FCC ID: 2BB73IPM IPM+ remote control

d i g i t a l RFPUSH Operation Manual

(2) What is in the box 1 -IPM+

1 - RF Remote Control 1 - 1 Foot Black Control Cable

(6) Connections The IPM+ can connect to the I/O port of any of our interactive players (VP71, VP71XD, VP71XD 4K (1), VP90, HD2700D and HD2700M). The included remote has been pre programmed and linked to the IPM+. Each button represents a track number. Press-

ing button 1 (2) will play the video or photo that begins with 001 (3). Button 3 will play video 003. When loading files on your SD or USB (4) make sure you have a looping Standby video that starts with 000. This can be a black video, logo or some type of attract screen.

(4)

(3) Simply connect the IPM+ to the I/O port (5) of your interactive player using the included cable. Next, connect the player to your TV, insert your SD / USB and power on the player. Note: The IPM+ has a 5VDC jack but is only required when connecting a harness with LEDs requiring more then 1 AMP of current. The player can be set to interactive Instant and Delayed... Instant is recommended for the IPM+. Instant mode will trigger a different video even if the first video has not finished playing. For example: If button 2 is pressed, video 002. mov will begin playing. If button 3 is pressed, then video 002.mov will stop and video 003.mov will instantly play. Delayed mode will ignore any additional button triggers until the 1st video is finished playing. For example: If button 2 is pressed, video 002.mov will begin playing, play once and then loop the 000.mov video again. If button 3 is pressed during video 002.mov, the request will be ignored To reprogram the IPM+, simply press and hold the RF LINK Program button (6) on the side of the IPM+. Once the 001 LED flashes you can release the button. The 1st button you press on the remote will be as-

signed to video 001. The 001 LED will then stop flashing and 002 will flash. Once you have programmed all of the buttons you plan to use

(do not program the buttons not assigned to a video) then press and hold the RF LINK Program button again until the LED stops flashing. You can use multiple remotes on the same IPM+. Lets say you want 2 re-

motes to both trigger videos 001 to 004. You would duplicate your 001, 002, 003 and 004 on your computer and rename them 005, 006, 007 and 008. Then load all 9 videos (000-008) on the SD/USB. Use the above programming instructions but after you program the 1st 4 buttons of the 1st remote, program the first 4 buttons of the second remote. Even though remote #2 will trigger video 005 when button 1 is pressed... you will still get the same video, since 001 and 005 are the same videos.

(5)

(1) d i g i t a l 681 Anita Street Suite 104 - Chula Vista, CA 91911

(800) 878-4056 - (619) 670-4412 www.videoteldigital.com - sales@videoteldigital.com FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Test Report Number: BTF230725R02101 LABEL AND LOCATION IPM+RF FCC ID: 2BB73IPM Label location Total or partial reproduction of this document without permission of the Laboratory is not allowed. BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Page 1 of 1

Videotel Digital Inc. 681 Anita Street Suite #104, Chula Vista, CA 91911 USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-24 To whom it may concern:

We, Videotel Digital Inc., hereby certify that the equipment for which authorization is sought (FCC ID:

2BB73IPM) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered

(https://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the appli under 2.914(b) and (4)(5) and (6). ion requirements listed The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Whee Signature Mark Schneider Founder and CEO Videotel Digital Inc.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-7-24>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2BB731PM IPM+ RF For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos, Block Diagram Schematics Test Setup Photos User's Manual Parts List Tune Up OOOO RRoO) Operational Descriptions. Dopooo8o5) The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Mark Schneider/ Founder and CEO Videotel Digital Inc. 681 Anita Street Suite #104, Chula Vista, CA 91911 USA

(619) 670-4412

(619) 670-4415 mark@videoteldigital.com

Videotel Digital Ine. 681 Anita Street Suite #104, Chula Vista, CA 91911 USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-24 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applicatic is for equipment authorization FCC ID: 2BB73IPM including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely, Name/Title: Mark Schneider/ Founder and CEO Company: Videotel Digital Inc. Address: 681 Anita Street Suite #104, Chula Vista, CA 91911 USA Phone: (619) 670-4412 Fax: (619) 670-4415 E-Mail: mark@videoteldigital.com

Videotel Digital Inc. 681 Anita Street Suite #104, Chula Vista, CA 91911 USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-24 US. Agent Design:

\Videote! Digital Inc. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BB731PM):

Name and company of U.S. agent: Videotel Digital inc. Physical U.S. address of agent 681 Anita Street Suite #104, Chula Vista, CA 91911 USA FRN of US. agent: 0034047332 Email address of U.S. agent: mark@videoteldigital com acknowledges their obligation to accept service of process on behalf of Videotel Digital Inc... Videotel Digital Inc. with the FRN [0034047332] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation ofthe applicable equipment within the U.S. or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is late. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(4)(). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 Dot An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, GLE jibe

- a GEL la Signature Signature Mark Schneider Mark Schneider Founder and CEO Founder and CEO Videotel Digital Inc. Videotel Digital Inc.