all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.60 MiB | / April 04 2018 | |||
1 | Cover Letter(s) | / June 10 2017 | ||||||
1 | External Photos | / April 04 2018 | ||||||
1 | Internal Photos | / April 04 2018 | ||||||
1 | Internal Photos | / April 04 2018 | ||||||
1 | Internal Photos | / April 04 2018 | ||||||
1 | ID Label/Location Info | / June 10 2017 | ||||||
1 | Cover Letter(s) | / June 10 2017 | ||||||
1 | RF Exposure Info | / June 10 2017 | ||||||
1 | Test Report | / June 10 2017 | ||||||
1 | Test Setup Photos | / April 04 2018 |
1 | User Manual | Users Manual | 4.60 MiB | / April 04 2018 |
Enterprise 10G Gateway Router with DPI Model: USG-XG-8 Introduction Thank you for purchasing the Ubiquiti Networks UniFi Security Gateway XG. This Quick Start Guide is designed to guide you through installation and also includes warrantyterms. Package Contents UniFi Security Gateway XG Mounting Brackets (Qty. 2) Bracket Screws
(Qty. 8) Mounting Screws (Qty. 4) Cage Nuts
(Qty. 4) Rubber Feet (Qty. 4) Power Cord Quick Start Guide Enterprise 10G Gateway Router with DPI Model: USG-XG-8 UniFi Controller System Requirements Linux, MacOSX, or Microsoft Windows 7/8/10 Java Runtime Environment 7 (or above) Web Browser: Google Chrome (Other browsers may have limited functionality) UniFi Controller software v5.6 or higher (available at:
www.ubnt.com/download/unifi) IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power. TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional installers responsibility to follow local country regulations and indoor cabling requirements. Network Requirement A UniFi Cloud Key or management station running the UniFi Controller software, located either on-site and connected to the same Layer-2 network, or off-site in the cloud or NOC UniFi Application Server
(UniFi Controller) UAP-AC-PRO UAP-AC-HD 1G 1G UniFi Switch UniFi Switch LAN USG-XG-8 WAN UAP-AC-M-PRO CURRENT SITE Default USERNAME admin Internet 25 59 7 0.9 0 7 msec LATENCY 116 200+
2 0.2 0.01 7 22 54 0.94 2.33 Mbps 118 229 413 0 THROUGHPUT 700+
WAN 1 ACTIVE DEVICE Inactive 0 Pending 0 LAN 7 ACTIVE DEVICES Inactive 0 Pending 0 WLAN 118 ACTIVE DEVICES Inactive 0 Pending 0 SPEED TEST DOWNLOAD THROUGHPUT & LATENCY DEVICES ON 2.4 GHZ CHANNEL
]
s p b M
[
t u p h g u o r h T 250 200 150 100 50 0 24 HRS 12 HRS UPLOAD THROUGHPUT & LATENCY Avg/Max Throughput Latency
]
s p b M
[
t u p h g u o r h T 100 80 60 40 20 0 24 HRS DEVICES 12 HRS CLIENTS 126 DEVICES WLAN LAN WAN 118 7 1 1172 CLIENTS Motorola Lenovo SamsungE Dell Acer Other NOW NOW 10 8 6 4 2 0 10 8 6 4 2 0 L a t e n c y
[
m s e c
]
L a t e n c y
[
m s e c
]
258 241 220 213 130 110 1 2 3 4 5 6 7 8 9 10 11 DEVICES ON 5 GHZ CHANNEL 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165 DEEP PACKET INSPECTION 645 GB TRAFFIC Network Protocols Streaming Media Web / Web 2.0 File Transfer Social Network Other 582 GB 23.3 GB 22.7 GB 8.47 GB 3.6 GB 5.46 GB Remote Access to UniFi Controller Sample Network Diagram All UniFi devices support off-site management controllers. For setup details, see the User Guide on our website at:
www.ubnt.com/download/unifi Hardware Overview Front Panel Ports USB SFP+
RJ45 microSD Console Interface microSD USB Description Reserved for future use. Reserved for future use. Console RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9 serial console cable, also known as a rollover cable, to connect the Console port to your computer. Then configure the following settings as needed:
Baud rate 115200 Data bits 8 Parity NONE Stop bits 1 Flow control NONE SFP+
(Ports 1-8) RJ45
(Port 0) SFP+ ports are hot-swappable and support 10 Gbps fiber SFP modules. RJ45 port supports 10/100/1000 Ethernet connections. Front Panel System LED System State White Blue Status Factory defaults, waiting for integration. Successfully integrated into a network and working properly. Flashing White Bootup in progress. Flashing Blue Firmware upgrade is taking place. Front Panel LCD Display LCD Display 1 2 378.9 Mbps 535.1 Mbps 378.9 Mbps 682.1 Mbps 1G 3 35.7 Mbps 222.9 Mbps 5 6
/
/
10G 7 8
# 1 WAN1 192.168.1.1 192.168.122.22 192.168.12.32 0 829.3 Mbps 934.9 Mbps 32d 1h 52m 5s 726 CLIENTS USG-XG 192.168.99.233 1.6 Gbps 5.9 Gbps 2.2 Gbps 3.8 Gbps Port Screen Ports 1-4 Ports 5-8 System and Interfaces 1 2 378.9 Mbps 535.1 Mbps 378.9 Mbps 682.1 Mbps 1G 3 35.7 Mbps 222.9 Mbps 5 6
/
/
10G 7 8
# 1 WAN1 192.168.1.1 192.168.122.22 192.168.12.32 0 829.3 Mbps 934.9 Mbps 32d 1h 52m 5s 726 CLIENTS USG-XG 192.168.99.233 1.6 Gbps 5.9 Gbps 2.2 Gbps 3.8 Gbps Port 0 Section of LCD Information Displayed Information on each SFP+ port:
Port Speed 1G or 10G Note: There are two groups of ports:
ports 1-4 and ports 5-8. All ports in each group operate at the same speed. For example, if port 1 is set to 1G, then ports 2-4 will also operate at 1G. Ports 1-4, Ports 5-8 System and SFP+
Port 0 Port Number 1 to 8 Interface Type
- Primary WAN;
- Other WAN; No icon - LAN port Throughput Upload (blue) and download
(green) throughput speeds
/ Port is disconnected X Port is disabled A white outline indicates the currently selected port. Information on the selected SFP+ port:
# <port><interface> Port: 1 to 8; Interface:
WAN or LAN followed by the WAN/LAN number IP address(es) assigned to the port Uptime if port is up; or Disabled or Disconnected if port is down Number of clients (active connections) Information on RJ45 port 0:
Interface Type
- Primary WAN;
- Other WAN; No icon - LAN port Throughput Upload (blue) and download
(green) throughput speeds IP address of the Primary WAN Statistics Screen Statistics System Details THROUGHPUT 5.4 Gbps 12.1 Gbps BYTES 21.3 GB 284 GB PACKETS 71.8 M 1.59 G USG-XG 3 743 Section of LCD Information Displayed 192.168.99.233 34%
CPU RAM 34%
LATENCY MS CLIENTS TMP. 34oc Statistics System Details Statistics on uploaded (blue) and downloaded
(green) data:
Throughput Total throughput speed in bps/kbps/Mbps/Gbps Bytes Total bytes (B)*
Packets Total packets*
Bar Graphs Plots of data uploaded and downloaded Information on the system:
Host name IP address of the primary WAN port Latency in ms for the Primary WAN or selected port Number of clients (active connections) for the Primary WAN or selected port CPU and RAM usage percentage (red indicates usage of 90% or greater) Temperature of CPU in C (red indicates temperature of 85 C or greater)
* Units:
k = 210 = 1024 M = 220 1,000,000 G = 230 1,000,000,000 T = 240 1,000,000,000,000 P = 250 1,000,000,000,000,000 Front Panel Button Button Reset Reset Description Resets to factory defaults. The UniFi Security Gateway XG should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the System LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Security Gateway XG will automatically reboot. Back Panel Fans AC/DC PSU 2 PSU Module Module Bay The USG-XG-8 includes one hot-swappable AC/DC PSU module. An optional AC/DC PSU module can be installed in the PSU 2 Module Bay. You also have the option to use a DC/DC PowerModule, model RPS-DC-100W (sold separately). Note: There are ventilation holes on the sides of the UniFi Security Gateway XG. Installation Requirements Phillips screwdriver Standard-sized, 19" wide rack with a minimum of 1U height available For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use. For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.com/toughcable WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Note: Although the cabling can be located outdoors, the UniFi Security Gateway XG itself should be housed inside a protective enclosure. Hardware Installation The UniFi Security Gateway XG can be placed on a horizontal surface, mounted on a wall, or mounted on a rack. WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. 1. Attach the Mounting Brackets to the UniFi Security GatewayXG. 2. Attach the UniFi Security Gateway XG to the rack using the four Mounting Screws. (If the rack has square slots, then use the Cage Nuts with the Mounting Screws.) 3. Connect the Power Cord to the AC/DC PSU Module. 4. Connect the other end of the Power Cord to a power outlet. Connecting Ethernet to LAN Connect a U Fiber 10Gbps SFP+ optical module and fiber optic patch cable to SFP+ port 1. For detailed instructions on using SFP+ ports, refer to Using SFP+ Ports. Using SFP+ Ports Note: Each SFP+ port requires a U Fiber 10 Gbps SFP+
optical module and a fiber optic patch cable. For information about compatible fiber SFP+ modules, visit: community.ubnt.com/unifi To use an SFP+ port:
1. Remove the protective plug covering the SFP+ port. 2. Plug a compatible fiber module into the SFP+ port. 3. Connect a fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber device.
