Bluetooth + Wireless LAN Module IEEE802.11b/g/n Bluetooth 3.0 User Manual Part Number WYAAAVDXA1 Please read this manual before the operation. Leer el manual antes de instalar u operar Please note that this user manual should not be provided to end-users. DATEJul. 05, 2012 Submitted by TAIYO YUDEN CO., LTD. User Manual Document constituent list Control name Control No. APPROVED CHECKER DRAWN DESIGNE 2012.07.05 Document page 5 55 2 22 General items Absolute maximum ratings Electrical characteristics Electrical characteristics OutlineAppearance Pin layout Handling Precaution Rev. record Initial Release 28-Jun.-2012> Ver.1.0 2012.06.28> Ver1.0 28-Jul.-2012> Ver1.1 Change General items 2012.07.05> Ver1.1 TAIYO YUDEN Co.,Ltd. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 2012.07.05 Scope This specification (Specification) applies to the hybrid IC WYAAAVDXA-1 for use Wireless LAN and Bluetooth Module (Product) manufactured by TAIYO YUDEN Co.,Ltd. (TAIYO YUDEN)
() Wireless LANBluetooth IC WYAAAVDXA-1 () Description Part Number : WYAAAVDXA-1
: WYAAAVDXA-1 Function : Radio frequency transceiver Module (IEEE802.11bgn standard conformity)
(Bluetooth3.0 standard conformity)
: IEEE802.11bgn (Bluetooth3.0 ) Application : DSC
Structure : Hybrid IC loaded with silicon and Gallium arsenide monolithic semiconductor
Containment of hazardous substance in this Product
*This product conforms to RoHS Directive (2002/95/EC).
*RoHS (2002/95/EC) Terminal : Data input-output : 19pin FPC Connector 503566-1900 (MOLEX)
: : 19 FPC 503566-1900 (MOLEX) b. Instruction for Use (CAUTION) i) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
'La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada 2 (1)
(2) ii) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. iii) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with wireless technology. TAIYO YUDEN Co.,Ltd. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 2012.07.05 iv) This Product mentioned in this Specification is manufactured for use in DSC. Before using this product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability suitability, or fitness for particular purpose of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. DSC v) Japan Regulatory Information This product with a specific antenna is a radio system approved for Type Approval. Please follow the instructions below on designing your product. a) Please notify clearly below sentences, on your product or in the product manual. This product has a radio system which was approved as a radio station in a low power data communication system based on the Radio Law. Name of the radio system: 001-A00130 001-A00130 b) Please design your set structure in which this module can be easily attached and taken off. c) This module is certified by Type Approval as the device which has SDIO Interface. Please do not use other purposes except that of certified. Please contact TAIYO YUDEN for more details of purposes of this product. SDIO vi) Canada Regulatory Information a) This device complies with Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. TAIYO YUDEN Co., Ltd Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 2012.07.05 IC RSS 2
(1)
(2) b) This product is certified as type of the portable device with Industry Canada in the specific host platform only. To maintain compliance with SAR requirement, please use within specification of this product. Please refer the following for more details. Model. No. 1gSAR[mW / g] (MAX) M81 0.866 SAR Model. No. M81 1gSAR[mW / g] (MAX) 0.866 c) Please notify certified ID by either one of the following method in your product. ID
-Contains Transmitter module IC : 4389B-WYAAAVD
-Contains IC : 4389B-WYAAAVD vii) FCC Regulatory Information FCC a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC 15 2
(1)
(2) b) Please notify certified ID by either one of the following method. ID
-Contains Transmitter Module FCC ID: RYYWYAAAVD
-Contains FCC ID: RYYWYAAAVD c) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment d) This product is certified as type of the portable device with the FCC Rules in the specific host platform only. To maintain compliance with SAR requirement, please use within specification of this product. Please refer the following for more details. Model. No. M81 1gSAR[mW / g] (MAX) 0.866 SAR Model. No. M81 1gSAR[mW / g] (MAX) 0.866 TAIYO YUDEN Co., Ltd Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 2012.07.05 e) Please describe contents mentioned below in users manual of your company. CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. viii) CE Regulatory Information CE
(a) This device is a 2.4GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. France Outdoor use limited to 10mW e.i.r.p. within the band 2454-2483.5MHz. Italy For private use, a general authorization is required if WAS/RLANs are used outside own premises. For public use, a general authorization is required EU EFTA 2.4GHz 2454 2483.5MHz e.i.r.p. 10mW WAS/RLANs( LAN )
(b) This product is intended to be used in the following countries. Cyprus (South) Austria Belgium Denmark Finland France Germany Great Britain Greece Ireland Italy Luxembourg Malta Netherlands Portugal Spain Sweden Bulgaria Czech Republic Hungary Latvia Lithuania Poland Romania Slovakia Slovenia Estonia Liechtenstein Iceland Norway Switzerland San Marino Monaco Vatican Andorra Turley Croatia Macedonia
(c) Please notify clearly below marks on your product. TAIYO YUDEN Co., Ltd Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 2012.07.05
[Bulgarian]
[Czech]
esky Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvi
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Romn
[Romanian]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
[TAIYO YUDEN] , [WYAAAVDXA-1]
1999/5/.
