User Guide Indoor/Outdoor Security Camera System 1910012511 REV1.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Camera 5 View Your Camera 7 Configure Your Camera 8 Check Activity Notifications 9 Work with Other Smart Home Products 10 Authentication 11 About This Guide This guide provides a brief introduction to the Indoor/Outdoor Security Camera System and the Kasa app, as well as regulatory information. Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide, the following convention is used:
Convention Description Camera Hub Teal Stands for Kasa Smart Wire-Free Camera. Stands for Kasa Smart Camera Hub. Key information appears in teal, including management page text such as menus, items, buttons and so on. Hyperlinks are in teal and underlined. You can click to redirect to a website. Underline More Info Specifications can be found on the product page at https://www.tp-link.com. Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support. 1 Introduction An Indoor/Outdoor Security Camera System generally includes one Kasa Smart Camera Hub and one or more Kasa Smart Wire-Free Cameras. The Kasa Smart Wire-Free Camera monitors anywhere and everywhere. Monitor live video and recordings directly on the Kasa Smart app from the convenience of your smartphone. The Kasa Smart Camera Hub adds a layer of security with a siren, alert and audio recordings to mimic occupancy. Your home is always protected. Free 2-day Cloud Storage Access up to 2-days of crystal clear 1080p streaming video at no charge. Wired or Wire-free A camera that gives you freedom to take it anywhere you want. When connected to our adapter, the Kasa Smart camera allows for a pre-roll which begins recording a few seconds before every clip. Crystal Clear 1080p Video Sharp and clear 1080p video makes sure you never miss a thing. In the dark, the camera will detect activity up to 25 feet away with Night Vision. Rechargeable Lithium Ion Battery*
With a low-power Wi-Fi protocol, weve extended the battery life for a longer and smarter experience.
*Optional: Adapter for wired use if needed. Built-in Siren and 2-way Talk Use crisp 2-way audio to communicate with the delivery person at your front door or use the cameras siren to scare away intruders. More Than A Hub Weatherproof The hub helps save power and also plays as a secondary security alarm. Any intruder will be met with an unwelcome sound. The Kasa Smart Wire-Free Cameras IP65 rating ensures your device will be protected against rain and dust. 2 Kasa Smart Wire-Free Camera has a system LED that changes color according to its status, speakers and microphone, and a Sync button. See the explanation below:
System LED Appearance Alternating amber and green:
Powering on or starting up Flashing green:
Connecting to hub (Discovery mode) Solid green:
Connected to hub Quick flashing red:
Failed to connect to or sync with hub Flashing red once per minute:
Low battery (below 15%) Quick flashing amber:
Firmware updating Flashing amber once per second:
Factory resetting Solid amber:
No connection, initializing, or rebooting Solid blue:
Battery starts charging Off:
No power or Status LED off Sync button Press for 1 second duringDiscovery mode:
Initiates the syncing process with hub Press and hold for about 15 seconds when siren is not playing:
Factory resets the camera Speaker and Microphone Built-in internal speaker and microphone are protected by the waterproof membrane. Warning: Do NOT insert objects into the holes!
3 Kasa Smart Camera Hub has a LED ring that changes color according to its status, a Siren Off button, and a Reset button. See the explanation below:
System LED Alternating amber and green:
Connected to home router but no internet connection Alternating red and green:
Not connected to home router and internet Quick flashing green:
Camera attempting to sync with hub (Discovery mode) Flashing green once per second:
Connected to home router and internet Solid green:
Camera connected to hub Solid red:
Camera too far from hub Flashing red:
Siren or speaker is on Quick flashing amber:
Firmware updating Flashing amber once per second:
Factory resetting Solid amber:
Powering on or starting up Off:
Communicating with camera and internet, no camera connected, or no power Siren Off button Press for 1 second when siren is on:
Turns off the siren Reset button Press and hold for about 15 seconds when neither siren nor alert is playing:
Factory resets the hub 4 Set Up Your Camera Follow the steps below to get started with your new camera. Step 1. Download Kasa Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Add Camera Tap the button in the Kasa app, select Add a Device, then select Kasa Cam Wire-
Free. Follow app instructions to add hub and cameras. 5 Step 4. Mount Camera Follow mounting instructions in the app for ideal camera placement. Enjoy!
Your camera is ready for use in your device list. 6 View Your Camera After initial setup is complete, you can view your camera from anywhere. View Smart Devices List Go to the Devices page, then you can view the list of all your cameras and any other smart devices if any. View Cameras List Go to the Cameras page, then you can view the list of all your cameras. View Live Video Tap a camera on the Devices or Cameras page, then you can view the live video, talk to a person near the camera, sound the siren to scare away intruders, and more. 7 Configure Your Camera On the live video page, you can configure your camera to meet various needs. Set Schedule Tap on the live video page, then you can schedule an automatic On/Off event for your camera to simplify your daily routine. Change Camera Settings Tap view and change camera settings. on the live video page, then you can 8 Check Activity Notifications When you receive an activity notification, you can check the live video immediately, or check the recordings at any time. Check Activity History Go to the Activity page, then you can view the activity clips that your camera records. Filter Activity Clips Tap activity clips according to your needs. on the Activity page, then you can filter Change Notification Settings Tap and change notification settings. on the Activity page, then you can view 9 Work with Other Smart Home Products You can control your camera together with other smart home products from TP-Link, Amazon Alexa, Google Assistant, and more. Add Other Smart Devices Tap the button on the Devices page, and add more TP-Link devices or other devices that work with Kasa. Set Scenes Go to the Scenes page, then you can preset how your smart devices should act at special occasions. 10 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved. and Kasa Smart are registered trademarks of TP-Link Technologies Co., Ltd. Other 11 FCC compliance information statement Product Name: Kasa Smart Wire-Free Cameraera System Model FCC Identifier number KA300B KH300 ASM159A-1201000FU Model Number: KC300 KC300 Accessories: AC Power Adapter for Camera, Lithium Battery, Kasa Smart Camera Hub KH300 and its AC Power Adapter Component Name AC Power Adapter for Camera DSA-5PFU1-05 FCA 050100 NA NA Lithium Battery Kasa Smart Camera Hub TE7KH300 AC Power Adapter for Hub NA Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 12 Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. FCC compliance information statement Product Name: Kasa Smart Camera Hub Model Number: KH300 Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com Issue Date: 2019-01-21 13 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-01-21 14 FCC compliance information statement Product Name: AC Power Adapter for Camera / Lithium Battery / AC Power Adapter for Hub Model Number: DSA-5PFU1-05 FCA 050100 / KA300B / ASM159A-1201000FU Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-01-21 15 Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-
exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:
. NCC Notice & BSMI Notice:
16 PCB Pb Cd Hg CrVI PBB PBDE 1. " 0.1 wt %" " 0.01 wt %"
2. " "
3. ""
Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. 17 Adapter shall be installed near the equipment and shall be easily accessible. Do not disassemble, crush, puncture, short external contacts, or dispose of the battery in fire or water. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Warnings Operating Temperature:
KC300: -20 C-45 C (-4F-113F) KH300: 0 C-40 C (32F-104F) Operating Humidity:
KC300: 10%-65%RH, Non-condensing KH300: 10%-90%RH, Non-condensing Explanation of the symbols on the product label Symbol DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Explanation 18