FCC ID: RYYEYTMECS Complete Class 2 Bluetooth Module

 

EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Bluetooth Module EYTMECS User Manual In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. We wish the customer to request the Specification Report when the design for the mass production begins because the content of this Data Report might change without a previous notice to the customer. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN 1/39 EYTMECS Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Electrical characteristics Electrical characteristics Electrical characteristics Circuit schematic Outline / Appearance Outline / Appearance Pin Layout Rev. record 6-Dec.-2008> Ver.0.5 Draft 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AG-A080137 HD-AM-A080137 HD-AE-A080137 HD-AE-B080137 HD-AE-C080137 HD-AE-D080137 HD-MC-A080137 HD-AD-A080137 HD-AD-B080137 HD-BA-A080137 Document Page 1/3 - 3/3 1/1 1/3 - 3/3 1/2 - 2/2 1/11 - 11/11 1/11 - 11/11 1/1 1/1 1/1 1/1 TAIYO YUDEN 2/39 EYTMECS Control No. HD-AG-A080137 (1/3) Control name General Items 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Scope This specification (Specification) applies to the hybrid IC EYTMECS for use Bluetooth module

(Product) manufacture by TAIYO YUDEN Co., Ltd. (TAIYO YUDEN) 1. Users Code: EYTMECS(USB I/F Support) Digit3: Customer Code ex) S: TAIYO YUDEN Standard Digit8: Software Code ex) X: TAIYO YUDEN Standard Digit9: Hardware Code ex) X: TAIYO YUDEN Standard

* Users Code may be modified for mass production or other cases. Please see m for more information. Type: EYTMECS 2. Function: Radio frequency transfer Module (power class 2). Bluetooth standard Ver 2.1+EDR conformity 3. Application: Laptop PC, PC peripheral, Handy terminal 4. Structure: Hybrid IC loaded with silicon monolithic semiconductor 5. Outline: Cable Connector Type 6. Marking: TBD 7. Features:

-Bluetooth 2.1+EDR conformity

-QD ID: ****** (Controller Subsystem)

-USB Interface

-Hold, Sniff and Park Mode

-Supported Link Type: ACL links (Piconet<7>), (e)SCO links (Piconet<3>)

-AFH (Adaptive Frequency Hopping)

-Faster Inquiry & Connection

-EDR(Enhanced Data Rate)

-SSP (Secure Simple Pairing), SSR (Sniff Subrating), EIR (Extended Inquiry Response) and EPR (Encryption Pause/Resume) 8. Packing:TBD 9. Terminal: Data input-output (10pin Cable Connector) J.S.T.Mfg.Co.,Ltd. : SM10B-SSR-H-TB(LF)(SN) RF input-output (Antenna) 10. Mount: TBD 11. Notes:

hereof. radiation. a. Any question arising from this Specification shall be solved through mutual discussion by the parties b. This Product is not designed for radiation durable and should not be used under the circumstance of c. The operating conditions of this Product are as shown in this Specification. Please note that TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions other than the operating conditions hereof. TAIYO YUDEN 3/39 EYTMECS Control No. HD-AG-A080137 (2/3) Control name General Items 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative d. This Product mentioned in this Specification is manufactured for use in Laptop PC, PC peripheral and Handy terminal. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. e. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. The warranty period shall be one year. g. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other Bluetooth products. h. This Product is designed for use in products which comply with Bluetooth Specifications (Ver 2.1+EDR)

(Bluetooth Specifications). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the non-complying products). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. i. TAIYO YUDEN dose not render updating or upgrading service for the firmware in the Module. j. In order to take tests for getting the certification of each countrys Radio Law with a device incorporating this module, it is necessary to make the software in Host to put the module into test condition. Please contact TAIYO YUDEN for farther details. k. Please evaluate adequately our module incorporated to your products before mass production. l. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. m. Users Code Modification Notice (Bluetooth Modules) Users Code may be modified based on mass production stage, Bluetooth logo Qualification stage, or other related stages. Please contact TAIYO YUDEN to confirm whether your Users Code needs to be modified. Please see the following examples for cases that Users Code are modified:

- for specific firmware version (our standard item firmware will be upgraded occasionally)

- for specific BD address (our standard item BD address is owned by TAIYO YUDEN )

- for specific PnP (Plug and Play) IDs (our standard item PnP IDs are owned by TAIYO YUDEN or chip manufacture) EYTMECS Setting: USB Product ID : 0x0508, USB Vendor ID : 0x0930

- for other related cases (specific or different setting, form, sizes, or display etc..) In case you have applied for Bluetooth Qualification with our standard Users Code without previous notice to TAIYO YUDEN, we shall not be responsible for any expense that will be required to change its name/number. TAIYO YUDEN 4/39 EYTMECS Control No. HD-AG-A080137 (3/3) Control name General Items 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative n. Containment of hazardous substance in this Product

*Pb (Lead) : Non use

* This product conforms to RoHS Directive(2002/95/EC). p. In addition when this Product is used under environmental conditions such as over voltage which are not guaranteed ,it may be destroyed in short mode. To ensure the security of customers product, please add an extra fuse or/and a protection circuit for over voltage. q. In some cases, TAIYO YUDEN may use replacements as component parts of Products. Such replacement shall apply only to component part of Products, which TAIYO YUDEN deems it possible to replace or substitute according to (i) Scope provided in this Specification (e.g. Official Standard (Type Approvals, Bluetooth LOGO etc.)) and (ii) Quality of Products. TAIYO YUDEN also ensures traceability of such replacement on production lot basis. r. Do not alter Hardware and/or Software of this Product. Please note that TAIYO YUDEN shall not be liable for any problem if it is caused by customer's alteration of Hardware or/and Software without Taiyo Yuden's prior approvals. This module is still under development, thus specifications do not guarantee both the quality and reliability at the time of shipment. Since the specifications and mass production of the module are not confirmed either, the contents of the technical notes are subject to change without any prior notice. TAIYO YUDEN 5/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AM-A 080137 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Symbol Supply voltage VDD_3.3V Input voltage Vin Min.

-0.3

-0.3 Typ. Rating Max. 3.6 VDD_3.3V

+0.3 Unit V V Remark Ta=25 degrees C, GND reference I/O terminals except USB interface Recommendation operating range Symbol Item Supply voltage Supply voltage ripple and spike noise Operation temperature range Storage temperature range VDD_3.3V VDD_rn Topr Tstg Min. 3.15

-25

-30 Rating Max. 3.45

(30) 75 85 Typ. 3.3 25 25 Unit V Remark Note 1 mVp-p Degrees C Humidity=40%RH Degrees C Humidity=40%RH Note 2 Note 3 Notes:

1. To fill the standard of Supply voltage ripple and spike noise, the capacitor, which has the capacity of 2.2uF or more , should be put in the terminal VDD_3.3V outside as a bypass capacitor . 2. Operating temperature range is set to satisfy products electrical characteristics in the short term. In terms of product life cycle when it is used in condition of varying from TYP standard in the long term, please refer to the reliability condition. 3. Storage temperature range is the condition for transportation and storage in temporary. TAIYO YUDEN 6/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative 0.7xVDD _3.3V 2.0

VIH2 VOL1 VOL2 VOH1 VDD_3.3V VOH2 Iccp1 Icca1 Icca2 Icca3 Icca4 Icca5 Icca6

-0.4 2.8 Control name Electrical characteristics Control No. HD-AE-A080137 (1/3) Electrical characteristic DC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V Min. No. 1 Normal supply voltage 3.15 2 Input Low Voltage1 3 Input Low Voltage2

