all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 3.20 MiB | ||||
1 2 |
|
Internal Photos | Internal Photos | 1.15 MiB | ||||
1 2 |
|
External Photos | External Photos | 739.58 KiB | ||||
1 2 |
|
ID Label/Location Info | ID Label/Location Info | 714.25 KiB | ||||
1 2 |
|
Ad Hoc Declaration | Cover Letter(s) | 110.46 KiB | ||||
1 2 |
|
Confidentiality | Cover Letter(s) | 131.92 KiB | ||||
1 2 |
|
DOC | Cover Letter(s) | 100.48 KiB | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 76.65 KiB | ||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report |
1 2 | Users Manual | Users Manual | 3.20 MiB |
TRENDnet Users Guide Cover Page TRENDnet Users Guide Table of Contents Table of Contents Product Overview ........................................................................... 1 Package Contents .......................................................................................................... 1 Connect wireless devices to your router ..................................................................... 26 Connect wireless devices using WPS ........................................................................... 26 PBC (Software/Virtual Push Button) .................................................................. 27 PIN (Personal Identification Number)................................................................ 27 Features ......................................................................................................................... 1 Advanced wireless settings ......................................................................................... 28 Product Hardware Features........................................................................................... 3 Application Diagram ...................................................................................................... 4 Router Setup ................................................................................... 5 Multiple SSID ..................................................................................................... 28 Wireless bridging using WDS (Wireless Distribution System) ........................... 29 Wireless Client Bridge Mode ............................................................................. 31 Advanced Settings ............................................................................................. 32 Creating a Home Network ............................................................................................. 5 Steps to improve wireless connectivity ....................................................................... 34 Router Installation ......................................................................................................... 6 Advanced Router Settings ............................................................. 35 Connect additional wired devices to your network ....................................................... 9 Change your router login password ............................................................................ 35 Basic Router Settings ..................................................................... 10 Manually configure your Internet connection ............................................................ 35 Access your router management page ........................................................................ 10 IPv6 Settings ................................................................................................................ 36 Network Status ............................................................................................................ 10 Clone a MAC address ................................................................................................... 37 Committing your router configuration changes .......................................................... 11 Change your router IP address .................................................................................... 37 Wireless Settings ......................................................................................................... 12 Set up the DHCP server on your router ....................................................................... 38 Guest Network ............................................................................................................. 13 Set up DHCP reservation ............................................................................................. 39 Parental Control ........................................................................................................... 15 Enable/disable UPnP on your router ........................................................................... 40 Access Rule (MAC/IP Filter) ............................................................................... 15 Website Filter..................................................................................................... 17 Qualcomm StreamBoost ........................................................... 18 Enable StreamBoost .......................................................................................... 18 My Network ....................................................................................................... 19 Priorities ............................................................................................................. 21 Usage by Time .................................................................................................... 21 Usage by Data .................................................................................................... 22 Wireless Networking and Security ................................................. 23 How to choose the type of security for your wireless network .................................. 23 Secure your wireless network ..................................................................................... 24 Copyright 2016 TRENDnet. All Rights Reserved. Enable/disable Application Layer Gateways (ALG) ...................................................... 40 Allow/deny multicast streaming.................................................................................. 41 Identify your network on the Internet ........................................................................ 41 Set your router date and time ..................................................................................... 42 Create schedules ......................................................................................................... 43 Access Control (IP Protocol Filter) ............................................................................... 44 Inbound Filter .............................................................................................................. 45 Open a device on your network to the Internet .......................................................... 46 DMZ ................................................................................................................... 46 i TRENDnet Users Guide Table of Contents Virtual Server ............................................................................................................... 46 Diagnostic Tools ........................................................................................................... 65 Special Applications ........................................................................................... 48 Wireless Client List ...................................................................................................... 65 Allow remote access to your router management page ................. 50 Check the router system information ......................................................................... 66 Add static routes .......................................................................................................... 50 View your router log .................................................................................................... 68 Enable Dynamic Routing .............................................................................................. 51 Router Management Page Structure ............................................. 69 Using External USB Storage ........................................................... 52 Technical Specifications ................................................................ 70 File Sharing Server ....................................................................................................... 52 Troubleshooting ........................................................................... 72 iTunes Server ..................................................................................................... 52 DLNA Server ....................................................................................................... 52 Samba Server ..................................................................................................... 52 FTP (File Transfer Protocol) Server .............................................................................. 54 BitTorrent Client Settings ............................................................................................ 55 Virtual Private Networking (VPN) .................................................. 56 Creating a Virtual Private Network .............................................................................. 56 Router Maintenance & Monitoring ................................................ 61 Reset your router to factory defaults .......................................................................... 61 Router Default Settings ............................................................................................... 61 Backup and restore your router configuration settings .............................................. 62 Reboot your router ...................................................................................................... 62 Upgrade your router firmware .................................................................................... 63 Allow/deny ping requests to your router from the Internet ....................................... 64 How to capture network packets ................................................................................ 64 Appendix ...................................................................................... 73 Copyright 2016 TRENDnet. All Rights Reserved. ii TRENDnet Users Guide Product Overview TEW-827DRU Features TRENDnets AC2600 StreamBoost MU-MIMO WiFi Router, model TEW-827DRU, is built to perform in a busy connected home. It generates two extreme quad-stream WiFi networksa 1,733 Mbps WiFi AC and a concurrent 800 Mbps WiFi N network. MU-
MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance when multiple devices access the network. Qualcomm StreamBoost technology prioritizes low latency gaming and voice streams, shapes network traffic to optimize each connected experience, and graphically displays all connected device/app traffic. Use the Gigabit Ethernet ports and USB 3.0 share ports to further extend an extreme performance home network. Easy Setup Get up and running in minutes with the intuitive guided setup AC2600 WiFi Concurrent dual band quad-stream 1,733 Mbps WiFi AC + 800 Mbps WiFi N bands MU-MIMO Performance MU-MIMO technology enables the router to processes multiple data streams simultaneouslywith so many connected devices in todays home, MU-MIMO increases real-time WiFi performance Qualcomm StreamBoost Latency Prioritization StreamBoost prioritizes latency for gaming and voice streams to eliminate stutter or lag caused by other high bandwidth network traffic such as torrent downloads Qualcomm StreamBoost Traffic Shaping StreamBoost intelligently allocates the optimal amount of bandwidth for each individual device/application and users can manually assign device priority 1 TEW-827DRU Package Contents In addition to your router and 4 detachable high gain antennas, the package includes:
If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. Copyright 2016 TRENDnet. All Rights Reserved. TRENDnet Users Guide Qualcomm StreamBoost Device/Traffic Mapping See all connected network devices/applications and their respective real-time network usage and review historical usage data Pre-Encrypted Wireless For your convenience the WiFi is pre-encrypted with its own unique password Wireless Coverage High performance amplifiers and detachable external high gain antennas maximize wireless coverage Gigabit Ports Gigabit ports support high performance wired connections USB 3.0 Share Ports Share content across the network with the 5 Gbps USB 3.0 share ports Guest Network Create an isolated network for guest internet access only Parental Controls Control access to specific websites and control connected device access to the network One Touch Connection Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button Targeted Beamforming Beamforming increases real-time performance by directing stronger wireless signals to your specific location Copyright 2016 TRENDnet. All Rights Reserved. Backward Compatible Compatible with legacy wireless devices TEW-827DRU File Sharing Support Management controls to optimize BitTorrent sharing, iTunes server streams, and Samba
(SMB) clients
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 1.733 Gbps use with a 1.733 Gbps 802.11ac wireless adapter. For maximum performance of up to 800 Mbps, use with an 800 Mbps 802.11n wireless adapter. Multi-User MIMO (MU-MIMO) requires the use of multiple MU-
MIMO enabled wireless adapters.
** Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.
***Qualcomm StreamBoost is a trademark of Qualcomm Atheros, Inc. 2 TRENDnet Users Guide Product Hardware Features Rear View TEW-827DRU No 1 2 Item LED On/Off Button USB 3.0 Ports 3 4 5 6 7 8 9 WPS Button (Wi-Fi Protected Setup) Gigabit LAN Ports 1-4
(Black) Gigabit WAN/Internet Port
(Yellow) WiFi On/Off Button Reset Button On/Off Power Switch Power Port Description Push to turn front panel LEDs on or off. Connect USB storage devices to share over the network via FTP or Windows SMB/CIFS, Samba, BitTorrent client, iTunes Server, and DLNA server. Push and hold this button for 3 seconds and release to activate WPS. The Power LED on front panel will blink when WPS is activated. Connect Ethernet cables (also called network cables) from your router LAN ports to your wired network devices. Connect an Ethernet cable from your router Internet port to your modem. Push and hold this button for 5 seconds and release to turn WiFi (2.4GHz & 5GHz) on or off. It may take up to 15 to completely turn on or off WiFi after the button is released. The 2.4G and 5G LEDs will turn on or off to indicate the WiFi status. Using a pen or paperclip, push and hold the reset button for 15 seconds and release to reset the router. Push the router On/Off power switch to turn your router On (Inner position) or Off (Outer position). Connect the included power adapter from your router power port and to an available power outlet. 7 1 2 3 4 5 6 9 8 Copyright 2016 TRENDnet. All Rights Reserved. 3 TRENDnet Users Guide Front View Application Diagram TEW-827DRU 5 3 4 1 2 Description Solid Blue Device is on Blinking Blue WPS is activated. Off No power Solid Blue Internet port is physically connected Blinking Blue Data Transmit/Receive. Off Internet port is physically disconnected. Solid Blue LAN port is physically connected Blinking Blue Data Transmit/Receive. Off LAN port is physically disconnected. Solid Blue 2.4GHz/5GHz radio is on. Blinking Blue Data Transmit/Receive. Off 2.4GHz/5GHz radio is off. Solid Blue USB device is connected. Blinking Blue Data Transmit/Receive. Off No USB device connected. No 1 Item Power/WPS LED Internet Port LED Gigabit LAN Ports 1-4 LEDs 2.4GHz/5GHz Wireless LEDs USB LED 2 3 4 5 The router is installed near the modem (typically supplied by your ISP Internet Service Provider) and physically connected to it from the routers Internet port to the modems network port which connects to the Internet. 2.4GHz wireless signals from the router are broadcasted to wireless clients such as laptops (with wireless capability) and the less congested 5GHz wireless signals from the router are broadcasted to other wireless client devices such as TVs, game consoles, or media bridges thereby providing Internet access for all wireless client devices. Copyright 2016 TRENDnet. All Rights Reserved. 4 TRENDnet Users Guide Router Setup Creating a Home Network What is a network?
A network is a group of computers or devices that can communicate with each other. A home network of more than one computer or device also typically includes Internet access, which requires a router. A typical home network may include multiple computers, a media player/server, a printer, a modem, and a router. A large home network may also have a switch, additional routers, access points, and many Internet-capable media devices such as TVs, game consoles, and Internet cameras. Modem Connects a computer or router to the Internet or ISP (Internet Service Provider). Router Connects multiple devices to the Internet. Switch Connect several wired network devices to your home network. Your router has a built-in network switch (the LAN port 1-4). If you have more wired network devices than available Ethernet ports on your router, you will need an additional switch to add more wired connections. How to set up a home network 1. For a network that includes Internet access, youll need:
Computers/devices with an Ethernet port (also called network port) or wireless networking capabilities. A modem and Internet service to your home, provided by your ISP (modem typically supplied by your ISP). A router to connect multiple devices to the Internet. TEW-827DRU 2. Make sure that your modem is working properly. Your modem is often provided by your Internet Service Provider (ISP) when you sign up for Internet service. If your modem is not working contact your ISP to verify functionality. 3. Set up your router. See How to setup your router below. 4. To connect additional wired computers or wired network devices to your network, see Connect additional wired devices to your network on page 9. 5. To set up wireless security on your router, see Wireless Networking and Security on page 23. How to setup your router Refer to the Quick Installation Guide or continue to the next section Router Installation on page 6 for more detailed installation instructions. Where to find more help In addition to this Users Guide, you can find help below:
http://www.trendnet.com/support (documents, downloads, and FAQs are available from this Web page) Copyright 2016 TRENDnet. All Rights Reserved. 5 TRENDnet Users Guide Router Installation Before you Install Many Internet Service Providers (ISPs) allow your router to connect to the Internet without verifying the information fields listed below. Skip this section for now and if your router cannot connect to the Internet using the standard installation process, come back to this page and contact your ISP to verify required ISP specification fields listed below. 1. Obtain IP Address Automatically (Dynamic IP/DHCP) Host Name:_______________ (Optional, if required by ISP for Compatibilty) Primary DNS Server Address: _____. _____._____._____ (Optional) Secondary DNS Servers Address : _____. _____._____._____ (Optional) MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) 2. Static IP/Fixed IP address IP Address: _____. _____._____._____ (e.g. 215.24.24.129) Subnet Mask: _____. _____._____._____ Default Gateway IP Address: _____. _____._____._____ Primary DNS Server Address: _____. _____._____._____ Secondary DNS Servers Address : _____. _____._____._____ (Optional) MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) 3. PPPoE Dynamic IP (DHCP) / PPPoE Static IP Standard & Russian Type (Dynamic IP/DHCP or Static IP) IP Address (Static IP): _____. _____._____._____ (e.g. 215.24.24.129) Username: _________ Password: ________________ Service Name: _________________ (Optional) DNS Servers Address 1 (Static IP): _____. _____._____._____ DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional) Reconnect Mode: Always / On Demand / Manual (Optional) Copyright 2016 TRENDnet. All Rights Reserved. TEW-827DRU MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) 4. PPTP - Standard & Russian Type (Dynamic IP/DHCP or Static IP) PPTP IP Address: _____. _____._____._____ (e.g. 215.24.24.129) PPTP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0) PPTP Gateway:_____. _____._____._____ (e.g. 215.24.24.1) PPTP Server: _____________________ (e.g. 215.24.24.150) Username: _________ Password: ________________ Reconnect Mode: Always / On Demand / Manual (Optional) DNS Servers Address 1 (Static IP): _____. _____._____._____ DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional) MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) MPPE (Microsoft Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No) 5. L2TP - Standard & Russian Type (Dynamic IP/DHCP or Static IP) L2TP IP Address: _____. _____._____._____ (e.g. 215.24.24.129) L2TP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0) L2TP Gateway:_____. _____._____._____ (e.g. 215.24.24.1) L2TP Server: _____________________ (e.g. 215.24.24.150) Username: _________ Password: ________________ Reconnect Mode: Always / On Demand / Manual (Optional) DNS Servers Address 1 (Static IP): _____. _____._____._____ DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional) MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) MPPE (Microsoft Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No) 6 TRENDnet Users Guide Hardware Installation TEW-827DRU 1. Attach the antennas to the router and position them for the best WiFi coverage. It is recommended that you position all of the antennas vertically as shown below. 2. Verify that you have an Internet connection when connecting your computer directly to your modem. 9. Verify that the blue LEDs on the front of the router (Power, Internet, 2.4G, 5G) and port number of your connected computer (1, 2, 3, or 4) are on. 8. Turn on your modem. 7. Connect the power adapter to the router and then to a power outlet. Push the power on the back of the router to the On (Inner) position. 3. Turn off your modem. 4. Disconnect the Network cable from your computer to your modem. Note: If your modem includes a battery backup, remove the battery backup as well. 5. Connect your modem to the router Internet port (yellow). 6. Connect your computer to one of the router LAN ports (black). Copyright 2016 TRENDnet. All Rights Reserved. 7 TRENDnet Users Guide Setup Wizard TEW-827DRU 1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and the wizard will automatically appear. Note: If you have already configured your router before, the wizard will no longer appear automatically. In your web browser, go to http://tew-827dru or you can access the router management using the default IP address http://192.168.10.1. Your router will prompt you for a user name and password. Enter your user name and password and click Advanced > Setup > Wizard. 2. Select your Language and click Next. 4. Confirm your settings. This window displays your predefined router wireless settings and click Save to complete the wizard. Note: For added security, the router wireless network is pre-encrypted with its own unique wireless network security key. You can find the unique network security key and the pre-assigned network name (SSID) on a sticker on the side of the router and on a label on the bottom of the router. You will need this information to connect to the router. To change the network security key, refer to page 24 Secure your wireless network. If the router is reset to factory defaults, the wireless encryption will reset to the network security key printed on the product labels of the router. 3. The wizard will automatically detect your Internet connection. Note: If the wizard is unable to detect your Internet connection type, you will be prompted to select it. Select your Internet connection type and click Next. Note: Dynamic IP (DHCP) is typical for most Internet services. You can verify your settings with your Internet Service Provider. Copyright 2016 TRENDnet. All Rights Reserved. 8 TRENDnet Users Guide Connect additional wired devices to your network TEW-827DRU You can connect additional computers or other network enabled devices to your network by using Ethernet cables to connect them to one of the available LAN ports labeled 1,2,3,4 on your router. Note: If you encounter issues connecting to your network, there may be a problem with your computer or device network settings. Please ensure that your computer or device network settings (also called TCP/IP settings) are configured to obtain IP address settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server address settings automatically. Copyright 2016 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide Basic Router Settings Access your router management page Note: Your router management page URL/domain name http://tew-827dru or IP address http://192.168.10.1 is accessed through the use of your Internet web browser
(e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and will be referenced frequently in this Users Guide. 1. Open your web browser and go to URL/domain name http://tew-827dru or IP address http://192.168.10.1. Your router will prompt you for a user name and password. 2. For added security, the router is preconfigured with a unique password. You can find the Password on a sticker on the side of the router and on the label on the bottom of the router. Enter your Username and Password, select your preferred language, then click Login. User Name: admin Password: (xxxxxxxx) Note: User Name and Password are case sensitive. Copyright 2016 TRENDnet. All Rights Reserved. Network Status Basic > Network Status TEW-827DRU This section displays a brief summary of the routers basic settings and the connected devices. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic and click on Network Status. 10 TRENDnet Users Guide Internet: The Internet icon displays green to indicate that your router has successfully established an Internet connection. The Internet icon displays orange to indicate that a physical connection has been established on the Internet port of the router but with no successful Internet connection has been established. The Internet icon displays red to indicate that the Internet is physically disconnected. Guest Network: The Guest Network icon displays orange to indicate that there are no wireless guest networks currently enabled. The Guest Network icon will display green to indicate that you have at least one wireless guest network currently enabled. USB: The USB icon displays orange to indicate that there are no USB devices connect to the USB port(s). The USB icon displays green to indicate that are USB devices connected to the USB port(s). Wireless: The wireless icon displays green to indicate that wireless is enabled on both 2.4GHz and 5GHz bands. The wireless icon displays orange to indicate that only wireless band is enabled (2.4GHz or 5GHz). The wireless icon will display red to indicate that wireless is disabled on both 2.4GHz and 5GHz bands. Wireless Security: The wireless security section will display the current security settings configured for your wireless networks. It is strongly recommended to enable security on your wireless networks. Connected Devices: The connected devices section displays the list of network devices currently connected to your router. TEW-827DRU Committing your router configuration changes Apply/Discard Changes The router allows you to make multiple changes to the configuration and apply or discard all the configuration changes you have made all at the same time using the Apply/Discard Changes section in the router management page. After you have made multiple changes in the router configuration page, you will notice the Apply/Discard Changes counter with increase from 0 depending on the amount of changes you have applied. If the counter is not 0, you have pending configuration changes that will need to be applied. Once you have completed your changes, to commit your changes to the router, you must click on the Apply/Discard section in the router management page, and click Apply & Reboot to commit the changes to the router. You can also click Discard to click discard all of the changes you have configured. IMPORTANT NOTE: If you do not apply changes under the Apply/Discard section after you have made your router configuration changes, your router configuration changes will not be applied. Copyright 2016 TRENDnet. All Rights Reserved. 11 1. Log into your router management page (see Access your router management page to a wireless network that is set to 802.11ac only mode. TEW-827DRU Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless network may degrade the wireless network performance below the higher performance and data rates of 802.11n. Allowing 802.11a or 802.11n devices to connect to an 802.11ac capable wireless network may degrade the wireless network performance below the higher performance and data rates of 802.11ac. Wireless devices that only support 802.11n or 802.11a will not be able to connect Wireless devices that only support 802.11b or 802.11g will not be able to connect to a wireless network that is set to 802.11n only mode. Wireless devices that only support 802.11b will not be able to connect to a wireless network that is set to 802.11g only mode. Wireless devices that only support 802.11a will not be able to connect to a wireless network that is set to 802.11n only mode. TRENDnet Users Guide Wireless Settings Basic > Wireless (2.4GHz or 5GHz) This section outlines available management options under basic wireless sub tab for both 2.4GHz and 5GHz wireless sections. You can refer to the page 23 Wireless Networking & Security to configure your wireless security settings. on page 10). 2. Click on Wireless and click on Basic scroll down to Wireless Network Settings (2.4GHz or 5GHz) 3. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Radio On/Off Check the radio on/off button to enable/disable the wireless radio. Note: It is recommended to keep wireless radios enabled. New Schedule The schedule function allows you to define a schedule when the wireless should be turned on. To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. Wireless Mode: When applying the Wireless Mode setting, please keep in mind the following:
Wireless devices that support 802.11n are backwards compatible and can connect wirelessly at 802.11g or 802.11b. Wireless devices that support 802.11ac are backwards compatible and can connect wirelessly at 802.11n or 802.11a. Connecting at 802.11b or 802.11g will limit the capability of your 802.11n supported wireless devices from obtaining higher performance and data rates. Connecting at 802.11a or 802.11n will limit the capability of your 802.11ac supported wireless devices from obtaining higher performance and data rates. Wireless Network Name (SSID): Enter the wireless name (SSID) for your wireless network. This acronym stands for Service Set Identifier and is the name of your wireless network. It differentiates your wireless network from others around you. By default, the routers wireless name is unique to the device. If you choose to change the SSID, change it to a name that you can easily remember. Broadcast Network Name (SSID) o Enable - allows wireless devices to search and discover your wireless network name (also called SSID) broadcasted by your router. o Disable - Turns off the ability for wireless devices to find your network. It is still possible for wireless devices to be configured to connect to your wireless network. Disabling this setting will disable WPS functionality. Copyright 2016 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide TEW-827DRU Frequency (Channel) Selecting the AutoSelect option will set your router to scan for the appropriate wireless channel to use automatically. Click the drop-down list and select the desired Channel for wireless communication. The goal is to select the Channel that is least used by neighboring wireless networks. Channel Width: Select the appropriate channel width for your wireless network. This setting only applies to 802.11n and 802.11ac. For greater 802.11n performance, select Auto 20/40MHz (Options: 20MHz or Auto 20/40MHz). It is recommended to use the default channel bandwidth settings. For greater 802.11ac performance, select Auto 20/40/80MHz (Options: 20MHz, Auto 20/40MHz, Auto 20/40/80MHz). It is recommended to use the default channel width settings. Note: Please note that the default settings may provide more stability than the higher channel bandwidth settings such as Auto 20/40/80MHz for connectivity in busy wireless environments where there are several wireless networks in the area. o 20 MHz This mode operates using a single 20MHz channel for wireless devices connecting at 802.11n on both 2.4GHz and 5GHz. This setting may provide more stability than 20/40MHz (Auto) for connectivity in busy wireless environments where there are several neighboring wireless networks in the area. o Auto 20/40MHz (11n) or Auto 20/40/80MHz (11ac) When this setting is active, this mode is capable of providing higher performance only if the wireless devices support the channel width settings. Enabling Auto 20/40MHz or Auto 20/40/80 MHz typically results in substantial performance increases when connecting an 802.11ac/n wireless client. Copyright 2016 TRENDnet. All Rights Reserved. Guest Network Basic > Guest Network (2.4GHz or 5GHz) Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows wireless clients to connect to your network for Internet access only and keep your local LAN network safe by restricting guest access to your LAN network resources such as shared documents and media files on your computers, network storage, and printers. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic and click on Guest Network. 3. Review the Guest Zone settings. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Choose which band to enable the Guest Network (Wireless 2.4GHz or 5GHz):
Radio On/Off Check this option to enable the wireless guest network. New Schedule The schedule function allows you to define a schedule when the wireless guest network should be turned on. To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. Wireless Network Name (SSID) - This acronym stands for Service Set Identifier and is the name of your wireless network. It differentiates your wireless network from others around you. It is recommended to use a different name from your primary wireless network to a name that you can easily identify and differentiate from the primary. You can reference your guests to access this network instead of the primary. 13 TRENDnet Users Guide TEW-827DRU Internet Access Only When this option is checked, wireless client devices connected to your guest network(s) will be restricted from accessing your private LAN and wireless clients connected to your primary wireless network and allowed Internet access only. If unchecked, allows wireless client devices connected your guest network(s) complete access to your private LAN, primary wireless network, and Internet. Wireless Client Isolation When this option is checked, wireless client devices connected to your guest network(s) will be restricted from accessing other client devices connected to your guest network(s). 4. Under Security Mode, you can apply a different wireless security type and key to the guest network. Please refer to page 23 to find out about different security types and page 24 for wireless security configuration. Security Mode Select the wireless security to use for the guest network. Copyright 2016 TRENDnet. All Rights Reserved. 14 TEW-827DRU TRENDnet Users Guide Parental Control Basic > Parental Control Parental control settings allow you to set up restrictions/filters specifically who is allowed or denied access to your network for a specified period of time and restricted access to web content. Access Rule (MAC/IP Filter) Basic > Parental Control Every network device has a unique, 12-digit MAC (Media Access Control) address. Every network device must be assigned or configured with a specific IP address in order to communicate with your network which is typically assigned by your router DHCP server automatically. Using access rules, you can deny specific computers and other devices from using this routers wired or wireless network by specifying the MAC address or IP address. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic, click on Parental Control. 3. Check Enable to enable the access rule. 4. Enter a Computer Name. Note: If the network device is connected to your router, you can also click the drop-down list to choose one of the network devices (MAC Address/IP Address) detected by your router. Copyright 2016 TRENDnet. All Rights Reserved. 5. Select which Address Type to apply the filter. (MAC Address or IP Address) Note: If you device is not listed, please refer to your computer or device documentation to find the MAC address. 6. If the MAC or IP address was not copied by selecting the Host Name from the drop-
down list in Step 4, manually enter the MAC Address or IP Address in the field. Otherwise, move on to the next step. 7. Schedule (Optional) The schedule function allows you to define a schedule when the access should be allowed for the specified device MAC address or IP address. To define a new schedule, in the Schedule section, click Define and a table will appear to define the time slots when access is allowed for that specific device MAC or IP address. Note: Before defining a schedule, please ensure your Time settings are configured correctly. See page 42 to configure Time Settings. 15 TRENDnet Users Guide 8. To define the time slots to allow access and days, simply click on a box corresponding to the day and time slot allocated and the box will turn blue indicating that access has been allowed for that period on that day. For example: To allow access on Tuesdays and Wednesdays from 5AM to 6AM, click on those corresponding boxes. When finished setting the time slots allowed, click OK. 9. Click Save to add the rule to the table. 10. Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot. TEW-827DRU Note: In the Parental Control List, you can edit a rule by clicking column next to the rule you would like to edit. You can also delete a rule or specific rules by checking the box under the Delete column next to the rule(s) you would like to delete. Then click Delete those checked rules. If you would like to delete all rules, click Delete All. under the Edit Copyright 2016 TRENDnet. All Rights Reserved. 16 TRENDnet Users Guide Website Filter Basic > Parental Control You may want to block computers or devices on your network access to specific websites (e.g. www.xxxxxxxxx.com, etc.), also called domains or URLs (Uniform Resource Locators). You may also apply a schedule when these websites are allowed or denied. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic and click on Parental Control. 3. Under Website Filter, click the Website Filter drop-down list and choose one of the following options. TEW-827DRU 7. Schedule (Optional) The schedule function allows you to define a schedule when the access should be active and blocking the specified website. To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. 8. Click Add to add the access rule to the table. Note: Clicking Reset will discard your settings and clear all fields. Disable disables website filtering. DENY computers access to ONLY these sites: Only Deny computers/devices access to the listed websites and allow access to others. ALLOW computers access to ONLY these sites: Only Allow computers/devices access to the listed websites and deny access to others. 4. Check Enable to enable the access rule. 5. Enter a Rule Name. 6. Enter a URL (ex. www.xxxxxxxx.com) to apply for the filter or block Copyright 2016 TRENDnet. All Rights Reserved. Note: In the URL Fille List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking the Delete column next to the rule you would like to delete. under 9. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. 17 TRENDnet Users Guide Qualcomm StreamBoost Basic > Qualcomm StreamBoost > Bandwidth StreamBoost Traffic Shaping technology allows your router to automatically classify and identify each device and application and dynamically allocate the appropriate amount of Internet bandwidth required to for each application to run optimally. To enable StreamBoost under Bandwidth, check the Enable StreamBoost option and define your maximum upload and download speeds based on the service provided by your Internet Service Provider (ISP). You can also run an automatic Internet bandwidth test using online sites such as http://www.speedtest.net or you can contact your ISP to confirm the maximum bandwidth upstream and downstream limits of your Internet service. The StreamBoost feature enabled by default and values set to 1,000 Mbps to ensure you can take advantage of the automatic prioritization feature, however, for best results especially in bandwidth monitoring, it is strongly recommended to input the maximum downstream and upstream bandwidth to their accurate values by running an Internet speed test using online tools such as http://www.speedtest.net or contacting your ISP and requesting for the maximum bandwidth limits of your Internet service. Enable StreamBoost To enable StreamBoost (enabled by default):
