submitted | available | document details (if available) | source link |
---|---|---|---|
April 08 2019 | May 08 2019 | Adobe PDF Library 15.0 |
various | 14. Users Manual | Users Manual | 1.32 MiB | April 08 2019 / May 08 2019 |
Pan/Tilt Home Security Wi-Fi Camera User Guide Tapo C200 1910012633 REV1.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Camera 4 Use Your Camera 6 Authentication 9 About This Guide This guide provides a brief introduction to the Pan/Tilt Home Security Wi-Fi Camera and the Tapo Camera app, as well as regulatory information. Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide, the following convention is used:
Convention Description Blue Underline Key information appears in teal, including management page text such as menus, items, buttons and so on. Hyperlinks are in teal and underlined. You can click to redirect to a website. More Info Specifications can be found on the product page at https://www.tapo.com. Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. 1 Introduction When you are away from home, there are always people and things you will worry about. With the Pan/Tilt Home Security Wi-Fi Camera connected to your home network, you can get the full picture of any space in your apartment, dorm or home. Let the camera help you stay with them anytime, anywhere. Receive a notification if your little boy is working on the kitchen to make his lunch, or your fur baby is messing around inside kitchen. Smooth Pan and Tilt 360 horizontal range and 114 vertical range. High Definition Video Capture every detail in crystal-clear 1080p definition. Advanced Night View Even at night, the camera can provide a visual distance of up to 30 ft. Live View Always stay with that matters most to you from anywhere, anytime. Two-Way Audio Communicate with others with the built-in microphone and speaker. Sound and Light Alarm Trigger light and sound effects to frighten away unwanted visitors. Privacy Mode - Turn on the privacy mode to shut down the surveillance. Sharing - Forward the videos you want to share through social networking platforms. Safe Storage Support Micro SD Card* ( up to 128 GB).
* The SD card is not provided. 2 Appearance The Pan/Tilt Home Security Wi-Fi Camera has a system LED that changes color according to its status, a lens, microphone, speaker, DC power port, RESET button and a Micro SD card slot. Refer below for details. Micro SD RESET Lens System LED Solid red:
Starting up Blinking red and green:
Ready for setup Blinking green slowly:
Connecting to Wi-Fi Solid green:
Connected to Wi-Fi Blinking red:
Camera resetting Blinking green quickly:
Camera updating Microphone Built-in internal microphone. Note: Do NOT insert objects into the hole. Speaker The sound comes out of the camera. DC Power Port Connect the power cord provided. Tilt your camera lens up to find the RESET button and Micro SD card slot. RESET Button Press and hold for at least 5 seconds until the LED blinks red to reset your camera. Micro SD Card Slot Insert a Micro SD card for local recording. 3 Set Up Your Camera Follow the steps below to get started with your new camera. Step 1. Download App Get the Tapo Camera app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Start Setup Tap the button in the app and select C200. OR 4 Step 4. Configure Camera Follow app instructions to configure your camera and add it to your home network. Step 5. Place Camera Place your camera on a flat surface, or install it on a wall or ceiling with the provided mounting template and mounting screws. 1. Mark Position Place the mounting template where you want the camera. For wall mounting, drill two holes through two circles. 2. Mount Base Affix the camera base using the screws. For wall mounting, insert two anchors into the holes and use the screws to affix the camera base over the anchors. 3. Secure Camera Attach the camera on the base and rotate to secure the camera. 5 Use Your Camera After you successfully set up the camera, you will see your camera listed on the home page. You can view and manage your camera from anywhere at any time with the Tapo Camera app. Home Page This page lists all your cameras you've added and you can view them directly and manage them easily. Camera Page Tap Talk or Voice Call to communicate with others, use Pan & Tilt to rotate your camera to monitor every angle of your room, enable Detection and Alerts when motion detected, turn on the Privacy Mode to shut down the surveillance, or go to Playback to check recordings. 6 Change Camera Settings Change the settings of your camera to meet various needs, such as change your camera name, customize recording and detection schedules, turn on or off notifications, set activity zones, etc. Detection Settings View your camera detection settings and customize preferences for individual cameras. You can also tap to activate the Home or Away Mode with preset settings for when you're home or away. 7 Memory Photos and videos you take yourself will appear here. About Me You can edit your account, find the basic info related to the Tapo Camera app, or check the frequently asked questions and answers. 8 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Tapo is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved. 9 FCC compliance information statement FCC Identifier number NA Product Name: Pan/Tilt Home Security Wi-Fi Camera Model Number: Tapo C200 Component Name Model AC ADAPTER DC-005 Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 10 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-07-27 11 FCC compliance information statement Product Name: AC ADAPTER Model Number: DC-005 Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-07-27 12 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-
exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement 13 Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:
. NCC Notice & BSMI Notice:
14 Pb Hg CrVI 1. "0.1 wt %" "0.01 wt %"
2. ""
3. ""
Cd PCB PBB PBDE
,
. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. 15 Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Explanation Symbol DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 16
This product uses the FCC Data API but is not endorsed or certified by the FCC