| submitted | available | document details (if available) | source link |
|---|---|---|---|
| test 3 Jonathan Microsoft® Word 2013 |
| various | User Manual | Users Manual | 1.87 MiB |
TRENDnet Users Guide Cover Page Table of Contents TRENDnet Users Guide Contents Product Overview ............................................................................ 1 Package Contents ........................................................................................................ 1 Features ...................................................................................................................... 1 Installing your Wireless Adapter ...................................................... 2 Windows OS Installation ........................................................................................... 2 Mac OS Installation ................................................................................................... 6 Connect to your wireless network using WPS ................................ 11 Windows OS ............................................................................................................ 11 WPS connection using the built in utility (Virtual Push Button) ............................. 11 Mac OS ................................................................................................................... 12 WPS connection using the built in utility (Virtual Push Button) ............................. 12 Technical Specifications ................................................................. 14 Troubleshooting ............................................................................ 15 Appendix ....................................................................................... 16 Copyright 2017 TRENDnet. All Rights Reserved. i TRENDnet Users Guide Product Overview TEW-648UBM Features TRENDnets Micro N150 Wireless USB Adapter, model TEW-648UBM, connects a laptop or desktop computer to a high-speed WiFi N network. Seamlessly stream video, download files, and play games with this ultra-compact wireless n adapter. WiFi Multimedia Quality of Service prioritizes important video, audio, and gaming traffic. Easy Setup Get up and running in minutes with the intuitive guided setup N150 WiFi Connect your laptop or computer to high-speed WiFi N150 to download files, play games, stream video, and more. Wireless Encryption Supports up to WPA2 encryption Ultra-Compact Design Micro design length is just over a quarter inch (7mm) Operating Systems Compatible with Windows and Mac operating systems TEW-648UBM Package Contents The package includes:
TEW-648UBM Micro N150 Wireless USB Adapter CD-ROM (Drivers and Users Guide) Quick Installation Guide If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased. Copyright 2017 TRENDnet. All Rights Reserved. 1 TRENDnet Users Guide Installing your Wireless Adapter This section describes how to install the software driver for the wireless adapter. Windows OS Installation Supported operating systems: Windows 10, 8.1, 8, 7, Vista, XP For any updates, please check the TRENDnet website www.trendnet.com. 1. Insert the included CD-ROM into your computers CD-ROM drive. Note: If you do not have the included CD-ROM, you can download the drivers from http://www.trendnet.com/support/. TEW-648UBM 2. At the CD Autorun Prompt window, click Run Autorun.exe. Note: If the Autorun prompt does not appear automatically, open the CD contents and double-click Autorun.exe. At the CD-ROM main menu, click Install Drivers. Note: During the installation, you might see these warning message, please select continue anyway to install the software.
(Windows 10) 2 Copyright 2017 TRENDnet. All Rights Reserved. TRENDnet Users Guide TEW-648UBM 3. Select a language preference from the options provided. 5. You will be prompted to accept the end user license agreement. Select I accept 4. Follow the InstallShield Wizard Instructions. Copyright 2017 TRENDnet. All Rights Reserved. the terms of the license agreement and click Next. 6. Wait for the driver installation to complete. This may take a few minutes. Note: If you do not receive a security prompt, continue to the next step. If prompted, click Install this driver software anyway. 3 TRENDnet Users Guide 7. Click Finish to restart the computer. TEW-648UBM Link/Activity LED Blinking On
: A steady blinking LED means that the network adapter has been successfully installed. Fast Blinking : When the LED is blinking fast, the network adapter is transmitting or receiving data. Off
: When the LED is off, the network adapter has not been correctly installed. 9. Click on the wireless icon in the taskbar located in the bottom right corner. 8. After the computer is rebooted, plug the Wireless N USB Adapter into an available USB slot on your computer. Copyright 2017 TRENDnet. All Rights Reserved. 4 TRENDnet Users Guide TEW-648UBM 10. Click on the wireless network you would like to connect and click Connect. 11. Enter the WiFi Key (password) and click Next. 12. The status will display Connected to indicate a successful connection. Note: If the connected message does not display, double check your WiFi key (password) and re-enter it. Copyright 2017 TRENDnet. All Rights Reserved. 5 TRENDnet Users Guide Mac OS Installation Supported operating systems: Mac OS 10.7-10.12 For any updates, please check the TRENDnet website www.trendnet.com. 1. Insert the included CD-ROM into your computers CD-ROM drive. Note: If you do not have the included CD-ROM, you can download the utility and drivers from http://www.trendnet.com/support/