1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic and click on Qualcomm StreamBoost. 3. In the Bandwidth page under the StreamBoost section, check the box to enable StreamBoost. Note: If available, enter the bandwidth limit values for downstream and upstream in Mbps from the online speed test or from your ISP. TEW-827DRU 4. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Note: It is an optional step to enable automatic StreamBoost updates and is not required for the StreamBoost feature and functionality. By enabling automatic StreamBoost updates, this will make sure that the StreamBoost feature on your router is able to accurately identify and classify the latest released network devices (tablets, mobile phones, computers, media players, etc.) and their running applications connected to your network in order to assign the most optimal amount of bandwidth. StreamBoost updates are downloaded directly from Qualcomm Atheros, Inc. To enable automatic StreamBoost updates, check the option Enable Automatic Update, and click Apply. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Copyright 2016 TRENDnet. All Rights Reserved. 18 TRENDnet Users Guide TEW-827DRU My Network Router Node View Basic > Qualcomm StreamBoost > My Network The My Network page provides a visual of your network by generating a network map of the devices connected to your router and the upstream and downstream bandwidth utilization. Click on the router icon to view an entire list of the devices connected to your router or click on any of the connected devices to view more details of the bandwidth utilization per application of each device. The arrows display the downstream and upstream bandwidth for each device including router and Internet. You can also click the Show drop down menu to display all Active Devices (default) or All Devices (includes inactive devices). The Router Node View page displays each device and their bandwidth usage, you can click each device to display a list of the active applications used by the device(s) and the per application bandwidth usage. The top bar next to each device is the upstream bandwidth and the lower bar is the downstream bandwidth. The graphs below will display the bandwidth utilization of the devices within one minute. The blue area displays the bandwidth usage of the selected device in the list. The white areas are the bandwidth utilizations of other devices. Copyright 2016 TRENDnet. All Rights Reserved. 19 TRENDnet Users Guide Device Node View The Router Node View page displays each device and their bandwidth usage, you can click each device to display a list of the active applications used by the device(s) and the per application bandwidth usage. The top bar next to each application is the upstream bandwidth and the lower bar is the downstream bandwidth. The graphs below will display the bandwidth utilization per application within one minute. TEW-827DRU The color icons next to each application indicate one of the following:
Color Status Description GREEN Optimal YELLOW Good ORANGE Oversubscription RED Too little bandwidth Bandwidth is allocated so that the application performs at the optimal level. Bandwidth is allocated so that the application performs at an acceptable level, but uses less bandwidth than the optimal settings. This application cannot meet its minimum bandwidth requirements and is placed in a best effort category to compete for the remaining bandwidth available. This application is receiving a very small amount of it bandwidth requirement at optimal settings. Copyright 2016 TRENDnet. All Rights Reserved. 20 TRENDnet Users Guide Priorities Usage by Time Basic > Qualcomm StreamBoost > Priorities Basic > Qualcomm StreamBoost > Usage by Time TEW-827DRU The Priorities page will allow you to change the importance of devices. This may be useful when devices are competing for lower limited bandwidth values however, this is optional as StreamBoost automatically assigns the device priority. Click the up or down arrows next to each device to change the priority position, one being the highest priority. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Copyright 2016 TRENDnet. All Rights Reserved. The usage by time chart will display the top 5 applications recently used based on bandwidth utilization. You can click the drop-down list to select a specific device and select to view the most recent day, month, or year. 21 TRENDnet Users Guide Usage by Data TEW-827DRU Basic > Qualcomm StreamBoost > Usage by Data The usage by data chart will display the top applications recently used based on bandwidth utilization. The chart will display the average amount of data used by each application and average percentage of total available Internet bandwidth each application utilitizes. Copyright 2016 TRENDnet. All Rights Reserved. 22 TRENDnet Users Guide Wireless Networking and Security How to choose the type of security for your wireless network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router. There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware). It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.). In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network. Wireless Encryption Types WEP: Legacy encryption method supported by older 802.11b/g hardware. This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b or 802.11g wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. Note: This encryption standard will limit connection speeds to 54Mbps. WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. WPA-Auto: This setting provides the router with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. Copyright 2016 TRENDnet. All Rights Reserved. TEW-827DRU Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps WPA2: This is the most secure wireless encryption available today, similar to WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your router to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your router to either WPA or WPA-Auto encryption. Note: Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported. Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. Security Standard WEP WPA WPA2 IEEE 802.11a/b/g
(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g
(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g/n/ac Up to 54Mbps Up to 54Mbps Up to 800Mbps (11n) or 1.7 Gbps (11ac) Low Open System or Shared Key, HEX or ASCII, Different key sizes Medium High TKIP or AES, Preshared Key or RADIUS TKIP or AES, Preshared Key or RADIUS TKIP Preshared Key 8-63 characters AES Preshared Key 8-63 characters Recommended Configuration Open System ASCII 13 characters
*Dependent on the maximum 802.11n data rate supported by the device (150Mbps, 300Mbps, 450Mbps, 600Mbps, 800Mbps) or maximum 802.11ac data rate supported by the device (433Mbps, 867Mbps, 1.3Gbps, 1.7Gbps) 23 Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Selecting WEP:
TEW-827DRU TRENDnet Users Guide Secure your wireless network Basic > Wireless After you have determined which security type to use for your wireless network (see How to choose the security type for your wireless network on page 23), you can set up wireless security. Note: By default, your router is configured with a predefined wireless network name
(SSID) and security key using WPA2-Personal. The predefined wireless network name and security can be found on the sticker on the side of the router or on the device label at the bottom of the router. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Basic, and click on Wireless. 3. Under Security, click on the Security Mode drop-down list to select your wireless security type. If selecting WEP (Wired Equivalent Privacy), please review the WEP settings. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Security Mode: Choose WEP-OPEN, WEP-SHARED, or WEP-AUTO. Note: It is recommended to use Open since it is known to be more secure than Shared Key. Default Key: Choose the key index to use for security to the corresponding WEP Keys 1-4. You can only use one key at any given time. Note: Please note that they wireless client key index 1-4 should also match the key index chosen here in order to establish connection. WEP Key 1-4: Enter the WEP key. This is the password or key that is used to connect your computer to this router wirelessly. You can enter 64-bit or 128-bit key. You can enter up to four keys but only the one chosen as the Default Key will be used. Note: It is recommended to use 128-bit because it is more secure to use a key that consists of more characters. Hex/ASCII: Enter the WEP key format. See the table below for the acceptable characters and lengths for each format. WEP Key Format HEX ASCII Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.) 64-bit key length 10 characters 5 characters 128-bit key length 26 characters 13 characters Copyright 2016 TRENDnet. All Rights Reserved. 24 TRENDnet Users Guide Selecting WPA-PSK / WPA2-PSK/ WPA2-PSK Mixed
(WPA2-Personal recommended):
Selecting WPA / WPA2 / WPA2-Enterprise Mixed
(WPA2-Personal recommended):
In the Security Mode drop-down list, select WPA-PSK, WPA2-PSK, or WPA2-PSK Mixed. Please review the WPA-Personal settings.To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. TEW-827DRU The following section outlines options when selecting WPA-Personal, WPA2-Personal, or WPA2-Personal Mixed (Preshared Key), WPA Cipher: Select a Cipher Type to use. o When selecting WPA2-Personal Mixed security, it is recommended to use TKIP/AES. o When selecting WPA2-Personal security, it is recommended to use AES. WPA Pre-Shared Key: Enter the passphrase. o This is the password or key that is used to connect your computer to this router wirelessly Key Format: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) Key Update Interval: Enter the time interval (seconds) of when the network passphrase will rotate. Note: It is recommended to use the default interval time. Your passphrase will not change, rotation of the key is part of the WPA protocol and designed to increase security. The following section outlines options when selecting WPA, WPA2-Enterprise, or WPA2-Enterprise Mixed (EAP or RADIUS). This security type is also known as EAP
(Extensible Authentication Protocol) or Remote Authentication Dial-In User Service or RADIUS. Note: This security type requires an external RADIUS server, Pre-Shared Key only requires you to create a passphrase. WPA Cipher: Select a Cipher Type to use. o When selecting WPA2-Personal Mixed security, it is recommended to use TKIP/AES. o When selecting WPA2-Personal security, it is recommended to use AES. Key Update Interval: Enter the time interval (seconds) of when the network passphrase will rotate. Note: It is recommended to use the default interval time. Your passphrase will not change, rotation of the key is part of the WPA protocol and designed to increase security. IP Address: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250) Port: Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812 which is typical default RADIUS port. Shared Secret: Enter the shared secret used to authorize your router with your RADIUS server. Copyright 2016 TRENDnet. All Rights Reserved. 25 TRENDnet Users Guide Connect wireless devices to your router A variety of wireless network devices can connect to your wireless network such as:
Gaming Consoles Internet enabled TVs Network media players Smart Phones Wireless Laptop computers Wireless IP cameras Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the Users Manual/Guide of your wireless client device to determine how to search and connect to this routers wireless network. You can view the currently connected wireless client devices under Advanced > Wireless
(2.4GHz or 5GHz) > Station List in the router management page. See the Appendix on page 73 for general information on connecting to a wireless network. Connect wireless devices using WPS TEW-827DRU WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or if you are using WEP security. There are two methods the WPS feature can easily connect your wireless devices to your network. Push Button Configuration (PBC) method o (RECOMMENDED) Hardware Push Button methodwith an external button located physically on your router and on your client device o WPS Software/Virtual Push Button - located in router management page PIN (Personal Identification Number) Method - located in router management page Note: Refer to your wireless device documentation for details on the operation of WPS. Recommended Hardware Push Button (PBC) Method Note: It is recommended that a wireless key (passphrase or password) is created before connecting clients using the PBC method. By default your router is preconfigured with a wireless encryption key. If no wireless key is defined when connecting via PBC, the router will automatically create an encryption key that is 64 characters long. This 64 character key will then have to be used if one has to connect computers to the router using the traditional connection method. To add a wireless device to your network, simply push the WPS button on the wireless device you are connecting (consult client device Users Guide for length of time), then push and hold the WPS button located on your router for 3 seconds and release it. The WPS LED will blink to indicate WPS has been activated on your router. (See Product Hardware Features on page 2) For connecting additional WPS supported devices, repeat this process for each additional device. Copyright 2016 TRENDnet. All Rights Reserved. 26 TRENDnet Users Guide PBC (Software/Virtual Push Button) Advanced > Wireless (2.4GHz or 5GHz) > WPS PIN (Personal Identification Number) Advanced > Wireless (2.4GHz or 5GHz) > WPS TEW-827DRU In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router. If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless device product label or located in the wireless device wireless software utility), you can use this method. 1. Log into your router management page (see Access your router management page 1. Log into your router management page (see Access your router management page on page 10). on page 10). 2. Click on Advanced, then click on Wireless (2.4GHz or 5GHz), and click on WPS. 2. Click on Wireless, and click on Wi-Fi Protected Setup. 3. To add a wireless device to your network, next to PBC, click the Start Push Button button in the router management page. Then push the WPS button on the wireless device (consult wireless devices Users Guide for length of time) you are connecting. 3. To add a wireless device to your network, next to Client, enter the 8-digit numeric PIN number of the wireless client device and click Start PIN. Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS. 4. Wait for your router to finsh the WPS process. Note: You should a message on your WPS client device indicating WPS was successful. 4. Wait for your router to finsh the WPS process. Note: You should a message on your WPS client device indicating WPS was successful. Copyright 2016 TRENDnet. All Rights Reserved. 27 TRENDnet Users Guide Advanced wireless settings The advanced wireless features provide can provide you with additional options for setting up your wireless network such as multiple SSID and WDS (Wireless Distribution System) or wireless bridging. Multiple SSID To configure multiple SSID on your router:
TEW-827DRU 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on Multiple SSID. Advanced > Wireless (2.4GHz or 5GHz) > Multiple SSID The multiple SSID feature allows you to broadcast up to 3 SSIDs (or wireless network names). When wireless devices are searching for available wireless networks to connect to, the SSIDs (or wireless network names) will appear as separate and different wireless networks. Since they appear as separate wireless networks, they are also referred to as virtual APs (Access Points) since they appear as separate wireless access points but are actually all being broadcasting and managed by a single wireless access point. Each virtual AP can be configured each with a different SSID (or wireless network name), security type and additional settings for wireless devices to connect. You can use the multiple SSID feature to setup guest wireless accounts with a different security type to keep your primary wireless network security information private. The diagram shows an example of a client connecting to SSID 1 and another client connecting to SSID 2. By default, your router functions in Access Point mode to allow wireless client devices to connect and access your network resources and access the Internet using a single SSID. The diagram below shows your router in Access Point mode and clients connecting to your router using a single SSID. 3. Next to Multiple SSID1 or SSID2, check Radio On/Off option to enable the additional SSID. New Schedule The schedule function allows you to define a schedule when the additional SSID should be turned on. To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. 4. Wireless Name (SSID): Enter the wireless name (SSID) for additional SSID. This acronym stands for Service Set Identifier and is the name of your wireless network. It differentiates your wireless network from others around you. By default, the routers wireless name is unique to the device. It is recommended to change it to a name different from the primary SSID 1 and one that you can easily remember. Copyright 2016 TRENDnet. All Rights Reserved. 28 TRENDnet Users Guide Please refer to page 23 to find out about different security types and page 24 for wireless security configuration. The diagram shows an example of a client connecting to SSID 1 and another client connecting to SSID 2. 5. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Note: You can repeat the steps to enable and configure additional SSIDs. Copyright 2016 TRENDnet. All Rights Reserved. Wireless bridging using WDS (Wireless Distribution System) Advanced > Wireless (2.4GHz or 5GHz) > WDS TEW-827DRU Wireless bridging using WDS allows the device to create a wireless bridge with other WDS supported wireless routers and access points configured in WDS mode to bridge groups of network devices together wirelessly. Simultaneously, the router will also function in access point mode allowing wireless client devices such as computers, game consoles, mobile phones, etc. to connect in order to access network resources from multiple groups of network devices as well as the Internet. Note: You can create up to four WDS bridge connections on each wireless band (2.4GHz and 5GHz. WDS (Wireless Distribution System) is not currently standardized and may not connect to different model wireless routers or access points, therefore, when using WDS, it is recommended to use the same model and version for wireless bridging. By default, your router functions in Access Point mode to allow wireless client devices to connect and access your network resources and access the Internet. The diagram below shows your router in Access Point mode and clients connecting to your router. 29 TRENDnet Users Guide Note: Before configuring WDS, please ensure the following first:
4. Under Security, configure the encryption type to use. TEW-827DRU 1. Make sure different IP addresses are assigned to each WDS supported wireless device used for bridging. (ex. 192.168.10.1,192.168.10.2, 192.168.10.3) to avoid IP address conflict. See page 37 for changing the LAN IP address. 2. If you are using more than one WDS supported router, please make sure the LAN DHCP server is enabled on only one and disabled on all others to avoid IP address conflict. See page 38 for DHCP server options. 3. Configure the same wireless channel and use the same on all WDS supported wireless devices. See page 12 for configuring basic wireless settings. 4. Configure the same wireless security and key on all WDS supported devices. See page 24 for configuring wireless security settings. Note: Only WEP security is supported for WDS. You can find more information on wireless security on page 23. 5. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. For additional routers, make sure to disable the DHCP server first on all additional routers and configure the LAN IP address to be different on each router. You will connect devices to the LAN ports 1-4 only on all additional routers and the WAN port is not used. Then, repeat the steps for additional routers you are bridging. To configure WDS bridging between TEW-827DRU routers:
1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on WDS. 3. Click the WDS drop-down menu and select Enable. Note: Please note to use the Local AP MAC address listed here to enter into the other WDS capable routers WDS configuration, not the MAC listed in the Router Status page. 4. Next to Wireless Distribution System (WDS), in an empty field, enter the MAC address of the other WDS supported wireless device you are bridging. (e.g. 00:11:22:AA:BB:CC) In the diagram below, the blue color represents the WDS wireless bridged connections between the routers. The green color represents access point mode connections between wireless client devices and the routers. Copyright 2016 TRENDnet. All Rights Reserved. 30 TRENDnet Users Guide Wireless Client Bridge Mode Advanced > Setup > Device Mode 5. Select the network you would like to connect to in the list by clicking on the wireless network name or SSID. TEW-827DRU Wireless client bridge mode The function of client bridge mode is to extend wireless connectivity to multiple wired Ethernet client devices. A typical application where this mode may be used is in your home entertainment/media center where multiple network enabled media devices require Internet or network connectivity such as an HD smart TV, game console, set top box, or DVR. The device will first establish connectivity
