UniFi_ULED-AC_QSG_V06_09-27-18.indd (2.75 x 4.5) -- Spread 1 of 2 -- Thu Sep 27 2018 16:14:38 -- NUpConsecutive UniFi_ULED-AC_QSG_V06_09-27-18.indd (2.75 x 4.5) -- Spread 1 of 2 -- Thu Sep 27 2018 16:14:38 -- NUpConsecutive Introduction Thank you for purchasing the Ubiquiti Networks UniFiLED Panel. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Installation Requirements Phillips screwdriver Wire stripper/cutter Needle-nose pliers (Optional) IMPORTANT: The ULED-AC is to be installed by a qualified electrician in accordance with local electrical codes and regulations. IMPORTANT : Le ULED-AC doit tre install par un lectricien qualifi conformment aux codes lectriques locaux et des rglements. WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn off power at the circuit breaker or fuse before installing. AVERTISSEMENT : POUR VITER TOUT RISQUE D'INCENDIE, D'LECTROCUTION OU DE DCS;
coupez le courant au niveau du disjoncteur ou du coupe-circuit ou fusible avant l'installation. Package Contents UniFi LED Panel Quick Start Guide LED Network-Managed LED Panel Powered by AC Model: ULED-AC System Requirements Network switch (for wired configuration), or access point (for wireless configuration) UniFi LED mobile app software Mobile device: iOS 10 or Android 5.0 UniFi LED Controller software Computer: UniFi Application Server 0.5.0, Ubuntu 16.04 LTS (Xenial Xerus) 64-bit or Debian 9 64-bit Web browser: Google Chrome (Other browsers may have limited functionality.) UniFi Dimmer Switch, model UDIM-AC or UDIM-AT TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Button LED Network-Managed LED Panel Powered by AC Model: ULED-AC Hardware Overview LED Status LED Reset Network Topology Requirements Network topology requirements are as follows:
DHCP-enabled network (for the UniFi LED Panel to obtain an IP address) Network switch (for wired configuration), or access point (for wireless configuration) For UniFi Dimmer Switch only:
A UniFi Dimmer Switch connected to the same Layer 2 network as the UniFi LED Panel For LED Controller software:
A UniFi Application Server running the UniFi LED Controller software and connected to the same Layer 2 network as a the UniFi LED Panel For UniFi LED app only:
A UniFi AP connected to the same Layer 2 network as the UniFi LED Panel Connection Options A UniFi LED Panel can use either a wired connection or a wireless connection. A wired connection to a switch allows immediate detection and control by the LED Controller, but if a panel is in a location where Ethernet cabling is not a reasonable option, then the panel can connect via Wi-Fi to a UniFi AP. Control Options You can control the UniFi LED Panels state (on/off) and brightness. There are three ways to control the Panel:
UniFi Dimmer Switch A user in the immediate vicinity controls the UniFi LED Panel using the UniFi Dimmer Switch. UniFi LED App over Layer 2 Network A local user runs the app to connect to a UniFi AP on the same Layer 2 network as the UniFi LED Panel. UniFi LED Controller over Layer 2 Network Alocal user runs the LED Controller software on the same Layer 2 network as the UniFi LED Panel. UAP-AC-PRO 100-277VAC Ethernet 100-277VAC ULED-AC UAP-AC-PRO For installations using multiple UniFi LED Panels in a wired configuration, we recommend using a daisy chain topology, asillustrated in the following diagram. ULED-AC Daisy-Chain Configuration UniFi LED App 802.3af PoE OR 100-277VAC UDIM-AT UDIM-AC UniFi PoE Switch UniFi LED Controller LAN WAN USG-XG-8
(DHCP Server) UniFi Application Server 802.3af PoE UDIM-AT UniFi LED App UniFi PoE Switch UniFi LED Controller UniFi Application Server LAN WAN USG-XG-8
(DHCP Server) Internet Sample Network Diagram - Wireless Topology Internet Sample Network Diagram - Wired Topology
(Additional LED Panels) Ethernet 100-277VAC ULED-AC Ethernet 100-277VAC ULED-AC 802.3af PoE UDIM-AT UniFi Application Server UniFi PoE Switch UniFi EoT Controller LAN WAN USG-XG-8
(DHCP Server) Internet Daisy Chain Topology - Sample Network Diagram Installation To install and configure the UniFi LED Panel:
1. Lift the panel and seat it in an opening in the ceiling grid. 4. Remove a knockout from the Junction Box and feed the power cable through the knockout into the Junction Box. ULED-AC-XXXXXX ULED-AC-XXXXXX State Status Flashing White Initializing. Steady White System ready. Steady Blue Adopted by LED Controller. Alternating White/Blue Ports Firmware upgrade is taking place. Ethernet Reset The Reset button serves two functions:
Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Terminal Block ULED-AC-XXXXXX 2. If the panel will use Wi-Fi to connect to the network, go to step 3. If the panel will use a wired connection to the network, connect an Ethernet cable to the Main port. 5. Connect each of the cables wires to the appropriate Terminal Block connector as follows:
Connect the Neutral (white) wire to N. Connect the Live (red) wire to L. Connect the Earth ground (green) wire to
. Note: To connect a wire, push it into the Terminal Block connector until it is securely held. To release a wire, push the button next to it. Note: We recommend using UL-certified 14 AWG single-core copper wire. Daisy Chain Configuration (Optional) Configuring the UniFi LED Panel UniFi LED Controller Software For each additional panel in the chain:
1. Make the following changes to the UniFiLED Panel which is currently the last panel in the chain:
a. If the new panel will use a wired connection to the network, connect an Ethernet cable to the Secondary port of the current last UniFiLED Panel. Follow the instructions for the software you wish to use:
UniFi LED App 1. Install the UniFi LED app on your smartphone or mobile device. The app is available from the App Store or GooglePlay Store. 1. Install the latest version of the UniFi LED Controller software on a computer on the same Layer 2 network as the UniFi LED Panel:
Ubuntu users Download the software from:
www.ubnt.com/download/unifi-led UAS users Install the software using the UniFi Application Server (UAS) management console. 2. Launch a web browser and go to: http://localhost:20080 Secondary Port of current last ULED-AC in the chain 2. Enable Bluetooth on your mobile device. 3. Launch the app. b. Connect a stripped power cable to the Terminal Block on the UniFiLED Panel: Neutral (white) to N, Live (red) to L, and Earth ground (green) to
. To new ULED-AC in chain 3. The UniFi LED Controller will appear, allowing you to configure the UniFi LED Panel and customize other settings. For additional details on the UniFi LED Controller, refer to the User Guide available at:
www.ubnt.com/download/unifi ULED-AC-XXXXXX MAC Sticker Ethernet Use these 10/100 Ethernet ports to connect to the LAN or to daisy-chain with other UniFi LED Panels. MAC Sticker Used to scan the MAC address. For details, refer to Quick Setup. N L Connections for AC power: N(Neutral), L(Live), and
(Earth ground). Each has two connectors, used to connect to the power source, and optionally to connect to another UniFiLED Panel (daisy-chain configuration). 3. Remove the screw from the cover of the Junction Box and open the cover. 2. Connect the new panel as described in steps 2-5 of Installation. 4. If the UniFi LED Panel has a wired connection, it will be automatically detected and shown on the UniFi LED app. If the UniFi LED Panel will be connected wirelessly, follow the on-screen instructions to locate and connect it to your wireless network.
*640-00340-06*
640-00340-06 E L N UniFi_ULED-AC_QSG_V06_09-27-18.indd (2.75 x 4.5) -- Spread 2 of 2 -- Thu Sep 27 2018 16:14:38 -- NUpConsecutive UniFi_ULED-AC_QSG_V06_09-27-18.indd (2.75 x 4.5) -- Spread 2 of 2 -- Thu Sep 27 2018 16:14:38 -- NUpConsecutive Install the LED Panels and Dimmer Switches For each UniFi LED Panel or Dimmer Switch:
1. Remove the MAC Sticker from the back of the device by carefully peeling back and pulling the blue tab. Scan the QR Codes 1. On your mobile device, open the UniFi LED app. 2. Go to the More screen. Tap Quick Setup. Quick Setup This section describes the Quick Setup procedure for installations with large numbers of UniFi LED Panels and Dimmer Switches. The Quick Setup requires using the UniFi LED app along with a QR Code Log that you create. Each UniFi LED Panel or Dimmer Switch has a removable MAC Sticker on its reverse side; this has a QR code used to scan the devices MAC address. The Quick Setup consists of these steps:
Create the QR Code Log Install the LED Panels and Dimmer Switches Scan the QR codes Create the QR Code Log 1. Download the QR Code Log template at:
ubnt.link/QR-Code-Log 2. Print out as many copies as needed (each sheet can log up to 16 LED Panels and 3Dimmer Switches). QR Code Log Site:
Controller:
UDIM-AT-XXXXXX Remove the QR codes by lifting at the blue arrows and place them on this QR Code Log. 2. Place the sticker on the QR Code Log sheet that matches the devices location. QR Code Log ULED-AC-XXXXXX Site:
Controller:
UDIM-AT-XXXXXX arrows and place them on this QR Code Log. 3. Follow the instructions as the UniFi LED app guides you through the process of adding devices by scanning the QR codes on the QR Code Log sheet(s). Note: Instead of scanning the QR codes, you can also use the UniFi LED apps Locate function to identify and assign individual LED Panels to their groups; however, this is best suited for smaller installations. Lighting Initial Delivered Luminance
(Typical) Efficacy CCT L80 CRI Beam Angle Brightness Control Environment Specifications Dimensions Weight Networking Interface Wireless Security Connectivity Buttons LEDs Power Method Supported Voltage Range Max. Power Consumption Mounting Operating Temperature Operating Humidity Certifications ULED-AC 602 x 602 x 56.7 mm
(23.7 x 23.7 x 2.23") 5.3 kg (11.68 lb) 802.11 b/g/n (2.4 GHz Only) 10/100 Ethernet Port WEP, WPA/WPA2 Personal Wi-Fi 802.11 b/g/n, Bluetooth LE 4.1 Reset Status AC Input 100-277VAC 50/60 Hz 34W Standard T-Grid 0 to 40 C (32 to 104 F) 10 to 90% Noncondensing CE, FCC, IC 3400 lm 100 lm/W 4,000 K
> 50,000 hrs
> 80 114 10-100% Dimming Indoor Dry Location Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: The ULED-AC is to be installed by a qualified electrician in accordance with local electrical codes and regulations. AVERTISSEMENT : Le ULED-AC doit tre install par un lectricien qualifi conformment aux codes lectriques locaux et des rglements. WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn off power at the circuit breaker or fuse before installing. AVERTISSEMENT : POUR VITER TOUT RISQUE DINCENDIE, DLECTROCUTION OU DE DCS; coupez le courant au niveau du disjoncteur ou du coupe-circuit ou fusible avant linstallation. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. 3. Fill in the Site (such as 1st Floor Meeting Room) and Controller (such as UniFi LED Controller) on each sheet. 3. Install the device as decribed in the Installation section of the devices Quick Start Guide. Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This radio transmitter FCC ID: SWX-ULEDACR has been approved by FCC. ISED Canada RoHS/WEEE Compliance Statement CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-ULEDACR) has been approved by ISED Canada. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. 2. lappareil ne doit pas produire de brouillage;
lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (IC : 6545A-ULEDACR) a t approuv par ISDE Canada. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur. Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Note: This device meets Max. TX power limit per ETSI regulations. English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Deutsch Die Europische Richtlinie 2012/19/EU verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Espaol La Directiva 2012/19/UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto. Franais La directive europenne 2012/19/UE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Declaration of Conformity
[Bulgarian] UBIQUITI NETWORKS , ULED-AC 2014/53/.
