. This Agreement does not grant any rights to source code. 3.2. If the Software licensed under this Agreement contains or is derived from Open Source Software, the terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the copyright owner and not in this Agreement. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the any applicable Open Source Software Licenses, the terms and conditions of the Open Source Software Licenses will take precedence. For information about Open Source Components contained in Tait products and the related Open Source licenses, see:

http://support.taitradio.com/go/

opensource SECTION 4 LIMITATIONS ON USE 4.1. Licensee may use the Software only for Licensee's internal business purposes and only in accordance with the Documentation. Any other use of the Software is strictly prohibited. Without limiting the general nature of these restrictions, Licensee will not make the Software available for use by third parties on a "time sharing,"

"application service provider," "service bureau" basis, or for any other similar commercial rental or sharing arrangement. 4.2. Licensee will not, and will not directly or indirectly allow or enable any third party to: (i) reverse engineer, disassemble, extract components, decompile, reprogram, or otherwise reduce the Software or any portion thereof to a human perceptible form or otherwise attempt to recreate the source code; (ii) modify, adapt, create derivative works of, or merge the Software; (iii) copy, reproduce, distribute, lend, or lease the Software or Documentation to any third party;

(iv) grant any sublicense or other rights in the Software or Documentation to any third party; (v) take any action that would cause the Software or Documentation to be placed in the public domain; (vi) remove, or in any way alter or obscure any copyright notice or other notice of Tait or third-

party licensors proprietary rights; (vii) provide, copy, transmit, disclose, divulge or make the Software or Documentation available to, or permit the use of the Software by, any third party or on any machine except as expressly authorized by this Agreement; or (viii) use, or permit the use of, the Software in a manner that would result in the production of a copy of the Software by any means whatsoever other than what is permitted in this Agreement. Licensee may make one copy of the Software to be used solely for archival, back-up, or disaster recovery purposes; provided that Licensee may not operate that copy of the Software at the same time as the original Software is being operated. Licensee may make as many copies of the Documentation as it may reasonably require for the internal use of the Software. 4.3. Unless otherwise authorized by Tait in writing, Licensee will not, and will not enable or allow any third party to: (i) install a copy of the Software on more than one unit of a Designated Product; or (ii) copy or transfer Software installed on one unit of a Designated Product to any other device. Licensee may temporarily transfer Software installed on a Designated Product to another device if the Designated Product is inoperable or malfunctioning. Temporary transfer of the Software to another device must be discontinued when the original Designated Product is returned to operation and the Software must be removed from the other device. 4.4. Licensee will maintain, during the term of this Agreement and for a period of two years thereafter, accurate records relating to this license grant to verify compliance with this Agreement. Tait, or a third party nominated by Tait, may inspect Licensees premises, books and records, upon reasonable prior notice to Licensee, during Licensees normal business hours and subject to Licensee's facility and security regulations. Tait is responsible for the payment of all expenses and costs of the inspection, provided that Licensee shall indemnify Tait for all costs

(including audit costs and legal costs on a solicitor client basis) if Licensee has breached the terms of this Agreement. Any information obtained by Tait during the course of the inspection will be kept in strict confidence by Tait and used solely for the purpose of verifying Licensee's compliance with the terms of this Agreement. SECTION 5 OWNERSHIP AND TITLE Tait, its licensors, and its suppliers retain all of their Intellectual Property Rights in and to the Software and Documentation, in any form. No rights are granted to Licensee under this Agreement by implication, estoppel or Tait Software Licence Agreement 125 otherwise, except for those rights which are expressly granted to Licensee in this Agreement. All Intellectual Property developed, originated, or prepared by Tait in connection with providing the Software, Designated Products, Documentation, or related services, remains vested exclusively in Tait, and Licensee will not have any shared development or other Intellectual Property Rights. SECTION 6 LIMITED WARRANTY; DISCLAIMER OF WARRANTY 6.1. The commencement date and the term of the Software warranty will be a period of one (1) year from Tait shipment of the Software. If Licensee is not in breach of any obligations under this Agreement, Tait warrants that the unmodified Software, when used properly and in accordance with the Documentation and this Agreement, will be free from a reproducible defect that eliminates the functionality or successful operation of a feature critical to the primary functionality or successful operation of the Software. Whether a defect has occurred will be determined solely by Tait. Tait does not warrant that Licensees use of the Software or the Designated Products will be uninterrupted, error-free, completely free of Security Vulnerabilities, or that the Software or the Designated Products will meet Licensees particular requirements. Tait makes no representations or warranties with respect to any third-party software included in the Software. 6.2 Tait sole obligation to Licensee, and Licensees exclusive remedy under this warranty, is to use reasonable efforts to remedy any material Software defect covered by this warranty. These efforts will involve either replacing the media or attempting to correct significant, 126 Tait Software Licence Agreement demonstrable program or documentation errors or Security Vulnerabilities. If Tait cannot correct the defect within a reasonable time, then at Tait option, Tait will replace the defective Software with functionally equivalent Software, license to Licensee substitute Software which will accomplish the same objective, or terminate the license and refund Licensees paid license fee. If Tait investigation of the perceived defect reveals that no such defect in fact exists, Tait may recover its costs in respect of such investigation from Licensee. 6.3. Tait disclaims any and all other warranties relating to the Software or Documentation other than the express warranties set forth in this Section 6. Warranties in Section 6 are in lieu of all other warranties whether express or implied, oral or written, and including without limitation any and all implied warranties of condition, title, non-

infringement, merchantability, or fitness for a particular purpose or use by Licensee (whether Tait knows, has reason to know, has been advised of, or is otherwise aware of any such purpose or use), whether arising by law, by reason of custom or usage of trade, or by course of dealing. In addition, Tait disclaims any warranty to any person other than Licensee with respect to the Software or Documentation. SECTION 7 TRANSFERS 7.1. Licensee will not transfer the Software or Documentation to any third party without specific prior written consent from Tait. Tait may withhold such consent or at its own discretion make the consent conditional upon the transferee paying applicable license fees and agreeing to be bound by this Agreement. 7.2. In the case of a value-added reseller or distributor of Tait Designated Products, the consent referred to in Section 7.1 may be contained in a Tait Reseller or Tait Distributor Agreement. 7.3. If the Designated Products are Tait vehicle-mounted mobile products or hand-carried portable radio products and Licensee transfers ownership of the Tait mobile or portable radio products to a third party, Licensee may assign its right to use the Software which is embedded in or furnished for use with the radio products and the related Documentation; provided that Licensee transfers all copies of the Software and Documentation to the transferee. 7.4. For the avoidance of any doubt, Section 7.3 excludes TaitNet Infrastructure, or the products listed at any time under network products at:

http://www.taitradio.com. 7.5. If Licensee, as a contractor or subcontractor (integrator), is purchasing Tait Designated Products and licensing Software not for its own internal use but for end use only by a Customer, the Licensee may transfer such Software, but only if a) Licensee transfers all copies of such Software and the related Documentation to the transferee and b) Licensee has first obtained from its Customer (and, if Licensee is acting as a subcontractor, from the interim transferee(s) and from the ultimate end user sub license) an enforceable sublicense agreement that prohibits any other transfer and that contains restrictions substantially identical to the terms set forth in this Software License Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorised by this Section may not otherwise transfer or make available any Tait Software to any third party nor permit any party to do so. Licensee will, on request, make available evidence reasonably satisfactory to Tait demonstrating compliance with all the foregoing. SECTION 8 TERM AND TERMINATION 8.1. Licensees right to use the Software and Documentation will commence when the Designated Products are supplied by Tait to Licensee and will continue for the life of the Designated Products with which or for which the Software and Documentation are supplied, unless Licensee breaches this Agreement, in which case this Agreement and Licensee's right to use the Software and Documentation may be terminated immediately upon notice by Tait. 8.2. Within thirty (30) days after termination of this Agreement, Licensee must certify in writing to Tait that all copies of the Software have been removed or deleted from the Designated Products and that all copies of the Software and Documentation have been returned to Tait or destroyed by Licensee and are no longer in use by Licensee. 8.3. Licensee acknowledges that Tait made a considerable investment of resources in the development, marketing, and distribution of the Software and Documentation and that Licensee's breach of this Agreement will result in irreparable harm to Tait for which monetary damages would be inadequate. If Licensee breaches this Agreement, Tait may terminate this Agreement and be entitled to all available remedies at law or in equity including immediate injunctive relief and repossession of all non-

embedded Software and associated Documentation. Licensee shall pay all Tait costs (on an indemnity basis) for the enforcement of the terms of this Agreement. SECTION 9 CONFIDENTIALITY Licensee acknowledges that the Software and Documentation contain proprietary and Confidential Information valuable to Tait and are Tait Software Licence Agreement 127 Tait trade secrets, and Licensee agrees to respect the confidentiality of the information contained in the Software and Documentation. SECTION 10 LIMITATION OF LIABILITY 10.1. In no circumstances shall Tait be under any liability to Licensee, or any other person whatsoever, whether in Tort (including negligence), Contract

(except as expressly provided in this Agreement), Equity, under any Statute, or otherwise at law for any losses or damages whether general, special, exemplary, punitive, direct, indirect, or consequential arising out of or in connection with any use or inability of using the Software. 10.2. Licensees sole remedy against Tait will be limited to breach of contract and Tait sole and total liability for any such claim shall be limited at the option of Tait to the repair or replacement of the Software or the refund of the purchase price of the Software. SECTION 11 GENERAL 11.1. COPYRIGHT NOTICES. The existence of a copyright notice on the Software will not be construed as an admission or presumption of publication of the Software or public disclosure of any trade secrets associated with the Software. 11.2. COMPLIANCE WITH LAWS. Licensee acknowledges that the Software may be subject to the laws and regulations of the jurisdiction covering the supply of the Designated Products and will comply with all applicable laws and regulations, including export laws and regulations, of that country. 11.3. ASSIGNMENTS AND SUBCONTRACTING. Tait may assign its rights or subcontract its obligations under this Agreement, or encumber or sell its rights in any Software, without prior notice to, or consent of, Licensee. 128 Tait Software Licence Agreement 11.4. GOVERNING LAW. This Agreement shall be subject to and construed in accordance with New Zealand law and disputes between the parties concerning the provisions hereof shall be determined by the New Zealand Courts of Law. Provided however Tait may at its election bring proceedings for breach of the terms hereof or for the enforcement of any judgment in relation to a breach of the terms hereof in any jurisdiction Tait considers fit for the purpose of ensuring compliance with the terms hereof or obtaining relief for breach of the terms hereof. 11.5. THIRD-PARTY BENEFICIARIES. This Agreement is entered into solely for the benefit of Tait and Licensee. No third party has the right to make any claim or assert any right under this Agreement, and no third party is deemed a beneficiary of this Agreement. Notwithstanding the foregoing, any licensor or supplier of third-party software included in the Software will be a direct and intended third-party beneficiary of this Agreement. 11.6. SURVIVAL. Sections 4, 5, 6.3, 7, 8, 9, 10, and 11 survive the termination of this Agreement. 11.7. ORDER OF PRECEDENCE. In the event of inconsistencies between this Agreement and any other Agreement between the parties, the parties agree that, with respect to the specific subject matter of this Agreement, this Agreement prevails. 11.8. SECURITY. Tait uses reasonable means in the design and writing of its own Software and the acquisition of third-party Software in order to limit Security Vulnerabilities. While no software can be guaranteed to be free from Security Vulnerabilities, if a Security Vulnerability is discovered, Tait will take the steps specified in Section 6 of this Agreement. 11.9. EXPORT. Licensee will not transfer, directly or indirectly, any Designated Product, Documentation or Software furnished hereunder or the direct product of such Documentation or Software to any country for which New Zealand or any other applicable country requires an export license or other governmental approval without first obtaining such license or approval. 11.10. SEVERABILITY. In the event that any part or parts of this Agreement shall be held illegal or null and void by any court or administrative body of competent jurisdiction, such determination shall not affect the remaining terms which shall remain in full force and effect as if such part or parts held to be illegal or void had not been included in this Agreement. Tait may replace the invalid or unenforceable provision with a valid and enforceable provision that achieves the original intent and economic effect of this Agreement. 11.11. CONSUMER GUARANTEES. Licensee acknowledges that the licenses supplied in terms of this agreement are supplied to Licensee in business, and that the guarantees and other provisions of prevailing consumer protection legislation shall not apply. 11.12. WHOLE AGREEMENT. Licensee acknowledges that it has read this Agreement, understands it and agrees to be bound by its terms and conditions. Licensee also agrees that, subject only to the express terms of any other agreement between Tait and Licensee to the contrary, this is the complete and exclusive statement of the Agreement between it and Tait in relation to the Software. This Agreement supersedes any proposal or prior agreement, oral or written, and any other communications between Licensee and Tait relating to the Software and the Designated Products. Tait Software Licence Agreement 129 130 Tait Software Licence Agreement

 

 

TP9400 P25 Portable Radios Users Guide MPD-00003-03 Issue 3 September 2013 (DRAFT) Contents For your safety...................................................... 10 Menu maps............................................................ 20 1 About this guide .................................................. 22 Safety warnings used in this guide ................................. 22 Related documentation................................................... 22 2 Before using your radio ...................................... 24 For your safety battery warning................................... 25 Attaching labels to the radio or battery ........................... 25 Attaching a label to the front panel............................. 26 Charging the battery before first use .............................. 26 Attaching the battery....................................................... 27 Removing the battery ..................................................... 27 Attaching the antenna..................................................... 27 Removing the antenna ................................................... 28 Attaching a belt clip ........................................................ 28 Removing a belt clip ....................................................... 28 Installing an accessory ................................................... 28 3 Getting started ..................................................... 30 About P25 digital radios.................................................. 31 Lack of static noise..................................................... 31 Coverage.................................................................... 31 P25 phase 2 digital operation..................................... 31 About the radio controls.................................................. 32 Understanding the radio display ..................................... 34 Radio display icons .................................................... 34 Understanding the radio indicators................................. 36 Status indicators......................................................... 36 Audible tones.............................................................. 37 Using function keys to access frequently used features. 38 Viewing the function key settings ............................... 38 Navigating the radios menus ......................................... 39 Using the Main menu ................................................. 39 Accessing frequently used menus.............................. 40 4 Basic operation .................................................... 42 Turning the radio on and off ........................................... 43 Security lock on power-up feature.............................. 43 Adjusting the speaker volume ........................................ 44 Locking and unlocking the keypad ................................. 44 Contents 3 Using a wireless headset ............................................... 45 Wearing the headset .................................................. 45 Pairing a wireless headset with the radio................... 46 Managing your headsets............................................ 47 Selecting a zone............................................................. 49 Selecting a channel........................................................ 50 Limiting call time............................................................. 51 Checking recent calls ..................................................... 52 5 Operating in conventional mode ........................53 Making calls.................................................................... 54 Making an individual call ............................................ 54 Understanding talkgroups .......................................... 55 Making an emergency call ......................................... 56 Receiving calls ............................................................... 57 Identifying a caller (talking party ID)........................... 57 Receiving a two-tone call ........................................... 58 Communicating directly with other radios....................... 59 Checking that the channel is clear ................................. 60 Turning monitor on and off ......................................... 60 Using the radio in different repeater areas..................... 60 Selecting a voting group............................................. 61 Suspending a channel from a voting group................ 61 Hearing faint and noisy signals ...................................... 62 Turning squelch override on and off........................... 62 6 Operating in P25 trunking mode .........................63 About P25 trunking......................................................... 64 Checking that the system is available ............................ 64 Making a talkgroup call................................................... 66 Receiving a talkgroup call .............................................. 68 Making an individual call ................................................ 68 Receiving an individual call ............................................ 69 Emergency calls............................................................. 70 Making a phone call ....................................................... 71 Unconnected calls.......................................................... 72 Failsoft mode operation.................................................. 73 Radio-based failsoft ................................................... 73 Infrastructure failsoft................................................... 73 Dynamic regrouping ....................................................... 74 7 Scanning ...............................................................75 About scanning............................................................... 76 Activating standard scanning ......................................... 77 Activating background scanning..................................... 78 Changing the background scan group assigned 4 Contents to the function key ...................................................... 78 Activating in-zone scanning............................................ 79 Activating talkgroup scanning......................................... 80 Making a call while scanning .......................................... 80 Suspending a channel from a scan group ...................... 81 Editing a scan group....................................................... 82 Selecting a group to edit............................................. 82 Viewing group membership........................................ 83 Adding a channel to a group ...................................... 84 Deleting a channel from a group ................................ 84 Changing a groups transmit channel......................... 85 Changing a groups first or second priority channel ... 85 8 P25 services ......................................................... 86 Messages ....................................................................... 87 Sending a message.................................................... 87 Status update ................................................................. 89 Status request ................................................................ 90 Call alert ......................................................................... 91 Radio check.................................................................... 92 Radio unit monitor .......................................................... 93 Radio inhibit and uninhibit .............................................. 94 9 GPS location services ......................................... 96 About GPS location information ..................................... 97 About GPS status information ........................................ 97 Viewing GPS information................................................ 98 Sending GPS information ............................................... 98 Receiving and logging GPS information....................... 100 Accessing logged GPS information .............................. 101 10 Emergency operation ........................................ 102 About emergency calls ................................................. 103 Making a priority call..................................................... 104 Standard emergency mode .......................................... 105 What happens during an emergency call? ............... 105 Activating emergency mode ..................................... 106 About manual emergency operation............................. 106 Making a manual emergency call............................. 107 Receiving a manual emergency call......................... 108 Cancelling a manual emergency call........................ 108 Accessing emergency GPS location information.......... 110 Using the Location menu.......................................... 110 Using the Last stored menu ..................................... 111 Loneworker monitoring ................................................. 111 Activating loneworker monitoring.............................. 112 Contents 5 Responding to a loneworker alarm .......................... 112 Delaying the emergency action