(similar to a wireless enabled client device such as a laptop or mobile phone) to your wireless network (typically provided by a wireless router or access point) and bridge the connectivity to your network over to the wired client devices using the four LAN switch ports (1-4). After selecting and applying this mode, click on Wireless > Wireless Network and click Site Survey to scan for the wireless network to connect and enter the wireless security key (if required) to establish connectivity to your network. After you have successfully set up the device to connect to your wireless network, you can plug in the device in the area where you would like to bridge network connectivity to wired client devices using the four LAN switch ports (1-4). In this mode, the device can only connect to one band at a time (2.4GHz or 5GHz) and will not provide any of the access control features typically provided in router mode. To configure your TEW-827DRU in client bridge mode:
1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click Setup, then click on Device Mode. 3. Select Client Bridge and click Apply & Reboot. 4. Click on Wireless and click on Wireless Network, then click on Site Survey to scan for available wireless networks. Copyright 2016 TRENDnet. All Rights Reserved. 6. If the network selected requires a WiFi password/key, enter the key under Wireless Security. Note: You can choose to enable MU-MIMO if the router/AP you are connecting to supports this feature. 7. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. After applying changes, you can check the connection status under Status >
Connection Status. 31 TEW-827DRU preamble 192 microseconds. However, using a short preamble is not supported using 802.11b legacy devices, in some cases cause wireless interoperability issues, and increase the error rate in some installations. The preamble is the info. sent from the wireless transmitter to the receiver indicating when data is incoming. Short Slot: Short Slot Override defines the amount of time a device waits after a data frame collision before retransmitting the data. Reducing the time from 20 microseconds (standard) to 9 microseconds can potentially increase throughput however, can also increase the error rate. 20/40 Coexistence (2.4GHz only): 20/40 MHz Coexistence allows for the auto-
fallback from 40MHz to 20MHz channel width operation when neighboring 802.11 wireless networks are detected. Guard Interval: Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. MCS Allows you to lock down the wireless transmission rate. Extension channel Allows you to assign either the upper or lower extension channels to use for channel bonding when establishing connectivity at the higher channel widths 40MHz and 80MHz. A-MPDU: Using Aggregate Multiple Protocol Data Unit will allow the all frames transmitted to be aggregated into larger size A-MPDU formatted frames before sending and receiving potentially increasing the overall throughput. MU-MIMO (5GHz only): Enables MU-MIMO functionality on your router to optimize downstream bandwidth for multiple concurrent wireless clients. Please note that wireless clients must also support MU-MIMO capability to utilize the functionality. TRENDnet Users Guide Advanced Settings Advanced > Wireless (2.4GHz or 5GHz) > Advanced These settings are advanced options that can be configured to change advanced wireless broadcast specifications. It is recommended that these settings remain set to their default values unless you are knowledgeable about the effects of changing these values. Changing these settings incorrectly can degrade performance. Beacon Period: A beacon is a management frame used in wireless networks that transmitted periodically to announce the presence and provide information about the routers wireless network. The interval is the amount time between each beacon transmission. Default Value: 100 milliseconds (range: 100-1000) DTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. Fragment Threshold: Wireless frames can be divided into smaller units
(fragments) to improve performance in the presence of RF interference and at the limits of RF coverage. Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold. This setting should remain at its default value of 2346 bytes. Setting the Fragmentation value too low may result in poor performance. RTS Threshold: The Request To Send (RTS) function is part of the networking protocol. A wireless device that needs to send data will send a RTS before sending the data in question. The destination wireless device will send a response called Clear to Send (CTS). The RTS Threshold defines the smallest data packet size allowed to initiate the RTS/CTS function. Default Value: 2347 (range: 1-2347) TX Power: This setting allows you to adjust the wireless transmit power to a lower setting. In busy wireless environments, lowering the transmit power may improve better performance and connectivity and decrease interference with neighboring wireless networks. Short Preamble: Using a short preamble can potentially increase throughput as the transfer time is 96 microseconds versus the more commonly used long Copyright 2016 TRENDnet. All Rights Reserved. 32 TRENDnet Users Guide TEW-827DRU Copyright 2016 TRENDnet. All Rights Reserved. 33 TEW-827DRU 4. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors. If possible, upgrade wireless network interfaces (such as wireless cards in computers) from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device uses an older standard, the performance of the entire wireless network may be slower. If you are still experiencing low or no signal consider repositioning the wireless devices, installing additional access points or wireless extenders. TRENDnet Users Guide Steps to improve wireless connectivity There are a number of factors that can impact the range of wireless devices. Follow these tips to help improve your wireless connectivity:
1. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. a. For the widest coverage area, install your router near the center of your home, and near the ceiling, if possible. b. Avoid placing the router on or near metal objects (such as file cabinets and metal furniture), reflective surfaces (such as glass or mirrors), and masonry walls. c. Any obstruction can weaken the wireless signal (even non-metallic objects), so the fewer obstructions between the router and the wireless device, the better. d. Place the router in a location away from other electronics, motors, and fluorescent lighting. e. Many environmental variables can affect the routers performance, so if your wireless signal is weak, place the router in several locations and test the signal strength to determine the ideal position. 2. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. 3. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapters site survey tool to determine the best antenna orientation for your wireless devices. Copyright 2016 TRENDnet. All Rights Reserved. 34 TRENDnet Users Guide Advanced Router Settings Change your router login password Advanced > Setup > Management 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on Management. 3. Under the Administrator Settings section, in the Password field. Note: The idle timeout setting is used to define the period of inactivity in the router management page before automatically logging out. Manually configure your Internet connection Advanced > Setup > WAN Settings TEW-827DRU 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on WAN Settings. 3. Under Internet Connection Type in drop-down list, select the type of Internet connection provided by your Internet Service Provider (ISP). 4. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot. Note: If you change the router login password, you will need to access the router management page using the User Name admin and the new password instead of the predefined default password. If you reset the device to defaults, you will need to access the router management page use the predefined settings on the side or bottom labels. 4. Complete the fields required by your ISP. 5. Complete the optional settings only if required by your ISP. 6. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Note: If you are unsure which Internet connection type you are using, please contact your ISP. Copyright 2016 TRENDnet. All Rights Reserved. 35 TEW-827DRU TRENDnet Users Guide IPv6 Settings Advanced > Setup > IPv6 Settings IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the number of available Internet public IP addresses due to the 128-bit IP address structure versus IPv4 32-bit address structure. In addition, there are several integrated enhancements compared to the most commonly used and well known IPv4 (Internet Protocol Version 4) such as:
Integrated IPsec Better Security Integrated Quality of Service (QoS) Lower latency for real-time applications Higher Efficiency of Routing Less transmission overhead and smaller routing tables Easier configuration of addressing Note: In order to use IPv6 Internet connection settings, it is required that your ISP provide you with the IPv6 service. Please contact your ISP for availability and more information about the IPv6 service. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on IPv6 Settings. 3. Review the IPv6 Internet Connection settings and enter information settings specified by your ISP. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Note: Please contact your ISP for IPv6 service availability. Select the IPv6 connection type provided by your ISP. Static IPv6 Auto-configuration (SLAAC/DHCPv6) PPPoE 6to4 Link-Local Only Copyright 2016 TRENDnet. All Rights Reserved. 36 TEW-827DRU TRENDnet Users Guide Clone a MAC address Advanced > Setup > WAN Settings On any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem. If your computer MAC address is already registered with your ISP and to prevent the re-provisioning and registration process of a new MAC address with your ISP, then you can clone the address (assign the registered MAC address of your previous device to your new router). If you want to use the MAC address from the previous device (computer or old router that directly connected to the modem, you should first determine the MAC address of the device or computer and manually enter it into your router using the clone MAC address feature. Note: For many ISPs that provide dynamic IP addresses automatically, typically, the stored MAC address in the modem is reset each time you restart the modem. If you are installing this router for the first time, turn your modem before connecting the router to your modem. To clear your modem stored MAC address, typically the procedure is to disconnect power from the modem for approximately one minute, then reconnect the power. For more details on this procedure, refer to your modems User Guide/Manual or contact your ISP. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on WAN Settings. 3. In the MAC Address Clone section, click Clone Your PCs MAC Address to copy your computers MAC address in the MAC Address field. Note: You can also check the DHCP Client List for the MAC addresses of the devices on your network, see page 38 or refer to your computer or device documentation to find the MAC address. Change your router IP address Advanced > Setup > LAN Settings In most cases, you do not need to change your router IP address settings. Typically, the router IP address settings only needs to be changed, if you plan to use another router in your network with the same IP address settings, if you are connecting your router to an existing network that is already using the IP address settings your router is using, or if you are experiencing problems establishing VPN connections to your office network through your router. Note: If you are not encountering any issues or are not faced with one of the cases described above or similar, it is recommended to keep your router IP address settings as default. Default Router IP Address: 192.168.10.1 Default Router Network: 192.168.10.0 / 255.255.255.0 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on LAN Settings. 3. In LAN Interface Setting section, Enter the router IP address settings. IP Address: Enter the new router IP address. (e.g. 192.168.200.1) Subnet Mask: Enter the new router subnet mask. (e.g. 255.255.255.0) Note: The DHCP address range will change automatically to your new router IP address settings so you do not have to change the DHCP address range manually to match your new router IP address settings. 4. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Copyright 2016 TRENDnet. All Rights Reserved. 4. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot. Note: You will need to access your router management page using your new router IP address. (e.g. Instead of using the default http://192.168.10.1 your new router IP address will use the following format using your new IP address http://(new.ipaddress.here) to access your router management page. You can also use the default login URL http://tew-827dru 37 TRENDnet Users Guide Set up the DHCP server on your router Advanced > Setup > LAN Settings Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to automatically assign an IP address to each computer or device on your network. The DHCP server is enabled by default on your router. If you already have a DHCP server on your network, or if you do not want to use your router as a DHCP server, you can disable this setting. It is recommended to leave this setting enabled. TEW-827DRU 1. Log into your router management page (see Access your router management page on page 10). You can also view the current DHCP clients in the Number of Dynamic DHCP Clients list under Advanced > Setup > DHCP Client List. 2. Click on Advanced and click on Setup, then click on LAN Settings. 3. Review the DHCP Server settings. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. DHCP Server: Enable or Disable the DHCP server. DHCP Start IP: Changes the starting address for the DHCP server range.
(e.g. 192.168.10.20) DHCP End IP: Changes the ending address for the DHCP server range.
(e.g. 192.168.10.30) Note: The Start IP and End IP specify the range of IP addresses to automatically assign to computers or devices on your network. DHCP Lease Time Enter the DHCP lease time in minutes. Note: The DHCP lease time is the amount of time a computer or device can keep an IP address assigned by the DHCP server. When the lease time expires, the computer or device will renew the IP address lease with the DHCP server, otherwise, if there is no attempt to renew the lease, the DHCP server will reallocate the IP address to be assigned to another computer or device. Copyright 2016 TRENDnet. All Rights Reserved. 38 TRENDnet Users Guide Set up DHCP reservation Advanced > Setup > LAN Settings DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows your router to assign a fixed IP address from the DHCP server IP address range to a specific device on your network. Assigning a fixed IP address can allow you to easily keep track of the IP addresses used on your network by your computers or devices for future reference or configuration such as virtual server (also called port forwarding, see Virtual Server on page 46) or special applications (also called port triggering, see Special Applications on page 48). 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on LAN Settings. 3. Review the DHCP reservation settings. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Enable Enable or Disable the DHCP reservation. Computer Name Enter a name of the device you will assign the DHCP reservation. Note: You can click the Computer Name drop-down list to select from an available computer in the DHCP server listing, click >> to copy the computers host name/IP address information into the fields. IP Address Enter the IP address to assign to the reservation. (e.g. 192.168.10.101) Note: You can click the Computer Name drop-down list to select from an available computer in the DHCP server listing, click >> to copy the computers host name/IP address information into the fields. MAC Address Enter the MAC (Media Access Control) address of the computer or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC) Note: You can click Clone your PCs MAC Address to copy the current computers MAC address into the MAC address field. Copy your PCs MAC To copy your current computers MAC address to the field, you can click Copy. Copyright 2016 TRENDnet. All Rights Reserved. TEW-827DRU Click Add - Saves the reservation. Note: Click Clear discards and erases the current information. You will see the new reservation added to the DHCP Reservations Ready Group. This is a temporary list until you save changes by clicking Apply. You can continue to add more DHCP reservation entries which will appear in this list. Once you have saved the settings, the entries will appear under the DHCP Reservations list. You can click Reset to clear the entries in the list or check the Delete option, next to the entry to remove and click Delete. Under the DHCP Reservations List, You can click the entry to remove and click Delete Selected to delete the reservation. You can also click Delete All to delete all DHCP reservation entries from the list. icon to edit the reservation or check the Delete option next to the To save changes when modifying a reservation, click Save. Note: If you would like to discard the changes, click Clear. 39 TRENDnet Users Guide Enable/disable UPnP on your router Advanced > Administrator > Advanced Network UPnP (Universal Plug and Play) allows devices connected to a network to discover each other and automatically open the connections or services for specific applications (e.g. instant messenger, online gaming applications, etc.) UPnP is enabled on your router by default to allow specific applications required by your computers or devices to allow connections through your router as they are needed. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click Advanced Network. 3. Under the UPnP section , check the option to enable UPnP or uncheck to disable UPnP. Note: It is recommended to leave this setting enabled, otherwise, you may encounter issues with applications that utilize UPnP in order allow the required communication between your computers or devices and the Internet. 4. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot. TEW-827DRU Enable/disable Application Layer Gateways (ALG) Advanced > Firewall > ALG You may want to configure your router to allow computers the use of specific high layer applications or service sessions to pass through. Application Layer Gateways (ALG) allows you to easily enable or disable these applications to pass through your router. Note: It is recommended to leave these settings enabled. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Firewall, then click on ALG. 3. Review the applications to enable or disable. Click Apply to save the changes. Streaming Media (RTSP): Allows RTSP protocol through your router typically used in streaming media applications. Streaming Media-VoIP (SIP): Allows SIP protocol through your router typically used in VoIP applications Streaming Media-VoIP (H.323): Allows H.323 protocol through your router typically used in video/audio conferencing applications. File Transfer (FTP): Allows FTP protocol through your router used for file transfer over a network or the Internet. File Transfer (TFTP): Allows TFTP protocol through your router used for file transfer over a network or the Internet. VPN IPsec (VPN): Allows IPsec VPN client connections through your router. 5. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Copyright 2016 TRENDnet. All Rights Reserved. 40 TRENDnet Users Guide Allow/deny multicast streaming Advanced > Wireless (2.4GHz or 5GHz) Identify your network on the Internet Advanced > Setup > Management TEW-827DRU In some cases, applications require multicast communication (also called IP multicast which is the delivery of information to a specific group of computers or devices in a single transmission) typically used in media streaming applications. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then and click on Advanced. Since most ISPs constantly change your home IP address, providing access to devices on your home or small office Local Area Network (such as IP Cameras) from the Internet requires setting up a Dynamic DNS service and entering the parameters into this management area. Dynamic DNS services allow your router to confirm its location to the given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability to provide a virtual fixed IP address for your network. This means that even though your ISP is always changing your IP address, the Dynamic DNS service will be able to identify your network using a fixed addressone that can be used to view home IP Camera and other devices on your local area network. Note: First, you will need to sign up for one of the DDNS service providers listed in the Server Address drop-down list. 3. Next to Multicast-to-Unicast Converter, select the option to enable or disable. 4. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. 1. Sign up for one of the DDNS available service providers list under Server Address.