:
www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa ULED-AC u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: www.ubnt.com/compliance etina [Czech] Tmto UBIQUITI NETWORKS prohlauje, e typ rdiovho zazen ULED-AC je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: www.ubnt.com/compliance Dansk [Danish] Hermed erklrer UBIQUITI NETWORKS, at radioudstyrstypen ULED-AC er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: www.ubnt.com/compliance Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur ULED-AC conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
www.ubnt.com/compliance English Hereby, UBIQUITI NETWORKS declares that the radio equipment type ULED-AC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance Eesti keel [Estonian] Kesolevaga deklareerib UBIQUITI NETWORKS, et kesolev raadioseadme tp ULED-AC vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: www.ubnt.com/compliance Suomi [Finnish] UBIQUITI NETWORKS vakuuttaa, ett radiolaitetyyppi ULED-AC on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/compliance Franais [French] Le soussign, UBIQUITI NETWORKS, dclare que lquipement radiolectrique du type ULED-AC est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante: www.ubnt.com/compliance Deutsch [German] Hiermit erklrt UBIQUITI NETWORKS, dass der Funkanlagentyp ULED-AC der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: www.ubnt.com/compliance
[Greek] / UBIQUITI NETWORKS, ULED-AC 2014/53/.
: www.ubnt.com/compliance Magyar [Hungarian] UBIQUITI NETWORKS igazolja, hogy a ULED-AC tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: www.ubnt.com/compliance slenska [Icelandic] Hr me lsir UBIQUITI NETWORKS yfir v a ULED-AC er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Fullur texti ESB samrmisyfirlsing er a finna eftirfarandi netfangi: www.ubnt.com/compliance Italiano [Italian] Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio ULED-AC conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet: www.ubnt.com/compliance Latvieu valoda [Latvian] Ar o UBIQUITI NETWORKS deklar, ka radioiekrta ULED-AC atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn:
www.ubnt.com/compliance Lietuvi kalba [Lithuanian] A, UBIQUITI NETWORKS, patvirtinu, kad radijo rengini tipas ULED-AC atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas iuo interneto adresu: www.ubnt.com/compliance Limited Warranty UBIQUITI NETWORKS, Inc (UBIQUITI NETWORKS) warrants that the product(s) furnished hereunder (the Product(s)) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term. Warranty Conditions The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks authorized representatives, or as approved by Ubiquiti Networks in writing;
has been painted, rebranded or physically modified in any way;
has been damaged due to errors or defects in cabling;
(II)
(III)
(IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
has been damaged or impaired as a result of using third party firmware;
(V)
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed. Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty Malti [Maltese] Bdan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta tagmir tar-radju ULED-AC huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformit tista tii kkonsultata minn www.ubnt.com/compliance Norsk [Norwegian] UBIQUITI NETWORKS erklrer herved at utstyret ULED-AC er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklringen er tilgjengelig p flgende internettadresse:
www.ubnt.com/compliance Polski [Polish] UBIQUITI NETWORKS niniejszym owiadcza, e typ urzdzenia radiowego ULED-AC jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.ubnt.com/compliance Portugus [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rdio ULED-AC est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet:
www.ubnt.com/compliance Romn [Romanian] Prin prezenta, UBIQUITI NETWORKS declar c tipul de echipamente radio ULED-AC este n conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: www.ubnt.com/compliance Slovenina [Slovak] UBIQUITI NETWORKS tmto vyhlasuje, e rdiov zariadenie typu ULED-AC je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: www.ubnt.com/compliance Slovenina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme ULED-AC skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance Espaol [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioelctrico ULED-AC es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente:
www.ubnt.com/compliance Svenska [Swedish] Hrmed frskrar UBIQUITI NETWORKS att denna typ av radioutrustning ULED-AC verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: www.ubnt.com/compliance Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYERS EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyers selection of products
(including the Products) for buyers application and/or failure of products
(including the Products) to meet government or regulatory requirements. Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Online Resources Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA w w w . u b n t . c o m 2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCable, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, the Google Play logo and other marks are trademarks of Google Inc. All other trademarks are the property of their respective owners. AI092718