RE270K AC750 Wi-Fi Range Extender with Smart Plug Users Manual

 

Users Manual RE270K / RE370K AC750 / AC1200 Wi-Fi Range Extender with Smart Plug 1910011951 REV 1.0.0 Copyright & Trademarks Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. App Store is a trademark of Apple Inc. Google Play is a trademark of Google Inc. 2016 TP-Link. All rights reserved. www.tp-link.com Contents 4 5 6 7 10 4 4 4 7 8 Introduction Product Overview Features Product Requirements Wi-Fi Extender+

Important Safety Information Connect Wi-Fi Extender+ to the Internet Setting Up Wi-Fi Extender+ via Kasa Setting Up Wi-Fi Extender+ via Computer Using Kasa with Wi-Fi Extender+

10 Kasa Account 10 Kasa Settings 11 Customizing Wi-Fi Extender+

12 Location Assistant 12 Extending Another Wi-Fi Network 13 Managing Network Access Home Automation with Integrated Smart Plug 15 Scheduling 16 Timer 17 Runtime Report 18 Creating Scenes Configuring Wi-Fi Extender+ via a Web Browser 15 19 19 Changing Admin Account 20 Dashboard 21 Extending Another Wi-Fi Network 23 Extended Network Settings 24 Wi-Fi Access Control 26 Changing the IP address 27 DHCP Server 28 Wireless Adapter 29 Other Administrative Tools 29 Time Settings 29 LED Control 30 System Log 31 Cloud Setting 32 Maintaining the Wi-Fi Extender+

32 Firmware Upgrade 33 Backup and Restore 35 Resetting 37 Troubleshooting 37 Frequently Asked Questions 38 Usage Tips 39 Support 40 Specifications 41 Limited Warranty Introduction Product Overview TP-Link AC750/AC1200 Wi-Fi Range Extender with Smart Plug, also called Wi-Fi Extender+ is a compact home device that expands and boots the Wi-Fi signal of your existing router to those hard-to-reach areas throughout your home or office up to 10,000 square feet. Powered by the latest wireless AC technology, the Wi-Fi Extender+ delivers ultra-fast Wi-Fi speed up to 1750Mbps, providing reliable connections for bandwidth-intensive needs such as HD/4K video streaming and online gaming. The Wi-Fi Extender+ is also integrated with an intelligent Wi-Fi socket, also known as a Smart Plug, that gives you the ability to customize, automate, and remotely control the plugged-in devices, such as lights and other household electronics, via TP-Links Kasa mobile app on your iOS or Android devices, no matter where you find yourself. Features Complies with IEEE 802.11ac Provide multiple encryption security types, including 64-bit, 128-bit, 152-bit WEP, and WPA-PSK/

WPA2-PSK Support built-in DHCP server Support app-based and web-based managements. Control the Smart Plug whenever you are connected to the Internet using the Kasa app on your smartphones and tablets. Automate your lights and small household appliances with Schedule and Timer. Provide historical power consumption report of the plugged-in devices in real-time. Discourage potential intruders with Away Mode that automatically turns the plugged-in devices on and off at different times. Compatible with Amazon Echo (sold separately) that lets you interact with the devices plugged into the Smart Plug using your voice. Product Requirements A smartphone or tablet running iOS 8 or higher; Android 4.1x or higher. A Wi-Fi connection (supports 802.11n standard). 5 www.tp-link.comUsers ManualWi-Fi Extender+Wi-Fi Extender+

1 2 3 4 5 6 7 Note: Image may differ from actual product due to different regional power specifications. We use the U.S. version as an example 1 Antenna Position the antenna vertically for optimal performance. 2 LED Indicators 2.4G 5G Status Green: The 2.4GHz network is extended. Flashing green: The extender is in SoftAP mode. OFF: No 2.4GHz connection. Green: The 5GHz network is extended. Flashing green: The extender is in SoftAP mode. OFF: No 5GHz connection. Green: The extender is connected and in a good signal location. Red: The extender is connected, but in a poor signal location. Flashing green rapidly: SoftAP connection is in progress. Flashing amber and green: When pressing the Reset button for 5~10 seconds to trigger a Soft Reset. Flashing amber rapidly: When pressing the Reset button for 10 seconds to factory reset the device. OFF: No active connection. 6 www.tp-link.comUsers ManualWi-Fi Extender+Power Green: The extender is plugged into an active power outlet. Flashing green: Initializing. Flashing green rapidly: Upgrading firmware. 3 LED ON/OFF Button Press to turn the LED Indicators ON or OFF. 4 Reset Button Press and hold for about 5 seconds or until the Status LED starts to flash amber and green alternately to only reset the network settings without losing the current settings and initiate the SoftAP mode. Press and hold for about 10 seconds or until the Status LED starts to flash amber rapidly to reset the extender to factory defaults. 5 Socket ON/OFF Button Press to turn the Smart Plug and its LED indicator ON or OFF. 6 Smart Plug Plug in your electronic devices and small appliances with the input range from 100V to 240V, and control them from the Kasa app Note: The input voltage should be consistent with the output voltage of the power outlet. 7 Gigabit Ethernet Port Connect Ethernet-only (wired) devices such as Smart TVs, game consoles, and Blu-ray players to your wireless network with Ethernet cables. 7 www.tp-link.comUsers ManualWi-Fi Extender+Important Safety Information Before installing and using the Wi-Fi Range Extender with Smart Plug, read and follow all safety precautions including the following:

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Do NOT exceed the recommended electrical ratings