(e.g. no-ip.com, etc.) 2. Log into your router management page (see Access your router management page on page 10). 3. Click on Advanced and click on Setup, then click on Management. 4. Review the DDNS Settings section. Click Save Settings to save settings. Dynamic DNS Provider Server: Click the drop-down list Select your DDNS service. Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz) Account: The user name needed to log in to your Dynamic DNS service account Password: This is the password to gain access to Dynamic DNS service for which you have signed up to. (NOT your router or wireless network password) 5. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Copyright 2016 TRENDnet. All Rights Reserved. 41 TRENDnet Users Guide Set your router date and time Advanced > Administrator > Time 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click Time. 3. Review the Time settings. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot. TEW-827DRU You can choose one of the following options to set the device time and date:
Automatically synchronize with Internet Time Server Check the Enable NTP Server option to set your router date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server address next to Default NTP server, (e.g. pool.ntp.org). Click the Time Zone drop-
down list to select the appropriate zone and you can optionally change your NTP Sync period. Note: NTP servers are used for computers and other network devices to synchronize time across an entire network. Time: Displays the current device time and date information. Enable Daylight Saving: Check the option to enable daylight savings time and set the annual range when daylight saving is activated. Copyright 2016 TRENDnet. All Rights Reserved. Manually set time Set your router date and time manually in the Date and Time Settings section. Note: Time is specified in 24-hour format. In addition, you can click Synchronize with Your Computers Time Settings to copy the time and date settings from your computer. 42 TRENDnet Users Guide Create schedules Advanced > Setup > Schedule 3. Review the Schedule settings. To save changes to this section, click Add when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. TEW-827DRU Rule Name: Enter a name for the schedule you would like to apply. Day(s)/Select Day(s): Check Select Day(s) to select the days in the Select Day(s) section or select All Week to set the schedule for all days. All Day 24 Hours Check the option to set the schedule to 24 hours or define the schedule under Start Time and End Time. Start/End Time: Select the start and end time you would like the schedule to follow. Note: The schedule defined will define the time/day the feature will be activated. For additional security control, your router allows you to create schedules to specify a time period when a feature on your router should be activated and deactivated. Before you use the scheduling feature on your router, ensure that your router system time is configured correctly. Note: You can apply a predefined schedule to the following features:
Wireless (2.4GHz and 5GHz) Guest Network Parental Control (Web URL Filters) Access Control (IP Protocol Filters) Virtual Server Special Applications Gaming 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on Schedule. Copyright 2016 TRENDnet. All Rights Reserved. 43 TRENDnet Users Guide Access Control (IP Protocol Filter) Advanced > Security > Access Control You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet. Block a specific service or multiple services 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Security, then click on Access Control. TEW-827DRU Client IP Address Range Enter the IP address or IP address range to apply the protocol/IP filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-
192.168.10.30). Note: The filter will not be applied to IP addresses outside of the range specified. 3. Next to Enable Access Control, click the Enable option. 4. Review the Add Services Block Rule. Click Add to save the rule. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Rule Enable Checking this option turns on the Protocol/IP Filter and unchecking turns it off. Rule Name Enter a name for the Protocol/IP Filter. Schedule (Optional) The schedule function allows you to define a schedule when the access control filter should be turned on. T To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. Copyright 2016 TRENDnet. All Rights Reserved. To simplify configuration, there is a list of commonly used pre-defined Protocol/IP Filters to modify otherwise, you can choose to manually add a new Protocol/IP Filter. Service Select Predefined to select from the predefined services listed or select Manually to specifically enter the TCP or UDP port number or port range numbers to block. (e.g. 80-80 or 20-21). 44 TRENDnet Users Guide Block all services 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Security, then click on Access Control. 3. Next to Enable Access Control, click the Enable option. TEW-827DRU Inbound Filter Advanced > Security > Inbound Filter Inbound Filters allows you to allow or deny a specific range of IP addresses. You can create a predefined range of IP addresses to apply to a specific feature. Note: You can apply a predefined inbound filter to the following features:
Virtual Server Gaming Remote Management 4. Review the Add All Services Block Rule. Click Add to save the rule. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Rule Enable Checking this option turns on the Protocol/IP Filter and unchecking turns it off. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Access, and click on Inbound Filter. 3. Review the inbound filter settings. Click Add to save the Inbound Filter. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Rule Name Enter a name for the Protocol/IP Filter. Schedule (Optional) The schedule function allows you to define a schedule when the access control filter should be turned on. To define a new schedule, click New Schedule and refer to page 43 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 42 to configure Time Settings and see page 43 Create Schedules to create a schedule. Client IP Address Range Enter the IP address or IP address range to apply the protocol/IP filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-
192.168.10.30). Note: The filter will not be applied to IP addresses outside of the range specified. Filter Name Enter a name for the IP address range. Filter Action Select Allow to allow the specified IP address range or Deny to deny the specified IP address range. IP Address - Enter the IP address (e.g. 192.168.1.20-192.168.1.30). Note: In the Block Rule List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking the Delete column next to the rule you would like to delete. under Note: In the Inbound Filter List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking under the Delete column next to the rule you would like to delete. Copyright 2016 TRENDnet. All Rights Reserved. 45 TRENDnet Users Guide Open a device on your network to the Internet This router can provide access to devices on your local area network to the Internet using the Virtual Server, Special Application, method (DMZ NOT recommended). DMZ Advanced > Firewall > DMZ You may want to expose a specific computer or device on your network to the Internet to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature that makes all the ports and services available on the WAN/Internet side of the router and forwards them to a single IP address (computer or network device) on your network. The DMZ feature is an easy way of allowing access from the Internet however, it is a very insecure technology and will open local area network to greater threats from Internet attacks. It is strongly recommended to use Virtual Server (also called port forwarding, see Virtual Server on page 46) to allow access to your computers or network devices from the Internet. Virtual Server Advanced > Firewall > Virtual Server TEW-827DRU Virtual Server (also called port forwarding) allows you to define specific ports (used or required by a specific application) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ
(see DMZ on page 42) in which DMZ forwards all ports instead of only specific ports used by an application. An example would be forwarding a port to an IP camera
(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on your network to be able to view it over the Internet. To open several ports please refer to Gaming section on page 45. Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service
(outlined in Identify Your Network section page 37). 1. Log into your router management page (see Access your router management page on page 10). 1. Make the computer or network device (for which you are establishing a DMZ link) has 2. Click on Advanced and click on Firewall, then click on Virtual Server. a static IP address. Signing up for a Dynamic DNS service (outlined in Identify Your Network section page 37) will provide identification of the routers network from the Internet. 2. Log into your router management page (see Access your router management page on page 10). 3. Click on Advanced and click Firewall, then click on DMZ. 4. Click the DMZ Enable drop-down list, and select Enable. 3. Review the virtual server settings. Click Add to save settings. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot. Check the option to the left most of the entry to enable and uncheck to disable. Rule Enable Check the option to enable the virtual server. Rule Name Enter a name for the virtual server. 5. Enter the IP address you assigned to the computer or network device to expose to the IP Address: Enter the IP address of the device to forward the port (e.g. Internet. 192.168.10.101). 6. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Protocol: Select the protocol required for your device. TCP, UDP, or Both (TCP and UDP). Public Port Enter the port number used to access the device from the Internet. Private Port Enter the port number required by your device. Refer to the connecting devices documentation for reference to the network port(s) required. Copyright 2016 TRENDnet. All Rights Reserved. 46 TRENDnet Users Guide Note: The Public Port can be assigned a different port number than the Private Port (also known as port redirection), however it is recommended to use the same port number for both settings. Please refer to the device documentation to determine which ports and protocols are required. It is recommended to assign a static IP address to the device or use DHCP reservation to ensure the IP address of the device does not change. Inbound Filter: Select the defined IP address range to allow access. (see Inbound Filter section on page 41). Schedule (Optional) The schedule function allows you to define a schedule when the virtual server should be turned on. To define a new schedule, click New Schedule and refer to page 39 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 38 to configure Time Settings and see page 39 Create Schedules to create a schedule. Example: To forward TCP port 80 to your IP camera TEW-827DRU 1. Setup DynDNS service (see Identify Your Network section page 37). 2. Access TRENDnet IP Camera management page and forward Port 80 (see product documentation) 3. Make sure to configure your network/IP camera to use a static IP address. Note: You may need to reference your camera documentation on configuring a static IP address. 4. Log into your router management page (see Access your router management page on page 10). 5. Click on Advanced and click on Firewall, then click on Virtual Server 6. Check the Rule Enable option to enable the Virtual Server. 7. Next to IP Address, enter the IP address assigned to the camera. (e.g. 192.168.10.101) 8. Next to Protocol, make sure TCP is selected in the drop-down list. 10. The Private Port and Public Port, enter port number 80 is configured for both settings. 11. To save the changes, click Add. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Note: In the Virtual Server List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking under the Delete column next to the rule you would like to delete. Copyright 2016 TRENDnet. All Rights Reserved. 47 TRENDnet Users Guide Special Applications Advanced > Firewall > Special Applications Application rules (also called port triggering) is typically used for online gaming applications or communication applications that require a range of ports or several ports to be dynamically opened on request to a device on your network. The router will wait for a request on a specific port or range of ports (or trigger port/port range) from a device on your network and once a request is detected by your router, the router will forward a single port or multiple ports (or incoming port/port range) to the device on your network. This feature is not typically used as most devices and routers currently use UPnP (Universal Plug and Play) to automatically configure your router to allow access for applications. See Enable/disable UPnP on your router on page 36. Note: Please refer to the device documentation to determine if your device supports UPnP first, before configuring this feature. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Firewall, then click on Special Applications. 3. Click the Port Triggering drop-down list, and select Enable. To save changes to this section, click Add when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. TEW-827DRU IP Address: Enter the IP address of the device to forward the port (e.g. 192.168.10.101). Match Protocol: Select the protocol for the firewall ports required for your device. TCP, UDP, or Any (TCP and UDP). Match Port: Enter the ports or port range to be forwarded to the device. (e.g. 2000-2038,2200-2210). Trigger Protocol (Trigger): Select the trigger port protocol requested by the device. TCP, UDP, or Any. Trigger Port: Enter the port requested by the device. (e.g. 554-554 or 6112-6112). Schedule (Optional) The schedule function allows you to define a schedule when the port trigger should be turned on. To define a new schedule, click New Schedule and refer to page 39 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 38 to configure Time Settings and see page 39 Create Schedules to create a schedule. 4. Review the application rule settings. Click Add to save settings. Check the option to the left most of the entry to enable and uncheck to disable. Rule Enable Check the option to enable the port trigger rule. Rule Name Enter a name for the port trigger rule. Note: In the Rule List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking Delete column next to the rule you would like to delete. under the Copyright 2016 TRENDnet. All Rights Reserved. 48 TRENDnet Users Guide Gaming Advanced > Firewall > Gaming Gaming allows you to define multiple ports (used or required by a specific application or game) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (see DMZ on page 42) in which DMZ forwards all ports instead of only specific ports used by an application. Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (see Identify your network over the Internet section on page 37). 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Security, then click on Gaming. 3. Review the virtual server settings. To save changes to this section, click Add when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. TEW-827DRU selection. Note: Before applying scheduling, please ensure your Time settings are configured correct and you have defined a schedule. See page 38 to configure Time Settings and see page 39 Create Schedules to create a schedule. Rule Enable Check the option to enable the gaming rule. Rule Name Enter a name for the gaming rule. Note: In the Rule List, you can edit a rule by clicking under the Edit column next to the rule you would like to edit. You can also delete a rule by clicking Delete column next to the rule you would like to delete. under the IP Address: Enter the IP address of the device to forward the ports (e.g. 192.168.10.101). TCP Ports to Open: Enter the TCP port you would like to set. UDP Ports to Open: Enter the UDP port you would like to set. Note: Please refer to the device documentation to determine which ports and protocols are required. You should assign a static IP address to the device or use DHCP reservation to ensure the IP address of the device does not change. Inbound Filter: Select the defined IP address range to allow access. (see Inbound Filter section on page 41). Schedule (Optional) The schedule function allows you to define a schedule when the gaming rule should be turned on. To define a new schedule, click New Schedule and refer to page 39 Create Schedules. After you have created a new schedule, click the drop-down list and the new schedule will be available for Copyright 2016 TRENDnet. All Rights Reserved. 49 TRENDnet Users Guide Allow remote access to your router management page Advanced > Setup > Management You may want to make changes to your router from a remote location such at your office or another location while away from your home. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click Setup, then click on Management. 3. Review the setting on the Remote Management section. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Add static routes Advanced > Setup > Routing TEW-827DRU You may want set up your router to route computers or devices on your network to other local networks through other routers. Generally, different networks can be determined by the IP addressing assigned to those networks. Generally speaking and for the case of an example, your network may have 192.168.10.x IP addressing and another network may have 192.168.20.x IP addressing and because the IP addressing of these two networks are different, they are separate networks. In order to communicate between the two separate networks, static routing needs to be configured. Below is an example diagram where routing is needed for devices and computers on your network to access the other network. Note: Configuring this feature assumes that you have some general networking knowledge. 1. Log into your router management page (see Access your router management page on page 10). Remote Control (via Internet): Click the drop-down list and select Enable to enable remote management or Disable to disable remote management. Remote Port: Enter the port to assign remote access to the router. It is recommended to leave this setting as 8080. Note: If you have configured port 8080 for another configuration section such as virtual server or special application, please change the port to use.
(Recommended port range 1024-65534) 2. Click on Advanced and click on Setup, then click on Routing. 3. Review the Routing section. Click Add to save settings. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &
Reboot. Destination IP Address: Enter the IP network address of the destination network for the route. (e.g. 192.168.20.0) Destination IP Netmask: Enter the subnet mask of the destination network for the route.(e.g. 255.255.255.0) Gateway: Enter the gateway to the destination network for the route.
