Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Trademark Information BTW is a product of Widcomm Inc. Windows, Windows 98, Windows NT, Windows Millennium, Windows XP are trademarks of Microsoft Corporation. Internet Explorer is a product of Microsoft Corporation. The BLUETOOTH trademarks are owned by Bluetooth SIG and used by Taiyo Yuden under license. T39 handset is a product of Ericsson. All other trade names mentioned in this document or the other documentation provided with Bluetooth USB Dongle are trademarks or registered trademarks of their respective holders. Page 1 Rev 1.29_30Aug02 Taiyo Yuden Table of Contents Getting Started With the Bluetooth Software BTW and USB Adaptor Item System Requirement Bluetooth Software Install step by Step Start Connection Over The Bluetooth Airwaves File Transfer Connecting Over The Bluetooth Airwaves Security Start Connection Over The Bluetooth Airwaves Dial Up Networking Profile Page 3 3 -9 10-13 14 - 15 16 - 18 Page 2 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor System Requirements BTW runs under:
- Windows 98 (Second edition)
- Millennium (Windows 98 ME)
- Windows 2000
- Windows XP During the installation, you need a CD-ROM driver for access to the bundle software. Note: This Getting Started is a simple guide , for more Users Guide please see the BTW Users Guide.pdf in BTW CD. Or you can click the Help Topics in the Help Menu of the Tool Bar. Bluetooth Software Install step by step Step 1 Insert the Widcomm BTW CD into the PCs CDROM drive. Installation proceeds automatically. Since Windows NT does not support USB, the installation of the CD should be done on systems with Windows 98 or Windows 2000. Step 2 An InstallShield box appears to inform you the installation Wizard is being set up. Please wait. Page 3 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 3 A Welcome To The Installation Wizard window appears as shown in Figure 2. Select Next to continue the installation proccess. Figure 2. Welcome Window Note: These images were captured from a Windows 2000 system. Your images may look slightly different. Step 4 The license agreement window appears as shown in Figure 3. If you accept, mark the I accept the terms in the license agreement option and click on Next. The installation will proceed. If you do not accept the conditions of the agreement, the installation process will terminate. Figure 3. License Agreement Window Page 4 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 5 A Device Information window opens as shown in Figure 4. Enter a device name and choose a device type. These options will not affect the functionality. The device information is used to inform the master device what kinds of other devices are within range to connect to so the user can identify which device is the one they need to connect to if there is more than one device within range. Select the Next Button. Figure 4. Device Information Window Figure 5. Destination Folder Window Step 6 A Destination Folder window appears as shown in Figure 5, which states the default location and gives you the opportunity to choose an alternative folder. When the location is acceptable, select Next. Page 5 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 7 A Ready to Install Program window appears as shown in Figure 6. Select Install when you are ready to proceed. Figure 6. Ready to Install Window Figure 7. Installing Window Step 8 An Installing Widcomm Status window appears. Please be patient, this may take up to 5 minutes. Step 9 A notification window appears asking you to restart your system. Select Yes to proceed. Page 6 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 10 You will be informed when the installation is complete. Select Finish. Follow the instructions thereafter. You may be asked to restart the computer after the installation completes. In that case click OK and restart the computer. Figure 8. Install Complete Window Step 11 A Bluetooth Neighborhood logo has appeared on your desktop and a small Bluetooth icon has appeared on your icon tray (lower right-hand side of the screen). Page 7 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 12 Plug the Bluetooth USB Dangle into you usb port ,The OS will install the usb Driver auto. And you can check it in the My computer -
> Device Manager. You may now remove the Widcomm CD from your CD drive. Figure 9. Device Manager Window Step 13 Lets configure your devices. On your icon tray (lower right-hand side of the screen), right click on the small Bluetooth Neighborhood icon on your icon tray. Step 14 A pull down window appears with two words, Security (which we will discuss later) and Configuration. Choose Configuration. Step 15 A Bluetooth Configuration window appears as shown in Figure 10. In this document, there are three tabs-of-interest: General, Information Exchange, and Hardware. Select the General tab. Step 16 Type in a name for your device and choose either Laptop or Desktop. The security options default is medium; leave that as it is for now. Select OK. Figure 10. Bluetooth Configuration Window -
General Tab Page 8 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 17 Now choose the Information Exchange tab as shown in Figure 11. The My Shared Directory window allows you to determine where you would like to locate files you want to share with other devices. The default is called File Transfer. My Inbox Directory is the dialogue window that allows you to determine where you wish to put incoming files. Configure the many choices on this tab now or leave them at the default settings and then select OK. Figure 11. Bluetooth Configuration Window Information Exchange Tab Step 18 Now choose the Hardware tab. Once you have established a connection, you will see the BD Address and other interesting information about the device. Figure 12. Bluetooth Configuration Window -
