B5 USER GUIDE Processor Specs Memory Information Networking Interface Wireless Approvals RoHS Compliance SYSTEM INFORMATION Atheros AR2313 SOC, MIPS 4KC, 180MHz 16MB SDRAM, 4MB Flash 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES RADIO OPERATING FREQUENCY 5.745-5.825GHz TX SPECIFICATIONS DataRate 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Power 24 dBm 24 dBm 24 dBm 24 dBm 26 dBm 22 dBm 21 dBm 19 dBm Tolerance
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB M D F O a 1 1
. 2 0 8 RX SPECIFICATIONS Sensitivity
-94 dBm
-93 dBm
-91 dBm
-90 dBm
-86 dBm
-83 dBm
-77 dBm
-74 dBm DataRate 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Tolerance
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB
+/-1.5dB M D F O a 1 1
. 2 0 8 Outdoor (BaseStation Antenna Dependent):
Over 10km RANGE PERFORMANCE Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration PHYSICAL / ELECTRICAL / ENVIRONMENTAL 26.4 cm x 8 cm x 3cm 0.4kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 5 Watts 12V, 1A (12 Watts). Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-20C to +70C 5 to 95% Condensing ETSI300-019-1.4 SOFTWARE visit www.ubnt.com/airos COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation operating in conjunction with any other antenna or transmitter. INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. distance of at least 193cm from all persons and must not be located or