FCC ID: 2AXJ4XE75V3 AXE5400 Whole Home Mesh Wi-Fi 6E AP

User Guide AXE5400 Tri-Band Mesh Wi-Fi 6E AP HX716 Pro 1910013319 REV1.0.0 2023 TP-Link Contents About This Guide 1 Appearance 2 Set Up Your Device 3 Troubleshooting 7 Authentication 8 About This Guide This guide provides a brief introduction to AXE5400 Whole Home Mesh Wi-Fi 6E System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience. Conventions In this guide, the following conventions are used:

Convention Description Deco Stands for Deco Whole Home Mesh Wi-Fi System/

Unit. Underline Hyperlinks are in teal and underlined. You can click to redirect to a website or a specific section. Key information appears in teal, including management page text such as menus, items, buttons and so on. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. Teal Note:

Tips:

More Info Specific product information can be found on the product page at https://www.tp-link.com. A Technical Community is provided for you to discuss our products at https://community.tp-link.com. Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support. Speed/Coverage/Device Quantity Disclaimer Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. MU-MIMO Disclaimer Use of MU-MIMO requires clients to also support MU-MIMO. IoT Compatibility Disclaimer IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use. Seamless Roaming Disclaimer Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device. HomeShield Disclaimer HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information. 1 Appearance Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation below:

Tip: The product label can be found at the bottom of the product. Pulse Yellow:

Deco is resetting. Solid Yellow:

Deco is starting up. Pulse Blue:

Deco is ready for setup. Solid Blue:

Deco is setting up. Pulse Green:

Deco is upgrading firmware. Solid Green:

Deco is all set up and connected. Pulse Red:

The satellite Deco is disconnected from the main Deco. Solid Red:

Deco has an issue. 1 Gigabit & 2.5 Gigabit Ethernet Port:

For connecting Deco to your modem, the Ethernet outlet, or for other internet services. Power Slot:

For connecting Deco to the power socket via the provided power adapter. Reset Button:

Press for 1 second and release to reset Deco to factory default settings. The light changing from pulsing yellow to solid yellow indicates a successful reset. 2 Set Up Your Device First let's start by setting up the network. Get the TP-Link app for iOS or Android, then follow the app to walk through the setup. 1. Get the Deco app 2. Log in or sign up with TP-Link ID 3. Select your Deco model Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet. Open the app and log in with your TP-Link ID. If you dont have a TP-Link ID, create one first. Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password. Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network. or 3 4. Plug in your Deco 5. Wait until Deco's LED pulses blue 6. Specify your Deco's location Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect your Deco directly to the Ethernet outlet. Wait until your Deco's LED pulses blue, then your phone/tablet will connect to the Deco's default Wi-Fi automatically. Select or custom a location for your Deco. The location will be used as the name of your Deco. 4 7. Connect your Deco to the internet 8. Create your Wi-Fi network 9. Create your 6GHz Wi-Fi network Select the internet connection type and enter the information. If you are not sure, contact your internet service provider. Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi. Set a network name and a password. These will be the name and password you use to connect your devices to the 6GHz Wi-Fi. 5 10. Connect to your Wi-Fi network 11. Setup complete Connect your phone/tablet to the Deco's Wi-Fi. Your Deco network is now up. You can connect your devices to the Deco network. Plug in the other included Decos, and they will automatically join the network within 2 minutes. 6 Troubleshooting Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support Q1. What should I do if I fail to configure the main Deco and get stuck on We couldn't find Deco?

Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM Q2. What should I do if I fail to configure the satellite Deco and get stuck on We couldn't find another Deco?

Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4 Q3. What should I do if I fail to configure the main Deco and get stuck on Testing Internet Connection?

Refer to the guide https://www.tp-link.com/support/faq/2239/

Refer to the video https://youtu.be/OSUrGdWH-i0 Q4. What should I do if my wireless devices cannot connect to Deco?

Refer to the guide https://www.tp-link.com/support/faq/2718/

Q5. What should I do if Deco suddenly lost internet access?

Refer to the guide https://www.tp-link.com/support/faq/2428/

Q6. How can I find a suitable spot for my Deco?

Refer to the guide https://www.tp-link.com//support/faq/1446/

Q7. What can I do if the Deco app isn't working properly?

Refer to the guide https://www.tp-link.com/support/faq/1456/

7 Authentication FCC Compliance Information Statement Product Name: AXE5400 Whole Home Mesh Wi-Fi 6E AP Model Number:

HX716 Pro Component Name I.T.E Power Supply Model T120200-2B4 Responsible party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 8 Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. FCC regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-

6.425GHz band is prohibited for control of or communications with unmanned aircraft systems. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2023-09-13 9 FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120200-2B4 Responsible party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 10 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2023-09-13 11 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400MHz2483.5MHz (20dBm) 5150MHz5250MHz (23dBm) 5250MHz5350MHz (23dBm) 6105MHz6425MHz (23dBm) Frequency band 5150 - 5250 MHz:

Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band. Frequency band: 5250 - 5350 MHz:

Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted. EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. 12 National restrictions Attention: This device may only be used indoors in all EU member states and EFTA countries, and Northern Ireland. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI) UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

National restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 13 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz

, 5470- 5725 MHz. Avertissement:

Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz

, 5470- 5725 MHz. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 27 cm de distance entre la source de rayonnement et votre corps. ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. 14 Les rglementations ISED limitent le fonctionnement de cet appareil une utilisation en intrieur uniquement. Lutilisation de cet appareil est interdite sur les plates-formes ptrolires, les voitures, les trains, les bateaux et les avions, sauf que lutilisation de cet appareil est autorise dans les avions long courrier en vol au-dessus de 10000 pieds. Lexploitation dmetteurs dans la bande 5,925-7,125 GHz est interdite pour le contrle ou les communications avec des systmes davions sans pilote. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice & BSMI Notice:

15 Equipment name:

AXE5400 Whole Home Mesh Wi-Fi 6E System Type designation (Type) Deco XE75 Pro Unit PCB Restricted substances and its chemical symbols Lead Mercury Cadmium

(Pb)

(Hg)

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls Polybrominated diphenyl ethers

(PBB)

(PBDE) 1. 0.1 wt % 0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. 16

. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Operating Temperature: 0C~40C (32F~104F) This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbols may vary from products. Note: The product label can be found at the bottom of the product and its I.T.E. power supply. 17 Symbol Explanation Class II equipment Class II equipment with functional earthing Alternating current DC voltage Polarity of output terminals Indoor use only Dangerous voltage Caution, risk of electric shock Energy efficiency Marking Protective earth Earth Frame or chassis Functional earthing 18 Symbol Explanation Caution, hot surface Caution Operators manual Stand-by ON/OFF (push-push) Fuse Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Caution, avoid listening at high volume levels for long periods Disconnection, all power plugs m Switch of mini-gap construction 19 Symbol Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US) Explanation Switch without contact gap (Semiconductor switching device) 20

Deco XE75 Pro Superior Mesh Wi-Fi, Everywhere User Guide AXE5400 Tri-Band Mesh Wi-Fi 6E System 1910013319 REV2.0.0 2023 TP-Link Contents About This Guide 1 Appearance 2 Set Up Your Deco 3 Troubleshooting 7 Authentication 8 About This Guide This guide provides a brief introduction to AXE5400 Whole Home Mesh Wi-Fi 6E System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience. Conventions In this guide, the following conventions are used:

Convention Description Deco Stands for Deco Whole Home Mesh Wi-Fi System/

Unit. Underline Hyperlinks are in teal and underlined. You can click to redirect to a website or a specific section. Key information appears in teal, including management page text such as menus, items, buttons and so on. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. Teal Note:

Tips:

More Info Specific product information can be found on the product page at https://www.tp-link.com. A Technical Community is provided for you to discuss our products at https://community.tp-link.com. Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support. Speed/Coverage/Device Quantity Disclaimer Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. MU-MIMO Disclaimer Use of MU-MIMO requires clients to also support MU-MIMO. IoT Compatibility Disclaimer IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use. Seamless Roaming Disclaimer Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device. HomeShield Disclaimer HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information. 1 Appearance Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation below:

Tip: The product label can be found at the bottom of the product. Pulse Yellow:

Deco is resetting. Solid Yellow:

Deco is starting up. Pulse Blue:

Deco is ready for setup. Solid Blue:

Deco is setting up. Pulse Green:

Deco is upgrading firmware. Solid Green:

Deco is all set up and connected. Pulse Red:

The satellite Deco is disconnected from the main Deco. Solid Red:

Deco has an issue. 1 Gigabit & 2.5 Gigabit Ethernet Port:

For connecting Deco to your modem, the Ethernet outlet, or for other internet services. Power Slot:

For connecting Deco to the power socket via the provided power adapter. Reset Button:

Press for 1 second and release to reset Deco to factory default settings. The light changing from pulsing yellow to solid yellow indicates a successful reset. 2 Set Up Your Deco First let's start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup. 1. Get the Deco app 2. Log in or sign up with TP-Link ID 3. Select your Deco model Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet. Open the app and log in with your TP-Link ID. If you dont have a TP-Link ID, create one first. Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password. Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network. or 3 4. Plug in your Deco 5. Connect to your Deco's Wi-Fi 6. Specify your Deco's location Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect your Deco directly to the Ethernet outlet. Connect your phone/tablet to the Deco's Wi-Fi using the default SSID printed on the product label. Select or custom a location for your Deco. The location will be used as the name of your Deco. 4 7. Connect your Deco to the internet 8. Create your Wi-Fi network 9. Connect to your Wi-Fi network Select the internet connection type and enter the information. If you are not sure, contact your internet service provider. Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi. Connect your phone/tablet to the Deco's Wi-Fi. 5 10. Setup complete Your Deco network is now up. You can connect your devices to the Deco network. Plug in the other included Decos, and they will automatically join the network within 2 minutes. 6 Troubleshooting Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support Q1. What should I do if I fail to configure the main Deco and get stuck on We couldn't find Deco?

Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM Q2. What should I do if I fail to configure the satellite Deco and get stuck on We couldn't find another Deco?

Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4 Q3. What should I do if I fail to configure the main Deco and get stuck on Testing Internet Connection?

Refer to the video https://youtu.be/OSUrGdWH-i0 Q4. What should I do if my wireless devices cannot connect to Deco?

Refer to the guide https://www.tp-link.com/support/faq/2718/

Q5. What should I do if Deco suddenly lost internet access?

Refer to the guide https://www.tp-link.com/support/faq/1454/

Q6. How can I find a suitable spot for my Deco?

Refer to the guide https://www.tp-link.com//support/faq/1446/

Q7. What can I do if the Deco app isn't working properly?

Refer to the guide https://www.tp-link.com/support/faq/1456/

7 Authentication FCC Compliance Information Statement Product Name: AXE5400 Whole Home Mesh Wi-Fi 6E System Model Number: Deco XE75 Pro Component Name I.T.E Power Supply Model T120200-2B4 Responsible party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 8 Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2022-12-22 9 FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120200-2B4 Responsible party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 10 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2022-12-22 11 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400MHz2483.5MHz (20dBm) 5150MHz5250MHz (23dBm) 5250MHz5350MHz (23dBm) 6105MHz6425MHz (23dBm) Frequency band 5150 - 5250 MHz:

Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band. Frequency band: 5250 - 5350 MHz:

Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted. EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. 12 National restrictions Attention: This device may only be used indoors in all EU member states and EFTA countries, and Northern Ireland. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI) UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

National restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 13 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz. ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. Avertissement:

Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 14 ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. Les rglementations ISED limitent le fonctionnement de cet appareil une utilisation en intrieur uniquement. Lutilisation de cet appareil est interdite sur les plates-formes ptrolires, les voitures, les trains, les bateaux et les avions, sauf que lutilisation de cet appareil est autorise dans les avions long courrier en vol au-dessus de 10000 pieds. Lexploitation dmetteurs dans la bande 5,925-7,125 GHz est interdite pour le contrle ou les communications avec des systmes davions sans pilote. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice & BSMI Notice:

15 Equipment name:

AXE5400 Whole Home Mesh Wi-Fi 6E System Type designation (Type) Deco XE75 Pro Unit PCB Restricted substances and its chemical symbols Lead Mercury Cadmium

(Pb)

(Hg)

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls Polybrominated diphenyl ethers

(PBB)

(PBDE) 16 1. 0.1 wt % 0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption.

. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Operating Temperature: 0C~40C (32F~104F) 17 This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbol Explanation DC Voltage Alternating current Caution Operators manual Indoor use only Polarity of d.c. power connector Energy efficiency marking Class II equipment RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 18

fy Jy Model: HX716 Pro

| tp li n k AXE5400 Whole Home Mesh Wi-Fi 6E AP Power: 12V===2A Default Access: tip//eoiniwifinet |MTTIANIMNNMIINNAT ANIA ATI Model:HX716 Pro(EU1) Ver:1.0

= P SN:XXXXXXXXXXXXX BY AAALAC TAA MADE IN CHINA Wireless Password/PIN:XXXXXXXX indoor use only SSID:TP-Link_XXXX ree D2 AX JaXETOVS 7 SSID:TP-Link_XXXX_6G ink Corporation Limite Suite 901, New East Ocean ieee Tsim Sha Tsui, HongKong A\TIil ResHS ENZO AL LL CONVERSION TABLE 0 60 7 rm 90 9010010 20 OF Of 09 OL OF 9% Of OF 0 OD 6 OO oF uunyacanpanengeenageanageet agence pera EUR INNATE Z OF OF OF OO OL OF OG ODT O GF OC OF OF OF OL OB OF ODEO oz ot oF oF 0 06 09Z Ob OF OF OF OF OD OL OF OG ODEO OF OC Or OF 09 OL Oe 05 OOF ilvvnluvvnavesbueatonetonatuvnliyiaivantaytiante

1 2 3 4 5 6 7 8 9 7202508775 A B C D E R3.5 4mm 7.9mm 0.5mm AXE5400 Whole Home Mesh Wi-Fi 6E System Power: 12V 2A Model: Deco XE75 Pro FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 HVIN: Deco XE75V3 Model: Deco XE75 Pro(US) Ver:3.0 S/N:XXXXXXXXXXXXX MAC:XX-XX-XX-XX-XX-XX SSID:Deco_XXXX PASSWORD:XXXXXXXXXXXXXXXX MADE IN CHINA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. indoor use only C2 0.5mm PASSWORD MAC:XX-XX-XX-XX-XX-XX SSID:Deco_XXXX 43*22mm 0.2R3.5,C2 20*5(7210500231) 1S/N MAC SSIDPASSWORD 2 MACXXXXXXXXXXXXXX-XX-XX-XX-XX-XX SSIDDeco_XXXXMAC PASSWORD XXXXXXXXXXXXXXXX 16 3 QR CODE 10*10 mm1MM WIFI:T:Type;S:SSID;P:PASSWORD;M:Model;C:Country;V:Version;;

TypeWPASSIDPASSWORD16model BOMpackCountryVersion ERP WIFI:T:WPA;S:Deco_XXXX;P:XXXXXXXXXXXXXXXX;M:Deco M4;C:US;V:1.0;;

WIFI:T:WPA;S:Deco_XXXX;P:;M:Deco M4;C:US;V:1.0;;

1 2 3 4 5 6 7 8 9 Deco XE75 Pro(US) 3.0_ A1 50#PET+

-169 Deco XE75 Pro(US) 3.0 2023-04-12 Pantone 877C Pantone 877C Pantone 877C A B C D E

A B C 1 2 3 7202509422 43 8.1mm 2 2 AXE5400 Whole Home Mesh Wi-Fi 6E System Model: Deco XE75 Power: 12V 2A FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 HVIN: Deco XE75 PROV3 4 R3.5 5 6 7 8 9 S/N:XXXXXXXXXXXXX US/3.0 MAC:XX-XX-XX-XX-XX-XX SSID:Deco_XXXX PASSWORD:XXXXXXXXXXXXXXXX indoor use only MADE IN CHINA C2 0.5mm PASSWORD MAC:XX-XX-XX-XX-XX-XX SSID:Deco_XXXX 0.5mm 43*22mm 0.2R3.5,C2 20*4(7210500055) 1S/N MAC SSIDPASSWORD 2 MACXXXXXXXXXXXXXX-XX-XX-XX-XX-XX SSIDDeco_XXXXMAC PASSWORD XXXXXXXXXXXXXXXX 16 4 QR CODE 10*10 mm1MM WIFI:T:Type;S:SSID;P:PASSWORD;M:Model;C:Country;V:Version;;

TypeWPASSIDPASSWORD16 D modelBOM packCountryVersionERP WIFI:T:WPA;S:Deco_XXXX;P:XXXXXXXXXXXXXXXX;M:Deco M4;C:US;V:1.0;;

WIFI:T:WPA;S:Deco_XXXX;P:;M:Deco M4;C:US;V:1.0;;

E 1 2 3 4 5 6 Deco XE75(US) 3.0_ A2 50#PET+

-169 Deco XE75(US) 3.0 2023-08-14 HVIN 7 Pantone 877C Pantone 877C Pantone 877C 8 9 A B C D E

TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Certification Application Attestation Statements Date: March 7, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) _____TP-Link Corporation Limited______ certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) ____ TP-Link Corporation Limited_______ (the applicant) certifies that, as of the date of the filing of this application, the applicant - is /- is not identified on the Covered List as an entity producing covered equipment. Thank you, By:

(Signature2) ____Sarah Wang__

(Print name) Title:

Compliance manager Company:

TP-Link Corporation Limited_____ Telephone: +86 755 21534921 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 012423-17 rev2

VISHTEC LLC U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falis Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d){7) Information Desiqnated U.S. Agent Company Name:ViSHTEC LLC Contact Name:Alan Graham Street Address:9888 W Belleview Ave Ste 2142 Denver City/Province/Zip:co 80123 Telephone No:(571) 400 7350 Email:alan.graham@vish-tec.com FRN #: 0033407131 This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d){7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date:04/12/2023 For andon behelfof WESTER LEA Signed by (Printed Name/Title): Pho Alan Graham/ Compliance manager eater oe ad Signaimrets}

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TP-Link Corporation Limited Grantee Code: 2AXJ4 FRN; 0029962685 Contact Name: Sarah Wang Street Address:Room 901 ,9/F.,New East Ocean Centre,9 Science Museum Road,Tsim Sha Tsui,Kowloon City/ Province/ Zip:Hong Kong Telephone No: 00852 -37585503 Email:sarah.wang@tp- link.com Applicant Signature: Sarah Wore Date: oY [7] ws Signed by (Printed Name/Title):Sarah Wang / Compliance Manager

C2PC Request Letter Federal Communications Commission Authorization and Evaluation Division Subject:

Class II permissive change for FCC ID: 2AXJ4XE75V3

(Original Grant Date: 08/20/2023) Applicant: TP-Link Corporation Limited Dear Sirs, This is to request a class II permissive change for FCC ID: 2AXJ4XE75V3, original grant date: 08/20/2023. The major change filed under this application is as outlined below:

Open the NII-2a/-2c bands and Beamforming function Via software and we attest that there is no hardware change to this EUT. The model name was changed to HX716 Pro. In addition: Refer to KDB 442812 D01 SDR apps Guide v02r03, this router was defined as Non-SDR device by the applicant. If you have any questions regarding this application, please feel free to contact me. Sincerely, _________________ Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-11-03

Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AXJ4XE75V3 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ____________ Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-11-3

Declaration of Authorization We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

Address:

MRT Technology (Suzhou) Co., Ltd D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone Suzhou China City:

Country:

is authorized to apply for Certification of the following product(s):

AXE5400 Whole Home Mesh Wi-Fi 6E AP 2AXJ4XE75V3 HX716 Pro tp-link Product:

FCC ID:

Model:

Brand:

Sincerely, _________________ Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-11-03

Non-SDR (Software Defined Radio) Cover Letter Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

Yes - go to 2. No, not an SDR No 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Yes, must be an SDR. No - go to 3. No 3. Is the device capable of operating in any other in any other way than granted, or will be, granted?

Yes, - go to 4. No - go to 5. No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. No, Not an SDR No Conclusion:

According to the above questions reply, we can confirm this device (FCC ID: 2AXJ4XE75V3 &

IC: 26583-XE75V3) must be a Non-SDR device. __________________ Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-11-16

Letter of Declaration on Indoor Access Point (6ID) Operation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern We, TP-Link Corporation Limited (Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong), attest that this Indoor Access Point device complies with the following requirements of Part 15E of the FCCs rules for 6G bands:

Protocol attestation statement:

FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern:

We, TP-Link Corporation Limited, attest that this low-power indoor access point complies with the following requirements of Part 15E of the FCC' rules for the 5.925~7.125 GHz band:

1. This devices transmit power spectral density is in accordance with the rules for low power indoor access points. 2. Contention-based protocol, as demonstrated in the test report, is permanently embedded in the chip (IPQ0518+QCN6102+QCN6122+RTL8367SC-CG+RTL8221B-VB-CG) and is not host-

dependent. 3. An 11ax IEEE APs Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is embedded in this devices signals and used to tell the connecting clients/subordinate that the max TX powers it is allowed to transmit. There is a regulatory info field in this devices beacon and probe response frames which detail this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet only in the 5.925-6.425 GHz band. 3. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, _________________ Name:

Sarah Wang Position: Regulatory Compliance Manager Date:

2023-11-16

TP-Link Corporation Limited Authority to Act as Agent Date: April 24, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch__is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: ____4/24/2024 By:

__________________________ ___________Sarah Wang_____________

(Signature1)

(Print name) Title:

__________Lead of Product Certification Team________________ On behalf of: _________TP-Link Corporation Limited._________________________________

(Company Name) Telephone:

_______________+86 755 2661 5494___________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

TP-Link Corporation Limited. Request for Confidentiality Date: September 13, 2023 Subject: Confidentiality Request for: ___ 2AXJ4XE75V3____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit Permanent Block Diagrams

--------------------------- External Photos Permanent *1 Internal Photos Permanent Operation Description/Theory of Operation Permanent Parts List & Placement/BOM Permanent Tune-Up Procedure Permanent Schematics

--------------------------- Test Setup Photos Permanent *1 Users Manual TP-Link Corporation Limited.has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ (specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications:

Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing) . Sincerely, By:

(Signature/Title3) __________ Sarah Wang ______________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

TP-Link Corporation Limited Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Attn: OET Dept. Ref:

FCC Class II Permissive Change for FCC ID: 2AXJ4XE75V3

(Original Grant date: 08/20/2023) Applicant: TP-Link Corporation Limited. Dear Examiner, This is to request a Class II permissive change for FCC ID: 2AXJ4XE75V3, originally granted on 08/20/2023 The change file under this application is:

Listing new model Deco XE75 to an existing grant under 2AXJ4XE75V3, and adding euipment code 6PP to this FCC ID: 2AXJ4XE75V3. The new model Deco XE75 has the same RF technical construction including circuit diagram, PCB Layout, components, component layout and performance with Deco XE75 Pro. Only the model name is different and Network port design difference, Deco XE75 Pro 3.0 network port is 2*1G+1*2.5G and XE75 3.0 network port is 3*1G If you have any questions regarding this application, please feel free to contact me. Best Regards, Sarah Wang ________________________ __________________

(Signature*)

(Print name) E-mail: sarah.wang@tp-link.com

TP-Link Corporation Limited Address: Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kon We, TP-Link Corporation Limited Deco XE75 has the same RF technical construction including circuit diagram, PCB Layout, components, component layout and performance with Deco XE75 Pro. Only the model name is different and Network port design difference, XE75 Pro 3.0 network port is 2*1G+1*2.5G and XE75 3.0 network port is 3*1G Sincerely, By:

__________________________ __________ Sarah Wang ______________

(Signature/Title)

(Print name)

Declaration of Frequency Stability We [TP-Link Corporation Limited] ensure that the product (FCC ID: 2AXJ4XE75V3, IC:26583-

XE75V3) meets e-CFR Title 47 section 15.407(g) and KDB 789033 D02v02r01 frequency stability such that the emissions are maintained within the band of operation under all conditions of normal operation as specified in the user's manual. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-9-13

Declaration of Conformity We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that:

Product:

FCC ID:

Model:

Brand:

AXE5400 Whole Home Mesh Wi-Fi 6E System 2AXJ4XE75V3 Deco XE75 Pro, Deco XE75 tp-link Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-9-13

Attestation Letter Federal Communications Commission Authorization and Evaluation Division We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. AXE5400 Whole Home Mesh Wi-Fi 6E System 2AXJ4XE75V3 Deco XE75 Pro, Deco XE75 tp-link Product:

FCC ID:

Model:

Brand:

Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-9-13

TP-Link Corporation Limited. Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Letter of Declaration on Indoor Subordinate Operation Date: 2023-09-21 FCC ID : 2AXJ4XE75V3 To Whom It May Concern:

We, TP-Link Corporation Limited., attest that this device under FCC ID 2AXJ4XE75V3 complies with device protocol requirements and operational restrictions:

Protocol attestation statement:

1. This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 2. Once under control of an indoor access point, a subordinate will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling the subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6PP. 3. An 11ax/11be IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-

powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in the 5.9256.425 GHz bands in large aircraft while flying above 10,000 feet. 3. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. 4. When configured for subordinate mode, this device has no direct connection to the internet. Respectfully, Applicant's company name

: TP-Link Corporation Limited. Applicant's company address Tsui, Kowloon, Hong Kong

: Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Signature

Name and Job Title

: Regulatory Compliance Manager E-mail Tel.

: cert@tp-link.com

: 86-755-21534921

Non-SDR (Software Defined Radio) Cover Letter Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

Yes - go to 2. No, not an SDR No 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Yes, must be an SDR. No - go to 3. No 3. Is the device capable of operating in any other in any other way than granted, or will be, granted?

Yes, - go to 4. No - go to 5. No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. No, Not an SDR No Conclusion:

According to the above questions reply, we can confirm this device (FCC ID: 2AXJ4XE75V3 , IC:26583-XE75V3) must be a Non-SDR device. Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-9-13

Letter of Declaration on Indoor Access Point (6ID) Operation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern We, TP-Link Corporation Limited (Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong), attest that this Indoor Access Point device complies with the following requirements of Part 15E of the FCCs rules for 6G bands:

Protocol attestation statement:

FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern:

Indoor Access Point 6ID:

We, TP-Link Corporation Limited attest that this low-power indoor access point complies with the following requirements of Part 15E of the FCC' rules for the 5.925~7.125 GHz band:

1. This devices transmit power spectral density is in accordance with the rules for low-

power indoor access points. 2.Contention-based protocol, as demonstrated in the test report, is permanently embedded in the chip (IPQ0518+QCN6102+QCN6122+RTL8367SC-CG+RTL8221B-VB-CG) and is not hostdependent. 3. An 11ax IEEE APs Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is embedded in this devices signals and used to tell the connecting clients/subordinate that the max TX powers it is allowed to transmit. There is a regulatory info field in this devices beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet only in the 5.925-6.425GHz band. 3. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-09-13

Declaration of Conformity We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that:

Product:

FCC ID:

Model:

Brand:

AXE5400 Whole Home Mesh Wi-Fi 6E System 2AXJ4XE75V3 Deco XE75 Pro tp-link Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-6-20

Attestation Letter Federal Communications Commission Authorization and Evaluation Division We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. AXE5400 Whole Home Mesh Wi-Fi 6E System 2AXJ4XE75V3 Deco XE75 Pro tp-link Product:

FCC ID:

Model:

Brand:

Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-7-12

Letter of Declaration on Indoor Access Point (6ID) Operation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern We, TP-Link Corporation Limited (Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong), attest that this Indoor Access Point device complies with the following requirements of Part 15E of the FCCs rules for 6G bands:

Protocol attestation statement:

FCC ID: 2AXJ4XE75V3 IC: 26583-XE75V3 To Whom It May Concern:

Indoor Access Point 6ID:

We, TP-Link Corporation Limited attest that this low-power indoor access point complies with the following requirements of Part 15E of the FCC' rules for the 5.925~7.125 GHz band:

1. This devices transmit power spectral density is in accordance with the rules for low-

power indoor access points. 2.Contention-based protocol, as demonstrated in the test report, is permanently embedded in the chip (IPQ0518+QCN6102+QCN6122+RTL8367SC-CG+RTL8221B-VB-CG) and is not hostdependent. 3.An 11ax IEEE APs Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is embedded in this devices signals and used to tell the connecting clients/subordinate that the max TX powers it is allowed to transmit. There is a regulatory info field in this devices beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. 3. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-08-03