/RESET, PIOX USB_D+, USB_D-

Symbol VDD_3.3 VIL1 VIL2 Parameter Condition

-0.3

V 4 Input High Voltage1

/RESET, PIOX VIH1 5 Input High Voltage2 6 Output Low Voltage1 7 Output Low Voltage2 USB_D+, USB_D-

PIOX USB_D+, USB_D-

8 Output High Voltage1 PIOX Typ. 3.3 Max. 3.45 0.8 0.8 VDD_3.3V

+0.3

0.4 0.3

Unit V V V V V V V V Remark IOL=4mA IOH =-4mA

(120)

(42)

(13)

(9)

(44)

(45)

(10)

(11) USB_D+, USB_D-

Continuous Rx Sniff mode (Slave only) Standby mode Send DM1packet (Master) Receive DM1packet (Slave) Hold mode (Slave only) Park mode (Slave only) 9 Output High voltage2 10 Peak current 11 Average current1 12 Average current2 13 Average current3 14 Average current4 15 Average current5 16 Average current6 Notes:

1. Sniff mode parameter. Max interval 0050h Min interval 0010h Attempt 0005h Timeout 0005h 2. Park mode parameter. Max interval 0100h Min interval 0010h 3. The consumption current might fluctuate with the condition of radio communication, host performance V mA Notes 3, 4 mA Notes 1, 3, 4 mA Notes 3, 4 mA Notes 3, 4 mA Notes 3, 4 mA Notes 3, 4 mA Notes 2, 3, 4

and test circuit. 4. The value may fluctuate several (mA) depending on Firmware version. TAIYO YUDEN 7/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-A080137 (2/3) AC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Condition Symbol Min 1 VDD_3.3V Rise Time from 0V to Parameter t1 0 3.15V Control name Electrical characteristics 2 VDD_3.3V=3.15V to /RESET High 3 4

/RESET High to Module Ready

/RESET pulse width 5 DETACH High to USB I/F High-Z 6 DETACH Low to USB I/F Active 7 8

/RESET High to /RESET Low

/RESET Low to USB_I/F High-Z 9 Module Active to /RESET Low t2 t3 t4 t5 t6 t7 t8 t9 10 6 0 3000 0 0 Typ Max Unit Remark 2 ms Note 1 ms Note 2

( 300 ) 3000 ms Notes 3, 4 130 10 10 ms ms ms ms Note 5 ms ms Note 5

/RESET Low to VDD_3.3V Off 10 Notes:

1. This module has an internal EEPROM and a function to erase/sort unnecessary data if certain HCI commands are t10 ms 0 issued and consume more than a certain level of free space in the EEPROM. This operation occurs at every module initialization (power-on). If supply voltage becomes non-defined states during initialization or writing in EEPROM, data in EEPROM might be destroyed. If the data in EEPROM is destroyed, module will not work correctly. Therefore please be sure to stabilize power source before /RESET release. In addition please design module peripheral circuits to avoid temporary blackout of power source during operation. Please refer HD-AE-C 080137 for HCI command which rewrites flash memory data. 2. Input /RESET signal of 10ms and more in condition of VDD_3.3V at over 3.15V. 3. When the module is ready to accept the command, its module outputs the 0F 04 00 01 00 00 (Hex) to the USB Data Line. After that, please access to the module. 4. The Typ. is a reference value. The value may change depending on the firmware version, conditions of use. 5. You dont need to wait t6 if you confirm that this module has output 0F 04 00 01 00 00 (Hex). TAIYO YUDEN 8/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-A080137 (3/3) Control name Electrical characteristics t2 t7 t1 t4 t3 t9 t8 Active t5 Active t6 Active Timing Diagram for Power Up Sequence t10 VDD_3.3V

/RESET USB_DETACH USB_I/F VDD_3.3V

/RESET USB_DETACH USB_I/F Active Timing Diagram for Power Down Sequence TAIYO YUDEN 9/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-B080137 (1/2) Control name Electrical characteristics RF Specifications at Basic Rate The Specification applies for Ta=25 degrees C, VDD_3.3V=3.3V No. Parameter Symbol Min Condition FREQ 2400 1 Frequency band 2 PO Tx power 3 Modulation dF1: F0(11110000) M1 4 Modulation 5 Modulation dF2: AA(10101010) M4 characteristics 1 characteristics 2

-6 140 dF2/dF1 MC 115 0.8 spurious spurious 7 6 characteristics 3 In-band emission 2 In-band emission 3 Initial Carrier 8 Frequency 9 Frequency Drift 1 10 Frequency Drift 2 11 Drift rate 12 C/I co-channel 13 C/I 1MHz 14 C/I 2MHz 15 C/I >= 3MHz 2MHz(|M-N|=2) 3MHz or greater

(|M-N|>=3) DH1 DH3,DH5 DH1,DH3,DH5 16 C/I Image 17 C/I Image +/- 1MHz 18 Out-of-Band Blocking 1 19 Out-of-Band Blocking 2 20 Out-of-Band Blocking 3 21 Out-of-Band Blocking 4 Level 22 Maximum Input 23 20dB Bandwidth 24 Sensitivity-single 30MHz to 2000MHz f=2460MHz 2000 to 2399MHz f=2460MHz 2484 to 3000MHz f=2460MHz 3000MHz to 12.75GHz f=2460MHz DH1 ISE1 ISE2 ICF FD1 FD2 DR CIC CI1 CI2 CI3 CI4 CI5 OBB1 OBB2 OBB3 OBB4

-75

-25

-40 MAXP -20 B20 SEN1 25 Sensitivity-multi DH3,DH5 SEN2 Unit Remark Typ Max 0 2483.5 MHz dBm

+4 175 kHz kHz dBm dBm kHz kHz kHz Hz/us dB dB dB dB

-60dBm

-60dBm

-60dBm

-67dBm

-3MHz offset

-67dBm dB

-67dBm dBm BER<=0.1 dBm BER<=0.1 dBm BER<=0.1 dB

dBm BER<=0.1

dBm BER<=0.1 MHz dBm BER<=0.1 dBm BER<=0.1

-20

-40

+75

+25

+40 400 11 0

-30

-40

-9

-20

-10

-27

-27

-10 1

-70

-70 TAIYO YUDEN 10/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-B080137 (2/2) Control name Electrical characteristics Condition RF Specifications at EDR The Specification applies for Ta=25 degrees C, VDD_3.3V =3.3V No. Parameter 1 2 3 4 5 6 7 Symbol Min RDE1 RDE2 PDE1 PDE2 D991 D992 EISE1 Pai/4DQPSK 8DPSK Pai/4DQPSK 8DPSK Pai/4DQPSK 8DPSK

|M-N|=1 26 RMS DEVM 1 RMS DEVM 2 Peak DEVM 1 Peak DEVM 2 99% DEVM 1 99% DEVM 2 EDR In-band spurious emission 1 EDR In-band spurious emission 2 EDR In-band spurious emission 3 8 power 9 10 EDR Initial Carrier Frequency 11 EDR Drift 12 Relative transmit 13 Actual Sensitivity 14 BER Floor Performance 15 C/I co-channel 16 C/I 1MHz 17 C/I 2MHz 18 C/I >= 3MHz Level

|M-N|=2

|M-N|=3 PDPSK 2-DH5(3-DH5) 16000000bit 2-DH5(3-DH5) 160000000bit 2-DH5 2-DH5 2-DH5 2-DH5 19 C/I Image 20 C/I Image +/- 1MHz 21 C/I co-channel 22 C/I 1MHz 23 C/I 2MHz 24 C/I >= 3MHz 25 C/I Image 2-DH5 2-DH5 3-DH5 3-DH5 3-DH5 3-DH5 3-DH5 26 C/I Image +/- 1MHz 27 Maximum Input Level 2-DH5(3-DH5) 3-DH5 Note:

