FCC ID: XEG-TN180BT ANALOG PLAYER

OPTN1O0TEA14 ini Af

& LL DY ANALOG TURNTABLE OWNERS MANUAL BRA@ Fak Farr nan ArFE Ze NMVUVEV ENFLVI MANUAL DEL USUARIO 1 7"

62 Riniatanth

| TN-100_180BT_OM_EFS_vG_CS6.indb 1 2018/03/26 al IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE DARTC INCIME PEELED CERVICING TOA ONALICIED CERVICE 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. AD) Dentact tha naar card fram hainn walbad an ar ninchsad CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Model for Europe This product complies with the European Directives request, and the other Commission Regulations. For European Customers BU Be et i si PERSONNEL. AN The lightning flash with arrowhead in an equi-

lateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that could be of sufficient magnitude to constitute a risk of electric shock to persons. EME EMA ER REE RMR EEE MSE ED NERAINEEMEE MSE particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tri-

pod, bracket, or table specified by the manufacturer, or sold with the @

apparatus. When a cart is used, use Model for USA Declaration of Conformity Responsible party: TEAC AMERICA, INC. FE Address: 1834 Gage Road, Montebello, California, U.S.A. Telephone number : 1-323-726-0303 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any Disposal of electrical and electronic equipment and batteries and/or accumulators 2

) All electrical/electronic equipment and waste batteries/

accumulators should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities. b) By disposing of electrical/electronic equipment and waste batteries/accumulators correctly, you will help save valuable racniircmoac and nravant any natantial nanativa affarte An caution when moving the cart/appa- W A Dev The exclamation point in an equilateral triangle ratus combination to avoid injury is intended to alert the user to the presence of from tip-over. J\ important operating and maintenance (servicing) 13) Unplug this apparatus during lightning storms or when instructions in the literature accompanying the unused for long periods of time. appliance. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

| WARNING: TO PREVENT FIRE OR SHOCK any way, such as power-supply cord or plug is dama-

MMETTETENCe feCeived, MICIHUQINg MWIMermerence Uldat May Cduse undesired operation. Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses, and can radiate radio i a Sa ce EEN re See NT, BSE Tne ean RT ge Pe AT MENT REE, NRA MDT Re SaReMMAET emer m en sTeneie et human health and the environment.

) Improper disposal of waste electrical/electronic equipment and batteries/accumulators can have serious effects on the environment and human health because of the presence of hazardous substances in the equipment. d) The Waste Electrical and Electronic Equipment

(WEEE) symbols, which show wheeled bins that have been crossed out, indicate that electrical/elec-

_~t~<CS@r'

HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION

@ DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE INSIDE. ea ilf VAI! APE EYDEDIENCING DEOMRIENAC \ArITE TUT ged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

@ The apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position.

@ The mains plug is used as the disconnect device, the ee ee eee eee ee ON DI with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

+Reorient or relocate the equipment and/or the receiving antenna. tronic equipment and batteries/accumulators must be collected and disposed of separately from household waste.

\f a battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) as defined in the Battery Directive (2006/66/EC), then the chemical symbols for those elements will be indicated beneath the WEEE symbol. Ja Pb, Hg, Cd a PN Bae NI Nee I Be IN EEN A Net Bee Bee MN UII IE PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Read these instructions. eo disconnect device shall remain readily operable.

@ Caution should be taken when using earphones or headphones with the product because excessive sound pressure (volume) from earphones or head-

phones can cause hearing loss. IN USA/CANADA, USE ONLY ON 120 V SUPPLY. Increase the separation between the equipment and receiver.

+Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

+ Consult the dealer or an experienced radio/TV technician for help. e) Return and collection systems are available to end users. For more detailed information about the disposal of old electrical/electronic equipment and waste batteries/accu-

mulators, please contact your city office, waste disposal service or the shop where you purchased the equipment. Model for Canada MEeY UIESe HISUUCLIOTIS. r CAUTION Industry Canadas Compliance Statement:

Heed all warnings. This Class B digital apparatus complies with Canadian ICES-003.

@ Do not expose this apparatus to drips or splashes. Follow all instructions. Do not use this apparatus near water. @ Do not place any objects filled with liquids, such as IMPORTANT NOTE : (For Mobile Device Configuration) vases, on the apparatus. Clean only with dry cloth. FCC Radiation Exposure Statement:

Do not block any ventilation openings. Install in accor- Do not install this apparatus in a confined space such This equipment complies with FCC RF radiation exposure as a book case or similar unit. limits set forth for an uncontrolled environment. dance with the manufacturer's instructions. This equipment should be installed and operated with a

@ The apparatus should be located close enough to the

- - - minimum distance of 20 centimeters between the Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

| TN-100_180BT_OM_EFS_vG_CS6.indb 2 cf 2018/03/26 al AC outlet so that you can easily reacn the power cord plug at any time.

| radiator and your body. Wireless equipment precautions (TN-180BT only) | Trademarks and copyrights Compliance of radio transmitter and interference This product has the function of broadband transmitter using 2.4GHz Band. Use frequency range: 2400 MHz 2480 MHz Maximum output power: Bluetooth Class 2 (less than 2.5 mW) Model for EEA (European Economic Area) CE Hereby, TEAC Corporation declares that the radio equipment type is in compli-

ance with Directive 2014/53/EU., and the other Directives, and Commission Regulations. Information for interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fre-

The Bluetooth word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such marks by TEAC CORPORATION is under license. Apple, Mac, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Nt eracnf and \Wiindanvaic ara aithar ranictarad teradamarlbc nr Please use only in the country where you purchased the product. Depending on the country, restrictions on the use of Bluetooth wireless technology might exist. Model for USA Declaration of Conformity me Tull text oF the FU declaration OF conrormity IS avaliable at the following internet address. Please contact us by e-mail. http://www.teac-audio.eu/en/

TEAC Corporation 1-47 Ochiai, Tama-shi, Tokyo, 206-8530, Japan quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to EYEE EOE AI NUE TAN IS ERIS PRE IORI ER RES EEN OST trademarks of Microsoft Corporation in the United States and/

or other countries. Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners. Responsible party: [EAC AMERICA, INC. COMECE UNE HICETIETENCe DY OME OF MOTE OF TIE TONOWIIG Address: 1834 Gage Road, Montebello, Radiation Exposure requirements measures. California, U.S.A. @ Reorient or relocate the equipment and/or the receiving Telephone number : 1-323-726-0303 This equipment meets the regulation, which is recognized antenna. This device complies with Part.15 of FCC Rules. Operation internationally, for the case of human exposure to radio waves

@ Increase the separation between the equipment and is subject to the following two conditions: (1) this device generated by the transmitter. may not cause harmful interference, and (2) this device receiver. must accept any interference received, including interfe- @ Connect the equipment into an outlet on a circuit diffe-

a Statement of compliance rent from that to which the receiver is connected. PSE EE REE EIS Y SEM MEMS EMM RSE | Bn

@ Consult the dealer or an experienced radio/TV technician Model for USA for help This equipment complies with FCC radiation exposure limits :

set forth for an uncontrolled environment and meets the FCC Labeling of authorization FCC ID: XEG-TN180BT radio frequency Exposure Guidelines. Model for Canada Compliance of radio transmitter This device complies with Industry Canada's licence-exempt Model for Canada This equipment complies with IC RSS-102 radiation exposure Tt co ay Ross. UPerallON 15 SUBJECT LO INE TONOWING WO CONGITONS:

1) This device may not cause interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Labeling of authorization IC: 1559C-TN180BT HET RS SEE TMA RET IMT GL AN TEM TET ITEM ET Te Model for EEA (European Economic Area) This equipment complies with EN.62311; Assessment of elec-

tronic and electrical equipment related to human exposure restrictions for electromagnetic fields; the harmonised stan-

dard of DIRECTIVE 2014/53/EU. Compliance of interference This Class B digital apparatus complies with Canadian ICES-003. CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

| TN-100_180BT_OM_EFS_vG_CS6.indb 3 2018/03/26 al ee Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Included items Precautions for use Maintenance Check to be sure the box includes all the supplied accessories @ Place the unit ona flat surface. If the surface of the unit gets dirty, wipe it with a soft cloth or shown below. Please contact the store where you purchased use diluted mild liquid soap. Allow the surface of the unit to IMPORTANT SAFETY INSTRUCTIONS .... 0. cc ccececeececeeceee 2 this unit if any of these accessories are missing or have been dry completely before using.

@ Do not place anything on the dust cover. Objects on the cover might cause noise due to vibrations or fall off, espe-

cially during nlayhack @ Do not use chemical cleaning cloths, thinner or similar damaged during transportation. Wireless equipment precautions (TN-180BT only)............ 3 Trademarks and copyrights......... 0000.0 cece eee cence eee Before USC... 0.0 e etter tenn eee Connections ...... 2... e eee e eee eee eee Namec and fiinctianc of narte Rubber mat x 1 45 RPM record (EP) adapter x 1 Dust cover x 1 e@ Avoid placing the unit in direct sunlight, close to a source Hinges x 2 of heat or in other similar conditions. Do not place the RCA audio cable x 1 unit on top of an amplifier or other equipment that might AC adapter (GPEO53A-V120050) x 1 generate heat that exceeds the operating temperature Owner's manual (this document) x 1 range of this unit. Doing so could cause discoloration,

@ Keep this manual in a safe place for future reference. deformation or malfunction. substances as they could damage the surface of the unit. Z\ CAUTION For safety, disconnect the power cord from the socket before cleaning. Handling records. ..... 00.2.0 ccc cece e cece e eee tees tenes Dust cover Waltanty Caf X | WOF CUSTOMETS IN INE UsA\ dna CdlNdGd only)

@ See the back of this document for information about the warranty in Europe and other countries or areas.

@ The 45 RPM adapter and the box that contains the AC adapter and other included accessories are inside the packing material as shown in the illustration below.

@ As the unit could become warm during operation, always leave sufficient space around it for ventilation. When installing this unit, leave a little space (at least 20 cm (8")) between it and other devices and walls to allow good heat dissipation. When placing it in a rack, for example, leave at least 35 cm (13 3/4") open above it and 10 cm (4) open behind it. Failure to nrovide these aqans cold caiise heat to huyild yn Product registration Customers in the USA, please visit the following TEAC website to register your TEAC product online. http://audio.teac.com/support/registration/

INOLES GUUULTECUIO SUYIUses Recording with a computer (TN-100 only)..............005 Listening with Bluetooth speakers (TN-180BT only)........ Troubleshooting Box with AC adapter and other accessories 45 RPM adapter a , inside and result in fire. DO NOT MOVE THE UNIT DURING PLAYBACK. During playback, the record rotates. Do not lift or move the unit during playback. Doing so may damage the record, the stylus, the cartridge or the unit. Using the TEAC Global Site You can download updates for this unit from the TEAC Global Site:

8 Pads TEMMOVE UIE FECOTU VEIOIE TEIOCGUIIYG OF THOVITIG this unit. Moving the unit with a record on the turntable could damage the record, the stylus and the cartridge or could cause a malfunction. Specifications http://teac-global.com/

1) Open the TEAC Global Site. 2) In the TEAC Downloads section, click the desired lan-

guage to open the Downloads website page for that language.

Packing material

@ The voltage supplied to the unit should match the vol-

tage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. NOTE If the desired language does not appear, click Other Languages. Click the Search by Model Name" section to open the Downloads page for that product. (Users in Europe should click the product name in the Products section instead.) Select and download any updates that are needed.

| TN-100_180BT_OM_EFS_vG_CS6.indb 4 2018/03/26 al

| ee G USB port (USB B type) (TN-100 only) 4 Analog audio from the record is converted to PCM digi-

tal signals (up to 48kHz/16-bit) and output through this. Recording on a computer is possible by connecting this to a USB port on the computer using a USB cable (type

| je A to type B) (page 8). LY fe = i nm! HG BD DC input connector After completing audio cable connections, connect the When PHONO EQ is ON = :

Connect to line input connectors of I included AC adapter here. amplifier, etc. Included AC adapter Contin that the power plug of the AC adapter is plug-

When PHONO EQ is THRU ged into a power outlet. Sk - . dH} . _ eon 4 | aS ie se 8 VO NMNO USE dy Me aQapter OU Wall the One LONMNECE LO PNONO INPUL CONNMECLOLS of amplifier, etc. included. This illustration is of the TN-100. A\ Precautions when making connections A\ Be sure to connect the power cord to an AC outlet that supplies the correct Bi Turntable (platter) voltage. Connection to an outlet that supplies incorrect voltage could cause fire or electric shock.

@ Do not plug the unit in until after making all connections.

@ Carefully read the manuals of the devices that you are Amplifier connecting and follow their instructions when making Place records centered on the turntable (platter). connections. @ Place the included rubber mat on the turntable

(platter) before using it. Thic illustration ic of the TN-100. MK. Unld tho nawar alia whan rnluaning it ne _- Aee= vo eee eee eee into an outlet or unplugging it. Never B Arm lifter pull or yank on the power cord. Use this to raise and lower the tip of the stylus. A Unplug the power cord from the outlet We recommend using the arm lifter to avoid damaging BH Analog audio output connectors (L/R) GB PHONO EQ (audio output setting) switch when you are not planning to use the records and styluses, because it is safer and more cer-

These output analog audio signals. ON unit for an extended period of time. tain than using a finger to do so. The PHONO EQ switch setting changes the type of Audio signals that have been amplified by the built-in output signal. phono equalizer amp are output from the analog audio G Rotation speed setting knob Use the included audio cables (or commercially-availa- output connectors (L/R). Select the rotation speed indicated on the record to ble ones) to connect to analog audio input connectors THRU | E | STANDBY/ON button be played,

(LINE, PHONO, etc.) on other equipment. The signal from the stylus is output directly through the Press the STANDBY/ON button to turn the unit on or RCA audio cable analog audio output connectors (L/R). put it in standby. Ol Tone arm holder Use this when connecting to equipment that has aC) SS L PHONO inputs. R @ oR

@ When shipped new from the factory, this is set to a Tone arm ON. This is a rest for the tone arm.

| Headshell When set to ON, if connected to the PHONO inputs of an amplifier, for example, the output from speakers and ATTENTION headphones will be very loud, which could damage Always remove the protective cover (white) before equipment or harm hearing. use. Keep this protective cover to protect the tip of the stylus during transportation.

| TN-100_180BT_OM_EFS_vG_CS6.indb 5 2018/03/26 al Handling records BD iustcover Holding records Precautions Attaching the dust cover Opening and closing the dust cover When holding a record or removing it from its sleeve, avoid Do not leave records in places that are exposed to direct touching the grooves by holding the record by its label and sunlight or are very hot or very humid. Leaving a record in Dust cover >" X edge with one hand or by holding it by its edge with both such a condition for a long time could result in warping, Open hands. mold growth or other damage. f Label Grooves me amet ctack miltiniae racarde ar nlaca haan, ahiacte an ef outed edge rn a top of them. Do not leave records at an angle for long amounts of time, either. Doing so could result in warping or other damage. Do not allow hard objects to directly touch the audio grooves. Doing so could cause scratches. After you finish playing a record, always put it back into its sleeve for storage. Leaving a record unprotected could 1 | Insert the hinges completely into the hinge holdarc at tha laft and riqht andc Opening Hold the front edge of the dust cover and gently lift it open completely until it stops. PESUITIN WalpING OF SCTALCIIINQ. EE EEE EE Donot use cracked records. of the back of the main unit. The dust cover will stay open in this position. Closing Gently lower the dust cover until it is closed. Cleaning Fl Align the tops of the hinges with the dust cover hinge holders and insert A\ Be careful not to pinch your fingers, for

@ Fingerprints and dust on a record can cause noise and h . them. example, when opening and closing the sound to skip, as well as damage the record itself and the stylus. Use a commercially available record cleaner to me Clnen tha duet cauar durian nlevhkack Paina on the dust cover. NI i eee ERE ETD REST ED clean records. Do not use thinner or anything other than prevents stylus skipping caused by unintended a record cleaner. Such chemicals could harm the surface contact and protects the stylus tip from outside of the record. sound pressure.

@ When using a record cleaner, wipe the surface of the @ Do not open or close it when a record is playing. record in a circular motion, following the grooves. Doing so could, for example, cause the stylus to skip. 2K) @ Keep it closed whenever possible to keep dust out. Removing the dust cover Hold both edges of the dust cover and lift it slowly to remove it along with the hinges from the unit. Then, remove the hin-

ges from the dust cover.

| TN-100_180BT_OM_EFS_vG_CS6.indb 6 2018/03/26 al Playing records 4 | Select the rotation speed indicated on FA Move the tone arm to the track where When playback finishes the record. you want to start playback. When playback finishes, the tone arm automatically returns to The rotation speed can be set to 33 1/3, 45 or 78 RPM. / LL the tone arm holder and the rotation stops. My, To manually interrupt playback, use the arm lifter to raise the Do not vibrate the unit during playback. Doing so could / Ql. phy tone arm and then return the tone arm to its resting position. cause the sound to skip and damage the record and stylus. 3

= rN i) 7 kf NS 5 | Slide the tone arm clasp to the right to @ Always remove the protective cover (white) before ON remove it use. Keep this protective cover to protect the tip of 1 STANDBY the stylus during transportation. 1 | Press the STANDBY/ON button on the back of the unit to turn it on. Arm lifter Tone arm e The first song starts at the outer edge of the record.

rs Lower the stylus to the outer edge of the record if /

A Open the dust cover slowly. you want to listen to the first song. Fl Use the arm lifter to lower the tone

+ Headshell arm. /

The tone arm lowers slowly until the stylus touches the oe ye Je bee Ke te 1) Ua PF poy PERMIT GEIS PIG YNGLIN Met to:

Close the dust cover during playback. Since doing @ The tone arm may not return to the tone arm holder automatically depending on the record. In that case, move the tone arm back to the tone arm holder manually. this prevents skipping caused by unintended con-

tact and blocks external sound pressure, it makes 6 | Use the arm lifter to raise the tone arm. |

noise less likely to occur. A\ Do not place anything on the dust

(AD cover. A. Raecareful not ta ninch vour fingers. for BS a example, when opening and closing the dust cover.

@ During playback, do not touch the tone arm or the rota-

ting record. Doing so could damage the stylus tip and cause scratches on the record. Arm lifter Ei Place a record on the turntable (platter). Tone arm When playing a 45 RPM large-hole single record, use @ Do not forcibly stop turntable rotation during playback. the included adapter. Since this product is not a turntable designed for DJs er @ You can also move the tone arm above the record (direct drive), doing something like this could cause with the arm lifter lever forward and then slowly malrunction. lower the tone arm to start playback. : :

If the volume is too loud during record playback, vibration from speakers could be transmitted to the stylus, causing loud feedback. If this happens, lower the volume of the amplifier.

| TN-100_180BT_OM_EFS_vG_CS6.indb 7 2018/03/26 al Notes about record styluses | Recording with a computer (TN-100 only)

@ Record styluses are precision parts, so handle them care- When detaching a record stylus (the orange part), hold the The sound of a record can be digitally recorded on a compu-

fully to avoid bending or damaging their tips. If a stylus cartridge and pull the record stylus in the A direction to ter by using a commercially-available USB cable to connect Connecting witha computer becomes bent or damaged, it might not be able to follow remove it. this unit to a USB port on the computer. the audio groove precisely and could damage records or |

" fl Turn the computer on. cause other malfunction. Q TT .

@ If a stylus becomes dirty, use a commercially available ~ A Supported operating systems Confirm that the operating system is working correctly. stylus cleaner or similar product to clean it. y oo OC ; - Sl. LOMPUlels FUNNMING MME TONOWING OPelallNg systems CaN DE | fe | use tne Usb Cabie to connect the com-

connected by USB to this unit (as of April 2018). puter and this unit. When installing a new stylus, insert it in the B direction, pus- Windows hing it in so that its clasp is aligned with the cartridge. Windows 7 (32-bit, 64-bit) Replacing the stylus Windows 8 (32-bit, 64-bit) Q nh Windows 8.1 (32-bit, 64-bit) iS A record stylus will become worn down after it has been used a =~ Windows 10 (32-bit, 64-bit) coon for about 500 hours. This will worsen the sound quality and Mac a _____, could damage records. Keplace the stylus with one that we OS X Lion (10.7) recommend before this occurs, Replacement stylus (sold separately):

STL-122 diamond stylus (includes 2) OS X Mountain Lion (10.8) OS X Mavericks (10.9) For stylus replacements, contact your dealer or TEAC listed OS X Yosemite (10.10) CAUTION on the back of this Owner's manual. OS X El Capitan (10.11) (___1_ WL Before replacing the stylus, turn this unit and the amplifier macOs Sierra (10.12) @ Use a commercially-available USB cable with a fer-

off. Failure to do so could cause sudden loud noises that macOs High Sierra (10.13) . rite core when connecting the unit to a computer. might damage speakers. Use with operating systems other than these is not guaranteed. Be careful not to hurt your hand or the equipment. @ This unit will run with the standard OS driver, so there is Ei Press this units STANDBY/ON button Be careful not to allow small children to accidentally swal- no need to install a special driver. to turn it on

. low styluses. When they are connected, the computer will automati-

cally detect this unit's USB port and identify it as "USB Audio CODEC".

@ Be aware that bent styluses, for example, that result from insufficient customer caution or an outside cause are not covered by the warranty.

@ To record audio from this record player using a compu-

ter. you must first install software that can be used for audio recording on the computer. You may purchase the audio recording software that you prefer separately or download free software, such as Audacity (http://www. audacityteam.org/), from the Internet. As free software, Audacity is not supported by TEAC.

@ When connected to a computer by USB and recording audio, do not do any of the following. Doing so could cause the computer to malfunction. Always quit the computer recording software before doing the following.

+ Disconnect the USB cable

+ Put the unit into standby

| TN-100_180BT_OM_EFS_vG_CS6.indb 8 2018/03/26 al fo | Listening with Bluetooth speakers (TN-180BT only) This unit has a Bluetooth transmitter that can send sound to Pairing Bluetooth speakers El Play a record Computer settings Bluetooth speakers wirelessly. Pairing this unit with another Bluetooth spea-

The following example explains the settings to make using ker is necessary the first time you connect with that @ Bluetooth connection is also possible while a record Windows 7. ii Press the STANDBY/ON button on the Bluetooth speaker. is playing. back of the unit to turn it on. Press the PAIRING button on this unit to start @ Adjust the Bluetooth speaker volume if necessary. connection mode. @ This unit cannot be used to adjust the volume. i From the Start menu, select Control Panal_ thn DAIDINIG hWiittan The pairing lamp will blink slowly. 7 Fl ClickSound. Ei Click the Recording tab, and confirm that USB Audio CODEC is set as the Default Device. boom * tL

=. ON I STANDBY

[ daw

@ This unit will enter paring mode if a connected Bluetooth speaker is not found for nine seconds. The pairing lamp will blink rapidly. When this unit and the Bluetooth speaker are connec-

ted, the pairing lamp will stay lit without blinking.

@ Refer to the operation manual of the Bluetooth spe-

aker for information about how to use it. POSE MEETS IMT ES PO REI EEN MMe on this unit for at least three seconds to enter Bluetooth standby mode or turn this unit off. ep, @ Pairing might take some time depending on the

. connected Bluetooth speaker. Qi Select Microphone USB Audio CODEC,

@ This unit will connect to the closest Bluetooth spea-

and click the Properties button. A Pair and connect the Bluetooth ker. If no Bluetooth speaker is found for about three speakers. minutes, Bluetooth standby mode will begin and A Click the Advanced tab. the pairing lamp will become unlit.

@ When connecting to a Bluetooth speaker, move other Bluetooth speakers and receiving devices at From the Default Format pull-down menu, select the audio quality (format) that you want to use for recording.

"2 channel, 16 bit, 48000 Hz (DVD quality) provides Bey ee es Cl. one least 10 meters (33 ft.) away from this unit or turn them off. Connecting already paired Bluetooth speakers

@ Since this unit switches from connection mode to pairing mode quickly, we recommend putting the Bluetooth speaker into pairing mode before doing the following. Press the PAIRING button on this unit to start ae SNR iia cca PEM TT CAIN NMGTILY MM Glo POEM TE Te oO. ws O Recording with a lower sampling frequency reduces QQ Cr The pairing lamp will blink slowly. the audio quality but also uses less file space. oo When this unit and the Bluetooth speaker are connec-

ted, the pairing lamp will stay lit without blinking. PAIRING button/

HA Click OK. Pairing lamp

| TN-100_180BT_OM_EFS_vG_CS6.indb 9 2018/03/26 al Troubleshooting If you experience a problem with this unit, please check the following items before requesting service. Something other than this unit could also be the cause of the problem. Please also check that the connected devices are also being used properly. If it still does not operate correctly, contact the retailer where you purchased the unit. The pitch is wrong. Select the rotation speed indicated on the record

(page 7). The sound is skipping. TN-180BT only Connection is not possible with the Bluetooth speaker |

want to connect.

= Turn both this unit and the Bluetooth device off once. Turn them both on and try pairing again.

=> Vibrations will cause skipping. Place this unit in a stable > Turn off the power of other Bluetooth speakers within location. i TN-100/TN-180BT 10 meters (33 ft). The closest Bluetooth speaker will be paired. Ifthe record is dirty, wipe it clean. No power.

=> Do not use scratched records. Connection with the Bluetooth speaker succeeded, but

=> Confirm that the AC adapter is plugged into an outlet. I cannot hear any playback sound. Then, press the STANDBY/ON button to turn the unit on (page 5).

=> Check the volume of the Bluetooth speaker.

> Press the PAIRING button on this unit for at least three seconds to disconnect the Bluetooth speaker once. There is no sound.

= When connecting this unit's analog audio output Then, try pairing again. connectors to the audio input connectors of an ampli-

fier or other equipment, set the PHONO EQ (audio ALITA It cattinga) caitch ta ON (rage &\

= Turn this unit off and then on again. Then, press the PAIRING button to try pairing again. DE IEEE EN ANIM I Playback is not possible; there is noise. Connection with the smartphone is not possible. => This unit functi | i i

> Confirm that the stylus cover (made of white plastic) his unit functions as a Bluetooth transmitter, and it can send sound to Bluetooth speakers. has been removed. Since it does not function as a Bluetooth receiver, it

. cannot be connected to a smartphone.

= Fingerprints and dust on a record can cause noise and Pp the sound to skip. Use a commercially-available record cleaner to clean records (page 8).

> Clean the stylus (page 8).

> lf the stylus is worn-out, replace it (page 8).

= Place the unit as far away as possible from TVs, microwave ovens and other devices that emit electro-

magnetic waves. 10

| TN-100_180BT_OM_EFS_vG_CS6.indb 10 2018/03/26 al Turntable (platter) Drive syStOM 02... cece cece e cece eee e eee e ene ees Belt drive MOtOr. ieee eee r cette etter renee ee DC motor Rotation speed.................... 33 1/3 rpm, 45 rpm, 78 rem Rotation speed variation ....... 0... cece cece eee e eee +2%

USB port (TN-100 only) USB port that can receive power from computer USB buses

(Full Speed) ..... cece eee eee eee USB connector type B USB bus power Support...............c cece eee 5V, 500 mA

@ Use a commercially-available USB cable to connect the unit to a computer to receive power from it. General AC adapter power INDUL eee AC 100 V AC 240 V, 50-60 Hz OUtpUtL 0 cece eee eens 12V,500 mA Power consumption Included accessories Rubber mat x 1 45 RPM record (EP) adapter x 1 Dust cover x 1 Hinges x 2 RCA Audio cable x 1 AC adapter (GPE053A-V120050) x 1 WWOW ANG TUE. 6 eee eee eee ee eee eee eee V.LI70 SNratio............. 64 dB or higher (A-weighted, 20 kHz LPF) Turntable (platter)... 00... e eee eens Plastic 29cm (11 1/2) diameter Sampling frequency 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz Quantization bit depth stanaby ON 0) 0 0.2 W or less TN-180BT oo... cece eee eee cece e eee 0.3 W or less On TN-100.. 0.00 c cece cece eee eee cence es 1.5 Wor less TN-180BT ... 2. eee eee eee 2W or less Weight...... 00... cece cece cece eee ee eee e eee 3.5 kg (7 3/4 Ib) Owner's manual (this document) x 1 Warranty card x 1 (for customers in the USA and Canada only)

@ Specifications and appearance are subject to change without notice.

@ Weight and dimensions are approximate. fone arm Arm typ@.........05 Effective arm length Cartridae Bluetooth function (TN-180BT only) Bluetooth Version ...... 2... c cece cece ee 4.0 (DUAL MODE) Output Class oo. eee eee e cette eee teen ee ned Class 2 Supported profile ........ 0.06. c cece eee e cece eee ees A2DP

[lca SBC Operating temperature range ........... eee 5C to 35C Dimensions (W x H x D) (including protrusions) When the dust cover is closed 420 x 105 x 356 mm (16 5/8 x 4 1/4 x 14 1/8) When the dust cover is open 420 x 356 x 386 mm (16 5/8" 14 1/8 15 1/4")

@ Illustrations in this owners manual might differ slightly from production models. Output voltage... cece cece eee eee 24 mV +3 dB

(10 kHz, 3.54 cm/s) Replacement stylus (sold separately):

STL-122 diamond stylus (includes 2) When the aust cover Is removed 420 x 92 x 356 mm (16 5/8 x 3 5/8"x 14 1/8")

@ Performance data is specified at 20C. For stylus replacements, contact your dealer or TEAC listed on the back of this Owner's manual. Output voltage PHONO EQTHRU. PHONO EQ ON.... Output connectors

| TN-100_180BT_OM_EFS_vG_CS6.indb 11 11 2018/03/26 al