(conventional mode only) ......................................... 113 11 Encryption ...........................................................114 About encryption .......................................................... 115 About the proper key detect feature......................... 115 Encrypting calls ............................................................ 115 Making an encrypted call.............................................. 116 Receiving an encrypted call ......................................... 117 Changing the radios encryption key ............................ 117 Changing the transmit encryption key...................... 118 Changing the transmit encryption key back to the default setting..................................................... 118 Changing the encryption keyset............................... 118 Removing encryption keys from the radio.................... 119 Deleting an encryption key....................................... 119 Deleting all encryption keys ..................................... 119 Updating encryption keys over-the-air.......................... 120 Using an encryption demonstration key ....................... 120 Activating the demo key ........................................... 120 Making an encrypted call using the demo key ......... 121 Receiving an encrypted call using the demo key ..... 121 12 Customizing radio settings ...............................122 Extending battery life on a shift .................................... 123 Turning low power transmit on or off........................ 123 Changing the volume of all audible indicators.............. 124 Changing the volume of keypress tones ...................... 124 Changing to quiet operation ......................................... 125 Changing to silent operation......................................... 125 Turning on backlighting ................................................ 126 Turning backlighting on momentarily ....................... 126 Adjusting the display contrast....................................... 127 13 Charging and caring for batteries .....................128 About the chargers....................................................... 129 Before using the charger.............................................. 129 Handle the battery safely ......................................... 129 Attaching of labels.................................................... 130 Charging temperatures ............................................ 130 Temperature indications........................................... 131 Leaving the battery on charge.................................. 131 Low battery warning ................................................. 132 Charging the battery..................................................... 133 6 Contents LED behavior............................................................ 134 Removing the battery from the charger.................... 134 Maintaining battery life and performance ..................... 135 Cleaning the contacts of the battery......................... 135 Storing batteries ........................................................... 136 Using batteries after storage .................................... 136 Disposing of batteries ................................................... 136 14 Troubleshooting ................................................ 137 About troubleshooting................................................... 138 System error message ................................................. 138 When your radio wont turn on...................................... 138 Identifying the radios audible tones ............................. 139 Viewing radio information ............................................. 139 Changing the radio ID................................................... 140 Running diagnostics tests............................................. 140 General care................................................................. 142 Cleaning the contacts of the battery......................... 142 Cleaning the radio .................................................... 142 15 Glossary ............................................................. 143 Index .................................................................... 147 Directive 1999/5/CE Declaration of Conformity 152 Tait Software Licence Agreement..................... 153 Contents 7 Copyright and trademarks All information contained in this document is the property of Tait Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Limited. The word TAIT and the TAIT logo are trademarks of Tait Limited. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this document. Tait Limited accepts no responsibility for damage arising from use of the information contained in the document or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. Enquiries and comments If you have any enquiries regarding this document, or any comments, suggestions and notifications of errors, please contact your regional Tait office. Updates of manual and equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait Limited reserves the right to update the equipment or this document or both without prior notice. Intellectual property rights This product may be protected by one or more patents or designs of Tait Limited together with their international equivalents, pending patent or design applications, and registered trade marks: NZ 409837, NZ 409838, NZ 415277, NZ 415278, NZ 508806, NZ 508807, NZ 511155, NZ 516280/NZ 519742, NZ 520650/NZ537902, NZ 521450, NZ 524369, NZ 524378, NZ 524509, NZ 524537, NZ 530819, NZ 534475, NZ 534692, NZ 537434, NZ 547713, NZ 569985, NZ 577009, NZ 579051, NZ 579364, NZ 580361/NZ 601933, NZ 584534, NZ 586889, AU 2003281447, AU 2004216984, AU 2010212364, AU 11677/2008, AU 13745/2008, 8 CN 200930004199.5, CN 1031871, CN 1070368, CN 200930004200.4, CN 200930009301.0, CN 201110141630, CN 201110253742.1, EU 000915475-

0001, EU 000915475-0002, GB 2413249, US 5,745,840, US 7,649,893, US 7,758,996, US7,937,661, US 8,301,682, US 10/597339, US 29/401234, US 29/401235, US 61/218015, US 61/236663, US 61/323437. This product may also be made under license under one or more of the following U.S. Patents: 5,146,497, 5,148,482, 5,164,986, 5,185,795, 5,185,796, 5,271,017, 5,377,229 and 5,502,767. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. Protected by U.S. Patents 5,870,405, 5,826,222, 5,754,974, 5,701,390, 5,715,365, 5,649,050, 5,630,011, 5,581,656, 5,517,511, 5,491,772, 5,247,579, 5,226,084 and 5,195,166. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait Limited is under licence. Other trademarks and trade names are those of their respective owners. Environmental responsibilities Tait Limited is an environmentally responsible company which supports waste minimization, material recovery and restrictions in the use of hazardous materials. The European Unions Waste Electrical and Electronic Equipment (WEEE) Directive requires that this product be disposed of separately from the general waste stream when its service life is over. For more information about how to dispose of your unwanted Tait product, visit the Tait WEEE website at www.taitradio.com/weee. Please be environmentally responsible and dispose through the original supplier, or contact Tait Limited. Tait Limited also complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive in the European Union. In China, we comply with the Measures for Administration of the Pollution Control of Electronic Information Products. We will comply with environmental requirements in other markets as they are introduced. 9 For your safety Before using your radio, please read the following important safety and compliance information. Radio frequency exposure information For your own safety and to ensure you comply with the Federal Communication Commissions (FCC) radio frequency (RF) exposure guidelines, please read the following information before using this radio. Using this radio You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to. It is also important that you:

Do not remove the RF Exposure label from the radio. Ensure this RF exposure information accompa-

nies the radio when it is transferred to other users. Do not use the radio if you do not adhere to the guidelines on controlling your exposure to RF. Controlling your exposure to RF energy This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure. 10 For your safety To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:

Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rap-

idly the further away the antenna is from your body. Keep the antenna at least one inch (2.5 cm) from your face at all times. If you wear your radio, you must always put it in a carrying accessory that has been specifically approved by Tait for this radio. Using non-

approved body-worn accessories may mean you expose yourself to higher levels of RF than recom-

mended by the FCCs occupational/controlled environment RF exposure limits. Ensure you only use Tait-approved antennas, bat-

teries, and accessories. For more information on what RF energy is and how to control your exposure to it, visit the FCC website at www.fcc.gov/oet/rfsafety/rf-faqs.html. Compliance with RF energy exposure standards This two-way radio complies with these RF energy exposure standards and guidelines:

United States Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, and 2.1093. For your safety 11 American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1992. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1999 Edition. European Directive 2008/40/EC on minimum health and safety requirements regarding the exposure of workers to the risks arising from phys-

ical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen. Conformit aux normes dexposition lnergie RF Cette radio metteur-rcepteur se conforme aux normes et aux rglements dexposition lnergie RF :

La Commission fdrale de la communication des Etats-Unis, Code de rglements fdraux (CFR) Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios mobiles) ou 2.1093 (radios portatives). American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-1992. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-1999 Edition. La directive europenne 2004/40/EC concernant les prescriptions minimales de scurit et de san-

t relatives l'exposition des travailleurs aux ris-

ques dus aux agents physiques (champs lectromagntiques). Cette radio se conforme aux limites dexposition de lIEEE (FCC) et ICNIRP pour les environnements dexposition au rayonnement RF professionnel et contrl aux cycles de marche de 50% en mode transmission et 50% en mode rception. 12 For your safety Radio frequency emissions limits in the USA CFR Title 47 Part 15.19 (a) (1) -

Receivers Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CFR Title 47 Part 15.19 (a) (3) - All other devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Radio frequency emissions limits in Canada This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For your safety 13 USA public safety bands

(764 776 MHz and 794 806 MHz) The Code of Federal Regulations (CFR) Title 47 Subpart R deals with the use of frequencies in the 764 to 776 MHz and 794 to 806 MHz bands. Low-power channels This radio complies with 90.531 (b) (3) and 90.531 (b) (4) of 47 CFR. These sections state that only low-power transmission is permitted on the following channels:

Regional Planning channels, as defined in 90.531 (b) (3). Itinerant channels, as defined in 90.531 (b) (4). Use of encryption This radio complies with 90.553 (a) of 47 CFR. This states that:

Encryption is not permitted on the nationwide Interoperability calling channels. These channels are defined in 90.531 (b) (1) (ii). Radios using encryption must have a readily accessible switch or control to allow the radio user to disable encryption. EMC regulatory compliance in Australia This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at www.acma.gov.au. 14 For your safety Frequency band reserved for distress beacons Frequency band 406 to 406.1 MHz is reserved for use by distress beacons. Transmissions should not be made within this frequency band. Health, safety and electromagnetic compatibility in Europe In the European Community, radio and telecommunications equipment is regulated by Directive 1999/5/EC, also known as the Radio and Telecommunications Terminal Equipment (R&TTE) directive. The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. Intended purpose of product This product is an FM radio transceiver. It is intended for radiocommunication in the Private Mobile Radio

(PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA). Restrictions This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state. This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license requirements must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission. For your safety 15 Declaration of conformity Brief Declarations of Conformity appear on on page 152 of this booklet. To download the formal declaration of conformity, go to www.taitradio.com/

eudoc. Interference with electronic devices Warning Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are:

aircraft electronic systems vehicular electronic systems such as fuel injec-

tion, anti-skid brakes, and cruise control medical devices such as hearing aids and pace-

makers medical equipment in hospitals or health care facilities. Switch off the radio before boarding an aircraft. Using your radio while in the air is not permitted. Consult the manufacturer (or its representative) of any such electronic devices to determine whether electronic circuits in those devices will perform normally when the radio is transmitting. Warning If you have a pacemaker:

immediately turn off the radio if you suspect it is interfering with the pacemaker keep the radio at least 6 inches (15 cm) from the pacemaker while the radio is on use the radio on your right side to minimize inter-

ference never carry the radio in a breast pocket. 16 For your safety If there is interference between your hearing aid and the radio, please discuss an alternative solution with the hearing aid manufacturer. Potentially explosive atmospheres and blasting areas Warning Unless the radio is specifically certified for use in a potentially explosive atmosphere, turn off the radio before entering such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include filling stations, and any environment where there are flammable liquids, gases, or dusts. Warning Turn off the radio before approaching blasting caps, a blasting area, or any area where you are instructed to turn off a two-way radio. Obey all signs and instructions. Interference with blasting operations could cause serious injury or death. Radio installation and operation in vehicles Warning Keep the radio away from airbags and airbag deployment areas. Do not install, charge, or place a radio near such areas. An activated airbag can propel a portable radio with sufficient force to cause serious injury to vehicle occupants. An airbag may not perform to specification if obstructed by a radio. Warning To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or battery cables, refer to the installation guide for the radio, and to the vehicle manufacturers manual, before installing electronic equipment in the vehicle. Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. For your safety 17 Vehicle charger installation and operation For detailed instructions necessary to the safe installation and operation of the vehicle charger, please refer to the documentation supplied with the vehicle charger. Multicharger safety information Warning This device must be connected to an earthed mains socket-outlet. Norsk (no): Apparatet m tilkoples jordet stikkontakt. Suomi (fi): Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Svenska (sv): Apparaten skall anslutas till jordat uttag. Electromagnetic compatibility in European vehicles In the European Community, radio equipment fitted to automotive vehicles is regulated by Directive 72/245/

EEC and its amendments. The requirements of this directive cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. Unapproved modifications or changes to radio The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait. Failure to do so could invalidate compliance requirements and void the users authority to operate the radio. 18 For your safety Attaching of labels Warning Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Caution Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. If you must attach a customized label, use only a thin gummed paper label applied to the bottom 25% of the radio chassis label and/or to the top 25%

of the battery label. Do not obstruct the vent holes

(see Warning above). Do not allow the paper label to extend beyond the recessed label area or to conceal relevant product information. Use of lithium-ion batteries Warning A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Short-circuiting battery contacts Warning Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuiting the battery contacts can heat up the conductive material and cause personal injury and/or damage to property. For your safety 19 Menu maps This section shows the menus and submenus that may be programmed for your radio. Some features are controlled by software licenses (SFEs) and may not be available with your radio. Main menu Channels Zones Individual call Phone call Dial radio call Services Acknowledge Last stored Wireless headset Emergency Connect Reconnect last Disconnect Connection information Manage headsets Find new devices Options Power-on option Confirm connect Radio settings See detailed menus on the following page. Location Services GPS information GPS logs Send logs Send on PTT Diagnostics Messages Status update Status request Call alert Radio check Radio monitor Radio inhibit Radio uninhibit Talkgroups Priority call Recent calls Security Encryption Change all Preset keys Change keyset OTAR Rekey request Advanced Zeroize key Zeroize all Demo key Trunking Site lock Dynamic regrouping Band scan Repeater Hunt force Hunt toggle Repeater toggle 20 Menu maps Radio info Key settings Version info Radio FW Radio HW Radio ID Serial number Alias Customer info P25 IP address MDT IP address Advanced Edit groups Radio settings Functions Low power tx Monitor Lock radio Set scan key Squelch override Scanning Call Settings Ignore 2-tone Call queuing Extra features Loneworker Alert settings Indicator level Keypress tones Quiet operation Silent operation Display settings Backlighting Contrast adjust Talk party ID RSSI Menu maps 21 1 About this guide This users guide provides information about TP9400 portable radios. If your radio does not operate as you expect, contact your radio provider for assistance. Safety warnings used in this guide Please follow exactly any instruction that appears in the text as an alert. An alert provides necessary safety information as well as instruction in the proper use of the product. This users guide uses the following types of alert:

Warning This alert is used when there is a hazardous situation which, if not avoided, could result in death or serious injury. Caution This alert is used when there is a hazardous situation which, if not avoided, could result in minor or moderate injury. Notice This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. Related documentation The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website

(http://support.taitradio.com):

Safety and Compliance Informationsupplied with each radio. (The same information is included in this users guide.) 22 About this guide Li-ion Battery Safety Informationsupplied with each Li-ion battery. Battery Care and Charging Guidesupplied with each charger. (The same information is in the sec-

tion "Charging and caring for batteries".) About this guide 23 2 Before using your radio Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time allow 2.5 hours for this. This section covers:

For your safety battery warning Attaching labels to the radio or battery Charging the battery before first use Attaching the battery Removing the battery Attaching the antenna Removing the antenna Attaching a belt clip Removing a belt clip Installing an accessory 24 Before using your radio For your safety battery warning Warning This radiouses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. Attaching labels to the radio or battery Warning Do not cover the battery vent hole or the vent hole on the radio chassis. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Notice Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Before using your radio 25 Attaching a label to the front panel If a customer requires an additional label, attach the label in the spare label recess in the bottom edge of the radio front panel. In this position, the label is still visible while the battery is attached to the radio. spare label recess The diagram below shows the specified dimensions of the label. n

) i m m 7

8 2 0

. R0.13 in

(3.2 mm) 1.22 in (31 mm) maximum label thickness: 0.03 in (0.8 mm) Charging the battery before first use Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section Charging and caring for batteries on page 128. For best charging performance, switch off the radio before placing it in the charger. 26 Before using your radio Attaching the battery Notice Fit the bottom edge of the battery to the radio, then the top edge. Attempting to fit the top edge first may damage the contacts. 1 Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. 2 Holding the radio firmly, align the back of the battery with the back of the chassis. 3 Place the two lugs at the bottom edge of the battery into the two slots in the bottom of the front panel. 4 Lightly press the top of the battery towards the radio until the battery catch clicks. 5 Make sure that the battery is firmly in position. Removing the battery The battery is secured to the radio by a battery catch in the radios rear panel. To remove the battery from the radio, so that the battery can be charged or replaced:

1 Slide the battery catch up. 2 From the sides, pull the battery away from the radio. Attaching the antenna Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it does not unscrew easily. This is important as it creates a seal. Before using your radio 27 Removing the antenna Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it. Attaching a belt clip To attach a belt clip to the radio:

1 Slide the belt clip into the two grooves at the top of the battery. 2 Press down on the belt clip until it snaps into place. Removing a belt clip The belt clip has been designed to prevent accidental removal, but you can take it off, if required. To remove a belt clip from a battery:

1 Insert a flat screwdriver blade or similar flat object under the lip of the release lock (that is, between it and the metal slider). 2 Lift the release lock up (away from the metal slider) and hold it in position. 3 Slide the belt clip out. Installing an accessory Accessories plug into the radios accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. Notice The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an accessory:

28 Before using your radio 1 Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio. 2 Remove the accessory cover and store it in a safe place. 3 Plug the accessory into the accessory connector. 4 Tighten the screw. Before using your radio 29 3 Getting started This section gives an overview of your P25 radio, describes the radios controls and indicators, and explains how the radio menus are organized. This section covers:

About P25 digital radios About the radio controls Understanding the radio display Understanding the radio indicators Using function keys to access frequently used fea-

tures Navigating the radios menus 30 Getting started About P25 digital radios Your P25 digital radio can be programmed for P25 conventional or P25 trunked operation. Analog conventional operation is also available, with dual-

mode channels able to transmit and receive both digital and analog calls. You may notice differences between digital and analog calls in terms of:

static noise in low signal areas, and radio coverage in marginal reception areas. Lack of static noise On digital networks there is no static noise, even in low signal areas. This lack of static is because your digital radio removes the noise from the call, so that you hear only clear voice. Coverage With digital networks, a call remains clear and then drops off quickly at the border of a coverage area. The reason for this is that a digital call is either received or it isn't. With analog networks, the background noise in a call gets progressively worse when you are in fringe areas or even slightly outside normal coverage areas. P25 phase 2 digital operation This feature is controlled by a software license

(SFE) and may not be available with your radio. TM9400 radios are software-upgradeable to P25 phase 2 operation. Contact your radio provider for more information on software releases and P25 phase 2 availability for your radio. Getting started 31 About the radio controls The radio controls are the PTT key, power/volume control, channel selector, 3-way selector control

(optional), scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses:

a short key press is less than one second, and a long key press is more than one second. The radio controls and their functions are described in the following sections. channel selector function key 1 status LED speaker /

microphone display scroll keys right selection key alphanumeric keys 3-way selector control (optional) power / volume control function key 2 PTT key

(press-to-talk) function key 3 function key 4 left selection key 32 Getting started Name PTT key Power/volume control Channel selector 3-way selector

(optional) Left and right selection keys Scroll keys Function Press and hold to transmit and release to listen Rotate to turn the radio on and change the speaker volume Select and change channels Select frequently used features Action determined by the text above the selection key Scroll up and down through a list of menu options, scroll left and right in messages, or select the Quick Access menu Function keys Programmed for frequently used options Alphanumeric keys Used to enter letters and numbers Getting started 33 Understanding the radio display The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. Radio display icons These are some of the icons you may see on your radio display:

Icon Meaning Signal strength indicator: the more bars, the stronger the signal being received by your radio Zone: this letter represents the zone in which your radio is operating, where A is zone 1, Z is zone 26 and AD is zone 30

(in the example shown, K represents zone 11) Trunking system available: your radio is operating on a P25 trunking system Transmit: your radio is transmitting Low-power transmit: Low-power transmit: your radio is set to transmit on low power Repeater talkaround: your radio is operating in repeater talkaround mode, or you are on a simplex channel Silent operation: your radios audible tones have been turned off Encryption: your radios transmissions are encrypted Scanning: your radio is monitoring a group of channels or talkgroups for activity Scanning: your radio is monitoring a group of channels or talkgroups for activity, and the currently selected channel or talkgroup is a member of the scan group. Headset connected: there is a wireless headset connected to your radio Flashing: your radio is attempting to connect to a headset, or the headset connection has been lost Monitor or squelch override: monitor or squelch override is active 34 Getting started Icon Meaning Battery indicator: shows how much charge is available in the battery Battery in charger: appears when you place a radio (with a battery attached) in the charger Scrolling: you can use or or access a Quick Reference menu to move through a list, Getting started 35 Understanding the radio indicators The status LED indicator and the radios audible tonestogether with the radio displayall combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. Status indicators status LED Color Red

(transmit) Green

(receive) Meaning Glowing: your radio is transmitting Glowing: the current channel is busy Flashing: you have received a call 36 Getting started Audible tones The radio uses audible tones to alert you to its status:

Radio controls and keypress tonesthe tones and beeps you hear when you press your radios keys or use the controls. Incoming call tonewhen the radio is receiving a call. Warning toneswhen there is an error, or the bat-

tery is low, for example. Warning If quiet or silent mode is turned on, you will not hear any alert tones. Some of the more common audible tones are described below:

Tone Meaning One short beep Valid keypress: the action you have attempted is permitted Function activated: a function has been turned on (using either the Main menu or a function key) One long, low-

pitched beep Invalid keypress: the action you have attempted is not permitted Transmission inhibited: you have attempted to transmit, but for some reason you cannot make a call at this time One short, low-pitched beep Two short beeps Function deactivated: a function has been turned off (using either the Main menu or a function key) Radio turned on: the radio is powered on and ready to use Getting started 37 Using function keys to access frequently used features The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press. function key 1

(emergency key) function key 2 function key 3 function key 4 Viewing the function key settings Use the Main menu to check the features assigned to your radios function keys:

1 Press Menu and select Radio settings > Radio info > Key settings. 2 In the Key Settings menu, scroll through the list of function keys. 3 Press Select to view details of the function associated with a particular function key. The example shown is for a function key programmed to turn backlighting on and off. Backlighting toggle Back OK 4 Press Back to return to the Key Settings menu. 38 Getting started Navigating the radios menus Your radio has a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. Using the Main menu To access the Main menu, press the right selection key whenever Menu appears above it. Channel 12 Zone 11 Lock Menu Use the scroll keys to move through the menu list. Main menu Zones Individual call Back Select When the menu you want is highlighted, press Select to open the menu you have chosen. To quickly exit the menu system, press and hold the left selection key when the word Cancel or Back appears above it. Getting started 39 Accessing frequently used menus Depending on how your radio is programmed, you may have two different Quick Access menus. One Quick Access menu is displayed when you press a scroll key, and the other when you press the left selection key. These give you easy access to the menus you use most often. Using the scroll key Quick Access menu There are two ways to use this Quick Access menu:

Use the scroll keys to scroll through a list of zones or channels. Press the scroll keys and the Quick Access menu appears. In this example, the Channels menu is the Quick Access menu. Use the scroll keys to go directly to the Channels menu. Channel 12 Zone 11 Menu The Channels menu, with a list of your available channels, is now displayed. Channels Channel 1 Channel 2 Back Select 40 Getting started Using the left selection key Quick Access menu The text above the left selection key corresponds to the Quick Access menu, for example, Zones. To use this Quick Access menu:

Press the left selection key and the associated menu appears. Channel 12 Zone 11 Zones Menu Getting started 41 4 Basic operation This section describes the basic operation of your radio. This section covers:

Turning the radio on and off Adjusting the speaker volume Locking and unlocking the keypad Using a wireless headset Selecting a zone Selecting a channel Limiting call time Checking recent calls 42 Basic operation Turning the radio on and off Rotate the power/volume control switch clockwise to turn the radio on. Rotate the switch counterclockwise to turn the radio off. When the radio is first turned on, the status LED briefly glows red, and the radio gives two short beeps. Your radio may not turn on if your battery is very low. (See "Low battery warning" on page 132.) Using protective power-down If your radio is programmed with the protective power-down feature, you also need to press either function key 2 (side key 1) or function key 3 (side key 2) in order to turn off the radio. This prevents you inadvertently turning off the radio when adjusting the volume to a low level. To turn the radio off:

Rotate the power/volume control switch fully coun-

terclockwise. Short press either function key 2 or 3

(side key 1 or 2). Security lock on power-up feature Your radio may be automatically locked each time it is powered-up. If the message Enter PIN appears in the display, enter your assigned PIN (personal identification number). See Unlocking the radio below. Locking the radio 1 Press Menu and select Radio settings >

Functions > Lock radio. (Depending on how your radio is programmed, you may be able to press a function key to turn radio lock on and off.) 2 Scroll to either On or Off and press Select.

(The current setting is highlighted.) Basic operation 43 The radio is now locked, and the message Enter PIN appears in the display. The radio remains locked until the correct sequence of keys is pressed. If you forget the unlock sequence or you do not know it, contact your radio provider for assistance. Unlocking the radio To unlock your radio, use the unlock sequence you have been given. (This is a pre-programmed sequence of four keys.) Adjusting the speaker volume Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radios audible indicators. Locking and unlocking the keypad The keypad lock feature prevents you from pressing a key accidentally. The number of keys that are locked depends on the way your radio is programmed. If you receive a call while the keypad is locked, press any key to answer. To lock the keypad:

Press and hold the right selection key for about one second.

(Depending on your radio model and the way it is programmed, you may be able to use the left selection key, or your radio may have a 3-way selector that can be used to lock the keypad.) 44 Basic operation The message Keypad locked briefly appears in the display, and Unlock appears above the right selection key, in place of Menu. When any of the locked keys are pressed, the message Keypad lock active appears. To unlock the keypad:

Press and hold the right selection key for about one second. Using a wireless headset This feature is controlled by a software license

(SFE) and may not be available with your radio. You may be able to connect a Bluetooth wireless headset to your radio, using the Wireless Headset menu or a function key. When you have selected a menu option in the Wireless Headset menu, you can still receive and reply to calls without interrupting the selected operation. Headset compatibility with Tait radios Bluetooth wireless headsets may operate with Tait radios, provided the headset:

Is compatible with the Bluetooth Specification Ver-

sion 2.0 or higher. Tait recommends Bluetooth Specification Version 2.1 or higher. Includes Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile

(HFP) version 1.5 or 1.6. Wearing the headset Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. To get the best performance from your headset:

Basic operation 45 1 Do not block the devices internal antenna (see the devices user documentation). The human body can interfere with a Bluetooth signal. 2 If you usually use your radio with your right hand, wear the headset on your right ear. 3 Avoid coming in contact with the internal antenna of a headset or radio. Pairing a wireless headset with the radio Before attempting to connect a wireless headset, Tait recommends that the headset is fully charged. Refer to the headset installation instructions for charging instructions. Pairing creates a unique and encrypted wireless link between the Bluetooth-capable radio, and the Bluetooth headset. To use a headset with your radio, the devices must first be paired. When you connect to a wireless headset for the first time, you need to instruct the radio to search for compatible headsets using Bluetooth wireless technology. The search should take less than one minute. To pair a wireless headset with the radio:

1 Turn on the radio. 2 Put the wireless headset into pairing mode. Refer to the headset installation instructions for instructions on how to do this. 3 Press Menu and select Wireless headset > Find new devices. Wireless headset Find new devices Options Back Select The New Devices menu opens, and while the radio searches for the new device, the message Searching ... appears. 46 Basic operation 4 Select Connect when the required headset appears in the list of new devices, then Yes to add the headset to My Headsets. New devices HM1100 Searching ,,, Add to My Headsets?

Cancel Connect No Yes The message Connecting appears, while the radio attempts to pair with the headset. Connecting:

HM1100 Clear 5 When the message Calling. Answer on headset appears, press the Answer button on the headset to confirm the connection. Calling. Answer on headset Headset connected Clear Cancel Clear 6 Repeat the previous steps to add other headsets. While the wireless headset is connected, the wireless headset icon appears in the display. Channel 12 Menu Managing your headsets Once a headset has been added to My Headsets, the Manage Headsets menu item appears under the Wireless Headsets menu. The Manage Headsets menu shows the headsets currently in My Headsets, along with the following information:

+ This headset is currently connected. a This headset will be automatically connected. Basic operation 47 c The radio will ask you for confirmation before connecting this headset. My Headsets BlueAnt T1V1. +a CSR-bc6 a Options Back Press Options to disconnect or connect a headset

(Disconnect, Connect), change the priority order of the headsets (Move down), or remove a headset from My Headsets (Remove, Remove all). My headsets Disconnect Move down My headsets Disconnect Move down Back Select Back Select Disconnecting the headset To disconnect the headset from your radio:

Press Menu and select Wireless headset >

Disconnect. Alternatively, in the My Headsets menu select Options > Disconnect. Reconnecting the headset Your radio may be programmed so that each time the headset is turned on, it will automatically reconnect to the radio. If the radio does not automatically reconnect to the headset:

1 On the radio, press Menu and select Wireless headset > Reconnect last. Wireless headset Connect Reconnect last Back Select 48 Basic operation The radio then prompts you to connect to the headsets in My Headsets, in priority order. Connect. HM1100?

No Yes No Connect BlueAnt T1 V1?

Yes 2 Select Yes to connect, or No to choose another headset. Changing the way your headset reconnects You can us the Power-on Option menu to change the way your radio reconnects with a headset when the radio is first turned on. The choices are:

None: The radio does not connect to any head-

sets, and you will need to manually connect or reconnect to your headset. Reconnect last: The radio connects to the previ-

ously connected headset. Connect: The radio will attempt to connect to the headsets in My Headsets, in priority order. To change the power-on option:

1 Press Menu and select Wireless headset >

Options > Power-on option, and change to the required option. Power-on option None Reconnect last Back Select Selecting a zone A zone is a collection of channels. Zones are a way of grouping channels, for example, by public safety agency type (fire, police, ambulance, etc.) or by geographical region (Dallas, Houston, etc.). To select a zone:

1 Press Menu and select Zones. Basic operation 49 2 Scroll to the zone you want. 3 Press Select. Your radio may indicate the zone in which it is currently operating in the following ways:

the name of the zone appears below the channel name in the default radio display, or the zone icon appears as a letter in the top right corner of the display. zone represented as one or two letters programmed zone name Channel 12 Zone 28 AB Menu Other ways of selecting a zone You may also be able to use the following controls to select a zone:

3-way selector (see "About the radio controls" on page 32) left selection key (see "Using the left selection key Quick Access menu" on page 41), or scroll keys (see "Using the scroll key Quick Access menu" on page 40). Selecting a channel Using the channel selector For channels 1 to 16, rotate the channel selector to the channel you want. For all other channels, use the Main menu to select a channel. Using the Main menu 1 Press Menu and select Channels. 2 Scroll to the channel you want and press Select. 50 Basic operation Using the keypad 1 Dial the number associated with the channel using the alphanumeric keypad. To delete a digit that you have dialed incorrectly, press Clear. 2 Press Select or # to confirm the channel change. The channel name associated with the new channel now appears in the default display. Other ways of selecting a channel You may also be able to use the following controls to select a channel:

function key (see "Accessing frequently used menus" on page 40) left selection key (see "Using the left selection key Quick Access menu" on page 41) scroll keys (see "Using the scroll key Quick Access menu" on page 40). Limiting call time Your radio may limit the amount of time you can talk

(transmit) continuously. This is known as the transmit timer or time-out timer and allows other radio users to make calls on that channel. The message Transmit Timeout Imminent appears in the display. Basic operation 51 Checking recent calls This feature is available for digital channels only and applies to individual calls and call alert pages only. Your radio may be able to store a list of the last 20 calls. These calls may be calls that you have received, calls that you have made, or calls that you have missed. To use your recent calls list to make a call:

1 Press Menu and select Recent calls. (Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select recent calls.) The most recent call is displayed at the top of the list. If you have not participated in any calls since your radio was switched on, the message No items in list appears in the display. 2 Scroll through the list of recent calls until the call you want appears, and then press Call. Recent calls Dispatcher Car 2 Cancel Call The message Call...? briefly appears in the screen. Press the PTT key to make the call. 3 Alternatively, scroll through the list of recent calls until the call you want appears, and press the PTT to make the call immediately. 52 Basic operation 5 Operating in conventional mode This section explains how to operate your radio in conventional mode. This includes how to make and receive calls, and use your radio in different repeater areas. This section covers:

Making calls Receiving calls Communicating directly with other radios Checking that the channel is clear Using the radio in different repeater areas Hearing faint and noisy signals Operating in conventional mode 53 Making calls To make a call:

1 Select the required zone (see "Selecting a zone"

on page 49). 2 Select the required channel (see "Selecting a channel" on page 50). 3 Hold the radio so that the microphone is about one inch (2.5 cm) from your mouth and press the PTT key to transmit. If the channel is busy, you may not be able to transmit. Wait until the status LED has stopped glowing green, and then try again. 4 Speak clearly into the microphone and release the PTT key when you have finished talking. While you are transmitting the LED glows red and appears in the display. Channel 1 Zone 11 Cancel Menu 5 Finish your conversation as soon as possible and release the PTT key. For a short time, your radio may prevent you from making a call. Making an individual call This feature is available for digital channels only. To make a call to one person rather than a group of people:

1 Press Menu and select Individual call. (The person to whom you last made an individual call is highlighted.)

(Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select individual calls.) 54 Operating in conventional mode 2 Scroll to the person you want to call and press the PTT key to make the call immediately. 3 Alternatively, scroll to the person you want to call and press Select. Individual call Car 2 Car 1 Cancel Select The message Call...? briefly appears in the display. Call...?

Car 2 Cancel Menu 4 Press the PTT key to make the call. Understanding talkgroups This feature is available for digital channels only. A talkgroup is a collection of radio users with whom you want to have private conversations. For example, a state's public safety agencies could have the following talkgroups:

Local talkgroupsused by a specific agency to communicate within their own local agency. It may even be made up of a county of public safety offi-

cers. Regional talkgroupsused by large state agen-

cies that have regional divisions. Statewide talkgroupsused by an agency to com-

municate with a public safety member in another region. Statewide talkgroups, as their name sug-

gests, enable public safety agencies to communi-

cate with each other from one end of the state to the other. Special event talkgroupsmay be used to man-

age emergencies encompassing a large area, or even events such as visits by heads of state. Operating in conventional mode 55 Making a talkgroup call To make a call to the currently selected talkgroup Press the PTT key. Changing a talkgroup 1 Press Menu and select Talkgroups.