Bluetooth standard Ver 2.1+EDR conformity EISE2 EISE3 EICF ED RTP ESEN FSEN 2CIC 2CI1 2CI2 2CI3 2CI4 2CI5 3CIC 3CI1 3CI2 3CI3 3CI4 3CI5 EMAX P

-75

-10 PGFSK

-4

-20 Typ Max Unit Remark 0.20 0.13 0.35 0.25 0.30 0.20

-20

-40

+75

+10 PGFSK

+1

-70

-60 13 0

-30

-40

-7

-20 21 5

-25

-33 0

-13 dB dBm dBm kHz kHz dB dBm BER= 10-4 dBm BER= 10-5 dB dB dB dB

-60dBm

-60dBm

-60dBm

-67dBm

-67dBm

-3MHz offset

-67dBm

-60dBm

-60dBm

-60dBm

-67dBm

-67dBm

-3MHz offset

-67dBm dB dB dB dB dB dB dB dB dBm TAIYO YUDEN 11/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (1/11) Supported HCI Commands / HCI Events The Bluetooth functions of this module is as written in the attached PICS. Depending on firmware version Upgrade, the Bluetooth functions are subject to change without notice. Control name Electrical characteristics Firmware Version 23E (Build5276) OpCode HCI COMMAND LIST Command Description Command Device Setup HCI _Reset Controller Flow Control 0x0C03 Group 3 3 HCI _Read _Buffer _Size 0x1005 4 5 Controller Information HCI _Read _Local _Version _ Information 0x1001 4 HCI _Read _Local _Supported _Commands HCI _Read _Local _Supported _Features HCI _Read _Local _Extended _Features HCI _Read _BD _ADDR Controller Configuration HCI _Read _Local _Name HCI _Write _Local _Name HCI _Read _Class _of _Device HCI _Write _Class _of _Device HCI _Read _Number _Of _Support _IAC 0x1002 0x1003 4 4 0x1004 4 0x1009 4 0x0C14 0x0C13 0x0C23 0x0C24 0x0C38 HCI _Read _Current _IAC _LAP 0x0C39 HCI _Write _Current _IAC _LAP 0x0C3A HCI _Read _Scan _Enable HCI _Write _Scan _Enable 0x0C19 0x0C1A 3 3 3 3 3 3 3 3 3 1 2 3 4 9 14 13 23 24 38 39 3A 19 1A Parameters Returns Status Notes Page number Local Name Class of Device Num Current IAC IAC LAP [I]

Scan Enable States Status HC ACL Data Packet Length HC Synchronous Data Packet Length HC Total Num ACL Data Packets HC Total Num Synchronous Data Packets Status HCI Version HCI Revision LMP Version Manufacturer Name LMP Subversion Status Supported Commands Status LMP Features Status Page number Maximum Page Number Extended LMP Features Status BD ADDR States States States Class of Device States States Num Support IAC States Num Current IAC IAC LAP [I]

States States Scan Enable States Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 12/39 EYTMECS Control No. HD-AE-C080137 (2/11) Device Discovery HCI _Inquiry HCI _ Inquiry_ Cancel 0x0401 0x0402 1 1 HCI_ Periodic_ Inquiry _Mode 0x0403 1 HCI _Exit _Periodic _Inquiry _Mode 0x0404 HCI _Read _Inquiry _Scan _Activity 0x0C1D HCI _Write _Inquiry _Scan _Activity HCI _Read _Inquiry _Scan _Type HCI _Write _Inquiry _Scan _Type HCI _Read _Inquiry _Mode HCI _Write _Inquiry _Mode HCI_Read_Inquiry_Response _Transmit_Power_Level HCI_Write_Inquiry_Transmit_Powe r _Level 0x0C1E 0x0C42 0x0C43 0x0C44 0x0C45 0x0C58 0x0C59 1 3 3 3 3 3 3 3 3 HCI_Read_Extended_Inquiry_ Response 0x0C51 3 HCI_Write_Extended_Inquiry_ Response 0x0C52 3 Connection Setup HCI _Create_ Connection 0x0405 1 HCI _Accept _Connection _Request 0x0409 HCI _Reject _Connection _Request 0x040A HCI _Create _Connection _Cancel 0x0408 1 1 1 HCI _Disconnect 0x0406 1 HCI _Read _Page _Timeout HCI _Write _Page _Timeout 0x0C17 0x0C18 HCI _Read _Page _Scan _Activity 0x0C1B HCI _Write _Page _Scan _Activity 0x0C1C 3 3 3 3 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control name Electrical characteristics LAP Inquiry Length Num Responses Max Period Length Min Period Length LAP Inquiry Length Num Responses Inquiry Scan Interval Inquiry Scan Window Scan Type Inquiry Mode TX_Power FEC_Required Extended_Inquiry_ Response BD ADDR Packet Type Page Scan Repetition Mode Reserved Clock Offset Allow Role Switch BD ADDR Role BD ADDR Reason BD ADDR Connection Handle Reason Packet Type Page Timeout Page Scan Interval Page Scan Window Status Status Status States Inquiry Scan Interval Inquiry Scan Window States Status Scan Type Status Status Inquiry Mode Status Status TX_Power Status Status FEC_Required Extended_Inquiry_ Response Status Status BD ADDR States Page Timeout States States Page Scan Interval Page Scan Window States 1 2 3 4 1D 1E 42 43 44 45 58 59 51 52 5 9 A 8 6 17 18 1B 1C Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 13/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (3/11) Control name Electrical characteristics HCI _Read _Page _Scan _Type HCI _Write _Page _Scan_Type HCI_Read_Connection_ Accept_Timeout HCI_Write_Connection_ Accept_Timeout Remote Information 0x0C46 0x0C47 0x0C15 0x0C16 3 3 3 3 46 47 15 16 Page_Scan_Type Conn_Accept_Timeout States Page_Scan_Type States Status Conn_Accept_Timeout Status BD ADDR Page Scan Repetition Mode Page Scan Mode Clock Offset BD_ADDR Connection Handle Connection Handle Page_Number Connection Handle Connection Handle Transmit Bandwidth Receive Bandwidth Max Latency Voice Setting Retransmission Effort Packet Type BD ADDR Transmit Bandwidth Receive Bandwidth Max Latency Content Format Retransmission Effort Packet Type BD ADDR Voice setting Erroneous_Data_Reporti ng Status BD_ADDR States Voice Setting States Status Status Erroneous_Data_ Reporting HCI _Remote _Name_ Request 0x0419 1 19 HCI _Remote _Name _Request _Cancel HCI _Read _Remote _Supported _Features HCI _Read _Remote _Extended _Features HCI _Read _Remote _Version _Information Synchronous Connections 0x041A 0x041B 0x041C 0x041D 1 1 1 1 1A 1B 1C 1D HCI _Setup _Synchronous _Connection 0x0428 1 28 HCI _Accept _Synchronous _Connection _Request 0x0429 1 29 0x042A 0x0C25 0x0C26 0x0C5B 0x0C5A 1 3 3 3 3 2A 25 26 5B 5A HCI _Reject _Synchronous _Connection _Request HCI _Read _Voice _Setting HCI _Write _Voice _Setting HCI_Write_Default_Erroneous_Dat a_Reporting HCI_Read_Default_Erroneous_Dat a_Reporting Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No TAIYO YUDEN 14/39 EYTMECS Control No. HD-AE-C080137 (4/11) Connection State HCI _Hold _Mode 0x0801 2 HCI _Sniff _Mode 0x0803 2 HCI _Exit _Sniff _Mode HCI _Park _State HCI _Exit _Park _State 0x0804 0x0805 0x0806 HCI _Read _Link _Policy _Settings 0x080C 2 2 2 2 HCI _Write _Link _Policy _Settings 0x080D 2 HCI _Read _Default _Link _Policy _Settings 0x080E 2 HCI _Write _Default _Link _Policy_Settings 0x080F HCI _Read _Hold _Mode _Activity 0x0C2B HCI _Write _Hold _Mode _Activity Piconet Structure 0x0C2C 2 3 3 HCI _Role _Discovery 0x0809 2 0x080B 2 HCI _Switch _Role Quality Service HCI _Flow _Specification HCI _QoS _Setup HCI _Flush 0x0C08 3 0x0810 2 10 0x0807 2 1 3 4 5 6 C D E F 2B 2C 9 B 7 8 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control name Electrical characteristics Connection Handle Hold Mode Max Interval Hold Mode Min Internal Connection Handle Sniff Max Interval Sniff Min Interval Sniff Attempt Sniff Timeout Connection Handle Connection Handle Beacon Max Interval Beacon Min Interval Connection Handle Connection Handle Connection Handle Link Policy settings Default Link Policy Settings Hold Mode Activity Connection Handle BD ADDR Role Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth Access Latency Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency Delay Variation Connection Handle States Connection Handle Link Policy Settings States Connection Handle Status Default Link Policy Settings Status States Hold Mode Activity States Status Connection Handle Current Role States Connection Handle Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 15/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (5/11) Control name Electrical characteristics HCI _Read _Automatic _Flush _Timeout HCI _Write _Automatic _Flush_ Timeout HCI _Read _Failed _Contact _Counter HCI _Reset _Failed _Contact _Counter HCI _Read _Num _Broadcast_ Retransmission HCI _Write _Num _Broadcast_ Retransmission HCI_Enhanced_Flush 0x0C27 0x0C28 0x1401 0x1402 0x0C29 0x0C2A 0x0C5F 3 3 5 5 3 3 3 27 28 1 2 29 2A 5F HCI_Sniff_Subrating 0x0811 2 11 Physical Links HCI _Read _Link _Supervision _Timeout 0x0C36 3 HCI _Write _Link _Supervision _Timeout 0x0C37 3 HCI Read _AFH _Channel _Assessment _Mode HCI Write _AFH _Channel _Assessment _Mode HCI _Set _AFH _Host _Channel _Classification HCI _Change _Connection _Packet_Type Host Flow Control 0x0C48 0x0C49 0x0C3F 0x040F 3 3 3 1 HCI _Host _Buffer _Size 0x0C33 3 33 HCI _Set _Event _Mask HCI _Set _Event _Filter HCI _Set _Controller _To _Host _Flow _Control 0x0C01 0x0C05 0x0C31 3 3 3 1 5 31 Connection Handle Connection Handle Flash Timeout Connection Handle Connection Handle Num Broadcast Retransmission Connection_Handle Packet_Type Connection_Handle Maximum_Latency Minimum_Remote_ Timeout Minimum_Local_Timeo ut States Connection Handle Flush Timeout States Connection Handle Status Connection Handle Failed Contact Counter Status Connection Handle States States Status Connection_Handle 36 37 48 49 3F F Connection Handle Connection Handle Link Supervision Timeout AFH Channel Assessment Mode AH Host Channel Classification Connection Handle Packet Type States Connection Handle Link Supervision Timeout States Connection Handle Status AFH Channel Assessment Mode Status Status Host ACL Data Packet Length Host SCO Data Packet Length Host Total Num ACL Data Packets Host Total Num SCO Data Packets Event Mask Filter Type Filter Condition Type Condition Flow Control Enable States States States States Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 16/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (6/11) Control name Electrical characteristics HCI _Host _Number _Of _Completed _Packets HCI _Read _Synchronous _Flow _Control _Enable HCI _Write _ Synchronous _Flow _Control _Enable Link Information 0x0C35 3 0x0C2E 0x0C2F 3 3 35 2E 2F Number of Handles Connection handle [I]

