TP-LINK Groovi Ripple Portable Bluetooth Speaker BS1001 User Manual Caution: 1) Photos are for reference only, actual product may vary! 2) TP-LINK is committed to improving product quality and performance, but product technology and design are subject to change without prior notice . CONTENTS IN THE BOX:
1. BS1001:
2.USB charging cable TP-LINK Groovi Ripple Portable Bluetooth Speaker BS1001 User Manual Caution: 1) Photos are for reference only, actual product may vary! 2) TP-LINK is committed to improving product quality and performance, but product technology and design are subject to change without prior notice . 3. Manual 4. Guarantee card Important safety instructions:
1. Please carefully read and follow the safety instructions before using the product. 2. Please avoid leaving the product in a damp environment, exposing it to sunlight, or placing it near re. 3. Please do not use the product near water. 4. Please do not place the product near heat-generating appliances such as a radiator, air conditioner, or stove. 5. Please use the recommended power voltage. 6. Please do not disassemble the product without authorization. 7. Explosion may occur if battery is replaced incorrectly. Please replace battery only with the same or equivalent type. 8. Please avoid leaving the product exposed to sunlight, rain, water droplets, or a hot or moist environment. 9. Please enjoy the music at an appropriate volume to protect your health and sound equipment. 10. Please unplug the charging cable when it is not in use. PRODUCT DESCRIPTION:
1 2 3 4 5 6 Indicate led Power button Vol+ button Vol- button Micro USB charging port 3.5 mm audio input interface 3.5mm 2 1 5 6 4 3 TECHNICAL DATA:
Output power: 3.5W Distortion: 1%
Frequency response: 120Hz~20KHz SNR: >65dB Speaker unit: 4 Power input: USB/DC 5V Sensitivity: 600mV Product size: 88 x 88 x 41mm Recharging Battery:
1. This product has a built-in rechargeable lithium battery. Please connect the USB charging cable to a workable USB port (a PC/Mac or a USB power adapter). 2. When the battery is low, the red power indicator will turn on. 3. When the speaker is being recharged, the red power indicator truns on. When the recharging is completed, the indicator will turn off. 4. When the battery is completely discharged, the product cannot be turned on before being recharged for a while. The Speaker Paired with a Bluetooth Device (First Connection):
1. Make sure that the product has sucient power or has been connected to power. 2. Short Press the power button. 3. The blue power indicator turns on and the Bluetooth pairing blue indicator ashes. 4. Start the Bluetooth device (for example, a mobile phone) to searching mode (just as you would when searching for a new Bluetooth device on the phone) 5. Groovi Ripple is displayed in the list of Bluetooth devices. 6. Select Groovi Ripple. Enter 0000 if prompted to enter a pairing code. 7. The blue LED stops blinking and stays blue. This indicates a successful pairing. 8. Check the Bluetooth device to make sure that the connection is successful. 9. Press the power button to turn off the product. The product will shut down automatically after 30 minutes if no audio input is received. ATTENTION:
To connect the product to another Bluetooth device, you must rst disconnect the current Bluetooth connection. Long Press Power button to enter a new device searching and pairing mode. When the product is restarted, it will automatically reconnect to the previously paired device by default. If the automatic connection fails, you need to do the connection manually. AUX IN Mode Operation Instructions:
1. Insert one end of a 3.5 mm stereo audio cable into the Aux in interface on the back of this product. 2. Put the other end of the stereo audio cable into the headphone jack of an external audio device.