(Depending on how your radio is programmed, you may be able to use a Quick Access menu to go to the Talkgroup menu.) 2 Scroll through the list of talkgroups to the one you want and press Select. Talkgroups Talkgroup01 Talkgroup02 Cancel Select 3 Press the PTT key to make a call to the currently selected talkgroup. Making an emergency call For information about making and ending emergency calls together with a explanation of how your radio behaves in emergency mode, see "About emergency calls" on page 103 and "Standard emergency mode"

on page 105. 56 Operating in conventional mode Receiving calls When a call is received with valid signaling, the radio unmutes and you can hear the call. Identifying a caller (talking party ID) This feature is available for digital channels only. You can use talking party ID to identify the radio user calling you. (This feature is usually turned on when the radio is programmed.) talkgroup call: the name of the talkgroup is dis-

played. individual call: the name of the radio name from your call list is displayed

(if there is no associated name, only the radio unit ID is shown). Car 2 Talkgroup01 Menu Call received Car 2 Menu Turning talking party ID off and on 1 Press Menu and select Radio settings > Display settings > Talk party ID. 2 Scroll to either On (or Off) and press Select.

(The current setting is highlighted). The message Talking party ID activated

(or deactivated) appears in the display. Talking party ID activated Operating in conventional mode 57 Receiving a two-tone call This feature is available for analog channels only. Two-tone signaling is used to call either individual or groups of radios. When your radio receives a two-tone call that it can decode, it beeps, indicating which type of two-tone call has been received. One long beep: a two-tone individual call has been received. Two medium beeps: a two-tone group call has been received. Three short beeps: a two-tone super group call has been received. A super-group call is addressed to all radios in the fleet. To accept the call, press the PTT key and begin speaking. Overriding two-tone signaling You can override two-tone signaling using a function key, if your radio is programmed in this way. Press the function key to override two-tone signal-

ing on a channel, and hear all two-tone calls. The message Ignore two-tone activated

(or deactivated) appears in the display. 58 Operating in conventional mode Communicating directly with other radios You can bypass the radio repeater and communicate directly with another radio using the radio talkaround feature. You can do this when you are out of range of the repeater, or if the repeater is busy. While repeater talkaround is active, all calls are made on your current channels receive frequency. Turning repeater talkaround on and off You can turn repeater talkaround on and off using a function key, if your radio is programmed in this way. Press the function key to turn repeater talkaround on. The message Talkaround activated

(or deactivated) appears and the display. Repeater talkaround remains on until you press the function key again. appears in Operating in conventional mode 59 Checking that the channel is clear Monitor allows you to override some or all of the radios mutes, allowing you to hear if there is any traffic (including talkgroup and individual calls) on a channel. For analog channels, this is so that you can check that the channel is clear before you make a call. Turning monitor on and off 1 Press Menu and select Radio settings >

Functions > Monitor.

(Depending on how your radio is programmed, you may be able to press a function key to toggle monitor on and off.) 2 Scroll to On (or Off) and press Select. While monitor is active, appears in the display. Using the radio in different repeater areas Your radio may have a group of channels programmed as a voting group. The channels in the voting group all carry the same traffic, but from different repeaters. As your radio moves in and out of different repeater coverage areas, the best communication channel is automatically selected for you to use. This channel is known as the home channel, and may be the channel you make and receive calls on. While voting is active, appears in the display. Vote 1 Menu 60 Operating in conventional mode Selecting a voting group Using the channel selector You can use the channel selector to select a preset voting group, if your radio is programmed in this way. Rotate the channel selector to the group you want. Using a function key To use a function key to select a voting group:

Press the function key to select and activate a preset voting or scan group. Using the Main menu To select a voting group using the Main menu:

1 Press Menu and select Channels. 2 Scroll to the group you want and press Select. Channels Vote 1 Channel 9 Back Select Suspending a channel from a voting group You may be able to use the function key programmed for nuisance delete to temporarily remove one of the channels from the voting group. To remove a channel from a voting group:

1 Wait until the radio has stopped on the channel that you want to remove from the voting group. 2 Press the function key programmed for nuisance delete. If the channel has been removed successfully, the message Channel nuisance deleted briefly appears in the display. Operating in conventional mode 61 Channel nuisance deleted The channel remains removed from the voting group until you either select another voting group or the radio is turned off and then on again. The function key programmed to activate a voting group may be programmed so that a short key press activates voting and a long key press activates nuisance delete. Hearing faint and noisy signals This feature is only applicable to analog channels. Usually the radios squelch mute (known as squelch) prevents you from hearing faint or noisy calls on a channel. Without squelch, the radios speaker would chatter in low signal strength areas. On occasions when you want to hear everything that is being said on a channel, even if it is hard to understand, you can use the squelch override feature to force the mute open. Turning squelch override on and off 1 Press Menu and select Radio settings >

Functions > Squelch override.

(Depending on how your radio is programmed, you may be able to press a function key to turn squelch override on and off.) 2 Scroll to On (or Off) and press Select. The message Squelch override activated

(or deactivated) appears in the display. Squelch override activated 62 Operating in conventional mode 6 Operating in P25 trunking mode This section explains how your radio operates on a P25 trunking system. This includes how to make group calls, individual calls and phone calls. This feature is controlled by a software license

(SFE) and may not be available with your radio. The features described in this chapter are only available for radios configured for P25 trunking operation. This section covers:

About P25 trunking Checking that the system is available Making a talkgroup call Receiving a talkgroup call Making an individual call Receiving an individual call Emergency calls Making a phone call Unconnected calls Failsoft mode operation Dynamic regrouping Operating in P25 trunking mode 63 About P25 trunking Your radio may be able to operate on a P25 trunking system as well as a conventional repeater-based system. On a conventional system, radio users compete for access to individual channels, and one channel can be overloaded with traffic while others are often unused. The trunking system allows several channels to be automatically shared by a number of radio users. These traffic channels are pooled and allocated, as required, for the duration of a call. As calls are completed, the traffic channels are returned to the pool, to be used for other calls. This system means reduced waiting times to make calls. Checking that the system is available When you first switch to a talkgroup configured for P25 trunking, the radio attempts to access the network and register on a control channel. If registration is successful, the trunking system available icon appears in the display. Talkgroup 1 Zone 11 Menu trunked system available icon talkgroup name zone or site name Registration is unsuccessful If registration is not successful, and the display shows No service. does not appear, Talkgroup 1 No service Menu The radio may sound five beeps, followed by a repeating double beep. The double beep continues until registration is successful. 64 Operating in P25 trunking mode Service is lost If access to the trunking system is lost, appears, the bars in the RSSI icon disappear the display shows No service. no longer

, and Talkgroup 1 No service Menu The radio sounds five beeps to indicate the loss of service, followed by a repeating double beep. The double beep continues until service is restored. Site trunking operation During normal trunking operation, your radio may roam between a number of sites, each with its own zone controller. This behavior is transparent to you, unless there is a problem with a zone controller. When this happens, the radio enters site trunking mode, and you will only be able to communicate with users within a single site. While in site trunking mode, the display shows Site Trunking, and the radio sounds a repeating double beep. The double beep continues until normal service is restored. Site Trunking Zone 11 Menu When access to the zone controller is available again, your radio automatically returns to normal multi-site operation. Failsoft operation Your radio may be programmed to enter failsoft mode when service is lost due to failure of a trunking site controller. For information about failsoft mode, see "Failsoft mode operation" on page 73. Operating in P25 trunking mode 65 Making a talkgroup call A talkgroup is a collection of radios on a trunking system. Trunked talkgroups are found in the Channels menu, along with conventional channels that may also be available for the currently selected zone. Depending on how your radio is programmed, you may be able to press a function key, use your Quick Access menu or use the channel selector to select a trunked talkgroup. Caution In some situations, your call will not proceed. For an explanation of the radio behavior, see

"Unconnected calls" on page 72. To make a talkgroup call on a trunking system:

1 Select the required zone:

Press Menu and select Zones. Scroll to the zone you want, and press Select. Zones Zone 2 Zone 3 Back Select

(Depending on how your radio is programmed, you may be able to press a function key, use your Quick Access menu or use the 3-way selector to select a zone.) Your radio now indicates the zone in which it is operating, either as a letter in the top right corner of the display, or as a zone name in the second line of the display. zone represented as one or two letters zone name Channel 1 Zone 2 B Menu 66 Operating in P25 trunking mode 2 Select the required talkgroup:

Press Menu and select Channels. Scroll to the talkgroup you want, and press Select. Channels Talkgroup 2 Channel 1 Back Select

(Depending on how your radio is programmed, you may be able to press a function key, use your Quick Access menu or use the channel selector to select a talkgroup.) Your radio now indicates the currently selected talkgroup. B Talkgroup 2 Zone 2 Menu talkgroup name 3 To call this talkgroup, hold the radio so that the microphone is about one inch (2.5 cm) from your mouth. 4 Press and hold the PTT key to transmit. 5 When you hear three short beeps, speak clearly into the microphone and release the PTT key when you have finished talking. While you are transmitting, the LED glows red and appears in the display. B Talkgroup 2 Zone 2 Menu Operating in P25 trunking mode 67 Receiving a talkgroup call To hear calls from other members of a talkgroup, your radio must have that talkgroup selected, or the talkgroup must be part of an active scan group. For information about selecting a talkgroup, see

"Making a talkgroup call" on page 66, and for information about talkgroup scanning, see "Activating talkgroup scanning" on page 80. When you receive a call from a talkgroup, the radio displays the name or the identity of the talkgroup, and that of the calling radio. B Car 1 Talkgroup 2 Cancel Menu calling radio talkgroup Press the PTT key to accept the call, or Cancel to reject the call. Making an individual call Caution In some situations, your call will not proceed. For an explanation of the radio behavior, see

"Unconnected calls" on page 72. To make a call to one radio on a trunking system:

1 Press Menu and select Individual call. (The person to whom you last made an individual call is highlighted.) Depending on your radio model and how it is programmed, you may be able to dial the identity of the radio you want to call, press a function key or use your Quick Access menu to select an individual call. 68 Operating in P25 trunking mode 2 Scroll to the person you want to call and press Select or press the PTT key. Individual call Car 2 Car 1 Cancel Select The message Calling... briefly appears. Calling... Car 2 Cancel Menu 3 When the called party accepts the call, you will hear three short beeps. 4 Press and hold the PTT key to transmit, speak clearly into the microphone, and release the PTT key when you have finished talking. Receiving an individual call When you receive a call from an individual radio, your radio displays the callers name or identity. Call received Car 1 Cancel Menu The radio rings until the call is answered. Press the PTT key to accept the call, or Cancel to reject the call. Operating in P25 trunking mode 69 Emergency calls In an emergency, you can summon help by sending an emergency call. When an emergency call is initiated, the radio enters emergency mode. For more information on emergency mode, see "Standard emergency mode" on page 105. Making an emergency call You can make an emergency call using the emergency function key (function key 1). Press the function or emergency key to activate emergency mode. The message Emergency mode appears and the radio sounds three short beeps, rising in pitch. Emergency mode Menu Receiving an emergency call When you receive an emergency call, your radio displays the callers name or identity and sounds a long beep. Emergency call Car 1 Menu 70 Operating in P25 trunking mode Making a phone call This feature is only available for radios with alphanumeric keys. You may be able to use your radio to connect to a telephone network and make a phone call. Caution In some situations, your call will not proceed. For an explanation of the radio behavior, see

"Unconnected calls" on page 72. To make a phone call on a trunking system:

1 Press Menu and select Phone call. (The phone call you last dialed appears in the display.)

(Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to open the Phone Call menu.) 2 Scroll to the number or person you want to call, or dial the required number using the alphanumeric keys. 123455 Cancel Select 3 Press Select or the PTT key. 4 Press and hold the PTT key to transmit. 5 When you hear three short beeps, speak clearly into the microphone and release the PTT key when you have finished talking. Operating in P25 trunking mode 71 Unconnected calls If your call is not connected, the way your radio behaves is explained in the following table. Radio behavior System queued Explanation The system is too busy to process your talkgroup or individual call. Busy channel now free The radio sounds three short beeps. Talkgroup 1 No service Menu The radio sounds five beeps, followed by a repeating double beep. The system is now available to process your talkgroup or individual call. You have selected a talkgroup that does not currently exist on the system. Your display shows that you have lost service and no longer appears. See "Service is lost" on page 65. No answer You have attempted to make an individual call to a radio that does not currently exist on the system. The radio sounds two short beeps. No answer The radio sounds two short beeps. You have attempted to make an individual or phone call, but you are not authorized to do this. Your individual or phone call has been rejected or is unanswered. 72 Operating in P25 trunking mode Failsoft mode operation If your radio is unable to access the trunking system, it may be programmed to enter failsoft mode. Failsoft mode operates in one of two ways: radio-based failsoft and infrastructure failsoft. Radio-based failsoft no When you lose access to the trunking system, longer appears, the bars in the RSSI icon disappear

, and the display shows No service. Talkgroup 1 No service Menu After a short time, your radio switches to a programmed conventional communications channel. Channel 1 Zone 11 Menu The radio remains on that channel until you select a trunked talkgroup with access to the trunking system. Infrastructure failsoft Your radio receives a message from the trunking infrastructure to say that the trunking system is now operating in failsoft mode. While in failsoft mode, the display shows Failsoft, and the radio sounds a repeating double beep. The double beep continues until normal service is restored. Failsoft Zone 11 Menu Operating in P25 trunking mode 73 You may still be able to communicate with your dispatcher and other talkgroup members, depending on the type of system failure that has occurred, and how your radio is programmed. When the trunking system returns to normal operation, your radio is notified, and will attempt to register on the control channel it was previously using. Dynamic regrouping The dynamic regrouping feature allows you to send a dynamic regrouping request to your dispatcher. Your dispatcher can then reassign your radio to a special communications group. Caution While you are operating on this group, normal channel selection may be disabled. To send a dynamic regrouping request:

Press Menu and select Trunking >

Dyn Regrouping. When you press Select, a message appears in the display. Sending dynamic regroup rqst Cancel If the request is successful, an acknowledgement message is displayed. Ack received OK 74 Operating in P25 trunking mode 7 Scanning This section explains the different types of scanning that may be available on your radio, and also how to view and edit scan group members. This section covers:

About scanning Activating standard scanning Activating background scanning Activating in-zone scanning Activating talkgroup scanning Making a call while scanning Suspending a channel from a scan group Editing a scan group Scanning 75 About scanning The scan feature is used to monitor groups of channels or talkgroups for activity of interest. This means that you are able to operate across multiple channels or talkgroups at the same time. For example, you may need to monitor your own conventional dispatch channel as well as other local area channels, such as a local sheriff and highway patrol channel. Members of a scan group may be conventional channels (P25 or analog), trunked talkgroups, and vote groups, depending of the type of scan group. When scanning is active, the radio searches through member channels for activity. If activity is found, the radio remains on that channel or talkgroup, so that you can hear the activity, and respond if necessary. Once the activity has finished, the radio begins searching again. Some channels or talkgroups, known as priority channels or talkgroups, are scanned more often that others in the scan group. Calls from priority channels or talkgroups take precedence over those from non-

priority group members. While the radio is scanning for activity, appears in the display. When the radio stops on a channel or talkgroup where there is activity, the or or icon flashes. Talkgroup 2 Zone 11 Menu 76 Scanning indicates that the channel or talkgroup is not a member of the scan group. indicates that the channel or talkgroup is a member of the scan group. The four types of scanning that may be available on your radio are:

standard scanning (P25 conventional and analog channels) background scanning (P25 conventional and ana-

log channels, and may include some voting groups) in-zone scanning (P25 conventional and analog channels, and P25 trunked talkgroups) talkgroup scanning (P25 trunked talkgroups, and may include some P25 conventional and analog channels,). For information about viewing and editing scan group membership, see "Editing a scan group"

on page 82 Activating standard scanning A standard scan group scans conventional channels

(P25 and analog) from across zones, and can also scan one or two voting groups. A standard scan group appears and behaves on the radio like a separate channel, and all standard scan groups are included in the channel list. Standard scanning is activated when you select a standard scan group. To select a standard scan group:

1 Press Menu and select Channels.

(Depending on how your radio is programmed, you may be able to press a function key or use the channel selector or Quick Access menu to select channels.) Scanning 77 2 Scroll to the group you want and press Select. Channels Scan 1 Channel 9 Back Select Activating background scanning A background scan group scans the group members, as well as the current channel selected on the radio. The group member channels can include conventional channels (P25 or analog) across zones, and can also include one or two voting groups. Background scanning provides more flexibility than standard scanning, as the radio user can select a current channel to operate on, while still monitoring permanent group members for activity. To turn background scanning on:

Press Menu and select Radio settings >

Functions > Scanning, or press the function key programmed for background scanning. Background scanning remains on until you either press the function key again, or select a standard, in-zone or talkgroup scan group. Changing the background scan group assigned to the function key 1 Press Menu and select Radio settings >

