FCC ID: 2ALU5E100CTX Wireless HDMI Extender

ClearClick Present+Share (USB-C Edition) Wireless Presentation & Video Broadcasting System Users Manual & Quick Start Guide 2-Year Warranty & USA-Based Tech Support For tech support, email us at: support@clearclick.com Extend your warranty to 3 years for free by registering at:

www.ClearClick.com/Register/

www.ClearClick.com FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

(2) Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

This device complies with FCC SAR requirements. The highest reported 1g-SAR for body is 0.287 W / Kg Limb Worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm is used between the users body , including the antenna. Third-party belt-

clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 2 Additional Transmitters Available This system supports up to 8 transmitters. To purchase additional transmitters, please visit:

www.ClearClick.com Extend Your Warranty for FREE!

Extend your warranty by one year for free simply by registering your product at:

www.ClearClick.com Safety Precautions Important, Please Read:

1. Do not disassemble the units. 2. Do not permit children to use or play with this device. 3. Please note that the devices may become very warm during use. 4. Do not operate the unit around water or rain. Do not operate the unit around any unnecessary machines or appliances. 5. Unplug the units when not in use. 6. Use only the included accessories with the device. 2-Year Warranty Your purchase comes with a 2-year warranty. This means that if anything goes wrong with the unit (other than accidental damage) within the first 2 years of ownership, we will replace the unit for free, 100% at our cost. Contact us at support@clearclick.com with any issues. 3 Whats In The Box?

Recommended System Requirements

PC/Mac/Phone/Netbook/Tablet with USB-C port that supports USB-C video output

(DisplayPort Alt Mode).

Recommended minimum 2018 model year.

Phones/Tablets must have USB-C port.

(Lightning port & micro USB not supported.) 4 Quick Start Guide 1. Plug in the receiver (RX) to your TV, monitor, or projector via HDMI. 2. Connect the USB-C port of the receiver (RX) to a USB port or power supply for power (required). 3. Connect a transmitter (TX) to your PC/Mac/Netbook/Phone/Tablets USB-C port.

(See System Requirements on previous page.) 4. Press the button on the transmitter (TX) to start transmitting to the receiver (RX) attached to your TV, monitor, or projector. 5. Within a few seconds, your TV/monitor/projector will show the video signal that it is receiving from your device. 6. IMPORTANT NOTE - HOW TO USE THE SECOND TRANSMITTER (TX):

If the first transmitter (TX) is transmitting/in use, you must first unlink it by pressing the button on 5 the first transmitter (TX) again (or unplugging it entirely). This will unlink the first transmitter and allow you to transmit from the second transmitter

(TX). 6 Technical Specifications Transmitter (TX) Interface: USB-C Receiver (RX) Interface: HDMI Network: Wi-Fi Max Resolution: 1920x1080/60 FPS Latency: 90~120ms Range: Up to 49 feet 7 For product support or to purchase additional transmitters (TX), please visit:

www.ClearClick.com support@clearclick.com 2023 ClearClick Software LLC. All rights reserved. 8

TEVII TECHNOLOGY CO., LTD. Agent Authorization Company: TEVII TECHNOLOGY CO., LTD. Address: 10F, No. 125, Sec. 2, Datong Rd. 22183 Xizhi District, New Taipei City, Taiwan Product Name: Wireless HDMI Extender Model Number(s): E100C TX, Present + Share USB-C Edition Product Description: Wireless HDMI Extender We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Shelly Liu Title:

MANAGER Company:

TEVII TECHNOLOGY CO., LTD. Date: Jul. 18, 2023

TEVII TECHNOLOGY CO., LTD. Section 2.911(d)(5)(i) Certification Equipment Type Company name: TEVII TECHNOLOGY CO., LTD. Address: 10F, No. 125, Sec. 2, Datong Rd. 22183 Xizhi District, New Taipei City, Taiwan Product Name: Wireless HDMI Extender FCC ID: 2ALU5E100CTX Model(s): E100C TX, Present + Share USB-C Edition 2.911(d)(5)(i) Equipment Type We, [TEVII TECHNOLOGY CO., LTD.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered ListNOTE 1 Yours sincerely, Name:Shelly Liu Title: MANAGER Company name: TEVII TECHNOLOGY CO., LTD. Date: Jul. 18, 2023 Signature:

NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(i)EquipmentTypeAttestationv1.2

TEVII TECHNOLOGY CO., LTD. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: TEVII TECHNOLOGY CO., LTD. Address: 10F, No. 125, Sec. 2, Datong Rd. 22183 Xizhi District, New Taipei City, Taiwan Product Name: Wireless HDMI Extender FCC ID: 2ALU5E100CTX Model(s): E100C TX, Present + Share USB-C Edition 2.911(d)(5)(ii) Applicant filing We, [TEVII TECHNOLOGY CO., LTD.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identifiedNOTE 1on the Covered ListNOTE 2,established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Date: Jul. 18, 2023 Yours sincerely, Name: Shelly Liu Title: MANAGER Company name: TEVII TECHNOLOGY CO., LTD. Signature:

NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(ii)ApplicantAttestationv1.3

TEVII TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ALU5E100CTX Date: Jul. 18, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description SOFTWARE SECURITY DESCRIPTION In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Shelly Liu Title: MANAGER

TEVII TECHNOLOGY CO., LTD. FCC Software Configuration Control Declaration Date: Jul. 18, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product:Wireless HDMI Extender Model No.: E100C TX, Present + Share USB-C Edition Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Date: Jul. 18, 2023 Name:Shelly Liu Title: MANAGER Signature of applicant FCC Software Configuration Control Declaration Rev1.0.docx

TEVII TECHNOLOGY CO., LTD. Model Difference Declaration To Whom It May Concern, We, TEVII TECHNOLOGY CO., LTD. (Wireless HDMI Extender) ; Model Number: E100C TX, Present

+ Share USB-C Edition; All models the function, software and electric circuit are the same, only with a product color, model named and trade mark different. Test sample model: E100C TX. Please contact me if you have any question. Signature:

Name:

Shelly Liu Title:

MANAGER Date: Jul. 18, 2023

TEVIITECHNOLOGYCO.,LTD. Section 2.911(d)(7) USA Agent for Service of Process Company name: TEVII TECHNOLOGY CO., LTD. Address: 10F, No. 125, Sec. 2, Datong Rd. 22183 Xizhi District, New Taipei City, Taiwan Product Name: Wireless HDMI Extender FCC ID: 2ALU5E100CTX Model(s): E100C TX, Present + Share USB-C Edition 2.911(d)(7) USA Designated Agent for Service of Process We, [TEVII TECHNOLOGY CO., LTD.] (the applicant) designate [ClearClick Software LLC]NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: ClearClick Software LLC Applicant Company name: TEVII TECHNOLOGY CO., LTD. Address:3006 Teak Place Fullerton, CA 92835 United States Address:10F, No. 125, Sec. 2, Datong Rd. 22183 Xizhi District, New Taipei City, Taiwan 2.911(d)(7)USAAgentv1.3 TEVIITECHNOLOGYCO.,LTD. FCC Registration Number

(FRN):0028131795 Contact Name: Keith Gilbert Telephone No:(714) 215-8016 Email: keith@clearclicksoftware.com FCC Grantee Code: 2ALU5 Contact Name: Shelly Liu Telephone No: +886-2-86927888 Email:shelly_liu@tevii.com Signature:

Title: Owner Date:Jul. 03, 2023 Signature:

Title: MANAGER Date: Jul. 03, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference;Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911(d)(7)USAAgentv1.3