FCC ID: SWX-AFAP AMPLIFI ALIEN

2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Package Contents Router MeshPoint Power Cables (Qty. 2) Ethernet Cable Hardware Overview Router https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 1/17 2019/11/6 AFi-ALN Quick Start Guide Touchscreen Display AFi-ALN Quick Start Guide The front of the AmpliFi Router features a touchscreen display. Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app.

(4) Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired network device to the internet. Connects to the broadband modem provided by your ISP (Internet Service Provider). Ethernet Ports WAN Port Power Port The Power Cable connects to this port. MeshPoint Signal LEDs https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 2/17 2019/11/6 AFi-ALN Quick Start Guide The Signal LEDs will reflect signal strength once the MeshPoint is connected to the Router. AFi-ALN Quick Start Guide Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app. Gigabit Ethernet port available to connect a 10/100/1000 Mbps wired network device to the internet. The Power Adapter connects to this port. The AmpliFi Router can be installed using one of the following methods:

App Users AmpliFi app for iPhone or Android Non-App Users Connect to default AmpliFi wireless network (SSID) from a computer or tablet. Ethernet Port Power Port Installation App Users 1. 2. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 3/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 3. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 4/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 4. 5. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 5/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 6. 7. Follow the on-screen instructions to configure your AmpliFi Router. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 6/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Non-App Users 1. 2. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 7/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 3. 4. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 8/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 5. 6. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 9/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 7. 8. Connect to the new wireless network that you've created. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 10/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Installing the MeshPoint App Features The system dashboard is displayed in the System window. It provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings. Tap Start Test on the Performance screen to run a speed test that will provide your download speed, upload speed, and connection ping time. Swipe left on the throughput section to view additional data. A history of recent tests is displayed at the bottom. To provide guest access, determine the number of guests, select a time limit for their access, and tap Start. Guests simply connect to https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 11/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide your wireless network named with the -guest label. No password is required. As guests connect, the number of users connected will be displayed in the app. Tap Stop at any time to turn off the guest network. The Family Profiles feature allows you to create profiles for family members, groups, or areas of your home. Assign devices to the profile, schedule quiet time (when internet is not accessible), and pause the internet at any time. The Diagnose option will check your WAN link, IP settings, internet connection, and MeshPoint status. Side Menu - 24/7 Live Chat Support in the upper left of the app to access the side menu. Tap Live Support for Tap 24/7 live chat support. Remote Access can also be enabled from this menu. Resetting to Factory Defaults If the AmpliFi Router administration password is lost, factory default settings can be restored. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 12/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Router Reset Use an object such as a straightened paper clip to press Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off. System Specifications Dimensions Weight Max. TX Power MIMO Speeds Range Power Method Power Supply Supported Power Voltage 110 x 110 x 250 mm (4.33 x 4.33 x 9.84") Router: 1.2 kg ( 2.65 lb), MeshPoint 1.09 kg ( 2.40 lb) 2.4 GHz: 23 dBm per chain, 5 GHz 19 dBm per chain (low band)/ 20 dBm per chain (high band):

2.4 GHz: 4x4, 5 GHz: 4x4 (low-band) + 8x8 (high band) 2.4 GHz: 1148 Mbps, 5 GHz: 1733 Mbps (low band)/ 4804 Mbps (high band) 21,000 sq. ft AC AC Outlet Directly 100-240V Max. Power Consumption Router: 35W, MeshPoint: 34W https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 13/17 2019/11/6 AFi-ALN Quick Start Guide ESD/EMP Protection AFi-ALN Quick Start Guide 24kV Air/Contact Reset

(2) Internal Dual-Band Metal Stamp with 12 Polarity 2.4 GHz: 4 dBi, 5 GHz: 3.5 dBi Buttons Antennas Antenna Gain Wi-Fi Standard Power Save Wireless Security Operating Temperature Operating Humidity Certifications 802.11a 802.11b 802.11g 802.11n 802.11ac Supported Data Rates 802.11ax (Backbone) 802.11ax (Available to Clients) Operating Frequency US/CA Up to Wi-Fi 6 Yes WPA2

-10 to 45 C (14 to 113 F) 5 to 95% Noncondensing FCC / IC 54 Mbps 11 Mbps 54 Mbps 600 Mbps + 600 Mbps 1733 Mbps+ 3466 Mbps 1148 + 4804 Mbps 1148 + 4804 Mbps U-NII-1 U-NII-3 2412 - 2462 5150 - 5250 5725 - 5850 Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 14/17 2019/11/6 AFi-ALN Quick Start Guide Limited Warranty AFi-ALN Quick Start Guide ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The AmpliFi Router and MeshPoint have been approved by FCC under FCC ID: SWX-AFAR

(for Router); FCC ID: SWX-AFAP (for MeshPoint). ISED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The AmpliFi Router and MeshPoint have been approved by ISED Canada under IC: 6545A-

AFAR (for Router); IC: 6545A-AFAP (for MeshPoint). The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 15/17 2019/11/6 AFi-ALN Quick Start Guide CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le AMPLIFI Router et MeshPoints ont t approuvs par ISDE CanadaISED Canada en vertu IC : 6545A-AFAR ( pour le routeur ) ; IC : 6545A-AFAP ( pour MeshPoint ). Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. AVIS IMPORTANT :

