e UBIQUITI NETWORKS S, ff. f TVOCHET U5 5 GHz Carrier Class airMAX BaseStation Model: RM5-AC-PTP R5AC-PTMP ; RM5 AC-PTMP Quick START GUIDE 4. Connect the RF cables (included with the RocketDish) to the RP-SMA Connectors located on top of the Rocket. 5. Attach the Rocket to the RocketDish. a. Align the mounting tabs on the back of the Rocket with the four mounting slots on the RocketDish. b. Slide the Rocket down until it locks into place. Introduction Thank you for purchasing the Ubiquiti Networks RocketM5 AC PTP Lite. This Quick Start Guide is designed to guide you through installation and show how to access the airOS Configuration Interface. This guide also includes the warranty terms and is for use with the RocketM5 AC PTP Lite in Point-to-Point links. Package Contents a ry
a y 1.)
=_= Oo SA RocketM5 AC Gigabit PoE Adapter Power Cord Quick Start PTP Lite (24V, 0.5A) Guide Installation Requirements
* Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. This is a specific product that requires professional installation and configuration, must be performed by trained technical engineers to install the antenna, the Ubiquiti Networks.,Inc agents contact information as follows:
Ubiquiti Networks.,Inc 12, No. 105, Song Ren Rd., Sin Yi District, Taipei 110, Taiwan Tel: +886 2 17581657 Fax: +886 2 27581637 Email:info@ubnt.com 6. Attach the other end of the RF Cables to the RF connectors in this combination: Chain 1 to H and Chain 0 to V. 7. Attach the Protective Shroud. a. Align the hash mark on the top of the shroud with the notch on the RocketDish. b. Rotate the shroud clockwise until it locks into place. RocketM5-AC-PTP-Lite_QSG_V02_03-14-14_Foldout.indd 1 Hardware Overview RP-SMA Antenna Connectors LED Panel Port Cover Connecting Power over Ethernet 1. Connect the other end of the Ethernet cable from the Rocket to the Ethernet port labeled POE on the Gigabit PoE Adapter. 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the Gigabit PoE Adapter. 3. Connect the Power Cord to the power port on the Gigabit PoE Adapter. Connect the other end of the Power Cord to a power outlet. LED Panel Signal The default wireless signal strength values are shown below:
oO LED will light blue when the wireless signal strength is equal to or above -65 dBm. pS LED will light blue when the wireless signal strength is equal to or above -73 dBm. oO LED will light blue when the wireless signal strength is equal to or above -80 dBm. oO LED will light blue when the wireless signal strength is equal to or above -94 dBm. LAN LAN The main Ethernet LED will light steady blue when an active Ethernet connection is made to the LAN port and flash when there is activity.
& Power The Power LED will light blue when the device is connected to a power source. Accessing airOS Connect to the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the Rocket. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser. Type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac).
(<| > }[O https://192.168.1.20 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language. You must agree to the Terms of Use to use the product. Click Login. Login ease login to manage your wireless device. TERMS OF USE This Ueigua neurone ne alo vie must a8 professionally counery Select YourCounty 7 Language Engisn , You must also reed and agree to the terms of the UBIQUTI FIRMWARE LICENSE AGRECLENT in the lk below before you wnload or instal or se 8 Ubi Leia suwase UCENSE aGaeewENT Dt sree to tnete TERMS OF USE andthe USIGUIT HRMMWARE LICENSE AGREEMENT za Note: For the Country setting, U.S. product versions are restricted to a choice of Canada, Puerto Rico, or the U.S. to ensure compliance with FCC/IC regulations. The airOS Configuration Interface will appear, allowing you to customize your settings as needed. For additional details on the airOS Configuration Interface, refer to the User Guide available at documentation.ubnt.com/airmax Ports Reset Lime ~
Button LAN/PoE Port LAN/PoE This Gigabit Ethernet port is used to connect the power and should be connected to the LAN. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the Rocket is already powered on. Alternatively, the Rocket may be reset remotely via a Reset button located on the bottom of the Gigabit PoE Adapter. oe
-@OC Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. PU eer eid eo Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna Gain, Cable Loss, and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements. Hardware Installation The RocketM5 AC PTP is designed to mount directly onto a Ubiquiti air MAX RocketDish antenna. 1. Lift the release latch on the bottom of the Rocket and slide the Port Cover off. i a v-.., ee
2. Connect an Ethernet cable to the LAN port. w Replace the Port Cover. 640-00104-02 Specifications RocketM5 AC PTP Lite Dimensions 162 x 84 x 37 mm (6.4 x 3.3 x 1.5 in) Weight 250 g (8.82 oz) Operating Frequency Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz Networking Interface (1) 10/100/1000 Ethernet Port RF Connectors (2) RP-SMA (Waterproof) Enclosure Outdoor UV Stabilized Plastic Max. Power Consumption 8.5 W Power Supply 24V, 0.5A Gigabit PoE Adapter (Included) Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Operating Temperature -40 to 80 C (-40 to 176 F) Operating Humidity ESD/EMP Protection Shock and Vibrations 5 to 95% Non-Condensing 24KV Contact / Air for Ethernet ETSI300-019-1.4 Certifications CE, FCC, IC
3/14/14 6:37 PM