| submitted | available | document details (if available) | source link |
|---|---|---|---|
| TEW-750DAP_User manual_20130614_Momokox JESSIE AFPL Ghostscript 8.54 |
| various | User Manual | Users Manual | 2.18 MiB |
TRENDnet Users Guide Cover Page TEW-750DAP Users Guide TRENDnet Users Guide Contents Product Overview .......................................................................... 2 Package Contents .......................................................................................... 2 Features ......................................................................................................... 2 Product Hardware Features ............................................................................ 3 Installation ..................................................................................... 4 Wireless Performance Considerations ............................................................ 4 Hardware Installation ...................................................................................... 5 Configuration ................................................................................. 5 Log in the Web-based Management ............................................................... 5 Main > Wizard ................................................................................................ 6 Main > LAN .................................................................................................... 7 LAN Connection Type Static IP ................................................................ 8 Main > Password ............................................................................................ 9 Main > Time ................................................................................................. 10 Main > IPv6 .................................................................................................. 11 IPv6 Connection Type Static IPv6 .......................................................... 11 IPv6 Connection Type Auto-configuration (SLAAC/DHCPv6) ................. 12 IPv6 Connection Type Link-local Only .................................................... 12 Wireless > Basic ........................................................................................... 12 Wireless Network Settings 2.4GHz Band ............................................... 13 Wireless Mode WDS .............................................................................. 14 Wireless Mode WDS+AP ....................................................................... 14 Wireless Security Mode ............................................................................ 14 Wireless Security Mode None ................................................................ 14 Wireless Security Mode WEP ................................................................ 15 Wireless Security Mode WPA-Personal ................................................. 15 Wireless Security Mode WPA-Enterprise ............................................... 16 Copyright 2013 TRENDnet. All Rights Reserved. Table of Contents Wireless Network Settings 5GHz Band .................................................. 17 Wireless Mode WDS ............................................................................. 17 Wireless Mode WDS+AP ...................................................................... 17 Wireless Security Mode None ............................................................... 18 Wireless Security Mode WEP ................................................................ 18 Wireless Security Mode WPA-Personal ................................................. 18 Wireless > Advanced ................................................................................... 19 Wireless > Wi-Fi Protected Setup ................................................................. 19 Status > Device Information ......................................................................... 22 Status > Log ................................................................................................ 23 Status > Statistic .......................................................................................... 23 Status > Wireless ......................................................................................... 24 Status > IPv6 ............................................................................................... 24 Access > MAC Filters ................................................................................... 25 Access > Guest Zone ................................................................................... 26 Access > Advanced Network ........................................................................ 26 Tools > Restart ............................................................................................ 27 Tools > Firmware ......................................................................................... 27 Tools > Ping Test ......................................................................................... 28 Tools > Email Settings ................................................................................. 28 Tools > Syslog ............................................................................................. 29 Tools > Schedules ....................................................................................... 29 Networking Basics ...................................................................... 30 Wireless Basics ........................................................................... 31 Wireless Security ......................................................................... 32 Technical Specifications ............................................................. 33 i Features TRENDnet TEW-750DAP Dual Band Wireless AP produces the ultimate wireless experience with up to 300Mbps for the 802.11n wireless connection. TEW750DAP 4 x 10/100Mbps Auto-MDIX LAN ports 1 x Wi-Fi Protected Setup (WPS) button On / Off power switch Compliant with IEEE 802.11a/b/g Compliant with IEEE 802.11n 2.0 Compliant with IEEE 802.3 and 802.3u One touch wireless connection using the WPS button Easy setup via Web browser User-friendly Setup Wizard TRENDnet Users Guide Product Overview Package Contents The package includes:
TEW-750DAP Wireless Access Point (AP) CD-ROM (Utility & Users Guide) Multi-language Quick Installation Guide Network cable (1.5m / 5ft) Power adapter (DC12V, 1A) If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased. Copyright 2013 TRENDnet. All Rights Reserved. 2 Reset Button Press and hold this button for 10 seconds to reset your AP TEW750DAP to default settings. WPS Button Push and hold this button for 5 seconds to activate WPS. LAN Ports Connect Ethernet cables (also called network cables) from your AP LAN ports to your wired network devices. Power Port Connect the included power adapter from your AP power port and to an available power outlet. Note: Use only the adapter that came with the AP. ON/OFF Button Press the button to power on and off. TRENDnet Users Guide Product Hardware Features Rear Panel View WPS Button Power Port Reset Button LAN Ports ON/OFF Button Copyright 2013 TRENDnet. All Rights Reserved. 3 TRENDnet Users Guide Front Panel View WPS LED Wireless LAN LED LAN LEDs Power LED LAN LEDs This indicator lights when there is a connection on the port. Power LED - This indicator lights on when the AP is powered on. TEW750DAP Installation Placement of the AP is very important. Do not place the AP in an enclosed area such as a closet, cabinet, or in the attic or garage. Wireless Performance Considerations The wireless AP allows you to access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the AP and other network devices to a minimum - each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet
(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless APs, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 5. WPS LED This indicator is turned on and blinks when WPS is activated. The LED will turn off automatically once WPS is completed. Wireless LAN LED This indicator lights on when the link is established. The indicator blinks when there is data transmission. Copyright 2013 TRENDnet. All Rights Reserved. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. 4 TRENDnet Users Guide Hardware Installation 1. Position your AP close to your computer. Place the AP in an open area of your intended work area for better wireless coverage. 2. Plug one end of the included blue Ethernet cable that came with your AP TEW750DAP 3. The window displays the wireless settings of the AP. The user can print out or write down the information for Wi-Fi settings. Click Save to implement the changes and continue. into one of the four Ethernet ports on the back of the AP. Plug the other end of this cable into the Ethernet port of your PC. 3. Connect the supplied power adapter into the power port on the back of the AP and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the AP to boot up. Configuration Log in the Web-based Management 1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and go to http://192.168.10.100. Your AP will prompt you for a user name and password. 4. The AP is saving the settings. 2. When entering the user interface at the first time, the AP requests the user to change the password. It is highly recommended to change to a new password. Enter the new password in the Password and Verify Password field, and click Next. If the user does not change the password, the default password is admin. Copyright 2013 TRENDnet. All Rights Reserved. 5 TRENDnet Users Guide 5. After first-time, you will see the following login window when log in the AP. Enter the default user name and password and then click Login. If you changed the password in first-time login, enter the new password you set. Default User Name: admin Default Password: admin Main > Wizard The wizard displays the information of wireless connection. Click Exit to finish the configuration. TEW750DAP 6. The main window appears. You can configure the AP by using the Setup Wizard or detail manual configuration. Copyright 2013 TRENDnet. All Rights Reserved. 6 TRENDnet Users Guide Main > LAN This window allows you to configure the local network settings and DHCP settings. TEW750DAP LAN Connection Type My LAN Connection is: Use the drop-down list to select the LAN connection type. The available types are Static IP and Dynamic IP (DHCP). When selecting Static IP, the user need to manually configure the APs network settings. When selecting Dynamic IP (DHCP), the AP will automatically obtain the network settings from an existing DHCP server on the network. Copyright 2013 TRENDnet. All Rights Reserved. 