Dclaration sur lexposition aux rayonnements :

Cet quipement est conforme aux limites prvues pour lexposition aux rayonnements dans un environnement non contrl. Lors de linstallation et de la mise en fonctionnement de lquipement, assurez-vous quil y ait une distance minimale de 27 cm entre llment rayonnant et vous. Cet metteur ne doit tre install proximit daucune autre antenne ni daucun autre metteur, et ne doit tre utilis conjointement aucun autre de ces appareils. WEEE Compliance Statement Declaration of Conformity Online Resources https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 16/17 2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide 2019 Ubiquiti Inc. All rights reserved. https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 17/17

Date: 8/09/2021 Federal Communications Commission 445 12th Street, SW Washington, DC 20554 RE: Request for Class II Permissive Change for UNII2a and UNII2c operation Ubiquiti Networks hereby requests a Class II Permissive change to allow operation of the UNII2a and UNII2c band, via software upgrade to FCC ID: SWX-AFAP, and pursuant to Code of Federal Regulation 47 Part 13 of the Commissions Rules. This software will enable usage and DFS detections in the UNII2a and UNII2c band by the master device. When master device detects radar, both master and slave will cease to transmit on the associated channel until the allotted 30-minute lockout and successful channel availability check has been performed. Sincerely, Mark Feil Ubiquiti Inc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Date: 8/9/2021 TIMCO Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-AFAP, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commissions Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below:

Software Security Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the important rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Date: 16 August 2021 Federal Communications Commission 445 12th Street, SW Washington, DC 20554 RE: Declaration Cover Letter IC ID: 6545A-AFAP, FCC ID: SWX-AFAP This declaration letter is to affirm that the original test report FR661623-12 and FR661623-27AN for FCC ID: SWX-M445GL issued by Sporton International Inc. accurately represents the test results under the new conditions of this Class II Permissive Change for IC ID: 6545A-AFAP and FCC ID: SWX-AFAP. The module has been incorporated within the host as described by the manufacturer. Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Power of Attorney Date: 2021/01/20 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Unified Compliance Laboratories Address : 427 W 12800 South Draper Utah 84020 e-mail : ucl@ui.com Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Name and Job Title. : Mark Feil / Compliance Director E-mail : compliance@ui.com Tel. : 385-200-1617

Ubiquiti Inc. DATE : 2019/12/31 FCC ID:SWX-AFAP Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Company name: Cerpass Technology Corporation Address: No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City, 33848, Taiwan(R.O.C.) Name: Delia Feng For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TIMCO Engineering Inc., still resides with us. Signature FCC grantee contact person information. Name/Title: Mark Feil / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, NY, United States, 10017 TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ubnt.com

Ubiquiti Inc. Date: 2019/12/31 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Requesting Class II permissive change To Whom It May Concern:

The purpose of this letter is to request a Class II Permissive change for FCC ID: SWX-AFAP This report is prepared for FCC Class II permissive change. RF module and its antenna are not any changed. The major change filed under this application is:

Change #1: 2.4G ac/ax function added.(firmware change only) Change#2: 5G (Band 1 & band 4) Beamforming function added (firmware change only) Original Grant Issue Date is on 2019/11/7 Best Regards _____________________ Mark Feil / Compliance Manager Address: 685 Third Avenue, New York, NY, United States, 10017 Company Name: Ubiquiti Inc. Tel: 408-942-3084 Fax: 408-904-5255 Email: compliance@ubnt.com

Ubiquiti Inc. DATE : 2019/12/31 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: SWX-AFAP Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature FCC grantee contact person information. Name/Title: Mark Feil / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, NY, United States, 10017 TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ubnt.com

Ubiquiti Inc. DATE : 2019/12/31 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: SWX-AFAP Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:

Test Setup Photos External Photos Internal Photos User Manual These documents contain detailed system and equipment description and related information about the product which Ubiquiti Inc. considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve, Ubiquiti Inc.considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market. This request is being made retroactively due to an over site on our part. We understand that the information has been publicly available 180 days after date of grant. Signature FCC grantee contact person information. Name/Title: Mark Feil / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, NY, United States, 10017 TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ubnt.com

Confidentiality Request Letter Date: October 21, 2019 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: SWX-AFAP To whom it may concern:

Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. Internal Photographs 2. External Photographs 3. Users manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant Address

: Ubiquiti Inc.

: 685 Third Avenue New York United States 10017 Signature

:

Name and Job Title. E-mail Tel.

: Mark Feil,Compliance Manager

: compliance@ubnt.com

: 408-942-3084

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: October 21, 2019 Subject: declaration of composite/rated equipment for FCC ID: SWX-AFAP To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Class B personal computers and peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant Address Signature

: Ubiquiti Inc.

: 685 Third Avenue New York United States 10017

:

Name and Job Title. E-mail Tel.

: Mark Feil,Compliance Manager

: compliance@ubnt.com

: 408-942-3084