TEW805UB AC1200 Dual Band USB Adapter Manual

 

TRENDnet Users Guide Cover Page TRENDnet Users Guide Contents Product Overview ........................................................................... 1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features........................................................................................... 2 Application Diagram ...................................................................................................... 2 Installation ...................................................................................... 3 Software Installation...................................................................................................... 3 Hardware Installation .................................................................................................... 3 Wireless Utility ............................................................................... 4 Wireless Utility Setting .................................................................................................. 4 General .......................................................................................................................... 4 Profile ............................................................................................................................ 4 Available Networks ........................................................................................................ 6 Status ............................................................................................................................. 6 Statistics ......................................................................................................................... 7 WiFi Protected Setup (WPS) .......................................................................................... 8 Pin Input Configuration (PIN) .................................................................................... 8 Push Button Configuration (PBC) .............................................................................. 9 About ........................................................................................................................... 10 Technical Specifications................................................................. 11 Troubleshooting ............................................................................ 12 Appendix ...................................................................................... 13 Federal Communication Commission Interference Statement ................................... 16 Europe EU Declaration of Conformity ...................................................................... 17 Copyright 2013 TRENDnet. All Rights Reserved. Limited Warranty ......................................................................................................... 19 Table of Contents i TRENDnet Users Guide Product Overview Features TEW-805UB TEW-805UB Package Contents In addition to your wireless adapter, the package includes:

TEW-805UB CD-ROM (Utility & Driver) Multi-Language Quick Installation Guide If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. TRENDnet's AC1200 Dual Band Wireless USB Adapter, model TEW-805UB, connects a laptop or desktop computer to a revolutionary Wireless AC network. Connect to a Wireless AC network at an amazing 867 Mbps or to a Wireless N network at up to 300 Mbps. A SuperSpeed 5 Gbps USB 3.0 port maintains a high speed connection to your computer. Quickly connect to a Wireless AC or N network at the touch of a button with the convenience of one-touch Wi-Fi Protected Setup (WPS). An LED on the front of the adapter conveys device status. Upgrade your computer's wireless connection to experience the speed of revolutionary Wireless AC. Wireless AC: Next generation Wireless AC Dual Band: Up to 867 Mbps Wireless AC or 300 Mbps Wireless N Compatible: Connects to standard Wireless N networks USB 3.0: SuperSpeed 5 Gbps USB 3.0 connection to computer Coverage: Expanded coverage with MIMO technology One Touch Connection: Connect to a router at the touch of the Wi-Fi Protected Setup