*640-00305-03*
640-00305-03 Initial Setup via Bluetooth Use the UniFi Mobile app to configure the UniFi Security Gateway XG. 1. Download the UniFi Mobile app from the AppStore (iOS) or Google Play (Android). 2. Enable Bluetooth on your mobile device. 3. Launch the app and hold your mobile device within 1.5m
(5') of the UniFi Security Gateway XG. 4. Follow the on-screen instructions to set up the UniFi Security Gateway XG. Software Installation Download the latest version of the UniFi Controller software at: www.ubnt.com/download/unifi From a management station connected to the same Layer-2 network, launch the installer and follow the on-screen instructions. Note: If you already have UniFi Controller v5.6 or higher installed, go to the section, Adopting the UniFi Security Gateway XG. After you have installed the software and run the UniFi Setup Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created in the UniFi Setup Wizard. Then click Login. You can manage your network and view network statistics using the UniFi Controller management interface. For information on using the UniFi Controller software, refer to the User Guide located on our website at:
www.ubnt.com/download/unifi Configuring the WAN and LAN Interfaces Before Adoption Prior to adopting the UniFi Security Gateway XG, you can access its Configuration Interface via a web browser to configure the WAN and LAN interfaces and the inform URL. By default, the WAN port is set to DHCP so it can obtain its network settings from the service provider. The LAN port is set to a static IP of 192.168.1.1/24 with DHCP Server enabled. If the UniFi controller is on the local network, access the Configuration Interface and configure the LAN ports IP Address to be on the same subnet as your controller. To change the interface settings, connect a computer (through a switch) to SFP+ port 1 of the UniFi Security Gateway XG. 1. From a web browser, go to: https://setup.ubnt.com https://setup.ubnt.com 2. The UniFi Security Gateway XG Settings window will appear. Click Configuration to continue. 3. In the Configuration window, configure the WAN Settings, LAN Settings, and Inform URL as needed. 4. Click Apply Changes to save the changes. Adopting the UniFi Security Gateway XG 1. From the UniFi Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UniFi Security GatewayXG in the list of devices under the Model column. To adopt it, click Adopt. 3. The System LED on the UniFi Security Gateway XG will turn blue to confirm that it is successfully adopted. Specifications USG- XG-8 Dimensions Weight With Mount Brackets Max. Power Consumption Power Supply Supported Voltage Range System LED LCD Processor System Memory On-Board Flash Storage Rackmount ESD/EMP Protection Operating Temperature Operating Humidity Certifications Interfaces Networking Management 442.4 x 285.6 x 43.7 mm
(17.42 x 11.24 x 1.72") 4.435 kg (9.78 lb) 4.535 kg (9.98 lb) AC/DC 100W
(2) Hot-Swappable AC/DC or DC/DC 100W PSU
(1 AC/DC PSU Included) 100 - 240VAC Status 4.7" Wide-Viewing Angle True Color TFT-LCD Touch Screen MIPS64 16-Core, 1.8 GHz 16 GB DDR4 RAM 4 GB Yes, 1U Air: 24 kV, Contact: 24 kV
-5 to 40 C (23 to 104 F) 5 to 95% Noncondensing CE, FCC, IC
(8) 10 Gbps SFP+ Ports,
(1) 1 Gbps RJ45 Ethernet Port
(1) RJ45 Ethernet In-Band,
(1) RJ45 Serial Out-of-Band,
(1) Bluetooth 4.0 Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. 3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet. a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire. b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death. c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment. d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed in accordance with local national wiring rules and regulations. Limited Warranty UBIQUITI NETWORKS, Inc (UBIQUITI NETWORKS) warrants that the product(s) furnished hereunder (the Product(s)) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term. Warranty Conditions The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks authorized representatives, or as approved by Ubiquiti Networks in writing;
has been painted, rebranded or physically modified in any way;
has been damaged due to errors or defects in cabling;
(II)
(III)
(IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
has been damaged or impaired as a result of using third party firmware;
(V)
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed. Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYERS EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyers selection of products (including the Products) for buyers application and/or failure of products (including the Products) to meet government or regulatory requirements. Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This radio transmitter (FCC: SWX-USGXG) has been approved by FCC. ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-USGXG) has been approved by ISED Canada. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. 2. lappareil ne doit pas produire de brouillage;
lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (IC : 6545A-USGXG) a t approuv par ISDE Canada. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter, except as listed for this products certification. Les antennes utilises pour cet metteur doit tre install pour fournir une distance de sparation dau moins 20 cm de toutes les personnes et ne doit pas tre situ ou oprant en conjonction avec une autre antenne ou un autre metteur, sauf dans les cas numrs la certification de ce produit. Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Deutsch Die Europische Richtlinie 2012/19/EU verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Espaol La Directiva 2012/19/UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto. Franais La directive europenne 2012/19/UE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Declaration of Conformity
[Bulgarian] UBIQUITI NETWORKS , USG-XG-8 2014/53/.
