submitted | available | document details (if available) | source link |
---|---|---|---|
UniFi Cloud Key Gen2 Plus Quick Start Guide Aaron Jacoby Adobe PDF Library 15.0 |
various | QSG User Manual | Users Manual | 4.93 MiB |
Model: UCK-G2-PLUS Introduction Thank you for purchasing the Ubiquiti Networks UniFi Cloud Key Gen2 Plus. This Quick Start Guide is designed to guide you through installation and also includes warrantyterms. Package Contents UniFi Cloud Key Gen2 Plus System Requirement Web Browser: Google Chrome (Other browsers may have limited functionality.) TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements. Network Topology Requirement A DHCP-enabled network (for the UniFi Cloud Key to obtain an IP address) UniFi Cloud Key US-16-150W USG-PRO-4
(DHCP Server) LAN WAN Internet Sample Network Diagram Hardware Overview Front Panel LED Color White Blue Off/White/Blue State Solid Flashing Heartbeat Flashing Solid Flashing Rapid Flashing Slow Flashing Repeating Status Ready for configuration Initializing Firmware upgrade in progress. Device is busy; do not touch or unplug it. Device ready for use Shutting down Device failure; refer to the display for more information. User connected to device Recovery mode Front Panel UniFi Video Last Motion LCD Screen LCD Screen Displays device status information and the following:
UniFi SDN UniFi SDN 7 18 UniFi SDN 1.4k 1.4k Active Active Icon Description UniFi SDN Controller software Local IP address Status of internet connection Number of wired client devices or throughput of wired network traffic Number of wireless client devices or throughput of wireless network traffic Status of cloud access UniFi Video UniFi Video Last Motion Icon Description UniFi Video software Local IP address Status of internet connection Number of active cameras Time of last motion detected Standby UniFi Cloud Key Icon Description Status of internet connetion Local IP address Device name Status of Bluetooth 192.168.1.1 Back Panel Reset Button microSD Slot USB Type C Port Power Button USB Type C Power Port Ethernet Port Reset The Reset button serves two functions:
Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Power Button Press to turn the UniFi Cloud Key on or off. USB Type C Power Port Used for power if PoE is not available. Requires 9V, 2A or QuickCharge 2.0. microSD Slot (Optional) Used for external backup (microSD card not included). Ethernet Port Connects to a DHCP server on your LAN. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch. USB Type C Port Reserved for future use. Side Panels Security Lock Slot Rack-Mount Notch Rack-Mount Notch Security Lock Slot Allows the UniFi Cloud Key to be used with an optional security cable or lock (not included). Rack-Mount Notches Lock the UniFi Cloud Key into place when used with the optional rack-mount accessory (not included). Bottom Panel 13-Pin Connector HDD Latch 13-Pin Connector Connects to the optional rack-mount accessory (not included). HDD Latch Releases the HDD bay tray. Hardware Installation 1. Connect an Ethernet cable (not included) to the Ethernet port. 2. Connect the other end of the Ethernet Cable to a port on a network switch, such as a UniFi PoE Switch. 1 3 5 7 9 11 13 15 17 19 21 222 4 6 8 10 12 14 16 18 20 22 24SFP1SFP2 Powering the UniFi Cloud Key Use an 802.3af-compliant switch, such as a UniFi PoE Switch, or a USB power source (not included). UniFi Switch The UniFi Cloud Key can be powered by a UniFi PoE Switch or other 802.3af-compliant switch. UniFi Switch Power Connection Diagram USB Power Source Connect a USB cable (not included) from the UniFi Cloud Key directly to a USB power source: 9V,2A or QuickCharge 2.0. USB Power Connection Diagram 1 3 5 7 9 11 13 15 17 19 21 222 4 6 8 10 12 14 16 18 20 22 24SFP1SFP2 Initial Setup via Bluetooth Use the UniFi Mobile app to configure the UniFi Cloud Key. 1. Download the UniFi Mobile app from the AppStore (iOS) or Google Play (Android). 2. Enable Bluetooth on your mobile device. 3. Launch the app and hold your mobile device within 1.5m
(5) of the UniFi Cloud Key. In the Discovered Devices section, tap the 4. icon. Tap This Icon 5. Follow the on-screen instructions. The username and password you configure in the UniFi Mobile app will be used for the pre-installed UniFi Controller and UniFi Video 4 software. Software Installation The UniFi Controller and UniFi Video 4 software applications are pre-installed on the UniFi CloudKey. Note: You can run the UniFi Controller or UniFi Video software, or you can run both applications simultaneously. Go to the appropriate section for your software application. UniFi Controller Software Use one of the following methods to launch the software:
If you are using Chrome, go to the Chrome Instructions section (recommended). If you are using a different web browser, go to Instructions for Other Web Browsers. Chrome Instructions 1. Ensure that your host system is on the same Layer-2 network as the UniFi CloudKey. 2. Launch the Chrome web browser and type https://unifi.ubnt.com in the address field. Press enter