(WPS) button Wi-Fi compliant with IEEE 802.11ac and 802.11n standards High-speed data rates up to 867 Mbps with 802.11ac technology and 300 Mbps with 802.11n technology USB 3.0 connector LED indicator Backwards compatible with IEEE 802.11g, IEEE 802.11b, and IEEE 802.11a networks Compatible with Windows 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), and XP(32/64-bit) operating systems One-touch network connection with Wi-Fi Protected Setup (WPS) button Dynamic Data Rate Scaling from 867 Mbps to 1 Mbps Supports advanced wireless encryption up to WPA2-RADIUS Easy user setup and diagnostic utilities Coverage of up to 100 meters indoor (330 feet) and 300 meters outdoor (980 feet) 3-year limited warranty Copyright 2013 TRENDnet. All Rights Reserved. 1 TRENDnet Users Guide Product Hardware Features WPS button Application Diagram TEW-805UB LED Indicator Power/Status LED -This LED turns on when the USB adapter has power and ready for use and blinks during wireless data transmission. WPS (Wi-Fi Protected Setup) button Push and hold this button for 3 seconds to activate WPS. The Power/Status LED will blink blue when WPS is activated. A router is installed near the modem (typically supplied by your ISP Internet Service Provider) and physically connected to it from the routers WAN port to the modems network port which connects to the Internet creating a wireless network. Wireless signals from the router are broadcasted to wireless clients such as laptops with wireless capabilities. The TEW-805UB is used for computers without wireless capabilities and to connect to the wireless network. Copyright 2013 TRENDnet. All Rights Reserved. 2 TRENDnet Users Guide TEW-805UB Installation Software Installation This section describes how to install the driver and utility for the AC1200 Dual Band Wireless USB Adapter. 1. Insert the Utility and Driver CD-ROM into your computers CD-ROM Drive and then click Install Utility. Hardware Installation 1. Plug the AC1200 Dual Band Wireless USB Adapter into an available USB slot on your computer. 2. Follow the InstallShield Wizard Instructions 3. Click Finish to complete installation if prompted for computer restart the computer click OK. Copyright 2013 TRENDnet. All Rights Reserved. Note: Plug the device into an available USB 3.0 port for maximum performance. 2. Verify that the LED is turned on. Continue to the next section on how to configure that wireless adapter. 3 TRENDnet Users Guide Wireless Utility Wireless Utility Setting The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. TEW-805UB Status: Shows connection status. Speed: Shows the transmission and the reception data rate. Type: Shows the connection type, Infrastructure or Ad-Hoc mode. Encryption: Shows the current encryption type used. SSID: Shows the current SSID, which must be the same as your wireless access point or router in order to establish the connection correctly. Wireless Mode: Shows the current wireless mode used. Signal Strength: Shows the wireless signal strength of the connection between the adapter and the Access Point or router. The Wireless Adapter Configuration Utility is divided into six sections: General, Profile, Available Networks, Status, Statistics and WPS. General This screen shows the general information of the wireless adapter. Link Quality: Shows the statistics of data transfer, and the calculation is based on the number of packets transmitted and received. Network Address: Shows the MAC address and IP address of the adapter. Profile The user can create and manage the created profiles for home, work or public areas. By double-clicking on one of the created profile, the setting will adjust to the specific setting such as SSID, channel, and encryption as saved by that particular profile. Copyright 2013 TRENDnet. All Rights Reserved. 4 TRENDnet Users Guide TEW-805UB Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing the particular Access Point or Wireless Router. Or you can search the desire wireless router or AP under Available Networks section and click on Add Profile button to add the Profile. Remove: Deletes the selected profile Edit: Edit an exist profile. The screen will back to profile. Edit the SSID and select the Wireless Mode, Authentication and Encryption then click Apply to save the profile. When the Profile name was changed, a new profile will be added in the list. Duplicate: Duplicate the selected Profile. Set Default: Set the selected Profile as default connection. When adding a new profile the below screen will appear. This screen will allow you to set the wireless encryption settings from your wireless network to the wireless adapter. o Open System and Shared: Requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. WEP is considered basic level of wireless encryption, if you would like higher security connection, WPA2 encryption is recommended. Default Key: select one of the 4 keys to use. Network Key: choose the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. Key Length: select 64 or 128 bits as the length of the keys Key Format: HEX or ASCII Key Length Type Hex characters 0-9, A-F, a-f alphanumeric ASCII 64-bit 128-bit 10 characters 26 characters format 5 characters 13 characters o WPA-PSK/WPA2-PSK: Requires the user to use a passphrase as the encryption key, with a minimum length of 8 characters long or maximum of 64 characters long. Please select the cipher of TKIP or AES then enter the Passphrase key. AES cipher type is for WPA2 and TKIP is for WPA. o WPA/WPA2 EAP-TLS: Also known as RADIUS or Enterprise requires the user to have a radius server connected to their network for wireless authentication and a password. Please select the cipher of TKIP or AES then enter the Passphrase key. AES cipher type is for WPA2 and TKIP is for WPA. Then select the WPA/WPA2 Certificate from drop down list. 5 Wireless Network Security: The following options are available: Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA-TLS . Select Open System, Shared Key for WEP data encryption feature. Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet Users Guide Available Networks This screen allows the user to scan for available wireless network. It also allows the user to establish wireless communications with a target device. TEW-805UB Status Display the information of the adapter including manufacturer, driver version, utility version, encryption, encryption type, region, adapters MAC address, current connection data rate, channel, connection status, the associated router or Access Points SSID, network type, associated devices MAC address, and Up time. Available Networks: Displays the wireless networks (wireless clients, access points or routers) that are within range. Refresh: Click this button to rescan for available networks. Select any one of the wireless networks and connect to it by double-clicking. Add Profile: Select your wireless network on the available network list and click Add Profile button to connect. You can also double click your wireless network from the available network list. Manufacture: Wireless adapters manufacture NDIS Driver Version: Driver version the wireless adapter is using. This can be useful to determine if the drivers installed are the latest or correct. Utility Version: Utility version the wireless adapter is using. This information is useful to determine if the utility version is the latest version. Encryption: The wireless encryption used on the wireless adapter. This information is useful to determine if the applied wireless encryption is the same as your wireless network. Authentication: The authentication type used on the wireless adapter. This information is useful to determine if the applied wireless authentication is the same as your wireless network. Region: The wireless adapters wireless region. Copyright 2013 TRENDnet. All Rights Reserved. 6 TRENDnet Users Guide MAC Address: The MAC address of the wireless adapter. This information is useful to determine your wireless adapter when looking at the DHCP server list of your wireless adapter. Data Rate: Displays the data rate of the wireless adapter and your wireless network. Channel: Displays the channel of your wireless network is using and the wireless adapter is connected to. Status: Displays the status of the wireless adapter. This information is useful when troubleshooting the connection of the wireless adapter and your wireless network. SSID: The SSID your wireless network is connected to. Network Type: Displays the type of network the wireless adapter set to. Associated AP MAC: Displays the MAC address of the device the wireless adapter is connected to. Up Time: Displays how long the wireless adapter has been connected. Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB Statistics This section displays the statistics of the adapter connection. TX means transmission and RX means Reception. Counter Name: Type of packets. Value: The value of packets. Reset: Click this button to clear the table. 7 TRENDnet Users Guide WiFi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and configuring security on a wireless network. There are two methods used in the WPS as below instruction. TEW-805UB 3. Choose to select the specific AP/Router or a WPS enabled device with client PIN entered. Choose Yes to allow you to select your wireless network. Choose No to have the wireless adapter select your wireless network on its own. Pin Input Configuration (PIN) Follow the steps below when using the WPS configuration with the Pin Input Configuration method. Please note that WPS will attempt to authenticate in 120 seconds. Make sure you allow this time frame to prevent any failures. 1. Click on the Pin Input Configuration (PIN) button, the PIN is shown on the button of the windows. 4. Select a wireless access point or router then click the Select button start the WPS configuration. 2. Enter the PIN code into the WPS Client PIN number of you wireless access point or router ( in example, TRENDnet TEW-639GR Wireless N Gigabit Router) then click the Start PIN button, the wireless access point or router will start the WPS configuration process. Copyright 2013 TRENDnet. All Rights Reserved. 8 TRENDnet Users Guide TEW-805UB 5. The wireless utility will automatically attempt to authenticate to your wireless network. Push Button Configuration (PBC) There are 2 ways to run WPS Push Button Configuration. Follow the steps below when using the WPS configuration with the Push Button Configuration (PBC) method through the wireless utility. Please note that WPS will attempt to authenticate in 120 seconds. Make sure you allow this time frame to prevent any failures. 1. Click on the Push Button Configuration (PBC) button, the PIN is shown on the button of the windows. 6. If the WPS configuration was successful, the following window will appear. 2. Push the WPS button on your wireless access point or router. 7. If the WPS configuration was failed, the follow window will show on. Try to repeat the steps again if this screen appears. 3. If the WPS configuration was successful, the follow window will show on. Copyright 2013 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide 4. If the WPS configuration was failed, the follow window will show on. The other way to configure method of WPS Push Button Configuration is through the physical button located on the unit. 1. Press and hold the WPS button on your wireless router or access point. In most cases the WPS LED will turn on when WPS is activated. 2. Push and hold for 5 seconds the WPS button on the wireless adapter. 3. Once the WPS LED turns off you can check if the authentication was successful by checking the Status tab on the wireless utility. Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB About This screen displays information about the AC1200 Dual Band Wireless USB Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be able to identify by version numbers. 10 TRENDnet Users Guide Technical Specifications Hardware Interface Standards USB 3.0, 2.0, 1.1 standard IEEE 802.11a, IEEE 802.11ac (draft), IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n Enables WPS connection Receive mode: 167 mA (max.) ; Transmit mode: 224 mA

