FCC ID: TE7AX10 AX1500 Wi-Fi 6 Router

User Guide AX1500 Wi-Fi 6 Router Archer AX10 REV1.0.0 1910012597 Contents About This Guide .........................................................................................................1 Chapter 1. Get to Know About Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. 1. Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. 2. The Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 2. Connect the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 2. 1. Position Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. 2. Connect Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Chapter 3. Log In to Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chapter 4. Work with Alexa and IFTTT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About This Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide the following conventions are used:

Convention Underlined Teal

>

Note:

Tips:

Description Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc. The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web page click to edit the corresponding entry. click to delete the corresponding entry. click to enable or disable the corresponding entry. click to view more information about items on the page.

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

*Use of MU-MIMO and 1024-QAM requires clients to also support those functions. More Info The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the router. 1 Specifications can be found on the product page at https://www.tp-link.com. TP-Link Community https://community.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support. to discuss our products at is provided for you 2 Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections:

Product Overview Appearance Chapter 1 Get to Know About Your Router 1. 1. Product Overview TP-Link AX router, with next-generation 802.11ax Wi-Fi Technology, achieves Wi-Fi performance at its ultimate level. The revolutionary combination of OFDMA, MU-MIMO and 1024QAM improve throughput by 4 times and dramatically increase the whole network capacity and efficiency. Its also backwards compatible with 802.11a/b/g/n/ac. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. 2. Appearance 1. 2. 1. Top Panel The routers LEDs (view from left to right) are located on the front. You can check the routers working status by following the LED Explanation table. LED Explanation LED

(Power) Status On Flashing Off Indication The system has started up successfully. The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. Power is off. 4 Chapter 1 LED Explanation Get to Know About Your Router LED

(2.4GHz Wireless)

(5GHz Wireless)

(Internet)

(Ethernet)

(WPS) Status On Off On Off Green On Orange On Off On Off On/Off Flashing Indication The 2.4GHz wireless band is enabled. The 2.4GHz wireless band is disabled. The 5GHz wireless band is enabled. The 5GHz wireless band is disabled. Internet service is available. The routers Internet port is connected, but the internet service is not available. The routers Internet port is unplugged. At least one powered-on device is connected to the routers LAN port. No powered-on device is connected to the routers LAN port. This light remains on for 5 minutes when a WPS connection is established, then turns off. WPS connection is in progress. This may take up to 2 minutes. 1. 2. 2. The Back Panel The following parts (view from right to left) are located on the back panel. Button and Port Explanation Item Power Port Power On/Off Button Description For connecting the router to a power socket via the provided power adapter. Press this button to power on or off the router. 5 Chapter 1 Get to Know About Your Router Item WAN Port LAN Ports (1/2/3/4) WPS/Wi-Fi Button Reset Button Antennas Description For connecting to a DSL/Cable modem, or an Ethernet jack. For connecting your PC or other wired devices to the router. Press the button for 1 second, and immediately press the WPS button on your client to start the WPS process. Press and hold the button for 2 seconds to turn on or off the wireless function of your router. Press and hold the button until all LEDs turn on to reset the router to its factory default settings. Used for wireless operation and data transmit. Upright them for the best Wi-Fi performance. 6 Chapter 2 Connect the Hardware This chapter contains the following sections:

Position Your Router Connect Your Router Chapter 2 Connect the Hardware 2. 1. Position Your Router The product should not be located in a place where it will be exposed to moisture or excessive heat. Place the router in a location where it can be connected to multiple devices as well as to a power source. Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard. The router can be placed on a shelf or desktop. Keep the router away from devices with strong electromagnetic interference, such as Bluetooth devices, cordless phones and microwaves. 2. 2. Connect Your Router Before you start, turn off your modem, if any, and remove the backup battery if it has one. And place the router horizontally and orient the antennas vertically. Follow the steps below to connect your router. If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the routers WAN port, and then follow steps 3 and 4 to complete the hardware connection. Internet 1 2 3 1. Connect the modem to the routers WAN port with an Ethernet cable. 2. Turn on the modem, and then wait about 2 minutes for it to restart. 3. Connect the power adapter to the router and turn on the router. 4. Verify that the hardware connection is correct by checking the following LEDs. Power On 2.4G On 5G On Internet On 8 Chapter 2 Connect the Hardware Note:

Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds, then release the button. Both the LEDs should turn solid on. 5. Connect your computer to the router. Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Wireless Network Connection TP-Link_XXXX TP-Link_XXXX_5G Connect automatically Connect Smart Device

< Settings Wi-Fi OR Wi-Fi CHOOSE A NETWORK... TP-Link_XXXX TP-Link_XXXX_5G Other... Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router through this method. Note:

WPS is not supported by iOS devices. The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1 ) Tab the WPS icon on the devices screen. Here we take an Android phone for instance. 2 ) Within two minutes, press the WPS button on your router. 9 Chapter 2 Connect the Hardware WLAN On TP-Link MyHome David HomeNetwork TP-Link_Home TP-Link_Router Test close to 10 Chapter 3 Log In to Your Router Chapter 3 Log In to Your Router With a web-based utility, it is easy to configure and manage the router. The web-based utility can be used on any Windows, Mac OS or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer. 2. Visit http://tplinkwifi.net, and create a login password for secure management purposes. Then click Lets Get Started to log in. Note:

If the login window does not appear, please refer to the FAQ Section. If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using your TP-Link ID. 12 Chapter 14 Work with Alexa and IFTTT This chapter will show you how to configure your router to work with Alexa and IFTTT. Chapter 14 Work with Alexa and IFTTT Control your network devices using simply the power of your voice with the TP-Link Router Skill for Amazon. Prioritize the Internet connection of your laptop, switch off your routers LED or ask Alexa to read out the password of the guest network, all without stopping what youre doing. With IFTTT, you can trigger actions when devices are connecting, disconnecting, or being added to your network. You can even choose to prioritize certain devices every time you use them. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Smart Life Assistant. 3. Follow the on-screen instructions on the Alexa or IFTTT section to set up smart control of your router. Or download TP-Link Tether app, open it and tap the icon, then select Smart Life Assistants to complete the setup. 14 COPYRIGHT & TRADEMARKS is a registered Specifications are subject to change without notice. trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-

Link Technologies Co., Ltd. All rights reserved. 15 FCC compliance information statement Model I.T.E. Power AMS159A-1201000FU Product Name: AX1500 Wi-Fi 6 Router Model Number: Archer AX10 Component Name Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 16 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.06.06 FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: AMS159A-1201000FU Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

17 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.06.06 18 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.5 MHz(20dBm) 5150 MHz -5250 MHz(23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/

EC and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. National restrictions Attention: This device may only be used indoors in all EU member states and EFTA countries. AT BE BG CH CY CZ DE DK EE EL ES FR HR HU IE FI IS LT LU LV MT NL LI NO PL PT RO SE SI SK UK IT Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

19 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement Caution:

The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Avertissement:

Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

20 Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice & BSMI Notice:

4.7.9.1 4.7.9.2 21 PBB PBDE PCB 1. 0.1 wt % 0.01 wt %

2. 3. -

Pb Cd CrVI Hg

,

. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. 22 Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanations of the symbols on the product label Symbol Explanation DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 23

2.4G Ant. 1 5G Ant. 2 5G Ant. 1 2.4G Ant. 2 Project No.: 1905C079 Page 5 of 10 Project No.: 1905C079 Page 6 of 10 Project No.: 1905C079 Page 7 of 10 Project No.: 1905C079 Page 8 of 10 Project No.: 1905C079 Page 9 of 10 Project No.: 1905C079 Page 10 of 10

Project No.: 1905C079 Page 2 of 10 Project No.: 1905C079 Page 3 of 10 Project No.: 1905C079 Page 4 of 10

A B C D E 1

2 3 4 5 6 7 8 9 Model: Archer AX10 AX1500 Wi-Fi Router Power: 12V 1A Default Access:

Model: Archer AX10(US) Ver:1.0 S/N:XXXXXXXXXXXXX MADE IN CHINA MAC:XX-XX-XX-XX-XX-XX Power: 12V 1A Default Access:

MADE IN CHINA Model: Archer AX10 AX1500 Wi-Fi Router TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC FCC ID: TE7AX10 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G IC: 8853A-AX10 TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC FCC ID: TE7AX10 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 8853A-AX10 70.5*39mm, R3.5, C2, 0.2mm

1S /N 35*7m m 7210500061 M A C /P IN /S S ID M A C X X X X X X X X X X X X X X -X X -X X -X X -X X -X X 2S S ID 3 3mm 3mm 3mm 3mm 3mm 1 2 3 4 5 6

A rcher A X 10(U S )_1.0_

A 1

80g+

-260

A rcher A X 10(U S )_1.0

2019-05-09 7 Pantone 877C

8 9 A B C D E

FCC RF EXPOSURE REPORT FCC ID: TE7AX10 Project No. Equipment Model Name Series Model Applicant Address According

: 1905C079

: AX1500 Wi-Fi 6 Router

: Archer AX10, Archer AX1500

: N/A

: TP-Link Technologies Co., Ltd.

: Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China

: FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 B T L I N C . No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Guangdong, China. Report No.: BTL-FCCP-3-1905C079 Page 1 of 5 Report Version: R00

: AX1500 Wi-Fi 6 Router

: Archer AX10, Archer AX1500

: Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology 1. GENERAL SUMMARY Equipment Brand Name : tp-link Test Model Series Model : N/A

: TP-Link Technologies Co., Ltd. Applicant Manufacturer : TP-Link Technologies Co., Ltd. Address Date of Test : May 23, 2019 ~ Jul. 10, 2019 Test Sample : Engineering Sample No.: DG19061085 Standards The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1905C079) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s).

: FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C Park, Shennan Rd, Nanshan, Shenzhen, China Report No.: BTL-FCCP-3-1905C079 Page 2 of 5 Report Version: R00 2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance:

where:

S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Report No.: BTL-FCCP-3-1905C079 Page 3 of 5 Report Version: R00 Table for Filed Antenna:

For 2.4GHz:

Ant. 1 2 Note: This EUT supports CDD, and all antennas have the same gain, 3101502558 3101502557 Dipole Dipole Antenna Type Brand P/N Connector Weld Weld Gain (dBi) 3.82 3.82 Directional gain = GANT+Array Gain, where Array Gain is as follows:

For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =3.82+10log(2/1)dBi=6.83. Then, the power density limit is 8-(6.83-6) = 7.17. For power measurements, Array Gain = 0 dB (NANT 4), so the Directional gain=3.82. For 5GHz:

Antenna Specification:

Ant. Brand 1 2 1 2 P/N 3101502560 3101502559 3101502560 3101502559 Antenna Type Connector Gain

(dBi) 4.37 I-PEX N/A I-PEX I-PEX I-PEX N/A N/A N/A 4.37 5.80 5.80 Note UNII-1 UNII-1 UNII-3 UNII-3 Note: 1. This EUT supports CDD, and all antennas have the same gain, Directional gain = GANT+Array Gain, where Array Gain is as follows:

For UNII-1 Non-Beamforming function, For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =4.37+10log(2/1)dBi

=7.38. Then, the power spectral density limit is 17-7.38+6=15.62. For power measurements, Array Gain = 0 dB (NANT 4), so the Directional gain=4.37. For UNII-3 Non-Beamforming function, For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =5.80+10log(2/1)dBi

=8.81. Then, the power spectral density limit is 30-8.81+6=27.19. For power measurements, Array Gain = 0 dB (NANT 4), so the Directional gain=5.80. 2. For UNII-1 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 4.37+3.00=7.37. Then, output power limit is 30-7.37+6=28.63, the power density limit is 17-7.37+6=15.63. For UNII-3 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 5.80+3.00=8.80. Then, output power limit is 30-8.80+6=27.20, the power density limit is 30-8.80+6=27.20 Report No.: BTL-FCCP-3-1905C079 Page 4 of 5 Report Version: R00 3. TEST RESULTS Tune up tolerance(dBm) 2.4GHz 0.5 5GHz 0.5 For 2.4GHz:

Directional Gain

(dBi) 3.82 Directional Gain

(numeric) 2.4099 Max. Output Power

(dBm) 23.4 Max. Output Power

(mW) 218.7762 Power Density (S)

(mW/cm2) 0.10494 Limit of Power Density (S)

(mW/cm2) Test Result 1 Complies For 5GHz Non-Beamforming (UNII-1):

Directional Gain

(dBi) 4.37 Directional Gain

(numeric) 2.7353 Max. Output Power

(dBm) 26.52 Max. Output Power

(mW) 448.7454 Power Density (S)

(mW/cm2) 0.24432 Limit of Power Density (S)

(mW/cm2) Test Result 1 Complies For 5GHz Non-Beamforming (UNII-3):

Directional Gain

(dBi) 5.80 Directional Gain

(numeric) 3.8019 Max. Output Power

(dBm) 26.78 Max. Output Power

(mW) 476.4310 Power Density (S)

(mW/cm2) 0.36054 Limit of Power Density (S)

(mW/cm2) Test Result 1 Complies For 5GHz With Beamforming (UNII-1):

Directional Gain

(dBi) 7.37 Directional Gain

(numeric) 5.4576 Max. Output Power

(dBm) 26.56 Max. Output Power

(mW) 452.8976 Power Density (S)

(mW/cm2) 0.49198 Limit of Power Density (S)

(mW/cm2) Test Result 1 Complies For 5GHz With Beamforming (UNII-3):

Directional Gain

(dBi) 8.80 Directional Gain

(numeric) 7.5858 Max. Output Power

(dBm) 26.46 Max. Output Power

(mW) 442.5884 Power Density (S)

(mW/cm2) 0.66827 Limit of Power Density (S)

(mW/cm2) Test Result 1 Complies For the max simultaneous transmission MPE:

Power Density (S) Power Density (S)

(mW/cm2) 2.4GHz 0.10494

(mW/cm2) 5GHz 0.66827 Total Limit of Power Density (S)

(mW/cm2) Test Result 0.77321 1 Complies Note: The calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1905C079 Page 5 of 5 Report Version: R00

TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2019-07-22 We, the undersigned company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Declare that:

Product description: AX1500 Wi-Fi 6 Router Type designation: Archer AX10, Archer AX1500 Brand: tp-link FCC ID: TE7AX10 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com

Model Declaration Letter We, the undersigning company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China Hereby confirm that the following products:

Product description:AX1500 Wi-Fi 6 Router Type designation: Archer AX10, Archer AX1500 Trademark: tp-link That All versions of the Model Archer AX10 and Archer AX1500 are electrically equal except the following difference:

1. The Model Archer AX10 and Archer AX1500 are only differ in model name. Date: 2019-07-24 Name: Jing Huang Telephone: 75521534921 E-mail: certification@tp-link.com Signature:

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: _2019-07-22______ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____BTL Inc/Mandy Wang______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____2020-07-22____

(Signature1) ___________ By:

Title:

On behalf of: TP-Link Technologies Co., Ltd. Regulatory Compliance Manager __ _______Jing Huang_________________

(Print name)

(Company Name) Telephone:

_75521534921_ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2019-07-22 Subject: Confidentiality Request for: ______ TE7AX10____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual _____ TP-Link Technologies Co., Ltd.______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Regulatory Compliance Manager

(Signature/Title2) _______Jing Huang_________________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate TP-Link Technologies Co., Ltd. authorized agent letter has been provided. Letters should be placed on appropriate letterhead.