FCC ID: W8UTCLZOOM TCL Zoom remote

User Guide www.tclusa.com TABLE OF CONTENTS:

Introduction Battery setup Installing your TCL Zoom remote Installing the TCL Zoom channel Installing your Zoom receiver TCL Zoom remote button functions Using your TCL Zoom remote Use TCL Zoom remote on Zoom channel Use TCL Zoom remote outside Zoom channel Troubleshooting Warranty FCC Statement 1 Join our Zoom Facebook group to learn more about your device and get the latest news. Scan the QR code or type in the shorturl https://scnv.io/NJNR Introduction Congratulations on your purchase of the TCL Zoom, the interactive remote control created specically for kids. Features:

- Compatible with TCL Roku TV models 43S525 and 50S525.

- Interactive remote for navigating the Zoom streaming channel.

- When paired with the Zoom channel, kids will be able to navigate through thousands of movies.

- It functions as a regular TV remote control, i.e., turning the TV on/off, volume control, and option select; and it can also be used with other TV applications.

- Voice search can be used to nd movies on the Zoom channel. Inclusions:

TCL Zoom remote Zoom receiver 2 Two (2) AAA batteries Battery setup Your TCL Zoom remote requires two (2) AAA batteries. Battery Installation:

1. On the back of the Zoom remote, the battery compartment is located at the bottom. Place your nger on the corrugated surface of the battery cover and slide it downwards to remove it. 2. Insert two (2) AAA batteries inside by matching the

(+) and (-) symbols of the batteries to the (+) and (-) symbols inside the battery compartment. 3. To cover the battery compartment, place the battery cover below the opening and slide it upwards to lock-in place. 3 NOTE: If your Zoom remote stops working properly, replace batteries immediately. Battery Precautions:

- Do not mix old and new batteries.

- Do not mix rechargeable and disposable batteries.

- Always remove old or worn-out batteries and replace them with new ones.

- Recycle or dispose of batteries in accordance with local and national regulations. 4 Installing your TCL Zoom remote Installing the TCL Zoom channel 1. Check if the Zoom channel is already installed in your TCL Roku TV. 2. If the Zoom channel is not yet installed, go to Streaming Channels menu. 3. Enter Zoom on the search box and then select Zoom. 4. Select Add Channel to install the Zoom channel. 5 Installing your Zoom receiver 1. Turn on your TV using the TV remote control. 2. Plug your Zoom receivers dongle into the TVs USB port which is usually located on the side of the TV. 3. Place your Zoom receiver on top of the TV facing front. Use the back clip to adjust and t the receiver on the TV. Make sure that the angle of the Zoom receiver is within range of your Zoom remote. TV NOTE: Make sure that the front of the Zoom receiver is facing forward. TVTV 6 TCL Zoom remote button functions Your TCL Zoom remote also functions as a TV remote control. A B C D E F G Power - turns the remote on/off Zoom - shortcut to Zoom channel Trackpad - zooming in/out Voice - voice search Left/Right - menu navigation Volume Up/Down Trigger - select items/play movie/OK button 7 A B C D E F G Using your TCL Zoom remote NOTE: For more instructions, access the Help page in Zoom channel. Use TCL Zoom remote in Zoom channel 1. Point your Zoom remote at the TV and make sure that it is within range of your Zoom receiver. 2. Slowly move your Zoom remote and a blue circle will appear on your TV screen as a pointer. 3. Select a topic island then slide your thumb up on the trackpad to zoom in and see the movies on that island. 4. You can further zoom in the screen by sliding your thumb again. 5. If you want to go back, just zoom out by sliding your thumb downwards on the trackpad. 6. To move the screen around, hold the trigger and slowly move your arm around. 7. To select a movie, point the blue circle then press the trigger. Use TCL Zoom remote outside Zoom channel 1. Use the trackpad to go up/down the menu; / keys to go left/right. 2. Use the trigger to select. 8 Troubleshooting Remote does not operate on your TV

- Make sure that the Zoom receiver is plugged properly on your TV.

- Check if your batteries are new and installed correctly.

- Make sure that your Zoom remote is within range of the Zoom receiver and there is no obstruction between the receiver and the remote.

- Make sure you have installed the Zoom channel on your TV.

- Check the angle of your Zoom receiver and adjust it properly.

- Zoom remote may not be compatible with your TV. Version of TV supported TCL Roku TV 43S525 and 50S525 9 Pairing of the Zoom remote and the receiver The Zoom remote and the receiver are pre-paired. Users dont have to pair it by themselves in general. But if the light on the remote does not turn to blue and it remains red, this indicates the Zoom remote and the receiver needs to be paired again. 1. Keep the receiver plugged to the TV. 2. Move the Zoom remote close to the receiver. 3. Long press the Zoom button and the volume down button for a few seconds. 4. The red light will ash blue two times to indicate that both devices are paired. 10 Warranty TCL North America warrants this product to be free from manufacturing defects for a period of 90 days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specic rights, and you may also have other rights which vary from state to state. If the unit should prove defective within the warranty period, return prepaid with dated proof of purchase to:

TTE Technology, Inc. (dba TCL North America) 1860 Compton Ave, Corona, CA 92881, USA 11 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur 12 in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

13 FCC Suppliers Declaration of Conformity Brand name: TCL Model number: TCL ZOOM, RECEIVER This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Supplier Name: TTE Technology, Inc. (dba TCL North America) Supplier Address (USA): 1860 Compton Ave, Corona, CA 92881, USA Supplier phone number and internet contact information: 1-877-300-8837, support.tclusa.com IC

14 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 15 TTE Technology, Inc. (dba TCL North America) 1860 Compton Ave, Corona, CA 92881, USA

TTE Technology, Inc. Date: 2019/11/22 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: TTE Technology, Inc. Contact Name: Aaron Dew Title of PersonDirector of Product Development Address: 1860 Compton Ave Corona California 92881 United States

TTE Technology, Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID:W8UTCLZOOM To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: TTE Technology, Inc. Contact Name: Aaron Dew Title of PersonDirector of Product Development Address: 1860 Compton Ave Corona California 92881 United States Date:2019/11/22