:
www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa USG-XG-8 u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: www.ubnt.com/compliance etina [Czech] Tmto UBIQUITI NETWORKS prohlauje, e typ rdiovho zazen USG-XG-8 je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: www.ubnt.com/compliance Dansk [Danish] Hermed erklrer UBIQUITI NETWORKS, at radioudstyrstypen USG-XG-8 er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: www.ubnt.com/compliance Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur USG-XG-8 conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
www.ubnt.com/compliance English Hereby, UBIQUITI NETWORKS declares that the radio equipment type USG-XG-8 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance Eesti keel [Estonian] Kesolevaga deklareerib UBIQUITI NETWORKS, et kesolev raadioseadme tp USG-XG-8 vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: www.ubnt.com/compliance Suomi [Finnish] UBIQUITI NETWORKS vakuuttaa, ett radiolaitetyyppi USG-XG-8 on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/compliance Franais [French] Le soussign, UBIQUITI NETWORKS, dclare que lquipement radiolectrique du type USG-XG-8 est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante: www.ubnt.com/compliance Deutsch [German] Hiermit erklrt UBIQUITI NETWORKS, dass der Funkanlagentyp USG-XG-8 der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: www.ubnt.com/compliance
[Greek] / UBIQUITI NETWORKS, USG-XG-8 2014/53/.
: www.ubnt.com/compliance Magyar [Hungarian] UBIQUITI NETWORKS igazolja, hogy a USG-XG-8 tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: www.ubnt.com/compliance slenska [Icelandic] Hr me lsir UBIQUITI NETWORKS yfir v a USG-XG-8 er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Fullur texti ESB samrmisyfirlsing er a finna eftirfarandi netfangi: www.ubnt.com/compliance Italiano [Italian] Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio USG-XG-8 conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet: www.ubnt.com/compliance Latvi kalba [Latvian] Ar o UBIQUITI NETWORKS deklar, ka radioiekrta USG-XG-8 atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn:
www.ubnt.com/compliance Lietuvi kalba [Lithuanian] A, UBIQUITI NETWORKS, patvirtinu, kad radijo rengini tipas USG-XG-8 atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas iuo interneto adresu: www.ubnt.com/compliance Malti [Maltese] Bdan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta tagmir tar-radju USG-XG-8 huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformit tista tii kkonsultata minn www.ubnt.com/compliance Norsk [Norwegian] UBIQUITI NETWORKS erklrer herved at utstyret USG-XG-8 er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklringen er tilgjengelig p flgende internettadresse:
www.ubnt.com/compliance Polski [Polish] UBIQUITI NETWORKS niniejszym owiadcza, e typ urzdzenia radiowego USG-XG-8 jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.ubnt.com/compliance Portugus [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rdio USG-XG-8 est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet:
www.ubnt.com/compliance Romn [Romanian] Prin prezenta, UBIQUITI NETWORKS declar c tipul de echipamente radio USG-XG-8 este n conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: www.ubnt.com/compliance Slovenina [Slovak] UBIQUITI NETWORKS tmto vyhlasuje, e rdiov zariadenie typu USG-XG-8 je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: www.ubnt.com/compliance Slovenina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme USG-XG-8 skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance Espaol [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioelctrico USG-XG-8 es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente:
www.ubnt.com/compliance Svenska [Swedish] Hrmed frskrar UBIQUITI NETWORKS att denna typ av radioutrustning USG-XG-8 verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: www.ubnt.com/compliance Online Resources Website www.ubnt.com Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA 2016-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCable, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. AI091817
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-10-06 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-10-06
|
||||
1 | Applicant's complete, legal business name |
Ubiquiti Inc.
|
||||
1 | FCC Registration Number (FRN) |
0012268215
|
||||
1 | Physical Address |
685 Third Avenue
|
||||
1 |
685 Third Avenue, 27th Floor
|
|||||
1 |
New York, NY
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
SWX
|
||||
1 | Equipment Product Code |
USGXG
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** F******
|
||||
1 | Title |
Compliance Manager
|
||||
1 | Telephone Number |
408-9********
|
||||
1 | Fax Number |
408-9********
|
||||
1 |
c******@ubnt.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/04/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UniFi Security Gateway | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON International Inc.
|
||||
1 | Name |
A**** C********
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC