User'sManual PortableBluetoothSpeaker Model No.:
FCC I D:
Trade Name:
SP001 2ADANSP001 Topneer Operating Instructions iGrenade Portable Bluetooth Speaker Model: SP001
: SP001 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Key reference Power Play/Pause & Answer calls
/
Volume up/move next
/
Volume down/move previous
/
Microphone Indicator light USB charging port USB 3.5mm AUX audio input jack 3.5 AUX Features and Specifications Hands free functionality for calls Built-in rechargeable polymer battery Continuous playtime: 6 hours 6 Charging time: 3 hours 3 Passive radiator bass effect Ultra clear microphone USB charging interface USB External AUX input port AUX Water resistance: IPX4 IPX4 Voice guidance Key guide Material: silicone/ABS
/ ABS Transmission distance:10m 10 Bluetooth version: V3.0 V3.0 Frequency response: 100Hz-20KHz 100Hz-20KHz Power output: 3W1 3W1 Signal to noise ratio:75dB 75dB Standard distortion:0.5%
0.5 Loudspeaker: 4 3W1 4 3W1 Battery: 800mAh 3.7V 800mAh 3.7V Page 1 Power: Press and hold for 3 seconds to start the device. Press and hold for 3 seconds to switch it off. The Bluetooth mode sets automatically when device starts. The indicator light will flash blue/red during device discovery and will show a solid blue light to indicate a successful connection to your phone (with a voice prompt that Topneer has been connected). Bluetooth device discovery time is 10 minutes, if no available device is found within this time the speaker unit will be set to ready mode. 3
:Topneer has Been connected. 10 10 Play/pause: press once to pause or resume play. Calls: Press once to answer or end an incoming call. Press and hold for 3 seconds to refuse a call. Play will automatically be paused when a call is in progress. When playing the music, press and hold for three seconds to switch into bluetooth device discovery mode. press once to pause, and you can also use line in at this time.
/
3 3 LINE IN Volume up/move next: Press once to move the play list forward. Press and hold to increase the volume.
/
Volume down/move previous: Press once to move the play list backward. Press and hold to decrease the volume. /
Indicator lights: During Bluetooth device discovery the indicator light will flash red/blue alternatively. If a Bluetooth connection is established the indicator light show blue and will remain on, otherwise the blue indicator light will flash slowly when no connection is established after 10 minutes. If the battery is running low the indicator light will flash red to indicate that the device should be charged. While charging, the indicator light will show red and will be turned off once the device has been fully charged. 10 Page 2 Page 3 Operating Instructions Operating Instructions 1. Press and hold the power button for 3 seconds to start the device, a voice prompt will indicate the device is on and is ready to connect. 3
"Topneer has been powered on, searching for the devices(Topneer )"
2. Place your phone/laptop within range of the speaker unit to allow the connection to be established and ensure that your phone/laptop has Bluetooth enabled to receive connections. Use the Bluetooth search option on your phone/laptop to find Bluetooth devices to connect to. The Topneer unit will appear on your phone/laptop as SP001.
//
SP001 2a. Once paired for the first time your phone/laptop will keep the device pairing recognition for future connections, in which case you need only ensure that Blueto-
oth is enabled on your phone/laptop and that the Topneer unit is powered on in order to establish the connection. However, if the SP001 device is not listed on your phone/laptop then please repeat the steps above.
/
3. When a connection is established with your phone the Topneer unit will give another voice Topneer unit has been connected.
"Topneer has been connected (Topneer )"
4. When a connection is lost, or disconnected, the Topneer unit will send out a beep-
beep response and a voice prompt to indicate that the device is waiting for connections. You can also switch the Topneer unit off to disconnect it from your phone/laptop.
"waiting for connections()"
5. The Topneer unit will ring for incoming calls while connected to a Bluetooth mobile device: press the Play/Pause/ Calls button once to answer and once again to hang up; or press and hold for 3 seconds to refuse the call. The Topneer unit will give a beep response for each successful action. 3 6. The Topneer unit will send out a low power beep hint and the red indicator light will flash to indicate low power. Please connect to a USB device to charge the unit (such as a notebook or other USB charging device).
"No power"
7. The Topneer unit can only be connected to one device at a given time. For Apple devices: please disable the sound output on the first device before pairing with another
(otherwise there will be no sound output from the second device). For other devices:
disconnect the Bluetooth connection to allow pairing with a different device. 8. Please keep devices within range of each other, to a maximum of 10m, otherwise the Bluetooth connection will be lost. 10m Attention 1. Store in a cool dry place. 2. Please do not throw or drop this item as this may lead to internal and external damage. 3. Please do not disassemble, repair and modify this item. Opening the unit casing will void warranty. 4. Please charge with the stereo rated voltage of the power charger. This item should only be charged by connection to a USB enabled charging unit (eg: laptop or tablet). USB 5. Hearing loss can occur while listening to media with excessive volume over a long period. 6. Please turn off speaker to extend life span of the lithium battery when not in use. Page 4 Page 5 Warranty Card Thank you for purchasing this product.Please keep this manual for future reference. Model User Name Tel Purchase Date Users Address Zip Code According to the prescription, the period for protecting to fix our companys Cash Counting Machine is one year. (From the day when you have the invoice) During this period, any belongs to under normal usage circumstance cause because of the product quality's problem of breakdown, our company will be responsible for giving free maintain. 12 FAQ Solutions Disconnect the Bluetooth pairing and then restart the Topneer speaker Topneer Chect if connected devices are beyond effective connection distance (10m) 10 Check if there are obstacles between connected devices Check whether volume is adjusted or not Check whether the speaker unit has been paused Laptop: open sound devices to switch to / allow the bluetooth device for playback /
Check whether the audio cables has been connected correctly Problems Multiple connections failures Staccato appears when playing media No sound while playing media No sound when AUX connected AUX More Information Exporter: Guantai Rubber products Co., Limited Address: Flat/RM 01, 21F Prosper commercial building 9 yin chong street KL 9 21F,01/
Customer service hotline: +86-400-840-2828 400-840-2828 www.topneer.com Website: www.topneer.com
* Packing accessories speaker 1, charging line 1, audio line 1, instruction manual 1, warranty card 1, certificate 1. 1 1 1 1 1 1 Page 6 Page 7 FCC Warnings Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC R ules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a C lass B digital device, pursuant to Part 15 o f the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause h armful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and o n, the user is enc ouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance; such change or modification could void the uses authority to operate the equipment.