Functions > Set scan key. 2 Scroll through the list of background scan groups available and press Select. When you next turn on background scanning, this is the scan group that is activated. 78 Scanning Activating in-zone scanning An in-zone scan group scans the first 50 conventional channels (P25 or analog) or trunked talkgroups from the currently-selected zone. If you change zones, the radio stops scanning the previous zones channels and automatically starts scanning channels from the new zone. In-zone scanning is useful when scanning conventional channels and trunked talkgroups from within the selected zone, and zones are used to separate different geographic regions or work roles. As you change to a new region or role, you can change to another zone and the radio will automatically start scanning channels or talkgroups in the new zone, with no further action required. To turn in-zone scanning on:

Press Menu and select Radio settings >

Functions > Scanning, or press the function key programmed for in-zone scanning. In-zone scanning remains on until you either press the function key again, or select a standard, background or talkgroup scan group. Scanning 79 Activating talkgroup scanning Talkgroup scanning monitors calls from multiple trunked talkgroups, and up to five additional conventional channels (P25 or analog), from across zones. If conventional channels are included as group members, your radio will briefly leave the trunking control channel to scan these channels at regular intervals. Talkgroup scanning is useful if you need to operate across multiple trunked talkgroups. When talkgroup scanning is activated, the currently-selected talkgroup or channel is temporarily included in the scan group. If you change zones, the radio continues to monitor group members as well as the currently selected talkgroup or channel from the new zone. To turn talkgroup scanning on:

Press Menu and select Radio settings >

Functions > Scanning, or press the function key programmed for talkgroup scanning. Talkgroup scanning remains on until you either press the function key again, or select a standard, background or in-zone scan group. Making a call while scanning If you want to make a call while your radio is scanning:

1 Press the PTT key to transmit. icon is flashing, your radio calls the If the currently selected channel. If there has been no recent activity on the channel

(the icon is not flashing), then the channel that is called depends on the way your radio has been programmed. The possible options are:

your radio calls a predetermined channel e.g. your dispatcher 80 Scanning your radio calls the channel where activity was last detected your radio calls the last free channel. 2 When the called party responds, proceed with your conversation. Suspending a channel from a scan group If a group member is busy for a long time and you do not want to hear the conversation, you may be able to use the function key programmed for nuisance delete to temporarily delete the group member. When the scan group is next selected, or after the radio has been turned off and then on, the deleted member is again part of the scan group. To temporarily remove a captured group member from the scan group:

Press the function key programmed for nuisance delete. If the channel has been removed successfully, the message Channel nuisance deleted appears in the display. Channel nuisance deleted The function key programmed to activate scanning may be programmed so that a short key press activates scanning and a long key press activates nuisance delete. Scanning 81 Editing a scan group Selecting a group to edit 1 Press Menu and select Radio settings >

Functions > Advanced > Edit groups.

(Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select the Edit Groups menu.) The Edit Groups menu lists all the scan groups programmed for your radio, regardless of whether the groups are standard, background or in-zone scan groups. 2 Scroll to the group that you want to view or edit, press Select, and the Edit Group menu opens. Edit groups C:Group 1 D:Group 2 Back Select 3 In the Edit Group menu, select from the following options:

Group members: shows the current members of a group, and may also show the designated transmit channel and priority channels. Add or Delete channel: adds or deletes member channels of a group. Change tx channel: changes the groups transmit channel. Change P1 or P2: changes the groups first or second priority channel. 82 Scanning Icons and messages The following icons may appear when viewing group membership details, adding or deleting channels from a group, or changing a groups transmit or priority channels. Icon Meaning This channel is used to transmit on when there has been no recent activity. You cannot delete this channel (it will not appear under Delete channel). This channel is the groups first priority channel. You cannot delete this channel (it will not appear under Delete channel). This channel is the groups second priority channel. You cannot delete this channel (it will not appear under Delete channel). There is more than one instance of this channel in the group (the channel will be scanned more often). If you delete this channel, the radio will attempt to delete all instances of the channel. Viewing group membership 1 In the Edit Group menu, select Group members and press Select. Edit group Group members Add channel Back Select 2 Scroll through the list of group members. The names of the group members may be shortened. 3 The information that may appear is explained in the example below. zone Group members C:Channel 1 C:Channel 2 Back Select channel name transmit channel priority 1 channel Scanning 83 Adding a channel to a group 1 In the Edit Group menu, select Add channel and press Select. A list of channels that are not group members appears. 2 Select the channel you want to add and press OK. Add channel C:Channel 5 C:Channel 6 Back OK For all types of scanning except standard scanning, if your radio is programmed to use the scroll keys to scroll through a list of channels and also has a function key programmed to Nuisance Delete, you can permanently add or delete a channel to the active group by scrolling to the channel and pressing the Nuisance Delete function key. Deleting a channel from a group You cannot delete the priority 1 channel using the Delete Channel menu. 1 In the Edit Group menu, select Delete channel and press Select. A list of group members that are able to be deleted appears. 2 Select the channel you want to delete and press OK. Delete channel C:Channel 3 C:Channel 4 Back OK 84 Scanning For all types of scanning except standard scanning, if your radio is programmed to use the scroll keys to scroll through a list of channels and also has a function key programmed to Nuisance Delete, you can permanently add or delete a channel to the active group by scrolling to the channel and pressing the Nuisance Delete function key. Changing a groups transmit channel 1 In the Edit Group menu, select Change tx and press Select. The current transmit channel is identified by the icon beside the channel name. 2 Select the new transmit channel and press OK. Change tx C:Channel 1 C:Channel 2 Back OK Changing a groups first or second priority channel 1 In the Edit Group menu, select Change P1 or Change P2 and press Select. Change P1 C:Channel 1 C:Channel 2 Back OK 2 Select the new priority or priority 2 channel and press OK. Scanning 85 8 P25 services This section describes the P25 services that may be available on your radio. P25 services are only available for digital channels and some are restricted to conventional mode, and for radios configured for dispatcher operation. This feature is controlled by a software license

(SFE) and may not be available with your radio. This section covers:

Messages Status update Status request Call alert Radio check Radio unit monitor Radio inhibit and uninhibit 86 P25 services Messages You may be able to send short messages to another radio user. These messages are defined at programming time and are also known as pre-programmed messages. The person to whom you are sending the message must have the same message programmed into their radio in order to read and display your message. Sending a message You may be able to send your message to a predetermined person or to the dispatcher administering the current talkgroup, or to a person of your choice. Sending a message to a predetermined person or talkgroup administrator 1 Press Menu and select Services > Messages.

(Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select messages.) 2 Select the message you want from the message list. 3 Press Select. Messages En route At scene Cancel Select A message showing the destination appears in the display. Sending message to current group Cancel The LED glows red and a message may be displayed to advise you whether the message has been sent successfully or not. P25 services 87 Sending a message to a person of your choice 1 Press Menu and select Services > Messages.

(Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select messages.) 2 Select the message you want from the message list. 3 Press Select. Messages En route At scene Cancel Select 4 Select the message recipient from the list and press Send to. Send message Car 2 Car 3 Cancel Send to A message showing the destination briefly appears in the display. Sending message to Car 2 Cancel The LED glows red and a message may be displayed to advise you whether the message has been sent successfully or not. 88 P25 services Status update You can inform other radio users of your current status by sending them a status update, for example, At scene. You may be able to send the status update to a predetermined person or talkgroup, or to a person of your choice. When you send a status message, you are also setting your status, which the dispatcher may be able to check by interrogating your radio. You can change your status at any time by selecting another status message and sending it. See "Status request" on page 90. To send a status update:

1 Press Menu and select Services > Status update. (Depending on how your radio is programmed, you may be able to press a function key or use your Quick Access menu to select status update.) 2 Select the status message you want from the message list. 3 Press Send to or Select. Status update On site At lunch Cancel Select A message showing the destination appears in the display. Sending status to current group Cancel The LED glows red and a message may be displayed to advise you whether the status update has been sent successfully or not. P25 services 89 Status request This feature is only available for digital channels operating in conventional mode, and for radios configured for dispatcher operation. You can find out what another radio user is currently doing by asking them to send you a status update. To send a status request:

1 Press Menu and select Services > Status request. 2 Select the status request recipient from the list. 3 Press Send to. Status request Car 2 Car 3 Cancel Send to A message showing the destination appears in the display. Sending sts rqst to Car 2 Cancel The LED glows red and a message may be displayed to advise you whether the message has been sent successfully or not. 90 P25 services Call alert This feature only applies to individual calls. You can let another radio user know that you want to talk to them by sending them a call alert page. When the other radio user receives the call alert page, they can call you back when it is convenient. To send a call alert page:

1 Press Menu and select Services > Call alert. 2 Select the radio you want to page. 3 Press Send to. Call alert Richard John Cancel Send to A message appears in the display. Sending page to Richard Cancel The LED glows red and a message may be displayed to advise you whether the call alert has been sent successfully or not. If an acknowledgement is not received from the recipients radio, you may have the option of either cancelling or resending the call alert page. Answering a call alert page If you receive a call alert page from another radio user, the message Page rxd from... briefly appears in the display. Select Call to return the page or OK to delete it. If you miss the call alert page, the identity of the caller may be saved in your recent calls list. P25 services 91 Radio check This feature is only available for digital channels operating in conventional mode, and for radios configured for dispatcher operation. If you want to find out whether a particular radio is available on the system, you can use the radio check feature. This sends a radio check message to the radio unit you have specified. 1 Press Menu and select Services > Radio check. 2 Scroll to the radio you want to check. 3 Press Send to. Radio check Car 2 Car 3 Cancel Send to The LED glows red and a message showing the destination appears in the display. Sending radio chk to Car 2 Cancel If the radio is available on the system, an acknowledgement message is displayed. Ack received OK 92 P25 services Radio unit monitor This feature is controlled by a software license

(SFE) and may not be available with your radio. This software license is only required for the radio that sends the radio unit monitor request. The receiving radio does not need the software license. This feature is only available for digital channels operating in conventional mode, and for radios configured for dispatcher operation. The radio unit monitor feature can be used when you are concerned about the safety of a radio user on your system. When you send a radio-unit monitor request to a radio, it calls you back without giving any indication that it is making a call. You can hear any activity near the radio for up to 20 seconds. Sending a radio unit monitor request 1 Press Menu and select Services > Radio monitor. 2 Scroll to the radio you want to monitor. 3 Press Send to. Radio monitor Car 2 Car 3 Cancel Send to The LED glows red and a message appears in the display. Sending R.U.M to Car 2 Cancel P25 services 93 If the other radio has received your request, it will now call you, so that you can monitor activity near the radio. Call received Car 2 Menu Radio inhibit and uninhibit Warning When your radio is immobilized (inhibited), your encryption keys may be automatically deleted from your radio. This feature is only available for digital channels operating in conventional mode, and for radios configured for dispatcher operation. If you want to make another radio on the system inoperable, you can use the radio inhibit feature. This feature is also known as stun. To the user of the inhibited radio, it appears as though the radio has turned off. The radio remains inoperable even if it is turned off and then on again. The radio cannot return to operation until it receives an uninhibit request. This is also known as revive. Sending a radio inhibit request 1 Press Menu and select Services > Radio inhibit. 2 Scroll to the radio you wish to make inoperable. 3 Press Send to. Radio inhibit Car 2 Car 3 Cancel Send to 94 P25 services The LED glows red and a message appears in the display. Sending inhibit to Car 2 Cancel If the radio has been successfully immobilized, an acknowledgement message is displayed. Ack received OK Sending a radio uninhibit request 1 Press Menu and select Services > Radio uninhibit. 2 Scroll to the radio you wish to make operable. 3 Press Send to. Radio uninhibit Car 2 Car 3 Cancel Send to The LED glows red and a message appears in the display. Sending uninhibit to Car 2 Cancel If the radio has been successfully returned to operation, an acknowledgement message is displayed. Ack received OK P25 services 95 9 GPS location services This section explains how to use the GPS location services that may be available on your radio. This feature is controlled by a software license

(SFE) and may not be available with your radio. This section covers:

About GPS location information About GPS status information Viewing GPS information Sending GPS information Receiving and logging GPS information Accessing logged GPS information 96 GPS location services About GPS location information While you may be able to view your GPS location information on analogue channels, sending GPS information is only available for digital channels. If your radio is connected to a global positioning system (GPS) receiver, you can view GPS location information such as latitude and longitude, true course, speed, and coordinated universal time. Your radio can also display universal transverse mercator

(UTM) information such as the UTM zone, and northing and easting coordinates. You radio may also be set up to send or receive and log GPS information. About GPS status information In the GPS Info menu, GPS status information appears at the top right of the display. Zone: 55 Easting:

Northing:

Exit trk 321025 5812578 Send GPS status information The following GPS status information appears at the top right of the display. trk: the GPS receiver is displaying up-to-date sat-

ellite information. no cnx: the radio has lost serial communications with the GPS receiver. no fix: the GPS receiver is having trouble con-

necting to satellites and the radio is displaying stored information that may not be current. The Send option is a digital feature, and is only available on digital channels. GPS location services 97 Viewing GPS information 1 Press Menu and select Location Svs > GPS Info.

(Depending on how your radio is programmed, you may be able to press a function key to access the GPS Info menu.) GPS information is now shown in the display, if it is available. Zone: 55 Easting:

Northing:

Exit trk 321025 5812578 Send 2 Use and to view more GPS information. GPS Info trk GPS Info 3749'00.0"

Course:

trk 010"

Exit 14458'00.0"

Send Speed:

Exit 045km/h Send S E 3 Press Exit to exit the GPS display. GPS Info UTC time:

trk 02:07:33 Exit Send In certain situations, your radio may automatically exit the GPS display. Sending GPS information This feature is controlled by a software license

(SFE) and may not be available with your radio. To send GPS location information, you can:

press the PTT key, or use a function key. 98 GPS location services Using the PTT key When your radio is first turned on, GPS information is automatically sent each time you press the PTT key. This feature can be turned off using the Send On PTT menu. To turn Send on PTT off or on:

1 Press Menu and select Location Svs >

Send on PTT. Location Svs GPS Info GPS Logs Back Select 2 Scroll to Off (or On) and press Select. (The current setting is highlighted.) Send on PTT Off On Back Select Using a function key You may be able to use a function key to manually send your GPS location to either all radios on the channel, or to your dispatcher (depending on how your radio is programmed). 1 Press the function key programmed for GPS.

(Alternatively, press Menu and select Location Svs > GPS Info.) The current GPS location of the radio appears in the display. 2 Press Send. Zone: 55 Easting:

Northing:

Exit trk 321025 5812578 Send GPS location services 99 The message Location sent briefly appears in the display. Location sent Receiving and logging GPS information This feature is controlled by a software license

(SFE) and may not be available with your radio. When your radio receives GPS location information, the display shows Location, along with the digital alias of the sending radio. If the radio alias is not available, the radio ID appears. Location Car 1 Cancel View radio sending the location information The location information can then be viewed and logged. The most recent location details of up to 10 radios will be available, until the radio is turned off. You only receive a Location message from a radio that you have not previously logged. Updated information from a previously logged radio is automatically stored by your radio, without first being viewed. To display and log the received GPS location of a radio:

1 Press View. Location Car 1 Cancel View radio sending the location information The location information appears in the display. 100 GPS location services 2 Press Store to log the location information for that radio. Zone: 55 Easting:

Northing:

Cancel valid 321025 5812578 Store The message Logging... briefly appears in the display. Accessing logged GPS information This feature is controlled by a software license

(SFE) and may not be available with your radio. You can use the GPS Logs menu to display the latest GPS location information for a radio. To view a radios logged location information:

1 Press Menu and select Location Svs >

GPS logs. 2 Scroll to the radio you want and press Select. GPS logs Car 1 Car 2 Back Select The latest GPS location information available for that radio appears. Zone: 55 Easting:

Northing:

Back valid 321025 5812578 Delete 3 Press Delete to remove the location information for the radio, and stop logging it. GPS location services 101 10 Emergency operation This section describes how to make different types of emergency calls. This section covers:

About emergency calls Making a priority call Standard emergency mode About manual emergency operation Accessing emergency GPS location information Loneworker monitoring 102 Emergency operation About emergency calls Warning When emergency mode is activated, your encryption keys may be automatically deleted from your radio. In an emergency you can summon help by sending an emergency call. There are three types of emergency calls:

Call type Explanation Priority call

(Digital channels only.) An emergency alert is automatically sent to the current talkgroup. Calls made when the priority call feature is turned on are flagged as emergency calls. For further information see "Making a priority call" on page 104. Standard emergency call When an emergency call is initiated, the radio enters emergency mode. For further information see "Standard emergency mode" on page 105. Manual emergency call

(Digital channels only.) Emergency is activated and your radio sends an alert to your dispatcher and other members of your group, along with your radio digital alias and GPS location. For further information see

"About manual emergency operation" on page 106. Emergency operation 103 Making a priority call This feature is available for digital channels only. When you turn the priority call feature on, the radio automatically sends an emergency alert (message) to the current talkgroup. Any calls you make while the priority call feature is turned on are flagged as emergency calls. To turn the priority call feature on and off:

1 Press Menu and select Priority call.

(Depending on how your radio is programmed, you may be able to press a function key to turn priority call on and off.) 2 Scroll to On (or Off) and press Select. Priority call On Off Back Select 104 Emergency operation Standard emergency mode When you press the emergency key your radio enters emergency mode, if your radio is programmed in this way. When the radio enters emergency mode, it will automatically send alerts together with your radio unit ID to the dispatcher. These alerts are usually sent on a designated emergency channel. Warning The way your radio behaves in emergency mode depends on how your radio is programmed. For further information on what your radio may do in emergency mode, see "What happens during an emergency call?" on page 105. What happens during an emergency call?

