Z CR-H101 CD Receiver ENGLISH FRANAIS ESPAOL OWNERS MANUAL MODE DEMPLOI MANUAL DEL USUARIO IMPORTANT SAFETY INSTRUCTIONS CAUTION o DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE INSIDE. o IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. o USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. IN USA/CANADA, USE ONLY ON 120 V SUPPLY. The nameplate is located on the bottom of the unit as shown below. Front side CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
< The lightning flash with arrowhead symbol, within an equilateral trian-
gle, is intended to alert the user to the presence of uninsulated dan-
gerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of elec-
tric shock to persons. B The exclamation point within an equi-
lateral triangle is intended to alert the user to the presence of import-
ant operating and maintenance
(servicing) instructions in the litera-
ture accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CLASS " apparatus with double insulation, and no protective earth provided. Nameplate 2 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o The apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position. o The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. o Caution should be taken when using earphones or headphones with the product because exces-
sive sound pressure (volume) from earphones or headphones can cause hearing loss. CAUTION o Do not expose this apparatus to drips or splashes. o Do not place any objects filled with liquids, such as vases, on the apparatus. o Do not install this apparatus in a confined space such as a book case or similar unit. o The apparatus should be located close enough to the AC outlet so that you can easily reach the power cord plug at any time. o If the product uses batteries (including a bat-
tery pack or installed batteries), they should not be exposed to sunshine, fire or excessive heat. o CAUTION for products that use replaceable lithium batteries: there is danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type. V Precautions concerning batteries Misuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of nearby things. Please read and observe the following pre-
cautions carefully. o Be sure to insert the batteries with correct posi-
tive () and negative (^) orientations. o Use batteries of the same type. Never use differ-
ent types of batteries together. o If the remote control is not used for a long time
(more than a month), remove the batteries to prevent them from leaking. o If the batteries leak, wipe away the leakage inside the battery compartment and replace the batter-
ies with new ones. o Do not use batteries of types other than those specified. Do not mix new batteries with old ones or use different types of batteries together. o Do not heat or disassemble batteries. Never throw batteries into fire or water. o Do not carry or store batteries with other metallic objects. The batteries could short circuit, leak or explode. o Never recharge a battery unless it is confirmed to be a rechargeable type. 3 Wireless equipment precautions Radiation Exposure requirements This equipment meets the regulation, which is recog-
nized internationally, for the case of human exposure to radio waves generated by the transmitter. Statement of compliance Model for USA This equipment complies with FCC radiation expo-
sure limits set forth for an uncontrolled environment and meets the FCC radio frequency Exposure Guidelines. Model for Canada This equipment complies with IC RSS-102 radia-
tion exposure limits set forth for an uncontrolled environment. CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Compliance of radio transmitter and interference Model for USA Declaration of Conformity Responsible party:
TEAC AMERICA, INC. Address: 1834 Gage Road, Montebello, California, U.S.A. Telephone number : 1-323-726-0303 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Labeling of authorization FCC ID: XEGCR-H101 Model for Canada Compliance of radio transmitter This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:
1) This device may not cause interference; and 2) This device must accept any interference, includ-
ing interference that may cause undesired operation of the device. Labeling of authorization IC: 1559C-CRH101 Compliance of interference This Class B digital apparatus complies with Canadian ICES-003. CAUTION Authorization of wireless devices are different in countries or regions. Please use only in the country where you purchased the product. o Depending on the country, restrictions on the use of Bluetooth wireless technology might exist. 4 Information for interference
(FCC requirements) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. o Reorient or relocate the equipment and/or the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Laser information This product contains a semiconductor laser system inside the cabinet and is classified as a CLASS 1 LASER PRODUCT. To prevent being exposed to the laser beam, do not try to open the enclosure. Laser:
Type: EP-HD870PB Manufacturer: GUANGDONG EVER BRIGHT GROUP CO.,LTD Laser output: Less than 1 mW on the objective lens Wavelength: 79225 nm Model for USA This product has been designed and manufactured according to FDA regulations title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968, and is classified as class
! laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings. The label required in this regulation is as follows:
Front side Bottom 5 Z TEAC CORPORATION 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan Phone: +81-42-356-9156 TEAC AMERICA, INC. 1834 Gage Road, Montebello, California 90640 U.S.A. Phone: +1-323-726-0303 TEAC AUDIO EUROPE Liegnitzer Strae 6, 82194 Grbenzell, Germany Phone: +49-8142-4208-141 This device has a serial number located on its back panel. Please record the serial number and retain it for your records. Model name: CR-H101 Serial number 1115 MA-2225A