WYSAGVDX7 Confidential TAIYO YUDEN Wireless LAN Module WYSAGVDX7
(IEEE802.11b/g/n) Data Report Please note that this manual should not be provided to end-users. TAIYO YUDEN Control No. Scope Control name General items APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 This specification (Specification) applies to the hybrid IC WYSAGVDX7 for use Wireless LAN Module (Product) manufactured by TAIYO YUDEN CO.,LTD. (TAIYO YUDEN)
() Wireless LAN IC WYSAGVDX7 () Description Part Number : WYSAGVDX7
: WYSAGVDX7 Function : Radio frequency transceiver Module (IEEE802.11bgn standard conformity)
: IEEE802.11bgn Application : DSLR
Structure : Hybrid IC loaded with silicon and Gallium arsenide monolithic semiconductor
Containment of hazardous substance in this Product
*This product conforms to RoHS Directive (2002/95/EC).
*RoHS (2002/95/EC) Terminal : Data input-output : 15pin FPC Connector 503566-1500 (MOLEX)
: : 15 FPC 503566-1500 (MOLEX) Appearance: Label on the bottom side
Country of origin : China
TAIYO YUDEN CO.,LTD. Control No. Notes :
Control name General items a. Limitation of Warranty APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 i) TAIYO YUDEN provide warranties only if the Product is operated under the condition set forth in this Specification. Please note that TAIYO YUDEN shall not be liable for any defect and/or malfunction arising from use of the Product under the terms and conditions other than the operating conditions hereof. In addition when this Product is used under environmental conditions such as over voltage which are not guaranteed, it may be destroyed in short mode. To ensure the security of customers product, please add an extra fuse or/and a protection circuit for over voltage. ii) This Product is designed for use in products which comply with IEEE802.11bgn Specifications. TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with IEEE802.11bgn Specifications (the non-complying products). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. IEEE802.11bgn,IEEE802.11bgn IEEE802.11bgn b. Instruction for Use (CAUTION) i) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. ii) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with wireless technology. iii) This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 2.4GHz TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 iv) This Product mentioned in this Specification is manufactured for use in DSLR. Before using this product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability suitability, or fitness for particular purpose of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. v) Japan Regulatory Information This product with a specific antenna is a radio system approved for Type Approval. Please follow the instructions below on designing your product. a) This module is certified by Type Approval as the device which has SDIO Interface. Please do not use other purposes except that of certified. Please contact TAIYO YUDEN for more details of purposes of this product. SDIO b) Please notify clearly below sentences, on your product or in the product manual. This product has a radio system which was approved as a radio station in a low power data communication system based on the Radio Law. Name of the radio system: 001-A03958 001-A03958 vi) IC Regulatory Information IC a) This device complies with Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. IC RSS 2
(1)
(2) TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 11 Aug. 2014 b) Please notify certified ID by either one of the following method on your product. Specifiez ID certifie dans votre produit par une de mthode suivante. ID
-Contains Transmitter module IC : 4389B-WYSAGVDX7
-Contains IC : 4389B-WYSAGVDX7 c) Please include following or similar statement into user manual of your host equipment installs this product. The statement in French should be available for the user manual in Canadian area. Incluez suivre ou dclaration semblable dans utilisateur manuel de votre matriel de l'hte installe ce produit, s'il vous plat. La dclaration en franais devrait tre disponible pour l'utilisateur manuel dans rgion canadienne. d)-1.
[Model name of host equipment] is equipped with WLAN device with IC and FCC ID:
-FCC ID: RYYWYSAGVDX7
-IC: 4389B-WYSAGVDX7
[Nom modle du matriel de l'hte] est quip d'un appareil WLAN avec l'identifiant FCC et Canada suivant:
-FCC ID: RYYWYSAGVDX7
-IC:4389B-WYSAGVDX7
[] ID WLAN
-FCC ID: RYYWYSAGVDX7
-IC: 4389B-WYSAGVDX7 d)-2.
(1)This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
(1)
(2) e) Voltage put into this module from host equipment has to be routed thorough power supply regulation on the equipment and stably used in accordance with specification stated in this data report. TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 vii) FCC Regulatory Information FCC a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC 15 2
(1)
(2) b) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment c) Please notify certified ID by either one of the following method on your product. ID
-Contains Transmitter Module FCC ID: RYYWYSAGVDX7
-Contains FCC ID: RYYWYSAGVDX7 d) Please include following or similar statement into user manual of your host equipment installs this product. TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 11 Aug..2014 e)-1.
[Model name of host equipment] is equipped with WLAN device with IC and FCC ID:
-FCC ID: RYYWYSAGVDX7
-IC: 4389B-WYSAGVDX7
[] ID WLAN
-FCC ID: RYYWYSAGVDX7
-IC: 4389B-WYSAGVDX7 e)-2.
(1)This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
(1)
(2) e)-3 CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. FCC RF FCC f) Voltage put into this module from host equipment has to be routed thorough power supply regulation on the equipment and stably used in accordance with specification stated in this data report. TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 10 Jul.2014 c. Term of Support i) You are requested to fully check and confirm by the start of mass production of this Product that (1) no bug, defect or other failure is included in firmware and driver (collectively called Software in this document) used with this Product, (2) no bug, defect or other failure arising from installation of this Product into your product and (3) Software fully meets your intended use. Please note that TAIYO YUDEN shall not be liable for any problem if it is caused by customer's alteration ii) Do not alter Hardware and/or Software (EEPROM Data) of this Product. of Hardware or/and Software without Taiyo Yuden's prior approvals Hardware Software(EEPROM ) iii)Any failure arising out of this Product after mass production will be examined by TAIYO YUDEN. Customer agrees that once such failure is turned out not to be responsible for TAIYO YUDEN after aforesaid examination, some of the technical support shall be conducted by TAIYO YUDEN at customers expense;
provided however, exact cost of this technical support can be agreed through the negotiation by the parties. TAIYO YUDEN CO., LTD. Control No. Control name General items APPROVED CHECKED DRAWN DESIGNED 10 Jul.2014 d. Caution for Export Control This Product may be subject to governmental approvals, consents, licenses, authorizations, declarations, filings, and registrations for export or re-export of the Product, required by Japanese Foreign Exchange and Foreign Trade Law(including related laws and regulations) and/or any other countrys applicable laws or regulations related to export control. In case you will export or re-export this Product, you are strongly recommended to check and confirm, before exporting or re-exporting, necessary procedures for export or re-export of this Product which is required by applicable laws and regulations, and if necessary, you have to obtain necessary and appropriate approvals or licenses from governmental authority. e. Items of the Specification i) Any question arising from the Specification shall be solved in good faith through mutual discussion by the parties hereof. ii) The language of this General items is Japanese and this General items shall be interpreted by Japanese Any copies of translation is a reference purpose only and is not binding on both parties hereto. f. Storage term TAIYO YUDEN guarantees that this product meets this specification for one year after delivery of this product. Any question arising out of this Specification shall be solved in good faith through mutual discussion by the parties hereof. TAIYO YUDEN CO., LTD. Control No. Absolute maximum ratings Item Supply voltage1 Supply voltage2 Supply voltage3 Storage temperature range Operation temperature range Control name Absolute maximum ratings APPROVED CHECKD DRAWN DESIGNED 16 Apr. 2014 Symbol VCC33 VCC18 VIO Tstg Topr Min.
-40 0 Rating Typ. Max. 4.0
1.98 4.0V
Unit V 85 Degrees C 25 70 Degrees C Note1 Remark
*Note1 Recommendation operating range Item Supply voltage1 Supply voltage2 Supply voltage3 Symbol VCC33 VCC18 VIO Min. 3.0 1.71 Rating Typ. 3.3 1.8 Max. 3.6 1.89 1.71/3.0 1.8/3.3 1.89/3.6 Unit V V V Remark Note2 Note2 Note2
*Note2 TAIYO YUDEN CO., LTD. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 Control No. Electrical characteristic DC Specifications Parameter Current / Power consumption The Specification applies for Topr.=25 degrees C, Supply voltage=Typical voltage. No. 1 Peak Current1 2 Peak Current2 3 Peak Current3 4 Power consumption1 Burst Tx (72Mbps) VIO VCC33 VCC18 Ip1 Ip2 Ip2 Condition Symbol
Min. Typ. Pc1 178
5 Power consumption2 Continuous Rx (72Mbps) 6 Power consumption3 Burst Tx (54Mbps) 7 Power consumption4 Continuous Rx (54Mbps) 8 Power consumption5 Burst Tx (11Mbps) 9 Power consumption6 Continuous Rx (11Mbps) 10 Power consumption7 Deep Sleep Pc2 Pc3 Pc4 Pc5 Pc6 Pc7 11 Power consumption8 IEEE Power Save*1
(DTIM=1
=100mS)
/ Beacon Interval Pc8
188 265 181 397 173 2.4 8.6
*1 AP:CG-WLR300GNH(COREGA) Digital Pad Ratings Remark Max. 5 300 150 Unit mA mA mA
mW Duty 2.4%
mW mW Duty 25.4%
mW mW Duty 43.4%
mW mW VIO=3.3V mW VIO=3.3V Parameter No. 1 Input Low Voltage 2 Input High Voltage 3 Input Low Voltage 4 Input High Voltage 5 Output Low Voltage 6 Output High Voltage Condition Symbol SD_D[3:0], SD_CLK, SD_CMD PDn SD_D[3:0],SD_CMD VIL VIH VIL VIH VOL VOH Min.
-0.4 0.7*VIO
-0.4 0.7*VCC3.3
VIO-0.4 Typ.
Max. 0.3*VIO VIO+0.4 0.3*VCC3.3 VCC3.3+0.4 0.4
Unit V V V V V V Remark TAIYO YUDEN CO.,LTD. Control No. AC Specifications Power-on off timing Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 Parameter Condition Symbol Min Typ Max Unit Remark 1 Valid Power to PDn de-asserted 2 PDn asserted before Power ramp down Tpor Tpoff 100 100 mS mS
<Power-on sequence>
PDn should be asserted low (active) during VCC33, VCC18 and VIO ramp-up and must continue to asset low for a minimum of Tpor after VCC33, VCC18 and VIO are stable.
<Power-off sequence>
PDn should be asserted low (active) for a minimum of Tpoff before VCC33, VCC18 and VIO start to ramp down. PDn should be asserted low during VCC33, VCC18 and VIO ramp down. External power down (PDn) Parameter Condition Symbol Min Typ Max Unit Remark 21 1 PDn pulse width Tppw 100 Ms Note 1: PDn is pulled up to VCC33 internally. PDn should be asserted while VCC33, VCC18 and VIO are stable. For lowest current consumption, apply all power rails to the module during the assertion of PDn pin. TAIYO YUDEN CO.,LTD. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 SDIO Interface Specifications Parameter Input SDIO_CLK Frequency Input SDIO_CLK High Time Input SDIO_CLK Low Time Input SDIO_CMD, DATA[3:0] Setup time Input SDIO_CMD, DATA[3:0] Hold time 1 2 3 4 5 Symbol Condition Min Typ Max Unit Remark Tf Tch Tcl Tsu Thd Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed 0 0 10 7 10 7 5 6 5 2
25 50
14
MHz ns ns ns ns ns ns 6 Output SDIO_CMD, DATA[3:0] Delay time Tod
7 Output SDIO_CMD, DATA[3:0] Hold time Toh High Speed 2.5 Normal Mode SD_CLK HOST > WiFi High Speed Mode WiFi > HOST SD_CMD SD_DATA[3:0]
SD_CMD SD_DATA[3:0]
SD_CLK HOST > WiFi SD_CMD SD_DATA[3:0]
WiFi > HOST SD_CMD SD_DATA[3:0]
Tsu Thd Tf Tch Tcl Tod Tf Tch Tcl Tsu Thd Toh Tod TAIYO YUDEN CO.,LTD. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 10 Jul2014 RF Specifications (WLAN 11n/72.2Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. Condition Symbol Min Typ Max Unit Remark 1st Side Lobe 2nd Side Lobe 3rd Side Lobe Rms PER<10%
PER<10%
FREQ 2412 Po M1 M2 M3 Ft Ft EVM SEN MIL 4
-25
-25
-20 6 2472 MHz 8 dBm
-69
-20
-28
-45 25 25
-28
-64
dBc dBc dBc ppm ppm dB dBm dBm No. Parameter 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 7 Rx sensitivity 8 Maximum Input Level TAIYO YUDEN CO., LTD. Control No. Control name Electrical characteristics APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage. No. Parameter 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 7 Rx sensitivity 8 Maximum Input Level Condition Symbol Min Typ Max Unit Remark 1st Side Lobe 2nd Side Lobe 3rd Side Lobe Rms PER<10%
PER<10%
FREQ 2412 Po M1 M2 M3 Ft Ft EVM SEN MIL 4
-25
-25
-20 6
-72 2472 MHz 8 dBm
-20
-28
-40 25 25
-25
-65
dBc dBc dBc ppm ppm dB dBm dBm TAIYO YUDEN CO., LTD. Control No. Control name Electrical characteristics RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage. APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 Condition Symbol Min Typ Max Unit Remark No. Parameter 1 RF frequency range 2 TX Power 3 Spectrum Mask 4 Power up-down rump 5 Frequency tolerance 6 EVM 7 Rx sensitivity 8 Maximum Input Level 1st Side Lobe 2nd Side Lobe Power up Power down Peak PER< 8%
PER< 8%
FREQ 2412 6 2472 MHz 8 dBm
-30
-50 2 2 25 35 dBc dBc us us ppm
-86
-76 dBm 4
-25
-10 dBm Po M1 M2 TU TD Ft EVM SEN MIL TAIYO YUDEN CO., LTD. Control No.
( 1 / 1 ) Control name Outline Appearance APPROVED CHECKED DRAWN DESIGNED 10 Jul. 2014 Unit: mm 0.50.1 PCB 2.15mm TAIYO YUDEN CO.,LTD. Control name Circuit schematic APPROVED CHECKED DRAWN DESIGNED 18 Mar. 2014 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Connector VCC33 VCC33 VCC18 VIO GND PDN TH SD_DATA0 SD_DATA1 SD_DATA2 SD_DATA3 SD_CMD GND SD_CLK GND Control No. 11 Block diagramTerminal layout diagram Thermistor PCB Antenna PA LNA RF Micro controller Baseband RF SW 88W8801 OTP LDO CRYSTAL 38.4MHZ TAIYO YUDEN CO., LTD. Control name Pin layout Control No. 1 / 1 Terminal layout drawing APPROVED CHECKED DRAWN DESIGNED 16 Apr. 2014
(TOP VIEW) C N 1 2 I/O Vol-lvl Description Main Power Supply (3.3V) Main Power Supply (3.3V) 1.8V Power Supply 1.8V/3.3V I/O Power Supply GND Power Down (H:normal operation, L:power down) Pulled up to VCC33 Terminal of thermistor SDIO DATA0 SDIO DATA1 SDIO DATA2 SDIO DATA3 SDIO Command GND SDIO CLOCK GND 15 14 I/O I I I I
I VCC33 VCC33 VCC18 VIO GND VCC33
I/O VIO I/O VIO I/O VIO I/O VIO I/O VIO GND
VIO I GND
Pin Name No. 1 VCC33 2 VCC33 3 VCC18 4 VIO 5 GND 6 PDn 7 TH 8 SD_DATA0 9 SD_DATA1 10 SD_DATA2 11 SD_DATA3 12 SD_CMD 13 GND 14 SD_CLK 15 GND TAIYO YUDEN CO., LTD