The exact way your radio behaves when it enters emergency mode depends on how your radio is programmed. The main phases for emergency modes are summarized below. The length of each phase is determined when the radio is programmed. When the emergency key is pressed:

b c Digital channels: the radio continually sends emergency alerts to the dispatcher until a response is received. Details of your location may also be sent (if this feature is available for your radio). The radio alternately transmits and receives so the dispatcher can hear what is happening in the vicinity of your radio.

(Emergencies end once this phase is complete or when you end emergency mode.) Emergency operation 105 Activating emergency mode You can activate emergency mode using the emergency function key. 1 Long press the function or emergency key to activate emergency mode. Emergency mode appears in the display. Emergency mode One or more emergency calls are sent to your dispatcher or another predetermined radio user. During emergency mode, the radio will behave as described in "What happens during an emergency call?" on page 105. 2 Turn the radio off and on again to end emergency mode. The radio returns to normal operation. About manual emergency operation This feature is available for digital channels only. When you press the emergency key, your radio sends an alert to your dispatcher and other members of your group, along with your radio digital alias and GPS location. While the emergency call is active, the emergency information is sent out periodically, until either you or another member of your group end the emergency call. You are still able to make and receive voice calls while emergency information is being sent, but your radio does not display caller details. 106 Emergency operation Making a manual emergency call Warning You will not be able to make a voice call on the channel until the 3-second emergency alarm has finished. 1 Press and hold the emergency key for longer than three seconds. The radio gives three short beeps, rising in pitch. Emergency appears in the display, and remains until the manual emergency call is cancelled. Emergency Menu If you receive an acknowledgement from another radio in your group, the manual emergency call is cancelled, and the message Emergency Acked briefly appears in the display. This feature is controlled by a software license

(SFE) and may not be available with your radio. Emergency Acked NWME42T1 alias of acknowledging radio Emergency operation 107 Receiving a manual emergency call When your radio receives a manual emergency call, Emergency appears in the display, along with the identity of the radio that initiated the emergency call. Emergency NWBE22M1 Location Menu location information available radio in emergency A loud repeating emergency alarm sounds for three seconds. If location information has been sent, Location appears in the display. Cancelling a manual emergency call If the emergency situation has been resolved, the manual emergency call can be cancelled either by you or another member of your group. Cancelling an emergency call you have made Press and hold the emergency key for longer than three seconds. The message Emergency cancelled appears in the display. Emergency cancelled Your radio now returns to the channel that it was operating on prior to the emergency call. 108 Emergency operation Cancelling a manual emergency call you have received When you have received a duress emergency call, the Emergency menu always moves to the top of the menu list. In the Emergency Menu, you can manually acknowledge the duress emergency call. This acknowledgement cancels the call. 1 Press Menu and select Emergency > Acknowledge. Emergency Acknowledge Last stored Back Select The name of the radio that initiated the emergency call appears in the display. Acknowlegement NWBE22M1 Back Send 2 Press Send to cancel the manual emergency call from that number. The message Emergency Ack Sent briefly appears in the display. Emergency Ack Sent Emergency operation 109 Accessing emergency GPS location information If Location appears in the display, above the left selection key, you can display the current GPS location of the radio that has sent a manual emergency call. The last location of the radio will still be available even if the radio is turned off and then on again. To access the location information, either press Location or use the Last Stored menu. Using the Location menu 1 Press Location to display the current GPS location of the radio. Emergency NWBE22M1 Location Menu 2 Use the scroll keys to view more GPS information. Zone: 55 valid Emergency valid Easting:

321025 Northing: 5812578 S E 3749'00.0"

14458'00.0"

Exit Menu Exit Menu 3 Press Exit to return to the previous display. Emergency valid UTC time: 02:07:33 Exit Menu 110 Emergency operation Using the Last stored menu 1 Press Menu and select Emergency > Last stored to display the current GPS location of the radio. Emergency Last stored Acknowledge Back Select 2 Use the scroll keys to view more GPS information. Zone: 55 valid Stored valid Easting:

321025 Northing: 5812578 S E 3749'00.0"

14458'00.0"

Exit Menu Exit Menu 3 Press Exit to return to the previous display. Loneworker monitoring Loneworker monitoring is a safety feature for people who work alone. Loneworker monitoring may be programmed to be on or off at all times, or can be switched on and off by the user using a programmed function key or the menu. A loneworker alarm is activated if for a predetermined period of time:

the radio has been tilted by more than 60 degrees

(man down) the radio has not moved there has been no user activity Your radio may be programmed to respond to a combination of these events. When the predetermined time has expired, an audible warning is given and you have a predetermined time to respond to the loneworker situation. If you are unable to respond, the radio either enters emergency mode or (in trunked mode) sends a status update to a predetermined person or talkgroup. Emergency operation 111 Activating loneworker monitoring 1 Select Menu > Radio Settings > Extra features >

Loneworker. (Depending on how your radio is programmed, you may be able to press a function key to turn loneworker monitoring on and off.) Extra features Loneworker Back Select 2 In the Loneworker menu, choose On. A vertical scroll bar on the right-hand side of the display indicates the remaining activity timeout. Channel 12 Zone 11 Menu remaining activity timeout Responding to a loneworker alarm You hear a beep indicating that the radio is expecting a response from you to acknowledge that you are safe. The message Loneworker awaiting and a horizontal scroll bar appear indicating the remaining time until an emergency action is triggered. Loneworker awaiting Press any key If using the man down feature, restore the radio to an upright position. Otherwise the radio will activate emergency mode or

(in trunked mode) send a status update. 112 Emergency operation Delaying the emergency action

(conventional mode only) In conventional mode, an additional emergency entry delay may be programmed which allows you to press a scroll key within a programmed time (usually 10 seconds) after the response time expires to delay the emergency action. Channel 12 Zone 11 Menu emergency entry delay timeout You now have the opportunity to turn the radio off and one to cancel the loneworker alarm. The emergency action can be delayed only once. Emergency operation 113 11 Encryption This section describes how to use encryption to make your communications completely private. This feature is controlled by a software license

(SFE) and may not be available with your radio. This section covers:

About encryption Encrypting calls Making an encrypted call Receiving an encrypted call Changing the radios encryption key Removing encryption keys from the radio Updating encryption keys over-the-air Using an encryption demonstration key 114 Encryption About encryption The encryption feature is available for digital and dual-mode channels only. To make communications with other users on your system completely private, your radio may be able to encrypt outgoing calls, using a confidential encryption key. The radio receiving your call must have the same encryption key installed before it can hear your encrypted call. About the proper key detect feature Your radio may be programmed with proper key detect. This means that you can only hear an encrypted call if the key used to encrypt the incoming call matches the key used to encrypt your outgoing calls on that channel. Note that encryption does not need to be turned on for the radio to unmute. For example, you are encrypting your outgoing calls using encryption key 7. Although key 1 and key 2 are also stored in your radio, your radio has been programmed so that it will only unmute for incoming calls encrypted using key 7. Encrypting calls Your radio may be able to turn encryption on and off. While encryption is on, your outgoing calls are encrypted on channels programmed for encryption, and the encryption icon This setting only affects outgoing calls. Incoming calls will still be decoded by your radio so long as the key required to decode the call is stored in your radio. remains in the display. Encryption 115 To turn encryption on or off:

1 Press Menu and select Security > Encryption.

(Depending on how your radio is programmed, you may be able to press a function key to turn encryption on and off.) 2 Scroll to On (or Off) and press Select. Encryption On Off Back Select The message Encryption activated

(or deactivated) appears in the display. Using the 3-way selector To turn encryption on and off using the 3-way selector:

1 Rotate the 3-way selector to either position A or B to turn encryption on. The message Encryption activated briefly appears in the display. 2 Rotate the 3-way selector to position C to turn encryption off. The message Encryption deactivated briefly appears in the display. Making an encrypted call 1 Select the channel or group you wish to call. 2 Check that encryption is on (

is showing in the display). 3 Press and hold the PTT key to transmit. 116 Encryption The name of the encryption key that your radio is using for the transmission may briefly appear in the display. Channel 8 Key 7 Menu While you are transmitting, the LED glows red and appears in the display. Receiving an encrypted call When you receive an encrypted call, your radio unmutes and you can hear clear speech, so long as the key required to decode the call is stored in your radio. The name of the encryption key used to encrypt the incoming call may briefly appear in the display, below the name of the caller. Channel 7 Key 2 Menu If the key required to decode the call is not stored in your radio, then your radio remains muted. Your radio may also remain muted if the currently selected channel has proper key detect programmed. Changing the radios encryption key You may be able to use the Change All menu to change the encryption key that encrypts your outgoing calls. You can then use the Preset Keys menu to change the encryption keys back to the default encryption key for each channel. Encryption 117 Warning Once you change the encryption key, it may also automatically update the encryption keys used to encrypt calls on other channels. Changing the transmit encryption key 1 Press Menu and select Security > Change all. 2 Scroll to the key you want and press Select. Change all Key 2 Key 1 Back Select The message Global key selected briefly appears in the display. Changing the transmit encryption key back to the default setting 1 Press Menu and select Security > Preset keys. Security Preset keys Change all Back Select The message Select preset keys? appears in the display. 2 Press OK and the message Preset keys selected briefly appears in the display. Changing the encryption keyset It may be possible for you to change the encryption data associated with the encryption keys loaded in your radio. 1 Press Menu and select Security > Change keyset. 118 Encryption 2 Scroll to 01 or 02 and press Select. Change keyset 01 02 Cancel Select The message Keyset selected briefly appears in the display. Removing encryption keys from the radio It may be possible for you to delete encryption keys from your radio. Warning When emergency mode is activated, or when your radio is immobilized (inhibited), your encryption keys may be automatically deleted from your radio. Deleting an encryption key 1 Press Menu and select Security > Advanced >

Zeroize key. 2 Scroll to the key you want and press Select. The message Single key zeroized briefly appears in the display. Deleting all encryption keys 1 Press Menu and select Security > Advanced >

Zeroize all. The message Zeroize all keys? appears in the display. 2 Press OK and the message All keys zeroized no longer briefly appears in the display and appears. Encryption 119 Updating encryption keys over-the-air You may be able to update your encryption keys using over-the-air-rekeying (OTAR). This feature is controlled by a software license

(SFE) and may not be available with your radio. This feature is only available for digital channels operating in conventional mode. Press Menu and select Security > Rekey request. The message Rekey request ack appears in the display. If there is no response to the rekey request, the message Rekey request timeout appears. Using an encryption demonstration key Your radio may be programmed with an encryption demo key. The demo key is used to demonstrate the way encryption operates, without the need to load secure encryption keys into the radio. Activating the demo key 1 Press Menu and select Security > Advanced >

Demo key. 2 Scroll to Enable and press Select. Demo key Enable Disable Back Select The message Demo key activated appears in the display. 120 Encryption Making an encrypted call using the demo key To encrypt your transmissions using the demo key:

1 Activate the demo key on your radio. 2 Turn on encryption. See "Encrypting calls" on page 115. 3 Make the call. See "Making an encrypted call" on page 116. Receiving an encrypted call using the demo key Once the demo key is activated on your radio, the radio unmutes when you receive a call encrypted using the demo key, and you can hear clear speech. The identity of the caller appears in the display, along with the encryption key name. Channel 7 Demo key Menu Note that you do not need to have encryption turned on to be able to hear an encrypted call. Encryption 121 12 Customizing radio settings This section describes the ways in which you can customize your radio. This section covers:

Extending battery life on a shift Changing the volume of all audible indicators Changing the volume of keypress tones Changing to quiet operation Changing to silent operation Turning on backlighting 122 Customizing radio settings Extending battery life on a shift You can reduce the power consumption of your radio

(and thereby extend the life of the battery during a shift) in the following ways:

Transmit at low power (if your radio is not already configured to do this). Ensure that backlighting automatically turns off when no radio activity is detected (see "Turning on backlighting" on page 126). Turning low power transmit on or off If you are using your radio in conditions where signal strength is high, you can extend the shift life of your battery by transmitting at low power. When low power transmit is turned on, the display and calls are made at low power rather than at the programmed power setting. To turn low power transmit on or off for all channels:

1 Press Menu and select Radio settings >

appears in Functions > Low power tx.

(Depending on how your radio is programmed, you may be able to press a function key to turn low power transmit on or off.) 2 Scroll to On (or Off) and press Select. (The current setting is highlighted.) Low power tx Off On Back Select The message Low power tx activated

(or deactivated) appears in the display. Customizing radio settings 123 Changing the volume of all audible indicators You can set the volume of all the audible indicators to either high or low. Audible tones include incoming call tones, warning tones and confirmation tones. To change the volume of your radios audible tones:

1 Select Menu > Radio settings >

Alert settings > Indicator level. Alert settings Indicator level Keypress tones Back Select

(Depending on how your radio is programmed, you may be able to press a function key to change the level of indicators.) 2 Scroll to High (or Low) and press Select. Changing the volume of keypress tones Whenever you press the radio keys, the keypress tones give you an audible indication as to whether or not your action is allowed. A short, medium-pitched beep indicates that an action is allowed. A long, low-

pitched beep indicates that the action is not allowed. To change the volume of your radios keypress tones:

1 Select Menu > Radio settings >

Alert settings > Keypress tones. Alert settings Keypress tones Quiet operation Back Select 2 Scroll to either Off, Low or High and press Select. 124 Customizing radio settings Changing to quiet operation When quiet operation is on, keypress tones and confirmation tones are turned off. Incoming call tones, signaling tones and warning tones all remain audible. To turn quiet operation on or off:

1 Select Menu > Radio settings >

Alert settings > Quiet operation. Alert settings Quiet operation Silent operation Select Back

(Depending on how your radio is programmed, you may be able to press a function key to toggle quite operation on and off.) 2 Scroll to On (or Off) and press Select. Changing to silent operation When silent operation is on, all the radios audible tones are turned off, and only channel traffic can be heard. To turn silent operation on or off:

1 Select Menu > Radio settings >

Alert settings > Silent operation. Alert settings Silent operation External alert Back Select 2 In the Silent Operation menu, scroll to either On or Off and press Select.