(e.g. 192.168.10.2) Metric: Enter the metric or priority of the route. The metric range is 1-15, the lowest number 1 being the highest priority. (e.g. 1 ) Interface Select the interface to assign the route. Copyright 2016 TRENDnet. All Rights Reserved. 50 TRENDnet Users Guide TEW-827DRU When adding static routes, they will appear in the Static Route List. To delete a route, check the box in the No. column to select which routes to delete, then click Delete. Enable Dynamic Routing Advanced > Setup > Routing Note: Configuring this feature assumes that you have some general networking knowledge. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on Routing. 3. Review the Routing section. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot. Enable RIP: Click the drop-down list to enable or disable RIP dynamic routing protocol. RIP mode: Depending on which RIP version dynamic routing protocols your other routing devices support, click the appropriate version v1 or v2. Note: If selecting RIP v2, this requires basic password authentication between routing devices using this protocol. The password must match on all routing devices connected in order successfully exchange routing information. You may want set up your router to route computers or devices on your network to other local networks through other routers. Generally, different networks can be determined by the IP addressing assigned to those networks. Generally speaking and for the case of an example, your network may have 192.168.10.x IP addressing and another network may have 192.168.20.x IP addressing and because the IP addressing of these two networks are different, they are separate networks. In order to communicate between the two separate networks, static routing needs to be configured. Below is an example diagram where routing is needed for devices and computers on your network to access the other network. If you have other routing devices that support dynamic routing protocol, you can enable these routing protocols on your router to learn and automatically generate the routes needed between these networks. Copyright 2016 TRENDnet. All Rights Reserved. You can also view the current routing table under Routing Table. 51 TRENDnet Users Guide Using External USB Storage Your routers USB port can be used to share files through the network when a USB storage device is connected on the back USB port. The router supports both FTP and SAMBA (SMB) filing sharing protocols. Note: For security purposes, the USB SMB and FTP settings on your router are disabled by default. You will need to enable these settings in orders to allow access to your USB storage devices. Note: For security purposes, the default USB SMB and FTP admin password is configured to the same predefined password used to log into your router management page. File Sharing Server iTunes Server Advanced > USB > File Sharing Server TEW-827DRU DLNA Server Advanced > USB > File Sharing Server 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on USB, then click on File Sharing Server. 3. Check the Enable option to enable the DLNA server and click Apply. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. 4. All DLNA compliant client devices such PS3, mobile phone, etc. be able to easily discover and access files on the USB storage through DLNA compliant protocols. Samba Server Advanced > USB > File Sharing Server SMB (Samba) is a network protocol that allows you to access shared files through your network. In order to share files, you will need to plug in a USB storage device on the USB port on the back of the router. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on USB, then click on File Sharing Server. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on USB, then click on File Sharing Server. 3. Check the Enable option to enable the iTunes server and click Apply. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. 4. Computers with the iTunes application installed will be able to discover and browse the media found on the USB storage over the network. Copyright 2016 TRENDnet. All Rights Reserved. 3. Review the setting on Server Information section. Click Apply to save settings. Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot. 52 TRENDnet Users Guide TEW-827DRU Samba (SMB) Server: Select enable or disable for the feature. Server Name: You can change the name of your server which will be the name you will when accessing your USB storage device. (Note: You can also access the USB storage using the router IP address) Workgroup: Enter the workgroup name. It is recommended to keep the standard default WORKGROUP. If you change this setting, you will need to change the workgroup name on all computers in your network that are allowed access to the USB storage in order to discover it automatically. Otherwise, you will need to access the server by IP address. Description (optional): Enter a description of the server. 4. Review the administrator settings required for your File Sharing (SMB) Server. Click Apply to save settings. Administrator will have read and write access to files. To define user accounts continue to the next step. Note: For security purposes, the default administrator user name and password are set to your predefined user name and password setting to access the router management page. User Name: Enter the user name to be used to access your files. Password: Enter the password for the user name. Permission: Select the permission you will grant to the user. You can allow the user Read Only or Read-Write access to the USB storage. Under Windows, you can access the USB storage device on your computer under Computer > Network > USBSHARE > usb_A1. Note: Your computer will only be able to automatically discover the USB storage if you are set to a workgroup under the default name WORKGROUP. Your computer will not be able to automatically discover the USB storage device if under a domain or different a workgroup name. Under Windows, if your computer cannot discover the USB storage automatically, you can access these files under your network map or by typing !
(ex. \\192.168.10.1\usb_A1) on your browsers or file explorer address bar. Please follow the below steps to configure the routers SMB settings User Name: Enter the user name to be used to access your files. Password: Enter the password for the user name. Re-type Password to confirm. 5. Review the User Account List section. Click Add to add the account. Copyright 2016 TRENDnet. All Rights Reserved. 53 TRENDnet Users Guide FTP (File Transfer Protocol) Server Advanced > USB > FTP TEW-827DRU File Server Codepage: Defines which character set to use when transferring data using FTP. It is recommended to leave these settings as default Western European. FTP (File Transfer Protocol) is used to access shared files through the Internet. In order to share files, you will need to plug in a USB storage device on the USB port on the back of the router. 4. Review the User Account List section. Click Add to add the account. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on USB, then click on FTP Server. 3. Review the administrator settings required for your FTP server. Click Apply to save settings. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. FTP Server: Select enable or disable for the feature. Authentication: Selecting Enable will require user name and password authentication in order to access the USB storage using FTP. Selecting Disable will disable the user name and password authentication requirement for access the USB storage which can be access anonymously. Access From Internet: Selecting Enable will allow access to the USB storage using FTP over the Internet (WAN) and local (LAN) networks. Selecting Disable will disable FTP access over the Internet and allow LAN access only. User Name: Enter the user name to be used to access your files. Password: Enter the password for the user name. Permission: Select the permission you will grant to the user. You can allow the user Read Only or Read-Write access to the USB storage. Signing up for a Dynamic DNS service (outlined in Identify Your Network section pg.39) will provide identification of the routers network from the Internet. You can access your shared files over the Internet by typing ex.! > or ftp://myDDNSservice in your web browser or file explorer address bar. You can access your share files locally by typing ! > in your web browser or file explorer address bar. You can find your routers WAN IP address settings under Advanced > Administrator >
Status. Copyright 2016 TRENDnet. All Rights Reserved. 54 TRENDnet Users Guide BitTorrent Client Settings Advanced > USB > BitTorrent The router has an integrated BitTorrent client that can be used for downloading torrents directly to the external USB storage device connected to one of the router's USB ports. You can set parameters such as the maximum upload/download speeds, peer number, and connection port. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on USB, then click on BitTorrent. 3. Click the Status drop-down list and select Enable. Then click Apply. TEW-827DRU 5. After you have configured your client settings. Click Download Manager at the top of the page to manage your torrent downloads. 6. You can add new torrent files to the list under Upload Torrent by clicking Browse, and navigating to the location of the torrent file and selecting it. Once you have selected the torrent file, click Add to add the torrent to your download list. Note: You can continue to add more torrent downloads by clicking Browse and selecting each file one at a time. 4. This page allows you to configure the maximum bandwidth limits, seeding ratio, max peer number and peer number for peers, connection port, and enable/disable encryption. After you have completed your configuration changes click Apply. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. 7. The torrent download list will allow you to Start All or Stop All downloads. The Action section will allow you to delete or remove the specified torrent download. Note: You can click the Settings button at the top to return to the router management page. Copyright 2016 TRENDnet. All Rights Reserved. 55 TRENDnet Users Guide Virtual Private Networking (VPN) Creating a Virtual Private Network What is a VPN?
A VPN provides secure communications typically over the Internet by creating a secure tunnel between two or more VPN routers (gateways) also known as a site-to-site VPN or between a single client computer and a VPN router (gateway) also known as a client-
server VPN. On your VPN router, only the following type of tunnel can be created:
Client-Server VPN A single client computer or device with VPN client software installed connects to a VPN router (gateway) allow the single client computer or device to securely communicate to the LAN network of the VPN router over the Internet. Tunneling methods supported by your router:
SSL VPN This type of VPN is most commonly used in Client-Server VPN applications. Most modern operating systems may already include a built-in client software however, your router uses an SSL VPN implementation developed by OpenVPN which will require the installation of the OpenVPN client software supports operating systems such as Windows XP and later (32-bit/64-bit) and Linux. One major benefit to using the SSL protocol for VPN is that most networks allow the SSL protocol to passthrough which eliminates the requirement for special rules or configuration such as PPTP/L2TP/IPsec. Important Note: For any tunneling or VPN method used, to avoid IP address conflict and to ensure connectivity, it is required that each end (LAN IP network or single client) of the VPN tunnel is configured with a different IP network or subnet. Copyright 2016 TRENDnet. All Rights Reserved. A. Router Configuration Advanced > Setup > VPN TEW-827DRU 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Setup, then click on VPN. 3. Next to VPN, click Enable. Note: You may receive a notification if Dynamic DNS is not configured on your router. If you are using VPN, it is not required however, strongly recommended to setup the Dynamic DNS feature on your router to prevent any issues with VPN connectivity if your public (WAN) Internet IP address dynamically changes. Please reference page 41 Identify your Network on the Internet for details on setting up the Dynamic DNS feature. The additional server settings are optional (not required) and can be configured if any issues are encountered when attempting to establish VPN connectivity. 56 TRENDnet Users Guide TEW-827DRU Port: A different port number may be entered however, 1194 is the default port used with the OpenVPN client software. Protocol: TCP or UDP may be selected however, UDP is the default protocol used with the OpenVPN client software. IP / Subnet Mask: The IP address subnet specifies the IP address range assigned to VPN client devices up establishing connectivity. User Authentication: This is an additional layer of authentication that be added as a requirement to connect. To add users, you scroll down to the bottom of the page and add users. You will be prompted on the client side for user name and password if enabling this feature. 4. Click Apply to save the changes. 5. Under VPN Client Configuration, click on Export to download the configuration files for the VPN client computer. Please note that these files will need to be installed on the VPN client computer later on in order to establish VPN connectivity. (Default Filename:
client.ovpn) Note: Please do not change the filename for Windows installation. If installing in Linux, the .ovpn extension must be changed to .conf. Copyright 2016 TRENDnet. All Rights Reserved. B. Client Configuration After the VPN server has been configured, the steps below will demonstrate how to setup a Windows computer for VPN access to your router. 1. Make sure to copy or move the configuration files downloaded from your router to the VPN client computer and that your client computer has access to the Internet. 2. Download the appropriate OpenVPN software version for your operating system from the following URL: https://openvpn.net/index.php/open-source/downloads.html Note: Please note there is also a link in the description in the router management page under Advanced > Setup > VPN. 3. Once you have downloaded the software, navigate to the location where you downloaded the file and double click to start the installation. 57 TRENDnet Users Guide 4. If prompted to run the file, click Run. TEW-827DRU 6. At the license agreement window, review the license agreement and click I Agree. 5. At the installation window, click Next. 7. At the choose components window, click Next. Copyright 2016 TRENDnet. All Rights Reserved. 58 TRENDnet Users Guide 8. At the install location window, click Install. 10. At the installation completion window, click Next. TEW-827DRU 9. At the prompt to install the TAP-Windows adapter, click Install. 11. Make sure to uncheck the Show Readme and Start OpenVPN GUI options and click Finish. Copyright 2016 TRENDnet. All Rights Reserved. 59 TRENDnet Users Guide 12. Copy the client configuration file(s) (client.ovpn) downloaded from the router to the following path without any sub-folders. C:\Program Files\OpenVPN\config TEW-827DRU 15. After right-clicking the icon, the menu will appear. Click Connect to establish your VPN connection to your router. 16. If the VPN connection is successful, you will receive the notification below in the bottom right corner. You will be able to access resources securely from your router LAN network over the Internet such as shared folders, media, files, etc. 13. Double-click on the OpenVPN GUI shortcut on your desktop to start the OpenVPN Client software. 14. The OpenVPN system tray icon will appear in the bottom right corner. Right-click the icon to display the configuration menu. Copyright 2016 TRENDnet. All Rights Reserved. Note: To disconnect your VPN client connection, right click OpenVPN system tray icon and select Disconnect. 60 TRENDnet Users Guide Router Maintenance & Monitoring Reset your router to factory defaults Advanced > Administrator > Settings Management You may want to reset your router to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting. Before you reset your router to defaults, if possible, you should backup your router configuration first, see Backup and restore your router configuration settings on page 62. There are two methods that can be used to reset your router to factory defaults. Reset Button Located on the side panel of your router, see Product Hardware Features on page 2. Use this method if you are encountering difficulties with accessing your router management page. OR Router Management Page Router Default Settings TEW-827DRU Administrator User Name admin Administrator Password Please refer to sticker or device label Router Default URL http://tew-827dru Router IP Address Router Subnet Mask 192.168.10.1 255.255.255.0 DHCP Server IP Range 192.168.10.101-192.168.199 Wireless 2.4GHz & 5GHz Enabled Wireless 2.4GHz Network Name/Encryption Please refer to sticker or device label Wireless 2.4GHz & 5GHz Guest Network Disabled 1. Log into your router management page (see Access your router management page USB SMB & FTP Settings Disabled on page 10). 2. Click on Advanced and click on Administrator, then click on Settings Management. 3. Next to Reset to Factory Default Settings and Reset, click Load Default. When prompted to confirm this action, click OK. USB SMB & FTP User Name Same as Administrator USB SMB & FTP Password Same as Administrator Copyright 2016 TRENDnet. All Rights Reserved. 61 TRENDnet Users Guide Backup and restore your router configuration settings Advanced > Administrator > Settings Management Reboot your router Advanced > Administrator > Settings Management TEW-827DRU You may have added many customized settings to your router and in the case that you need to reset your router to default, all your customized settings would be lost and would require you to manually reconfigure all of your router settings instead of simply restoring from a backed up router configuration file. To backup your router configuration:
1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on Settings Management. 3. Next to Export Settings section and Export, click Export. You may want to restart your router if you are encountering difficulties with your router and have attempted all other troubleshooting. There are two methods that can be used to restart your router. Turn the router off for 10 seconds using the router On/Off switch located on the rear panel of your router or disconnecting the power port, see Product Hardware Features on page 2. Use this method if you are encountering difficulties with accessing your router management page. This is also known as a hard reboot or power cycle. OR Router Management Page This is also known as a soft reboot or restart. 1. Log into your router management page (see Access your router management page 4. Depending on your web browser settings, you may be prompted to save a file (specify on page 10). the location) or the file may be downloaded automatically to the web browser settings default download folder. (Default Filename: TEW-827DRU_config.bin) To restore your router configuration:
1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on Settings Management. 3. Next to Import Settings section and Settings File Location, click Browse. 4. A separate file navigation window should open. 5. Select the router configuration file to restore and click Import. (Default Filename:
TEW-827DRU_config.bin). If prompted, click Yes or OK. 6. Wait for the router to restore settings. 2. Click on Advanced and click on Administrator, then click on Settings Management. 3. Next to System Reboot, click Reboot. 4. Wait for the device to reboot. Copyright 2016 TRENDnet. All Rights Reserved. 62 TRENDnet Users Guide Upgrade your router firmware Advanced > Setup > Firmware TRENDnet may periodically release firmware upgrades that may add features or fix problems associated with your TRENDnet router model and version. To check if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the one your router is currently running. To identify the firmware that is currently loaded on your router, log in to the router, click on the Administrator section and then on the Status. The firmware used by the router is listed at the top of this page. If there is a newer version available, also review the release notes to check if there were any new features you may want or if any problems were fixed that you may have been experiencing. 1. Log into your router management page (see Access your router management page TEW-827DRU on page 10). 2. Click on Advanced and click Setup, then click Firmware. 3. Depending on your web browser, in the Upload Firmware section, click Browse or Choose File. 4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is located and select it. 1. If a firmware upgrade is available, download the firmware to your computer. 2. Unzip the file to a folder on your computer. Please note the following:
5. Click Apply. If prompted, click Yes or OK. Do not interrupt the firmware upgrade process. Do not turn off the device or press the Reset button during the upgrade. If you are upgrade the firmware using a laptop computer, ensure that the laptop is connected to a power source or ensure that the battery is fully charged. Disable sleep mode on your computer as this may interrupt the firmware upgrade process. Do not upgrade the firmware using a wireless connection, only using a wired network connection. Any interruptions during the firmware upgrade process may permanently damage your router. Copyright 2016 TRENDnet. All Rights Reserved. 63 TRENDnet Users Guide Allow/deny ping requests to your router from the Internet Advanced > Administrator > Advanced Network To provide additional security, you may want to disable your router from responding to ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is network communication test to check if a device with IP address is alive or exists on the network. By disabling this feature, you can conceal your routers IP address and existence on the Internet by denying responses to ping requests from the Internet. You can additionally use this feature as a tool for troubleshooting purposes 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on Advanced Network. 3. Next to WAN Ping, Click the WAN Ping Respond drop-down list and Enable to allow your router to respond to ping requests from the Internet. You can also choose Disable to block WAN ping requests from the Internet How to capture network packets Advanced > Administrator > Advanced Network TEW-827DRU The router has the built-in capability to capture network packets for troubleshooting purposes. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on Advanced Network. 3. Under Capture Packets, click the Network Interface drop-down list and select interface you would like to capture packets on (LAN or WAN). Click Start to start the capture and click Stop to stop the capture. You can click Download to download the packet capture file to view in the packet capture program such as Wireshark. 4. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot. Copyright 2016 TRENDnet. All Rights Reserved. 64 TRENDnet Users Guide Diagnostic Tools Advanced > Administrator > Diagnostics Wireless Client List Advanced > Wireless (2.4GHz or 5GHz) > Station List TEW-827DRU The router also provides additional tools for network troubleshooting such as ping test, traceroute, nslookup, and netstat. You can view the list of active wireless devices currently connected to your router. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on Station List MAC Address: The current MAC address of your 2.4GHz wireless client. Mode: Displays the 802.11 mode associated with the client. Rate: Displays the estimated data rate established with the client. Signal: Displays the estimated signal strength associated with the client. Copyright 2016 TRENDnet. All Rights Reserved. 65 TRENDnet Users Guide Check the router system information Advanced > Administrator > Status You may want to check the system information of your router such as WAN (Internet) connectivity, wireless and wired network settings, router MAC address, and firmware version. TEW-827DRU Internet Configuration Connected Type: Displays the current WAN connection type applied. WAN IP Address The current IP address assigned to your router WAN port or interface configuration. WAN MAC Address: Displays the current WAN MAC address. Subnet Mask - The current subnet mask assigned to your router WAN port or interface configuration. 1. Log into your router management page (see Access your router management page Default Gateway The current gateway assigned to your router WAN port or on page 10). 2. Click on Advanced and click on Administrator, then click on Status System Information interface configuration. Primary/Secondary DNS (Domain Name System) Server The current DNS address(es) assigned to your router port or interface configuration. Firmware Version The current firmware version your router is running. Time: The current time set on your router. System Up Time The duration your router has been running continuously without a restart/power cycle (hard or soft reboot) or reset. DHCP WAN Type: These buttons will be available in DHCP WAN type only. o Renew: Click this option to renew your WAN IP address. o Release: Click this option to release the WAN IP address of your router. PPPoE WAN Type: These buttons will be available in DHCP WAN type only. o Connect: Click this option to connect to your DSL ISP o Disconnect: Click this option to disconnect from your DSL ISP. Copyright 2016 TRENDnet. All Rights Reserved. 66 TRENDnet Users Guide LAN Information 5GHz Wireless LAN TEW-827DRU MAC Address The current MAC address of your routers wireless or interface MAC Address: The MAC address of your routers 5GHz wireless LAN interface configuration. Network Name (SSID) / Security Mode: Displays the current 5GHzprimary wireless network name and security mode assigned to your router. Multiple SSID1 / Security Mode: Displays the current 5GHz wireless network name and security mode of multiple SSID1 assigned to your router. Multiple SSID2 / Security Mode: Displays the current 5GHz wireless network name and security mode of multiple SSID2 assigned to your router. Guest Network / Security Mode: Displays the current 5GHz wireless network name and security mode of the guest network assigned to your router. configuration. IP Address - Displays your routers current IP address. Subnet Mask Displays your routers current subnet mask. 2.4GHz Wireless LAN MAC Address: The MAC address of your routers 2.4GHz wireless LAN interface configuration. Network Name (SSID) / Security Mode: Displays the current 2.4GHzprimary wireless network name and security mode assigned to your router. Multiple SSID1 / Security Mode: Displays the current 2.4GHz wireless network name and security mode of multiple SSID1 assigned to your router. Multiple SSID2 / Security Mode: Displays the current 2.4GHz wireless network name and security mode of multiple SSID2 assigned to your router. Guest Network / Security Mode: Displays the current 2.4GHz wireless network name and security mode of the guest network assigned to your router. Copyright 2016 TRENDnet. All Rights Reserved. 67 TRENDnet Users Guide IPv6 Status Advanced > Administrator > IPv6 Status You can view the current IPv6 status on your router. TEW-827DRU View your router log Advanced > Administrator > System Log Your router log can be used to obtain activity information on the functionality of your router or for troubleshooting purposes. 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on IPv6 Status 1. Log into your router management page (see Access your router management page on page 10). 2. Click on Advanced and click on Administrator, then click on System Log. 3. Check the Enable System Log option to enable logging. Then click Apply. The logging will display in the log window. Note: Clicking Refresh will refresh the page to ensure display of the most recent logging information. Click Clear will clear and delete all of the current logging information. Log Window 68 Copyright 2016 TRENDnet. All Rights Reserved. TRENDnet Users Guide Router Management Page Structure BASIC Network Status Wireless o 2.4GHz Settings & Security o 5GHz Settings & Security Guest Network Parental Control o MAC/IP Address Filter o Website Filter Qualcomm StreamBoost o Bandwidth o My Network Router Node View Device Node View o Priorities o Usage by Time o Usage by Data ADVANCED Administrator Status IPv6 Status System Log o o o o Advanced Network UPnP TEW-827DRU o Settings Management Export/Import configuration Reset to factory default Reboot o Time Setup o LAN Settings IP Address Setting DHCP Server Setting DHCP Reservation o WAN Settings o Routing o o o o Management IPv6 Settings Schedule Firmware Administrator Password Dynamic DNS Remote Management o DHCP Client List o Wizard Wireless 2.4GHz o Advanced o Multiple SSID o MAC Filter (Wireless) o WPS o Station List Wireless 5GHz o Advanced o Multiple SSID o MAC Filter (Wireless) o WPS o Station List Security o Access Control (IP Protocol Filter) o Inbound Filter Firewall o DMZ o Virtual Server o Special Applications o Gaming o ALG USB o o File Sharing Server FTP Server o BitTorrent o Eject Device Copyright 2015 TRENDnet. All Rights Reserved. 69 TRENDnet Users Guide Technical Specifications Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3az IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n (up to 800 Mbps)*
IEEE 802.11ac (up to 1733 Mbps)*
Hardware Interface 4 x Gigabit LAN ports 1 x Gigabit WAN port 2 x USB 3.0 (Storage FTP, Samba, iTunes Media Server, BitTorrent Client) Power switch WPS button Reset button WiFi on/off LED on/off LED indicators Special Features StreamBoost automatically identifies and classifies network traffic to maximize bandwidth and speed***
Multi-User MIMO for increased bandwidth efficiency and better user experience*
Pre-encrypted wireless network IPv6 support 1 guest network per band with option for internet access only Multi-Language interface: English, French, Spanish, German, Russian Up to 2 additional SSIDs per band Dynamic DNS support for dyn.com, no-ip.com, and easydns.com Samba/FTP server support Implicit and Explicit Beamforming Copyright 2016 TRENDnet. All Rights Reserved. Access Control TEW-827DRU Wireless encryption up to WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS Firewall: NAT, SPI, Virtual Server, Special Applications, Gaming, DMZ Host, allow/deny ping request from internet ALG: PPTP/L2TP/IPsec VPN Passthrough, TFTP/FTP/RTSP/SIP/H.323 Passthrough Parental (Access) Controls: MAC, URL, IP Filter Quality of Service WMM StreamBoost Traffic Shaping***
Static IP (Fixed) PPPoE (Dynamic IP/Static IP) PPTP (Dynamic IP/Static IP) L2TP(Dynamic IP/Static IP) Internet Connection Types Dynamic IP (DHCP) Russia PPPoE (Dynamic IP/Static IP) Russia PPTP (Dynamic IP/Static IP) Russia L2TP (Dynamic IP/Static IP) IPv6 (Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE, 6to4) Management/Monitoring Local/remote web based management Upgrade firmware Backup/restore configuration Reboot Restore to factory defaults Internal logging Ping test Routing Static Dynamic (RIP v1/2) Frequency 2.412 - 2.472 GHz 5.180 5.825 GHz 70 TEW-827DRU Certifications CE FCC Dimensions 250 x 180 x 45 mm (9.8 x 7.1 x 1.8 in.) Weight 752 g (26.5 oz.)
*Disclaimers*
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 1.733 Gbps use with a 1.733 Gbps 802.11ac wireless adapter. For maximum performance of up to 800 Mbps, use with an 800 Mbps 802.11n wireless adapter. Multi-
User MIMO (MU-MIMO) requires the use of multiple MU-MIMO enabled wireless adapters.
** Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.
***Qualcomm StreamBoost is a trademark of Qualcomm Atheros, Inc. TRENDnet Users Guide Modulation 802.11b: CCK, DQPSK, DBPSK 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM Media Access Protocol CSMA/CA with ACK Antenna Gain 2.4 GHz: 4 x 3 dBi (max.) detachable/external; 5 GHz: 4 x 5 dBi Wireless Output Power (max output power without antenna gain) 802.11a: FCC: 26 dBm (max.) / ETSI: 29 dBm (max.) @ 54 Mbps 802.11b: FCC: 27 dBm (max.) / ETSI: 14 dBm (max.) @ 11 Mbps 802.11g: FCC: 29 dBm (max.) / ETSI: 16 dBm (max.) @ 54 Mbps 802.11n (2.4 GHz): FCC: 29 dBm (max.) / ETSI: 16 dBm (max.) @ 800 Mbps 802.11n (5 GHz): FCC: 27 dBm (max.) / ETSI: 28 dBm (max.) @ 800 Mbps 802.11ac: FCC: 21 dBm (max.) / ETSI: 23 dBm (max.) @ 1733 Mbps Receiving Sensitivity 802.11a: -68 dBm (typical) @ 54 Mbps 802.11b: -83 dBm (typical) @ 11 Mbps 802.11g: -70 dBm (typical) @ 54 Mbps 802.11n (2.4 GHz): -64 dBm (typical) @ 800 Mbps 802.11n (5 GHz): -68 dBm (typical) @ 800 Mbps 802.11ac: -55 dBm (typical) @ 1733 Mbps Wireless Channels 2.4 GHz: FCC: 1-11; ETSI: 1-13 5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48, (52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140)**
Power Output: 12V DC, 3 A external power adapter Input: 100 240 V AC, 50 - 60 Hz, 1 A Consumption: 31 Watts max. Operating Temperature 0 40 C (32 104 F) Operating Humidity Max. 95% non-condensing Copyright 2016 TRENDnet. All Rights Reserved. 71 TRENDnet Users Guide TEW-827DRU Troubleshooting Q: I typed http://tew-827dru in my Internet Browser Address Bar, but an error message says The page cannot be displayed. How can I access the router management page?
Answer:
Access the router using the default IP address 192.168.10.1. http://192.168.10.1 Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error message says The page cannot be displayed. How can I access the router management page?
Answer:
1. Check your hardware settings again. See Router Installation on page 8. 2. Make sure the LAN and WLAN lights are lit. 3. Make sure your network adapter TCP/IP settings are set to Obtain an IP address automatically or DHCP (see the steps below). 4. Make sure your computer is connected to one of the routers LAN ports 5. Press on the factory reset button for 15 seconds, the release. Windows 7/8/8.1 a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK. Windows Vista a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. d. Then click Obtain an IP address automatically and click OK. Windows XP/2000 a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. Copyright 2016 TRENDnet. All Rights Reserved. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. Q: I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?
Answer:
Contact your Internet Service Provider (ISP) for the correct information. Q: The Wizard does not appear when I access the router. What should I do?
Answer:
1. Click on Wizard on the left hand side. 2. Near the top of the browser, Pop-up blocked message may appear. Right click on the message and select Always Allow Pop-ups from This Site. 3. Disable your browser's pop up blocker. Q: I went through the Wizard, but I cannot get onto the Internet. What should I do?
Answer:
1. Verify that you can get onto the Internet with a direct connection into your modem
(meaning plug your computer directly to the modem and verify that your single computer (without the help of the router) can access the Internet). 2. Power cycle your modem and router. Unplug the power to the modem and router. Wait 30 seconds, and then reconnect the power to the modem. Wait for the modem to fully boot up, and then reconnect the power to the router. 3. Contact your ISP and verify all the information that you have in regards to your Internet connection settings is correct. Q: I cannot connect wirelessly to the router. What should I do?
Answer:
1. Double check that the WLAN light on the router is lit. 2. Power cycle the router. Unplug the power to the router. Wait 15 seconds, then plug the power back in to the router. 3. Contact the manufacturer of your wireless network adapter and make sure the wireless network adapter is configured with the proper SSID. The preset SSID is TRENDnet(model_number). 4. To verify whether or not wireless is enabled, login to the router management page, click on Wireless. 5. Please see Steps to improve wireless connectivity on page 20 if you continue to have wireless connectivity problems. 72 TEW-827DRU TRENDnet Users Guide Appendix How to find your IP address?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Command Prompt Method Windows 2000/XP/Vista/7/8/8.1/10 1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box. 2. In the dialog box, type cmd to bring up the command prompt. 3. In the command prompt, type ipconfig /all to display your IP address settings. MAC OS X 1. Navigate to your Applications folder and open Utilities. 2. Double-click on Terminal to launch the command prompt. 3. In the command prompt, type ipconfig getifaddr <en0 or en1> to display the wired or wireless IP address settings. Note: en0 is typically the wired Ethernet and en1 is typically the wireless Airport interface. Graphical Method MAC OS 10.6/10.5 1. From the Apple menu, select System Preferences. 2. In System Preferences, from the View menu, select Network. 3. In the Network preference window, click a network port (e.g., Ethernet, AirPort, modem). If you are connected, you'll see your IP address settings under "Status:"
MAC OS 10.4 1. From the Apple menu, select Location, and then Network Preferences. 2. In the Network Preference window, next to "Show:", select Network Status. You'll see your network status and your IP address settings displayed. Copyright 2016 TRENDnet. All Rights Reserved. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to configure your network settings to obtain an IP address automatically or use DHCP?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Windows 7/8/8.1/10 a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK. Windows Vista a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. d. Then click Obtain an IP address automatically and click OK. Windows XP/2000 a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. MAC OS 10.4/10.5/10.6 a. From the Apple, drop-down list, select System Preferences. b. Click the Network icon. c. From the Location drop-down list, select Automatic. d. Select and view your Ethernet connection. In MAC OS 10.4, from the Show drop-down list, select Built-in Ethernet and select the TCP/IP tab. In MAC OS 10.5/10.6, in the left column, select Ethernet. e. Configure TCP/IP to use DHCP. 73 TRENDnet Users Guide TEW-827DRU In MAC 10.4, from the Configure IPv4, drop-down list, select Using DHCP and click the Apply Now button. In MAC 10.5, from the Configure drop-down list, select Using DHCP and click the Apply button. In MAC 10.6, from the Configure drop-down list, select Using DHCP and click the Apply button. f. Restart your computer. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to find your MAC address?
In Windows 2000/XP/Vista/7/8.1/10, Your computer MAC addresses are also displayed in this window, however, you can type getmac v to display the MAC addresses only. In MAC OS 10.4, 1. Apple Menu > System Preferences > Network 2. From the Show menu, select Built-in Ethernet. 3. On the Ethernet tab, the Ethernet ID is your MAC Address. In MAC OS 10.5/10.6, 1. Apple Menu > System Preferences > Network 2. Select Ethernet from the list on the left. 3. Click the Advanced button. 3. On the Ethernet tab, the Ethernet ID is your MAC Address. How to connect to a wireless network using the built-in Windows utility?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility. Windows 7/8/8.1/10 1. Open Connect to a Network by clicking the network icon (
area. or
) in the notification 2. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows Vista 1. Open Connect to a Network by clicking the Start Button. To. and then click Connect 2. In the Show list, click Wireless. 3. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows XP 1. Right-click the network icon in the notification area, then click View Available Wireless Networks. 2. In Connect to a Network, under Available Networks, click the wireless network you would like to connect to. 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. Copyright 2016 TRENDnet. All Rights Reserved. 74 TRENDnet Users Guide Federal Communication Commission Interference Statement Europe EU Declaration of Conformity TEW-827DRU This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. interference received, including Operation of this device is restricted to indoor use only IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EN60950-1 : 2006 + A11 : 2009 + A1: 2010 + A12: 2011 + A2: 2013 IEC 60950-1: 2005 + A1: 2009 + A2: 2013 EMC EN 55022: 2010 + AC: 2011 EN 55024: 2010 EN 301 489-1 V1.9.2: 09-2011 EN 301 489-17 V2.2.1: 09-2012 Radio Spectrum & Health EN 300 328 V1.9.1 : 02-2015 EN 301 893 V1.8.1 : 03-2015 EN 62311: 2008 Energy Efficiency Regulation (EC) No. 1275/2008, Regulation, No. 278/2009, No. 801/2013 This product is herewith confirmed to comply with the Directives. Directives Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC R&TTE Directive 1999/5/EC EMF Directive 1999/519/EC Ecodesign Directive 2009/125/EC RoHS Directive 2011/65/EU REACH Regulation (EC) No. 1907/2006 Lot 26 Statement: This product is inappropriate for the intended use according to HiNA requirements. Copyright 2016 TRENDnet. All Rights Reserved. 75 TRENDnet Users Guide TEW-827DRU esky [Czech]
Dansk [Danish]
Deutsch
[German]
Eesti [Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
TRENDnet tmto prohlauje, e tento TEW-827DRU je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES, 2006/95/ES, 2004/108/ES, 1999/519/ES, 2011/65/EU, a 2009/125/ES. Undertegnede TRENDnet erklrer herved, at flgende udstyr TEW-
827DRU overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF, 2006/95/EF, 2004/108/EF, 1999/519/EF, 2011/65/EU, og 2009/125/EF. Hiermit erklrt TRENDnet, dass sich das Gert TEW-827DRU in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG, 2006/95/EG, 2004/108/EG, 1999/519/EG, 2011/65/EU, und 2009/125/EG befindet. Kesolevaga kinnitab TRENDnet seadme TEW-827DRU vastavust direktiivi 1999/5/E, 2006/95/E, 2004/108/E, 1999/519/E, 2011/65/EU, ja 2009/125/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, TRENDnet, declares that this TEW-827DRU is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2006/95/EC, 2004/108/EC, 1999/519/EC, 2011/65/EU, and 2009/125/EC. Por medio de la presente TRENDnet declara que el TEW-827DRU cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE, 2006/95/CE, 2009/125/CE, 2004/108/CE, 1999/519/CE, 2011/65/EU y. TRENDnet TEW-
827DRU 1999/5/, 2006/95/, 2009/125/, 2004/108/EK, 1999/519/EK, 2011/65/EU . Par la prsente TRENDnet dclare que l'appareil TEW-827DRU est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE, 2006/95/CE, 2009/125/CE, 2004/108/CE, 1999/519/CE, 2011/65/EU et. Italiano[Italian]
Con la presente TRENDnet dichiara che questo TEW-827DRU conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE, 2006/95/CE, 2004/108/CE, 1999/519/CE, 2011/65/EU e 2009/125/CE. Latviski [Latvian] AroTRENDnetdeklar, ka TEW-827DRU atbilstDirektvas 1999/5/EK, 2006/95/EK, 2004/108/EK, 1999/519/EK, 2011/65/EU, un 2009/125/EK btiskajmprasbm un citiemar to saisttajiemnoteikumiem. iuo TRENDnet deklaruoja, kad is TEW-827DRU atitinka esminius reikalavimus ir kitas 1999/5/EB, 2006/95/EB, 2004/108/EB, 1999/519/EB, 2011/65/EU, ir 2009/125/EB Direktyvos nuostatas. Hierbij verklaart TRENDnet dat het toestel TEW-827DRU in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG, 2006/95/EG, 2004/108/EG, 1999/519/EG, 2011/65/EU en 2009/125/EG. Hawnhekk, TRENDnet, jiddikjara li dan TEW-827DRU jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/KE, 2006/95/KE, 2004/108/KE, 1999/519/KE, 2011/65/EU u 2009/125/KE. Alulrott, TRENDnet nyilatkozom, hogy a TEW-827DRUmegfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv, a 2006/95/EK, 2004/108/EK, 1999/519/EK, 2011/65/EU, s a 2009/125/EK irnyelv egyb elrsainak. Niniejszym TRENDnet owiadcza, e TEW-827DRU jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/WE, 2006/95/WE, 2004/108/WE, 1999/519/WE, 2011/65/EU i 2009/125/WE. TRENDnet declara que este TEW-827DRU est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE, 2006/95/CE, 2004/108/CE, 1999/519/CE, 2011/65/EU e 2009/125/CE. TRENDnet izjavlja, da je ta TEW-827DRU v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES, 2006/95/ES, 2004/108/ES, 1999/519/ES, 2011/65/EU in 2009/125/ES. TRENDnettmtovyhlasuje, e TEW-827DRUspazkladnpoiadavky a vetkyprslunustanoveniaSmernice 1999/5/ES, 2006/95/ES, 2004/108/ES, 1999/519/ES, 2011/65/EU a 2009/125/ES. Lietuvi
[Lithuanian]
Nederlands
[Dutch]
Malti [Maltese]
Magyar
[Hungarian]
Polski [Polish]
Portugus
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Copyright 2016 TRENDnet. All Rights Reserved. 76 TRENDnet Users Guide TEW-827DRU Suomi [Finnish]
TRENDnet vakuuttaa tten ett TEW-827DRU tyyppinen laite on direktiivin 1999/5/EY, 2006/95/EY, 2004/108/EY, 1999/519/EY, 2011/65/EU ja 2009/125/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska
[Swedish]
Hrmed intygar TRENDnet att denna TEW-827DRU str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG, 2006/95/EG, 2004/108/EG, 1999/519/EG, 2011/65/EU och 2009/125/EG. Copyright 2016 TRENDnet. All Rights Reserved. 77 TRENDnet Users Guide Industry Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
TEW-827DRU Caution:
the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(1) This device may not cause interference; and Avertissement:
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. les dispositifs fonctionnant dans la bande de 5150 5250MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 29cm entre le radiateur et votre corps. This radio transmitter (IC: 6337A-TEW827DRU) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 6337A-TEW827DRU) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Type Dipole Manufacture Gain Connector WHAYU 3 dBi (2.4G) /5dBi (5.0G) R-SMA Copyright 2016 TRENDnet. All Rights Reserved. 78 TRENDnet Users Guide Limited Warranty Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-827DRU 3 Years Warranty EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNETS PRODUCTS. AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement units warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMERS SOLE REMEDY SHALL BE, AT TRENDNETS OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, Copyright 2016 TRENDnet. All Rights Reserved. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMERS OR ANY THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNETS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for specific terms of each license. PWP05202009v2 2015/11/20 79
1 2 | ID Label/Location Info | ID Label/Location Info | 714.25 KiB |
2015.09.08 TEW-827DRU/EUNL H/W:V1.0R
:Arial/Monaco 7610T827DR11ES1 TRENDnet Cherry Vicki Master Carton UPC: 10710931160724 UPC Code: 710931160727 101.00 mm MODEL: TEW-827DRU/EUNL 1 0 7 1 0 9 3 1 1 6 0 7 2 4 10 PCS Q'ty:
S/N:
To From m m 0 0
. 2 5 1 C2YYWW27XXXXX C2YYWW27XXXXX H/W:V1.0R N.W.: KGS F/W: ver1.00bxx G.W.: KGS CARTON OF NO. XX/XX
S/N:C2YYWW27XXXXX C2: ( ) YY : , ex~15:2015 WW: , ex~06:
27: ( ) XXXXX:
XU8TEW827DRU FCC ID:
IC ID: 6337A-TEW827DRU F/W Version F/W: ver1.00bxx Giftbox Label 47.00 mm Model: TEW-827DRU/EUNL H/W:V1.0R F/W:ver1.00bxx FCC ID:
XU8TEW827DRU IC ID: 6337A-TEW827DRU
"See Caution in Manual"
S/N:C2YYWW27XXXXX Made in China m m 0 0
. 1 2 Preset Preset Wireless Settings Wireless Settings Wi-Fi Name/SSID TRENDnet827_5GHz_XXXX
(AC/N)
(N/B/G) TRENDnet827_2.4GHz_XXXX Wi-Fi Password XXXXXXXXXXX Management Login http://tew-827dru username: admin password: XXXXXX FCC ID: XU8TEW827DRU IC: 6337A-TEW827DRU
: Monaco
Model: TEW-827DRU H/W:V1.0R FCC ID: XU8TEW827DRU IC: 6337A-TEW827DRU F/W: ver1.00bxx Wi-Fi Name/SSID TRENDnet827_2.4GHz_XXXX Wi-Fi Password: 827W27XXXXX Management Login:http://tew-827dru Username: admin Password:
AAAAAAAA WPS PIN:XXXXXXXX Power Input: 12V 3A S/N:C2YYWW27XXXXX LAN MAC WAN MAC: XXXXXXXXXXXX/#
: XXXXXXXXXXXX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Operation within the 5.150-5.350GHz frequency range is restricted to indoor use only. Made in China 29054610000001T SSID:
TRENDnet827_2.4GHz_ XXXX 1. Wi-Fi Name/
(TRENDnet827_2.4GHz_;
XXXX4 random number and characters, X0~9, A~Z, "I"and"O"
TRENDnet827_2.4GHz_1A3B) 2. Wi-Fi Key: 827W27XXXXX (827;W27XXXXX) 3. 4. Web password: AAAAAAAA~8 random digit (7 + 1 ) Alphanumeric range: 23456789ABCDEFGHJKLMNPQRSTUVWXYZ
(0/1 Iand O)
5. Management Login: http://tew-827dru Web username: admin TRENDnetMAC ID
A,N /FCC E,B /ETSI 290546100000020 Label Location
1 2 | Ad Hoc Declaration | Cover Letter(s) | 110.46 KiB |
TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Date: September 3, 2015 Subject: Ad Hoc Mode Function Declaration To whom it may concern, following product. FCC ID: XU8TEW827DRU We, TRENDnet, Inc. declare that the device does not support any non-US channels and country code selection in all the operational mode(s) for the Regards, Address Signature
Applicant
: TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 _________________________________ Name and Job Title.
: Wen Tsai / Sr. Product Manager E-mail Tel.
: w.tsai@trendnet.com
: 310-961-5500
1 2 | Confidentiality | Cover Letter(s) | 131.92 KiB |
TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Confidentiality Request Letter Date: 2015/9/3 Federal Communications Commission Authorization and Evaluation Division FCC IDXU8TEW827DRU Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:
1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant
: TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Address Signature
_________________________________ Name and Job Title.
: Wen Tsai / Sr. Product Manager E-mail Tel.
: w.tsai@trendnet.com
: 310-961-5500
1 2 | DOC | Cover Letter(s) | 100.48 KiB |
TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: September 3, 2015 Subject: FCC Application for FCC ID:XU8TEW827DRU To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as computer peripheral has been authorized under the Declaration of Conformity procedures, which the report issued from International Certification Corp. (report number: FD562901.) Applicant Address
: TRENDnet, Inc.
: 20675 Manhattan Place, Torrance, CA 90501 Signature
_________________________________ Name and Job Title.
: Wen Tsai / Sr. Product Manager E-mail Tel.
: w.tsai@trendnet.com
: 310-961-5500
1 2 | Power of Attorney Letter | Cover Letter(s) | 76.65 KiB |
TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Date: 2015/9/3 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: XU8TEW827DRU To whom it may concern:
Subject: Product Certification Representative Authorization Letter We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization o the FCC Rules and Regulations. No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan International Certification Corp. Address
(R.O.C.) Name
: Gary Chang Job Title
: Manager e-mail
: garychang@icertifi.com.tw Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant
: TRENDnet, Inc. 20675 Manhattan Place, Torrance, CA 90501 Address
Signature
_________________________________ Name and Job Title.
: Wen Tsai / Sr. Product Manager E-mail Tel.
: w.tsai@trendnet.com
: 310-961-5500
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-11-26 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-11-26
|
||||
1 2 | Applicant's complete, legal business name |
TRENDNET, Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0019225663
|
||||
1 2 | Physical Address |
20675 Manhattan Place
|
||||
1 2 |
Torrance
|
|||||
1 2 |
Torrance, CA
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
XU8
|
||||
1 2 | Equipment Product Code |
TEW827DRU
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
W******** T******
|
||||
1 2 | Title |
Sr. Product Manager
|
||||
1 2 | Telephone Number |
310-9******** Extension:
|
||||
1 2 | Fax Number |
310-9********
|
||||
1 2 |
w******@trendnet.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
International Certification Corp.
|
||||
1 2 | Name |
G****** C********
|
||||
1 2 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-3********
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
G******@icertifi.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
International Certification Corp.
|
||||
1 2 | Name |
W****** L******
|
||||
1 2 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-3********
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
w******@icertifi.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC2600 StreamBoost TM MU-MIMO WiFi Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/ MHz bandwidth modes. | ||||
1 2 | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
International Certification Corp.
|
||||
1 2 | Name |
F**** C******
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
J******@icertifi.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.5460000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.409 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.333 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC