GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Wireless LAN Module IEEE802.11b/g/n GT WYSAAVKXY User Manual In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. TAIYO YUDEN 1/26 GT WYSAAVKXY Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Pin Layout Reflow profile 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AG-A131203 HD-AM-A131203 HD-AE-A131203 HD-MC-A131203 HD-AD-A131203 HD-BA-A131203 Document Page 1/6 - 6/6 1/1 1/11 11/11 1/1 1/2 - 2/2 1/2 - 2/2 1/1 Release Rev. record 16-Jan.-2014> Ver.0.1 14-Feb-2014> Ver.0.2 General Items up date 26-Feb-2014> Ver.0.3 General Items up date vi)-b) and vii)-c) minimum separation distance: corrected from 5.9cm to 52mm TAIYO YUDEN 2/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AG-A131203 (1/6) Scope Control name General Items This specification (Specification) applies to the hybrid IC WYSAAVKXY for use Wireless LAN Module (Product) manufactured by TAIYO YUDEN CO.,LTD. (TAIYO YUDEN)
() Wireless LAN IC WYSAAVKXY () Description Part Number : WYSAAVKXY
: WYSAAVKXY Function : Radio frequency transceiver Module (IEEE802.11bgn standard conformity)
: IEEE802.11bgn Structure : Hybrid IC loaded with silicon and Gallium arsenide monolithic semiconductor
:
Containment of hazardous substance in this Product
*This product conforms to RoHS Directive (2002/95/EC).
*RoHS (2002/95/EC) Country of origin : JAPAN
:
TAIYO YUDEN 3/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AG-A131203 (2/6) Control name General Items Notes :
:
a. Limitation of Warranty i) TAIYO YUDEN provide warranties only if the Product is operated under the condition set forth in this Specification. Please note that TAIYO YUDEN shall not be liable for any defect and/or malfunction arising from use of the Product under the terms and conditions other than the operating conditions hereof. In addition when this Product is used under environmental conditions such as over voltage which are not guaranteed, it may be destroyed in short mode. To ensure the security of customers product, please add an extra fuse or/and a protection circuit for over voltage. ii) This Product is designed for use in products which comply with IEEE802.11bgn Specifications. TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with IEEE802.11bgn Specifications (the non-complying products). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. IEEE802.11bgn, IEEE802.11bgn IEEE802.11bgn b. Instruction for Use (CAUTION) i) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. TAIYO YUDEN 4/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AG-A131203 (3/6) Control name General Items ii) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with wireless technology. iii) This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 2.4GHz iv) This Product mentioned in this Specification is manufactured for use in PC peripheral and Handy terminal. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. PC TAIYO YUDEN 5/26 GT WYSAAVKXY Control No. HD-AG-A131203 (4/6) v) Japan Regulatory Information 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name General Items This product with a specific antenna is a radio system approved for Type Approval. Please follow the instructions below on designing your product. a) This module is certified by Type Approval as the device which has SDIO Interface. Please do not use other purposes except that of certified. Please contact TAIYO YUDEN for more details of purposes of this product. SDIO b) Please notify clearly below sentences, on your product or in the product manual. This product has a radio system which was approved as a radio station in a low power data communication system based on the Radio Law. Name of the radio system: 001-A02398 001-A02398 TAIYO YUDEN 6/26 GT WYSAAVKXY Control No. HD-AG-A131203 (5/6) vi) IC Regulatory Information IC 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name General Items a) This device complies with Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. IC RSS 2
(1)
(2) b) This product is certified as type of portable device with usage limitation at 52mm minimum separation distance between radiator and human body. To maintain compliance with human exposure requirement, please use and install this product into your product within the scope of the limitation. If you intend usage of this product with any construction closer than the limited distance, please contact Taiyo Yuden. 52mm c) Please notify certified ID by either one of the following method on your product. Specifiez ID certifie dans votre produit par une de mthode suivante. ID
-Contains Transmitter module IC : 4389B-WYSAAVKXY
-Contains IC : 4389B-WYSAAVKXY TAIYO YUDEN 7/26 GT WYSAAVKXY Control No. HD-AG-A131203 (6/6) vii) FCC Regulatory Information FCC 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name General Items a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC 15 2
(1)
(2) b) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment c) This product is certified as type of portable device with usage limitation at 52mm minimum separation distance between radiator and human body. To maintain compliance with human exposure requirement, please use and install this product into your product within the scope of the limitation. If you intend usage of this product with any construction closer than the limited distance, please contact Taiyo Yuden. 52mm d) Please notify certified ID by either one of the following method. ID
-Contains Transmitter Module FCC ID: RYY WYSAAVKXY
-Contains FCC ID: RYY WYSAAVKXY e) Product installs this device must be ensured compliance to all regulations to which the product applied, e.g. requirements for unintentional radiator. TAIYO YUDEN 8/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AM-A131203 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Supply voltage 1 Supply voltage 2 Supply voltage 3 Supply voltage 4 Storage temperature range Operation temperature range Symbol VIO_0 VIO_1 VIO_2 V33I Tstg Topr Min. Typ.
-
-
-
-
-40
-40 25 Rating Max. 4.0 4.0 4.0 3.6 85 85 Remark Unit V V V V Degrees C Degrees C Recommendation operating range Item Supply voltage 1 Supply voltage 2 Supply voltage 3 Supply voltage 4 Symbol VIO0 VIO1 VIO2 V33I Min. 1.62/3.0 1.62/3.0 3.0 3.0 Rating Typ. 1.8/3.3 1.8/3.3 3.3 3.3 Max. 1.98/3.6 1.98/3.6 3.6 3.6 Unit V V V V Remark TAIYO YUDEN 9/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Control No. HD-AE-A131203 (1/11) DIGITAL IO FEATURES Inter-Integrated Circuit(I2C) The I2C bus interface complies with the common I2C protocol and can operate in standard mode(with date rates up to 100Kb/s), fast mode(with data rate up to 400Kb/s) and high-speed mode(with data rate up to 2Mb/s). Additionally, high-speed mode devices and fast mode devices are downward compatible. It also supports DMA capability. WYSAAVKXY-XZ module includes three I2C interfaces: I2C0, I2C1 and I2C2, all identical in function. The I2C bus interface unit has the following features:
Three I2C serial interfaces consisting of a serial data line (SDL) and serial clock (SCL)
Three speeds:
Standard mode (up to 100Kb/s) Fast mode (up to 400Kb/s) High-speed mode (2Mb/s) interrupt operation
Clock synchronization
Master or Slave I2C operation, Multi-master, multi-slave operation, and arbitration support
7- or 10-bit addressing and General Call
7- or 10-bit combined format transfers
Bulk transmit mode in slave
16 * 32 bits deep transmit and receive buffers, respectively
DMA function support Synchronous Serial Protocol(SSP) The SSP port is a synchronous serial controller that can be connected to a variety of external Analog-to-Digital converters (ADC), audio and telecommunication CODECs, and many other devices that use serial protocols for data transfer. The SSP ports are configurable to operate in Master mode (the attached peripheral function as a slave) or Slave mode (the attached peripheral functions as a master). The SSP ports support serial bit rates from 6.3Kbps
(minimum recommended speed) up to 25 Mbps. Serial data sample size can be set to 8, 16, 18 or 32 bits in length. A FIFO is provided for Transmit data and a second, independent FIFO is provided for Receive data. The two FIFOs are both 16 x 32 bits wide or both 32 x 16 bits wide. The FIFOs can be loaded or emptied by the Cortex M3 Processor or by DMA burst transfers. The enhanced SSP port features are as follows:
Directly supports Texas Instruments Synchronous Serial Protocol (SSP), and Motorola Serial Peripheral Interface (SPI)
The I2S protocol is supported by programming the PSP I2S Phillips standard MSB-justified standard (left justified) Master or Slave mode operation Data transfer up to 25 Mbps Receive-without-Transmit operation Network mode with as many as eight time slots for PSP formats TAIYO YUDEN Programmable data frame size: 8, 16, 18, 32 bits Separate FIFO for transmit and receive with 16 x 32 or 32 x 16 bit length 10/26 26-Feb.-2014 Ver0.3 TAIYO YUDEN Independent transmit/receive in any, all, or none of the time slots GT WYSAAVKXY
Supports DMA transfer Control No. HD-AE-A131203 (2/11) Universal Asynchronous Receiver Transmitter (UART)
Programmable FIFO access mode for 16 x 8 bits transmit and receive FIFO
DMA request capability
Auto flow control support
Programmable data format:
5-8 data bits plus parity Control name Electrical characteristics Odd, even, no parity One, one-and-a-half, or two stop bits
Six interrupt type with flags:
Receiver line status Receiver Data Available Character Timeout (in FIFO mode only) Modem Status Busy Detect Indication Transmitter Holding Register Empty or FIFO at/below threshold (Programmable THRE interrupt mode enable) IrDA 1.0 SIR mode support wit up to 115200 baud rate and pulse duration (width) of 3/16x bit IrDA 1.0 SIR low-power reception capabilities
Seven additional shadow registers to be used to reduce the software overhead
Additional FIFO status registers
USBOTG Interface Controller USB interface includes one USB OTG-capable dual-role host/device controller that is compliant with the USB 2.0 specification.
Full USB OTG functionality with integrated transceiver, allowing support for an Enhanced Host Controller Interface (EHCI) host or a device
Supports Full-Speed/Low-Speed USB 2.0 Host/Device/OTG modes
Up to 16 configurable bi-directional endpoints for device mode Transfer types support: Control, Interrupt, Bulk or Isochronous Endpoint 0 dedicated for control endpoint 2KB shared Rx buffer for all incoming data
Control signals for external power supply and detection of voltages for OTG signaling
Capability to respond as self- or bus-powered device and control to allow charging from bus
Full 1KB TxFIFOs for each endpoint, which can hold the largest USB2 packet
TAIYO YUDEN 11/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Control No. HD-AE-A131203 (3/11) Analog Digital Converter (ADC) The ADC is a second order sigma-delta converter with up to 16-bit resolution. It includes an analog multiplexer
(AMUX) and a programmable gain amplifier (PGA) with configurable channels and a reference voltage generator. The conversion results can be written to memory through DMA. Several mode of operation are available for the ADC.
Selectable decimation rates with also set the effective resolution (10 to 16 bits)
Throughput rate as fast as 4us (250KHz)
Single-ended and differential conversions from 8 external and 6 internal sources
PGA setting support: 2x, 1x and 0.5x
Selectable reference voltage (Vref) Internal reference 1.2V (Vref_12) VDDA_18 External reference ( do not exceed 1.8V) Interrupt generation and/or DMA request Internal GPT trigger on ADC conversion Internal or external reference voltage Interrupt generation and/or DMA request
Offset and gain calibration
Embedded temperature sensor with internal or external diode options
DAC dual inputs
Battery measurement capability Digital Analog Converter (DAC) The main features of DAC are:
Register string-based DAC with 10-bit resolution
Throughput rate as fast as 2us (500KHz)
Capable of directly driving a piezo speaker with 1000-ohm load
Flexible waveform generator (sinusoidal, triangle, noise, etc.) at various frequency range
Selectable output mode: single-ended or differential
Three selectable output ranges
Supports event trigger from GPT or GPIO TAIYO YUDEN 12/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Control No. HD-AE-A131203 (4/11) Analog Comparator (ACOMP) ACOMP_EDGE_PULSE and ACOMP_GPIO_OUT are designed to have true rail-to-rail inputs and operate over the full voltage range of the power supply V33I. The comparator outputs are latched and can be used as interrupts. The main features of the analog comparator are as follows:
Six selectable external positive inputs
Six selectable external negative inputs
Internal positive inputs DAC output
Four selectable internal negative inputs DAC output V33I scaled by 4 selectable factors Internal reference 1.2V (Vref_12) GND Interrupt generation on selectable edges (rising edge and/or falling edge) or levels
Selectable positive and negative hysteresis between 0 and 70mV with 10mV step
Selectable response time as fast as 100ns
Configurable output when inactive
Comparator output on GPIOs through alternate functionality, output inversion available TAIYO YUDEN 13/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AE-A131203 (5/11) Control name Electrical characteristics Condition Parameter DC Specifications Peak Current / Power consumption The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage No. 1 Peak Current 2 Power consumption3 Burst Tx (72.2Mbps) 3 Power consumption4 Continuous Rx (72.2Mbps) 4 Power consumption5 Burst Tx (54Mbps) 5 Power consumption6 Continuous Rx (54Mbps) 6 Power consumption7 Burst Tx (11Mbps) 7 Power consumption8 Continuous Rx (11Mbps) Symbol Ip1 Pc3 Pc4 Pc5 Pc6 Pc7 Pc8
-
-
-
-
-
-
-
V33I Min. Typ. 480 462 500 456 680 453 Max. 500
-
-
-
-
-
-
Remark Unit mA mW Duty 4.2%
mW mW Duty 25.4%
mW mW Duty 43.4%
mW 8 Power consumption9 Sleep
(MPU: Stand By (PM2) WLAN: Deep sleep) Pc9
-
7
-
mW VIO_0=1.8V VIO1_=3.3V VIO1_=3.3V VIO1_=3.3V Digital Pad Ratings No. Parameter 1 2 3 Output high current @VIO-0.4V
@VIO-0.2V 4 Output high current
@0.4V 5 Output low current
@0.2V 6 Output low current Input high voltage Input low voltage Condition Symbol VIH VIL IOH1 IOH2 IOL1 IOL2 Min. 0.7*VIO
-0.4 4 2 4 2 Typ. Max.
-
-
-
-
-
-
VIO+0.4 0.3*VIO
-
-
-
-
Remark Unit V V mA VIO=3.3V mA VIO=1.8V mA VIO=3.3V mA VIO=1.8V TAIYO YUDEN 14/26 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics GT WYSAAVKXY Control No. HD-AE-A131203 (6/11) ADC Electrical Characteristics Parameter Condition 1 ADC conversion range 2 Absolute Input Voltage Min
-vref(1) 0 0 0 Single-ended with input buffer gain=1x or bypass gain buffer Single-ended with input buffer gain=0.5x Differential with input buffer gain=1x or
-vref bypass input gain buffer Differential with input buffer gain=0.5x
-2*vref or
-(V33I-0.2) Remark Typ
-
-
-
-
-
-
Max vref V33I Vref
+2*vref or
+(V33I-0.2) vref 2*vref or
+(V33I-0.2) Unit V V V Input Voltage Range 3 4 5 6 V V MHz Frequency Fast Mode 1.21 1.8 1.8 1.20
-
-
1.19 0
-1.8 Low Power Mode Internal Reference Voltage External Reference Voltage 8 1 32 64 128 256 Single-ended Differential Conversion Time in ADC clocks 10-bit setting 12-bit setting 14-bit setting 16-bit setting Reference Voltage 7 8 9 Conversion Rate 10 ADC Operation Clock 11 12 13 14 15 DC Accuracy 16 17
(1) vref stands for the voltage reference of ADC. It could be an internal 1.2V, 1.8V, or external voltage (<1.8V). Single-ended Differential Resolution 15 16 clocks bits TAIYO YUDEN 15/26 GT WYSAAVKXY Control No. HD-AE-A131203 (7/11) ACOMP Electrical Characteristics No. Parameter Analog Response Time Condition 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Min Typ Max Unit Remark 1 2 Absolute Analog Input Voltage Common Mode Input Range DC Offset 3 Offset Voltage Reference Voltage 4 5 Internal Voltage External Voltage Reference Reference Any Pin
( in Analog Input Mode)
-40 to 85oC 0 0
-9.7 1.18 Comparator Negative Input 0 DAC Electrical Characteristics No. Parameter 1 Voltage Range Conversion 2 Supply Voltage (1.8V) 3 Supply Voltage (3.3V) Reference Voltage Reference Reference 4 5 Internal Voltage External Voltage Conversion Rate 6 Clock source in 7 Conversion Time second DC Accuracy 8 9 10 Offset Error 11 Gain Error Resolution Condition
-40 to 85oC Divided down from32 MHz or 16MHz 10-bit settling Single-ended Differencial Min 0 1.62 0.8
-
-
1.20
-
Typ
-
1.8 3.3 16 10 5 V33I V33I V V
+8.2 mV 1.22 V33I V V Max Unit Remark VREF 1.98 1.6 V33I 2 10 10 V V V V V MHz uS bits mV
%
TAIYO YUDEN 16/26 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Min 300 1 0.16
-
-
100 0.1 Unit mS Typ Max
-
-
-
-
-
-
-
Remark
-
25 mV/uS 25 mV/uS 25 mV/uS 25 mV/uS
-
-
mS V GT WYSAAVKXY Control No. HD-AE-A131203 (8/11) AC Specifications Power-on timing Parameter Condition Symbol Tpor V33I VIO_0 Toff_VIO_0 V33I_ramp VIO_0_ramp VIO_1_ramp VIO_2_ramp Toff_VIO_0 Vbot_VIO_0 1 Valid Power to RESETN de-asserted 2 V33I Ramp Rate 3 VIO_0 Ramp Rate 4 VIO_1 Ramp Rate 5 VIO_2 Ramp Rate 6 VIO_0 Off Time 7 VIO_0 Off Voltage
<Power-on sequence>
RESETn must remain asserted for minimum of Tpor after V33I and VIO_0,1,2 are stable. RESETn Pulse Width Vbot_VIO_0 RESETN VIO_1 VIO_2 Tpor 11 RESETn Parameter RESETn pulse width Condition Trpw Symbol Min 300 Trpw Unit ms Remark Typ Max TAIYO YUDEN 17/26 GT WYSAAVKXY Control No. HD-AE-A131203 (9/11) SSP timing specification 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Electrical characteristics Parameter Symbol Condition Typ
-
-
-
-
-
-
-
-
-
-
Max Unit Remark
-
-
-
-
-
-
-
-
-
-
ns ns ns ns ns 1 TX delay time 2 3 Set up time RX valid before clock low Hold time, RX Data valid after clock low 4 Serial Bit Clock cycle time 5 Serial Clock high/low time tout(TX) tsu(RX) th(RX) Tcyc t Min 1.6 12 10 2.2 0 3.7 40 40 Master of Clock Slave to Clock Master of Clock Slave to Clock Master of Clock Slave to Clock Master of Clock Slave to Clock Master of Clock Tcyc/2-13 Tcyc/2-13 Slave to Clock SSP_SCLK SSP_SFRM SSP_TXD LSB OUT SSP_TXD tW tcyc tout(TX) MSB OUT th(RX) tsu(RX) MSB IN TAIYO YUDEN 18/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AE-A131203 (10/11) Control name Electrical characteristics RF Specifications (WLAN 11n/72.2Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. No. Parameter 1 RF frequency range 2 TX Power Symbol Min FREQ 2412 Condition 1st Side Lobe 2nd Side Lobe 3rd Side Lobe rms 30MHz to 1GHz 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz PER<10%
PER<10%
30MHz to 1GHz 1GHz to 12.75GHz Typ Max Unit Remark 12
-69 2472 MHz dBm dBc dBc dBc ppm ppm dB dBm dBm
-20
-28
-45 25 25
-28
-36
-30
-47
-64
-
-57
-47 dBm dBm dBm dBm dBm Po M1 M2 M3 Ft Ft EVM TOS1 TOS2 TOS3 SEN MIL ROS1 ROS2
-
-
-
-25
-25
-
-
-
-
-20
-
-
3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 7 TX Out of band spurious1 8 TX Out of band spurious2 9 TX Out of band spurious3 10 Rx sensitivity 11 Maximum Input Level 12 RX Out of band spurious1 13 RX Out of band spurious2 TAIYO YUDEN 19/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Condition 3 Spectrum Mask Po M1 M2 M3 Ft Ft Control name Electrical characteristics Control No. HD-AE-A131203 (11/11) RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage No. Symbol Min Parameter 1 RF frequency range 2412 FREQ 2 TX Power 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 7 TX Out of band spurious1 8 TX Out of band spurious2 1st Side Lobe 2nd Side Lobe 3rd Side Lobe rms 30MHz to 1GHz 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz 10 Rx sensitivity PER<10%
11 Maximum Input Level PER<10%
12 RX Out of band spurious1 30MHz to 1GHz 13 RX Out of band spurious2 1GHz to 12.75GHz RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage Symbol Min No. Parameter 1 RF frequency range FREQ 2412 2 TX Power
-
-
-
-25
-25
-
-
-
9 TX Out of band spurious3 SEN MIL ROS1 ROS2 EVM TOS1 TOS2
-
-20
-
-
Condition TOS3 1st Side Lobe 2nd Side Lobe Power up Power down Peak 30MHz to 1GHz 1GHz to 12.75GHz 1.8GHz to 1.9GHz 5.15GHz to 5.3GHz PER<8%
PER<8%
30MHz to 1GHz 1GHz to 12.75GHz 3 Spectrum Mask 4 Power up-down rump 5 Frequency tolerance 6 EVM 7 TX Out of band spurious1 8 TX Out of band spurious2 9 TX Out of band spurious3 10 Rx sensitivity 11 Maximum Input Level 12 RX Out of band spurious1 13 RX Out of band spurious2 Po M1 M2 TU TD Ft EVM TOS1 TOS2 TOS3 SEN MIL ROS1 ROS2
-
-
-
-
-25
-
-
-
-10
-
-
Typ Max Unit Remark 13
-72 2472 MHz dBm dBc dBc dBc ppm ppm dB dBm dBm
-20
-28
-40 25 25
-25
-36
-30
-47
-65
-
-57
-47 dBm dBm dBm dBm dBm Typ Max Unit Remark 17
-86 2472 MHz dBm dBc dBc us us ppm
%
dBm dBm
-30
-50 2 2 25 35
-36
-30
-47
-76
-57
-47 dBm dBm dBm dBm dBm TAIYO YUDEN 20/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-MC-A131203 (1/1) Control name Circuit Schematic Block Diagram TAIYO YUDEN 21/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AD-A131203 (1/2) Control name Circuit Schematic OUTLINE Unit: mm, Tolerances unless otherwise specified: +/-0.2mm TAIYO YUDEN 22/26 GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-AD-A131203 (2/2) Control name Circuit Schematic Module Pad Dimension Unit:mm 48 49 60 1 71 66 61 72 67 62 73 68 63 74 69 64 75 70 65 25 24
(TOP VIEW) TAIYO YUDEN 23/26 Pin Name I/O Type Pwr Domain Description GT WYSAAVKXY Control No. HD-BA-A131203 (1/2) No. 1 GND 2 3 4 5 JTAG_TDO JTAG_TCK JTAG_TMS JTAG_TDI JTAG_TRST 6 7 RESETn 8 RSVD 9 M_WAKEUP 10 RSVD 11 ACOMP_GPIO_OUT 12 ACOMP_EDGE_PULSE 13 SSP0_CLK 14 SSP0_FRM 15 SSP0_RXD 16 SSP0_TXD 17 SSP2_CLK 18 SSP2_FRM 19 SSP2_RXD 20 SSP2_TXD 21 SDIO_LED 22 RSVD 23 GND 24 N.C. 25 N.C. 26 GND 27 N.C. 28 GND 29 RSVD 30 RSVD 31 USB_VBUS 32 USB_ID 33 USB_DP 34 USB_DM 35 VIO_0 36 VIO_1 37 VIO_2 38 RSVD 39 V33I P O O I/O I I I
-
I
-
O O I/O I/O I O I/O I/O I O O
-
P
-
-
P
-
P
-
-
Ground GND VIO_0
-
VIO_0
-
-
VIO_0 VIO_0
-
-
-
-
-
-
-
-
-
-
-
VIO_0 VIO_0
-
VIO_0
-
VIO_1 VIO_1 VIO_1 VIO_1 VIO_1 VIO_1 VIO_1 VIO_1
-
-
-
VIO_1 VIO_1 VIO_1
-
-
-
-
-
Ground GND
-
-
Ground GND
-
Ground GND
-
-
-
-
-
-
-
-
I/O Power I I/O I/O I I I
-
I
-
-
-
Power Power Power
-
Power
-
-
-
VIO_0 VIO_1 VIO_2
-
V33I 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Pin Layout 88MC200 GPIO Pin No.
-
GPIO_20 GPIO_21 GPIO_22 GPIO_23 GPIO_24
-
-
GPIO_26
-
-
TDO for JTAG TCK for JTAG TMS for JTAG TDI for JTAG TRSTn for JTAG Active low chip reset No connect. Should be left open. Wake up signal No connect. Should be left open. ACOMP output synchronous or asynchronous level signals GPIO_29 Output pulse aligned with Synchronized comparison result GPIO_30 GPIO_32 Clock for SSP0 Frame for SSP0 GPIO_33 GPIO_34 RXD for SSP0 TXD for SSP0 Clock for SSP2 Frame for SSP2 RXD for SSP2 TXD for SSP2 LED for SDIO No connect. Should be left open.
-
No connect. Should be left open. No connect. Should be left open.
-
No connect. Should be left open.
-
No connect. Should be left open. No connect. Should be left open. VBUS selection input in device mode; unused in host mode;
input/output for OTG mode to supply +5V@10mA during session negotiation USB OTG IDPIN pad USB D+ pad USB D- pad IO power IO power IO power No connect. Should be left open. 3.3V power supply GPIO_35 GPIO_40 GPIO_41 GPIO_42 GPIO_43 GPIO_50
-
-
-
-
-
-
-
-
-
-
-
GPIO_57 GPIO_58
-
-
-
-
-
24/26 TAIYO YUDEN GT WYSAAVKXY 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control No. HD-BA-A131203 (2/2) Control name Pin Layout No. Pin Name I/O Type Pwr Domain Description P I/O I/O I O O I P P O I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O P P P P P P P P P P P P P P P Ground GND VIO_1
-
VIO_1
-
VIO_2
-
VIO_2
-
VIO_2
-
VIO_2
-
Ground GND Ground GND VIO_2
-
VIO_2
-
VIO_0
-
VIO_0
-
VIO_0
-
-
-
-
-
VIO_0 VIO_0 VIO_0 VIO_0 VIO_0
-
VIO_0
-
-
VIO_0 Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND Ground GND I2C0_SCL I2C0_SDA 40 GND 41 42 43 UART1_CTSn 44 UART1_RTSn 45 UART1_TXD 46 UART1_RXD 47 GND 48 GND 49 UART0_TXD 50 UART0_RXD 51 ADC_5 52 ADC_4 53 ADC_3_DAC 54 ADC_2 55 ADC_1 56 ADC_0 57 I2C1_SDA I2C1_SCL I2C2_SDA I2C2_SCL 58 59 60 61 GND 62 GND 63 GND 64 GND 65 GND 66 GND 67 GND 68 GND 69 GND 70 GND 71 GND 72 GND 73 GND 74 GND 75 GND
-
SCL for I2C0 SDA for I2C0 CTSn for UART1 RTSn for UART1 TXD for UART1 RXD for UART1
-
-
TXD for UART0 RXD for UART0 ADC channel 5 or Analog comparator Channel 5 ADC channel 4 or Analog comparator Channel 4 ADC channel 3 or Analog comparator Channel 3 or DA Ref or ADC Vref or DAC output ADC channel 2 or Analog comparator Channel 2 ADC channel 1 or Analog comparator Channel 1 ADC channel 0 or Analog comparator Channel 0 SDA for I2C1 SCL for I2C1 SDA for I2C2 SCL for I2C2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
88MC200 GPIO Pin No.
-
GPIO_45 GPIO_44 GPIO_59 GPIO_60 GPIO_61 GPIO_62
-
-
GPIO_74 GPIO_75 GPIO_2 GPIO_3 GPIO_4 GPIO_5 GPIO_6 GPIO_7 GPIO_8 GPIO_9 GPIO_10 GPIO_11
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TAIYO YUDEN 25/26 GT WYSAAVKXY Control No. 26-Feb.-2014 Ver0.3 TAIYO YUDEN Control name Reflow profile
(1/1) Recommented Reflow Profile 300 Temp(deg) 250 200 150 100 50 0 Peak Temp:250deg Max 230deg up : 40secMax 130-180deg Pre-heat
: 60~120sec IN OUT 26/26 TAIYO YUDEN