Hardware Tab Page 9 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Start Connecting Over The Bluetooth Airwaves File Transfer Step 1 Double click on the Bluetooth Neighborhood icon located on your desktop. A Bluetooth Neighborhood window appears as shown in Figure 13. Double click on the Entire Bluetooth icon. This will perform an inquiry and search for other nearby devices. Figure 13. Bluetooth Neighborhood Window Step 2 Then, Double click on the Search For Devices icon. It will find your other bluetooth device as shown in Figure 14. If you have other Bluetooth devices in the area, they will be located and appear on your screen as Unknown. Only the devices that you have configured will have a name. Double click here Figure 14. Found Configured Device Note: Because of over-the-air interference and if you have a lot of devices in the evaluation area, then you might have to click on Search for Devices a few times . Page 10 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 3 On your master device, double click on the icon named after your slave device as shown in Figure 15. It will show all profile that the slave support as shown in Figure 16. Figure 15. Found Configured Device Figure 15. Explore Series window Step 4 Double click on the icon Public Folder. It will connect to the Shared Directory of the slave device (See the step 17). And show all the files in the Share Directory. Page 11 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 5 Figure 17 show there are no files in the Share Directory. Figure 17. Explore files window Step 6 Now, you can copy files from the Files Manager master device. Figure 18. Windows 2000 Files Manager Page 12 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 7 Then, Paste this file into Public Folder, A Copying Window appears as shown in Figure 20. Figure 19. Paste files to Public Folder Figure 20. Copying Step 8 When the copy is completed, you will see the file name listed in the Public Folder. Figure 21. Copy completed window Page 13 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Connecting Over The Bluetooth Airwaves Security Step 1 Go back to the icon tray (lower right-hand side of the screen) and right click on the small Bluetooth Neighborhood icon. Highlight Configuration on the pull down window. Step 2 The Bluetooth Configuration window opens as shown in Figure 22. Select the General tab. Under Security, choose the High option. This will enable encryption. Click OK. (If you choose the Medium option, encryption will be disabled.) Figure 22. Bluetooth Configuration Window Encryption Enabled Step 3 Send any file(s) in encrypted mode by repeating Step 2. Step 4 For additional security, right click on the icon trays small Bluetooth Neighborhood icon again. On the pull down window, highlight Security. The window shown in Figure 23 opens with two sections. All of your found devices will be on the left-hand side. Figure 23. Bluetooth Security Window Page 14 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Figure 24. Bluetooth Passkey Request Step 5 Highlight a device and click on the Execute Pairing button. Now this is the only device(s) that can connect to your computer. The user is asked for a passkey. The Bluetooth Passkey Request window opens as shown in Figure 24. Step 6 Click on the OK button after entering the passkey in the Bluetooth Passkey window. Step 7 On the other device, the Bluetooth icon on the icon tray (lower right-hand side of the screen) will blink. On clicking the icon a Bluetooth passkey request window pops up requesting the user to enter passkey. Enter the same passkey as given on the first device. Click on OK button.Successfully finding the Available services on the second device will Be an indication that we are in connection using pairing. If there is any Security Error message, make sure that the passkeys given on both devices are the same. Page 15 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Start Connecting Over The Bluetooth Airwaves Dial-up Networking Profile Example 1 : Use the ERICSSON T39mc mobile ( with the Bluetooth module and GPRS service and provide Dial-up Networking Profile) Step 1 Plug on the Bluetooth USB Dangle, Execute the BTW program Step 2 Before you using this application you must to pair the master device and T39mc, After pairing successfully at the first time, the PC and T39mc will recognize each other, Then, you can use the all services of the T39mc without being recognized again column devices?
USI12162 Add to paired Add to paired Passkey:xxx Paired devices Add device Add to paired 1 Phone initiates 2 Phone accepts connection request detected message on the PC screenclick the icon Add types 1 All types 2 Headset 3 PC Bluetooth 1 Discoverable 2 Paired devices 3 Discover Extras 5 Synchronization 6 Bluetooth 7 Time In this step you must enter the Passkey : xxx (for wmample: 123) on the T39mc sideand then you will see a Bluetooth Step 3 Make pair from T39mc T39mc setting :
Figure 25 Bluetooth Passkey Request Page 16 Rev 1.29_30Aug02 and enter the same passkey(123) into the Pairing successful Add device USI12162 Name tag :
USI12162 Enter tag name Pairing Completed Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 4 After pairing finished, click and you can see the icon
. Figure 26. Found Configured Device Figure 27. Explore Series window Step 5 Double click icon the services T39mc support, click icon
,you can see what are
. Page 17 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor Step 6 Enter the usernamepassword and Dial_up number, then click Dial. If it connect successful you see the Message BluetoothConnection . Figure 28. Bluetooth Dial_up Window Step 7 Before you connect to web side, be sure to set the BluetoothConnection device to be your default connection. Now, you can connect to web. Figure 29. Internet Option Window Page 18 Rev 1.29_30Aug02 Taiyo Yuden Getting Started With the Bluetooth Software BTW and USB Adaptor CAUTION: To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause undesired operation. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Canadian Radio Interference Regulations: This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry Canada. Cet appareil numrique respecte les limites de bruits radio lctiques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur: "Appareils Numriques", NMB-003 dicte par l'Industrie Canada. Page 19 Rev 1.29_30Aug02