[TAIYO YUDEN] tmto prohlauje, e tento [WYAAAVDXA-1] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [TAIYO YUDEN] erklrer herved, at flgende udstyr [WYAAAVDXA-1]
overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [TAIYO YUDEN], dass sich das Gert [WYAAAVDXA-1] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [TAIYO YUDEN] seadme [WYAAAVDXA-1] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [TAIYO YUDEN], declares that this [WYAAAVDXA-1] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [TAIYO YUDEN] declara que el [WYAAAVDXA-1] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[TAIYO YUDEN] [WYAAAVDXA-1]
1999/5/. Par la prsente [TAIYO YUDEN] dclare que l'appareil [WYAAAVDXA-1] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [TAIYO YUDEN] dichiara che questo [WYAAAVDXA-1] conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [TAIYO YUDEN] deklar, ka [WYAAAVDXA-1] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo [TAIYO YUDEN] deklaruoja, kad is [WYAAAVDXA-1] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [TAIYO YUDEN] dat het toestel [WYAAAVDXA-1] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [TAIYO YUDEN], jiddikjara li dan [WYAAAVDXA-1] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [TAIYO YUDEN] nyilatkozom, hogy a [WYAAAVDXA-1] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [TAIYO YUDEN] owiadcza, e [WYAAAVDXA-1] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[TAIYO YUDEN] declara que este [WYAAAVDXA-1] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Prin prezenta, [TAIYO YUDEN], declar c aparatul [WYAAAVDXA-1] este n conformitate cu cerinele eseniale i cu alte prevederi pertinente ale Directivei 1999/5/CE.
[TAIYO YUDEN] izjavlja, da je ta [WYAAAVDXA-1] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.
[TAIYO YUDEN] tmto vyhlasuje, e [WYAAAVDXA-1] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[TAIYO YUDEN] vakuuttaa tten ett [WYAAAVDXA-1] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [TAIYO YUDEN] att denna [WYAAAVDXA-1] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. TAIYO YUDEN Co., Ltd Control No. Absolute maximum ratings Item Supply voltage1 Supply voltage2 Supply voltage3 Storage temperature range Operation temperature range Control name Absolute maximum ratings APPROVED CHECKD DRAWN DESIGNED 2012.06.28 Symbol VCC VIO VLDO Tstg Topr Min.
-0.3
-0.3
-0.3
-30
-10 Rating Typ. Max. 5.0 25 4.0 5.0 100 80 Unit V Degrees C Degrees C Note1 Remark
*Note1 Recommendation operating range Item Supply voltage1 Supply voltage2 Supply voltage3 Symbol VCC VIO VLDO Min. 3.0 Rating Typ. 3.3 Max. 3.6 Unit Remark 1.62/2.97 1.8/3.3 1.98/3.63 V Note2 2.1 2.2 3.3
*Note2 TAIYO YUDEN Co., Ltd. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 Control No. Electrical characteristic DC Specifications Current / Power consumption The Specification applies for Topr.=25 degrees C, Supply voltage=Typical voltage Condition Parameter VIO VCC VLDO No. 1 Peak Current1 2 Peak Current2 3 Peak Current3 4 Power consumption1 Burst Tx (72Mbps) 5 Power consumption2 Continuous Rx (72Mbps) 6 Power consumption3 Burst Tx (54Mbps) 7 Power consumption4 Continuous Rx (54Mbps) 8 Power consumption5 Burst Tx (11Mbps) 9 Power consumption6 Continuous Rx (11Mbps) 10 Power consumption7 WLAN / BT Deep Sleep 11 Power consumption8 WLAN Power Save*1
(DTIM=1
=100mS) / BT Deep Sleep 12 Power consumption9 BT Send 3DH5 Packet *2 13 Power consumption10 BT Receive 3DH5 Packet *2 WLAN Deep Sleep
/ Beacon WLAN Deep Sleep Interval
*1 AP:CG-WLR300GNH(COREGA) Symbol Ip1 Ip2 Ip2 Pc1 Pc2 Pc3 Pc4 Pc5 Pc6 Pc7 Pc8 Pc9 Pc10 Min. Typ.