(PC) or return (Mac). https://unifi.ubnt.com 3. Enter the username and password for your UBNT account. Click Sign In. 4. Click Discover Cloud Key. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30. 5. If the Ubiquiti Device Discovery Tool is already installed, proceed to step 7. If the tool is not installed, you will be prompted to add it. Proceed to step 6. 6. To install the tool:
a. Click Install. b. Click Add app to confirm. 7. The tool will search for the UniFi Cloud Key. Click Adopt in the Cloud Keys Actions column to continue. 8. If the Cloud Key firmware is not the latest version, click Upgrade Firmware to upgrade the firmware. 9. Click Open Controller Wizard to set up the Controller on the Cloud Key. 10. The UniFi Setup Wizard appears. Follow the on-screen instructions. For step-by-step instructions, refer to the User Guide, which is available at www.ubnt.com/download/unifi 11. After the UniFi Setup Wizard is finished, the browser will be redirected to the Cloud Login Credentials screen. Enter your Ubiquiti account email/username and password to enable cloud access. Alternatively, you can click Register now to create a Ubiquiti account. Click Enable Cloud Access. 12. Wait for the UniFi Controller to be adopted, and then click Launch. The UniFi Controller management interface will appear. You can manage your UniFi devices and view network statistics using the UniFi Controller management interface. For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website:
www.ubnt.com/download/unifi Instructions for Other Web Browsers 1. Ensure that your host system is on the same Layer-2 network as the UniFi CloudKey. 2. The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30. 3. Launch the web browser. In the address field, type https://
followed by the appropriate IP address. Press enter (PC) or return (Mac). 4. Click Manage to run the UniFi Setup Wizard. Note: You can click Configure to change the settings of the UniFi Cloud Key (refer toUniFi Cloud Key Configuration). The default login is ubnt/ubnt or root/ubnt. 5. The UniFi Setup Wizard appears. Follow the on-screen instructions. For step-by-step instructions, refer to the User Guide, which is available at www.ubnt.com/download/unifi After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear. Log in with the Admin Name and Password that you created, and then you can manage your UniFi devices and view network statistics using the UniFi Controller management interface. For information on configuring and using the UniFi Controller software, refer to the User Guide. Firmware Update Note: Updating the UniFi Cloud Key firmware will also update the UniFi Controller software. We recommend that you back up your UniFi Controller configuration before updating the UniFi Cloud Key firmware. To upgrade the firmware of the UniFi Cloud Key:
1. Ensure that your host system is on the same Layer-2 network as the UniFi CloudKey. 2. The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30. 3. Launch the web browser. In the address field, type https://
followed by the appropriate IP address. Press enter (PC) or return (Mac). 4. Click Configure to change the settings of the UniFi Cloud Key. 5. Enter the Username and Password (the default login is ubnt/
ubnt). Then click Login. 6. The Main screen will appear. Click Maintenance. 7. You have two options for updating the firmware:
Check for Updates Click Check for Updates to see if there is a newer firmware version. If there is, then you can follow the on-screen instructions to upgrade now. Update Manually Click Update Manually to update the firmware. The Please Confirm Update screen will appear. You have two options for a manual update:
upload file If you have the firmware saved in a specific location, then click Select File to browse for the file. get file from URL If you know the URL of the firmwares location, then enter it in the URL field. Update Click Update to proceed with the update. Cancel Click Cancel to skip the update. UniFi Cloud Key Configuration Login Instructions 1. Ensure that your host system is on the same Layer-2 network as the UniFi CloudKey. 2. The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30. 3. Launch the web browser. In the address field, type https://
followed by the appropriate IP address. Press enter (PC) or return (Mac). 4. Click Configure to change the settings of the UniFi CloudKey. 5. Enter the Username and Password (the default login is ubnt/ubnt). Then click Login. 6. The Main screen will appear. Navigation Bar The UniFi Cloud Key configuration consists of three primary pages:
Main Configuration Maintenance Username At the top right of each screen, click the Username to display the Change Password, Change Username, and Logout options:
Change password To change the password, click
. Old password Enter the current password (the default is ubnt). New password Enter the new password. Confirm password Enter the new password again. Submit Click Submit to apply changes. Cancel Click Cancel to discard changes. Change username To change the username, click
. New password Enter the new username. Submit Click Submit to apply changes. Cancel Click Cancel to discard changes. Logout To manually sign out of the UniFi Cloud Key configuration, click
. Main The Main screen displays basic status information about the UniFi Cloud Key. Status Device Name Displays the hostname or alias of the UniFi Cloud Key. Uptime Displays the duration of time the UniFi Cloud Key has been running. Version Displays the version number of the UniFi Cloud Key firmware. MAC Address Displays the MAC address or hardware identifier of the UniFi Cloud Key. Date Displays the current date and time. UniFi Version Displays the version number of the UniFi Controller software. Status Displays the status of the UniFi Controller software. Disk Space Available Displays the percentage of available disk space. Used Displays the amount of used disk space. Free Displays the amount of available disk space. Total Displays the total amount of disk space. SD Card Available Displays the percentage of available space on the SD card. Used Displays the amount of used space on the SD card. Free Displays the amount of available space on the SD card. Total Displays the total amount of space on the SD card. Configuration The Configuration screen allows you to configure the basic and network settings of the UniFi CloudKey. Basic Settings Device Name Enter a descriptive name or identifier for the UniFi Cloud Key. Also known as a host name. Time Zone Select the appropriate time zone. Reset Button Use of the hardware Reset button on the UniFi Cloud Key is enabled by default. To prevent an accidental reset to default settings, click to toggle Off. Network Settings Configuration Mode Select the appropriate mode: Static for fixed settings or DHCP for automatic configuration by your DHCP server. Static Enter the following information:
-
IP Address Enter the local IP address of the UniFi Cloud Key.
- Netmask Enter the subnet mask of the UniFi Cloud Key.
- Gateway Enter the IP address of the networks gateway router.
- Primary DNS Enter the IP address of the networks
-
primary DNS server. Secondary DNS Enter the IP address of the networks secondary DNS server. DHCP The use of the Dynamic Host Configuration Protocol
(DHCP) is the default. The UniFi Cloud Key automatically acquires network settings from the networks DHCP server.
-
-
Fallback IP Address Enter the IP address for the UniFi Cloud Key to use if an external DHCP server is not found. Fallback Netmask Enter the netmask for the UniFi Cloud Key to use if an external DHCP server is not found. Apply Changes Click Apply Changes to save changes. Discard Click Discard to cancel changes. Maintenance The Maintenance screen contains administrative options. Security Password To change the password, click Change Password. Old password Enter the current password (the default is ubnt). New password Enter the new password. Confirm Password Enter the new password again. Submit Click Submit to apply changes. Cancel Click Cancel to discard changes. Username To change the username, click Change Username. New username Enter the new username. Submit Click Submit to apply changes. Cancel Click Cancel to discard changes. Maintenance Reboot Click Reboot to powercycle the UniFi Cloud Key. Power Off Click Power Off to turn off the UniFi Cloud Key. Reset to Defaults Click Reset to Defaults to reset the UniFi Cloud Key to its factory default settings. This option will reboot the UniFi Cloud Key, and all factory default settings will be restored. Note: We recommend that you back up your UniFi Controller configuration before resetting the UniFi Cloud Key to its defaults. Restore Service While the UniFi Controller software is running, click Stop UniFi to stop it. To restart the software, click Start UniFi to restart it. Restore from file Click Choose File to restore the UniFi Controller from a file you specify. Follow the on-screen instructions. Auto Backup Restore from Auto Backup Click to restore from the automatic backup file. Follow the on-screen instructions. Firmware Version Displays the version number of the UniFi Cloud Key firmware. Check for Updates Click Check for Updates to see if there is a newer firmware version. If there is, then you can follow the on-screen instructions to upgrade now. Note: Updating the UniFi Cloud Key firmware will also update the UniFi Controller software. We recommend that you back up your UniFi Controller configuration before updating the UniFi Cloud Key firmware. Update Manually Click Update Manually to update the firmware. The Please Confirm Update screen will appear. You have two options:
upload file If you have the firmware saved in a specific location, then click Select File to browse for the file. get file from URL If you know the URL of the firmwares location, then enter it in the URL field. Update Click Update to proceed with the update. Cancel Click Cancel to skip the update. UniFi Version Displays the version number of the UniFi Controller software. Check for Updates Click Check for Updates to see if there is a newer software version. If there is, then you can follow the on-screen instructions to upgrade now. Note: We recommend that you back up your UniFi Controller configuration before upgrading the UniFi Controller software. For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website:
www.ubnt.com/download/unifi UniFi Video Software 1. Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key. 2. Launch the Chrome web browser and type https://video.ubnt.com in the address field. Press enter
(PC) or return (Mac). https://video.ubnt.com 3. Click Sign In to log into your UBNT account. 4. Click Get Started and follow the on-screen instructions. For information on configuring and using the UniFi Video software, refer to the User Guide on the website:
www.ubnt.com/download/unifivideo HDD Replacement A 1 TB HDD is pre-installed. If you want to replace it, you must use a 2.5 hard drive and then follow these instructions:
1. Back up data from the UniFi Cloud Key. 2. Power off the UniFi Cloud Key to prevent any software disruption. 3. On the bottom of the UniFi Cloud Key, slide the HDD Latch to release the HDD bay tray. 4. Pull one side of the tray away from the HDD to remove it. 5. Insert the replacement HDD at an angle into the tray and then press the HDD into place. 6. Push the HDD bay tray back into the case. Specifications Dimensions Weight Enclosure Management Interface Hard Drive Capacity eMMC Memory Networking Interface Buttons LEDs Power Method Power Supply Supported Voltage Range Max. Power Consumption Operating Temperature Operating Humidity Certifications UCK-G2-PLUS 131.16 x 27.10 x 134.20 mm
(5.16 x 1.07 x 5.28") 582 g (1.28 lb) Anodized Aluminum UniFi UniFi Video 1 TB 32 GB
(1) 10/100/1000 Ethernet Port
(1) Power
(1) Reset
(1) Power, White/Blue Standard 802.3af PoE or 9VDC, 2A Standard 802.3af PoE or 9VDC, 2A Standard 802.3af PoE or 9VDC, 2A 12.95W (PoE) 18W (Adapter) 0 to 35 C
(32 to 104 F) 20 to 80% Noncondensing CE, FCC, IC Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Limited Warranty UBIQUITI NETWORKS, Inc (UBIQUITI NETWORKS) warrants that the product(s) furnished hereunder (the Product(s)) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term. Warranty Conditions The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks authorized representatives, or as approved by Ubiquiti Networks in writing;
has been painted, rebranded or physically modified in any way;
has been damaged due to errors or defects in cabling;
has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
has been damaged or impaired as a result of using third party firmware;
has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or has not been received by Ubiquiti within 30 days of issuance of the RMA.
(II)
(III)
(IV)
(V)
(VI)
(VII) In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed. Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYERS EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyers selection of products (including the Products) for buyers application and/or failure of products (including the Products) to meet government or regulatory requirements. Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This radio transmitter (FCC: SWX-UCKG2P) has been approved by FCC. ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-UCKG2P) has been approved by ISED Canada. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. 2. lappareil ne doit pas produire de brouillage;
lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (IC : 6545A-UCKG2P) a t approuv par ISDE Canada. Battery Warning 1. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight. 2. Do not use any cell or battery which is not designed for use with the equipment. 3. Always purchase the battery recommended by the device manufacturer for the equipment. 4. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter, except as listed for this products certification. Les antennes utilises pour cet metteur doit tre install pour fournir une distance de sparation dau moins 20 cm de toutes les personnes et ne doit pas tre situ ou oprant en conjonction avec une autre antenne ou un autre metteur, sauf dans les cas numrs la certification de ce produit. Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Country List AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK BFWA (Broadband Fixed Wireless Access) members noted in blue Note: This device meets Max. TX power limit per ETSI regulations. The following apply to products that operate in the 5 GHz frequency range:
Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states. Note: All countries listed may operate at 30 dBm. BFWA member states may operate at 36 dBm. Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Deutsch Die Europische Richtlinie 2012/19/EU verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Espaol La Directiva 2012/19/UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto. Franais La directive europenne 2012/19/UE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Declaration of Conformity
[Bulgarian] UBIQUITI NETWORKS , UCK-G2-PLUS 2014/53/.
:
www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa UCK-G2-PLUS u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: www.ubnt.com/compliance etina [Czech] Tmto UBIQUITI NETWORKS prohlauje, e typ rdiovho zazen UCK-G2-PLUS je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: www.ubnt.com/compliance Dansk [Danish] Hermed erklrer UBIQUITI NETWORKS, at radioudstyrstypen UCK-G2-PLUS er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: www.ubnt.com/compliance Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur UCK-G2-PLUS conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
www.ubnt.com/compliance English Hereby, UBIQUITI NETWORKS declares that the radio equipment type UCK-G2-PLUS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance Eesti keel [Estonian] Kesolevaga deklareerib UBIQUITI NETWORKS, et kesolev raadioseadme tp UCK-G2-PLUS vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: www.ubnt.com/compliance Suomi [Finnish] UBIQUITI NETWORKS vakuuttaa, ett radiolaitetyyppi UCK-G2-PLUS on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/compliance Franais [French] Le soussign, UBIQUITI NETWORKS, dclare que lquipement radiolectrique du type UCK-G2-PLUS est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante: www.ubnt.com/compliance Deutsch [German] Hiermit erklrt UBIQUITI NETWORKS, dass der Funkanlagentyp UCK-G2-PLUS der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: www.ubnt.com/compliance
[Greek] / UBIQUITI NETWORKS, UCK-G2-PLUS 2014/53/.
: www.ubnt.com/compliance Magyar [Hungarian] UBIQUITI NETWORKS igazolja, hogy a UCK-G2-PLUS tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: www.ubnt.com/compliance slenska [Icelandic] Hr me lsir UBIQUITI NETWORKS yfir v a UCK-G2-PLUS er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Fullur texti ESB samrmisyfirlsing er a finna eftirfarandi netfangi: www.ubnt.com/compliance Italiano [Italian] Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio UCK-G2-PLUS conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet: www.ubnt.com/compliance Latvieu valoda [Latvian] Ar o UBIQUITI NETWORKS deklar, ka radioiekrta UCK-G2-PLUS atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn:
www.ubnt.com/compliance Lietuvi kalba [Lithuanian] A, UBIQUITI NETWORKS, patvirtinu, kad radijo rengini tipas UCK-G2-PLUS atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas iuo interneto adresu: www.ubnt.com/compliance Malti [Maltese] Bdan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta tagmir tar-radju UCK-G2-PLUS huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformit tista tii kkonsultata minn www.ubnt.com/compliance Norsk [Norwegian] UBIQUITI NETWORKS erklrer herved at utstyret UCK-G2-PLUS er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklringen er tilgjengelig p flgende internettadresse:
www.ubnt.com/compliance Polski [Polish] UBIQUITI NETWORKS niniejszym owiadcza, e typ urzdzenia radiowego UCK-G2-PLUS jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.ubnt.com/compliance Portugus [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rdio UCK-G2-PLUS est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet: www.ubnt.com/compliance Romn [Romanian] Prin prezenta, UBIQUITI NETWORKS declar c tipul de echipamente radio UCK-G2-PLUS este n conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: www.ubnt.com/compliance Slovenina [Slovak] UBIQUITI NETWORKS tmto vyhlasuje, e rdiov zariadenie typu UCK-G2-PLUS je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: www.ubnt.com/compliance Slovenina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme UCK-G2-PLUS skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance Espaol [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioelctrico UCK-G2-PLUS es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente:
www.ubnt.com/compliance Svenska [Swedish] Hrmed frskrar UBIQUITI NETWORKS att denna typ av radioutrustning UCK-G2-PLUS verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress:
www.ubnt.com/compliance Online Resources Website www.ubnt.com Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA 2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCable, UniFi, and UniFi Video are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, the Google Play logo and other marks are trademarks of Google Inc. All other trademarks are the property of their respective owners. JLAJ041218
This product uses the FCC Data API but is not endorsed or certified by the FCC