User Guide AC750 Wi-Fi Range Extender RE200 REV2.0.0 1910012003 Contents About This Guide .........................................................................................................1 Chapter 1. Get to Know About Your Extender. . . . . . . . . . . . . . . . . . . . . . . . .2 1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. 1. LED Explanation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. 2. Port and Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 2. Set Up Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2. 1. Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 1. 1. Method One: Via the WPS Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 1. 2. Method Two: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2. 1. 3. Method Three: Via the TP-Link Tether App . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 2. 2. Position Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Chapter 3. Customize Your Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. 1. Check Internet Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 3. 2. Configure Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 3. 3. Change LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. Specify DHCP Server Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 3. 5. Adjust Wi-Fi Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 3. 6. Set Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Chapter 4. More Features of Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . 21 4. 1. Use Your Extender as a Wireless Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 4. 2. Transform Your Existing Wired Network to a Wireless One . . . . . . . . . . . . . . . . . . .22 4. 2. 1. To Set Up the Extender as an Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . .22 4. 2. 2. To Connect Your Wireless Devices to the Extender via WPS. . . . . . . . . . .24 Chapter 5. Manage Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5. 1. Set Up System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 5. 2. Control LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 5. 3. Power Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 5. 4. Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 5. 5. Backup and Restore Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 5. 6. Change Login Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 5. 7. System Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 FAQ ................................................................................................................................33 About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. When using this guide, please notice that features of the extender may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide the following conventions are used:
Convention Underlined Teal
>
Note:
Tips:
Description Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, and so on. The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web page click to edit the corresponding entry. click to delete the corresponding entry. More Info The latest software, management app and utility are available from the Download Center at www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the range extender. Specifications can be found on the product page at http://www.tp-link.com. A Technical Support Forum http://forum.tp-link.com. Our Technical Support contact information can be found at Contact Technical Support page at www.tp-link.com/support. is provided for you to discuss our products at 1 Chapter 1 Get to Know About Your Extender This chapter introduces what the extender can do and its appearance. It contains the following sections:
Product Overview Appearance Get to Know About Your Extender Chapter 1 1. 1. Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi dead zones? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached. The device also reduces signal interference to ensure reliable Wi-Fi coverage throughout your home or office. Easy Installation & Quick Position The extender works with any standard wireless router. Instantly connect the extender to a router by pressing the routers WPS button (if available) followed by the extenders RE/WPS button. Alternatively, follow the Quick Setup instructions on the extenders web management page. Once the extender is connected to a router, you can relocate it to your preferred location with no further configuration required. The intelligent signal light can help to find the best location. Easy Management with the TP-Link Tether App Tether provides a simple, intuitive way to access and manage your extender with your smart devices. 1. 2. Appearance 3 Chapter 1 Get to Know About Your Extender LED Explanation 1. 2. 1. You can check the extenders working status by following the LED Explanation table. Name Status Green 2.4G/5G
(Wireless Signal)
(Ethernet)
(Power)
(RE) Solid red Off On Off On Flashing Off On Off On Flashing Off Indication The extender is connected to the 2.4GHz/5GHz wireless network of your host router and is in a suitable location. The extender is experiencing poor signal strength. Please try relocating it closer to your host router. No wireless connection is established. The extenders wireless function is enabled. The extenders wireless function is disabled. A powered-on device is connected to the Ethernet port. The Ethernet port is sending or receiving data. No powered-on device is connected to the Ethernet port. The extender is on. The extender is off. WPS connection is established. WPS connection is being established. No active connection. Port and Button Description 1. 2. 2. Ports or Buttons Description
(WPS Button) Reset (Hole) Ethernet Port of the extender should change to solid on, Press the WPS button on your host router, and immediately press on the extender. The LED indicating successful WPS connection. Use a pin to press and hold the Reset button until all the LEDs flash once to reset the extender. Connect your Ethernet-only device to the Ethernet port of the extender to join the Wi-Fi network. 4 Set Up Internet Connection This chapter informs you how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections:
Quick Setup Position Your Extender Chapter 2 Set Up Internet Connection is solid on. 2. 1. Quick Setup Power on Plug the extender into an electrical outlet next to your host router, and then wait until the LED Connect to the host network There are two ways to connect to the host network: via the WPS button, via a web browser or via the TP-Link Tether app. Using the WPS button is the easiest way to extend your host network. We recommend you to use this way if your router has a WPS button. The button might look like one of these: | | . 2. 1. 1. Method One: Via the WPS Button 1. Press the WPS button on your host router, and then press the button on the WPS extender within 2 minutes. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to For more information about using WPS button on your host router, please refer to the router Tips:
Method Two: Via a Web Browser. manufacturers user guide. 2. Wait until the LED changes to solid on, which indicates that the WPS connection is successful. If it doesnt, please refer to Method Two: Via a Web Browser. 3. If you are connecting the extender to a dual-band router but only the 2.4GHz or 5GHz LED is on, repeat Step 1 and 2 to connect to the other band. 4. Enjoy! Connect to the extended network and enjoy the internet. Both extended networks share the same SSIDs (network names) and passwords as those of your host networks. Tips: Since the performance of the extended networks will be affected by the distance between extender and host router, we recommend that you relocate your extender by referring to Position Your Extender. 6 Chapter 2 Set Up Internet Connection 2. 1. 2. Method Two: Via a Web Browser 1. Connect your computer to the extender's wireless network. Tips: Before connecting, please find the SSID (network name) on the label of the extender. For Windows Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon on the taskbar and connect to the extenders wireless network: TP-Link_Extender_2.4GHz or TP-Link_Extender_5GHz. Connections are available Wireless Network Connection TP-Link_Extender_2.4GHz TP-Link_Extender_5GHz Connect automatically Connect For Mac OS X Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon in the top right corner of the screen, and connect to the extenders network: TP-Link_Extender_2.4GHz or TP-Link_Extender_5GHz. Wi-Fi: On Turn Wi-Fi O(cid:20) TP-Link_Extender_2.4GHz TP-Link_Extender_5GHz Join Other Network... Create Network... Open Network Preferences... 2. Follow the instructions of Quick Setup Wizard to connect the extender to your host router. 1 ) Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address field, and then create a password for future login attempts, and click Start. 7 Chapter 2 Set Up Internet Connection Tips: If the login window does not appear, please refer to FAQ. 2 ) Select your host routers 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. 3 ) Select your host routers 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. Tips: If your host router does not support 5GHz wireless network, please click Skip to continue. 4 ) Either keep the default SSIDs (network names) or customize them for the extended networks, and then click Next. 8 Chapter 2 Set Up Internet Connection 5 ) Verify your wireless settings and click Save. The corresponding LED(s)(2.4GHz or 5GHz) should turn on. 9 Chapter 2 Set Up Internet Connection 6 ) Enjoy! Connect to the extended network and enjoy the internet. Both extended networks share the same wireless passwords as those of your host networks, but may have different network names if you have customized the SSIDs during the configuration. Tips: Since the performance of the extended network will be affected by the distance between extender and host router, we highly recommend you to relocate your extender referring to Position Your Extender. 2. 1. 3. Method Three: Via the TP-Link Tether App 1. Launch the Apple App Store or Google Play Store and search TP-Link Tether or simply scan the QR code to download and install the app. OR 2. Go to Wi-Fi Settings and connect your device to the extenders wireless network:
TP-Link_Extender_2.4GHz or TP-Link_Extender_5GHz.
< Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... TP-Link_Extender_2.4GHz TP-Link_Extender_5GHz Other... 10 Chapter 2 3. Launch Tether and select your extender from the Local Device list. Set Up Internet Connection 4. Create a password for future logins and click Create. 5. Follow the on-screen instructions to complete the configuration. Tips: You can manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices. 2. 2. Position Your Extender Please follow the instructions below to achieve optimal performance of the extender. 1. Plug the extender into an electrical outlet between your host router and the Wi-Fi dead zone. The location you choose must be within the range of your existing host network. 2. Wait until the 2.4G/5G LED is lit and solid green. If not, relocate it closer to the host router to achieve better signal quality. 11 Chapter 2 Set Up Internet Connection Host Network Extended Network Router Ideal Extender Placement Clients Tips: To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors. 12 Chapter 2 Customize Your Network This chapter guides you on how to configure network settings that are available for this extender. It contains the following sections:
Check Internet Status Configure Wireless Network Change LAN Settings Specify DHCP Server Settings Adjust Wi-Fi Coverage Set Access Control Chapter 3 3. 1. Check Internet Status You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Status to view the internet status of your extender. The extender is functioning normally. The extender is not connected to the host networks. Please go to Settings >
Wireless > Connect to Network to check the passwords of the host networks. If the problem still exists, please refer to the FAQ section. The extender is connected to the host network, but is not transmitting data. Please check your routers internet connection. The extender is connected to the router abnormally. Please go to Settings >
Network and try setting your extender to obtain an IP address automatically. icon to view corresponding Internet/Router/Range Extender/Clients Click the information. 3. 2. Configure Wireless Network If you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended networks. 14 Chapter 3Customize Your Network Visit http://tplinkrepeater.net, and log in with the password you set for the extender. Note: Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender, please refer to the instructions to set your 5GHz network. To extend another host network:
1. Go to Settings > Wireless > Connect to Network. 2. Enable Connect to 2.4GHz Network and click Wireless Scanner to find all available networks. 3. Select the 2.4GHz host network you want to extend. Note:
If the network you want to extend is on but not listed, please try the following steps. Move the extender closer to your router, and click Rescan in the top-right corner of the list. You can manually enter the SSID (network name) and password of the network you want to extend, and click Save. 4. Once a host network is selected, the SSID and security type will be automatically filled in. If the selected network is encrypted, enter the password in the Password field. 5. Click Save. To enable or disable the extended network:
1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid. 15 Chapter 3Customize Your Network 3. Click Save. To change the wireless network name (SSID):
1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value is case-sensitive. 3. Click Save. Note: If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied. Please write down the new SSID for future use. To hide the SSID of the extended network:
1. Go to Settings > Wireless > Extended Network. 2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed when wireless devices scan for local wireless networks. Devices must join the network manually in order to connect. 3. Click Save. 3. 3. Change LAN Settings The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to the web management page. The LAN IP address, together with the Subnet Mask, also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address. 4. Enter a new IP address as needed and leave the Subnet Mask as the default settings and enter the gateway that is in the same subnet as the IP address. The gateway is usually the LAN IP address of your extender. 16 Chapter 3Customize Your Network 5. Click Save. 3. 4. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. To specify the IP address that the extender assigns:
1. Select Auto (recommended) or On to enable the DHCP Server. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP requires them. The Default Gateway is automatically 4. Click Save. filled in and is the same as the LAN IP address of the extender. 17 Chapter 3Customize Your Network To view the DHCP Client List:
You can view the information of the DHCP clients connected to the extender in the DHCP Client List. 3. 5. Adjust Wi-Fi Coverage You can set the extenders Wi-Fi coverage depending on how large you want your Wi-Fi area to be. 1. Visit http://tplinkrepeater.net and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Wi-Fi Coverage. 3. Select Min, Mid or Max to adjust your Wi-Fi coverage of the extender. 4. Click Save. 3. 6. Set Access Control Access Control allows you to permit or block specific devices from accessing the internet for a specific period. 1. Visit http://tplinkrepeater.net and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Access Control. 18 Chapter 3Customize Your Network 3. Enable Access Control. To block specific device(s):
Note: Devices connected to the extender via an Ethernet cable cannot be blocked. 1. Select Blacklist and click Save. corresponding checkbox. 2. Select the device to be blocked in the Online Devices table by ticking the 3. Click Block and the selected device(s) will be added to the Devices in Blacklist table. 4. Click in the Devices in Blacklist table to set the Effective Time for a certain entry as needed. 19 Chapter 3Customize Your Network 5. Click OK. To permit specific device(s):
1. Select Whitelist and click Save. 2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed. 3. Click OK. 20 Chapter 3Customize Your Network More Features of Your Extender This chapter explains how to use the extender as a wireless adapter and as an access point. It contains the following sections:
Use Your Extender as a Wireless Adapter Transform Your Existing Wired Network to a Wireless One Chapter 4 4. 1. Use Your Extender as a Wireless Adapter The extender can be used as a wireless adapter to connect any wired-only device, such as a Blu-ray player, game console, DVR, or smart TV, to your wireless network. After configuration, you can connect an Ethernet-enabled device to the extender via an Ethernet cable. Note: Extenders that have no Ethernet port do not support this feature. Router By default, the Ethernet port of the extender is connected to the 5GHz wireless netwok. To change the connected wireless frequency:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. 3. Select 2.4GHz or 5GHz and click Save. 4. 2. Transform Your Existing Wired Network to a Wireless One The extender can work as an access point, transforming your existing wired network to a wireless one. 4. 2. 1. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Click Mode in the top right corner of the page. Select Access Point and click Save. To Set Up the Extender as an Access Point The extender will reboot and switch to Access Point mode. 22 Chapter 4More Features of Your ExtenderSmart TVGame ConsoleDesktop 3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable. 4. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 5. Go to Quick Setup to configure your extender. 1 ) Configure your wireless settings and click Next. 2 ) Confirm the information and click Finish. Now, you can enjoy Wi-Fi. 23 Chapter 4More Features of Your Extender To Connect Your Wireless Devices to the Extender via WPS 4. 2. 2. Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection. Wireless devices that support WPS, including Android phones, tablets and most USB network cards, can be connected to your extender through this method (not supported by iOS devices). 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Wireless > WPS. 3. Enable WPS. 4. Connect via WPS:
APs PIN: Enable APs PIN and enter the PIN on your device. You can click Generate to get a new PIN or click Default to restore the PIN to its factory one. Push Button (Recommended): Click Connect and push the WPS button on the client device. 24 Chapter 4More Features of Your Extender PIN code: Enter the clients PIN, and click Connect. 25 Chapter 4More Features of Your Extender Chapter 5 Manage Your Extender This chapter presents how to manage and maintain your extender. It contains the following sections:
Set Up System Time Control LEDs Power Schedule Upgrade the Firmware Backup and Restore Configuration Settings Change Login Password System Log Manage Your Extender 5. 1. Set Up System Time The System Time of the extender will be used for time-based functions such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings. To get system time:
1. Select your local Time Zone from the drop-down list. 2. Click Save. To set up Daylight Saving Time:
1. Select Enable Daylight Saving Time. zone. 2. Select the Start and End date and time of the daylight saving time at your local time 3. Click Save. 5. 2. Control LEDs The LEDs of the extender indicate its activities and status. You can enable the Night Mode feature to specify a time period during which the LEDs are off. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 27 Chapter 5 Manage Your Extender 2. Go to Settings > System Tools > LED Control. To specify a time period when LEDs are off:
1. Select Night Mode. 2. Specify a time period in the LED Off Time field, and the LEDs will be off during this period. 3. Click Save. 5. 3. Power Schedule The Power Schdule feature allows you to specify a time period during which the extender is off. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Power Schedule. To specify a time period when the extender is off:
1. Select Enable Power Schedule. 2. Specify a time period in the Power-Off Time field and days in the Day(s) field, and the extender will be off during this period. 28 Chapter 5 Manage Your Extender 3. Click Save. 5. 4. Upgrade the Firmware TP-Link is committed to improving product features, giving you a better network experience. You can upgrade the firmware online or download the latest firmware file from the Support page at our website www.tp-link.com and upgrade the extender to the latest firmware version. Note:
Make sure the latest firmware file is matched with the hardware version (as shown in the download section of the Support page). Make sure that you have a stable connection between the extender and your computer. It is NOT recommended to upgrade the firmware wirelessly. Backup your extender configuration. Do NOT power off the extender during the firmware upgrade. To upgrade the firmware online:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Firmware Upgrade, and click Check for upgrade to see whether a new firmware is released. 3. Focus on the Online Upgrade section, and click Upgrade. 4. Wait a few minutes for the firmware upgrade to complete and the extender to reboot. To upgrade the firmware locally:
1. Download firmware from our website the extender latest file for the www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 3. Go to Settings > System Tools > Firmware Upgrade. 4. Click Browse to locate the downloaded new firmware file, and then click Upgrade. 29 Chapter 5 Manage Your Extender 5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot. 5. 5. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can backup the configuration file and restore the extender to the previous settings from the backup file when needed. Moreover, if necessary, you can erase the current settings and reset the extender to the default factory settings. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Backup & Restore. To backup configuration settings:
Click Backup to save a copy of the current settings to your local computer. A .bin file of the current settings will be stored on your computer. To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and click Restore. 2. Wait a few minutes for the restore and reboot. Note: During the restore process, do not power off or reset the extender. 30 Chapter 5 To reset the extender to factory default settings:
1. Click Factory Restore to reset the extender. Manage Your Extender 2. Wait a few minutes for the reset and reboot. Note:
During the reset process, do not power off or reset the extender. We strongly recommend you backup the current configuration settings before resetting the extender. 5. 6. Change Login Password The account management feature allows you to change your login password of the management webpage. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password, then the new password twice (both case-sensitive) and click Save. 4. Use the new password for future logins. 5. 7. System Log If the extender is not working normally, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > System Log. To save the system log locally:
1. Choose the type and level of the system log as needed. 31 Chapter 5 2. Click Save Log to save the system logs to a local disk. Manage Your Extender 32 Chapter 5 FAQQ1. How do I reset the extender to its factory default settings?
With the extender powered on, use a pin to press the Reset button until all the LEDs turn on momentarily and then release the button. Log in to the extenders web management page. Go to System Tools > Restore &
Backup and click Factory Restore. Q2. What should I do if I forget my login password?
Refer to FAQ > Q1 to reset the extender, and create a password to log in. Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password for future use. Q3. What should I do if I forget my wireless password?
The factory default wireless password is printed on the label of the extender. If the password has been altered, please connect your computer to the extender using an Ethernet cable and follow the steps below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Wireless > Wireless Settings to retrieve or reset your wireless password. Q4. What should I do if I cannot access the web management page?
This can happen for a variety of reasons. Please try the following to log in again. If your computer is wirelessly connected, make sure that you have connected to the extenders SSID. If your computer is connected via an Ethernet cable, please make sure that the connection is stable. Make sure your computer is set to obtain an IP address and DNS server address automatically. Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web browser and press Enter. Use the IP address to access the extender. The default IP is 192.168.0.254. If the extender is connected to the router, you should go to your routers DHCP client list to obtain the extenders current IP address. Reset the extender and try again. Q5. I have enabled wireless MAC filter, wireless access control, or access control list (ACL) on my router. What should I do before configuring 33 the extender?
When a device connects through the extender to your router, the MAC address of the device shown on the router is translated to another MAC address. If your routers MAC filter, wireless access control, or ACL is enabled, the devices connected to the extender cannot get an IP address from the extender and cannot access the internet. To solve this problem, please follow the steps below:
1. Log in to your router and disable the MAC filter, wireless access control or ACL. Note: For more information about how to disable your routers MAC filter, wireless access control or ACL, please refer to your routers user guide. 2. Power on your extender, and run the Quick Setup to configure your extender. 3. Connect all of your devices to the extended network, and make sure the routers Link 4. On your router, add all the Online Devices MAC addresses to your routers MAC filter 5. Enable the routers MAC filter, wireless access control, or ACL to complete the LED remains lit. table. configuration. 34 COPYRIGHT & TRADEMARKS is a registered trademark Specifications are subject to change without notice. of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2017 TP-Link Technologies Co., Ltd. All rights reserved. 35 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. CE Mark Warning 36 This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:
1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
37 2. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limitation P.I.R.E.;
3. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements
. NCC Notice & BSMI Notice 38
,
. Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be used in the following countries:
DE HR LV SI BE ES IS NO DK HU MT SK CH FR LI PT CY GB LT RO CZ GR LU SE BG FI IT PL AT EE IE NL Explanations of the symbols on the product label Symbol Explanation Class II equipment AC voltage Indoor use only 39 Symbol Explanation RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 40