M5 OEM Users Guide TECH SPECS Processor Specs Memory Information Networking Interface Wireless Approvals RoHS Compliance SYSTEM INFORMATION Atheros MIPS 24KC, 400MHz 64MB SDRAM, 8MB Flash 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES OPERATING FREQUENCY 5745MHz-5825MHz a 1 1 n 1 1 z H G 5 5GHz TX POWER SPECIFICATIONS DataRate 1-24Mbps 36Mbps 48Mbps 54Mbps MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 Avg. TX 27 dBm 25 dBm 23 dBm 22 dBm 27 dBm 27 dBm 27 dBm 27 dBm 26 dBm 24 dBm 22 dBm 21 dBm 27 dBm 27 dBm 27 dBm 27 dBm 26 dBm 24 dBm 22 dBm 21 dBm Tolerance
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB a 1 1 n 1 1 z H G 5 5GHz RX SPECIFICATIONS DataRate 24Mbps 36Mbps 48Mbps 54Mbps Sensitivity
-83 dBm
-80 dBm
-77 dBm
-75 dBm Tolerance
+/-2dB
+/-2dB
+/-2dB
+/-2dB MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15
-96 dBm
-95 dBm
-92 dBm
-90 dBm
-86 dBm
-83 dBm
-77 dBm
-74 dBm
-95 dBm
-93 dBm
-90 dBm
-87 dBm
-84 dBm
-79 dBm
-78 dBm
-75 dBm
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration PHYSICAL / ELECTRICAL / ENVIRONMENTAL 16cm length x 8cm width x 3cm height 0.5 kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 6.5 Watts 24V, 1A POE Supply Included Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-30C to 75C 5 to 95% Condensing ETSI300-019-1.4 COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least 252cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This equipment is required to be professionally installed The device has been designed to operate with the antennas listed below and having a maximum gain of 30dBi. Antennas not included in this list or having a gain greater than 30dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms 2x2 Point-To-Point Use Ubiquiti RD-5G-30 Ubiquiti RP-5G-24 Ubiquiti AMS-5G-20 1x1 Point-To-Point Use Ubiquiti AG-5G-30 2x2 Point-To-MultiPoitn Use Ubiquiti O-5G-7 Operation is restricted to Point-To-Point use for antenass other than the Ubiquiti O-5G-7 listed above.