(100V240V~15A, 50/60Hz) of the pass-through power outlet. For indoor use only. The Wi-Fi Extender+ must only be installed and operated in an upright vertical position with the antenna pointing upwards. Do NOT leave the Wi-Fi Extender+ in an excessive hot or humid environment. The Wi-Fi Extender+ is not intended for use in locations where the temperature may be less than actual room conditions, such as unheated basements or garages. Do NOT touch the integrated pass-through power outlet with wet hands or when standing on wet or damp surfaces. 8 www.tp-link.comUsers ManualWi-Fi Extender+Connect Wi-Fi Extender+ to the Internet There are two easy-to-setup methods to extend your Wi-Fi network. Setting Up Wi-Fi Extender+ via Kasa 1 Download TP-Link Kasa from the App Store or Google Play. OR Scan QR code Kasa 2 Connect your mobile device to your Wi-Fi network. 3 Launch Kasa and follow the in-app instructions to expand your Wi-Fi network. Sketch 9:41 AM 100%

Sketch 9:41 AM 100%

Sketch 9:41 AM 100%

Power up Pull up the antenna on your Wi-Fi Extender+. Then, plug in your extender to power it up. Press and hold the Reset button for 5 seconds until the Status light is blinking green and amber. Great!

2.4G 5G Status Reset NEXT Your extended dual-band networks are MyHome_1_EXT MyHome_2_EXT The network passwords have been inherited from your home networks. DONE NEXT 4 Connect your Wi-Fi devices to the new extended network using the same password as the main network. The extended network names are your main network names (SSIDs) with _EXT or _2GEXT or _5GEXT as a suffix, depending on whether the extender is connecting to the single-band or dual-band router. For example:

Main Router Main Routers SSIDs Extended SSIDs 2.4GHz Single-Band MyHome 2.4GHz: MyHome_EXT 5GHz: MyHome_5GEXT 9 www.tp-link.comUsers ManualWi-Fi Extender+5GHz Single-Band Dual-Band MyHome MyHome_1 MyHome_2 2.4GHz: MyHome_2GEXT 5GHz: MyHome_EXT 2.4GHz: MyHome_1_EXT 5GHz: MyHome_2_EXT Setting Up Wi-Fi Extender+ via Computer 1 Position antenna vertically and plug in the extender near your router. Then, wait until the Power LED is lit solid green. 2.4G 5G Status

! The Wi-Fi Extender+ must only be installed and operated in an upright vertical position with the antenna pointing upwards. 2 Disconnect the Ethernet connection from your computer (if any). Click the Wi-Fi icon on the taskbar and select the extenders default network name (SSID): TP-LINK_2G_EXT or TP-LINK_5G_EXT. No password is needed to connect. Mac OS X Wi-Fi: On Turn Wi-Fi Off TP-LINK_2G_EXT TP-LINK_5G_EXT Join Other Network... Open Network Preferences... Windows Networks Airplane mode Off Wi-Fi TP-LINK_2G_EXT Connect automatically Connect 3 Launch a web browser and enter http://tplinkrepeater.net into the address field. Then, enter admin

(all lowercase) for both username and password to log in. 10 www.tp-link.comUsers ManualWi-Fi Extender+

4 5 6 http://tplinkrepeater.net admin admin LOGIN Follow the Quick Setup wizard to extend your 2.4GHz and 5GHz Wi-Fi networks. Quick Setup Connect to routers 5GHz Wi-Fi Summary Connect to routers 2.4GHz Wi-Fi Setup Extended Wi-Fi 2.4GHZ NETWORK MAC ADDRESS MyHome 00:AA:BB:11:CC:22 SECURITY WPA2 2.4GHz Wi-Fi Password:

NEXT Relocate your Wi-Fi Extender+ to an outlet around the midpoint between your Wi-Fi router and the Wi-Fi dead zone. Alternatively, use the Status LED on the extender or the Location Assistant feature on the Kasa app to find the optimal placement for your Wi-Fi Extender+.

!

It is important that you wait until the Wi-Fi Extender+ is fully powered up, and all LED Indicators stop blinking. Keep in mind that other types of radio frequencies can interfere with the Wi-Fi signal between your router and Wi-Fi Extender+. Avoid placing the extender near Bluetooth devices, cordless phones, microwave ovens, baby monitors, and motor-driven appliances. Connect your Wi-Fi devices to the new extended network using the same password as the main network. Unless you customized the extended network names during the configuration, the extended network names are your main network names (SSIDs) with _EXT or _2GEXT or _5GEXT as a suffix, depending on whether the extender is connecting to the single-band or dual-band router. For example:

Main Router Main Routers SSIDs Extended SSIDs 2.4GHz Single-Band MyHome 2.4GHz: MyHome_EXT 5GHz: MyHome_5GEXT 11 www.tp-link.comUsers ManualWi-Fi Extender+5GHz Single-Band Dual-Band MyHome MyHome_1 MyHome_2 2.4GHz: MyHome_2GEXT 5GHz: MyHome_EXT 2.4GHz: MyHome_1_EXT 5GHz: MyHome_2_EXT 12 www.tp-link.comUsers ManualWi-Fi Extender+Using Kasa with Wi-Fi Extender+

Once the Wi-Fi Extender+ is conneted to your Wi-Fi network, you can use the Kasa app on your mobile devices or tablets to control, automate the Smart Plug and manage the extended network easily and seemlessly. Please make sure that your mobile device or tablet is connected to the extended network before any configuration. If you want to control and manage the Wi-Fi Extender+ from outside of your home or office via an Internet connection, please enable the Remote Control within the Kasa app settings. Kasa Account While you dont have to have a Kasa account to use your devices, signing up for an account provides added functionality such as:

Synchronization of settings and configurations to all your mobile devices. Ability to control and configure the devices from outside your home. Ability to customize your TP-Link Smart Home devices with Scenes for a truly automated experience. Use of third-party services and products such as Amazon Echo. Devices can only be associated with one Kasa account. To remove the association, turn off Remote Control in the Kasas settings, or factory reset the device. After creating your Kasa account, you will need to verify the email associated with your account by clicking a link in an email that Kasa sends you. Until you verify the email, much of the above functionality will not work. Kasa Settings Kasas Settings allows you to set your global preferences such as:

Location and Time to set the location and time of where the Smart Home devices are located so that the Away Mode and Schedules can run on time. You can set your devices location using your smartphones GPS function, or manually enter the latitude and longitude coordinates. Firmware Update to update your Smart Home devices when there is an update available. Refer to Firmware Update for instructions. 13 www.tp-link.comUsers ManualWi-Fi Extender+Customizing Wi-Fi Extender+

You can personalize your Wi-Fi Extender+ with a descriptive name and a custom icon that represents the connected device or household appliance from the extenders details screen. 9:41 PM 100%

Device Settings DEVICE CONTROLS LED Light Device Name My Range Extender Device Icon NETWORK Network Admin Password Use Location Assistant DEVICE INFO Model RE270 MAC Address 00:01:02:03:04:05 Hardware Version Firmware Version 1.0.0 1.0.0 Delete Device 1. On the Devices screen, tap on the row of the Wi-Fi Extender+ to go to its controls. 2. Tap the

(Settings) icon at the top-right corner. 3. On the Device Settings screen, you can personalize the following settings:

Remote Control Tap the toggle to turn ON the Remote Control feature that allows you to control the Wi-Fi Extender+ outside of your home. You will be prompted to sign in to your Kasa account first. This feature is set to OFF by default. LED Light Tap the toggle to turn ON or OFF all LED Indicators. Device Name Enter a unique name for your Wi-Fi Extender+. Device Icon Choose one of the available icons or from your devices albums or camera. Network Admin Password Set a unique password (up to 15 characters) to protect your Wi-Fi Extender+ and its settings from unauthorized access. The default Admin Password is admin. Use Location Assistant Use this feature to find a location within your home or office that maximizes the performance of the Wi-Fi Extender+. It is important to make sure that you wait until the Wi-Fi Extender+ is fully powered up (for instance, by waiting for the Power and Status LEDs to stop blinking) before tapping Check Again. 14 www.tp-link.comUsers ManualWi-Fi Extender+Location Assistant After setup, the Status LED on the left side of the Wi-Fi Extender+ and the Kasa app will detect whether the devices signal strength is too strong or too weak. You can use either the Status LED or Location Assistant to help you reposition the extender to an optimal location (if needed). Please note that any time you relocate the Wi-Fi Extender+, make sure that you wait until the device is fully powered up and all LED Indicators stop blinking after plugging the extender into a wall outlet. If the Status LED is green, your Wi-Fi Extender+ is placed in an optimal location. The Location Assistant can also be accessed anytime from the Device Settings page. 9:41 PM 100%

9:41 PM 100%

9:41 PM 100%

Location Assistant Location Assistant Location Assistant TOO CLOSE TOO CLOSE TOO CLOSE JUST RIGHT JUST RIGHT JUST RIGHT TOO FAR TOO FAR TOO FAR

!

Signal too strong

!

Signal too weak Try plugging it into an outlet a bit farther. Wait for all of the LED lights to stop blinking, then tap Check Signal. Try plugging it into an outlet a bit closer. Wait for all of the LED lights to stop blinking, then tap Check Signal. Signal is good!

Your Range Extender is at a good location. C H E C K S I G N A L C H E C K S I G N A L C H E C K S I G N A L Extending Another Wi-Fi Network If you want to reconfigure an extenders Wi-Fi connection to another network, perform the following steps. Note that you will need to reconnect the Wi-Fi devices in your home or office to the newly configured network. 9:41 PM 100%

9:41 PM 100%

Sketch 9:41 AM 100%

My Range Extender PLUG NETWORK WIRELESS CLIENTS 3 Total Clients NETWORK DETAILS 2.4 MyHome_1_EXT GHz 5 GHz MyHome_2_EXT Network Details 2.4 GHz EXTENDED NETWORK 2.4 GHz Network Name MyHome_1 Network Password: 12345678 Uplink Signal Strength 84%

Uplink Connection Speed 252 Mbps 5 GHz EXTENDED NETWORK 5 GHz Network Name MyHome_2 Network Password: 12345678 Uplink Signal Strength 84%

Uplink Connection Speed 252 Mbps Joining your network Please enter your Wi-Fi password so we can invite your device to join. Make sure you enter the correct password to prevent failed installation. MyHome_1 Password Save password Open network (not common) N E X T Id like to use a different network. 15 www.tp-link.comUsers ManualWi-Fi Extender+1. On the Devices screen, tap on the row of the Wi-Fi Extender+ to go to its controls. 2. Tap NETWORK to switch to the Extended Network view. 3. Tap anywhere in the Network Details section. 4. Within the Network Details screen, tap on the reconfigure and confirm when prompted.

(Edit) icon of the Wi-Fi connection you want to 5. On the Joining your network screen, tap the current Wi-Fi network name (SSID) or Id like to use a different network, and then choose another network to connect the extender to. 6. Enter the Wi-Fi password of the selected network. Please make sure that you enter the correct password to prevent failed connection. 7. Tap NEXT

. Note that if you change the Wi-Fi network name (SSID) and Wi-Fi password of your main (host) network, the Wi-Fi Extender+ will need to be reconfigured to connect to the network with the changes. You can simply re-add the extender using the Add Device process and follow the apps instructions. Be careful not to reset the Wi-Fi Extender+ when prompted. Managing Network Access You also have the ability to view and manage wireless clients (users) connecting to your extended network(s). You can get the details of the clients, block or unlock them. 9:41 PM Client List 100%

9:41 PM Client List 100%

9:41 PM 100%

2.4 GHz 5.0 GHz TOTAL 2 1 3 2.4 GHz 2 1 0 Client Details My Range Extender 2.4 GHz 2.4 GHz 5 GHz My iPhone

<1 min 250 Mbps 30 min 250 Mbps My Windows Laptop 250 Mbps 2 hr 2.4 GHz 2.4 GHz My iPhone Client Alias:

IP: 192.168.1.32 Connected Network:

Up-Time:

Connection Speed:

MAC Address:

IP Address:

My Macbook Pro 2.4 GHz 1 hr 40 min 280 Mbps 00:01:02:03:04:05 192.168.1.32 5 GHz My Windows Laptop IP: 192.168.1.32 BLOCK CLIENT BLOCK CLIENT WIRELESS CLIENT S 3 Total Clients NETWORK DE TAILS MyHome_1_EXT MyHome_2_EXT 2.4 GHz 5 GHz 1. On the Devices screen, tap on the row of the Wi-Fi Extender+ to go to its controls. 2. Tap NETWORK to switch to the Extended Network view. 3. Tap on the 1 (hexagon client count) in the Wireless Clients section. 16 www.tp-link.comUsers ManualWi-Fi Extender+My Macbook ProCONNECTEDBLOCKEDIP: 192.168.1.32My Macbook Pro5.0 GHzETHERNETCONNECTEDBLOCKED 4. On the Client List screen, you can block the current wireless clients listed under the CONNECTED tab by tapping on the row of the client. To unblock a client, tap on the BLOCKED tab to view the blocked clients list, then tap on the row of the blocked client and confirm when prompted. 17 www.tp-link.comUsers ManualWi-Fi Extender+Home Automation with Integrated Smart Plug The Wi-Fi Extender+ is equipped with a Smart Plug that lets you to control and automate your connected lights and other household electronic devices via the Kasa app. Scheduling You can set up the Smart Plugs schedule, which is made up of Events, to automate your connected devices to work around your home and work schedules, such as setting the lights to come on at dusk and turn off at sunrise. 9:41 PM Schedule 100%

9:41 PM 100%

Create Event Your Schedule lives here Build a Schedule by creating Events, using this button on the top right. At 4 5 6 7 8

:

5 8 5 9 0 0 0 1 0 2 am pm Turn my Smart Plug ON Repeating every S M T W T F S CANCEL SAVE 1. On the Devices screen, tap on the row of the Wi-Fi Extender+ that you want to create a schedule for. 2. Tap

(Schedule) to open the Schedule screen. 3. Tap to create an event. 4. Within the Create Event screen, set the time, your preferred state (ON or OFF) for the connected device, and repeating frequency. You can set the Events time for sunrise or sunset by tapping the arrows next to the time. The time of the Event will synchronize with your local sunrise and sunset times for each day. 5. Tap Save. You can create as many events as you like and edit them at anytime from the Schedule screen. To edit a scheduled Event, simply tap the row for it. To delete it, you can swipe left on the row on an iOS device, or long-press the row on an Android device. If you want to temporarily disable an Event, just turn off its toggle from the Schedule screen. Please note that up to 32 events can be set on a Wi-Fi Extender+. 18 www.tp-link.comUsers ManualWi-Fi Extender+9:41 PM Schedule 100%

6 00:

amam S M T W T F S 9 00:

One time only amam 7 15:

pm S M T W T F S 7 00:

pmpm S M TW T FS S M TW T FS ONON OFFOFF 7 00:

pm S M T W T FS Delete Timer Timer can be set to automatically turn the lights or household appliances plugged into the Wi-Fi Extender+ ON or OFF after the countdown time has elapsed. 9:41 PM Timer 100%

AfterAfter 4 5 66 7 8 hrshrs 5 8 5 9 00 00 minmin 0 1 0 2 Turn my Smart Plug Turn my Smart Plug ON START 1. On the Devices screen, tap on the row of the Wi-Fi Extender+ to go to its controls. 2. Tap

(Timer) to open the Timer screen. 3. Set the timer duration in Hours and Minutes. 4. Set your preferred state (ON or OFF) to be triggered once the countdown timer is complete. 5. Tap Start. Note that if a timer overlaps an existing scheduled Event, that schedule will not run. If it overlaps Away Mode, the device will resume away behavior after the timer expires. However, timer will be canceled 19 www.tp-link.comUsers ManualWi-Fi Extender+OFFOFFONON when power is lost or interrupted, or at any time you turn ON/OFF the device manually using Kasa or the physical ON/OFF switch. You may need to set a new timer if desired. Runtime Report The Runtime report provides a statistical information about how long the Wi-Fi Extender+ has been running. To view the Runtime report, tap anywhere in the Usage section of the Wi-Fi Extender+s details screen. 100%

9:41 PM Runtime TODAY Current Runtime Total Runtime 2.80 hrs 3.10 hrs PAST 7 DAYS Daily Average Total Runtime 5.00 hrs 35.0 hrs PAST 30 DAYS Daily Average Total Runtime 4.00 hrs 120 hrs 20 www.tp-link.comUsers ManualWi-Fi Extender+Creating Scenes Take full advantage of your TP-Link Smart Home devices in your home with Scenes. A scene is a preset group of Smart Devices (such as Wi-Fi Extender+, Smart Wi-Fi Plugs Mini and Smart Wi-Fi Switches) that can be customized and controlled simultaneously at the touch of a button from your smartphone or tablet to easily set your mood or fit any special occasion. For example, set a customized Movie Time to turn on the home theater system plugged into a Wi-Fi Extender+ and dim down the lights controlled by the Smart Wi-Fi Switches in your Entertainment Room to 10% at the same time. Please keep in mind that SCENES can only be set and controlled once youre signed in to your Kasa account. 1. On the main Home screen, tap on the

(Scenes) tab to switch to the Scenes view. 2. Choose one of the preset scenes to start, or choose Custom to set up your own scene that is personalized to suit individual preferences and needs. To set a scene, you will need to select one or more devices to be controlled, and then define their actions and/or states. Note that you must have at least one Smart Device in order to create a scene. 21 www.tp-link.comUsers ManualWi-Fi Extender+DevicesScenesScenes let you set the mood of your home in one tap.Good MorningGet ready for the day by turning on your devicesMovie NightDim the lights for showtimeGood NightTurn everything off before bedtimeCustomCreate your own scene9:41 PM100%ScenesBedroom LampBULBSPREVIEWMain Kitchen LightsSide Kitchen LightsChristmas GnomeSWITCHESPLUGS60%Party BulbONOFFNext9:41 PM100%Set Scene!Configuring Wi-Fi Extender+ via a Web Browser The Wi-Fi Extender+s web-based interface lets you configure your extended network via a web browser on your computer, mobile device, or tablet. Please make sure that you connect the smart device to the extended network before any configuration. Changing Admin Account The default admin account credentials to log into the extenders web interface are admin (all lowercase) for both username and password. It is strongly recommended that you change the default to something unique to protect your Wi-Fi Extender+ and its settings from unauthorized access. Note that you will be prompted to change the default admin account at the first time you access the web-based interface. If you wish change the admin account at a later time, follow the following steps. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field. 2. Log in using the admin credentials. If you have not changed the default admin account, enter admin

(all lowercase) for both username and password. http://tplinkrepeater.net admin admin LOGIN 3. Go to Settings > System Tools > Admin Account. 4. Enter your current username and password into the Old Username and Old Password fields respectively. 5. Enter your new username and password into the New Username and New Password fields, then enter the password again to confirm. Be sure to choose a strong, but memorable password. 6. Click to confirm the changes. 22 www.tp-link.comUsers ManualWi-Fi Extender+! You will be prompted to log back in using the new admin account. Dashboard Every time you log into the web-based interface, you will be taken to the visual dashboard (or control panel) of your Wi-Fi Extender+. The dashboard provides an overview of your extended networks and allows you to view the current status of the Wi-Fi Extender+, detailed information about the uplink connection (the Router), and see whos currently connected to your extended networks. Normal network connection status. The Wi-Fi Extender+ is not connected to the router. 23 www.tp-link.comUsers ManualWi-Fi Extender+ The Wi-Fi Extender+ is connected to the router, but Internet is not available. The Wi-Fi Extender+ is partially connected to the router. Make sure the extender is set to obtain an IP address automatically under Network > Network Settings. Wi-Fi icon indicator for 2.4GHz and 5GHz networks:

Wi-Fi Icon Indication A secure Wi-Fi connection. A non-secure Wi-Fi connection. No Wi-Fi connection. Extending Another Wi-Fi Network If you want to change the extenders connection to a different Wi-Fi network, you can repeat the Quick Setup or follow the steps below without using the Quick Setup. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Wireless > Uplink Wi-Fi. 24 www.tp-link.comUsers ManualWi-Fi Extender+

3. Enable the Connect to routers 2.4GHz Network checkbox to extend the 2.4GHz band of the main

(host) network. 4. Click to scan for available 2.4GHz networks near you. 5. Select the Wi-Fi network that you wish to extend from the list.

!

If your Wi-Fi network doesnt appear in the list, its SSID may be hidden, click the to close the list and enter the SSID, Security, and Password of the main (host) network. These fields are case-sensitive. 6. If the selected network is protected, enter the Wi-Fi password. Note that the Security of the selected network will automatically populate. 7. If your router supports the 5GHz band, and you wish to extend the 5GHz network, repeat step 3 to 6. 8. Click to apply your settings. 25 www.tp-link.comUsers ManualWi-Fi Extender+Extended Network Settings You can customize and/or hide the wireless network name (SSID) to add extra security for your extended networks. However, you cannot change the extenders Wi-Fi security and password. You must use the same Wi-Fi password of the main (host) network to connect your wireless devices to the extended network. The steps to change the extended networks SSID are as follows. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Wireless > Extended Wi-Fi. 3. You can change the following Wi-Fi settings to secure your extended networks. a. Extended 2.4GHz and Extended 5GHz: The extended network (2.4GHz) is enabled by default. Deselect Enable if you do not want to use that extended network. b. Extended 2.4GHz SSID and Extended 5GHz SSID: You can enter a new SSID or click to use the same SSID as the main (host) network. c. Hide SSID broadcast: Select this checkbox to hide the extenders SSID from the Wi-Fi network list. 4. Click to save the extended network settings. 26 www.tp-link.comUsers ManualWi-Fi Extender+Wi-Fi Access Control By default, the Access Control function is disabled, and any wireless devices can connect to the extended networks through the SSID and Wi-Fi password. However, you can restrict Wi-Fi access to specific devices on your extended networks using the Access Control function. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Wireless > Access Control. 3. Toggle On to enable the Access Control function. 4. Under Access Mode, select Blacklist or Whitelist. Blacklist: The devices in this list are not allowed to connect to the extended network. Whitelist: Only the devices in this list are allowed to connect to the extended network. 5. Click

. To add one or more wireless devices (clients) to the Blacklist:

1. In the Online Devices list, displaying all wireless devices that are currently connected to the extended network. To block a device, click the

(Block) icon on the row of the device. It will be added to the Device in Blacklist. To block multiple devices, select the checkboxes of the devices and click right of the listing. Those devices will be added to the Devices in Blacklist. at the top-

27 www.tp-link.comUsers ManualWi-Fi Extender+To add a device to the Blacklist or Whitelist using its MAC address:

1. Under the Devices in Blacklist or Devices in Whitelist, click

. 2. Enter the Device Name. 3. Enter the devices MAC Address in hexadecimal format (0-9, a-f, A-F) separated by a dash (for example, 00-FC-E9-98-7E-A0). 4. Click

. To modify the devices name or its MAC address, or remove the device from the Blacklist or Whitelist, click the

(Trash) icon on the row of the device.

(Edit) icon or the To remove multiple devices, select the checkboxes of the devices and click the listing. at the top-right of 28 www.tp-link.comUsers ManualWi-Fi Extender+Changing the IP address By default, the Wi-Fi Extender+ is configured to obtain its IP address automatically from your wireless router or Access Point (AP) that it connects to. If the wireless router does not have a DHCP server or its DHCP server is disabled, you can assign a static IP address to the extender.

! We do NOT recommend that you change the extenders IP address unless you are an experienced network administrator with strong knowledge of IP addressing, subnetting, and DHCP. Incorrect configuration can cause performance and network connection issues. To assign a static IP address:

1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Network. 3. Under the Network Settings section, select Use the Following IP Address and enter the static IP addresses in dotted-decimal notation into the following fields. a. IP Address: The IP address to be assigned to the extender. b. Subnet Mask: The subnet mask associated with the static IP address. c. Default Gateway: The gateway address of your wireless router or Access Point. 4. Click to apply your configuration. 29 www.tp-link.comUsers ManualWi-Fi Extender+! You will be disconnected from the extended network upon changing the IP address. To access the extenders web-based interface, enter http://tpinkrepeater.net or the new assigned IP address, and log in. DHCP Server By default, the Wi-Fi Extender+ is configured as a DHCP (Dynamic Host Configuration Protocol) server to automatically allocates dynamic IP addresses to DHCP clients connected to your extended networks. To change the DHCP Server settings:

1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Network. 3. Scroll down to the DHCP Server Settings section, select one of the following options:

Auto: This option is selected by default to automatically allocate IP addresses to devices. On: If you want the extender to allocate IP addresses from a IP address pool, select this option and enter the following:

a. IP Address Pool: Enter the starting and ending IP addresses in dotted-decimal notation. These addresses must be in the same subnet as the main (host) network. b. Address Lease Time: Enter the time duration that an IP address is leased to the client between 1 and 2880 minutes. The default is 1 minute. c. Default Gateway: Enter the LAN IP address of your main (host) network. This field is optional. d. Primary DNS: Enter the primary DNS address of your main (host) network. This field is optional. e. Secondary DNS: Enter the secondary DNS address of your main (host) network. This field is optional. 30 www.tp-link.comUsers ManualWi-Fi Extender+f. Off: If selected, you must have another DHCP server within your LAN; otherwise, you have to assign an IP address for each client manually. 7. Click to save your DHCP Server configuration. DHCP Client List The DHCP Client List displays the following information of each DHCP client that is currently connected to the extended networks. Use the Refresh button to update the client list. Client Name: The name of the DHCP client. MAC Address: The DHCP clients MAC address. Assigned IP Address: The IP address that is allocated to the DHCP client by the DHCP server. Lease Time: The time duration that the IP address is leased to the DHCP client. Wireless Adapter The Range Extender can also be used as a wireless adapter to connect any Ethernet-only device, such as a Blu-ray player, game console, DVR, or Smart TV, to your Wi-Fi network. Once the Wi-Fi Extender+ is successfully connected to your Wi-Fi networks, simply connect the Ethernet-only device and the extender using an Ethernet cable. By default, the wired device connecting to the extenders LAN port automatically connects to the 5GHz extended network. If you want the Ethernet-only device to connect to the 2.4GHz extended network, follow the steps below. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to Network. 3. Scroll down to the Ethernet Traffic (Wired Network) section, and select the 2.4GHz option. 4. Click to apply your changes. 31 www.tp-link.comUsers ManualWi-Fi Extender+Other Administrative Tools The System Tools allow you to perform other administrative tasks, such as time settings, firmware upgrade, backup and restore the Wi-Fi Extender+. Time Settings The Time Settings are very important for the time-based features, such as LED Control, System Log, and Access Control, to work properly. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to System Tools > Time Settings. 3. Make sure the the current System Time is displayed correctly. If it is not, select the Time Zone of where the Wi-Fi Extender+ is located. Then, enter the IP address or domain name of the NTP

(Network Time Protocol) Server to automatically synchronize the time with the timeservers that are available on the Internet. 4. Click to apply your changes. LED Control The LED Indicator lights (2.4G, 5G, Status, Power, as well as the Smart Plugs LED) can be turned ON or OFF by pressing the physical LED button on the Wi-Fi Extender+, or you can set a specific schedule for the LED Indicator lights to turn OFF at night and turn ON at dawn with Night Mode.

! Before enabling the Night Mode feature, make sure the extenders time zone is set to your proper time zone under Settings > System Tools > Time Settings. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 32 www.tp-link.comUsers ManualWi-Fi Extender+2. Under the Settings tab, go to System Tools > LED Control. 3. Select Night Mode to enable the Night Mode feature. 4. Under LED Off Time, select the time range (from and to) during which the LEDs will be off in 24-hour time format. 5. Click to activate the Night Mode feature. System Log The System Log displays a list of the most recent activities (events) of the Wi-Fi Extender+. You can define which type of logs and/or the level of logs you want to view. You also have the ability to export the system log as a text file to your computer. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to System Tools > System Log. 3. Under Log Filter, select the type of logs and/or the log level you want to view. All is the default selection for displaying all log types and log levels. Click Click Click computer. to update the system log. to permanently remove all system logs.

(located at the end of the list) to export the system log as a text (*.txt) file to your 33 www.tp-link.comUsers ManualWi-Fi Extender+Cloud Setting Binding the Wi-Fi Extender+ to your Kasa account to enjoy the convenience of controlling the devices plugged into the Smart Plug and managing your extended networks from anywhere and at any time using the Kasa app. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to System Tools > Cloud Setting. 3. Enter your Kasa account email address and password. 4. Enter a descriptive name (an alias) for your Wi-Fi Extender+. 5. Click

. 34 www.tp-link.comUsers ManualWi-Fi Extender+Maintaining the Wi-Fi Extender+

Firmware Upgrade To keep your Wi-Fi Extender+ or other Smart Home devices working at peak performance and up-to-date with all the latest improvement or important fixes, we recommend that you update the firmware when updates are available. You can perform firmware upgrade on a computer or directly via the Kasa app. To update firmware via Kasa:

9:41 PM 100%

9:41 PM 100%

Firmware Update New Updates Available We found available firmware updates for your reachable devices. Updating firmware Please do not unplug your devices during the update. Smart Plugs Latest Version: 1.2.0 4 Available Updates Smart Bulb HS100 Latest Version: 1.2.0 2 Available Updates Smart Bulb HS120 Latest Version: 1.2.0 0 Available Updates UPDATE UPDATE 25%

This process may take a few minutes. 1. Tap the

(navigation drawer) and then Settings. 2. Tap Firmware Update. 3. Within the Firmware Update screen, devices that have available update are shown by device type group. Tap Update and confirm at the prompt. Remember: Only the Wi-Fi Extender+ that are currently reachable and have an available update will be shown in the Firmware Update screen. It is important to leave the Kasa app running while it finishes updating the Wi-Fi Extender+. Try not to minimize the app, close the app, or interrupt the update to prevent problems. To upgrade firmware via a computer:

Before upgrading the firmware of the Wi-Fi Extender+, visit www.tp-link.com/support to search for and download the latest firmware to your computer. 35 www.tp-link.comUsers ManualWi-Fi Extender+!

IMPORTANT: To prevent upgrade failure, please note the following:

Make sure that the latest firmware file you downloaded matches the Hardware Version as displayed under the Settings > System Tools > Firmware Upgrade page. Make sure you have a stable connection (wired or wireless) between the Wi-Fi Extender+ and the computer performing the firmware upgrade. Backup your current configuration from the Settings > System Tools > Backup & Restore page. Do NOT unplug the Wi-Fi Extender+ during the firmware upgrade. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to System Tools > Firmware Upgrade. 3. Click to locate and select the downloaded firmware file. 4. Click to start upgrading the firmware.

! The firmware upgrade takes a few minutes to complete, and the Wi-Fi Extender+ will automatically reboot. Please DO NOT unplug the Wi-Fi Extender+ or interrupt the firmware upgrade or reboot processes. Backup and Restore It is highly recommended to backup your current configurations on a regular basis, before factory resetting, or firmware upgrading. In the case of network failure or poor Wi-Fi performance, you will be able to restore the Wi-Fi Extender+ to its previous state.

! Please DO NOT unplug the Wi-Fi Extender+ or interrupt the backup or restore process. 1. Connect your computer to the Wi-Fi Extender+ via a wired or wireless connection. 2. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the 36 www.tp-link.comUsers ManualWi-Fi Extender+admin credentials. 3. Under the Settings tab, go to System Tools > Backup & Restore. 4. Under the Backup section, click

(*.bin) file to your computer. to save a copy of your current configuration as a binary

! Make sure you save the backup file in a safe location where you can retrieve it when needed. To restore the Wi-Fi Extender+ to its previous state:

1. Under the Settings tab, go to System Tools > Backup & Restore. 2. Under the Restore section, click to locate and select the saved binary (*.bin) file. 3. Click to start the restore process.

! The restore process takes a few minutes to complete. DO NOT unplug the Wi-Fi Extender+

or interrupt the restore process. After reverting back to a previous state is finished, the Wi-Fi Extender+ will automatically reboot. 37 www.tp-link.comUsers ManualWi-Fi Extender+Resetting Resetting the Wi-Fi Exender+ can help you troubleshoot any issues that you may have. There are two types of reset you can perform on your Wi-Fi Extender+, Soft Reset and Hard Reset. The Reset button is located on the left side of the Wi-Fi Extender+. Soft Reset Press and hold the Reset button for about 5 seconds, or until the Status LED starts to flash amber and green alternately to only reset the network settings without losing your current configuration and initiate the app onboarding (SoftAP) process. Hard Reset (Also known as Factory Reset) Press and hold the Reset button for about 10 seconds, or until the Status LED starts to flash amber rapidly to reset the Wi-Fi Extender+ to its factory defaults. Note that factory resetting the Wi-Fi Extender+ will erase all of your custom settings (such as network settings, schedules, and admin account credentials) and return them to an out-of-box configuration. Factory reset can also be done through the Wi-Fi Extender+s web interface. 1. Launch a web browser and enter http://tplinkrepeater.net into the URL field, then log in using the admin credentials. 2. Under the Settings tab, go to System Tools > Backup & Restore. 3. Under the Factory Default Restore section, click and confirm at the prompt. 38 www.tp-link.comUsers ManualWi-Fi Extender+! The factory reset takes a few minutes to complete. DO NOT unplug the Wi-Fi Extender+

or interrupt the factory reset process. The Wi-Fi Extender+ will automatically reboot when the factory reset is finished. To log back into the Wi-Fi Extender+, enter the default credentials admin for both username and password. 39 www.tp-link.comUsers ManualWi-Fi Extender+Troubleshooting Frequently Asked Questions 1. How do I restore my extenders configuration to its factory default settings?

There are two methods to factory reset the Wi-Fi Extender+. Keep in mind that factory resetting the Wi-Fi Extender+ will erase all of your custom settings (such as network settings, schedules, and admin account credentials) and return them to an out-of-box configuration. Via the Reset button With the Wi-Fi Extender+ powered on, press and hold the Reset button for about 10 seconds, or until all the Status LED starts to flash amber rapidly, then release the button. Via the extenders web interface Launch a browser and log in at http://www.tplinkrepeater.net. Under the Settings tab, go to System Tools > Backup & Restore. Then, click the FACTORY RESTORE button under Factory Default Restore. 2. I forgot my password, what should I do?

There are two types of passwords: Wi-Fi password and admin password that is used to access the extenders web interface. Wi-Fi password The Wi-Fi password to connect to your extended network is the same as your main (host) network. Admin account password The default Admin accounts username and password are admin (all lowercase). If you have changed and forgotten the Admin account, you will have to reset the Wi-Fi Extender+ to its factory defaults. Refer to the Resetting section for instructions. 3. What should I do when the Status LED is OFF?

Check your network connectivity. Avoid placing the Wi-Fi Extender+ near potential sources of radio signal interference such as microwave ovens, cordless phones, baby monitors, and motor-driven appliances. Soft reset the Wi-Fi Extender+ and repeat the app onboarding process. Factory reset the Wi-Fi Extender+ and try to add it to your network again. 4. What should I do if the 2.4G and 5G LEDs keep flashing green or are OFF?

When the 2.4G and 5G LEDs are flashing green, the Wi-Fi Extender+ is in the SoftAP mode, you need to set up the extender using Kasa or its web-based user interface. If both of the LEDs are not illuminated, which means the Wi-Fi Extender+ is not connected to your router, press and hold the Reset button for 5 seconds until the Status, 2.4G, and 5G LEDs 40 www.tp-link.comUsers ManualWi-Fi Extender+start to flash to initiate the SoftAP mode. Then, launch the Kasa app and add the extender again. 5. How to troubleshoot when the SoftAP process fails?

Press and hold the Reset button for about 5 seconds or until the Status, 2.4G and 5G LEDs start to flash, then release the button. When the Status, 2.4G and 5G LEDs are flashing green, follow the Kasa apps prompts to set up your Wi-Fi Extender+ again. Alternatively, you can set up the Wi-Fi Extender+ using a web browser on your computer. 6. What should I do when I cannot access the extenders web interface using a computer?

Make sure that your mobile device or computer is connected to the extended network. If you have not configured the Wi-Fi Extender+, connect to the default network name (SSID): TP-

LINK_2G_EXT or TP-LINK_5G_EXT. Make sure that your computer is set to obtain an IP address automatically (DHCP). 7. Which devices can I plug into the Smart Plug?

You can plug in your electronic devices and small appliances, such as lamps, humidifiers, portable heaters, and fans. The Smart Plug is rated to handle loads of up to 15 amps. Please do not exceed the recommended electrical ratings. 8. What should I do when the plugged-in device wont respond to Kasas commands?

Make sure the device plugged into the Smart Plug is switched to ON. Check your network connectivity. Check the extenders connection. Check if the 2.4G and 5G LEDs are lit green. If they are flashing green or off, reconnect the Wi-Fi Extender+ to your Wi-Fi network. Power cycle your router and/or reboot the Wi-Fi Extender+ by unplugging it and plugging it back in. Factory reset the Wi-Fi Extender+. Refer to the FAQ #1. 9. How do I pair the Wi-Fi Extender+ with Amazon Echo?

Visit www.tp-link.com/en/faq-944.html or within the Kasa Help section for pairing instructions, then you can interact with your plugged-in devices using voice recognition. For example, to command Alexa to turn on the Wi-Fi Extender+ named Bedroom Lights, simply say, Alexa, turn on Bedroom Lights. Usage Tips Place your Wi-Fi Extender+ midway between your wireless router and the Wi-Fi dead zone. Avoid physical obstructions and radio interference in the surrounding area. 41 www.tp-link.comUsers ManualWi-Fi Extender+Support If you encounter any issues with the Wi-Fi Extender+ or configuration, please visit www.tp-link.com/support for web support and troubleshooting information. 42 www.tp-link.comUsers ManualWi-Fi Extender+Specifications General Standards and Protocols:

IEEE 802.3, IEEE 802.3u, IEEE 802.11a, IEEE 802.11n, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11e, IEEE 802.11i, IEEE 802.11ac, TCP/IP, DHCP Safety & Emission:

CE Ports One 10/100/1000M Auto-Negotiation LAN RJ45 port System Requirements:

Android 4.1 or higher, iOS 8 or higher Frequency Band:

Radio Data Rate:

Wireless 2.4GHz: 2.4~2.4835GHz 5GHz: 5.15~5.25GHz 2.4GHz:

11n: Up to 450Mbps 11g: 54/48/36/24/18/12/9/6Mbps 11b: 11/5.5/2/1Mbps 5GHz:

5.15~5.25GHz 11ac: Up to 1300Mbps 11n: Up to 450Mbps 11a: 54/48/36/24/18/12/9/6Mbps Security WEP, WPA-PSK, WPA2-PSK Physical and Environment Working Temperature:

0o ~ 40o (32o ~ 104o) Working Humidity:

10% ~ 90% RH, Non-condensing Storage Temperature:

-40o ~ 70o (-40o ~ 158o) Storage Humidity:

5% ~ 95% RH, Non-condensing 43 www.tp-link.comUsers ManualWi-Fi Extender+Operating Temperature: 0C~40C (32F~104F) Storage Temperature: -20C~70C (-4F ~158F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Environment:

Limited Warranty To learn more about the Limited Warranty for TP-Link products, please visit www.tp-link.us/support/rma. 44 www.tp-link.comUsers ManualWi-Fi Extender+Users Manual FCC Statement Wi-Fi Extender+

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Users Manual Wi-Fi Extender+

The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement:

1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Dclaration dexposition aux radiations Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice Safety Information When product has a power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to completely shut off the power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. AC voltage Indoor use only Energy efficiency Marking RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Users ManualWi-Fi Extender+