Host Num of Completed Packets [I]

Synchronous Flow Control Enable HCI _Read _LMP _Handle 0x0420 1 20 Connection Handle HCI _Read _Transmit _Power _Level 0x0C2D 3 2D HCI _Read _Link _Quality 0x1403 HCI _Read _RSSI HCI _Read _Clock _Offset HCI _Read _Clock 0x1405 0x041F 0x1407 5 5 1 5 HCI _Read _AFH _Channel _Map 0x1406 5 Authentication and Encryption HCI _Read _Authentication 0x0C1F _Enable HCI _Write _Authentication _Enable HCI _Read _Encryption _Mode 0x0C21 0x0C20 HCI _Write _Encryption _Mode HCI _Link _Key _Request _Reply HCI _Link _Key _Request _Negative _Reply 0x0C22 0x040B 0x040C HCI _PIN _Code _Request _Reply 0x040D HCI _PIN _Code _Request _Negative _Reply HCI _Authentication _Requested HCI _Set _Connection _Encryption HCI _Change _Connection _Link _Key HCI _Master _Link _Key 0x040E 0x0411 0x0413 0x0415 0x0417 3 3 3 3 1 1 1 1 1 1 1 1 3 5 1F 7 6 1F 20 21 22 B C D E 11 13 15 17 Connection Handle Type Connection Handle Connection Handle Connection Handle Connection Handle Which Clock Connection Handle Authentication Enable Encryption Mode BD ADDR Link Key BD ADDR BD ADDR PIN Code Length PIN Code BD ADDR Connection Handle Connection Handle Encryption Enable Connection Handle Key Flag TAIYO YUDEN States Synchronous Flow Control Enable States Status Connection Handle LMP_Handle Reseved States Connection Handle Power Level Status Connection Handle Link Quality Status Connection Handle RSSI Status Connection Handle Clock Accuracy Status Connection Handle AFH Mode AFH Channel Map States Authentication Enable States States Encryption Mode States Status BD ADDR Status BD ADDR Status BD ADDR Status BD ADDR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 17/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (7/11) Control name Electrical characteristics HCI _Read _PIN _Type HCI _Write _PIN _Type 0x0C09 0x0C0A HCI _Read _Stored _Link _Key 0x0C0D 3 3 3 HCI _Write _Stored _Link _Key 0x0C11 3 3 3 1 1 1 1 1 1 3 3 3 3 6 6 6 6 HCI _Delete _Stored _Link _Key 0x0C12 HCI _Create _New _Unit _Key HCI_User_Confirmation_Request_ Reply HCI_User_Confirmation_Request_ Negative_Reply 0x0C0B 0x042C 0x042D HCI_User_Passkey_Request_Reply 0x042E HCI_User_Passkey_Request_ Negative_Reply HCI_Remote_OOB_Data_Request _Reply HCI_Remote_OOB_Data_Request _Negative_Reply 0x042F 0x0430 0x0433 HCI_Read_Local_OOB_Data 0x0C57 0x0C56 0x0C55 0x0C53 0x1801 0x1802 0x1803 0x1804 HCI_Write_Simple_Pairing_mode HCI_Read_Simple_Pairing_mode HCI_Refresh_Encryption_Key Testing HCI _Read _Loopback _Mode HCI _Write _Loopback _Mode HCI _Enable _Device _Under _Test_Mode HCI_Write_Simple_Pairing_ Debug_mode 9 A D 11 12 B 2C 2D 2E 2F 30 33 57 56 55 53 1 2 3 4 PIN Type BD ADDR Read All Flag Num Keys To Write BD ADDR [I]

Link Key [I]

BD ADDR Delete All Flag BD ADDR BD ADDR BD ADDR Numeric_Value BD ADDR BD ADDR C (Hash C) R (Randomizer R) BD ADDR Simple_Pairing_Mode Connection_Handle States PIN Type States States Max Num Keys Num Keys Read States Num Keys Written States Num Keys Deleted Local Name States Status BD ADDR Status BD ADDR Status BD ADDR Status BD ADDR Status BD ADDR Status Status C (Hash C) R (Randomizer R) Status Status Simple_Pairing_Mode Status Loopback Mode Simple_Pairing_Debug_ Mode States Loopback Mode Status Status Status Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 18/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (8/11) Control name Electrical characteristics HCI EVENT LIST Event Description Inquiry _Complete Inquiry _Result Connection _Complete Connection _Request Disconnection _Complete Authentication _Complete Remote _Name _Request _Complete Encryption _Change Change _Connection _Link _Key _Complete Master _Link _Key _Complete Read _Remote _Supported _Features _Complete 0x0B Read _Remote _Version _Information _Complete 0x0C QoS _Setup _Complete Command _Complete 0x0D 0x0E OpCode Parameters Status Notes 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A Status Num Responses BD ADDR [I]

Page Scan Repetition Mode [I]

Page Scan Period Mode [I]

Page Scan Mode [I]

Class of Device [I]

Clock Offset [I]

Status Connection Handle BD ADDR Link Type Encryption Mode BD ADDR Class of Device Link Type Status Connection Handle Reason Status Connection Handle Status BD ADDR Remote Name Status Connection Handle Encryption Enable Status Connection Handle Status Connection Handle Key Flag Status Connection Handle LMP Features Status Connection Handle LMP Version Manufacture Name LMP Subversion Status Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency Delay Variation Num HCI Command Packets Command Opcode Return Parameters Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 19/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (9/11) Control name Electrical characteristics Command _Status Hardware _Error Flush _Occurred Role _Change Number _Of _Completed _Packets Mode _Change Return _Link _Keys PIN _Code _Request Link _Key _Request Link _Key _Notification Loopback _Command Data _Buffer _Overflow Max _Slots _Change Read _Clock _Offset _Complete Connection _Packet _Type _Change QoS _Violation Page _Scan _Repetition _Mode _Change 0x0F 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x20 Flow _Specification _Complete 0x21 Inquiry _Result _with _RSSI 0x22 Read _Remote _Extended _Features _Complete 0x23 Status Num HCI Command Packets Command Opcode Hardware Code Connection Handle Status BD ADDR New Role Number of Handles Connection Handle [I]

HC Num HCI Data Packets [I]

Status Connection Handle Current Mode Interval Num Keys BD ADDR [I]

Link Key [I]

BD ADDR BD ADDR BD ADDR Link Key HCI Command Packet Link Type Connection Handle LMP Max Slots Status Connection Handle Clock Offset Status Connection Handle Packet Type Connection Handle BD ADDR Page Scan Repetition Mode Status Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth Access Latency Num Responses BD ADDR [I]

Page Scan Repetition Mode [I]

Page Scan Period Mode [I]

Page Scan Mode [I]

Class of Device [I]

Clock Offset [I]

RSSI [I]

Status Connection Handle Page Number Maximum page number Extended LMP Features Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes No Yes Yes Yes Yes TAIYO YUDEN 20/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (10/11) Control name Electrical characteristics Synchronous _Connection _Complete 0x2C Synchronous _Connection _Changed 0x2D Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Response User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification 0x2E 0x2F 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x38 0x39 0x3B 0x3C 0x3D Status Connection Handle BD ADDR Link Type Transmission Interval Retransmission Window Rx Packet Length Tx Packet Length Air Mode Status Connection Handle Transmission Interval Retransmission Window Rx Packet Length Tx Packet Length Status Connection_Handle Maximum_Transmit_Latency Maximum_Receive_Latency Minimum_Remote_Timeout Minimum_Local_Timeout Num_Responses BD_ADDR Page_Scan_Repetition_Mode Reserved Class_of_Device Clock_Offset RSSI Extended_Inquiry_Response Status Connection_Handle BD_ADDR BD_ADDR IO_Capability OOB_Data_Present Authentication_ Requirements BD_ADDR Numeric_Value BD_ADDR BD_ADDR Status BD_ADDR Connection_Handle Link_Supervision_Timeout Connection_Handle BD_ADDR Passkey BD_ADDR Notification_Type BD_ADDR Host_Supported_Features Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN 21/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-C080137 (11/11) Control name Electrical characteristics Module Stack HOST F

I B S U USB HCI Host Transport HCI Implementation Link Manager Link Controller Base Band Radio Note:

The protocol stack in the module is compliant with the Specification of the Bluetooth System V2.1+EDR Bluetooth Module TAIYO YUDEN 22/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (1/11) Control name Electrical characteristics PICS for Firmware Version 23E (Build5276) The Bluetooth functions of this module are as below. Depending on firmware version upgrade, the Bluetooth functions are subject to change without notice. Summary ICS:

Table 21: Controller Core Specification Item Capability 5 6 Core Spec Version 2.1 Core Spec Version 2.1 + EDR (Ver. 2.1 + EDR) M.1: Mandatory to choose at least one version from Table 21. Item 1 2 3 Table 22: EDR Features Capability EDR for asynchronous transports (single slot) EDR for asynchronous transports (multi slot) EDR for asynchronous transports Status M.1 M.1 Support No Yes Status C.1 C.1 C.1 Support Yes Yes Yes C.1: For implementations supporting Ver. 2.1+EDR, the Supplier shall indicate support for one or more Enhanced Data Rate features (per specification Volume 0, Part B) in Table 22. RF Capabilities (based on PICS proforma for Radio):

Table 1: RF Capabilities Capability Item 1 2 3 4 5 6 7 8 9 10 11 Power Class =1 Power Class =2 Power Class=3 Power Control 1-slot packets supported 3-slot packets supported 5-slot packets supported 79 Channels Support for GFSK modulation Support for /4-DQPSK modulation Support for 8DPSK modulation Status M.1 M.1 M.1 C.1 M O O M M C.2 C.3 Support No Yes No Yes Yes Yes Yes Yes Yes Yes Yes M.1: Must choose One and only One Power Class C.1: Mandatory to support IF Power Class 1 is supported, ELSE Optional C.2: Mandatory IF SUM (21/4) OR SUM (21/6) is claimed, Optional IF SUM (21/3) OR SUM (21/5) is claimed, Excluded otherwise. C.3: Mandatory IF SUM (21/4) OR SUM (21/6) is claimed, Optional IF RF(1/8) AND ( SUM (21/3) OR SUM (21/5) ) are claimed TAIYO YUDEN 23/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (2/11) Control name Electrical characteristics Baseband Capabilities (based on PICS proforma for Baseband) Table 1: Physical Channel Capability Support frequency band and 79 RF channels Adaptive Frequency Hopping Kernel Table 1a: Modulation schemes Capability Basic Data Rate, 1 Mbps payload data rate Enhanced Data Rate, 2 Mbps payload data rate Enhanced Data Rate, 3 Mbps payload data rate Item 1 2 Item 1 2 3 Status M M Status M C.1 C.2 Support Yes Yes Support Yes Yes Yes C.1 Mandatory IF SUMMARY(21/6) is claimed, Optional IF SUMMARY(21/5) is claimed C.2 Mandatory IF SUMMARY(21/6) is claimed, Optional IF BB(1a/2) AND SUMMARY(21/5) are claimed Table 2: Link Types Capability Support of ACL link Support of SCO link Support of eSCO link Support of Enhanced Data Rate ACL links Support of Enhanced Data Rate eSCO links Item 1 2 3 4 5 Status M O O C.1 C.2 Support Yes Yes Yes Yes Yes C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed C.2 Mandatory IF SUMMARY(22/3) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed Prerequisite for Items (3/5-8):(2/3) (Support of eSCO link) Prerequisite for Items (3/1-4):(2/2) (Support of SCO link) Table 3: SCO Link support Item 1 2 3 4 5 6 7 8 Capability SCO links to same Slave SCO links to different Slaves SCO links from same Master SCO links from different Masters eSCO links to same Slave eSCO links to different Slaves eSCO links from same Master eSCO links from different Masters C.1: Mandatory to support at least One link (3/1 3/3) C.2: Mandatory to support at least One link (3/5 or 3/7) Item 1 2 3 4 5 Support of ID packet type Support of NULL packet type Support of POLL packet type Support of FHS packet type Support of DM1 packet type Table 4: Common packet types Capability Status C.1 O C.1 O C.2 O C.2 O Status M M M M M Support Yes Yes Yes No Yes Yes Yes No Support Yes Yes Yes Yes Yes TAIYO YUDEN 24/39 Support Yes Yes Yes Yes Yes Yes Support Yes Yes Yes Yes Yes Yes Status C.1 C.2 C.2 C.3 C.4 C.5 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (3/11) Control name Electrical characteristics Table 5: ACL packet types Capability Item 1 2 3 4 5 6 Support of DH1 packet type Support of DM3 packet type Support of DH3 packet type Support of DM5 packet type Support of DH5 packet type Support of AUX1 packet type Status M O O O O O Prerequisite: 2/4 (Support of Enhanced Data Rate ACL links) Table 5a: Enhanced Data Rate ACL Packet Types Capability Item 1 2 3 4 5 6 Support 2-DH1 packet type Support 2-DH3 packet type Support 2-DH5 packet type Support 3-DH1 packet type Support 3-DH3 packet type Support 3-DH5 packet type C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed C.2 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed C.3 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/3) is claimed C.4 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/2) AND BB(5a/4) are claimed C.5 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/3) AND BB(5a/4) are claimed Prerequisite for Items (6/1-4):(2/2) (Support of SCO link) Prerequisite for Items (6/5-7):(2/3) (Support of eSCO link) Table 6: SCO and eSCO packet types Capability Item 1 2 3 4 5 6 7 Support of HV1 packet type Support of HV2 packet type Support of HV3 packet type Support of DV packet type Support of EV3 packet type Support of EV4 packet type Support of EV5 packet type C.1 Mandatory IF only (2/2) SCO link is supported C.2 Mandatory IF only (2/3) eSCO link is supported Status C.1 O O C.1 C.2 O O Support Yes Yes Yes Yes Yes Yes Yes Prerequisite: 2/5 (Support Enhanced Data Rate eSCO links) Table 6a: Enhanced Data Rate eSCO packet types Item 1 2 3 4 Support 2 EV3 packet type Support 2 EV5 packet type Support 3 EV3 packet type Support 3 EV5 packet type Capability C.1 Mandatory IF SUMMARY(22/3) is claimed, Optional IF BB(1a/2) is claimed C.2 Optional IF BB(1a/2) is claimed C.3 Mandatory IF SUMMARY(22/3) is claimed Optional IF BB(1a/3) is claimed C.4 Optional IF BB(1a/3) is claimed TAIYO YUDEN Status C.1 C.2 C.3 C.4 Support Yes Yes Yes Yes 25/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (4/11) Control name Electrical characteristics Table 7: Page procedures Capability Support paging Support page scan

(Intentionally left blank)

(Intentionally left blank) Supports Interlaced Scan during page scan Supports mandatory scan mode Table 8: Paging schemes Capability Table 9: Paging modes Capability Supports paging mode R0 Supports paging mode R1 Supports paging mode R2 C.1: At least one of the paging scan modes must be supported. Table 9b: Paging train repetition Capability Supports Npage >= 1 Supports Npage >= 128 Supports Npage >= 256 Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses. Table 10: Inquiry procedures Capability Support inquiry Inquiry scan with first FHS

(Intentionally left blank)

(Intentionally left blank) Supports the dedicated inquiry access code Supports Interlaced Scan during inquiry scan Extended Inquiry Response Table 11: Piconet capabilities Capability Broadcast messages Point-to-multipoint connections Table 12: Scatternet capabilities Capability Act as Master in one piconet and as Slave in another piconet Act as Slave in more than one piconet Table 13: Synchronous Coding Schemes Item 1 2 3 4 5 Item 1 Item 1 2 3 1 2 3 Item Item 1 2 3 4 5 6 7 Item 1 2 Item 1 2 Item 1 2 3 4 Prerequisite: 2/2 (SCO link support) Capability A-law u-law CVSD Transparent Synchronous Data Status M M O Status M Status C.1 C.1 C.1 Status O O M Status O O O O O Status O O Status O O Status O O O O Support Yes Yes No No Yes Support Yes Support Yes Yes Yes Support Yes Yes Yes Support Yes Yes No No Yes Yes Yes Support Yes Yes Support Yes Yes Support Yes Yes Yes Yes TAIYO YUDEN 26/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (5/11) Control name Electrical characteristics Table 14: Erroneous Data Reporting Capability Erroneous Data Reporting for SCO Erroneous Data Reporting for eSCO Item 1 2 Status C.1 C.2 Support Yes Yes C.1: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6) AND HCI: 9/6) is supported, ELSE excluded. C.2: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6) AND HCI: 9/7) is supported, ELSE excluded. Table 15: This table is intentionally left blank: DO NOT USE Status Capability

(Intentionally left blank) Support No Table 16: Non-flushable Packet Boundary Flag Support Non-flushable Packet Boundary Flag Capability Status C.1 Support Yes Item 1 Item 1 C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6) AND HCI: 12/10) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6) is supported, ELSE excluded. Item 1 Sniff Subrating Mode Table 17: Connection States Capability Status C.1 Support Yes C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6) AND LMP: 2/8) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6) is supported, ELSE excluded. TAIYO YUDEN 27/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (6/11) Control name Electrical characteristics Link Manager Capabilities (based on PICS proforma for Link Manager) Item 1 2 Accept message Reject message Table 1: Response Messages Capability Table 2: Supported Features Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Capability 3-slot packets 5-slot packets Encryption Slot offset Timing accuracy Role switch (Master/Slave) Hold mode Sniff mode Park mode Power Control Channel quality driven data rate SCO link RSSI Broadcast encryption eSCO link Adaptive frequency hopping Enhanced Data Rate ACL Enhanced Data Rate eSCO Simple Pairing Status M M Support Yes Yes Status O O C.5 O O O O O O C.1 O O O O O M C.2 C.3 C.4 Support Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C.1: Mandatory IF (RF:1/1) supported, ELSE Optional C.2 Mandatory IF (SUMMARY:22/1) OR (SUMMARY:22/2) is claimed, Optional IF (SUMMARY:21/5) OR

(SUMMARY:21/6) is claimed C.3 Mandatory IF (SUMMARY:22/3) is claimed, Optional IF (SUMMARY:21/5) OR (SUMMARY:21/6) is claimed C.4 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Excluded. C.5 Optional IF (SUMMARY 2-1/1 OR SUMMARY 2-1/2 OR SUMMARY 2-1/3 OR SUMMARY 2-1/4) ELSE Mandatory. Table 3: Authentication Capability Initiate authentication before connection completed Initiate authentication after connection completed Respond to authentication request Table 4: Pairing Capability Initiate pairing before connection completed Initiate pairing after connection completed Respond to pairing request Use fixed PIN and request responder to initiator switch Use variable PIN Accept initiator to responder switch Item 1 2 3 Item 1 2 3 4 5 6 Status O O M Status O O M C.1 C.1 C.2 Support Yes Yes Yes Support Yes Yes Yes Yes Yes Yes C.1: Mandatory to support at least One, (LMP:4/4) OR (LMP:4/5) OR both C.2: Mandatory IF (LMP: 4/5) AND (LMP:4/1), OR (LMP: 4/5) AND (LMP:4/2) ) is supported. TAIYO YUDEN 28/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (7/11) Control name Electrical characteristics Item 1 2 3 4 5 6 7 Table 5: Link Keys Capability Creation of link key - Unit Key Creation of link key - Combination Key Initiate change of link key Accept change of link key

(Intentionally left blank)

(Intentionally left blank) Accept pairing with Unit Key C.1: Mandatory to support at least One - either (LMP:5/1) OR (LMP:5/2). Prerequisite: 2/3(Encryption supported) Table 6: Encryption Capability Initiate encryption Accept encryption requests

(Intentionally left blank)

(Intentionally left blank) Key size negotiation Start encryption, as master Accept start of encryption Stop encryption, as master Accept stop of encryption Encryption Pause/Resume M.1: Mandatory IF (LMP:2/3) - (Encryption) is supported. C.1: Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Optional. Table 7: Clock offset information Request clock offset information Respond to clock offset requests Capability Table 8: Slot offset information Prerequisite: 2/4 (Slot offset) Send slot offset information Capability C.1: Mandatory IF (LMP:13/1) - (Master/Slave switch) supported, ELSE Optional. Status C.1 C.1 O M O Status C.1 M.1 M.1 M.1 M.1 M.1 M.1 M.1 Support Yes Yes Yes Yes No No Yes Support Yes Yes No No Yes Yes Yes Yes Yes Yes Status O M Support Yes Yes Status C.1 Support Yes Prerequisite: 2/5 (Timing accuracy) Table 9: Timing accuracy information Item 1 2 Request timing accuracy information Respond to timing accuracy information requests Capability M.1: Mandatory IF (LMP:2/5) - (Timing Accuracy) supported Item 1 2 Table 10: LM version information Capability Request LM version information Respond to LM version information requests Status O M.1 Status O M Support Yes Yes Support Yes Yes TAIYO YUDEN 29/39 Item 1 2 3 4 5 6 7 8 9 10 Item 1 2 Item 1 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (8/11) Control name Electrical characteristics Item 1 2 3 4 Table 11: Feature support Capability Request supported features Respond to supported features requests Request extended features mask Respond to extended features Request Status C.1 M C.2 C.2 Support Yes Yes Yes Yes C.1: Mandatory IF any of the Optional features in (LMP:2/1-3), (LMP:2/5), (LMP:2/7-12), (LMP:2/14-16), (LMP:26/1) is requested by the IUT, ELSE Optional. C.2 Mandatory IF a feature requiring another features page is supported, ELSE Optional. Item 1 2 Request name information Respond to name requests Table 12: Name information Capability Table 13: Role Switch Prerequisite: 2/6(Role switch) Item 1 2 Request Master Slave switch Accept Master Slave switch requests Capability M.1 Mandatory IF LMP:(2/6) - (Role Switch) supported Item 1 Detach connection Table 14: Detach Capability Status O M Status O M.1 Support Yes Yes Support Yes Yes Status M Support Yes Status C.1 C.1 Support Yes Yes Table 14a: Setting up and Removing Enhanced Data Rate ACL Connection Item 1 2 Enter Enhanced Data Rate Exit Enhanced Data Rate Capability C.1 Mandatory IF (LMP:2/17) supported, ELSE Excluded. Table 14b: Setting up and Removing Enhanced Data Rate eSCO Connection Enter and exit eSCO using Enhanced Data Rate Packets Status C.1 Capability Support Yes Item 1 C.1 Mandatory IF (LMP:2/18) supported, ELSE Excluded. Item 1 2 3 4 Prerequisite: 2/7 (Hold mode) Table 15: Hold mode Capability Force hold mode Request hold mode Respond to hold mode requests Accept forced hold mode Status O C.1 M M Support Yes Yes Yes Yes C.1: Mandatory IF (LMP:15/1) - (Force hold mode) is supported, ELSE Optional. TAIYO YUDEN 30/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (9/11) Control name Electrical characteristics Item 1 2 3 4 5 6 7 Table 16: Sniff mode Capability

(Intentionally left blank) Request sniff mode Respond to sniff mode requests (rengotiate or reject)

(Intentionally left blank) Request un-sniff Accept un-sniff requests Sniff Subrating Mode Status O M.1 C.1 M.1 C2 C.1: Mandatory IF (LMP:16/2) - (Request sniff mode) is supported, ELSE Optional. M.1: Mandatory IF (LMP:2/8) - (Sniff Mode) is supported. C.2 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Excluded Table 17: Park mode Capability

(Intentionally left blank) Request park mode Respond to park mode requests

(Intentionally left blank) Set up broadcast scan window Accept changes to the broadcast scan window Modify beacon parameters Accept modification of beacon parameters Request Unpark using PM_ADDR Request Unpark using BD_ADDR Slave requested Unpark Accept Unpark using PM_ADDR Accept Unpark using BD_ADDR Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Status O M.1 O M.1 O M.1 C.1 C.1 O M.1 M.1 Support No Yes Yes No Yes Yes Yes Support No Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes M.1: Mandatory IF (LMP:2/9) - (Park Mode) is supported C.1: IF (LMP:17/3) - (Respond to park mode requests) is supported, THEN at least One of (LMP:17/9) - (Unpark using PM_ADDR) OR (LMP:17/10) - (Unpark using BD_ADDR) is Mandatory, ELSE Optional. Table 18: Power Control Prerequisite: 2/13 (RSSI) Prerequisite: 2/10(Power contorol) Capability Request to increase power Request to decrease power Respond when max power reached Respond when min power reached M.1: Mandatory IF (LMP:2/13) - (RSSI) is supported M.2: Mandatory IF (LMP:2/10) - (Power Control) is supported Item 1 2 3 4 Item 1 2 Table 19: Link supervision timeout Set link supervision timeout value Accept link supervision timeout setting Capability Status M.1 M.1 M.2 M.2 Support Yes Yes Yes Yes Status O M Support Yes Yes TAIYO YUDEN 31/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (10/11) Control name Electrical characteristics Table 20: Quality of Service Capability Channel quality driven change between DM and DH packet types Force/Request change of Quality of Service Request change of Quality of Service Status C.1 M M Support Yes Yes Yes C.1: Mandatory IF support of (LMP:2/11) is stated in the feature request, ELSE Optional. Prerequisite: 2/12 (SCO links) Table 21: SCO Links Capability Status Support 1 2 3 4 5 6 7 Initiate SCO links, as Master Initiate SCO links, as Slave Accept SCO links Remove SCO links, as Master Remove SCO links, as Slave Negotiate SCO link parameters, as Master Negotiate SCO link parameters, as Slave O O O C.1 C.2 C.3 C.4 C.1: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) is supported, ELSE Optional. C.2: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) is supported, ELSE Optional. C.3: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Yes Yes Yes Yes Yes Yes Yes Optional. C.4: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Optional. Table 22: Multi-Slot packages Capability Accept maximum allowed number of slots to be used Request maximum number of slots to be used Accept request of maximum number of slots to be used C.1: Mandatory IF (LMP:2/1) AND/OR (LMP:2/2) is supported in the feature request, ELSE Optional. Table 23: Paging scheme Capability Request page mode to use Accept suggested page mode Request page scan mode to use Accept suggested page scan mode Table 24: Connection Establishment Capability Create connection for higher layers Respond to requests to establish connections for higher layers Indicate that link set-up is completed Table 25: Test Mode Capability Activate test mode Ability to reject activation of test mode if test mode is disabled Control test mode Ability to reject test mode control commands if test mode is disabled. TAIYO YUDEN Status C.1 C.1 C.1 Status O O O O Status M M M Status O M O M Support Yes Yes Yes Support Yes Yes Yes Yes Support Yes Yes Yes Support Yes Yes Yes Yes 32/39 Item 1 2 3 Item Item 1 2 3 Item 1 2 3 4 Item 1 2 3 Item 1 2 3 4 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AE-D080137 (11/11) Control name Electrical characteristics Table 26: Adaptive Frequency Hopping Prerequisite: 2/20(AFH) Item 1 2 3 4 5 6 Capability Support of AFH switch as master Support of AFH switch as slave Support of Channel Classification reporting as master Support of Channel Classification reporting as slave Support channel classification from host Support of Channel Classification C.1: Optional IF (LMP:26/6) is supported, ELSE Excluded. C.2: Mandatory IF (LMP:26/6) is supported, ELSE Excluded. C.3: Mandatory IF (LMP:26/1) OR (LMP:26/4) is supported, ELSE Optional. M.1: Mandatory IF (LMP:2/20) - (AFH) supported Status O M C.1 C.2 C.3 O Support Yes Yes Yes Yes Yes Yes Table 27: This Table is intentionally left blank Capability Item 1 2 3 4 This line is intentionally blank. This line is intentionally blank. N/A N/A Status O O O O Support No No No No TAIYO YUDEN 33/39 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Connector GND USB D+

USB D-

PIO4/ BT_PRIORITY

/CH_CLK GND(DETECT)

/RESET PIO6/ WLAN_ACTIVE

/CH_DATA VDD_3.3V PIO1/USB_DETACH GND 1 2 3 4 5 6 7 8 9 1 0 EYTMECS Control No. HD-MC-A080137 (1/1) Control name Circuit Schematic Block Diagram Antenna Balun filter CRYSTAL 26 MHz 16KB EEPROM Baseband Micro controller RF Bluetooth Device LDO TAIYO YUDEN 34/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AD-A080137 (1/1) Control name Outline/Appearance Unit: mm, Tolerances unless otherwise specified: +/-0.2mm max0.5 max5.4 18.2+/-0.1 Shielding case 1 10 2.0+/-0.1 R1.0+/-0.1 3.5 2

. 5 1 5

. 0 1 3

. 0

0

. 1 1 0

. 0

0

. 3 6

. 0

0 3 5

. 7 5

0 3

. 3.0 3.7+/-0.35 15.2+/-0.3 28.0+/-0.35 31.0 4.0+/-0.3 Indication label Note:

Outline/Appearance data is PRELIMINARY, not guaranteed and subject to change without notice. Please contact Taiyo Yuden for the details of module mountings. TAIYO YUDEN 35/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Control No. HD-AD-B080137 (1/1) Control name Outline/Appearance Unit: mm R2.9 TBD 29.0 Material: PET ( UL969 ) / Label color : White Indication label 5.45 5

. 2 1 3

. 8 TAIYO YUDEN 36/39 EYTMECS Control No. HD-BA-A080137 (1/1) Control name Pin Layout 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative Pin Descriptions Terminal No. 1 2 3 4 5 6 7 8 9 Terminal name Input/Output Description Remark GND USB_D+

USB_D-

PIO4/

(BT_PRIORITY/

CH_CLK) GND(DETECT)

/RESET PIO6/

(WLAN_ACTIVE/

CH_DATA) VDD_3.3V PIO1/USB_DETA CH

Ground Input/Output USB data (Positive) input-output Input/Output USB data (Negative) input-output Output BT_Priority/CH_CLK output for Co-existence signaling

Input Input Input Input DETECT Active low RESET signal with internal weak pull-up WLAN_Active/CH_Data input for Co-existence signaling DC3.3V Power supply DETACH signal input Low USB connect High USB disconnect Note 2 Note 3 Note 2 Note 1 Note 2 10 GND

Ground Notes:

1. Pin8 (VDD_3.3V) is used for power supply of BT module. (MAX 200mA). To fill the standard of Supply voltage ripple and spike noise, the capacitor, which has the capacity of 2.2uF or more , should be put in the terminal VDD_3.3V outside as a bypass capacitor . 2. Strength pull-downs (pull-ups) are equivalent to a few kOhms resistance, but are more accurately modeled as a 40uA current drain (source) 3. Weak pull-ups can be thought of 1M Ohm connections to VDD, but are more accurately modeled as a -1uA current source. TAIYO YUDEN 37/39 EYTMECS 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative FCC Regulatory Information CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may Cause undesired NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. operation. the device. brouillage est susceptible de compromettre le fonctionnement du dispositif. Canada Regulatory Information Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :

(1) il ne doit pas produire de brouillage et

(2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce R&TTE Directive Information Hereby Taiyo Yuden Co., Ltd., declares that this Complete Class2 Bluetooth Module (Model No.:

EYTMECS) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC The declaration of Conformity may be obtained at;

Taiyo Yuden Co., Ltd. 8-1 Sakae-Cho, Takasaki-Shi Gunma, JAPAN 370-8522 Telephone No.) 81-27-324-2313; Fax No.)81-27-324-2314. TAIYO YUDEN 38/39 EYTMECS Caution 6-Dec.-2008 Ver.0.5 TAIYO YUDEN Confidential

& Tentative

- Please note that this users manual should not be provided to end-users.

- Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the requirement. Notice operation. FCC Regulatory information Canada Regulatory information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may Cause undesired CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.

- At the installation of our Complete Class2 Bluetooth Module (Model No.: EYTMECS) into the device, following information should be provided with end-user under the responsibility of the manufacture who integrates it into their device. The following sentence has to be displayed on the outside of the device in which the module is installed:

"Contains Transmitter Module FCC ID: RYYEYTMECS / IC ID: 4389B-EYTMECS", or

"Contains FCC ID: RYYEYTMECS / IC ID: 4389B-EYTMECS "

Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC

(*) Note: Please write in your company name and type of equipment into [ ]. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :

(3) il ne doit pas produire de brouillage et l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Operation is subject to the following two conditions:

(3) this device may not cause interference, and

(4) this device must accept any interference, including interference that may cause undesired operation of R&TTE Directive information the device. TAIYO YUDEN 39/39 U.S. Regulatory Wireless Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2006/8/16 v1.0 This device is intended only for OEM integrators under the following conditions:

The transmitter module may not be co-located with any other transmitter or antenna, As long as above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: Contains FCC ID: RYYEYTMECS. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Canadian Regulatory Wireless Notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device 2006/8/16 v1.0 IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

- EN60950-1:2006 Safety of Information Technology Equipment

- EN50371 : 2002

- Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) --

General public

- EN 300 328 V1.7.1: (2006-10)

- Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;

Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1:

Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility

(EMC) standard for radio equipment and services; Part 1: Common technical requirements

- EN 301 489-17 V1.2.1 (2002-08)

- Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility

(EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. 2006/8/16 v1.0 In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 0560 esky

[Czech]

Dansk

[Danish]

Deutsch

[German]

Eesti

[Estonian]

English Espaol

[Spanish]

[Greek]

Franais

[French]

Italiano

[Italian]

Latviski

[Latvian]

Lietuvi

[Lithuanian]

Nederlands

[Dutch]

Malti

[Maltese]

[Jmno vrobce] tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp = type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

[name of manufacturer] [type of equipment]

1999/5/. Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotja nosaukums] deklar, ka [type of equipment /

iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. 2006/8/16 v1.0 Magyar

[Hungarian]

Polski

[Polish]

Portugus

[Portuguese]

Slovensko

[Slovenian]

Slovensky

[Slovak]

Suomi

[Finnish]

Svenska

[Swedish]

Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE.

[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.

[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.

[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint]

tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. 2006/8/16 v1.0