26-Sep.2019 Ver.0.51 EYSKBN TAIYO YUDEN CO., LTD. User manual
(for EYSKBN) FCC ID: RYYEYSKBN IC Number: 4389B-EYSKBN TAIYO YUDEN CO., LTD. 1/3 26-Sep.2019 Ver.0.51 EYSKBN TAIYO YUDEN CO., LTD. Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification
(installation procedure). The following information must be indicated on the host device of this module;
1) Japan Regulatory Information a) This module is approved with the specic antenna on this module. b) Please ensure that your product can bear a label with the following information. If the product is so small that it is not practicable to place the label, please place it in the instruction manual and package. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. EYSKBN : 001-A 2) Canada Regulatory Information a) This device complies with Industry Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. b) This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product and have a separation distance of minimum 15 mm between the user and/or bystander and the antenna and /or radiating element. This distance ensures that the output power (e.i.r.p.) of EYSKBN is below the SAR evaluation Exemption limits defined in RSS-102 issue 5. Ce produit est certifi comme type de l'appareil portable avec Industrie Rgles de Canada. Pour maintenir l'acquiescement avec exigence Exposition de RF, veuillez utiliser dans spcification de ce produit et respecter une distance de sparation d'au moins 15 mm entre l'utilisateur et / ou un tiers et l'antenne et / ou l'lment rayonnant. Cette distance garantit que la puissance de sortie (p.i.r.e.) dEYSKBN est infrieure aux limites dexemption de lvaluation SAR dfinies dans le numro 5 de la norme RSS-102.
- IC: 4389B-EYSKBN TAIYO YUDEN CO., LTD. 2/3 26-Sep.2019 Ver.0.51 EYSKBN TAIYO YUDEN CO., LTD. c) Please notify certified ID by either one of the following method on your product.
-Contains IC : 4389B-EYSKBN Specifiez ID certifie dans votre produit par une de mthode suivante.
-Contains IC : 4389B-EYSKBN 3) FCC Regulatory Information a) This device complies with part 15 of the FCC Rules.
-Part 15 Subpart C b) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. c) Please notify certified ID by either one of the following method on your product.
-Contains Transmitter Module FCC ID: RYYEYSKBN
-Contains FCC ID: RYYEYSKBN d) CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment. e) The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. f) This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. g) The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. h) This module can change the output power depending on the circumstances by the application software which is developed by module installer. Any end user cannot change the output power. 4) CE Regulatory Information a) When your end product installs this module, it is required to proceed additional certification processes before placing on the market in EU member states to make your products fully comply with relative EU standards. b) TAIYO YUDEN can provide you the test reports of conducted measurement portion for the radio module. You can utilize the test reports for the certification processes of your end product as it requires radio testing. TAIYO YUDEN CO., LTD. 3/3