(max.) WPS Button Power Consumption Supported OS Windows 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), Windows XP (32/64-bit) 80 x 27 x 12 mm (3.1 x 1 x 0.5 in.) 20 g (0.7 oz) Dimensions

(LxWxH) Weight Temperature Operating: 0 ~ 40 C (32 ~ 104 F) Storage: -10 ~ 70 C (14 ~ 158 F) Max. 95% (non-condensing) CE, FCC DBPSK/DQPSK/CCK/OFDM (BPSK/QPSK/16-QAM/64-

QAM/128-QAM/256-QAM) 2 internal antennas 802.11b/g/n: 2.412 ~ 2.472 GHz 802.11a/n/ac: 5.150GHz ~ 5.350 GHz / 5.725 GHz ~ 5.825 GHz

(FCC), 5.150 GHz ~5.350 GHz / 5.470 GHz ~ 5.725 GHz (ETSI) CSMA/CA with ACK Humidity Certifications Wireless Modulation Antenna Frequency Media Access Protocol TEW-805UB Data Rate

(auto fallback) 802.11a: up to 54 Mbps 802.11b: up to 11 Mbps 802.11g: up to 54 Mbps 802.11n: up to 300 Mbps (for both 2.4 & 5 GHz) 802.11ac: up to 867 Mbps Output Power 802.11b: 15 dBm (typical) 802.11g: 15 dBm (typical) 802.11n : 15 dBm (typical) (for both 2.4 & 5 GHz) 802.11a: 15 dBm (typical) 802.11ac: 12 dBm (typical) 802.11b: -76 dBm (typical) 802.11g: -65 dBm (typical) 802.11n : -61 dBm (typical) 802.11a: -65 dBm (typical) 802.11ac: -51 dBm (typical) 64/128-bit WEP, WPA/WPA2-RADIUS, WPA / WPA2-PSK

(AES/TKIP) 2.4 GHz: 1~11 (FCC), 1~13 (ETSI) 5 GHz: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165

(FCC) 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 (ETSI) Receiving Sensitivity Encryption Channels

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. Copyright 2013 TRENDnet. All Rights Reserved. 11 TRENDnet Users Guide TEW-805UB Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?

Answer:

1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the Search programs and files box, and type D:\autorun.exe, where D in D:\autorun.exe is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard 2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start Search box, and type D:\autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. 3. For Windows 2000/XP, if the installation menu does not appear automatically, click Start, click Run, and type D:\autorun where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. Q: I completed all the steps in the quick installation guide, but my Wireless USB Adapter is not connecting to my access point. What should I do?

Answer:

1. Verify that the SSID (Network Name) matches your wireless router or access point's 2. Please check with your network administrator for security key in order to access a secured wireless access point or router. Please refer to the User's Guide for more information regarding wireless network security. 3. Check your TCP/IP properties to ensure that Obtain an IP address automatically is 4. Double-click the Wireless Configuration Utility icon, click Available Networks and then click Refresh to check and see if there are any available wireless networks listed. SSID selected. Q: Windows is unable to recognize my hardware. What should I do?

Answer:

1. Make sure your computer meets the minimum requirements as specified in Section 1 of this quick installation guide. 2. You must complete the installation of the Wireless Configuration Utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. 3. Connect the Wireless USB Adapter to a different USB port on your computer. Q: I cannot open the Wireless Configuration Utility. What should I do?

Answer:

Access your device manager to make sure the adapter is installed properly. 1. To access the device manager on Windows 7, click on the Windows icon on the bottom left-hand corner, click Computer, click System Properties and then click Device Manager. 2. To access the device manager on Windows Vista, right-click Computer, click Properties and then click Device Manager. 3. To access the device manager on Windows XP, right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. If you see a networking device with a yellow question mark or exclamation point:

1. Uninstall the device from device manager 2. Remove the adapter from the computer 3. Click the Windows / Start icon, click All Programs, click TRENDnet Wireless and then click Uninstall. Copyright 2013 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide TEW-805UB Appendix How to choose the type of security for your wireless network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router. There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware). It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.). In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network. Wireless Encryption Types WEP: Legacy encryption method supported by older 802.11b/g hardware. This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b or 802.11g wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. Note: This encryption standard will limit connection speeds to 54Mbps. WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. WPA-Auto: This setting provides the router with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps WPA2: This is the most secure wireless encryption available today, similar to WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your router to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your router to either WPA or WPA-Auto encryption. Note: Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported. Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. Security Standard WPA2 WPA WEP IEEE 802.11a/b/g

(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g

(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g/n Up to 54Mbps Up to 54Mbps Up to 450Mbps*

Low Open System or Shared Key, HEX or ASCII, Different key sizes Open System ASCII 13 characters Medium TKIP or AES, Preshared Key or RADIUS TKIP Preshared Key 8-63 characters High TKIP or AES, Preshared Key or RADIUS AES Preshared Key 8-63 characters Recommended Configuration