(Depending on how your radio is programmed, you may be able to press a function key to toggle silent operation on and off.) While silent operation in on, the the display. icon appears in Customizing radio settings 125 Turning on backlighting Whenever a key is pressed or a call is received, the keypad and display light up automatically. Backlighting only remains on for a few seconds, unless there is further radio activity. When backlighting is turned on, it remains on until the setting is changed to Off, regardless of radio activity. To turn backlighting on or off:

1 Select Menu > Radio settings >

Display settings > Backlighting. Display settings Backlighting Contrast adjust Back Select

(Depending on how your radio is programmed, you may be able to press a function key to toggle backlighting on and off.) 2 Scroll to either On or Off and press Select. Turning backlighting on momentarily You may be able to use a programmed function key to turn backlighting on momentarily. Press the assigned function key to turn backlight-

ing on. Backlighting remains on for a few seconds, and then turns off. Alternatively, the function key may be programmed so that:

a short key press turns backlighting on momen-

tarily, and a long key press turns backlighting on, and it remains on until there is a further long key press. 1 126 Customizing radio settings Adjusting the display contrast To change the contrast of your radio display to suit the lighting conditions that you are working in:

1 Select Menu > Radio settings >

Display settings > Contrast adjust. Display settings Contrast adjust RSSI Back Select 2 Use the scroll keys to adjust the display contrast to the level you want. Use scroll keys to adjust Cancel Save 3 Press Save to save this setting. Customizing radio settings 127 13 Charging and caring for batteries This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life. This section covers:

About the chargers Before using the charger Charging the battery Maintaining battery life and performance Storing batteries Disposing of batteries 128 Charging and caring for batteries About the chargers Unless otherwise indicated, the charging advice and instructions in this chapter apply to all chargers. There are three types of charger available for your Tait radio battery:

Desktop charger: Small enough to fit on a desk, it charges one bat-

tery at a time. Multicharger:

Charges up to six batteries. It can be mounted on a desk, on a wall, or in an equipment rack. Warning The multi-charger must be connected to an earthed mains socket-outlet. Vehicle charger: Charges one battery at a time while installed in a vehicle. Before using the charger Handle the battery safely Warning Handle the battery safely. Failure to observe the following handling recommendations could result in personal injury and/or equipment damage. Before using a Li-ion battery, please read the Li-ion Battery Safety Information (MPC-00006-xx) Charging and caring for batteries 129 included with your battery, and follow the instruc-

tions it provides. Incorrect use of a Li-ion battery can cause explosion or fire. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-

circuiting the battery contacts can heat up the con-

ductive material. Attaching of labels Warning Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed the battery may explode, causing personal injury and/ or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. For detailed information about attaching labels safely, see Attaching labels to the radio or battery on page 25. Charging temperatures Notice Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (service life) of the battery. To achieve the best results when charging your battery:

Before you begin to charge your battery, make sure that the battery temperature is close to the room temperature in which the battery is to be charged. 130 Charging and caring for batteries If possible, charge the battery in temperatures between 50 F and 77 F (between 10 C and 25 C). This temperature range is the opti-

mal charging range. Charging only starts when the battery is between 32 F to 104 F (0 C to 40 C). 77 F 25 C 50 F 10 C Temperature indications When the battery temperature is outside the normal charging range, the orange LED on the charger is lit. Charging will start or resume once the temperature is within normal limits, and no action is required by you. Leaving the battery on charge You can leave a battery/radio in the charger once charging is complete. Leaving a battery in the charger will not overcharge or damage it. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. Vehicle charger only It is safe to switch off the ignition while there is still a battery in the charger. However, if the vehicle will not be used again for some time, check whether charging will continue while the ignition is off, and consider what effect this might have on the vehicle battery. To check, place the battery in the charger, and switch off the vehicle ignition:

If no charger LED stays lit, the charger will resume charging only when the ignition is switched on again. Minimal charger standby power will be drawn from the vehicle battery until then. If a charger LED stays lit, the charger will continue to charge the radio battery even while the ignition Charging and caring for batteries 131 is off, and will continue to draw power from the vehicle battery. Once the battery is charged, the charger draws minimal current and has little effect on a healthy vehicle battery. Receiving calls while charging Applies to desktop charger and multicharger only. Notice For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded. If you do remove the radio from the charger to answer a call, the call will not be disrupted. Removing the radio from the charger to make or receive a call ends the charging process. Charging safely recommences when the radio is reinserted into the charger. If a radio was turned on while being charged, the battery indicator may not be accurate when the radio is initially removed from the charger. After a few seconds, the battery indicator is updated to display the amount of charge available in the battery. Low battery warning Notice Do not allow a radio battery to fully discharge every time you use it, or you will shorten the service life of the battery. When the battery is low, your radio warns you in the following ways:

The battery icon empty. on the radio display looks The status LED on the radio slowly flashes red. A high-pitched beep sounds. 132 Charging and caring for batteries You should recharge or replace the battery as soon as possible. When the battery is completely empty, the message Battery is flat appears on the display. The radio emits a long, low-pitched beep and then stops working. Turn off the radio immediately. Charging the battery Fully charge a battery before using it for the first time. This will take up to 2.5 hours. The red LED stays lit while the battery charges. To charge the battery:

1 Desktop charger: Connect the charger to the correct Tait power adaptor. Multicharger and vehicle charger: Power on the charger. Initially, all three LEDs are lit for two seconds. 2 Place just a battery in the charger, or a radio with a battery attached (desktop charger or multicharger only). There is no need to remove a belt clip, antenna, or any accessory that is attached to the accessory connector. The red LED lights up, and stays lit while the battery charges. For a battery that is almost completely discharged, allow two hours. When charging is complete, the green LED stays lit. Charging and caring for batteries 133 LED behavior If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows:

LED briefly steady steady steady Meaning The charger has been connected to a power supply. The battery is charging. Charging complete. Remove the battery, or leave it in the charger. The battery temperature is outside the normal charging range. Charging will start or resume once the temperature is within normal limits. No action is required. There is a fault. Contact your local regional Tait office. all off There is a fault. Contact your local regional Tait office. If the charger does not behave as expected:

Make sure the radio or battery is seated properly in the charger. Check that the charger is properly plugged in. Check that the battery and charger contacts are clean. To clean, wipe the contacts with a dry lint-

free cloth to remove any dirt, oil or grease. Removing the battery from the charger Desktop charger and multicharger: Lift the battery/

radio out of the charger. Vehicle charger: Pull the release bar up, and then lift out the battery. 134 Charging and caring for batteries You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. Maintaining battery life and performance With proper care and maintenance you will maintain the performance and life of the battery. It is recommended that you:

Use only Tait batteries and chargers. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the service life of the battery. Very high: above 140 F (60 C) Very low: less than 22 F (30 C) Charge the battery at a room temperature of between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Store batteries properly when not in use. See Storing batteries on page 136. Cleaning the contacts of the battery Notice Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. Charging and caring for batteries 135 Storing batteries When not in use for a month or more, batteries should be stored correctly to prolong their life. Remove the battery from the radio before storage. Fully charge the battery if storing for less than one month. Charge the battery to about 30% if storing for lon-

ger than one month. Store the battery in a cool dry place. Using batteries after storage Batteries that have been stored for any length of time must be charged before being used. See Charging the battery on page 133. Disposing of batteries Run the battery flat before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner. Please contact your radio provider for information on recycling programs in your area. See Environmental responsibilities on page 9 for more information. 136 Charging and caring for batteries 14 Troubleshooting This section describes troubleshooting procedures, and basic maintenance. This section covers:

About troubleshooting System error message When your radio wont turn on Identifying the radios audible tones Viewing radio information Changing the radio ID Running diagnostics tests General care Troubleshooting 137 About troubleshooting If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. System error message If your radio displays a system error message, take a note of the number (X:XXXXXXXX), and consult your radio provider. System error X:XXXXXXXX When your radio wont turn on If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio. Check the following:

Is the battery firmly attached to the radio?

Is the battery sufficiently charged?

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate properly, contact your radio provider for further assistance. 138 Troubleshooting Identifying the radios audible tones The radios audible tones can help you identify a potential problem:

Audible tone Meaning One short, high-pitched beep Two short beeps Two low-

pitched beeps Two high-

pitched beeps The radio has been made inoperable (stunned or inhibited) by your service provider. The radio has been made operable (revived or uninhibited) by your service provider. The radios temperature is high. (The radio will continue to operate.) The radios temperature is in the very high range;

all calls will now be at low power. If the radios temperature rises above this range, calls will be inhibited. Turn off the radio and allow it to cool down. Radio system error: a system error has occurred and the radio may be inoperable. Contact your radio provider. Continuous low-pitched tone Viewing radio information Your radio provider may ask you for the hardware and firmware version of your radio, for troubleshooting purposes. Use the Radio info menu to view information such as the hardware and firmware version of your radio, function key settings, the radio serial number, and various radio identities. 1 Press Menu and select Radio settings > Radio info. 2 Scroll to the version information you want to view and press Select. Troubleshooting 139 Checking the version of your radio using the PTT key 1 Turn off the radio. 2 Hold down the PTT key and turn on the radio. The firmware and hardware versions, and your radios frequency band is briefly displayed. Changing the radio ID You can change the radio ID if the current ID is not correct. To change the radio ID your radio must have alphanumeric keys. 1 Press Menu and select Radio settings > Radio info > Radio ID. 2 Press the right selection key. 3 If Enter PIN appears in the display, enter the correct sequence of keys (known as the technician access PIN). 4 Press Clear to delete the current ID, and use a combination of the scroll keys and alphanumeric keys to enter a new ID. 5 Press Options > Store to save the new ID. Running diagnostics tests Diagnostics tests are available via the main menu. This feature is controlled by a software license

(SFE) and may not be available with your radio. 1 Press Menu and select Diagnostics. 2 Scroll to the name of the test you want to run and press Select. 140 Troubleshooting The following table lists diagnostics tests you may find on your radio. Notice The radio may transmit when you select some tests. Make sure you have a suitable load or antenna connected before running diagnostics tests. Test Audio loopback test Display freq GPS NMEA data Keypad test QoS RSSI Rx 1011 or RX1031 Site display Site measure Tone test Description Routes audio from an external accessory microphone to the radio's internal speaker. Before running this test, turn the volume down to limit interference and reduce the impact of audio artefacts. Displays the transmit and receive frequencies of the current channel. If the radio is scanning this information may not be available. Displays the last raw data received from the radios internal GPS. The radio will display all supported sentence formats received (for example $GPRMC and $GPGGA sentences). Note that the display will not automatically refresh when new data is received. Sounds an audible tone when a key is pressed or released on the radio, or the 16-way and 3-way selectors are moved. The radio also displays the key or selector name along with pressed or released or the new selector position. Displays information about the quality of service

(received signal strength (RSSI) with an indication of digital voice quality). Displays the received signal strength (RSSI) of the current channel. Receives a 1031 Hz or 1011 Hz tone and displays the received signal strength (RSSI) and the bit error rate (BER) of the received signal. Shows the channel number, signal strength and system-identity code (SYSCODE) for the currently registered trunked site. Lists the current trunked site (indicated with an asterisk) and up to six detected adjacent sites, with received signal strength (RSSI) information. Generates an audible tone for the duration of the test. Troubleshooting 141 Test Tx 1011 Tx 1011 Cal Description Transmits a tone of 1011 Hz on the current P25 channel. Transmits a 1011 Hz tone on the current channel with a bit error rate (BER) of 5%. Tx power test Displays hardware-related information while the radio is transmitting. Information includes the final PA current (in mA) General care Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. Notice To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleum-

based products. For general battery care, see "Maintaining battery life and performance" on page 135. Cleaning the contacts of the battery Notice Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. Cleaning the radio If you need to clean the radio case, use a cloth dampened with clean water. 142 Troubleshooting 15 Glossary A APCO C channel control channel conventiona l operation F failsoft The Association of Public Safety Communications Officials. The APCO Project 25 standards committee (http://www.apcointl.org/) defined a digital radio standard. The standard is often referred to as APCO or P25. In a conventional system, a channel is a pair of frequencies used to transmit and receive radio signals. In a P25 trunking system, a channel is a group of radio users. In a P25 trunking system, the control channel is used by the trunking site to let the radio units in the sites coverage area know when they can transmit their call information. In conventional operation, the radio is tuned to a programmed channel, and communicates with other radios either on that channel, or through a repeater system. Failsoft operation offers P25 conventional operation if the radio cannot acquire a control channel on a trunking system for an extended period of time. The conventional channel may be a repeater channel or a direct channel. Glossary 143 Federal Communications Commission, an independent United States government agency that regulates interstate and international radio communications. Light Emitting Diode, a device that is able to emit light. A mute controls the circumstances under which a received signal is passed to the radios speaker. For example, when a signal is received by the radio, the mute may remain closed if the signal is not strong enough, does not have valid signaling or is encrypted. Project 25. The Association of Public Safety Communications Officials

(APCO) established Project 25 (P25). This project was led by United States Federal, state, and local government representatives to develop standards for interoperable digital radios and systems to meet the needs of public safety users. See http://

www.project25.org for further information. FCC L LED M mute P P25 144 Glossary R repeater RF RSSI T traffic channel trunking operation A repeater is a relaying site, usually situated above a city or town. The repeater extends the range of radio communications by receiving and re-

transmitting signals received from radios. Radio Frequency, the part of the electromagnetic spectrum that is suitable for radio transmissions. The frequency of the RF signal is described in terms of the number of cycles per second or Hertz (Hz). Received Signal Strength Indicator, an icon or number that shows the strength of a received signal. The traffic channel is the channel on a trunking system to which the parties participating in a call are directed to for the duration of the call. When the call ends, the traffic channel is returned to the pool of channels for use in a new call. In trunking operation, the trunking system manages the communications channels used by the radio, and shares a number of channels among a large number of radio users. Glossary 145 V valid signal A valid signal is a signal that the radio responds to by unmuting the receiver. A signal may be valid, for example, when it is stronger than a minimum level or has special signaling that matches the signaling programmed for the receiving radio. 146 Glossary Index A alert tones 37 see also audible tones alias 106 antenna 11 see also digital radio ID safe distance from face audible tones 37 troubleshooting 139 types of 37 B background scan activating 78 changing group membership 75 battery extending shift life 123 indicator 35 using after storing 136 bypassing repeater 59 C call alert page 91 caller, identifying 57 calls bypassing repeater 59 checking missed calls 52 identifying caller 57 making 54 permitted length of 51 priority call 104 receiving 57 to talkgroup

(conventional) 56 two-tone 58 channel checking that clear

(monitor) 60 home channel 60 removing from scan group 81 voting 60 priority 76 50, 61 channel (conventional) channel selector control compliance information 10 control channel registration 64, 74 conventional operation individual calls 54 talkgroups 55 D deleting nuisance channels from groups 81 demo key 120 digital alias 106 dispatcher operation radio uninhibit 94 status request 90, 92, 93, 94 display contrast 127 icons 34 distance, recommended safe from radio 11 distress beacons, frequency band Index 147 reserved for 15 documentation, related 22 dynamic regrouping 74 E emergency call ending 106 types of 103 what happens during 105 emergency mode turning off 106 understanding 105 encryption change keyset 118 changing keys 117 demo key 120 over-the-air-rekeying 120 proper key detect 115 receiving an encrypted call 117 remove key 119 turning on and off 116 turning on and off using the 3-way selector 116 error messages 138 exposure, to RF 10 F failsoft mode 65, 73 firmware version 139 frequency band, reserved for distress beacons 15 function key settings 38 G GPS information 148 Index about 97 deleting 101 GPS key 99 logging 100 Send on PTT 99 sending 98 viewing 98 GPS location 106 green LED 36 group scanning groups 76 talkgroups 55 voting groups 60 H hardware version 139 I identifying caller 57 incoming call tone. See audible tones individual calls

(conventional) 54 individual calls (trunking) 68 infrastructure failsoft 73 invalid keypress beep 37 in-zone scan activating 79 changing group membership 75 K keep alive ending 106 key press long and short, explained 32 keypress invalid 37 tones. See audible tones. L lighting conditions adjust display for 127 lone worker feature 111 long key press 32 low power transmissions turning on and off 123 M Main menu accessing 39 exiting quickly 39 making calls 54 individual call 54 talkgroup call

(conventional) 56 see also Calls manual emergency about 106 making a call 107 manuals, related 22 menus accessing 39 quick access 40, 41 messages pre-programmed 87 sending 87 missed calls, checking 52 monitor 60 radio display icon for 34 turning on and off 60 N nuisance delete scan groups 81 voting groups 61 O OTAR 120 P P25 trunking. See trunking operation. 64 paging a radio 91 phone calls (trunking) 71 power consumption 123 power up radio 43 priority call 104 priority scanning 76 protective power-down 43 Q quick access menus 40, 41 R radio controls 32 not turning on 138 recommended safe distance when using 11 turning on and off 43 unlocking 44 version 139 radio check 92 radio display error messages 138 radio frequency (RF) energy Index 149 displaying when receive status indicators causing electronic devices to malfunction 16 compliance with exposure standards 11 controlling exposure to 11 radio unit ID 57, 105 calls 57 radio-based failsoft 73 radio-monitor request 93 recent calls 52 red LED 36 related documentation 22 repeater talkaround 59 radio display icon for 34 turning on and off 59 revive 94 RF, exposure to 10 RFSS controller. See zone controller 65 S safe distance, recommended from radio 11 safety information 10 scan groups changing group membership 75 removing nuisance channel from 81 scanning priority 76 talkgroups (trunking) 80 scrolling indicator 35 short key press 32 signals, hearing faint and 150 Index noisy 62 site controller 65 site trunking mode 65 speaker volume, adjusting 44 squelch mute 62 squelch override turning on and off 62 about 37 status LEDs 37 status request 90 status updates sending 89 stun 94 T talkaround. See repeater talkaround. talkgroup (conventional) making a call to 56 selecting 56 talkgroup (trunking) making a call to 68 priority 76 scanning 80 selecting 68 talkgroup scan changing group membership 75 talking directly to other radios 59 talking party ID turning on and off 57 time-out timer 51 traffic channel 64 transmission time, limited transmit timer 51 transmitting, at low power 51 123 troubleshooting 138 trunking operation about 64 control channel 64, 74 dynamic regrouping 74 failsoft mode 65, 73 individual calls 68 infrastructure failsoft 73 no service indicators 65 phone calls 71 radio-based failsoft 73 registration unsuccessful indicators 64 RFSS controller. See zone controller 65 site controller 65 site trunking mode 65 talkgroup call 66 traffic channel 64 zone controller 65 trunking system about 64 service lost 65 two-tone calls 58 U unit ID 140 unlocking the radio 44 V Valid 37 version information, of radio 139 volume, changing 44 voting 60 voting groups removing channels from 61 W warning tones. See audible warnings, on radio display tones 138 wireless headset connecting 45 Z zone controller 65 zones 49 Index 151 Directive 1999/5/CE Declaration of Conformity Italiano Nederlands it Con la presente Tait Limited dichiara che questo TPDB1A & TPDH5A conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Vedi anche: www.taitradio.com/eudoc/

nl Hierbij verklaart Tait Limited dat het toestel TPDB1A & TPDH5A in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/

EG. Zie ook: www.taitradio.com/eudoc/

pt Tait Limited declara que este TPDB1A &

TPDH5A est conforme com os requisitos essenciais e outras provises da Directiva 1999/5/CE. Veja tambm: www.taitradio.com/eudoc/

sv Hrmed intygar Tait Limited att denna TPDB1A & TPDH5A str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Se ven: www.taitradio.com/eudoc/

Portugus Svensk Dansk English Deutsch da Undertegnede Tait Limited erklrer herved, at flgende udstyr TPDB1A &

TPDH5A overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Se endvidere: www.taitradio.com/eudoc/

de Hiermit erklrt Tait Limited die berein-

stimmung der Gerte TPDB1A & TPDH5A mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Siehe auch: www.taitradio.com/eudoc/

el Tait Limited TPDB1A &

TPDH5A 1999/5/.

: www.taitradio.com/eudoc/

en Tait Limited declares that this TPDB1A &

TPDH5A complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. See also: www.taitradio.com/eudoc/

es Por medio de la presente Tait Limited declara que las radios TPDB1A &

TPDH5A cumplen con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Vase tambin:

www.taitradio.com/eudoc/

fi Tait Limited vakuuttaa tten ett TPDB1A

& TPDH5A tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Katso: www.taitradio.com/eudoc/

fr Par la prsente, Tait Limited dclare que les appareils TPDB1A & TPDH5A sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Voir aussi: www.taitradio.com/eudoc/

Franais Espaol Suomi 152 Directive 1999/5/CE Declaration of Conformity Tait Software Licence Agreement This Software License Agreement

("Agreement") is between you

(Licensee) and Tait Limited (Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software. If you install or use any of the Software, that will be deemed to be acceptance of the terms of this Agreement. For good and valuable consideration, the parties agree as follows:

SECTION 1 DEFINITIONS Confidential Information means all or any information supplied to or received by Licensee from Tait, whether before or after installation or use and whether directly or indirectly pertaining to the Software and Documentation supplied by Tait, including without limitation all information relating to the Designated Products, hardware, software;

copyright, design registrations, trademarks; operations, processes, and related business affairs of Tait;

and including any other goods or property supplied by Tait to Licensee pursuant to the terms of this Agreement. Designated Products means products provided by Tait to Licensee with which or for which the Software and Documentation is licensed for use. Documentation means product and software documentation that specifies technical and performance features and capabilities; user, operation, and training manuals for the Software; and all physical or electronic media upon which such information is provided. Executable Code means Software in a form that can be run in a computer and typically refers to machine language, which is comprised of native instructions the computer carries out in hardware. Executable code may also refer to programs written in interpreted languages that require additional software to actually execute. Intellectual Property Rights and Intellectual Property mean the following or their substantial equivalents or counterparts, recognized by or through action before any governmental authority in any jurisdiction throughout the world and including, but not limited to all rights in patents, patent applications, inventions, copyrights, trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation;

including any adaptations, corrections, de-compilations, disassemblies, emulations, enhancements fixes, modifications, translations and updates to or derivative works from, the Software or Documentation, whether made by Tait or another party, or any improvements that result from Tait processes or, provision of information services. Licensee means any individual or entity that has accepted the terms of this License. Open Source Software means software with freely obtainable source code and license for modification, or permission for free distribution. Open Source Software License means the terms or conditions under which the Open Source Software is licensed. Tait Software Licence Agreement 153 Person means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority. Security Vulnerability means any flaw or weakness in system security procedures, design, implementation, or internal controls that if exercised

(accidentally triggered or intentionally exploited) could result in a security breach such that data is compromised, manipulated, or stolen, or a system is damaged. Software (i) means proprietary software in executable code format, and adaptations, translations, de-

compilations, disassemblies, emulations, or derivative works of such software; (ii) means any modifications, enhancements, new versions and new releases of the software provided by Tait; and (iii) may contain one or more items of software owned by a third-party supplier. The term "Software" does not include any third-party software provided under separate license or not licensable under the terms of this Agreement. Source Code means software expressed in human readable language necessary for understanding, maintaining, modifying, correcting, and enhancing any software referred to in this Agreement and includes all states of that software prior to its compilation into an executable programme. Tait means Tait Limited and includes its Affiliates. SECTION 2 SCOPE This Agreement contains the terms and conditions of the license Tait is providing to Licensee, and of Licensees use of the Software and Documentation. Tait and Licensee enter into this Agreement in 154 Tait Software Licence Agreement connection with Tait delivery of certain proprietary Software and/or products containing embedded or pre-loaded proprietary Software. SECTION 3 GRANT OF LICENSE 3.1. Subject to the provisions of this Agreement and the payment of applicable license fees, Tait grants to Licensee a personal, limited, non-

transferable (except as permitted in Section 7), and non-exclusive license to use the Software in executable code form, and the Documentation, solely in connection with Licensee's use of the Designated Products for the useful life of the Designated Products. This Agreement does not grant any rights to source code. 3.2. If the Software licensed under this Agreement contains or is derived from Open Source Software, the terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the copyright owner and not in this Agreement. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the any applicable Open Source Software Licenses, the terms and conditions of the Open Source Software Licenses will take precedence. For information about Open Source Components contained in Tait products and the related Open Source licenses, see:

http://support.taitradio.com/go/

opensource SECTION 4 LIMITATIONS ON USE 4.1. Licensee may use the Software only for Licensee's internal business purposes and only in accordance with the Documentation. Any other use of the Software is strictly prohibited. Without limiting the general nature of these restrictions, Licensee will not make the Software available for use by third parties on a "time sharing,"

"application service provider," "service bureau" basis, or for any other similar commercial rental or sharing arrangement. 4.2. Licensee will not, and will not directly or indirectly allow or enable any third party to: (i) reverse engineer, disassemble, extract components, decompile, reprogram, or otherwise reduce the Software or any portion thereof to a human perceptible form or otherwise attempt to recreate the source code; (ii) modify, adapt, create derivative works of, or merge the Software; (iii) copy, reproduce, distribute, lend, or lease the Software or Documentation to any third party;

(iv) grant any sublicense or other rights in the Software or Documentation to any third party; (v) take any action that would cause the Software or Documentation to be placed in the public domain; (vi) remove, or in any way alter or obscure any copyright notice or other notice of Tait or third-

party licensors proprietary rights; (vii) provide, copy, transmit, disclose, divulge or make the Software or Documentation available to, or permit the use of the Software by, any third party or on any machine except as expressly authorized by this Agreement; or (viii) use, or permit the use of, the Software in a manner that would result in the production of a copy of the Software by any means whatsoever other than what is permitted in this Agreement. Licensee may make one copy of the Software to be used solely for archival, back-up, or disaster recovery purposes; provided that Licensee may not operate that copy of the Software at the same time as the original Software is being operated. Licensee may make as many copies of the Documentation as it may reasonably require for the internal use of the Software. 4.3. Unless otherwise authorized by Tait in writing, Licensee will not, and will not enable or allow any third party to: (i) install a copy of the Software on more than one unit of a Designated Product; or (ii) copy or transfer Software installed on one unit of a Designated Product to any other device. Licensee may temporarily transfer Software installed on a Designated Product to another device if the Designated Product is inoperable or malfunctioning. Temporary transfer of the Software to another device must be discontinued when the original Designated Product is returned to operation and the Software must be removed from the other device. 4.4. Licensee will maintain, during the term of this Agreement and for a period of two years thereafter, accurate records relating to this license grant to verify compliance with this Agreement. Tait, or a third party nominated by Tait, may inspect Licensees premises, books and records, upon reasonable prior notice to Licensee, during Licensees normal business hours and subject to Licensee's facility and security regulations. Tait is responsible for the payment of all expenses and costs of the inspection, provided that Licensee shall indemnify Tait for all costs

(including audit costs and legal costs on a solicitor client basis) if Licensee has breached the terms of this Agreement. Any information obtained by Tait during the course of the inspection will be kept in strict confidence by Tait and used solely for the purpose of verifying Licensee's compliance with the terms of this Agreement. SECTION 5 OWNERSHIP AND TITLE Tait, its licensors, and its suppliers retain all of their Intellectual Property Rights in and to the Software and Documentation, in any form. No rights are granted to Licensee under this Agreement by implication, estoppel or Tait Software Licence Agreement 155 otherwise, except for those rights which are expressly granted to Licensee in this Agreement. All Intellectual Property developed, originated, or prepared by Tait in connection with providing the Software, Designated Products, Documentation, or related services, remains vested exclusively in Tait, and Licensee will not have any shared development or other Intellectual Property Rights. SECTION 6 LIMITED WARRANTY; DISCLAIMER OF WARRANTY 6.1. The commencement date and the term of the Software warranty will be a period of one (1) year from Tait shipment of the Software. If Licensee is not in breach of any obligations under this Agreement, Tait warrants that the unmodified Software, when used properly and in accordance with the Documentation and this Agreement, will be free from a reproducible defect that eliminates the functionality or successful operation of a feature critical to the primary functionality or successful operation of the Software. Whether a defect has occurred will be determined solely by Tait. Tait does not warrant that Licensees use of the Software or the Designated Products will be uninterrupted, error-free, completely free of Security Vulnerabilities, or that the Software or the Designated Products will meet Licensees particular requirements. Tait makes no representations or warranties with respect to any third-party software included in the Software. 6.2 Tait sole obligation to Licensee, and Licensees exclusive remedy under this warranty, is to use reasonable efforts to remedy any material Software defect covered by this warranty. These efforts will involve either replacing the media or attempting to correct significant, 156 Tait Software Licence Agreement demonstrable program or documentation errors or Security Vulnerabilities. If Tait cannot correct the defect within a reasonable time, then at Tait option, Tait will replace the defective Software with functionally equivalent Software, license to Licensee substitute Software which will accomplish the same objective, or terminate the license and refund Licensees paid license fee. If Tait investigation of the perceived defect reveals that no such defect in fact exists, Tait may recover its costs in respect of such investigation from Licensee. 6.3. Tait disclaims any and all other warranties relating to the Software or Documentation other than the express warranties set forth in this Section 6. Warranties in Section 6 are in lieu of all other warranties whether express or implied, oral or written, and including without limitation any and all implied warranties of condition, title, non-

infringement, merchantability, or fitness for a particular purpose or use by Licensee (whether Tait knows, has reason to know, has been advised of, or is otherwise aware of any such purpose or use), whether arising by law, by reason of custom or usage of trade, or by course of dealing. In addition, Tait disclaims any warranty to any person other than Licensee with respect to the Software or Documentation. SECTION 7 TRANSFERS 7.1. Licensee will not transfer the Software or Documentation to any third party without specific prior written consent from Tait. Tait may withhold such consent or at its own discretion make the consent conditional upon the transferee paying applicable license fees and agreeing to be bound by this Agreement. 7.2. In the case of a value-added reseller or distributor of Tait Designated Products, the consent referred to in Section 7.1 may be contained in a Tait Reseller or Tait Distributor Agreement. 7.3. If the Designated Products are Tait vehicle-mounted mobile products or hand-carried portable radio products and Licensee transfers ownership of the Tait mobile or portable radio products to a third party, Licensee may assign its right to use the Software which is embedded in or furnished for use with the radio products and the related Documentation; provided that Licensee transfers all copies of the Software and Documentation to the transferee. 7.4. For the avoidance of any doubt, Section 7.3 excludes TaitNet Infrastructure, or the products listed at any time under network products at:

http://www.taitradio.com. 7.5. If Licensee, as a contractor or subcontractor (integrator), is purchasing Tait Designated Products and licensing Software not for its own internal use but for end use only by a Customer, the Licensee may transfer such Software, but only if a) Licensee transfers all copies of such Software and the related Documentation to the transferee and b) Licensee has first obtained from its Customer (and, if Licensee is acting as a subcontractor, from the interim transferee(s) and from the ultimate end user sub license) an enforceable sublicense agreement that prohibits any other transfer and that contains restrictions substantially identical to the terms set forth in this Software License Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorised by this Section may not otherwise transfer or make available any Tait Software to any third party nor permit any party to do so. Licensee will, on request, make available evidence reasonably satisfactory to Tait demonstrating compliance with all the foregoing. SECTION 8 TERM AND TERMINATION 8.1. Licensees right to use the Software and Documentation will commence when the Designated Products are supplied by Tait to Licensee and will continue for the life of the Designated Products with which or for which the Software and Documentation are supplied, unless Licensee breaches this Agreement, in which case this Agreement and Licensee's right to use the Software and Documentation may be terminated immediately upon notice by Tait. 8.2. Within thirty (30) days after termination of this Agreement, Licensee must certify in writing to Tait that all copies of the Software have been removed or deleted from the Designated Products and that all copies of the Software and Documentation have been returned to Tait or destroyed by Licensee and are no longer in use by Licensee. 8.3. Licensee acknowledges that Tait made a considerable investment of resources in the development, marketing, and distribution of the Software and Documentation and that Licensee's breach of this Agreement will result in irreparable harm to Tait for which monetary damages would be inadequate. If Licensee breaches this Agreement, Tait may terminate this Agreement and be entitled to all available remedies at law or in equity including immediate injunctive relief and repossession of all non-

embedded Software and associated Documentation. Licensee shall pay all Tait costs (on an indemnity basis) for the enforcement of the terms of this Agreement. SECTION 9 CONFIDENTIALITY Licensee acknowledges that the Software and Documentation contain proprietary and Confidential Information valuable to Tait and are Tait Software Licence Agreement 157 Tait trade secrets, and Licensee agrees to respect the confidentiality of the information contained in the Software and Documentation. SECTION 10 LIMITATION OF LIABILITY 10.1. In no circumstances shall Tait be under any liability to Licensee, or any other person whatsoever, whether in Tort (including negligence), Contract

(except as expressly provided in this Agreement), Equity, under any Statute, or otherwise at law for any losses or damages whether general, special, exemplary, punitive, direct, indirect, or consequential arising out of or in connection with any use or inability of using the Software. 10.2. Licensees sole remedy against Tait will be limited to breach of contract and Tait sole and total liability for any such claim shall be limited at the option of Tait to the repair or replacement of the Software or the refund of the purchase price of the Software. SECTION 11 GENERAL 11.1. COPYRIGHT NOTICES. The existence of a copyright notice on the Software will not be construed as an admission or presumption of publication of the Software or public disclosure of any trade secrets associated with the Software. 11.2. COMPLIANCE WITH LAWS. Licensee acknowledges that the Software may be subject to the laws and regulations of the jurisdiction covering the supply of the Designated Products and will comply with all applicable laws and regulations, including export laws and regulations, of that country. 11.3. ASSIGNMENTS AND SUBCONTRACTING. Tait may assign its rights or subcontract its obligations under this Agreement, or encumber or sell its rights in any Software, without prior notice to, or consent of, Licensee. 158 Tait Software Licence Agreement 11.4. GOVERNING LAW. This Agreement shall be subject to and construed in accordance with New Zealand law and disputes between the parties concerning the provisions hereof shall be determined by the New Zealand Courts of Law. Provided however Tait may at its election bring proceedings for breach of the terms hereof or for the enforcement of any judgment in relation to a breach of the terms hereof in any jurisdiction Tait considers fit for the purpose of ensuring compliance with the terms hereof or obtaining relief for breach of the terms hereof. 11.5. THIRD-PARTY BENEFICIARIES. This Agreement is entered into solely for the benefit of Tait and Licensee. No third party has the right to make any claim or assert any right under this Agreement, and no third party is deemed a beneficiary of this Agreement. Notwithstanding the foregoing, any licensor or supplier of third-party software included in the Software will be a direct and intended third-party beneficiary of this Agreement. 11.6. SURVIVAL. Sections 4, 5, 6.3, 7, 8, 9, 10, and 11 survive the termination of this Agreement. 11.7. ORDER OF PRECEDENCE. In the event of inconsistencies between this Agreement and any other Agreement between the parties, the parties agree that, with respect to the specific subject matter of this Agreement, this Agreement prevails. 11.8. SECURITY. Tait uses reasonable means in the design and writing of its own Software and the acquisition of third-party Software in order to limit Security Vulnerabilities. While no software can be guaranteed to be free from Security Vulnerabilities, if a Security Vulnerability is discovered, Tait will take the steps specified in Section 6 of this Agreement. 11.9. EXPORT. Licensee will not transfer, directly or indirectly, any Designated Product, Documentation or Software furnished hereunder or the direct product of such Documentation or Software to any country for which New Zealand or any other applicable country requires an export license or other governmental approval without first obtaining such license or approval. 11.10. SEVERABILITY. In the event that any part or parts of this Agreement shall be held illegal or null and void by any court or administrative body of competent jurisdiction, such determination shall not affect the remaining terms which shall remain in full force and effect as if such part or parts held to be illegal or void had not been included in this Agreement. Tait may replace the invalid or unenforceable provision with a valid and enforceable provision that achieves the original intent and economic effect of this Agreement. 11.11. CONSUMER GUARANTEES. Licensee acknowledges that the licenses supplied in terms of this agreement are supplied to Licensee in business, and that the guarantees and other provisions of prevailing consumer protection legislation shall not apply. 11.12. WHOLE AGREEMENT. Licensee acknowledges that it has read this Agreement, understands it and agrees to be bound by its terms and conditions. Licensee also agrees that, subject only to the express terms of any other agreement between Tait and Licensee to the contrary, this is the complete and exclusive statement of the Agreement between it and Tait in relation to the Software. This Agreement supersedes any proposal or prior agreement, oral or written, and any other communications between Licensee and Tait relating to the Software and the Designated Products. Tait Software Licence Agreement 159 160 Tait Software Licence Agreement