3. Open the folder according to the Mac OS version you are running. For Mac OS 10.7-
10.12, the folder will be named Mac OS 10.7-10.12. TEW-648UBM 4. Double click the Installer.pkg file to start the installation. 2. Open the folder named Mac on the included Utility and Driver CD ROM. Copyright 2017 TRENDnet. All Rights Reserved. 6 TRENDnet Users Guide TEW-648UBM 5. At the Introduction window, click Continue. 6. At the Read Me window, click Continue. Copyright 2017 TRENDnet. All Rights Reserved. 7 TEW-648UBM TRENDnet Users Guide 7.At the License Agreement window, click Continue. 9.At the Install window, click Install. 8. When prompted, click Agree. Copyright 2017 TRENDnet. All Rights Reserved. 8 TRENDnet Users Guide TEW-648UBM 10. When prompted, enter your Mac user account password to authorize the install, click Install Software. 12. Once the installation is complete, you will be prompted to restart the computer. Click Restart to restart your computer. 11. When prompted, click Continue Installation. Copyright 2017 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide TEW-648UBM 13. After the computer is rebooted, plug the Wireless N USB Adapter into an available USB slot on your computer. 17. Enter the WiFi Key (password) and click Join. 15. After the driver is successfully installed and wireless adapter is connected, a wireless adapter icon will appear in the top menu bar. Click on the icon in the top menu bar. 16. A list of available wireless network will appear. Click on the wireless network you would like to connect. Copyright 2017 TRENDnet. All Rights Reserved. 18. The wireless adapter icon will change to green WiFi bars to indicate a successful connection. Note: If the connected message does not display, double check your WiFi key (password) and re-enter it. 10 2. Click the network you would like to connect. Leave this window open. TEW-648UBM TRENDnet Users Guide Connect to your wireless network using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless router/access point supports WPS, you can use this feature to easily connect wireless devices to your network. Note: You can typically find out if you if your wireless router/access point supports WPS just by looking at the physical device. There should be a WPS push button located on the exterior casing of the device, if not, your device may not support WPS or you may need to reference your device documentation as to how WPS can be initiated on the device. If your device does not have an identifiable WPS push button on the exterior location, we would recommend using the standard connection method on the previous page. Windows OS WPS connection using the built in utility (Virtual Push Button) 1. Click the WiFi icon in the system tray to scan for available wireless networks. 3. On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for WPS operation. Copyright 2017 TRENDnet. All Rights Reserved. 11 TRENDnet Users Guide TEW-648UBM Mac OS WPS connection using the built in utility (Virtual Push Button) 1 On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for WPS operation. 4. The status will display Connected to indicate a successful connection. Note: If the connected message does not display, double check your WiFi key (password) and re-enter it. 2. Click on the wireless adapter icon in the top menu bar. 3. Scroll to the bottom of the available wireless networks list and click the arrow at the bottom. Note: If the WPS process fails, you will receive not receive a message Connected. You may need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS. 4. After the additional menu opens, click on WPS. Copyright 2017 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide 5. In the WPS window, click PBC to activate WPS. 6. A series of status messages will appear. Wait for the WPS process to complete. 7. A status message will appear to indicate a successful connection. Note: If the WPS process fails, you will receive not receive a message Connected. You may need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS. Copyright 2017 TRENDnet. All Rights Reserved. TEW-648UBM 13 TEW-648UBM TRENDnet Users Guide Technical Specifications Interface USB 2.0 Standards IEEE 802.11b IEEE 802.11g IEEE 802.11n Power Consumption Receive: 90mA (max.) Transmit: 250mA (max.) Supported OS Windows 10 (32/64-bit), 8.1 (32/64-bit), 8 (32/64-bit), 7 (32/64-bit) Mac OS 10.7-10.12 Antenna Built-in on board antenna Frequency 2.4 ~ 2.48GHz Modulation OFDM, DSSS Data Rate 802.11b: up to 11Mbps 802.11g: up to 54Mbps 802.11n: up to 150Mbps Output Power 802.11b: 17 1.5dBm 802.11g: 15 1.5dBm 802.11n: 14 1.5dBm Receiving Sensitivity 802.11b: -81 2dBm at 11Mbps 802.11g: -71 2dBm at 54Mbps 802.11n: -65 2dBm at 150Mbps Encryption 64/128-bit WEP, WPA/WPA2-RADIUS, WPA-PSK/WPA2-PSK Channels 1~11 (FCC), 1~13 (ETSI) Temperature Operating: 0 ~ 40 C (32 - 104 F) Storage: -20 ~ 60 C (-4 140 F) Humidity Operating: 10 ~ 90% non-condensing Storage: Max 95% non-condensing Dimensions 17.5 x 15 x 7.3 mm (0.7 x 0.6 x 0.29 in.) Weight 1.98 g (.07 oz.) Certifications CE FCC Warranty 3 year limited Copyright 2017 TRENDnet. All Rights Reserved. 14 TRENDnet Users Guide Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?
Answer:
1. For Windows 10/8.1/8/7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the Search programs and files box, and type D:\Autorun.exe, where D in D:\Autorun.exe is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard 2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start Search box, and type D:\Autorun.exe where "D" in
"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. 3. For Windows XP, if the installation menu does not appear automatically, click Start, click Run, and type D:\Autorun where "D" in "D:\Autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. Q: I completed all the steps in the quick installation guide, but my Wireless USB Adapter is not connecting to my access point. What should I do?
Answer:
1. Verify that the SSID (Network Name) matches your wireless router or access point's SSID 2. Please check with your network administrator for security key in order to access a secured wireless access point or router. Please refer to the User's Guide for more information regarding wireless network security. 3. Check your TCP/IP properties to ensure that Obtain an IP address automatically is selected. 4. Double-click the Wireless Configuration Utility icon, click Available Networks and then click Refresh to check and see if there are any available wireless networks listed. Copyright 2017 TRENDnet. All Rights Reserved. TEW-648UBM Q: Windows is unable to recognize my hardware. What should I do?
Answer:
1. Make sure your computer meets the minimum requirements as specified in Section 1 of this quick installation guide. 2. You must complete the installation of the Wireless Configuration Utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. 3. Connect the Wireless USB Adapter to a different USB port on your computer. 15 TEW-648UBM TRENDnet Users Guide Appendix How to choose the type of security for your wireless network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router. There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware). It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.). WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11a or 802.11g hardware has been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. WPA-Auto: This setting provides the router with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. NOTE: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps In general, it is recommended that you choose the security type with the highest WPA2: This is the most secure wireless encryption available today, similar to strength and performance supported by the wireless computers and devices in your WPA encryption but more robust. This encryption standard also supports the network. Please review the security types to determine which one you should use for highest connection speeds. TRENDnet recommends setting your router to this your network. Wireless Encryption Types WEP: Legacy encryption method supported by older 802.11a/b/g hardware. This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b, 802.11g or 802.11a wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. Note: This encryption standard will limit connection speeds to 54Mbps. encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your router to either WPA or WPA-Auto encryption. Note: Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported. Copyright 2017 TRENDnet. All Rights Reserved. 16 TRENDnet Users Guide TEW-648UBM Open or Shared \ WEP Enter the WEP key for your wireless network. Wireless network has WEP security enabled, open or shared. Please note that the Key Index 1-4 must also match the same index configured on the wireless router/access point. WEP Key Format HEX ASCII Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.) How to find your IP address?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. 64-bit key length 10 characters 5 characters 128-bit key length 26 characters 13 characters WPA/WPA2-PSK/TKIP or AES Wireless network has WPA/WPA2-PSK security enabled, TKIP or AES. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. Security Standard WEP WPA WPA2 IEEE 802.11a/b/g
(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g
(802.11n/ac devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g/n/ac Command Prompt Method Windows XP/Vista/7/8/8.1/10 1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box. 2. In the dialog box, type cmd to bring up the command prompt. 3. In the command prompt, type ipconfig /all to display your IP address settings. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to configure your network settings to obtain an IP address automatically or use DHCP?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Up to 54Mbps Up to 54Mbps Up to 150Mbps 11n*
Windows 10/8.1/8/7 Low Open System or Shared Key, HEX or ASCII, Different key sizes Open System ASCII 13 characters Medium High TKIP or AES, Preshared Key or RADIUS TKIP or AES, Preshared Key or RADIUS TKIP Preshared Key 8-63 characters AES Preshared Key 8-63 characters a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK. Windows Vista a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Recommended Configuration Copyright 2017 TRENDnet. All Rights Reserved. 17 TRENDnet Users Guide TEW-648UBM d. Then click Obtain an IP address automatically and click OK. Windows XP Windows XP a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to connect to a wireless network using the built-in Windows utility?
Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility. Windows 10/8.1/8/7 1. Open Connect to a Network by clicking the network icon (
area. or
) in the notification 2. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows Vista 1. Open Connect to a Network by clicking the Start Button. To. and then click Connect 2. In the Show list, click Wireless. 3. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Copyright 2017 TRENDnet. All Rights Reserved. 1. Right-click the network icon in the notification area, then click View Available Wireless Networks. 2. In Connect to a Network, under Available Networks, click the wireless network you would like to connect to. 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. 18 TRENDnet Users Guide TEW-648UBM Federal Communication Commission Interference Statement RoHS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product is RoHS compliant. Europe EU Declaration of Conformity TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. EMC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EN 301489-1 V2.2.0 (2017-03) EN 301489-17 V3.2.0 (2017-03) IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Radio Spectrum & Health EN 300 328 V2.1.1 (2016-11) EN 62311:2008 Directives:
EMC Directive 2014/30/EU REACH Regulation (EC) No. 1907/2006 Ecodesign Directive 2009/125/EU RoHS Directive 2011/65/EU Radio Equipment Directive (RED) 2014/53/EU Low Voltage Directive 2014/35/EU WEEE Directive 2012/19/EU Copyright 2017 TRENDnet. All Rights Reserved. 19 CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. TRENDnet Users Guide Limited Warranty TRENDnet warrants only to the original purchaser of this product from a TRENDnet Limited Warranty In the event that, after evaluation, TRENDnet cannot replace the defective product or there is no comparable model available, we will refund the depreciated value of the product. authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service. This limited warranty is non-
If a product does not operate as warranted during the applicable warranty period, transferable and does not apply to any purchaser who bought the product from a TRENDnet shall reserve the right, at its expense, to repair or replace the defective reseller or distributor not authorized by TRENDnet, including but not limited to product or part and deliver an equivalent product or part to the customer. The purchases from Internet auction sites. Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of the respective product pages on the TRENDnet website. AC/DC Power Adapter, Cooling Fan, and Power Supply carry a one-year warranty. Limited Lifetime Warranty TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year warranty To obtain an RMA, the ORIGINAL PURCHASER must show Proof of Purchase and return the unit to the address provided. The customer is responsible for any shipping-related costs that may occur. Replacement goods will be shipped back to the customer at TRENDnets expense. Upon receiving the RMA unit, TRENDnet may repair the unit using refurbished parts. In the event that the RMA unit needs to be replaced, TRENDnet may replace it with a refurbished product of the same or comparable model. Copyright 2017 TRENDnet. All Rights Reserved. repair/replacement unit's warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use, or (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation, a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. International customers 20 TRENDnet Users Guide Limited Warranty shipping from outside of the USA and Canada are responsible for any return shipping LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, TRENDNET ALSO and/or customs charges, including but not limited to, duty, tax, and other fees. EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN Refurbished product: Refurbished products carry a 90-day warranty after date of purchase. Please retain the dated sales receipt with purchase price clearly visible as evidence of the original purchaser's date of purchase. Replacement products may be refurbished or contain refurbished materials. If TRENDnet, by its sole determination, is unable to replace the defective product, we will offer a refund for the depreciated value of the product. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some TRENDnet products include software code written by third party developers. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR These codes are subject to the GNU General Public License ("GPL") or GNU Lesser IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, General Public License ("LGPL"). MAINTENANCE, OR USE OF TRENDNET'S PRODUCTS. Visit http://www.trendnet.com/gpl or the support section on TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND http://www.trendnet.com and search for the desired TRENDnet product to access to EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, subject to the copyrights of the developers. TRENDnet does not provide technical IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR support for these codes. Please visit http://www.gnu.org/licenses/gpl.txt or MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. Copyright 2017 TRENDnet. All Rights Reserved. http://www.gnu.org/licenses/lgpl.txt for specific terms of each license. 2017/06/24 21
This product uses the FCC Data API but is not endorsed or certified by the FCC