247 281 306 276 436 272 0.85 11.8 92 66 Max. 5 250 250 290 315 360 310 500 305
132 99 Remark Unit mA mA mA mW Duty 2.4%
mW mW Duty 25.4%
mW mW Duty 43.4%
mW mW VIO=1.8V mW VIO=1.8V mW mW
*2 The power consumption might fluctuate with the condition of radio communication, host performance and test circuit. The Typ. is a reference value may change depending on the evaluation. Digital Pad Ratings Parameter No. 1 Input Low Voltage 2 Input High Voltage 3 Output Low Voltage 4 Output High Voltage Condition SD_D[3:0], SD_CLK, SD_CMD, PDn, RESETn SD_D[3:0],SD_CMD HOST_WL_WKUP Symbol VIL VIH VOL VOH Min.
-0.3 0.8*VIO
VIO-0.4 Typ.
Max. 0.3*VIO VIO+0.3 0.4
Unit V V V V Remark TAIYO YUDEN Co.,Ltd. Control No. AC Specifications Power-on timing / SLP_CLK Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 Parameter Condition Symbol Min Typ Max Unit Remark 1 Valid Power / Clock to PDn de-asserted 2 3 4 5 Input SLP_CLK frequency Input SLP_CLK high voltage Input SLP_CLK low voltage Input SLP_CLK slew rate limit (10-90%) Tpor Tf VIH VIL SR 300 ms
-250 ppm 32.768 +250 ppm KHz 0.8 1.98 V 1.8 0.0 0.25 100 V ns Input SLP_CLK duty cycle tolerance 6
<Power-on sequence>
PDn must remain asserted for minimum of Tpor after VCC, VLDO, VIO and SLP_CLK are stable. RESETn must be inactive value (asserted high) when PDn is de-asserted. DC 80 20
VCC VLDO VIO PDn SLP_CLK
(32.768KHz) Tpor Tf External reset(RESETn), power down(PDn) Parameter 1 RESETn pulse width Conditio n Trpw Symbol Min Typ Max Unit Remark 1 ms PDn pulse width Tppw 2 Note 1: PDn and RESETn is pulled up to VIO internally. RESETn should be asserted while VCC, VLDO, VIO and SLP_CLK are stable and PDn is de-asserted (high level). 300 ms PDn should be asserted while VCC, VLDO, VIO and SLP_CLK are stable and RESETn is de-asserted (high level). For lowest current consumption, apply all power rails to WYAAAVDXA-1 during the assertion of PDn pin. TAIYO YUDEN Co.,Ltd. Control No. SDIO Interface Specifications Parameter 1 2 3 4 5 Input SDIO_CLK Frequency Input SDIO_CLK High Time Input SDIO_CLK Low Time Input SDIO_CMD, DATA[3:0] Setup time Input SDIO_CMD, DATA[3:0] Hold time 6 Output SDIO_CMD, DATA[3:0] Delay time 7 Output SDIO_CMD, DATA[3:0] Hold time Normal Mode Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 Symbol Condition Tf Tch Tcl Tsu Thd Tod Toh Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed
High Speed Min 0 0 10 7 10 7 5 6 5 2
2.5 ns Typ Max Unit Remark
25 50 MHz
14 ns ns ns ns
ns SD_CLK HOST > WiFi High Speed Mode WiFi > HOST SD_CMD SD_DATA[3:0]
SD_CMD SD_DATA[3:0]
SD_CLK HOST > WiFi SD_CMD SD_DATA[3:0]
WiFi > HOST SD_CMD SD_DATA[3:0]
Tsu Thd Tf Tch Tcl Tod Tf Tch Tcl Tsu Thd Toh Tod TAIYO YUDEN Co.,Ltd. Control No. Control name Electrical characteristics RF Specifications (WLAN 11n/72.2Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. APPROVED CHECKED DRAWN DESIGNED 2012.06.28 Condition Symbol Min Typ Max Unit Remark FREQ 2412 Po M1 M2 M3 Ft Ft EVM TOS1 TOS2 TOS3 SEN MIL ROS1 ROS2 9
-25
-25
-20
11
-69 2472 MHz 13
-20
-28
-45 25 25
-28
-36
-30
-47
-64
-57
-47 dBm dBc dBc dBc ppm ppm dB dBm dBm dBm dBm dBm dBm dBm No. Parameter 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 1st Side Lobe 2nd Side Lobe 3rd Side Lobe Rms 7 TX Out of band spurious1 30MHz to 1GHz 8 TX Out of band spurious2 9 TX Out of band spurious3 10 Rx sensitivity 11 Maximum Input Level 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz PER<10%
PER<10%
12 RX Out of band spurious1 30MHz to 1GHz 13 RX Out of band spurious2 1GHz to 12.75GHz TAIYO YUDEN Co., Ltd. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. No. Parameter Condition Symbol Min Typ Max Unit Remark 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 1st Side Lobe 2nd Side Lobe 3rd Side Lobe Rms 7 TX Out of band spurious1 30MHz to 1GHz 8 TX Out of band spurious2 9 TX Out of band spurious3 10 Rx sensitivity 11 Maximum Input Level 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz PER<10%
PER<10%
12 RX Out of band spurious1 30MHz to 1GHz 13 RX Out of band spurious2 1GHz to 12.75GHz FREQ 2412 Po M1 M2 M3 Ft Ft EVM TOS1 TOS2 TOS3 SEN MIL ROS1 ROS2 10
-25
-25
-20
12
-72 2472 MHz 14
-20
-28
-40 25 25
-25
-36
-30
-47
-65
-57
-47 dBm dBc dBc dBc ppm ppm dB dBm dBm dBm dBm dBm dBm dBm TAIYO YUDEN Co., Ltd. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage. No. Parameter Condition Symbol Min Typ Max Unit Remark 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Power up-down rump 5 Frequency tolerance 6 EVM 1st Side Lobe 2nd Side Lobe Power up Power down Peak 7 TX Out of band spurious1 30MHz to 1GHz 8 TX Out of band spurious2 9 TX Out of band spurious3 10 Rx sensitivity 11 Maximum Input Level 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz PER< 8%
PER< 8%
12 RX Out of band spurious1 30MHz to 1GHz 13 RX Out of band spurious2 1GHz to 12.75GHz FREQ 2412 Po M1 M2 TU TD Ft EVM TOS1 TOS2 TOS3 SEN MIL ROS1 ROS2 13
-25
-10
15
-86 2472 MHz 17
-30
-50 2 2 25 35
-36
-30
-47
-76
-57
-47 dBm dBc dBc us us ppm
dBm dBm dBm dBm dBm dBm dBm TAIYO YUDEN Co., Ltd. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 2012.06.28 RF Specifications (Bluetooth) Basic Rate The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. No. Parameter 1 Frequency Range Conditoin symbol Min FREQ 2402 Typ Max Unit Remark 2480 MHz 0-78ch 1MHz step 2 Initial Carrier Frequency Tolerance 3 Carrier Frequency Drift 4 Tx Power Packet : DH1 Payload : PRBS9 Packet : DH5 Payload : 101010 Packet : DH5 Payload : PRBS9 5 Modulation Characteristics 1 Packet : DH5 Payload : 11110000 6 Modulation Characteristics 2 Packet : DH5 Payload : 10101010 Packet : DH5 Payload : PRBS9 20dB Bandwidth Sensitivity 8 7 IFT CFD PO M1 M2 B20 SEN
-75
-40 3 0 0 5 75 40 kHz kHz 7 dBm 140 162 175 kHz delta F1 average 115 150 kHz delta F2 average 1 MHz
-86
-70 dBm BER<0.1%
EDR The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. No. Parameter 1 EDR Relative transmit power EDR Carrier Frequency Stability and Modulation EDR Sensitivity EDR Sensitivity 2 3 4 Condition Packet : 3-DH5 Payload : PRBS9 omega i omega I +omega o omega o RMS DEVM
/4-DQPSK RMS DEVM 8DPSK Peak DEVM
/4-DQPSK PeakDEVM 8DPSK 99% DEVM 2-DH5 16,000,000bit 3-DH5 16,000,000bit symbol Min Typ Max Unit Remark RTP
-4 STA1 STA1 STA2 RD1 RD2 PD1 PD2 DE1 ESEN ESEN
-75
-75
-10 99 0 0 0 0 0 0 0 0
-85
-81 Power DPSK -
Power GFSK Packet : 2-DH5 /
3-DH5 Payload : PRBS9 1 75 75 10 0.2 0.13 0.35 0.25 dB kHz kHz kHz
-70 dBm BER<0.01%
-70 dBm BER<0.01%
TAIYO YUDEN Co., Ltd. Control No.
( 1 / ) Control name APPROVED CHECKED DRAWN DESIGNED Outline Appearance 2012.06.28 Unit: mm, Tolerances unless otherwise specified: 0.2mm 1 0 4 4
. 0 1
. 1.80.1 5.80.1
. 2 1
M A X
. 1 4
M A X
) 24 TAIYO YUDEN Co.,Ltd. Control No.
( / ) Control name APPROVED CHECKED DRAWN DESIGNED Outline Appearance 7) 2012.06.28 2) 3) 1) 9) 4) 8) 5) 6) MaterialPET / Label color White / Printing Black PET / /
Indication Label description 1) Model WYAAAVDXA-1 2) Manufacture Nikon 3) Japan logo mark Specified logo mark 4) Japan ID 001-A00130 5) IC ID 4389B-WYAAAVD 6) FCC ID RYYWYAAAVD 7) R&TTE CE mark CE 8) Product Lot number XXX(Year, month and date) 9) Country of manufacture Made in CHINA TAIYO YUDEN Co.,Ltd. Control No. 1 / 1 Terminal layout drawing Pin Name No. 1 SLP_CLK 2 TH 3 SD_DATA0 4 SD_DATA2 5 SD_DATA1 6 SD_DATA3 7 SD_CMD 8 GND 9 SD_CLK 10 GND 11 RESETn 12 HOST-WL-WKU P 13 PDn 14 GND 15 VIO 16 VLDO 17 VLDO 18 VCC 19 VCC Control name Pin layout APPROVED CHECKED DRAWN DESIGNED 2012.06.28
(TOP VIEW) Description Sleep clock input (32.768kHz) Terminal of Thermistor SDIO DATA0 SDIO DATA2 SDIO DATA1 SDIO DATA3 SDIO Command GND SDIO CLOCK GND Reset (active low). Pulled up to VIO. WLAN -> Host wakeup I/O Vol-lvl 1.8V
I/O I
I/O VIO I/O VIO I/O VIO I/O VIO I/O VIO GND
VIO I GND
VIO I O VIO VIO I
I I I I I GND VIO VLDO VLDO VCC VCC Power Down (H: normal operation, L: power down). Pulled up to VIO. GND 1.8V/3.3V I/O Power Supply LDO Supply Voltage(2.2V) LDO Supply Voltage(2.2V) Main Supply Voltage(3.3V) Main Supply Voltage(3.3V) TAIYO YUDEN Co., Ltd Control No. HQ-BA-A111361 Control name Handling Precaution
(1/2) APPROVED CHECKED DRAWN PREPARED 2012.06.28 This document describes Handling Instructions for Taiyo Yuden module. 1. Storage conditions 1) Store the device in the range of 5~30 degrees C / 40~60%RH. 2) The device should be stored where there is no toxic gas that damages the device and little dust. 3) The device should be stored under shipping conditions 4) Dew condensation during storage can damage the device. Rapid temperature change or other factors which may cause dew condensation should be avoided. 5) Long-term storage should be avoided because package quality can be reduced or contact characteristics of device terminals may degrade. 2. Transporting Conditions 1) Avoid any mechanical vibration and shock which can damage the device.Also avoid dropping the device 2) Static charge from container friction or vibration can damage the device and should be avoided. Use a conductive shipping container or aluminum foil because shipping container or vibration can generate static charge. 3) MM Static charge from the worker (human body) can damage the device and should be avoided. The worker who handles the device should discharge static electricity through high resistance
(1M to 100Mohm) before handling the device. Taiyo Yuden Co.,Ltd Control No. HQ-BA-A111361 Control name Handling Precaution APPROVED CHECKED DRAWN PREPARED 2012.06.28
(2/2) 3. Assembly Conditions 1) The device (Module)should be attached in the proper conditions without warp and bend by externals stress not to damage in any component on the device. 2) , The device should not be reworked such as soldering or resin coating. 3) FPC FPC Connector a. b. 4. Conditions of Use 1) The device should not be used under the conditions, such as the Maximum Absolute Ratings, and for the purposes other than specified in this document. 2) The device is moisture and ionic-material sensitive. The device should not be used under the condition where dew condensation or dust attaches. Taiyo Yuden Co.,Ltd