7 TRENDnet Users Guide LAN Connection Type Static IP Copyright 2013 TRENDnet. All Rights Reserved. TEW750DAP After selecting Static IP from the My LAN Connection is drop-down list, the following parameters will be available to be configured. IP Address: Enter the IP address of the AP. This IP address must be within your local network address range. Subnet Mask: Enter the Subnet Mask of the AP. Default Gateway: Enter the Gateway IP address. This is normally the local IP address of the Internet gateway within the network. Primary DNS Server: Enter the primary Domain Name System (DNS) server IP address that is supplied by your ISP. Secondary DNS Server: Enter the secondary DNS server IP address that is supplied by your ISP. DHCP Server Settings Enable DHCP Server: When enabling this feature, the AP will host the DHCP server on the network. DHCP IP Address Range: Enter the starting and ending IP address for the DHCP servers IP assignment. Default Subnet Mask: Enter the subnet mask of the IP address. Default Gateway: Enter the default gateway for DHCP server. Default WINS: Enter the default Windows Internet Name Servers (WINS) address. Default DNS: Enter the default DNS server address. DHCP Lease Time: The length of time for the IP address lease. Enter the time in minutes. Always Broadcast: If all the computers on the LAN successfully obtain their IP addresses from the routers DHCP server as expected, this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address from the routers DHCP server, it may have an old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at the cost of increased broadcast traffic on the LAN. Add DHCP Reservation Enable: Tick the check box to enable the reservation. Computer Name: Enter the computer name or select from the drop-down menu and click <<. 8 TRENDnet Users Guide IP Address: Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address: Enter the MAC address of the computer or device. Clone Your PCs MAC Address: If you want to assign an IP address to the computer you are currently on, click this button to populate the fields. Click the Add / Update button to save the entry. Click the Clear button to delete all the information in this section. DHCP Reservation List This section displays the reservation entries. The entries include host name, IP address and MAC address. Tick the Enable check box of the corresponding entry to enable the reservation. Click the button box of the corresponding button of the corresponding entry to entry to modify the entry. Click the remove the entry. Number of Dynamic DHCP Clients This section displays the available DHCP clients. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Main > Password This window allows you to change the Administrator password. You can also enable Remote Management. TEW750DAP Admin Password Password: Enter a password for the administrator login. Verify Password: Re-type the administrator password. System Name Gateway Name: Enter a name for the AP. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Copyright 2013 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide Main > Time This window allows you to configure, update, and maintain the correct time on the internal system clock. You can set the time zone that you are in and set the Time Server. Daylight saving can also be configured to automatically adjust the time when needed. TEW750DAP Enable Daylight Saving: Tick the check box to enable the daylight saving when your local time has daylight saving. Daylight Saving Offset: Use the drop-down menu to select the daylight savings offset from standard time. Daylight Saving Dates: Use the drop-down menu to select the start and end date for daylight saving time. Automatic Time and Date Configuration Automatically synchronize with Internet time server: Tick the check box to automatically synchronize the APs time with a NTP server. NTP Server Used: Enter the IP address of a NTP server that the AP synchronizes the time with. Click the Update Now button to connect to the NTP server and synchronize the time. Set the Time and Date Manually In this section, you can manually select the specific time for the AP. Use the drop-down menus of Year, Month, Day, Hour, Minute and Second to configure the APs time. You can also click the Synchronize with Your Computers Time Settings button to have the APs time the same as your local computer. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Time and Date Configuration Time: Displays the current date and time of the AP Time Zone: Select your time zone from the drop-down menu. Copyright 2013 TRENDnet. All Rights Reserved. 10 TRENDnet Users Guide Main > IPv6 This window allows you to configure the IPv6 connection. The available IPv6 connection are Static IPv6, Auto-configuration (SLAAC/DHCPv6), and Link-
local Only. IPv6 Connection Type Static IPv6 TEW750DAP LAN IPv6 Address Settings IPv6 Address: Enter the IPv6 address of the AP. Subnet Prefix Length: Enter the subnet prefix length. Default Gateway: Enter the default gateway IPv6 address. Primary DNS Server: Enter the primary IPv6 DNS server address. Secondary DNS Server: Enter the secondary IPv6 DNS server address. Copyright 2013 TRENDnet. All Rights Reserved. 11 TRENDnet Users Guide IPv6 Connection Type Auto-configuration (SLAAC/DHCPv6) IPv6 Connection Type Link-local Only TEW750DAP IPv6 DNS Settings Obtain IPv6 DNS Servers automatically: Allows the AP to automatically obtain IPv6 DNS server IP addresses. Use the following IPv6 DNS Servers: Manually enters the IPv6 DNS server IP addresses. Primary DNS Server: Enter the primary IPv6 DNS server address. This field is only available when Use the following IPv6 DNS Servers is selected. Secondary DNS Server: Enter the secondary IPv6 DNS server address. This field is only available when Use the following IPv6 DNS Servers is selected. LAN IPv6 Address Settings LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local address. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Wireless > Basic This window allows you to set up wireless settings of the AP. Copyright 2013 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide Wireless Network Settings 2.4GHz Band TEW750DAP Wireless Band: This displays the wireless band that the AP is used. Enable Wireless: Tick the check box to enable the wireless feature for the 2.4GHz band on this AP. Use the drop-down menu to apply a time schedule to this wireless network. Mode: Use the drop-down menu to select the wireless mode. Available options are AP, WDS, and WDS+AP. Wireless Network Name: Enter the wireless network name (SSID). This name will be available when wireless clients scan for available wireless networks. However, when Visibility Status is set to Invisible, this name will not be visible to wireless clients. 13 Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet Users Guide 802.11 Mode: Select which 802.11 wireless modes to use from the drop-down menu. Options to choose from are 802.11b only, 802.11g only, 802.11n only, Mixed 802.11g and 802.11b, Mixed 802.11n and 802.11g, and Mixed 802.11n, 802.11g and 802.11b. If you are not sure, select Mixed 802.11n, 802.11g and 802.11b. Enable Auto Channel Scan: Tick the check box to allow the AP to find and use the wireless channel with the least interference in your environment. Wireless Channel: Deselect Enable Auto Channel Scan to be able to configure this. Use the drop-down menu to select a wireless channel. Transmission Rate: Select the wireless transmission rate. It is advisable to keep this option on Best (Automatic). Channel Width: Select the wireless channel width used. Options to choose from are 20MHz and 20/40MHz (Auto). Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal it. WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Wireless Mode WDS When selecting WDS in the Mode drop-down menu, the following section appears. TEW750DAP Enable Lazy Mode: Tick the check box to enable the Lazy mode. When enabling the Lazy mode, there is no need to enter the MAC address of any remote AP. Remote AP MAC Address: Enter the MAC address of a remote AP. Click the radio button to select the corresponding AP and Connect to have the APs MAC address in the field. Wireless Security Mode This section allows you to select various wireless security modes for the 2.4GHz band. The corresponding configuration will then appear at the bottom half of the window. Available options are None, WEP, WPA-Personal and WPA-
Enterprise. Wireless Security Mode None Remote AP MAC Address: Enter the MAC address of a remote AP. Click the Site Survey button to see the available AP in the area. Click the radio button to select the corresponding AP and Connect to have the APs MAC address in the field. Wireless Mode WDS+AP When selecting WDS+AP in the Mode drop-down menu, the following section appears. By selecting this mode, there will be no wireless security applied to your wireless network. This means that anyone with a wireless adapter can connect to your network. Copyright 2013 TRENDnet. All Rights Reserved. 14 TRENDnet Users Guide Wireless Security Mode WEP Wired Equivalent Privacy (WEP) is any entry level wireless security method that we can use to prevent unauthorized wireless access to this AP. WEP is not a very secure option, but it is better than no wireless security. TEW750DAP Wireless Security Mode WPA-Personal Wi-Fi Protected Access (WPA) is a more advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected Access (WPA2) is the most advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. WPA Personal does not require an authentication server. WEP Key Length: Select the WEP Key Length value as 64 bit (10 hex digits) or 128 bit (26 hex digits). Authentication: Select the WEP authentication option. Options to choose from are Both and Shared Key. WEP Key: Enter a wireless security key here. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only. Cipher Type: Select the wireless cipher type here. Options to choose from are TKIP and AES, TKIP, and AES. Group Key Update Interval: Enter the group key update interval time in seconds. Pre-shared Key Pre-shared Key: Enter the WPA-Personal wireless Pre-Shared Key. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. 15 Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet Users Guide Wireless Security Mode WPA-Enterprise Wi-Fi Protected Access (WPA) is a more advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected Access (WPA2) is the most advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. WPA-Enterprise requires the use of an external RADIUS server. TEW750DAP EAP RADIUS Server IP Address: Enter the IP address of the external RADIUS server. RADIUS Server Port: Enter the external RADIUS server port number. RADIUS Server Shared Secret: Enter the RADIUS server shared secret. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. Advance Setting: Click the Advanced >> button to configure settings for an optional secondary RADIUS server. Second RADIUS Server IP Address: Enter the IP address of the external RADIUS server. Second RADIUS Server Port: Enter the external RADIUS server port number. Second RADIUS Server Shared Secret: Enter the RADIUS server shared secret. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only. Cipher Type: Select the wireless cipher type here. Options to choose from are TKIP and AES, TKIP, and AES. Group Key Update Interval: Enter the group key update interval time in seconds. Copyright 2013 TRENDnet. All Rights Reserved. 16 TRENDnet Users Guide Wireless Network Settings 5GHz Band Wireless Band: This displays the wireless band that the AP is used. Enable Wireless: Tick the check box to enable the wireless feature for the 5GHz band on this AP. Use the drop-down menu to apply a time schedule to this wireless network. Mode: Use the drop-down menu to select the wireless mode. Available options are AP, WDS, and WDS+AP. Wireless Network Name: Enter the wireless network name (SSID). This name will be available when wireless clients scan for available wireless networks. However, when Visibility Status is set to Invisible, this name will not be visible to wireless clients. 802.11 Mode: Select which 802.11 wireless modes to use from the drop-down menu. Options to choose from are 802.11a only, 802.11n only, and Mixed 802.11a and 802.11n. If you are not sure, select Mixed 802.11a and 802.11n. Copyright 2013 TRENDnet. All Rights Reserved. TEW750DAP Enable Auto Channel Scan: Tick the check box to allow the AP to find and use the wireless channel with the least interference in your environment. Wireless Channel: Deselect Enable Auto Channel Scan to be able to configure this. Use the drop-down menu to select a wireless channel. Transmission Rate: Select the wireless transmission rate. It is advisable to keep this option on Best (Automatic). Channel Width: Select the wireless channel width used. Options to choose from are 20MHz and 20/40MHz (Auto). Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal it. WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Wireless Mode WDS When selecting WDS in the Mode drop-down menu, the following section appears. Remote AP MAC Address: Enter the MAC address of a remote AP. Click the radio button to select the corresponding AP and Connect to have the APs MAC address in the field. Wireless Mode WDS+AP When selecting WDS+AP in the Mode drop-down menu, the following section appears. Enable Lazy Mode: Tick the check box to enable the Lazy mode. When enabling the Lazy mode, there is no need to enter the MAC address of any remote AP. 17 TRENDnet Users Guide Remote AP MAC Address: Enter the MAC address of a remote AP. Click the radio button to select the corresponding AP and Connect to have the APs MAC address in the field. Wireless Security Mode This section allows you to select various wireless security modes for the 5GHz band. The corresponding configuration will then appear at the bottom half of the window. Available options are None, WEP, WPA-Personal and WPA-
Enterprise. Wireless Security Mode None TEW750DAP Authentication: Select the WEP authentication option. Options to choose from are Both and Shared Key. WEP Key: Enter a wireless security key here. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. Wireless Security Mode WPA-Personal Wi-Fi Protected Access (WPA) is a more advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected Access (WPA2) is the most advanced wireless security method that we can use to prevent unauthorized wireless access to this AP. WPA Personal does not require an authentication server. By selecting this mode, there will be no wireless security applied to your wireless network. This means that anyone with a wireless adapter can connect to your network. Wireless Security Mode WEP Wired Equivalent Privacy (WEP) is any entry level wireless security method that we can use to prevent unauthorized wireless access to this AP. WEP is not a very secure option, but it is better than no wireless security. WEP Key Length: Select the WEP Key Length value as 64 bit (10 hex digits) or 128 bit (26 hex digits). Copyright 2013 TRENDnet. All Rights Reserved. WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only. Cipher Type: Select the wireless cipher type here. Options to choose from are TKIP and AES, TKIP, and AES. Group Key Update Interval: Enter the group key update interval time in seconds. 18 TRENDnet Users Guide Pre-shared Key Pre-shared Key: Enter the WPA-Personal wireless Pre-Shared Key. This key must be configured on all the wireless clients for them to be able to connect to your wireless network. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Wireless > Advanced This window is used to configure more advanced wireless settings on the AP. TEW750DAP Beacon Period: Enter the duration between beacon packets in milliseconds. Preamble Type: Click to select Short Preamble or Long Preamble. DTIM Interval: Enter a Delivery Traffic Indication Message interval. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Wireless > Wi-Fi Protected Setup This window is used to configure the Wi-Fi Protected Setup (WPS) settings on the AP. Wireless Band: Displays the wireless band that can be configured. Transmit Power: Select the wireless transmit power for the 2.4GHz band. Options to choose from are 100%, 50%, 25% and 12.5%. Wi-Fi Protected Setup Enable: Tick the check box to enable the Wi-Fi Protected Setup (WPS) feature. Wi-Fi Protected Setup: Displays the status of the WPS feature. Copyright 2013 TRENDnet. All Rights Reserved. 19 TRENDnet Users Guide Lock WPS-PIN Setup: Un-tick the check box to unlock the WPS-PIN setup when the WPS-PIN setup is locked. PIN Settings PIN: Displays the WPS PIN. Reset PIN to Default/Generate New PIN: Click the Reset PIN to Default button to to clear the PIN number used. Click the Generate New PIN button to generate a new WPS PIN. Add Wireless Station Connect your Wireless Device: Click the Connect button to initiate the Wi-Fi Protected Setup (WPS) setup wizard. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. When clicking the Connect button in the Add Wireless Station section, the following window appears. TEW750DAP Auto: Select this option to automatically allow the AP and the wireless client to connect to each other by means of WPS. Manual: Select this option to display the configured wireless settings. This information can then be configured of the wireless clients manually to initiate a wireless connection. Click the Next button to continue to the next step. Click the Cancel button to discard the changes made and return to the main menu. Step 2: Connect your Wireless Device After selecting the Auto radio button in Step 1, the window will be available. Step 1: Select Configuration Method for your Wireless Network Copyright 2013 TRENDnet. All Rights Reserved. 20 TRENDnet Users Guide PIN: Select this option to use the Personal Identification Number (PIN) method to connect the two devices. Enter the PIN number here. Enter the same PIN number at the wireless client software. PBC: Select this option to use the Push Button Configuration (PBC) method to connect the two devices. Click the Connect button to initiate the WPS connection. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main menu. Select the PIN radio button, enter the PIN the PIN field, and click the Connect button in Step 2, the following window will be available. The AP will allow 120 seconds for the WPS connection to initiate. After successfully connecting the AP and the wireless client, by means of WPS, the following window will be available. TEW750DAP Click the Cancel button to finish the setup and return to the main menu. Click the Wireless Status button to view information about wireless clients connected to the AP. After selecting the Manual radio button in Step 1, the window will be available. Select the PBC radio button, and click the Connect button in Step 2, the following window will be available. Press the WPS button on the wireless client to initiate the connection within 120 seconds. This information can then be configured of the wireless clients manually to initiate a wireless connection. Click the Prev button to return to the previous step. Click the Cancel button to finish the setup and return to the main menu. Click the Wireless Status button to view information about wireless clients connected to the AP. 21 Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet Users Guide After clicking the Wireless Status button, the following window appears. TEW750DAP Status > Device Information This window displays the detail information about the AP. You can view General, Ethernet, and Wireless LAN information. Copyright 2013 TRENDnet. All Rights Reserved. 22 TRENDnet Users Guide Status > Log This window allows you to view and configure the system log settings for this AP. Save Log File You can initiate the saving of the log file to the management computer. Click the Save button to download the log file to the management computer. Log Type & Level This section allows you to configure the log type and level. Log Type: Select the log type to be displayed. Available options are System, Security, and AP Status. Log Level: Select the log level to be displayed. Available options are Critical, Warning, and Information. Log Files The system log is displayed in the section. Click the First Page button to view the first page. Click the Last Page button to view the last page. Click the Previous button to view the previous page. Click the Next button to view the next page. Click the Clear button to the log. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. TEW750DAP Status > Statistic This window displays the LAN, and Wireless interface statistics for the AP. Copyright 2013 TRENDnet. All Rights Reserved. 23 TRENDnet Users Guide Status > Wireless This window displays a list of wireless clients connected to the AP. TEW750DAP Click the Refresh Statistics button to refresh the information on this page. Click the Reset Statistics button to clear the information on the page. Status > IPv6 This window displays the detail IPv6 network information. Copyright 2013 TRENDnet. All Rights Reserved. 24 TRENDnet Users Guide Access > MAC Filters This window allows you to configure the MAC address filter. The rules can be set up to 24 entries. TEW750DAP enable this feature and only deny the computers, by MAC address, access to the network. Checkbox: Tick the check box of each entry to enable the selected rule. MAC Address: Enter the MAC address to be filtered. DHCP Client List: Select the DHCP client from the drop-down menu to be filtered. Schedule: Select the time schedule for the rule. Click the New Schedule button to create time schedules. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Configure MAC Filtering below: Select the MAC filtering method. Select Turn MAC Filtering OFF to disable this feature. Select Turn MAC Filtering ON and ALLOW computers listed to access the network to enable this feature and only allow the computers, by MAC address, to access the network. Select Turn MAC Filtering ON and DENY computers listed to access the network to Copyright 2013 TRENDnet. All Rights Reserved. 25 TRENDnet Users Guide Access > Guest Zone This window allows you to create temporary zones that can be used by guests to access the Internet. The guest zone will be separated from your main wireless network. TEW750DAP Wireless Network Name: Enter a wireless network name (SSID) that is different from your main wireless network. Enable Routing Between Zones: Check to allow network connectivity between the different zones created. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. Refer to Wireless > Basic > Wireless Security Mode for configuring the wireless security mode. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Access > Advanced Network This window is used to configure more advanced network settings on the AP. Guest Zone Enable Routing Between Zones: Tick the check box to allow the routing between zones. Wireless Band: Displays the wireless band. Enable Guest Zone: Tick the check box to enable the Guest Zone feature, and use the drop-down menu to select the time schedule or click the New Schedule button to create time schedules. Copyright 2013 TRENDnet. All Rights Reserved. Wireless Enhanced Mode: Tick the check box to enable wireless enhanced mode. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. 26 TRENDnet Users Guide Tools > Restart This window is used to save and restore the configuration, and restart the AP. Tools > Firmware This window is used to display the current firmware information and initiate a firmware upgrade for the AP. TEW750DAP Save Settings to Local Hard Drive: Click the Save Configuration button to download the APs settings to the management computers. Load Settings From Local Hard Drive: Click the Browse button to navigate to the saved configuration file on the management computer and click the Restore button to restore the APs configuration to the settings configured on the configuration file. Restore To Factory Default Settings: Click the Restore Factory Defaults button to remove all the settings configured on this AP and return the settings to the factory defaults. Reboot The Device: Click the Reboot the Device button to reboot the AP. All unsaved configurations will be discarded. Upload: Click the Browse button to navigate to the new firmware file located on the management computers, and click the Upload button to initiate the firmware upgrade procedure. The firmware upgrades sometimes will reset the configuration to the factory defaults. Make sure to save the current configuration to the management computer, before performing firmware upgrade. Copyright 2013 TRENDnet. All Rights Reserved. 27 TRENDnet Users Guide Tools > Ping Test This window is used to initiate a ping test to IPv4 and IPv6 address. Tools > Email Settings This window allows you to configure the e-mail settings for the AP to send the notification to the e-mail account. TEW750DAP Ping Test Host Name or IP Address: Enter the IPv4 address or host name of the target in the text box and click the Ping button to initiate the Ping test. IPv6 Ping Test Host Name or IPv6 Address: Enter the IPv6 address or host name of the target in the text box and click the Ping button to initiate the Ping test. Ping Result The ping result will display in this section. Copyright 2013 TRENDnet. All Rights Reserved. Email Notification Enable Email Notification: Tick the check box to enable the email notification feature. Email Settings From Email Address: Enter the senders email address. 28 Tools > Schedules This window is used to configure the time and date schedules. The configured schedule can be applied to various functions. TEW750DAP TRENDnet Users Guide To Email Address: Enter the recipients email address. Email Subject: Enter the emails subject information. SMTP Server Address: Enter the SMTP servers IP address. SMTP Server Port: Enter the SMTP servers port number. Enable Authentication: Tick the check box to enable SMTP authentication. Account Name: Enter the email account username. Password: Enter the email account password. Verify Password: Re-type the email account password. Email Log when Full Enable Log When Full: Tick the check box to send out an email when the log space is close to depletion. Click the Save Settings button to accept the changes made. Click the Dont Save Settings button to discard the changes made. Tools > Syslog The AP keeps a running log of events and activities occurring on the AP. You may send these logs to a SysLog server on your network. Name: Enter the name for the time and date schedule. Days(s): Click the All Week radio button to use all the weekdays for this schedule. Click the Select Day(s) radio button to use only the selected days in the week. Select Day(s): When the Select Day(s) radio button is selected, tick the check box to select which day of the week to be used. All Day 24 hrs: Tick the check box to use all the hours in a day. Time Format: Select the time format. Options to choose from are 12-hour and 24-hour. Start Time: Enter the starting time of a day. End Time: Enter the ending time of a day. Click the Add button to add this schedule into the schedule rules list. Click the Cancel button to discard the changes made. 29 Enable Logging to SysLog Server: Tick the box to send the AP logs to a SysLog Server. Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet Users Guide Networking Basics After you installed your new network or wireless adapter, by default, the TCP/IP settings should be set to obtain an IP address automatically from a DHCP server. By default the DHCP server option on your AP is enabled. To verify your IP address, please follow the steps below:
In the Open check box, type cmd and click OK. Click the Windows Start button and open the Run application. At the command prompt, type in the command ipconfig and press Enter. This will display the IP address, Subnet Mask, and the Default Gateway of your adapter. If the address is 0.0.0.0, it means that your network adapter did not receive an IP address from the DHCP server. Check your adapter installation, security settings, and the settings on your AP. Some firewall software programs may block a DHCP request on newly installed adapters. TEW750DAP Click the Windows Start button and navigate to the Control Panel >
Network and Sharing Center and click the Change Adapter Settings option on the left panel. Right-click the Local Area Connection, which represents your network adapter, and select Properties. Select the Internet Protocol Version 4 (TCP/IPv4) option and click the Properties button. Select Use the following IP address and enter an IP address that is on the same subnet as your AP. For example: If your AP is running on the IP address of 192.168.10.100, use any IP address from 192.168.10.1 to 192.168.10.99, or 192.168.10.101 to 192.168.10.254. Use the Subnet Mask of 255.255.255.0. Set Default Gateway the same as the LAN IP address of your AP. Set Preferred DNS server IP address the same as the LAN IP address of your AP. The Secondary DNS is not needed at this stage. Click the OK button twice to return to the Network Connections window. Statically Assign an IP address If you are not using a DHCP capable gateway/AP, or you need to assign a static IP address, please follow the steps below:
Copyright 2013 TRENDnet. All Rights Reserved. 30 TRENDnet Users Guide Wireless Basics Wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless AP is a device used to provide this link. What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. How does Wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Copyright 2013 TRENDnet. All Rights Reserved. TEW750DAP Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology has become so popular in recent years that almost everyone is using it, whether its for home, office, business, we have a wireless solution for it. Home Gives everyone at home broadband access. Surf the web, check email, instant message, etc. Gets rid of the cables around the house. Simple and easy to use. Small Office and Home Office Stay on top of everything at home as you would at office. Remotely access your office network from home. Share Internet connection and printer with multiple computers. No need to dedicate office space. Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and its becoming so popular that more and more 31 TRENDnet Users Guide public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a Wireless Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your AP or Access Point Make sure you place the AP/access point in a centralized location within your network for the best performance. Try to place the AP/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the AP/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the AP. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless AP. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more wireless network Cardbus adapters. Copyright 2013 TRENDnet. All Rights Reserved. TEW750DAP An Infrastructure network contains an Access Point or wireless AP. All the wireless devices, or clients, will connect to the wireless AP or access point. An Ad-Hoc network contains only clients, such as laptops with wireless Cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The AP offers wireless security options like WPA/WPA2 PSK/EAP. What is WPA?
WPA (Wi-Fi Protected Access) is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol
(TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless AP or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. 32 TRENDnet Users Guide Back Page Technical Specifications Hardware Specifications LAN Interface: Four 10/100Mbps LAN ports WPS button Reset button Power button Wireless Interface (2.4GHz): IEEE 802.11b/g/n Wireless Interface (5GHz): IEEE 802.11a/n Operating Voltage Input: 100~240V (10%), 50~60Hz Output: DC12V, 1A Power Consumption: 10.1 Watt Temperature Operating: 0oC~40oC (32oF~104oF) Non-Operating: -20oC~65oC (-4oF~149oF) Humidity Operating: 10%~90% non-condensing Non-Operating: 5%~95% non-condensing Copyright 2012 TRENDnet. All Rights Reserved. Wireless Frequency Range For 15.407 802.11a/n:5.18~5.24GHz For 15.247 802.11b/g/n:2.412~2.462GHz 802.11a/n:5.745~5.825GHz Wireless Bandwidth Rate IEEE 802.11b: 11, 5.5, 2, and 1 Mbps IEEE 802.11a/g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps IEEE 802.11n: 6.5 to 300 Mbps Wireless Channel Numbers For 15.407 4 for 802.11a,802.11n(HT20) 2 for 802.11n(HT40) For 15.247(2.4G) 11 for 802.11b, 802.11g,802.11n(HT20) 7 for 802.11n(HT40) For 15.247(5G) 5 for 802.11a,802.11n(HT20) 2 for 802.11n(HT40) 33 TRENDnet Users Guide Wireless Security WEP (64/128bit) WPA/WPA2-Personal WPA/WPA2-Enterprise WPS (PIN & PBC) 802.1X Wireless Modulation IEEE 802.11a: BPSK, QPSK, 16QAM, 64QAM, and OFDM IEEE 802.11b: DQPSK, DBPSK, and CCK IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, and OFDM IEEE 802.11n: BPSK, QPSK, 16QAM, and 64QAM with OFDM Safety and Emission EMI: FCC Class B, CE Class B Safety: UL, TUV Dimensions & Weight 120 x 164 x 45 mm 241.7 grams Copyright 2012 TRENDnet. All Rights Reserved. Federal Communication Commission Back Page Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 34 TRENDnet Users Guide Back Page
-
that Connect the equipment into an outlet on a circuit different from to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Copyright 2012 TRENDnet. All Rights Reserved. 35 TRENDnet Users Guide Radiation Exposure Statement:
Back Page This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Copyright 2012 TRENDnet. All Rights Reserved. 36
This product uses the FCC Data API but is not endorsed or certified by the FCC