*Dependent on the maximum 802.11n/ac data rate supported by the device (150Mbps, 300Mbps, 450Mbps or 867Mbps) Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Copyright 2013 TRENDnet. All Rights Reserved. 13 TRENDnet Users Guide How to find your IP address?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Windows 2000/XP/Vista/7/8 1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box. 2. In the dialog box, type cmd to bring up the command prompt. 3. In the command prompt, type ipconfig /all to display your IP address settings. How to configure your network settings to obtain an IP address automatically or use DHCP?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Windows 7/8 a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK. Windows Vista a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. d. Then click Obtain an IP address automatically and click OK. Windows XP/2000 a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. TEW-805UB c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. How to find your MAC address?

In Windows 2000/XP/Vista/7 Your computer MAC addresses are also displayed in this window, however, you can type getmac v to display the MAC addresses only. How to connect to a wireless network using the built-in Windows utility?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility. Windows 7/8 1. Open Connect to a Network by clicking the network icon (

area. 2. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows Vista 1. Open Connect to a Network by clicking the Start Button. To. 2. In the Show list, click Wireless. 3. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. and then click Connect

) in the notification or Copyright 2013 TRENDnet. All Rights Reserved. 14 TRENDnet Users Guide Windows XP 1. Right-click the network icon in the notification area, then click View Available Wireless Networks. 2. In Connect to a Network, under Available Networks, click the wireless network you would like to connect to. 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB 15 TRENDnet Users Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. IMPORTANT NOTE:

Radiation Exposure Statement:

This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. For Taiwan 16 TRENDnet Users Guide Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN60950-1: 2006+A11:2009+A1: 2010+A12:2011 Safety of Information Technology Equipment EN62311: 2008 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz -

300 GHz) EN 300 328 V1.7.1: 2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 893 V1.6.1: 2011 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2: 2011-09 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1: 2012-09 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 17 TRENDnet Users Guide esky

[Czech]

Dansk

[Danish]

Deutsch

[German]

Eesti

[Estonian]

English Espaol

[Spanish]

[Greek]

Franais

[French]

Italiano

[Italian]

Latviski

[Latvian]

Lietuvi

[Lithuanian]

TRENDnet tmto prohlauje, e tento TEW-805UB je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede TRENDnet erklrer herved, at flgende udstyr TEW-805UB overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt TRENDnet, dass sich das Gert TEW-805UB in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab TRENDnet seadme TEW-805UB vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, TRENDnet, declares that this TEW-805UB is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente TRENDnet declara que el TEW-805UB cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. TRENDnet TEW-805UB 1999/5/. Par la prsente TRENDnet dclare que l'appareil TEW-805UB est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente TRENDnet dichiara che questo TEW-805UB conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o TRENDnet deklar, ka TEW-805UB atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo TRENDnet deklaruoja, kad is TEW-805UB atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands Hierbij verklaart TRENDnet dat het toestel TEW-805UB in overeenstemming is met de essentile eisen en de andere relevante Copyright 2013 TRENDnet. All Rights Reserved. TEW-805UB

[Dutch]

bepalingen van richtlijn 1999/5/EG. Malti

[Maltese]

Magyar

[Hungarian]

Polski

[Polish]

Portugus

[Portuguese]

Slovensko

[Slovenian]

Slovensky

[Slovak]

Suomi

[Finnish]

Svenska

[Swedish]

Hawnhekk, TRENDnet, jiddikjara li dan TEW-805UB jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-

Dirrettiva 1999/5/EC. Alulrott, TRENDnet nyilatkozom, hogy a TEW-805UB megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym TRENDnet owiadcza, e TEW-805UB jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. TRENDnet declara que este TEW-805UB est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. TRENDnet izjavlja, da je ta TEW-805UB v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. TRENDnet tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. TRENDnet vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar TRENDnet att denna TEW-805UB str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. 18 TRENDnet Users Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-805UB 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement units warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMERS SOLE REMEDY SHALL BE, AT TRENDNETS OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING Copyright 2013 TRENDnet. All Rights Reserved. Limited Warranty WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNETS PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMERS OR ANY THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNETS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. PWP05202009v2 2013/02/14 19