all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 2.74 MiB | ||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | RF Exposure Info |
1 2 3 4 | User Manual | Users Manual | 2.74 MiB |
Users manual TL86103 DECT 6.0 2-line corded/cordless telephone/
answering system with BLUETOOTH wireless technology BC Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 148-149 of this manual. Please thoroughly read this users manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. This telephone system is compatible with certain AT&T DECT 6.0 cordless headsets. Visit www.telephones.att.com/headsets for a list of compatible cordless headsets. Model number: TL86103 Type: DECT 6.0 2-line corded/cordless telephone/
answering system with BLUETOOTH wireless technology Serial number: _____________________________________________________________ Purchase date: ____________________________________________________________ Place of purchase: _________________________________________________________ Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. Compatible with Hearing Aid T-Coil T TIA-1083 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. The ENERGY STAR program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR label indicating it meets the latest energy efficiency guidelines. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Users manual TL86103 DECT 6.0 2-line corded/cordless telephone/
answering system with BLUETOOTH wireless technology Quick start guide TL86103 This quick start guide provides you with basic instructions only. For more complete instructions, refer to the Abridged users manual provided in the package, or see the online users manual at www.telephones.att.com/manuals. Parts checklist Handset Charger with power adapter Corded handset Telephone base Telephone line cord Telephone base power adapter Battery compartment cover 2 Batteries Wall mount bracket Abridged users manual Quick start guide Your package contains:
Basic steps to set up & operate your phone Users manual Quick start guide Cordless handset Telephone base Corded handset with coiled handset cord attached Charger for cordless handset with power adapter installed Belt clip for cordless handset Battery for cordless handset Battery compartment cover Power adapter for telephone base TL86103 Telephone line cords
(one black and one clear) CD-ROM USB cable Users manual TL86103 DECT 6.0 2-line corded/cordless telephone/
answering system with BLUETOOTH wireless technology Table of contents Getting started Installation ..................................................... 1 Quick reference guide - handset ........ 2 Quick reference guide -
telephone base ............................................ 5 Telephone base and charger installation ..................................................... 9 Telephone base installation ............ 9 Charger installation ...........................10 Connect your telephone base to PC ...............................................................11 Installation of AT&T Unified Call Manager on PC ...................................11 Audio Settings ......................................12 Battery installation and charging .....13 Installation options ..................................14 Tabletop to wall mount installation .............................................14 Wall mount to tabletop installation .............................................15 Belt clip & optional handset ...............16 Bluetooth Introducing Bluetooth ............................17 Connect to Cell application ........19 Glossary of terms .....................................20 Bluetooth setup ........................................21 Add a cell phone ................................21 Add a headset ......................................23 Auto connection ..................................25 Bluetooth connection from idle mode .........................................................25 Device list and connection ............25 Review the device list ......................25 Connect/disconnect an active device .........................................26 Remove a paired device ..................26 Replace an active device ................27 Download directory ...........................28 Interruption to directory download ................................................30 View the directory download information ............................................30 Change PIN ............................................31 Cell ringer ...............................................31 Telephone settings Handset and telephone base settings ..........................................................32 Ringer volume ......................................33 Ringer tone ............................................34 LCD language .......................................35 Set date/time .......................................36 Caller ID announce ............................38 Set speed dial voicemail number.....................................................39 Voicemail (visual message waiting) number.....................................................41 Clear voicemail indication ..............41 Key tone ..................................................42 Use caller ID to automatically set date and time .......................................42 Home area code ..................................43 Cell area code ......................................45 Dial mode ...............................................47 Line preference ....................................47 QUIET mode ..........................................48 Web address .........................................48 No line alert ..........................................49 Cell alert ................................................49 Telephone operation Telephone operation...............................50 Make, answer or end a line 1 or line 2 call ................................................50 Call waiting on line 1 or line 2 ....52 Make, answer or end a cell call .............................................................53 Call waiting on the cell line ..........54 Answer an incoming cell call while on line 1 or line 2 .................55 Answer an incoming call on line 1 or line 2 while on a cell call ....................................................56 Make, answer or end a softphone call ......................................57 Voice command ...................................58 Conference calls .......................................59 Conference calls on line 1 and line 2 .........................................................59 Conference calls on line 1 or line 2 with cell calls ..........................60 Options while on calls ...........................62 Silencing the ringer ...........................62 Page all devices ..................................62 Speakerphone ......................................63 Join a call in progress ......................63 Volume control ....................................64 Mute ..........................................................64 Temporary tone dialing ...................65 Hold ...........................................................65 Equalizer ..................................................66 Chain dialing .........................................67 Redial..............................................................69 Review the redial list ........................69 Dial a redial entry ...............................69 Save a redial entry to the directory ..................................................71 Delete a redial entry from the directory ..................................................72 Intercom ........................................................73 Answer an incoming call during an intercom call .........................................75 Call transfer using intercom ...............76 Push-to-talk (PTT) ....................................78 Turn PTT on or off ..............................78 PTT call to a single device .............79 PTT call to multiple devices ..........81 Answer a PTT call ...............................82 Change a one-to-one PTT call to an intercom call ..................................83 Answer an incoming call during a PTT call ....................................................83 Make an outgoing call during PTT call .............................................................84 End or leave a PTT call ....................84 Directory About the directory .................................85 Create directory entries ........................86 Create a new entry in the home directory ..................................................86 Dialing keys ...........................................88 Add a predialed telephone number to the directory....................................89 Review the directory ...............................90 Review directory entries .................90 Review the directory ...............................91 Search the directory ...............................92 3-character alphabetical search .92 Dial, edit or delete a directory entry................................................................93 Dial a directory entry ........................93 Edit a directory entry ........................93 Edit the type of a directory entry ..........................................................95 Delete a directory entry ..................95 Remove a downloaded directory ..................................................96 Caller ID About caller ID ..........................................97 Information about caller ID with call waiting ............................................97 Caller ID log ................................................98 How the caller ID log works .........98 Missed (new) call indicator ............98 Memory match .....................................98 Caller ID operation ..................................99 Review the caller ID log ..................99 View dialing options .......................100 Dial a caller ID log entry .............100 Save a caller ID log entry to the Telephone base alert tones ........129 Lights .....................................................130 Display screen messages ..................131 Screen messages .............................131 Troubleshooting .....................................135 Important safety information ..........148 Safety information ...........................148 Especially about cordless telephones ..........................................149 Precautions for users of implanted cardiac pacemakers ........................................149 ECO mode ...........................................149 Especially about telephone answering systems ..........................149 Energy-saving charging mode ........150 FCC Part 68 and ACTA........................151 FCC Part 15 ..............................................152 Limited warranty ....................................153 Technical specifications .....................155 DECT 6.0 digital technology .......155 Telephone operating range ........155 Redefining long range coverage and clarity ...........................................155 HD audio ..............................................155 Simulated full duplex handset speakerphone ....................................155 Index Index ............................................................156 Remote access wallet card ..............158 directory ...............................................101 Delete caller ID log entries ........103 Reasons for missing caller ID information ...............................................104 Answering system Answering system settings ...............105 Announcement .................................105 Answer on/off ...................................108 Call screening ....................................109 Number of rings ...............................110 Remote access code ......................111 Message alert tone .........................112 Message recording time ...............113 About the answering system...........114 Answering system and voicemail indicators .............................................114 Using the answering system and voicemail together ..........................114 Message capacity ............................115 Voice prompts ...................................115 Temporarily turning off the message alert tone .........................115 Call screening ......................................116 Call intercept .....................................116 Message playback .................................117 Options during playback ..............118 Delete all old messages ...............120 Recording and playing memos .......121 Record a memo ................................121 Playback a memo ............................121 Remote access ........................................122 To remotely access the answering system ...................................................122 Appendix Adding and registering cordless handsets/headsets/wireless speakers .....................................................124 Register a cordless handset to your telephone base ......................124 Deregister cordless handsets ..........125 Deregister all cordless handsets from the telephone base .............125 Alert tones and lights .........................126 Handset screen icons ....................126 Telephone base screen icons ....127 Handset alert tones ........................128 Getting started Installation You must install and charge the battery before using the telephone. STOP!
See page 13 for easy instructions. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 14-15). For optimum range and better reception, place the telephone base in a central and open location. You may hear interference if your cellular phone is too close to the telephone base during a CELLULAR call. Make sure that your Bluetooth enabled cellular phone is within 15 feet of the telephone base in order to maintain a clear and consistent connection between your Bluetooth cell phone, telephone base and cell tower. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 9-10). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (866) 288-4268. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or workbench. 1 Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the charger. Softkeys (2) Press to select the menu item displayed above the key (page 4) While in a menu, press to select an item or save an entry or setting. A Cell/
B Cell Press to make or answer a cell call (page 53). During a call, press to answer an incoming Cell A/B call when you hear a call waiting alert (page 54). HOLD During a call, press to put the current call on hold (page 65). LINE 1/FLASH/LINE 2/FLASH Press LINE 1/FLASH to make or answer a call on line 1 (page 50) During a call, press to answer an incoming line 1 call when you hear a call waiting alert (page 46). Press LINE 2/FLASH to make or answer a call on line 2 (page 50) During a call, press to answer an incoming line 2 call when you hear a call waiting alert (page 46). 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 100). Press and hold to set (page 39) or dial your voicemail number. TONE /a>A Press to switch to tone dialing temporarily during a call if you have pulse service (page 65). Press to switch between upper case and lower case while entering characters.
/SPEAKER Press to make a call on line 1 or line 2 using the handset speakerphone (page 50). Press to answer a call on line 1 or line 2 or a cell call using the handset speakerphone (pages 50, or 53). Press to turn on the handset speakerphone. Press again to resume normal handset use (page 58). REDIAL/PAUSE Press to view the last 10 numbers dialed (page 61). While entering numbers, press and hold to insert a dialing pause
(page 86). 2 Getting started Quick reference guide - handset DIR/VOLUME Press to scroll up while in menus (page 90). Press to show directory entries when the telephone is not in use. While entering names or numbers in the directory, press to move the cursor to the right. Press to increase the listening volume when on a call
(page 64), or to increase the message playback volume
(page 118). CID/VOLUME Press to scroll down while in menus. (page 90). Press to show the caller ID history when the telephone is not in use. While entering names or numbers in the directory, press to move the cursor to the left. Press to decrease the listening volume when on a call
(page 64), or to decrease the message playback volume
(page 118). OFF/CANCEL While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display, or press and hold this button to return to idle mode. During a call, press to hang up (pages 50). When the handset is ringing , press to mute the ringer temporarily (page 64). Press and hold while the telephone is not in use to erase the missed call indicator. QUIET # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 100). Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 48). Press to toggle the name order when saving a caller ID log entry into directory. MUTE/DELETE During a call, press to mute the microphone (page 64). While the telephone base is ringing, press to silence the ringer temporarily (page 64). While predialing, press to delete digits. While reviewing the redial list, directory or caller ID history, press to delete an individual entry. While entering or editing a directory entry, press to erase a digit or character, or press and hold to erase all digits or characters. 3 Getting started Quick reference guide - handset Handset side view PUSH TO TALK Press to initiate a one-to-one (page 79). Press and hold to broadcast to a group of system devices (page 73). Main menu The selected menu item is highlighted. Menu Feature menu Play messages (page 117) Directory (page 85) Caller ID log (page 97) Intercom (page 73) Ringers (page 33) Set date/time (page 36) Settings (page 32) Web address (page 48) Voice command (page 58) Using menus:
Press MENU to show the menu. Press CID or DIR to scroll through menu items. Press SELECT to confirm or save changes to a highlighted menu item. Press OFF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. 4 Getting started Quick reference guide - telephone base HOLD 1 During a call, press to put the current call on hold (page 65).
/VOLUME/
Press to adjust the volume during message playback
(page 64). Press to adjust the listening volume during a call (page 118). When the phone is not in use, press to adjust the telephone base ringer volume for all lines. FLASH During a call, press to answer an incoming call when you receive a call waiting alert (page 46). PTT Press to display the PTT menu to begin a PTT call (page 79). Press and hold to begin a one-to-group broadcast when the phone is not in use
(page 73). While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory
(page 100). Press and hold to set or dial your voicemail number (page 39). QUIET # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry. Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode
(page 48). TONE /a>A Press to switch to tone dialing temporarily during a call if you have pulse service. Switch between upper case and lower case while entering characters. 5 Getting started Quick reference guide - telephone base DIR Press to scroll up while in a menu. Press to show directory entries when the telephone is not in use. While entering names or numbers, press to move the cursor to the right. REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed (page 61). While entering numbers, press and hold to insert a dialing pause. CELL A light On when the telephone base is paired and connected with a Bluetooth cell phone on Cell A line
(page 20). Flash alternately while pairing a Bluetooth device. CELL B/HEADSET light On when the telephone base is paired and connected with a Bluetooth device on Cell B line
(page 20). Flash alternately while pairing a Bluetooth device. 1 LINE/2 LINE Press to make or answer a call on line 1 or line 2 (page 50). During a call, press to answer an incoming line 1 or line 2 call when you hear a call waiting alert. (page 46). CID Press to scroll down while in a menu. Press to review the caller ID log when the telephone is not in use. While entering names or numbers, press to move the cursor to the left. CANCEL While in a menu, press to exit without making changes or press and hold to return to idle mode. Press and hold while the telephone is not in use to erase the displayed messages (XX Missed calls, page 98). Softkeys (2) Press to select the menu item displayed above the key. SPEAKER Press to make a call on line 1 or line 2 using the speakerphone (page 50). Press to answer a call on line 1 or line 2 or a cell call using the handset speakerphone. Press to switch between the speakerphone and corded handset. CELL A /CELL B Press to make or answer a cell call
(page 53). During a cell call, press to answer an incoming call when you hear a call waiting alert (page 54). Flashes quickly when there is an incoming cell call. Flashes slowly when a cell call is on hold. 6 Getting started Quick reference guide - telephone base
/SKIP During message playback, press to skip to the next message
(page 118). Press to show the remaining digits on the left.
/RECORD Press to record an announcement or a memo
(page 121).
/LINE 1 MAILBOX
/LINE 2 MAILBOX Press to play line 1 or line 2 messages (page 117). Press to stop playing line 1 or line 2 messages
(page 118).
/DELETE Press to delete the message currently playing (page 118). When the phone is not in use, press twice to delete all previously reviewed messages (page 120). While entering names or numbers, press to delete a digit or a character. While reviewing the redial list, directory or caller ID history, press to delete an individual entry. While predialing, press to delete a digit.
/REPEAT Press to repeat a message
(page 118). Press twice to play the previous message. Press to show the remaining digits on the left.
/LINE 1 ANS ON/OFF
/LINE 2 ANS ON/OFF Press to turn the answering systems of line 1 or line 2 on or off (page 108). Small USB port A standard size USB port in the telephone base is used for connection to PC. USB ports Two standard size USB ports in the telephone base are used for charging your cell phones. 7 Getting started Quick reference guide - telephone base Main menu The selected menu item is highlighted. Menu Feature menu Answering system (page 105) Directory (page 85) Caller ID log (page 97) Intercom (page 73)p Page all devices (page 62) Bluebooth (page 17) Ringers (page 33) Set date/time (page 36) Caller ID Annc (page 38) Settings (page 32) Web address (page 48) Voice command (page 58) Using menus:
Press MENU in idle mode to show the main menu. Press CID, DIR, /RECORD or /DELETE to scroll through menu items. Press SELECT to confirm or save changes to a highlighted menu item. Press CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. 8 Getting started Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 14 for details. Telephone base installation 1. Rotate the wall mount bracket down and push it into the telephone base until it clicks into place. Plug the end of the corded handset cord into the telephone jack at the back of the telephone base. Plug the small end of the telephone base power adapter into the power line jack at the back of the telephone base and route the cord through the slot. 2. Rotate the wall mount bracket up and push it into the telephone base until it clicks into place. 1 2 3. Plug the telephone line(s) according to the instructions below. Option 1: If you have separate wall jacks for each line, plug the telephone lines as shown below. Line 2 telephone wall jack Line 1 telephone wall jack Plug the other ends of the telephone line cords into the telephone wall jack, or into DSL filters if you have DSL high-speed Internet service. Raise the antenna. Route the cords through the slots. Plug one end of the black telephone line cord into the LINE 1/L1+L2 telephone jack at the bottom of the telephone base. Plug one end of the clear telephone line cord into the LINE 2 telephone jack at the bottom of the telephone base. 9 Getting started Telephone base and charger installation Option 2: If you have a 2-line wall jack, plug the 4-conductor telephone line as shown below. Plug the other end of the black telephone line cord into the telephone wall jack, or into a DSL filter if you have DSL high-speed Internet service. Raise the antenna. Line 1 + line 2 telephone wall jack Route the cord through the slot. Plug one end of the black telephone line cord into the LINE 1/L1+L2 telephone jack at the bottom of the telephone base. Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION:
Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet. 10 Getting started Connect your telephone base to PC Your new AT&T TL86103 allows you receive or make softphone calls by connecting the telephone base to your computer using the USB cable. You can make and answer Voice over IP (VoIP) calls through SkypeTM or Microsoft Lync, landline calls or cell calls using the AT&T Unified Call Manager.You can also use the voice command feature to make calls (see page 52) after you have installed the AT&T Unified Call Manager. To connect the telephone base to your computer:
Plug the USB cable into your computer as shown below. Wait for your computer to indicate that it has recognized the telephone base. Plug the large end of the USB cable into a USB port on your computer. Plug the small end of the USB cable into the small port on the right side of the telephone base. Installation of AT&T Unified Call Manager on PC To install AT&T Unified Call Manager:
Put the CD-ROM that comes with the package into your computer. Open My computer, and then double click to open the disk drive. Double click the installation file to begin the InstallShield Wizard. 1. If any security warning window pops up, click the appropriate button to authorize the installation of the software. Click Run. Choose your desired setup language, Click Next> to proceed to installation preparation. After that, a welcome screen appears. Click Next>. Read the license agreement, and then accept the terms by pressing the upper checkbox. Press Next> to continue. The default installation path is C:\Program.files\AT&T\AT&T Softphone Call Manager. Click the Browse... button to change the path if necessary. Click Next>. Click Install to begin installation. When the installation is done, press Finish to exit the installation program. If you want to launch the AT&T Softphone Call Manager after installation, tick the option checkbox before pressing Finish. 2. 3. 4. 5. 6. SkypeTM is a trademark of Skype. Microsoft Lync is a registered trademark of Microsoft Corporation 11 Getting started Connecting your telephone base to PC Audio Settings After you have installed the AT&T Unified Call Manager, check to make sure the audio setting is properly configured in your Windows system. If you have installed Skype or Microsoft Lync and want to use them with your telephone base, make sure the audio settings are configured correctly in the programs as well. a) Audio settings in Microsoft Windows system:
For Windows XP users:
i. ii. Click Start menu and choose Control Panel. Click Sounds, Speech, and Audio Devices and then click Sounds and Audio Devices. Click the Audio tab. Make sure AT&T DECT 6.0 Telephone is selected under the Sound playback and Sound recording settings. For Windows 7 users:
i. ii. Click Start menu and choose Control Panel. Click Hardware and Sound and then click Manage audio devices under the Sound menu. Click the Playback tab and make sure AT&T DECT 6.0 Telephone is set as the default speaker. Click the Recording tab and make sure AT&T DECT 6.0 Telephone is set as the default microphone. iii. iv. iii. iv. b) Audio settings in Skype:
i. ii. iii. iv. Launch the Skype program. Click on Tools, and then Options. Click on Audio settings. Make sure AT&T DECT 6.0 Telephone is selected under the speakers and microphone settings. c) Audio settings in Microsoft Lync:
i. ii. iii. Launch the Microsoft Lync program. Click on Options, and then Audio device. Make sure AT&T DECT 6.0 Telephone is selected under the Audio device setting. IMPORTANT Periodically check for software updates. Go to the ABOUT tab under the Settings panel in the AT&T Unified Call Manager, and then click CHECK UPDATED. For more details, refer to the Software updates section in the Installation and Operation Guide, available in the CD-ROM which comes with the package. Windows and Windows XP are registered trademarks of Microsoft Corporation. 12 Getting started Battery installation and charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). For best performance, keep the cordless handset in charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table in the Technical specifications section on page 155 for battery operating times. Battery indicators Battery status Action The screen is blank or shows Place in charger and flashes. The battery has no or very little charge. The handset cannot be used. Charge without interruption (at least 30 minutes). The screen shows Low battery and flashes. The screen shows HANDSET X. Battery has enough charge to be used for a short time. Battery is charged. Charge without interruption (at least 30 minutes). To keep the battery charged, place it in charger when not in use. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2 Align the cover flat against the battery compartment, and then slide it upwards until it clicks into place. CHARGE light Step 3 Charge the cordless handset by placing it face forward in the charger. The CHARGE light on the top of the handset is on during charging. IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT184342/
BT284342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage. 13 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow the steps below to connect the telephone base with a standard dual-stud telephone wall mounting plate. You may need a professional to install the wall mounting plate. Tabletop to wall mount installation 1. 2. 3. 4. 5. 6. 1 4 Unplug the power adapter from the power outlet. Unplug the telephone line cord from the wall jack (or DSL filter). Put the handset aside. Hold down the switch hook on the telephone base, and then slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees. Then replace the handset tab into the slot until it locks into position. Press down on the tabs of the wall mount bracket as indicated to release it from tabletop orientation. Rotate the wall mount bracket down and push it into the telephone base until it clicks into place. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. Align the slots on the back of the telephone base with the studs of the wall mounting plate. Slide the telephone base down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties. 3 6 2 5 14 Getting started Installation options Wall mount to tabletop installation To change the telephone base from the wall mount position to tabletop position, follow the steps below. 1. Unplug the power adapter from the power outlet. Unplug the telephone line cord from the wall jack (or DSL filter). If the telephone line cord and power adapter cord are bundled, untie them first. Push the telephone base up to remove it from wall. Put the handset aside. Hold down the switch hook on the telephone base, and then slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees. Then replace the handset tab into the slot until it locks into position. Gently pull upward to release the wall mount bracket. Rotate the wall mount bracket up to tabletop position and push it into the telephone base until it clicks into place. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. Bundle the telephone line cord and power adapter cord neatly with twist ties if necessary. 2. 3. 4. 1 3 2 4 15 Getting started Belt clip & optional handset To attach the belt clip:
Snap the belt clip into the slots on both sides of the handset as shown in the figure. To remove the belt clip:
Gently lift either of the belt clip tabs, shown in the figure, outwards to remove the belt clip from the handset. For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1
(866) 288-4268. Lift the plastic cover here. Plug a 2.5 mm headset (not included) into the jack on the side of handset (beneath the small plastic cover). Side the handset 16 Bluetooth Introducing Bluetooth Your new AT&T TL86103 telephone system with Bluetooth wireless technology has the following features:
Pair up to 4 Bluetooth enabled devices (cell phones or headsets) with the telephone base. Connect a maximum of 2 cell phones to make and receive cell calls. Both cell phones can be active on a call at a time. Connect a Bluetooth enabled headset for making and receiving calls on line 1 or line 2. Conference any combination of cell and line 1 or line 2 calls. Make and receive calls using your cell phone service with your telephone base or system handsets. Download phonebook entries from your cell phone. Ringtone share feature allows you to set your telephone to play your iPhone (iOS 4.1 or later) ringtone. IMPORTANT INFORMATION After plugging in the telephone base, wait at least 20 seconds before connecting a Bluetooth device. The screen shows Bluetooth system busy if you try to connect too soon. Refer to the users manual of your Bluetooth enabled cell phone or headset for more information about how that device uses Bluetooth connectivity. Bluetooth wireless technology operates within a short range (up to 30 feet) from the telephone base. Keep connected cell phones and headsets within this range. If your cell phone has poor reception in your home, the TL86103 cannot improve the reception. However, if there is a location in your house with better reception, you can leave your cell phone at that location while you use the TL86103 cell line. For optimal performance, the cell phone must be within 15 feet of the telephone base. iPhone is a registered trademark of Apple. Inc. 17 Bluetooth Introducing Bluetooth If you experience poor sound quality, it may be caused by the distance between your cell phone and the telephone base. To improve the performance, place your cell phone closer to the telephone base (within 15 feet) and make sure that there are no physical obstacles such as large furniture or thick wall in between. 15 feet DECT 6.0 Cellular signal Charge your cell phone while it is connected to the telephone base. Your cell phones battery discharges faster while it is connected to the telephone base via Bluetooth wireless technology. Monitor your cell phones usage because minutes may be deducted from your cellular plan for the duration of all cell calls, depending on the terms of your plan. Refer to the Bluetooth setup section (pages 21-31) to learn how to set up your Bluetooth device. Refer to the Telephone operation section (pages page 50-58) on how to operate your Bluetooth devices with your new AT&T TL86103 telephone system with Bluetooth wireless technology. Refer to the Troubleshooting section (pages page 135-147) if you experience difficulty when using the telephone system. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 18 Bluetooth Introducing Bluetooth Connect to Cell application If you are using Bluetooth-enabled cell phones with Android OS 2.3 or above, you can further extend the flexibility of your TL86103 with use of the free Connect to Cell application. Connect to Cell comprises Caller ID manager and Alerts manager that help integrate your cell phone with the AT&T telephone system. Caller ID manager (Caller ID share) allows you:
To view your AT&T phones caller ID log on your Android cell phone;
To use your Android cell phone to call back or send messages to individuals who have called to line 1 or line 2 on the AT&T telephone;
To store callers names and numbers to your Android phones directory for future use. Alerts manager (Mobile notification) allows you to extend your Android phones alerts to your AT&T telephone system. Your AT&T telephone will notify you whenever you receive certain text messages, e-mails or social media updates on your Android phone, so you will always be kept up to date. To use Caller ID manager and Alerts manager, you must first download Connect to Cell to your Android cell phone using the Google Play Store app. Scan the QR code on the right to download the application. Connect to cellTM is a trademark of Advanced American Telephones. Android and Google Play are registered trademarks of Google Inc. 19 Bluetooth Glossary of terms Below are some terms used in this users manual to help you become familiar with using your Bluetooth devices and your new AT&T telephone system. Active devices the Device list has two active slots for two cell phones, or one cell phone and one headset. When a device in the list is active it will have a A:
or B: in front of the device name. In order to use a Bluetooth device on a call, it must be in an active slot and be connected. Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone. CELL line - the telephone line associated with your cell phone service. On your TL86103, press A Cell or B Cell on a handset, or Cell A or Cell B on the telephone base to use the cell line. and/or Connected - when you pair a Bluetooth device to the TL86103 it is placed in an active slot and automatically connected. When a device is connected, a A base, and the CELL A and/or CELL B/HEADSET will be on. If a device loses its connection to the telephone base, it must be reconnected before you can use the device with the telephone system. B will display on screens of the handset and the telephone light on the telephone base Device list - The list of devices connected to the telephone.
Disconnected - when a device is disconnected, A screens of handsets and the telephone base, and the CELL A and/or CELL B/HEADSET light on the telephone base is off. and/or
B displays on the Discoverable mode - before a Bluetooth enabled device can be paired, it must be set to this mode. When pairing your cell phone, the telephone base is set to this mode. Depending on the cell phone manufacturer, this mode is sometimes referred to as Find Me or Visibility. LINE 1 and LINE 2 - your conventional telephone land lines. On your TL86103, press LINE 1/FLASH or LINE 2/FLASH on a handset or 1 LINE or 2 LINE on the base to use the corresponding line. Paired devices - The Bluetooth enabled devices (cell phones or headsets) that have shared registration information with the telephone base. A total of four Bluetooth enabled devices can be paired to the telephone base. However, only two paired devices can communicate with the base at a time. Pairing - sometimes referred to as bonding. The process of sharing registration information between two Bluetooth enabled devices. Your Bluetooth enabled cell phone or headset must first be paired to the telephone base in order to use it with this telephone system. PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN information may be exchanged between Bluetooth devices before they can be used. This is also known as a Passkey or Passcode. 20 Bluetooth Bluetooth setup To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. The TL86103 can then be used to make or answer calls on the cell phone line. Bluetooth wireless technology operates within a short range (up to 30 feet). When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, keep the device within 15 feet of the telephone base for optimal performance. Add a cell phone Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth device. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices. To pair and connect a cell phone:
Using the telephone base:
1. 2. 3. 4. Press MENU on the telephone base in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press SELECT to choose Add device. Press SELECT to choose Add cellular. The screen displays Please wait..., followed by 1. If cell is connected to BT device, please disconnect it. If there are already 4 paired devices on the device list, the 4th device on the device list will be automatically removed, regardless of whether the new device pairing is successful or not. If there are already 2 active devices on the device list with prefix A: or B:, the telephone base shows Cell phone A is deactivated for adding a new device. 5. Press NEXT . The screen displays 2. Place cell phone Caller ID log Intercom Page all devices Bluetooth BACK SELECT BLUETOOTH Add device Device list Download dir BACK SELECT ADD DEVICE Add cellular Add headset BACK SELECT Set cell to search base:
AT&T DECT 6.0 discoverable PIN:0000 next to base. All devices that are connected to the telephone base are disconnected until the pairing process is completed. 6. Press NEXT to turn on the telephone base discoverable mode. The screen displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly turn on the Bluetooth feature of your cell phone and search for or add new devices. 21 Bluetooth Bluetooth setup 7. Once your cell phone finds your AT&T phone (AT&T Adding Cell Phone A DECT 6.0), press the appropriate key on your cell phone to continue the pairing process. Your cell phone may require a passcode. In this case, the telephone base displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode (typically 0000) into the telephone base and press SET. Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process if required. The telephone base displays Adding Cell Phone A. Cell Phone A is added and connected to base. 8. When a device is successfully connected, the telephone base displays Cell Phone A is added and connected to base. You hear a confirmation tone. The corresponding status icon (A corresponding device light on the telephone base (CELL A and/or CELL B/HEADSET B) displays. The
) turns on. or If you have trouble pairing your cell phone, it may not be compatible with your TL86103. Check the Bluetooth compatibility list at www.telephones.att.com. NOTES:
The pairing process may take up to one minute. If the pairing process fails, turn off the bluetooth feature on your cell phone and on the TL86103 by pressing A B. Then repeat the steps in the users manual to pair and connect again. In some cases, it may take you a few attempts to complete the pair process. The steps for the pairing process may vary for different cell phones. If this happens, follow the prompts on your cell phone and your TL86103 to complete the pairing process. Refer to the users manual of your cell phone on how to search for or add a new Bluetooth device. or 22 Bluetooth Bluetooth setup Add a headset Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to your headset user's manual to learn how to search for or add new Bluetooth devices. To pair and connect a headset:
Using the telephone base:
1. 2. 3. 4. Press MENU on the telephone base in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press SELECT to choose Add device. Press CID, DIR, /RECORD or /DELETE to highlight Add headset, and then press SELECT. The screen displays If headset is connected to cell, please disconnect it. If there are already 4 paired devices on the device list, the 4th device on the device list will be automatically removed, regardless of whether the new device pairing is successful or not. If there is another headset already active, the screen will show Only BT devices in slot 1 or 2 can be ready for connection and prompts you to replace an existing paired device. If there are already 2 active devices on the device list with prefix A: or B:, the screen shows Only 2 devices can be ready for connection. The screen prompts you too deactivate an active device. Caller ID log Intercom Page all devices Bluetooth BACK SELECT BLUETOOTH Add device Device list Download dir BACK SELECT DEVICE LIST Add cellular Add headset BACK SELECT Pls set headset to discoverable mode BACK NEXT BACK NEXT Searching for Bluetooth headsets... 5. Press NEXT . The screen displays Pls set headset to discoverable mode. Set your headset to discoverable mode (refer to the users manual of your headset), and then press NEXT. All devices that are connected tot the telephone base are temporarily disconnected. 6. The screen displays Searching for Bluetooth headsets... 7. When the screen displays the found devices, press CID, DIR, /RECORD or /DELETE to highlight your FOUND DEVICES Headset A Headset B BACK SELECT Adding Headset A BACK headset if neccessary then press SELECT . Enter the PIN of your headset if required. The PIN for most Bluetooth devices is 0000 (refer to the users manual of your headset), and then press NEXT. 23 Bluetooth Bluetooth setup 8. The screen displays Adding Headset A when the base is connecting to your headset. 9. When a device is successfully connected, the telephone base displays Headset A is added and connected to base and the corresponding status icon (
You hear a confirmation tone. CELL B/HEADSET base turns on. B ) displays. Headset A is added and connected to base. light on the telephone If you have trouble pairing your cell phone or headset, it may not be compatible with your TL86103. Check the Bluetooth compatibility list at www.telephones.att.com/bluetooth. NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again. When a connected headset is charging, it may disconnect from the telephone base and the corresponding light on the telephone base (CELL B/HEADSET models, you may need to turn on the headset and reconnect it to the telephone base again.
) turns off. For some headset 24 Bluetooth Bluetooth setup Auto connection When an active device moves within Bluetooth range of the telephone base, or is turned on within range, the telephone base tries to connect to the device. When the device moves out of range, it is disconnected. Your device might make a connect or disconnect sound. A connected device could also be disconnected by:
Turning off the Bluetooth device. Turning off the Bluetooth feature of the device. Disconnecting through the telephone base Device list. If you disconnect through the Device list, the telephone base will not attempt to reconnect until your device is moved out of range and then moves back in range again. Bluetooth connection from idle mode When you have active devices that are not connected, CONNECT appears on the telephone base in idle mode. Press CONNECT on the telephone base to start connecting an active device. When there are two active devices, the screen will prompt you to choose one before connection Device list and connection Up to 4 devices can be paired to the telephone base. All paired devices are shown on the device list. To use a paired device, it must be in an active slot (A:
or B:) on the device list and connected. Two Bluetooth cell phones can be on a call at a time. While you are on a cell line call, you can also use a Bluetooth headset to make or answer a call on line 1 or line 2. Once you have paired a device with the telephone base, you do not need to repeat the pairing procedure again unless you delete the device from the device list. NOTE: When connecting a Bluetooth device to the device list, all connected devices will be temporarily disconnected until the procedure is complete. It may take up to 2 minutes to reconnect. Review the device list 1. 2. Press MENU on the telephone base in idle mode. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Device list, and then press SELECT . 3. 25 Bluetooth Bluetooth setup Connect/disconnect an active device While in the device list menu, you may connect or disconnect your active device. 1. 2. Press MENU on the telephone base in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Device list, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight a device, and then press OPTION . Press CID, DIR, /RECORD or /DELETE to highlight Connect/
Disconnect (whichever is applicable), and then press SELECT. The telephone base displays Device connected/Device disconnected. You hear a confirmation tone. 3. 4. 5. NOTE: When your active device is connected, you are prompted to select Disconnect. When your active device is disconnected, you are prompted to select Connect. Remove a paired device When you already have a maximum of 4 paired devices on the device list and you want to add another device, you must first delete a device from the device list. BLUETOOTH To remove a paired device:
1. Press MENU on the telephone base in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Device list, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight the desired device, and then press OPTION . Press CID, DIR, /RECORD or /DELETE to highlight Remove, and then press SELECT . 2. 3. 4. 5. 6. The handset displays Remove Cell Phone A? Press YES to confirm. The telephone base displays Device removed from device list and you hear a confirmation tone. 26 Add device Device list Download dir BACK SELECT DEVICE LIST A:Cell Phone A B:Headset A BACK OPTION Cell Phone A Connect Remove BACK SELECT Remove Cell Phone A
NO YES Device removed from device list Bluetooth Bluetooth setup Replace an active device If you already have 2 active devices on the device list and you want to activate a different device, you must deactivate one of the 2 active devices. To replace an active device:
1. 2. BLUETOOTH Add device Device list Download dir BACK SELECT DEVICE LIST A:Cell Phone A B:Headset A Cell Phone B BACK OPTION Only BT devices in slot 1 or 2 can be ready for connection DEACTIVATE A:Cell Phone A B:Headset A BACK NEXT Connecting Cell Phone B to the base... DEVICE LIST A:Cell Phone B B:Headset A Cell Phone A BACK OPTION 3. 4. 5. 6. 7. Press MENU on the telephone base in idle mode. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Device list, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight the device you want to activate without a prefix A: or B:
then press OPTION . Press CID, DIR, /RECORD or /DELETE to highlight Connect, and then press SELECT . The handset displays Only BT devices in slot 1 or 2 can be ready for connection and then a list of devices for deactivation. Press CID, DIR, /RECORD or /DELETE to highlight the device to be deactivated, and then press NEXT . The screen displays Cell Phone A is deactivated and you hear a confirmation tone. The screen then displays Connecting Cell Phone B to the base... Depending on your cell phone settings, you may need to press a key on your cell phone to confirm the connection. When the new device is successfully activated and connected, the handset displays Device connected. You hear a confirmation tone. NOTE: When adding removing, or replacing a Bluetooth device on the active devices list, all connected devices are temporarily disconnected until the procedure is complete. It may take up to 2 minutes to reconnect. 27 Bluetooth Bluetooth setup Download directory You can download up to 4 cell phone directories (phonebooks) to your TL86103 telephone system via Bluetooth wireless technology. Each downloaded directory can store up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name. Before downloading a directory, make sure the cell phone is paired, active, and connected to your TL86103 telephone system. Place your cell phone next to the telephone base when you download a cell phone directory to your TL86103 telephone system. To download a cell phone directory:
Using the telephone base:
1. 2. 3. 4. Press MENU on the telephone base in idle mode. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Download dir, and then press SELECT . If there is no cell phone paired to the system, the telephone base displays Device list is empty. Press OK to return to the Bluetooth menu. If there are two active devices on the device list, press CID, DIR, RECORD or DELETE to highlight the desired device, and then press SELECT . If the selected device is active but disconnected, the telephone base displays Cellular phone not connected. Press CONNECT. Press CID, DIR, RECORD or DELETE to highlight one of the following options:
Phone memory - download all contacts stored in your phone memory. SIM card only - download all contacts stored in your SIM card. Phone and SIM - download all contacts stored in both your phone memory and SIM card. Press SELECT to continue. During the download, the telephone displays CL) Downloading. All other idle system handsets display CL) Downloading... Your cell phone may require you to press a key to confirm the directory download. Your cell phone may require a passcode. In this case 28 Caller ID log Intercom Page all devices Bluetooth BACK SELECT BLUETOOTH Add device Device list Download dir BACK SELECT DOWNLOAD DIR A:Cell Phone A B:Cell Phone B BACK SELECT DOWNLOAD FROM Phone memory SIM card only Phone and SIM BACK SELECT Cell Phone A Downloading entry #0001... STOP Cell Phone A Downloading entry #0001... STOP Download ended XXXX entries saved. BACK OK Bluetooth Bluetooth setup If the selected devices directory has already been downloaded to TL86103 before, the handset displays the date of the last download from your cell phone. The directory stored on the TL86103 for that cell phone will be erased and replaced with the current cell phone directory. If you have edited the downloaded entries, those changes will be lost. Press NEXT to start the download. If you already have 4 downloaded directories, the telephone base displays Memory is full. Replace existing directory? Press YES if replace an existing directory. Highlight the cell phone directory replaced and press SELECT. The screen displays Replace Cell Phone A directory? Press YES to confirm. 5. When the downloading process is complete, the handset displays Download ended XXXX entries saved. You hear a confirmation tone. Press OK to return to the Bluetooth menu. NOTES:
Certain cell hones do not support SIM card download. If this is the case, transferr the contacts from your SIM card to your cell phone memory first, and then download from your cell phone memory. For more information on how to transfer contacts from your SIM card to your cell phone memory, see the users manual of your cell phone. If Phone memory is chosen but with no entries saved, the telephone base displays No entries found. Download from SIM only? Press YES to confirm. If SIM card only is chosen but with no entries saved, the handset displays No entries found. Download from Phone only? Press YES to confirm. If Phone and SIM are chosen but with no entries saved in either or both directories, the telephone base displays No entries found. Download from Phone only? Press YES to confirm. When downloading the directory from your Bluetooth enabled cell phone, some data may not transfer. For example, if you have home, mobile and work numbers for a particular contact, the three categories may not transfer to your TL86103. For certain cell phones, you may need to press a key to confirm the directory download. 29 Bluetooth Bluetooth setup Interruption to directory download If you are downloading a directory from a cell phone and the phone receives a call, the download process stops and the telephone base displays Download failed and all the handsets display CL) Download fail. When you try to view the downloaded directory, the telephone base and handsets display Last Download failed: MM/DD/YY. You need to download the directory again
(see page 28). When you are downloading a directory from a cell phone and you wish to stop the download process, you may press STOP . The telephone base displays Download directory cancelled. The telephone base displays CL) Download fail when it returns to idle mode. NOTE: During the download process, do not attempt to make changes to your cell phone directory.
-OR-
View the directory download information 1. Press MENU on the telephone base in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to choose the desired downloaded directory, and then press OPTION . Press CID, DIR, /RECORD or /DELETE to highlight Last update, and then press SELECT . The telephone base displays Cell phone A Last Update: MM/DD/YY Total #XXXX. 2. 3. 4. Answering sys Directory Caller ID log Intercom BACK SELECT CELL PHONE A Cell area code Last update Remove dir BACK SELECT CELL PHONE A Last update 29/07/13 Total #0159 BACK OK The telephone base displays Cell phone A Last Download failed: MM/DD/YY if there was an interruption during that directory download. 5. Press OK to exit. NOTE: If a handset tries to access the directory while a Bluetooth directory download is in progress, the screen shows Not available at this time. 30 Bluetooth Bluetooth setup Change PIN You may be required to enter a PIN when establishing a Bluetooth connection. The default PIN of your telephone base is 0000. To change the PIN:
1. Press MENU on the telephone base in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . 3. Press CID, DIR, /RECORD or /DELETE to highlight Change PIN, and then press SELECT . The telephone base displays ENTER NEW PIN and the existing PIN. 4. Use the dialing keys to enter a new 4-digit code. BLUETOOTH Device list Download dir Change PIN BACK SELECT ENTER NEW PIN 0000 BACK SET Press /DELETE to erase a digit. Press and hold /DELETE to erase all digits. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. 5. Press SET to save. Cell ringer If this feature is on and you have connected an iPhone (iOS 4.1 or later) to your telephone system, the telephone plays your iPhone ringtone when there is incoming call. 1. Press MENU on the telephone base in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Bluetooth, and then press SELECT . 3. Press CID, DIR, /RECORD or /DELETE to highlight Cell ringer, and then press SELECT . If there is more than one paired device on the device list, press CID, DIR, /RECORD or
/DELETE to highlight the desired device, and then press SELECT . BLUETOOTH Download dir Change PIN Cell ringer BACK SELECT CELL RINGER
On Offf BACK SET 4. Press CID, DIR, /RECORD or /DELETE to choose On or Off, and then press SET . NOTE: The quality of ringtone played on your telephone is subject to individual ringtone characteristics. 31 Telephone settings Handset and telephone base settings Use the menu to change the telephone base or cordless handset settings. Using a cordless handset:
1. Press MENU when the cordless handset is not in use to enter the main menu. Press CID or DIR to highlight the feature to be changed. When scrolling through the menu, the selected menu item is highlighted. Press SELECT to select the highlighted item. Using the telephone base:
1. Press MENU when the telephone base is not in use to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight the feature to be changed. When scrolling through the menu, the selected menu item is highlighted. Press SELECT to select the highlighted item. 2. 3. 2. 3. NOTE: Press OFF/CANCEL on the handset or CANCEL on the telephone base to cancel an operation, back up to the previous menu or exit the menu display. Press and hold OFF/CANCEL on the handset or CANCEL on the telephone base to return to idle mode. 32 Telephone settings Handset and telephone base settings Ringer volume You can select the ringer volume for incoming calls on all lines. Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Ringers, and then press SELECT . Press SELECT to choose Ringer volume. Press CID or DIR to highlight All lines, Line 1, Line 2, Cell A, Cell B or PC call, and then press SELECT . Press CID or DIR to sample each ringer volume. Press SET to save. Your hear a confirmation tone and the screen returns to the previous menu. RINGERS Ringer volume Ringer tone BACK SELECT RINGERS All lines Line 1 Line 2 BACK SELECT Using the telephone base:
1. 2. RINGER VOLUME BACK SET RINGERS BACK S Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Ringers, and then press SELECT . Press SELECT to choose Ringer volume. Press CID, DIR, /RECORD or /DELETE to highlight All lines, Line 1, Line 2, Cell A, Cell B or PC call, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to sample each ringer volume. Press SET to save. Your hear a confirmation tone and the screen returns to the previous menu.
-OR-
Press /VOLUME/ on the telephone base to set the ringer volume while the telephone base is in idle mode to set the ringer volume of the telephone base. Press SET to confirm and you hear a confirmation tone. BACK BACK RINGERS Ringer volume Ringer tone
SELECT
SELECT NOTES:
Changing the handset ringer volume does not affect the base ringer volume. If the ringer volume is set to off, that handset is silenced for all incoming calls. The ringer volume level also determines the ringer levels of intercom calls (page 73). If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID wont be announced. 33 3. 4. 5. 6. 3. 4. 5. 6. 1. 2. Telephone settings Handset and telephone base settings Ringer tone You can select the ringer tones for incoming home and cell calls. Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Ringers, and then press SELECT . Press CID or DIR to highlight Ringer tone, and then press SELECT . Press CID or DIR to highlight All lines, Line 1, Line 2, Cell A, Cell B or PC call, and then press SELECT . Press CID or DIR to sample each ringer tone. A sample of each ringer tone plays as you scroll through the choices. Press SELECT to save. You hear a confirmation tone and the screen returns to the previous menu. RINGER TONE All lines Line 1 Line 2 BACK SELECT RINGERS 1 2 3 BACK SELECT RINGER TONE Using the telephone base:
1. 2.
SELECT All lines Line 1 Line 2 BACK Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Ringers, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Ringer tone, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight All lines, Line 1, Line 2, Cell A, Cell B or PC call, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to sample each ringer tone. A sample of each ringer tone plays as you scroll through the choices. Press SELECT to save. You hear a confirmation tone and the screen returns to the previous menu. RINGER TONE
1 2 32 3. 4. 5. 6. 3. 4. 5. 6. NOTE: When you turn off the ringer volume, you will not hear ringer tone. 34 Telephone settings Handset and telephone base settings LCD language You can select English, French, or Spanish to be used for all screen displays. Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Settings, and then press SELECT . Press SELECT to choose LCD language. Press CID or DIR to choose from English, Franais or Espaol, and then press SELECT . The screen prompts Set English/Franais/Espaol as LCD language?
Press YES to confirm. Your hear a confirmation tone and the screen returns to the previous menu. Press NO to cancel the operation. Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . Press SELECT to choose LCD language. Press CID, DIR, /RECORD or /DELETE to choose from English, Franais or Espaol, and then press SELECT . The screen prompts Set English/Franais/
Espaol as LCD language?
Press YES to confirm. Your hear a confirmation tone and the screen returns to the previous menu. Press NO to cancel the operation. 3. 4. 5. 3. 4. 5. SETTINGS LCD language Voicemail #
Clear voicemail BACK SELECT LCD LANGUAGE E nglish Francais Espanol BACK SELECT
, SETTINGS LCD language Voicemail #
Clr voicemail BACK
SELECT LCD LANGUAGE English Francais
, Espanol NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU on the handset or telephone base in idle mode, and then enter 364#. To reset the LCD language back to English during a call, press OPTION on the handset or telephone base, and then enter 364#. 35 Telephone settings Handset and telephone base settings Set date/time The answering system announces the day and time of each message prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. If you do not want to set the date and time automatically with caller ID information, turn this feature off (see Use caller ID to automatically set date and time on page 42). However, the year must be correct so that the day of the week can be calculated from the caller ID information. Before using the answering system, set the date and time as follows. After handset registration or a power failure, the handset or telephone base will prompt you to set the date and time. Follow the steps below to set the month, day, year and time. Using a cordless handset:
To set the date and time manually:
1. 2. SET DATE 07/29/13 MM/DD/YY K S BACK SELECT Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Set date/time, and then press SELECT . Press CID or DIR to choose the month, and then press NEXT, or enter the 2-digit number using the dialing keys. Press CID or DIR to choose the day, and then press NEXT, or enter the 2-digit number using the dialing keys. Press CID or DIR to choose the year, or enter the 2-digit number using the dialing keys, and then press NEXT to move on to set the time. Press CID or DIR to choose the hour, and then press SAVE, or enter the 2-digit number using the dialing keys. Press CID or DIR to choose the minute, and then press SAVE, or enter the 2-digit number using the dialing keys. Press CID or DIR to highlight AM or PM, or press 2 for AM or 7 for PM, and then press SAVE to confirm. You hear a confirmation tone and the screen returns to the previous menu. 05:41 PM K S BACK SELECT SET TIME 3. 4. 5. 6. 7. 8. 36 Telephone settings Handset and telephone base settings Using the telephone base:
To set the date and time manually:
1. 2. BACK
NEXT SET TIME 05:41 PM SET DATE 07/29/13 MM/DD/YY Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Set date/time, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to choose the month, and then press NEXT, or enter the 2-digit number using the dialing keys. Press CID, DIR, /RECORD or /DELETE to choose the day, and then press NEXT, or enter the 2-digit number using the dialing keys. Press CID, DIR, /RECORD or /DELETE to choose the year, or enter the 2-digit number using the dialing keys, and then press NEXT to move on to set the time. Press CID, DIR, /RECORD or /DELETE to choose the hour, and then press SAVE, or enter the 2-digit number using the dialing keys. Press CID, DIR, /RECORD or /DELETE to choose the minute, and then press SAVE, or enter the 2-digit number using the dialing keys. Press CID, DIR, /RECORD or /DELETE to highlight AM or PM, or press 2 for AM or 7 for PM, and then press SAVE to confirm. You hear a confirmation tone and the screen returns to the previous menu.
SAVE BACK 3. 4. 5. 6. 7. 8. NOTE: If the clock is not set when a message is recorded, the system announces, Time and day not set, before it plays the message. 37 Telephone settings Handset and telephone base settings Caller ID announce The caller ID announce feature lets you know whos calling without having to look at the display. When you have an incoming call, the handset and/or base speaks Call from... and the name of the caller based on the directory or caller ID information. If the callers name is private or unknown, the phone number up to the last 11 digits will be spoken. If the callers phone number is also private or unknown, no information will be spoken. By default, the caller ID announce feature is programmed On. To turn on/off the caller ID announce:
Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Caller ID Annc, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to choose On or Off, and then press SELECT . You hear a confirmation tone and the screen shows CID Annc ON/OFF on all HS & BS briefly before returning to the previous menu. Bluetooth Ringers Set date/time Caller ID Annc BACK SELECT CALLER ID ANNC Off
On BACK SELECT NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. When there are up to five handsets registered, the telephone system supports caller ID announce for all handsets. If six or more handsets are registered, the system supports caller ID announce for the first four registered handsets only. This feature does not announce information for call waiting calls. When this feature is on, the telephone plays both the caller ID information and the ringer at the same time when there is an incoming call. It takes at least two rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone wont have time to announce the callers information. Pronunciation of names may vary with this feature. Not all names may be pronounced correctly. Caller ID announce is available in English only. When this feature is on, the telephone plays both the caller ID information and the ringer at the same time when there is an incoming call. 38 3. Telephone settings Handset and telephone base settings Set speed dial voicemail number This feature lets you save your voicemail number for easy access when you press and hold the To set your voicemail number:
1 key. Using a cordless handset:
1. Press MENU in idle mode to enter the main menu. 2. Press CID or DIR to highlight Settings, and then press SELECT. 3. Press CID or DIR to highlight Voicemail #, and then press SELECT. 4. Press CID or DIR to highlight Line 1 or Line 2, and then press SELECT. 5. Use the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits) when prompted. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press and hold REDIAL/PAUSE to enter a dialing pause
(a p appears). SETTINGS Voicemail #
Clear voicemail Key Tone BACK SELECT VOICEMAIL #
LINE 1 LINE 2 BACK SELECT VOICEMAIL #
800-222-311-
BACKSP SAVE 6. Press SAVE to confirm. There is a confirmation tone and the screen displays Voicemail # saved then returns to the previous menu. 39 Telephone settings Handset and telephone base settings Using a the telephone base:
1. Press MENU in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight Voicemail #, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Line 1 or Line 2, and then press SELECT. 5. Use the dialing keys to enter the voicemail access number provided by your telephone service provider
(up to 30 digits) when prompted. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a digit. Press and hold /DELETE to erase all digits. Press and hold REDIAL/PAUSE on the telephone base to enter a dialing pause (a p appears). 6. Press SAVE to confirm. There is a confirmation tone and the screen displays Voicemail # saved then returns to the previous menu. 40 Telephone settings Handset and telephone base settings Voicemail (visual message waiting) number If you subscribe to a voicemail service offered by your telephone service provider, New voicemail and the handset screens when you have new voicemail messages. Contact your service provider for more information and assistance about using your voicemail service. icon appear on the telephone base and NOTES:
This feature does not indicate new messages recorded on your phones built-in answering system. For more information about the difference between your answering system and voicemail, see page 114. Clear voicemail indication Use this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while away from home. This feature only turns off the displayed New voicemail and the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicator. To manually turn off the new voicemail indicator:
Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Settings, and then press SELECT . Press CID or DIR to highlight Clear voicemail, and then press SELECT . The screen shows Reset Voicemail Indication?
Press YES to turn the voicemail indicator off. You hear a confirmation tone and the screen returns to the previous menu. 3. 4. Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Clear voicemail, and then press SELECT . The screen shows Reset Voicemail Indication?
Press YES to turn the voicemail indicator off. You hear a confirmation tone and the screen returns to the previous menu. 3. 4. SETTINGS LCD language Voicemail #
Clear voicemail BACK SELECT Reset voicemail indication?
NO YES SETTINGS LCD language Voicemail #
Clear voicemail BACK SELECT Reset voicemail indication?
NO YES NOTES:
Your telephone service provider voicemail might alert you to new messages with a stutter
(broken) dial tone. Contact your telephone service provider for more details. 41 3. 4. 5. 3. 4. 5. Telephone settings Handset and telephone base settings Key tone The telephone base and handset are set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps when you press keys. SETTINGS Voicemail #
Clear voicemail Key tone BACK SELECT Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Settings, and then press SELECT. Press CID or DIR to highlight Key tone, and then press SELECT . Press CID or DIR to select the desired volume or Off. Press SET to confirm. You hear a confirmation tone and the screen returns to the previous menu. BACK S KEY TONE BACK SET Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Settings, and then press SELECT. Press CID or DIR to highlight Key tone, and then press SELECT . Press CID or DIR to select the desired volume or Off. Press SET to confirm. You hear a confirmation tone and the screen returns to the previous menu. SETTINGS Key tone CID time sync Dial mode BACK
SELECT KEY TONE BACK
SET Use caller ID to automatically set date and time If you subscribe to caller ID service, the date and time will be set automatically by the caller ID information. Follow the steps below to turn the CID time sync feature on or off. The default setting is On. Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight CID time sync, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to select On or Off, and then press SELECT to save. You hear a confirmation tone and the screen returns to the previous menu. 3. 4.
SETTINGS Clear voicemail Key tone CID time sync BACK
SELECT CID TIME SYNC On Off BACK
SELECT 42 Telephone settings Handset and telephone base settings Home area code If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number. This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits. Using a cordless handset:
1. 2. 3. 4. 5. 6. HOME AREA CODE
Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Directory, and then press SELECT . Press OPTION to choose Home. Press CID or DIR to highlight Home area code, and then press SELECT . The screen briefly shows Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter a three-digit home area code. Press SAVE to confirm. You hear a confirmation tone and the screen shows Area code will not show in Caller ID log briefly before returning to the previous menu. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the left or right. HOME AREA CODE BACKSP SAVE
BACKSP SAVE NOTE:
If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code plus telephone number), you need to delete your home area code. With the home area code displayed, press and hold MUTE/DELETE on the handset or press and hold
/DELETE on the telephone base until the digits are deleted, and then press on the telephone base until the digits are deleted, and then press SAVE . The home area code is now restored to its default setting of _ _ _ (empty). 43 Telephone settings Handset and telephone base settings Using the telephone base:
1. 2. 3. 4. 5. 6. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT . Press OPTION to choose Home. Press CID, DIR, /RECORD or /DELETE to highlight Home area code, and then press SELECT . The screen briefly shows Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter a three-digit home area code. Press /DELETE base to erase a digit. Press and hold /DELETE to erase all digits. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press SAVE to confirm. You hear a confirmation tone and the screen shows Area code will not show in Caller ID log briefly before returning to the previous menu. 44 Telephone settings Handset and telephone base settings Cell area code Most cell phone entries are stored in a 10-digit format. If all of your cell phone entries are stored this way, you do not need to program your cell area code. If your cell phone stores entries in a 7-digit format, we recommend that you program your cell area code so that your 7-digit directory entries can be dialed correctly using your line 1 or line 2. Using a cordless handset:
1. 2. CELL AREA CODE
Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Directory, and then press SELECT . Press CID or DIR to highlight a desired downloaded directory, and then press OPTION . Press CID or DIR to highlight Cell area code, and then press SELECT . The screen briefly shows Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter a three-digit home area code. Press SAVE to confirm. You hear a confirmation tone and the screen shows Area code will not show in Caller ID log briefly before returning to the previous menu. Press MUTE/DELETE to erase a digit. Press and hold MUTE MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the left or right. BACKSP SAVE 3. 4. 5. 6. 45 Telephone settings Handset and telephone base settings Using the telephone base:
1. 2. 3. 4. 5. 6.
BACKSP CELL AREA CODE Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight a desired downloaded directory, and then press OPTION . Press CID, DIR, /RECORD or /DELETE to highlight Cell area code, and then press SELECT . The screen briefly shows Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter a three-digit home area code. Press /DELETE base to erase a digit. Press and hold /DELETE to erase all digits. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. SAVE Press SAVE to confirm. You hear a confirmation tone and the screen shows Area code will not show in Caller ID log briefly before returning to the previous menu. 46 Telephone settings Handset and telephone base settings Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Dial mode, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to choose Touch-tone or Pulse, and then press SELECT. The screen shows Dial mode is touch-tone or Dial mode is pulse. You hear a confirmation tone and the screen returns to the previous menu. 3. 4. SETTINGS LCD language Line preference Voicemail #
SELECT BACK DIAL MODE
Auto Line 12 Line 2 BACK
SELECT Line preference The line preference setting determines the default line for the corded handset and speakerphone on a cordless handset and the telephone base for outgoing calls. Using the telephone base:
1. Press MENU in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . 3. Press CID, DIR, /RECORD or /DELETE to highlight Line preference, and then press SELECT . 4. Press CID, DIR, /RECORD or /DELETE to highlight Auto, Line 1 or Line 2, and then press SELECT . 5. Press SELECT to save. You hear a confirmation tone and the screen returns to the previous menu. NOTE: If both line 1 and line 2 are in use or on hold, the telephone system will take line 1. 47 Telephone settings Handset and telephone base settings QUIET mode When QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using the speakerphone or setting ringer volume, will sound as normal. After you turn on QUIET mode, this feature activates immediately and the answering system turns on automatically. When QUIET mode is on, the answering system takes calls and records messages without broadcasting them. To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode setting screen. The screen shows SET QUIET MODE DURATION (1 to 12 hours) _ _. 2. Use the dialing keys to enter the desired number of hours (1-12) you would like to turn on QUIET mode, and then press SELECT. Your screen briefly shows Answering sys is ON during quiet mode and then in the idle screen. To turn QUIET mode off:
While QUIET mode is on, press and hold QUIET #. The screen then shows Quiet mode is off and you hear a confirmation tone. NOTES:
If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode is on, the sample plays but the feature is still muted after saving the setting. After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again. The PTT function is not available when QUIET mode is on. Web address You can use this feature to view the AT&T website address. Using a cordless handset:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Web address, and then press SELECT . The screen shows the AT&T website address. Press OK to exit. 3. Caller ID Annc Settings Web address Voice commmad BACK
SELECT Using the telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD or /DELETE to highlight Web address, and then press SELECT . The screen shows the AT&T website address. Press OK to exit. 3. 48 Telephone settings Handset and telephone base settings No line alert If there is no telephone line connected to line 1 and/or line 2 of the telephone base, the screens show L1) No line and/or L2) No line. If you do not want to display this message on the screens (for example, if you use the cell line only), you can turn the No line alert off using the code described below. To turn off the No line alert:
Press MENU on the handset or telephone base in idle mode, and then enter 662#. You hear a confirmation tone. To turn the No line alert back on:
Press MENU on the handset or telephone base in idle mode, and then enter 661#. You hear a confirmation tone. Cell alert If you have downloaded the Connect to Cell application and use the Alerts manager (page 18), there are message notifications sent to your telephone system. Your telephone system beeps once when your Android cell phone receives text messages, e-mails or social media updates. You can turn the alert tone on or off using the code described below. To turn the alert tone off:
Press MENU on the handset or telephone base in idle mode, and then enter 252#. You hear a confirmation tone. To turn the alert tone back on:
Press MENU on the handset or telephone base in idle mode, and then enter 251#. You hear a confirmation tone. 49 Telephone operation Telephone operation Telephone operation Make, answer or end a line 1 or line 2 call The TL86103 telephone base can be used to make or answer calls on 2 individual landlines. You can connect a maximum of 2 telephone lines to the telephone base. Using a cordless handset:
To make a call on line 1 or line 2:
Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER, and then enter the telephone number. To predial a call on line 1 or line 2:
Enter the telephone number, and then press LINE 1/FLASH, LINE 2/FLASH or
/SPEAKER. To answer a call on line 1 or line 2:
Press LINE 1/FLASH, LINE 2/FLASH, /SPEAKER, or any dialing key (0-9 or TONE ). To end a call on line 1 or line 2:
Press OFF/CANCEL, or put the cordless handset into the charger. Using the telephone base:
To make a call on line 1 or line 2:
Press 1 LINE, 2 LINE, SPEAKER the telephone number.
, or lift the corded handset, and then enter To predial a call on line 1 or line 2:
Enter the telephone number, and then press 1 LINE, 2 LINE or /SPEAKER. To answer a call on line 1 or line 2:
Press 1 LINE, 2 LINE, SPEAKER corded handset.
, any dialing key (0-9 or TONE ), or lift the To end a call on line 1 or line 2:
Press the corresponding cell button, 1 LINE or 2 LINE.
-OR-
Press SPEAKER or return the corded handset to the telephone base. NOTES:
The screen shows the elapsed time as you talk (in hours, minutes and seconds). When predialing (preview numbers before dialing), press MUTE/DELETE on the handset or
/DELETE on the telephone base to backspace and delete; press and hold REDIAL/PAUSE on the handset or REDIAL/PAUSE on the telephone base to insert a dialing pause (a p appears). You cannot answer a call on line 1 or line 2 using your connected cell phone. 50 Telephone operation Telephone operation Using a Bluetooth, headset, DECT headset or a wireless speaker:
You can use a Bluetooth headset, a DECT headset or a wireless speaker for calls on line 1 or line 2. However, you need to keep the device within 15 feet of the telephone base for optimal performance. Please see the users manual of your Bluetooth headset for more information of Bluetooth headset. To answer or end a call on line 1 or line 2 using a Bluetooth headset:
Press the call key on your bluetooth headset. To answer or end a call on line 1 or line 2 using a DECT headset:
Press ON/OFF on your DECT headset. To answer or end a call on line 1 or line 2 using a Wireless speaker:
Press PHONE on your wireless speaker. If you make or answer a call on line 1 or line 2 on a handset, you can transfer the call to your headset. The handset remains active, but the handset earpiece and microphone are muted. If you hang up the handset, the call ends. To transfer a call from a handset to a Bluetooth headset:
Using the telephone base:
Press OPTION during a call on line 1 or line 2. Press CID, DIR, /RECORD or /DELETE to highlight Use BT headset, and then press SELECT. The telephone base displays Transferring audio to Headset A, the message disappears if the call is successfully transferred to the Bluetooth headset. To transfer a call from a handset to a DECT headset or a wireless speaker:
Using a cordless handset or the telephone base:
Press OPTION during a call on line 1 or line 2. Press CID or DIR on a handset, or CID, DIR, /RECORD or /DELETE on the telephone base, to highlight Intercom, and then press SELECT. Press CID or DIR on a handset, or CID, DIR, /RECORD or /DELETE on the telephone base, to highlight <HDST/SPK X>, and then press SELECT. Press CID or DIR on a handset, or CID, DIR, /RECORD or /DELETE on the telephone base, to highlight Transfer, and then press SELECT. 51 Telephone operation Telephone operation To transfer a call from the Bluetooth/DECT headset or wireless speaker back to the handset:
Using the telephone base:
Press OPTION, and then press CID, DIR, /RECORD or /DELETE to highlight Use handset and press SELECT. To end a call that started at the handset:
Using a cordless handset:
Press OFF/CANCEL, or put the cordless handset into the charger. Call waiting on line 1 or line 2 If you subscribe to call waiting service from your telephone service provider, you hear a tone if someone calls while you are already on a call. Press the corresponding line button, LINE 1/FLASH or LINE 2/FLASH on the handset, or press FLASH on the telephone base to put your current call on hold and take the new call. Press the same key at any time to switch back and forth between calls. 52 Telephone operation Telephone operation Make, answer or end a cell call The TL86103 can be used to make or answer calls on the cell line. You can connect a maximum of 2 Bluetooth enabled cell phones to the telephone base. Both cell phones can be used on cell calls at the same time. Using a cordless handset:
To make a cell call:
1. 2. Press A Cell or B Cell, and then enter the telephone number. Press DIAL or /SPEAKER. To predial a cell call:
Enter the telephone number, and then press A Cell or B Cell. To answer a cell call:
Press /SPEAKER, A Cell or B Cell. To end a cell call:
Press OFF/CANCEL, or put the cordless handset into the charger. Using the telephone base:
To make a cell call:
1. 2. Press DIAL or SPEAKER Press Cell A or Cell B , and then enter the telephone number.
, or lift the corded handset. To predial a cell call:
Enter the telephone number, and then press Cell A or Cell B . To answer a cell call:
Press SPEAKER
, Cell A or Cell B , or lift the corded handset. To end a cell call:
Press the corresponding cell button, Cell A or Cell B .
-OR-
Press SPEAKER or return the corded handset to the telephone base. NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the telephone base. If you do not want to answer the call, press REJECT . When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays Cellular phone not connected. Please connect to proceed. Press CONNECT on the telebase base to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle mode on page 25 and Connect/disconnect an active device on page 26. 53
-OR-
Telephone operation Telephone operation Call waiting on the cell line If you subscribe to call waiting service from your cell phone service provider, you hear a beep if someone calls while you are already on a call. To answer the incoming call from the same cell line:
Using a cordless handset:
Press SWAP, A Cell or B Cell on the handset. The original call is put on hold and you take the new call. Press OPTION on the handset. Press CID or DIR to highlight Swap. Press SELECT to resume the original call. The other incoming cell call is put on hold. Using the telephone base:
Press SWAP, Cell A or Cell B on the telephone base. The original call is put on hold and you take the new call. Press OPTION on the telephone base. Press CID or DIR to highlight Swap. Press SELECT to resume the original call. The other incoming cell call is put on hold. To answer the incoming call from the a different cell line:
Using a cordless handset:
Press A Cell or B Cell to put your current call on hold and take the new call. Press A Cell or B Cell at any time to switch back and forth between calls. Using the telephone base:
Press Cell A or Cell B to put your current call on hold and take the new call. Press Cell A or Cell B at any time to switch back and forth between calls. NOTE:
If you do not want to answer the incoming call from a different cell line, press REJECT . 54 Telephone operation Telephone operation Answer an incoming cell call while on line 1 or line 2 If you are on a call using line 1 or line 2 and you receive an incoming cell call, B displays on the cordless handset or you hear a beep and A telephone base you are using. The telephone base and all other handsets ring. B , or A
, To answer the incoming cell call:
Using a cordless handset:
Press A Cell or B Cell to answer the incoming cell call. The call on line 1 or line 2 is automatically placed on hold, all other handsets and the telephone base display L1) On hold and/or L2) On hold. At the same time, the screens will display CL) A In use, CL) B In use, or CL) A&B In use. Using the telephone base:
Press Cell A or Cell B to answer the incoming cell call. The call on line 1 or line 2 is automatically placed on hold, all handsets and the telephone base display L1) On hold and/or L2) On hold. At the same time, the screens will display CL) A In use, CL) B In use, or CL) A&B In use. To end the cell call:
Using a cordless handset:
Press OFF/CANCEL. Line 1 or line 2 is still on hold. The telephone base and all other handsets display L1) On hold and/or L2) On hold. Using the telephone base:
Press Cell A or Cell B . Line 1 or line 2 is still on hold. All handsets display L1) On hold and/or L2) On hold. To resume the call on line 1 or line 2 On hold:
Using a cordless handset:
Press LINE 1/FLASH or LINE 2/FLASH on the handset. Using the telephone base:
Press 1 LINE or 2 LINE on the telephone base. 55 Telephone operation Telephone operation Answer an incoming call on line 1 or line 2 while on a cell call If you are on a cell call and you receive an incoming call on line 1 or line 2, you hear a beep, and then the handset or telephone base you are using. The telephone base and all other handsets ring.
, and Incoming call displays on
, or
, To answer the incoming call on line 1 or line 2:
Using a cordless handset:
Press LINE 1/FLASH or LINE 2/FLASH on the cordless handset to answer the incoming call on line 1 or line 2. The cell call is automatically placed on hold. All screens display CL) A On hold, CL) B On hold, or CL) A&B On hold. At the same time, the screens will display L1) In use and/or L2) In use. Using the telephone base:
Press 1 LINE or 2 LINE on the telephone base to answer the incoming call on line 1 or line 2. The cell call is automatically placed on hold. All screens display CL) A On hold, CL) B On hold, or CL) A&B On hold. At the same time, the screens will display L1) In use and/or L2) In use. To end the call on line 1 or line 2:
Using a cordless handset:
Press OFF/CANCEL on the cordless handset. The cell line is still on hold. All devices display CL) A On hold, CL) B On hold, or CL) A&B On hold. Using the telephone base:
Press 1 LINE or 2 LINE on the telephone base. The cell line is still on hold. All devices display either CL) A On hold, CL) B On hold, or CL) A&B On hold. To resume the cell call On hold:
Using a cordless handset:
Press A Cell or B Cell on the handset. Using the telephone base:
Press Cell A or Cell B on the telephone base. NOTE: If you have turned on your answering system and you do not answer the incoming call on line 1 or line 2, the call is answered by your answering system. 56 Telephone operation Telephone operation Make, answer or end a softphone call You can receive or make calls on the traditional landlines, cell lines, or VoIP calls through Skype or Microsoft Lync when the phone system base is connected to the AT&T Unified Call Manager software installed on your computer. Install the AT&T Unified Call Manager using the CD-ROM provided in the package (see page 11). For detailed installation and operation instructions of the software, refer to the Installation and Operation Guide which can also be found in the CD-ROM provided. To make a softphone call:
Using a cordless handset or the telephone base:
1. 2. Enter the telephone number in idle mode. Press PC CALL to dial a softphone call. To answer the incoming softphone call:
Using a cordless handset:
Press /SPEAKER or ANSWER to answer the incoming softphone call. Using the telephone base:
Press SPEAKER call. or lift the corded handset to answer the incoming softphone To hold a softphone call:
Using a cordless handset or the telephone base:
Press HOLD to hold the softphone line. The screen displays PC CALL ON HOLD. Press PC CALL to resume the call. To end a softphone call:
Using a cordless handset:
Press OFF/CANCEL, or put the cordless handset into the charger. Using the telephone base:
Press SPEAKER or return the corded handset to the telephone base. NOTES:
During a incoming call, the screens display Skype and Lync without any specfic details about the name and number of the caller. If the caller ID announce (page 38) is turned on, the telephone will announce Call from Skype or Call from Lync. If you do not want to answer the call, press REJECT . Missed call from softphone is logged in the caller ID log of the telephone system. Skype or Lync is stored as the name of the caller id log entry. The cordless handset or the telephone base screens display P turned off. C when the ringer of PC call is 57 3. 3. Telephone operation Telephone operation Voice command TL86103 supports voice command recognition (VR) when the phone system is connected to AT&T Unified Call Manager at PC (see page 11). You can make calls through the voice command (name dialing) function using cordless handset, telephone base, DECT headset or wireless speaker while the phone system is idle and all lines are not in use. To make a call using voice command:
Using a cordless handset:
1. 2. Press MENU in idle mode. Press CID or DIR to highlight Voice Command, and then press SELECT . The screen displays Processing Voice command... Speak the name of a directory entry to dial. Using the telephone base:
1. 2. Press MENU in idle mode. Press CID, DIR, /RECORD or /DELETE to highlight Voice Command, and then press SELECT . The screen displays Processing Voice command... Speak the name of a directory entry to dial. NOTES:
When there is an incoming call from any line, the VR will be stopped immediately. To say a command again when processing, press STOP and select Voice Command again from the menu. If the voice command setting is set Disable in the AT&T Unified Call Manager, voice command requests will be rejected. 58 Telephone operation Conference calls Conference calls on line 1 and line 2 While you are on a call on line 1, and line 2 is on hold or in use, you can conference line 1 and line 2 using a handset or telephone base. To conference both line 1 and line 2:
Using a cordless handset:
1. 2. 3. Press OPTION. Press CID or DIR to highlight Conference. Press SELECT . The conferencing devices screen displays Conf. Press OPTION. Press CID, DIR, /RECORD or /DELETE to highlight Conference. Press SELECT . The conferencing devices screen displays Conf. Using the telephone base:
1. 2. 3. To select an option while on a conference call:
Using a cordless handset:
1. 2. Press OPTION. Press CID or DIR to highlight one of the following options:
End Line 1 End Line 2 Equalizer Caller ID log Directory Press SELECT . Using the telephone base:
1. 2. Press OPTION. Press CID, DIR, /RECORD or /DELETE to highlight one of the following options:
End Line 1 End Line 2 Equalizer Caller ID log Directory Press SELECT . 3. 3. NOTE: The option Use BT headset will appear in the options menu on the telephone base if there is an active headset in the Bluetooth device list. 59 Telephone operation Conference calls To end a conference call:
Using a cordless handset:
Press OFF/CANCEL, or put the cordless handset into the charger. The call continues until all people hang up. Using the telephone base:
Press 1 LINE, 2 LINE, or put the corded handset back to the telephone base. The call continues until all people hang up. Conference calls on line 1 or line 2 with cell calls When you have calls established on line 1 or line 2, and the cell line, you can create a 3-way conference. To conference line 1 or line 2 with cell calls:
Using a cordless handset:
1. 2. 3. Press OPTION. Press CID or DIR to highlight Conference. Press SELECT . The conferencing devices screen displays Conf. Using the telephone base:
1. 2. 3. Press OPTION. Press CID, DIR, /RECORD or /DELETE to highlight Conference. Press SELECT . The conferencing devices screen displays Conf. To select an option while on a conference call:
Using a cordless handset:
1. 2. Press OPTION. Press CID or DIR to highlight one of the following options:
End Line 1/2 End Cell A/B line Equalizer Caller ID log Directory Press SELECT . 3. 60 Telephone operation Conference calls Using the telephone base:
1. 2. Press OPTION. Press CID, DIR, /RECORD or /DELETE to highlight one of the following options:
End Line 1/2 End Cell A/B line Equalizer Caller ID log Directory Press SELECT . 3. NOTE: The option Use BT headset will appear in the options menu on the telephone base if there is an active headset in the Bluetooth device list. To end a conference call:
Using a cordless handset:
Press OFF/CANCEL, or put the cordless handset into the charger. The call continues until all people hang up. Using the telephone base:
Press 1 LINE, 2 LINE, Cell A , Cell B , or put the corded handset back to the telephone base. The call continues until all people hang up. Using line 1 or line 2 and cell lines together:
You can be on two different calls at the same time using a cell line and line 1 or line 2 with two handsets. You can be on a call using the cell line and a Bluetooth headset via line 1 or line 2 at the same time. If you are on a call using the cell line, you cannot join the call using your paired cell phone. However, you can join the call using another TL86103 device. Your cell phone is being used for the phone call so only features that are normally available during a call can be used. 61 Telephone operation Options while on calls Silencing the ringer When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone base without disconnecting the call. The next call rings normally at the preset volume. To silence the handset ringer:
Using a cordless handset:
Press SILENCE, OFF/CANCEL, MUTE/DELETE or QUIET #. The handset screen shows Ringer muted. To silence the base ringer:
Using the telephone base:
Press SILENCE, CANCEL or QUIET #. The telephone base screen shows Ringer muted. Page all devices This feature helps you find the misplaced devices. To start paging:
Using the telephone base:
1. 2. Press MENU in idle mode. Press Page all devices, and then press SELECT to start the paging tone on all handsets for 60 seconds. All idle handsets ring and display ** Paging **
To stop the paging tone on a cordless handset:
Press SILENCE, MUTE/DELETE, QUIET # or OFF/CANCEL. To end paging:
Using a cordless handset:
Press STOP on the telephone base, or LINE 1/FLASH, LINE 2/FLASH,
/SPEAKER, or any dialing key (0-9 or TONE ) on the handset. Using the telephone base:
Press 1 LINE, 2 LINE, CANCEL or QUIET # on the telephone base. NOTES:
If the handset ringer volume is set to off, the handset still rings when paged. If there is no response after 60 seconds, the paging ends. 62 Telephone operation Options while on calls Speakerphone If you are on speakerphone, are using. Using a cordless handset:
During a call, press /SPEAKER on the cordless handset to switch between the speakerphone and normal cordless handset use. displays on the handset or telephone base you Using a corded handset:
During a call, press SPEAKER speakerphone and normal corded handset use. on the telephone base to swtich between the Using the telephone base:
During a call, press SPEAKER on the telephone base to end a call. Join a call in progress Another handset can join you on an outside call. The call continues until all people hang up. You can share an outside call with telephone base and up to 4 system handsets. To join a call on line 1 or line 2:
Using a cordless handset:
Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER on another handset to join the call. Using the telephone base:
Press 1 LINE, 2 LINE or SPEAKER to join the call. To join a cell call:
Using a cordless handset:
Press A CELL or B CELL on another handset to join the call. Using the telephone base:
Press Cell A or Cell B to join the call. 63 Telephone operation Options while on calls Volume control While on a call, you can adjust the listening volume on the handset or telephone base. If it is a cell call and the volume is too loud, too quiet or drops out, try changing the volume on your cell phone. On some cell phones, changing the volume on the cell phone affects your cell call volume on a TL86103 cordless handset or telephone base. To adjust the listening volume of a cordless handset:
Press CID/VOLUME or DIR/VOLUME while on a call. To adjust the listening volume of the telephone base:
Press /VOLUME/ while on a call. NOTE: The handset earpiece volume setting (1-6) and speakerphone volume setting (1-6) are independent. The speakerphone volume setting of the telephone base (1-8) is also independent. Mute Use the mute function to turn off the microphone. You can hear the caller, but the caller cannot hear you. Using a cordless handset:
To mute a call:
While on a call, press MUTE/DELETE on the handset. When mute is on, the handset screen shows Microphone off for a few seconds and the MUTE icon appears until the mute function is turned off. To take a call off mute:
Press MUTE/DELETE on the handset and resume speaking, the MUTE icon disappears, and the screen shows Microphone on for a few seconds. Mute is automatically canceled when you end the call. Using the telephone base:
To mute a call:
While on a call, press MUTE on the telephone base. When mute is on, the handset screen shows Microphone off for a few seconds and the MUTE icon appears until the mute function is turned off. To take a call off mute:
Press MUTE on the telephone base and resume speaking, the MUTE icon disappears, and the screen shows Microphone on for a few seconds. Mute is automatically canceled when you end the call. 64 Telephone operation Options while on calls Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. During a call:
1. Press TONE on the handset or telephone base. 2. Use the dialing keys to enter the desired number. The telephone sends touch-tone signals. 3. The telephone automatically returns to pulse dialing after you end the call. Hold You can place any call on hold. You hear an alert tone at the telephone base if you have not taken the call off of hold after 14 minutes. You hear another alert tone at the telephone base 30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects. To place a call on line 1 or line 2 On hold:
Press HOLD on a handset or the telephone base. L1) On hold and/or L2) On hold appears on the handsets and telephone base.
, , or flashes on the screens of handsets and the telephone base. To resume a call on line 1 or line 2 On hold:
Press LINE 1/FLASH or LINE 2/FLASH on handsets, or 1 LINE or 2 LINE on the telephone base. To place a cell call On hold:
Press HOLD a the handset or the telephone base. CL) A On hold, CL) B On hold, or CL) A&B On hold appears on the handsets and telephone base. A telephone base. B flashes on the screens of handsets and the B, or A
, To resume a cell call On hold:
Press A CELL or B CELL on the handset or CELL A or CELL B on the telephone base. 65 Telephone operation Options while on calls Equalizer The equalizer feature enables you to change the audio quality to best suit your hearing. Using a cordless handset:
1. 2. 3. While on a call on line 1 or line 2 or cell call, press OPTION. Press CID or DIR to highlight Equalizer, and then press SELECT . Press CID or DIR to select Treble 1, Treble 2, Bass or Natural (the default setting), and then press SELECT . Using the telephone base:
1. 2. While on a call on line 1 or line 2 or cell call, press OPTION. Press CID, DIR, /RECORD or /DELETE to highlight Equalizer, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to select Treble 1, Treble 2, Bass or Natural (the default setting), and then press SELECT . 3. NOTES:
If you switch the call between the cordless handset and speakerphone pressing
/SPEAKER, or between the corded handset and speakphone by or SPEAKER the audio setting remains unchanged. The current equalizer setting remains unchanged until a new setting is selected.
, 66 Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. To access a number in the directory while on a call:
Using a cordless handset:
To access the directory while on a call:
1. Press OPTION. 2. Press CID or DIR to highlight Directory, and then press SELECT. 3. Press CID or DIR to highlight the desired directory, and then press REVIEW. 4. Press CID or DIR to highlight the desired entry or perform an alphabetical search (page 92). 5. Press DIAL to dial the number shown. To access the caller ID log while on a call:
1. Press OPTION. 2. Press CID or DIR to highlight Caller ID log, and then press SELECT. 3. Press CID or DIR to highlight the desired number. 4. Press CALL to dial the number shown. To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently dialed number. 2. Press CID or DIR to highlight the desired number. 3. Press DIAL to dial the number shown. 67 Telephone operation Options while on calls Using the telephone base:
To access the directory while on a call:
1. Press OPTION. 2. Press CID, DIR, /RECORD or /DELETE to highlight Directory and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight the desired directory, and then press REVIEW. 4. Press CID, DIR, /RECORD or /DELETE to highlight the desired entry. Press DIAL to dial the number shown. To access the caller ID log while on a call:
1. Press OPTION. 2. Press CID, DIR, /RECORD or /DELETE to highlight Caller ID log, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight the desired number. 4. Press CALL to dial the number shown. To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently dialed number. 2. Press CID, DIR, /RECORD or /DELETE to highlight the desired number. 3. Press DIAL to dial the number shown. NOTES:
You cannot edit a directory entry while on a call. For more details about the directory, see pages 85-86. You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID log, see pages 96-95. If you press REDIAL/PAUSE on a cordless handset while on a call, you can only view the ten most recently dialed numbers but you cannot erase the entries. If you press REDIAL/PAUSE on the telephone base while on a call, you can delete the entries by pressing /DELETE. For more details about the redial memory, see pages 69-72. Press OFF/CANCEL on a cordless handset or CANCEL on the telephone base to exit redial, directory or caller ID log when on a call. 68 Telephone operation Redial The telephone base and each cordless handset store the last 10 dialed numbers (up to 30 digits each) in the redial list. The redial entries of each cordless handset and the telephone base are independent. Review the redial list Using a cordless handset:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. Press OFF/CANCEL to exit. Using the telephone base:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID, DIR, /RECORD or /DELETE or REDIAL/PAUSE repeatedly to browse until the desired number displays. The telephone base beeps twice at the end of the list. Press CANCEL to exit. Dial a redial entry Using a cordless handset:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER to dial using line 1 or line 2, or press A Cell or B Cell to dial using the cell line. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER to dial using line 1 or line 2, or press A Cell or B Cell to dial using the cell line, and then press REDIAL/PAUSE . Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. If you are using the cell line, press INSERT to select the desired number. 3.
-OR-
1. 2. 3. Press DIAL to dial the number displayed. 69 Telephone operation Redial 3.
-OR-
1. 2. Using the telephone base:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID, DIR, /RECORD or /DELETE to browse until the desired number displays. The telephone base beeps twice at the end of the list. Press LINE 1, LINE 2 or SPEAKER Cell A or Cell B to dial using the cell line. to dial using line 1 or line 2, or press Press LINE 1, LINE 2 or SPEAKER to dial using line 1 or line 2, or press Cell A or Cell B to dial using the cell line, and then press REDIAL/PAUSE. Press CID, DIR, /RECORD or /DELETE, or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. If you are using the cell line, press INSERT to select the desired number. 3. Press DIAL to dial the number displayed. NOTES:
You can enter the area code in idle mode first, and then use the instructions above to highlight the desired entry, and press INSERT . The area code will be added in front of the selected redial number. 70 Telephone operation Redial Save a redial entry to the directory Using a cordless handset:
1. 2. 3. 4. Press REDIAL/PAUSE in idle mode. Press CID, DIR, or REDIAL/PAUSE repeatedly to browse until the desired number displays. Press SAVE. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, if necessary. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). 5 Press NEXT. 6. Press CID, DIR to select one of the following types:
Home Cell Work Other 7. Press NEXT. The screen displays ENTER NAME. Use the dialing keys
(page 88) to enter a name. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press CID or DIR to move the cursor to the right or left. 8. Press SAVE. The screen displays Saved. You hear a confirmation tone. 71 Telephone operation Redial Using the telephone base:
1. 2. 3. 4. Press REDIAL/PAUSE in idle mode. Press CID, DIR, /RECORD, /DELETE, or REDIAL/PAUSE repeatedly to browse until the desired number displays. Press SAVE. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, if necessary. Press /DELETE to erase a digit. Press and hold /DELETE to erase all digits. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). 5 Press NEXT. 6. Press CID, DIR, /RECORD or /DELETE to highlight one of the following types:
Home Cell Work Other 7. Press NEXT. The screen displays ENTER NAME. Use the dialing keys
(page 88) to enter a name. Press /DELETE to erase a character. Press and hold /DELETE to erase all characters. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. 8. Press SAVE. The screen displays Saved. You hear a confirmation tone. Delete a redial entry from the directory Using a cordless handset:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID or DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. Press MUTE/DELETE to delete the displayed number. You hear a confirmation tone. Using a the telephone base:
1. 2. Press REDIAL/PAUSE in idle mode. Press CID, DIR, /RECORD, /DELETE, or REDIAL/PAUSE repeatedly to browse until the desired number displays. Press /DELETE or DELETE to delete the displayed number. You hear a confirmation tone. 72 3. 3. Multiple handset use Intercom Use the intercom feature for conversations between two devices, or a device and the telephone base. You can buy additional expansion handsets (model AT&T TL86003) for this telephone base to expand your telephone system (up to 12 handsets). To initiate, answer, and end an intercom call:
Using a cordless handset:
1. Press MENU in idle mode to enter the main menu. Press Play messages Directory Caller ID log
CID or DIR to highlight Intercom, and then press SELECT. If you have one handset, the handset shows Calling base. If you have more than one handset, the handset shows INTERCOM TO: Use the dialing keys to eenter a specific device number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, TONE followed by # for all devices; # for a single DECT headset,
# followed by 1 or 2 for DECT headset/speaker 1 or DECT headset/speaker 2 respectively), or press CID or DIR to highlight the desired device and press SELECT. Your handset screen shows Calling HANDSET X, Calling Base or Calling all. INTERCOM TO:
BASE 0 HANDSET 2 BACK SELECT Intercom BACK SELECT The destination device(s) rings and shows HANDSET X is calling or HANDSET X is calling all (HANDSET represents the handset name, X represents the handset number). 2. To answer the intercom call, press LINE 1/FLASH, LINE 2/FLASH, SPEAKER, A CELL, B CELL, any dialing key (0-9, TONE ), or press
/SPEAKER ANSWER on the destination handset. Both devices now show Intercom. 3. To end the intercom call, press END, OFF/CANCEL, or put the cordless handset into the charger; or ppress END on the telephone base. Both devices display Intercom ended. 73 Multiple handset use Intercom Using the telephone base:
1. Press MENU in idle mode to enter the main menu. Press CID, DIR, /RECORD, or /DELETE to highlight Answering sys Directory Caller ID log Intercom
SELECT BACK Intercom, and then press SELECT. If you have one handset, the telephone base shows Calling HANDSET X. If you have more than one handset, the telephone base shows INTERCOM TO: Use the dialing keys to enter a specific handset number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, TONE followed by # for all devices; # for a single DECT headset, # followed by 1 or 2 for DECT headset/speaker 1 or DECT headset/speaker 2 respectively), or press INTERCOM TO:
HANDSET 1 HANDSET 2 All
SELECT BACK CID, DIR, /RECORD, or /DELETE to highlight the desired handset and press SELECT. The telephone base shows Calling HANDSET X or Calling all. The destination handset(s) rings and shows Base is calling, BASE is calling or BASE is calling all. 2. To answer the intercom call, press 1 LINE, 2 LINE, SPEAKER
, CELL A , CELL B , any dialing key (0-9, TONE ), ANSWER, or lift the corded handset. Both devices now show Intercom. 3. To end the intercom call, press END, OFF/CANCEL, or put the cordless handset into the charger; or ppress END on the telephone base. Both devices display Intercom ended. NOTES:
Before the intercom call is answered, you can cancel it by pressing OFF/OFF/CANCEL on the handset or END on the telephone base.. If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on a call, or is out of range, the initiating device shows No answer. Try again. To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the handset, or press CANCEL or /DELETE on the telephone base. You can only use one pair of devices at a time to make intercom calls. 74 Multiple handset use Intercom Answer an incoming call during an intercom call When you receive an incoming call on line 1 or line 2 during an intercom call, the two devices on the intercom call hear an alert tone. The screens display
, and Incoming call, and then the caller ID. The telephone
, or
, base rings and all other handsets ring. To answer a call on line 1 or line 2 during an intercom call:
Using a cordless handset:
Press LINE 1/FLASH, LINE 2/FLASH, or /SPEAKER line 1 or line 2. The intercom call ends automatically. Press OFF/CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. SPEAKER to answer the call on Using the telephone base:
Press 1 LINE, 2 LINE, SPEAKER call on line 1 or line 2. The intercom call ends automatically. Press BACK and then END to end the intercom call without answering the incoming call. The telephone continues to ring.
, or lift the corded handset to answer the When you receive an incoming cell call during an intercom call, the two devices on the intercom call hear an alert tone, and their screens display A A ring. B , or B, and then the caller ID. The telephone base rings and all other handsets
, To answer a cell call during an intercom call:
Using a cordless handset:
Press A CELL or B CELL to answer the cell call and the intercom call ends automatically. Press OFF/CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. Using the telephone base:
Press CELL A or CELL B to answer the cell call. The intercom call ends automatically. Press BACK and then END to end the intercom call without answering the incoming call. The telephone continues to ring. NOTES:
During an intercom on the DECT headset/wireless Speaker, press ON/OFF on the DECT headset and PHONE on the wireless Speaker to end the intercom session, and then the ringer of the imcoming call rings. Press ON/OFF on the DECT headset and PHONE on the wireless Speaker to answer the incoming call. 75 Multiple handset use Call transfer using intercom Use the intercom feature to transfer an outside call to another system device or the telephone base. You can also share an outside call with another system device or the telephone base. To transfer an outside call:
Using a cordless handset:
1. 2. When on an outside call, press OPTION. Press SELECT to choose Intercom. The call is automatically put on hold. If you have one handset, the outside call is put on hold and your handset displays Calling base. The telephone base rings and displays HANDSET is calling. If you have more than one handset, your handset displays INTERCOM TO:
Press CID or DIR to select a destination handset and then press SELECT. Your handset displays Calling HANDSET X or Calling BASE. The destination device rings and displays HANDSET X is calling. Intercom Equalizer Directory Caller ID log BACK SELECT INTERCOM TO:
BASE 0 HANDSET 2 All BACK SELECT
-OR-
Press 1-9 for HANDSET 1-9, TONE and 0 for HANDSET 10, TONE and 1 for HANDSET 11 or TONE and 2 for HANDSET 12; press # for a single DECT headset, # followed by 1 or 2 for DECT headset/speaker 1 or DECT headset/speaker 2 respectively. The destination handset rings and displays HANDSET X is calling. 3. To answer the intercom call on the other device, press ANSWER, LINE 1/FLASH, LINE 2/FLASH, /SPEAKER dialing key (0-9 or TONE ) on the destination handset, or press 1 LINE, 2 LINE, SPEAKER on the telephone base. Both handsets and the telephone base show Intercom and the outside call is still on hold. 4. From this intercom call, you have the following options:
SPEAKER, A CELL, B CELL or any You can transfer the call. Press OPTION and then press SELECT to select Transfer on the calling handset. Your screen shows Call transferred. The other handset automatically connects to the outside call. You can let the other device join you on the outside call in a 3-way conversation. Press OPTION, and then CID or DIR to highlight Share call, and press SELECT. You can end the intercom call and continue the outside call with your handset. Press OFF/CANCEL, END , LINE 1/FLASH, LINE 2/FLASH,
/SPEAKER SPEAKER, A CELL, B CELL on your handset (the outside call will automatically go off hold and reconnect with your handset). NOTES:
If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press OFF/CANCEL or END on the originating handset. If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on a call, or is out of range, the initiating device shows No answer. Try again. and returns to the outside call. 76 Multiple handset use Call transfer using intercom To transfer an outside call:
Using the telephone base:
1. 2. When on an outside call, press OPTION. Press SELECT to choose Intercom. The call is automatically put on hold. Answering sys Directory Caller ID log Intercom
SELECT BACK If you have one handset, the outside call is put on hold and your handset displays Calling HANDSET. The telephone base rings and displays BASE is calling. If you have more than one handset, your base displays INTERCOM TO:
Press CID, DIR, /RECORD, or /DELETE to select a destination handset and then press SELECT. Your telephone base displays Calling HANDSET X or Calling BASE. The destination device rings and displays BASE is calling. INTERCOM TO:
HANDSET 1 HANDSET 2 All
SELECT BACK
-OR-
Press 1-9 for HANDSET 1-9, TONE and 0 for HANDSET 10, TONE and 1 for HANDSET 11 or TONE and 2 for HANDSET 12; press # for a single DECT headset, # followed by 1 or 2 for DECT headset/speaker 1 or DECT headset/speaker 2 respectively. The destination handset rings and displays BASE is calling. 3. To answer the intercom call on any destination handset, press ANSWER, SPEAKER, A CELL, B CELL or any LINE 1/FLASH, LINE 2/FLASH, /SPEAKER dialing key (0-9 or TONE ) on the destination handset. Both handsets and the telephone base show Intercom and the outside call is still on hold. 4. From this intercom call, you have the following options:
You can transfer the call. Press OPTION and then press SELECT to select Transfer on the telephone base. Your screen shows Call transferred. The other handset automatically connects to the outside call. You can let the other device join you on the outside call in a 3-way conversation. Press OPTION, and then CID, DIR, /RECORD, or
/DELETE to highlight Share call, and press SELECT. You can end the intercom call and continue the outside call with your handset. Press CANCEL, END, 1 LINE, 2 LINE, SPEAKER
, CELL A or CELL B on the telephone base, or return the corded handset in the telephone base (the outside call will automatically go off hold and reconnect with the telephone base). NOTES:
If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press CANCEL or END on the telephone base. If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on a call, or is out of range, the initiating device shows No answer. Try again. and returns to the outside call. 77 Multiple handset use Push-to-talk (PTT) You can directly broadcast messages from one handset or telephone base to the speakerphone of one or a group of other devices. Press and hold PUSH TO TALK on a handset or PTT on the telephone base to begin a two-way communication. Only one device can talk at a time. While talking to another device, press and hold PUSH TO TALK on the handset or PTT on the telephone base. You must release PUSH TO TALK on the handset or PTT on the telephone base, so the other person can respond. Only one PTT session can be active at a time. While PTT is in use between two devices, other devices cannot use the intercom feature but can access the answering system. When you attempt to place a PTT call to another device which is accessing the answering system or on an intercom call or outside call, your device screen shows Not available at this time. PTT NOTE: The PTT function is not available when QUIET mode is on. Turn PTT on or off Using a cordless handset:
1. Press PUSH TO TALK when the handset is not in use. The PUSH TO TALK menu displays. 2. Press CID or DIR to highlight PTT On/Off, and then press SELECT. 3. Press CID or DIR to choose On or Off, and then press SELECT. Using the telephone base:
1. Press PTT when the telephone base is not in use. The PUSH TO TALK menu displays. 2. Press CID, DIR, /RECORD or /DELETE to highlight PTT On/Off, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to choose On or Off, and then press SELECT. NOTE: The handset or the telephone base screen displays PTT when PTT is turned off.
78 Multiple handset use Push-to-talk (PTT) PTT call to a single device Using a cordless handset:
1. There are a few ways to begin a PTT call to a single device. When the hand-
set is not in use:
If you have one handset, press and hold PUSH TO TALK. If you have more than one handset:
Press PUSH TO TALK on the handset, and then use the dialing keys to enter the destination device number.
-OR-
Press PUSH TO TALK on the handset. Press CID or DIR to highlight the destination device number, and then press SELECT or PUSH TO TALK. The handset shows Connecting to HANDSET X... (HANDSET represents the handset name, X represents the destination handset number) or Connecting to BASE 0... (BASE 0 represents the base name) for a few seconds. When the connection is made, both your and the destination device screens display Press and hold [PTT] to talk. 2. Press and hold PUSH TO TALK. A chirp indicates your microphone is on. Speak towards the device. Your voice is broadcast to the destination device. While you are speaking, your handset shows PTT To HANDSET X or PTT To BASE 0. 3. Release PUSH TO TALK after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk, and then you can press and hold PUSH TO TALK to continue speaking or the destination device can respond (see Answer a PTT call on page 82). 4. To end the PTT call, press OFF/CANCEL or END, or place the handset in the charger. The handset shows Push to talk ended. NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. 79 Multiple handset use Push-to-talk (PTT) Using the telephone base:
1. There are a few ways to begin a PTT call to a single handset. When the tele-
phone base is not in use:
If you have one handset, press and hold PTT. If you have more than one handset:
Press PTT, and then use the dialing keys to enter the destination handset number.
-OR-
Press CID, DIR, /RECORD or /DELETE to highlight the destination handset number, and then press SELECT or PTT. The telephone base shows Connecting to HANDSET X... (HANDSET represents the handset name, X represents the destination handset number) for a few seconds. When the connection is made, both the telephone base and destination handset display Press and hold [PTT] to talk. 2. Press and hold PTT. A chirp indicates your microphone is on. Speak towards the telephone base. Your voice is broadcast to the destination handset. While you are speaking, the telephone base shows PTT To HANDSET X. 3. Release PTT after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk, and then you can press and hold PTT to continue speaking or the destination device can respond (see Answer a PTT call on page 82). 4. To end the PTT call, press CANCEL or END. The telephone base shows Push to talk Ended for a few seconds. NOTE: After PTT is released, the PTT call remains open for a short time. If no one presses PTT within 10 seconds, the PTT call ends automatically. 80 Multiple handset use Push-to-talk (PTT) PTT call to multiple devices When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of one-to-four calls when one to five handsets are registered, and a maximum of one-to-three calls when six or more handsets are registered. The first three or four registered handsets will be able to use this feature. Other handsets can only use PTT for one-to-one calls. To call multiple devices:
Using a cordless handset:
1. You have two ways to call multiple devices. When the handset is not in use:
Press and hold PUSH TO TALK until the handset shows Connecting to group... Press PUSH TO TALK. Press CID or DIR to choose Group. Press SELECT or press PUSH TO TALK and your handset shows Connecting to group... When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold PUSH TO TALK when you want to speak. Speak towards the handset. Your voice is broadcast to all devices. 3. Release PUSH TO TALK after speaking. 4. Any extension can reply (see Answer a PTT call on page 74). NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within ten seconds, the PTT call ends automatically.ne. Using the telephone base:
1. You have two ways to call multiple handsets. When the telephone base is not in use:
Press and hold PTT until the screen shows Connecting to group... Press PTT. Press CID, DIR, /RECORD or /DELETE to choose Group. Press SELECT or PTT and the telephone base shows Connecting to group... When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold PTT when you want to speak. Speak towards the telephone base. Your voice is broadcast to all devices. 3. Release PTT after speaking. 4. Any extension can reply (see Answer a PTT call on page 82). NOTE: After PTT is released, the PTT call remains open for a short time. If no one presses PTT within ten seconds, the PTT call ends automatically. 81 Multiple handset use Push-to-talk (PTT) Answer a PTT call You can respond to a PTT call as described below. 2. 3. Using a handset or the telephone base:
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk. When the other party is speaking, your speakerphone light is on, and your device shows:
PTT From HANDSET X To devices: X (the first X represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear).
-OR-
PTT From BASE 0 To devices: X (the X represents your handset number; a maximum of four handset numbers appear). When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or PTT on your telephone base. You will hear a chirp. Speak towards the device. While you are speaking, your device shows PTT To Handset: X
(X represents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear) or PTT To devices: X (X represents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear). Your voice is broadcast to all destination devices. After speaking, release PUSH TO TALK on your handset or PTT on your telephone base. Your device will beep. After the beep, if your speakerphone light is off, you can press and hold PUSH TO TALK on your handset or PTT on your telephone base to continue speaking, or the destination device can respond. 82 Multiple handset use Push-to-talk (PTT) Change a one-to-one PTT call to an intercom call You can convert a one-to-one PTT session to an intercom call. Using a cordless handset or the telephone base:
1. 2. 3. 4. When your device shows Press and hold [PTT] to talk, press INTCOM. The screen shows Switch to Intercom?
Press SELECT. Your device displays Calling BASE or Calling HANDSET X. The destination device briefly shows Push to talk Ended and then HANDSET X is calling or BASE is calling. The destination device rings. Press LINE 1/FLASH, LINE 2/FLASH or any dialing keys (0-9, or TONE ) on the destination handset, or press 1 LINE, 2 LINE or any dialing keys (0-9, or TONE ) on the telephone base to answer the intercom call. Both devices now show Intercom. To end the intercom call, press OFF/CANCEL or END on your cordless handset, or place the cordless handset in the charger; or press END on the telephone base. Both screens show Intercom ended. Answer an incoming call during a PTT call When you receive an outside call during PTT, there is an alert tone. Using a cordless handset or the telephone base:
During a one-to-one PTT, press LINE 1/FLASH, LINE 2/FLASH, A CELL or B CELL on the initiating or destination handset, or press 1 LINE, 2 LINE, CELL A or CELL B on the telephone base. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press LINE 1/FLASH, LINE 2/FLASH, A CELL or B CELL on the initiating handset, or press LINE 1, LINE2, CELL A or CELL B on the telephone base. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press LINE 1/FLASH, LINE 2/FLASH, A CELLor B CELL on any one of the destination handsets, or press 1 LINE, 2 LINE, CELL A or CELL B on the telephone base. That device answers the outside call. The PTT call continues for the rest of the PTT participants. To leave the PTT call without answering the incoming call, press OFF/CANCEL on your handset or CANCEL on your telephone base. The telephone continues to ring. 83 Multiple handset use Push-to-talk (PTT) Make an outgoing call during PTT call Using a cordless handset or the telephone base:
During a one-to-one PTT call, press LINE 1/FLASH or LINE 2/FLASH on your handset or 1 LINE or 2 LINE on the telephone base to get a dial tone. The PTT call ends automatically. During a one-to-group PTT call, press LINE 1/FLASH or LINE 2/FLASH on the initiating handset or 1 LINE or 2 LINE on the telephone base. The PTT call ends automatically and you get a dial tone. During a one-to-group PTT call, press LINE 1/FLASH or LINE 2/FLASH on any one of the destination handsets or 1 LINE or 2 LINE on the telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants. End or leave a PTT call Using a cordless handset or the telephone base:
For one-to-one PTT calls, both initiating and destination devices can end the PTT call. For PTT calls to multiple devices, the initiating device can end the PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up. Press OFF/CANCEL or END on the handset, or press CANCEL or END on the telephone base. The screens show Push to talk Ended.
-OR-
Place the cordless handset in the charger, and then the handset returns to idle mode. The telephone base screen shows Push to talk Ended. NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or PTT on the telephone base within ten seconds, the PTT call ends automatically. 84 Directory About the directory The home directory stores up to 200 entries with up to 30 digits for each phone number and 15 characters for each name. Each of the downloaded directories stores up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name. Directory entries are stored at the telephone base and shared by all system handsets. Any changes made on one device apply to all. Only one device can review the directory at a time. If another device tries to enter the directory, its screen shows Not available at this time. When there are no records in the directory, the screen shows Directory empty. When the directory is full and you try to save an entry, the screen shows Directory full. When you try to save a number already stored in the directory, the screen shows Number already saved. All of the instructions on pages 78-86 for the directories apply to the home directory and all downloaded directories. Creating a new entry on pages 78-81 only applies to the home directory. You cannot create new entries in your downloaded directories from the TL86103 handset. Entries must be downloaded from your cell phone (see Download directory on pages 28-29). 85 Directory Create directory entries Create a new entry in the home directory Using a cordless handset:
1. Press MENU on the handset in idle mode to enter the main menu. 2. Press CID or DIR to highlight Directory, and then press SELECT. 3. Press OPTION to choose Home. 4. Press SELECT to choose Add contact. The screen displays ENTER NUMBER. 5. Use the dialing keys to entser a telephone number. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press and hold REDIAL/PAUSE to enter a dialing pause (a p appears).
-OR-
Copy a number from the redial list. Press REDIAL/PAUSE and then CID or DIR, or REDIAL/PAUSE repeatedly to locate the number. Press INSERT to copy the displayed number. 6. Press NEXT. 7. Press CID or DIR to highlight one of the following types:
Home Cell Work Other 8. Press NEXT. The screen displays ENTER NAME. 9. Use the dialing keys (see page 88) to enter a name (up to 15 characters). Press CID or DIR to move the cursor to the left or right. Press 0 to add a space. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press a>A to change the next letter to upper or lower case. 10. Press SAVE to confirm and the screen shows Saved. You hear a confirmation tone. 86 Directory Create directory entries Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT. 3. Press OPTION to choose Home. 4. Press SELECT to choose Add contact. The screen displays ENTER NUMBER. 5. Use the dialing keys to enter a telephone number. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a digit. Press and hold /DELETE to erase all digits. Press and hold REDIAL/PAUSE to enter a dialing pause (a p appears).
-OR-
Copy a number from the redial list. Press REDIAL/PAUSE and then CID or DIR, or REDIAL/PAUSE repeatedly to locate the number. Press INSERT to copy the displayed number. 6. Press NEXT. 7. Press CID, DIR, /RECORD or /DELETE to highlight one of the following types:
Home Cell Work Other 8. Press NEXT. The screen displays ENTER NAME. 9. Use the dialing keys (see page 88) to enter a name (up to 15 characters). Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press 0 to add a space. Press /DELETE to erase a character. Press and hold /DELETE to erase all characters. Press a>A to change the next letter to upper or lower case. 10. Press SAVE to confirm and the screen shows Saved. You hear a confirmation tone. 87 Directory Create directory entries Dialing keys 10
11
, Characters by number of key presses 3
C F I L O R V Y 4 a d g j m S t Z 5
b e h k n p u w 6
) c f i l o q v x 7
2 3 4 5 6 r 8 y 8
s z 9
7 9 1 1 A D G J M P T W space 2
. B E H K N Q U X 0 Dialing keys 1 2 3 4 5 6 7 8 9 0
NOTE: When entering a name in the directory, the first letter of each word is automatically capitalized. 88 Directory Create directory entries Add a predialed telephone number to the directory You can save a predialed telephone number to the directory. Using a cordless handset:
1. Enter the telephone number when in idle mode, and then press SAVE to move on to edit the number and then press NEXT. 2. Press CID or DIR to highlight one of the following types:
Home Cell Work Other 3. Press NEXT. The screen displays ENTER NAME. 4. Use the dialing keys to edit the name. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. 5. Press SAVE to save the entry. There is a confirmation tone and the screen shows Saved. Using the telephone base:
1. Enter the telephone number when in idle mode, and then press SAVE to move on to edit the number and then press NEXT. 2. Press CID, DIR, /RECORD or /DELETE to highlight one of the following types:
Home Cell Work Other 3. Press NEXT. The screen displays ENTER NAME. 4. Use the dialing keys to edit the name. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a character. Press and hold /DELETE to erase all characters. 5. Press SAVE to save the entry. There is a confirmation tone and the screen shows Saved. 89 Directory Review the directory
-OR-
Review directory entries Using a cordless handset:
1. Press DIR when in idle mode. 2. Press CID or DIR to highlight a directory, and then press REVIEW. 3. Press CID or DIR to browse. 1. Press MENU when in idle mode. 2. Press CID or DIR to highlight Directory, and then press SELECT. 3. Press CID or DIR to highlight a directory, and then press REVIEW. 4. Press CID or DIR to browse. 1. Press OPTION while on a call. 2. Press CID or DIR to highlight Directory, and then press SELECT. 3. Press CID or DIR to highlight a directory, and then press REVIEW. 4. Press CID or DIR to browse.
-OR-
90 Directory Review the directory Using the telephone base:
1. Press DIR when in idle mode. 2. Press CID, DIR, /RECORD or /DELETE to highlight a directory, and then press REVIEW.
-OR-
3. Press CID, DIR, /RECORD or /DELETE to browse. 1. Press MENU when in idle mode. 2. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight a directory, and then press REVIEW.
-OR-
4. Press CID, DIR, /RECORD or /DELETE to browse. 1. Press OPTION while on a call. 2. Press CID, DIR, /RECORD or /DELETE to highlight Directory, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight a directory, and then press REVIEW. 4. Press CID, DIR, /RECORD or /DELETE to browse. NOTES:
When the desired entry displays, press # (pound key) on the handset or telephone base repeatedly to show different dialing options. Directory empty appears if there are no directory entries. 91 Directory Search the directory 3-character alphabetical search You can use the enhanced 3-character search to find your contacts quickly and efficiently. Using a cordless handset or the telephone base:
1. Follow the steps in Review directory entries on the previous page to enter the directory. 2. When an entry appears, use the dialing keys to enter the letters associated with the name (see page 88). You can enter up to 3 letters for the search. The letters will show at the top left hand corner of the screen. After you have entered one to three letters, the system starts searching in the directory. If there is no name matching the letter(s) entered, the next closest match in alphabetical order appears. If necessary, press CID or DIR on the cordless handset, or CID, DIR, /RECORD or /DELETE on the telephone base to browse. NOTE: The cursor automatically moves to the next position 2 seconds after you enter a letter. If you do not enter another letter in the coming 2 seconds, the system starts searching in the directory. 92 Directory Dial, edit or delete a directory entry Dial a directory entry You can dial a directory entry on any line. To dial a directory entry:
1. Search for the desired entry in the directory (see Review directory entries and 3-character alphabetical search on pages 90-92). 2. When the desired entry appears, press # (pound key) repeatedly on the handset or telephone base to show different dialing options. 888-883-2445 1-888-883-2445 883-2445 1-883-2445 3. When the displayed number is in the correct format, press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER on the handset, or 1 LINE, 2 LINE, SPEAKER on the telephone base, or lift the corded handset to use line 1 or line 2. Press CELL A or CELL B on the handset or CELL A or CELL B on the telephone base to use the cell line. Edit a directory entry You can edit any directory entry. However, be aware that if you download a directory from a cell phone again, the directory is erased and replaced with the current cell phone directory. If you have edited the downloaded entries on the TL86103, those changes are lost. To avoid losing changes made to the downloaded directory, we suggest that you edit numbers in your cell phone, and then download the directory. Using a cordless handset:
1. Search for the desired entry in the directory (see Review directory entries and 3-character alphabetical search on pages 90-92). 2. When a directory entry displays, press EDIT. The screen shows EDIT NUMBER along with the phone number to be edited. 3. Use the dialing keys to edit the number:
Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press and hold REDIAL/PAUSE to add a dialing pause (a p appears). 4. Press NEXT. 5. Press CID or DIR to highlight one of the following types. Home Cell Work Other 6. Press NEXT. The screen displays EDIT NAME. 93 Directory Dial, edit or delete a directory entry 7. Use the dialing keys to edit the name. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. 8. Press SAVE to save the entry. There is a confirmation tone and the screen shows Saved. Using the telephone base:
1. Search for the desired entry in the directory (see Review directory entries and 3-character alphabetical search on pages 90-92). 2. When a directory entry displays, press EDIT. The screen shows EDIT NUMBER along with the phone number to be edited. 3. Use the dialing keys to edit the number:
Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a digit. Press and hold /DELETE to erase all digits. Press and hold REDIAL/PAUSE to add a dialing pause (a p appears). 4. Press NEXT. 5. Press CID, DIR, /RECORD or /DELETE to highlight one of the following types. Home Cell Work Other 6. Press NEXT. The screen displays EDIT NAME. 7. Use the dialing keys to edit the name. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a character. Press and hold /DELETE to erase all characters. 8. Press SAVE to save the entry. There is a confirmation tone and the screen shows Saved. 94 Directory Dial, edit or delete a directory entry Edit the type of a directory entry If you only want to edit the type of a directory entry:
1. Search for the desired entry in the directory (see Review directory entries and 3-character alphabetical search on pages 90-92). 2. When a directory entry displays, press LABEL on a handset or TONE on the telephone base. 3. Enter the corresponding shortcut keys shown in the below table. Press 1 2 3 4 Type Home Cell Work Other
-OR-
Press CLEAR to erase the assigned label. Delete a directory entry Using a cordless handset or the telephone base:
1. Search for the desired entry in the directory (see Review directory entries and 3-character alphabetical search on pages 90-92). 2. When the desired entry appears, press MUTE/DELETE on the handset, or
/DELETE or DELETE on the telephone base. The screen displays Delete contact? and the name of the entry. Press YES to confirm. 3. The screen displays Contact deleted and then the next alphabetical entry in the directory. You hear a confirmation tone. NOTE: Once a directory entry is deleted, it cannot not be retrieved. 95 Directory Dial, edit or delete a directory entry Remove a downloaded directory Using a cordless handset:
1. Search for the desired downloaded directory in the directory menu (see Review directory entries and 3-character alphabetical search on pages 82-83). When the desired downloaded directory is chosen, press OPTION , and then press CID or DIR to highlight Remove dir. Press SELECT . The screen displays Directory Cell Phone A will be erased. Press YES to confirm. The screen displays Erasing directory... You hear a confirmation tone. Using the telephone base:
1. Search for the desired downloaded directory in the directory menu (see Review directory entries and 3-character alphabetical search on pages 82-83). When the desired downloaded directory is chosen, press OPTION , and then press CID, DIR, /RECORD or /DELETE to highlight Remove dir. Press SELECT . The screen displays Directory Cell Phone A will be erased. Press YES to confirm. You hear a confirmation tone. 2. 3. 4. 2. 3. 4. 96 Caller ID About caller ID This product supports caller ID services offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Information about caller ID with call waiting Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call. It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:
You have both caller ID and call waiting, but as separate services (you may need to combine these services). You have only caller ID service, or only call waiting service. You dont subscribe to caller ID or call waiting services. There are fees for caller ID services. In addition, services may not be available in all areas. This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date, along with the call information, are from the telephone service provider. Caller ID information may not be available for every incoming call. Callers may intentionally block their names and/or telephone numbers. You can only view a maximum of 15 digits of every caller ID log entry. NOTE: You can use this product with regular caller ID service, or you can use this products other features without subscribing to caller ID or combined caller ID with call waiting service. 97 Caller ID Caller ID log How the caller ID log works The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to the telephone base and all handsets, so changes made using any handset or the telephone base are reflected in all other devices. If you answer a call before the information appears on the screen, it does not show in the caller ID log. NOTE: Each entry may have up to 24 digits for the phone number and 15 characters for the name. Missed (new) call indicator When a handset or the telephone base is in idle mode and has new or missed calls, its screen shows XX Missed calls. If there are more than 99 missed calls, the handset screen will show XXX Missed calls. All new and missed entries are counted as missed calls. Each time you review a new caller ID log entry (indicated by NEW on the screen), the number of missed calls decreases by one. If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold OFF/CANCEL on the handset for four seconds when the handset is idle, or press and hold CANCEL on the telephone base for four seconds when the telephone base is idle. You will hear a confirmation tone. All the entries in the caller ID log become old (reviewed already), and the missed calls message goes away. Memory match If the incoming telephone number matches the last 7 digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory. NOTE: The number shown in the caller ID log will be in the format sent by the telephone service provider. The telephone service provider usually delivers ten-digit phone numbers
(area code plus telephone number). If the telephone number of the caller does not match a number in your directory, the name will appear as it is delivered by the telephone service provider. 98 Caller ID Caller ID operation Review the caller ID log Review the caller ID log to find out who called, to return the call, or to copy the callers name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log. Using a cordless handset or the telephone base:
1. When a handset or the telephone base is in idle mode, press CID on the handset or on the telephone base to review the caller ID log in reverse chronological order starting with the most recent call.
-OR-
Review the caller ID log by pressing MENU. CID Press CID or DIR on the handset or CID, DIR,
/RECORD or /DELETE on the telephone base to highlight Caller ID log, and then press SELECT twice to select Review. 2. Press CID or DIR on the handset or CID, DIR,
/RECORD or /DELETE on the telephone base to scroll through the list. CALLER ID NOTE: Only one handset or the telephone base can review the caller ID log at a time. If another device tries to enter the directory or caller ID log, it shows Not available at this time. Line source of the call Callers name Callers number Time of call NEW CHARLIE JOHNSON 888-883-2445 5:32am 8/06 BACK SA8VE SAVE Line source of the call Appears if it is a new or missed call. Date of call Callers name Callers number Time of call NEW CHARLIE JOHNSON 888-883-2445 5:32am 8/06 BACK SAVE Appears if it is a new or missed call. Date of call 99 Caller ID Caller ID operation View dialing options Although the incoming caller ID log entries have ten digits (the area code plus the seven-digit number), in some areas, you may need to dial only the 7 digits, 1 plus the seven digits, or 1 plus the area code plus the seven digits. You can change and store the number of digits that you dial in the caller ID log. While reviewing the caller ID log, press # (pound key) repeatedly to show different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory. Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory. When the number is in the correct format for dialing. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER on a cordless handset, or press 1 LINE, 2 LINE, or SPEAKER on the on the telephone base, or lift the corded handset to call the number using line 1 or line 2.
-OR-
Press CELL A or CELL B on a cordless handset or CELL A or CELL B on the telephone base to call the number using the cell line. 888-883-2445 1-888-883-2445 883-2445 1-883-2445 Press #
(pound key) 888-883-2445 1-888-883-2445 883-2445 1-883-2445 Press 1 Dial a caller ID log entry Using a cordless handset or the telephone base:
1. When in the caller ID log, press CID or DIR on the handset, or CID, DIR, /RECORD or /DELETE, on the telephone base to browse. 2. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER on the handset, or 1 LINE, 2 LINE or SPEAKER on the telephone base, or lift the corded handset to dial the displayed entry using line 1 or line 2.
-OR-
Press CELL A or CELL B on the handset or CELL A or CELL B on the telephone base to dial the display entry using the cell line. 100 Caller ID Caller ID operation Save a caller ID log entry to the directory Caller ID log entries can only be saved to the Home directory. Using a cordless handset:
1. Select a desired entry in the caller ID log (see Review the caller ID log on page 99). 2. When the desired entry appears, press # (pound key) repeatedly to show different dialing options. 3. When the number is in correct format, press SAVE. The screen displays EDIT NUMBER. 4. Use the dialing keys to edit the number. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to backspace and erase a digit. Press and hold MUTE/DELETE to erase the entire entry. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). 5. Press NEXT. 6. Press CID or DIR to highlight one of the following types:
Home Cell Work Other 7. Press NEXT. The handset displays EDIT NAME. 8. Use the dialing keys (page 80) to edit the name. Press CID or DIR to move the cursor to the left or right. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key). 9. Press SAVE to confirm. The screen shows Saved. 101 Caller ID Caller ID operation Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on page 99). 2. When the desired entry appears, press # (pound key) repeatedly to show different dialing options. 3. When the number is in correct format, press SAVE. The telephone base displays EDIT NUMBER. 4. Use the dialing keys to edit the number. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to backspace and erase a digit. Press and hold /DELETE to erase the entire entry. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). 5. Press NEXT. 6. Press CID, DIR, /RECORD or /DELETE to highlight one of the following types:
Home Cell Work Other 7. Press NEXT. The telephone base displays EDIT NAME. 8. Use the dialing keys (page 80) to edit the name. Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right. Press /DELETE to erase a character. Press and hold /DELETE to erase all characters. Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key). 9. Press SAVE to confirm. The telephone base shows Saved. NOTES:
If the callers name you received from the telephone service provider is all in capital letters, the first letter of every word remains a capital letter, while other letters become lowercase. However, the next letter after the prefix Mac, Mc, D, C or O, is kept as a capital letter. For example, the D in MacDonald is kept as a capital letter. Another exception is that VAN DER will be changed to Van der. If the telephone number from the caller ID information has already been saved in the directory under a different name, the new name will overwrite the old one. 102 Caller ID Caller ID operation Delete caller ID log entries To delete an entry:
Using a cordless handset:
Press MUTE/DELETE on the handset. Using the telephone base:
Press /DELETE or DELETE the telephone base to delete the shown entry. To delete all entries:
Using a cordless handset:
1. Press MENU when in idle mode. 2. Press CID or DIR to highlight Caller ID log, and then press SELECT. 3. Press CID or DIR to highlight Delete all calls, and then press SELECT. 4. When the screen shows Delete all calls?, press YES to confirm. There is a confirmation tone and the screen returns to the previous menu. Using the telephone base:
1. Press MENU when in idle mode. 2. Press CID, DIR, /RECORD or /DELETE to highlight Caller ID log, and then press SELECT. 3. Press CID, DIR, /RECORD or /DELETE to highlight Delete all calls, and then press SELECT. 4. When the screen shows Delete all calls?, press YES to confirm. There is a confirmation tone and the screen returns to the previous menu. 103 Caller ID Reasons for missing caller ID information There are occasions when other information or no information shows for various reasons:
On-screen message PRIVATE NUMBER The caller prefers not to show the phone number. Reason PRIVATE NAME The caller prefers not to show the name. PRIVATE CALLER The caller prefers not to show the phone number and name. UNKNOWN NUMBER Your telephone service provider cannot determine the callers number. UNKNOWN NAME UNKNOWN CALLER Your telephone service provider cannot determine the callers name. Your telephone service provider cannot determine the callers name and telephone number. Calls from other countries may also generate this message. 104 Answering system Answering system settings Use the answering system menu of the telephone base to set up the announcement message, turn the answering system or message alert tone on or off, activate call screening, or change the number of rings, remote access code or message recording time. If you turn off the answering system and you change any setting in the answering system setup menu, the answering system automatically turns on again. Announcement Your outgoing announcement plays when calls are answered by the answering system. The telephone has a default outgoing announcement, Hello, please leave a message after the tone. You can use this default announcement, or record your own. You can record an announcement up to 90 seconds. The system does not record any announcement shorter than two seconds. To play a new outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press SELECT again to select Announcement. 5. Press SELECT to select Play annc, and then press SELECT. ANSWERING SYSTEM Announcement Delete all old Record memo BACK
SELECT Playing announcement RECORD
STOP 105 Answering system Answering system settings To record a new outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. Recording announcement STOP 4. Press SELECT again to select Announcement. 5. Press SELECT to select Record annc. The system announces, Record after the tone. Press STOP when you are done. 6. Speak towards the telephone base to record your announcement. Press STOP to end recording. Your recorded announcement plays.
-OR-
1. When the telephone base is in idle mode, press /RECORD. 2. Press CID, DIR, /RECORD or /DELETE to highlight Announcement, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT.The system announces, Record after the tone. Press STOP when you are done. 4. Speak towards the telephone base to record your announcement. Press STOP to end recording. Your recorded announcement plays. To listen to the recorded announcement again, scroll to Play annc and press SELECT. 106 Answering system Answering system settings To delete or reset your outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press SELECT again to select Announcement. 5. Press CID, DIR, /RECORD or /DELETE to highlight Play annc, and then press SELECT.. 6. While the announcement is playing, press /DELETE to delete the announcement. The system announces Announcement deleted and the screen shows Annc. Reset.
-OR-
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to Reset to default annc?
NO YES Announcement reset to default highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press SELECT again to select Announcement. 5. Press CID, DIR, /RECORD or /DELETE to highlight Reset annc, and then press SELECT. The screen shows Reset to default annc?
6. Press YES to confirm. The system announces Announcement deleted and the screen shows Announcement reset to default. When your announcement is deleted, the system answers calls with the default announcement described on page 105. You cannot delete the default announcement. 107 Answering system Answering system settings Answer on/off Unless you change it, the answering system is on and ready to record messages. You can turn the answering system off, but if you do so, the answering system does not answer calls and record incoming messages. To turn the answering system on or off:
Using the telephone base:
Press /LINE 1 ANS ON/OFF or /LINE 2 ANS ON/OFF to turn the corresponding answering system on or off. If the answering system is turned on, it announces, Calls will be answered. If the answering system is turned off, it announces, Calls will not be answered.
-OR-
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Answer ON/OFF, and then press SELECT. 5. Press CID, DIR, /RECORD or /DELETE to highlight On or Off, and then press SELECT to save the setting. You hear a confirmation tone. Play messages Answering system Directory Caller ID log BACK SELECT ANSWERING SYSTEM Delete all old Record memo Answer ON/OFF BACK SELECT ANSWER ON/OFF On Off BACK SELECT NOTE: If the answering system is off and there is an incoming call, the system answers after ten rings and announces, Please enter your remote access code. For more information about remote access, see page 122. 108 Answering system Answering system settings Call screening Use this feature to choose whether incoming messages can be heard over the speaker when they are being recorded. If you turn call screening on, you hear the incoming message. While monitoring an incoming message, you can answer the call by pressing LINE 1/FLASH, LINE 2/FLASH or /SPEAKER on the handset, or pressing 1 LINE, 2 LINE or SPEAKER corded handset to answer the incoming call. To change the setting:
Using the telephone base:
on the telephone base, or lift the 1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT.. 4. Press CID, DIR, /RECORD or /DELETE to highlight Ans system setup, and then press SELECT. 5. Press SELECT to select Call screening. 6. Press CID, DIR, /RECORD or /DELETE to choose On ANS SYSTEM SETUP Call screening
# of rings Remote code BACK SELECT CALL SCREENING
On Off BACK SELECT or Off. 7. Press SELECT to save the setting. You hear a confirmation tone. NOTE: For more information on call screening, see page 116. 109 Answering system Answering system settings Number of rings You can set the answering system to answer an incoming call after two, three, four, five or six rings. You can also select toll saver. If toll saver is selected, the answering system answers a call after two rings when you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges when calling from out of your local area. By default, the answering system answers an incoming call after four rings. To set the number of rings:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. ANS SYSTEM SETUP Call screening
# of rings Remote code BACK SELECT 3. Press CID, DIR, /RECORD or /DELETE to highlight
# OF RINGS Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Ans system setup, and then press SELECT. 6 5
4 BACK SELECT 5. Press CID, DIR, /RECORD or /DELETE to highlight # of rings, and then press SELECT. 6. Press CID, DIR, /RECORD or /DELETE to choose among 2, 3, 4, 5, 6 or Toll saver. 7. Press SELECT to save the setting. You hear a confirmation tone. NOTE: If you set the number of rings for the answering system as 2 or 3 rings, the caller ID announce feature may not have enough time to announce the callers full information. 110 Answering system Answering system settings Remote access code To access your answering system remotely from any touch-tone phone, you need to enter a two-digit number (00-99). By default, the remote access code is 19. Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Ans system setup, and then press SELECT. 5. Press CID, DIR, /RECORD or /DELETE to highlight Remote code, and then press SELECT. ANS SYSTEM SETUP Call screening
# of rings Remote code BACK SELECT REMOTE CODE 19 BACK SAVE 6. Use the dialing keys to enter a two-digit number. Press /DELETE to backspace and delete a digit. 7. Press SAVE to save the setting. You hear a confirmation tone. 111 Answering system Answering system settings Message alert tone When the message alert tone is set to On, and there is at least one new message, the telephone base beeps every ten seconds. Unless you change it, the message alert tone is set to off. There is no audible alert at the handset. To change the setting:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Ans system setup, and then press SELECT. ANS SYSTEM SETUP
# of rings Remote code Msg alert tone BACK SELECT MSG ALERT TONE
On Off BACK SELECT 5. Press CID, DIR, /RECORD or /DELETE to highlight Msg alert tone, and then press SELECT. 6. Press CID, DIR, /RECORD or /DELETE to choose On or Off. 7. Press SELECT to save the setting. You hear a confirmation tone. NOTES:
The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages. To temporarily turn off the message alert tone, see page 115. 112 Answering system Answering system settings Message recording time You can set the recording time allowed for incoming messages. The message length is three minutes by default. To change the setting:
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT .. ANS SYSTEM SETUP Remote code Msg alert tone Recording time BACK SELECT 3. Press CID, DIR, /RECORD or /DELETE to highlight RECORDING TIME Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Ans system setup, and then press SELECT. 5. Press CID, DIR, /RECORD or /DELETE to highlight Recording time, and then press SELECT.
3 minutes 2 minutes 1 minute BACK SELECT 6. Press CID, DIR, /RECORD or /DELETE to choose 3 minutes, 2 minutes or 1 minute, and then press SELECT to save the setting. You hear a confirma-
tion tone. 113 Answering system About the answering system Answering system and voicemail indicators Your telephone has separate indicators for two different types of voice messages: those recorded on its built-in answering system and those recorded in your service providers voicemail (fees may apply). Your telephones built-in answering system messages and voicemail messages are separate. Each alerts you to new messages differently. and L1) XX New msgs and/or L2) XX New msgs display on the If telephone base and handsets, there are new messages in the built-in answering system. To listen to messages recorded on your digital answering system, press
/LINE 2 MAIL BOX on the telephone base. To listen to messages with a handset, see To listen to messages on a cordless handset on page 117. If telephone base and handsets, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN.
, and L1) Voicemail and/or L2) Voicemail display on
/LINE 1 MAIL BOX or
, or
, Some service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider. To use your voicemail service rather than your answering system, turn off your answering system. To use your answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. Using the answering system and voicemail together You can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers as described below. To learn how to program your voicemail settings, contact your telephone service provider. Then, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting. 114 Answering system About the answering system Message capacity The answering system can record and store up to 99 messages. Each message can be up to 3 minutes in length depending on the message length set. The total storage capacity for the announcement, messages and memos is approximately 14 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them. When there are new messages (including memos) on the answering system, the number of messages stored shows in the message counter. If the answering system has less than three minutes of recording time left, it announces, Less than three minutes to record, before message playback at the handset or the telephone base. L1) Rec mem low and/or L2) Rec mem low displays on the device screen in idle mode. When you turn on the answering system at the telephone base, it announces, Calls will be answered. Less than three minutes to record. If the memory is full, the answering system announces, Memory is full, before message playback. The device screen displays L1) Rec mem full and/or L2) Rec mem full in idle mode. Once the memory is full, you cannot turn the answering system back on if it has been turned off, nor can you record new messages until old ones have been deleted. Memory full displays if you want to turn on the answering system on the handset but there is no memory. Voice prompts The system provides voice prompts to guide you through the setup procedures at the telephone base, message playback, remote access and recording outgoing announcements. Temporarily turning off the message alert tone If the message alert tone is turned on, the telephone base beeps every ten seconds when there are new messages. Pressing any telephone base key temporarily silences the message alert tone. The message alert tone resumes when you receive another message. 115 Answering system About the answering system Call screening To screen a call at the telephone base:
If the answering system and call screening are on (see Call screening on page 109), the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system. Options while a message is being recorded:
/LINE 1 MAIL BOX, Press /VOLUME/ on the telephone base to adjust the call screening volume. Press temporarily silence the call screening. Press temporarily turn on the call screening if call screening is set to off. Press 1 LINE, 2 LINE, SPEAKER call.
/LINE 1 MAIL BOX,
/LINE 2 MAIL BOX or SCREEN to
/LINE 2 MAIL BOX or SILENCE to
, or lift the corded handset to answer the To screen a call at the handset:
If the answering system is on and your answering system is recording a message, press SCREEN to screen the call on your handset and the screen displays the caller ID information. If you do not subscribe to caller ID service, the handset shows Incoming call. Options while a message is being recorded:
Press CID/VOLUME or DIR/VOLUME on the handset to adjust the call screening volume. Press OFF/CANCEL or SILENCE to temporarily silence the call screening. Press SCREEN to temporarily turn on the call screening if call screening is set to off. Press /SPEAKER through the speakerphone. Press again to turn off the speakerphone. SPEAKER to broadcast the announcement and the incoming message Call intercept When a caller is leaving a message on your answering system, you can stop recording and talk to the caller by pressing the corresponding line button LINE 1/FLASH or LINE 2/FLASH, or /SPEAKER on the handset. You can also press the corresponding line button 1 LINE or 2 LINE, or SPEAKER on the telephone base; or lift the corded handset. 116 Answering system Message playback If you have both new and old messages, you can play either new or old messages. The caller ID information displays on the screens when you play messages and you can call back the caller. When playback begins, the handset and telephone base screens display the message status, caller ID information, and time and date of the message recorded. You hear the total number of messages followed by the day and time of the message. After the last message, the telephone announces, End of messages. and the screen displays End of messages. To listen to messages at the telephone base:
1. Press
/LINE 2 MAIL BOX on the telephone base
/LINE 1 MAIL BOX or to listen to the messages. If there are new and old messages, news messages will play automatically. If there are only new or only old messages, they will play automatically. When the handset is playing a message, its screen shows [2]-Call info and the callers name or number. If the callers information is unavailable, the handset shows No caller info. The system announces the number of messages, and then begins playback. The message sequence is shown on the telephone base. If there are no recorded messages, the telephone base shows No messages and you hear, You have no message. To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU to enter the main menu. 2. Press SELECT to select Play messages. 3. Press CID or DIR to highlight Mailbox 1 or Mailbox 2, and then press SELECT. If there are new and old messages, press CID or DIR to select Play new msgs or Play old msgs, and then press SELECT. If there are only new or only old messages, they will play automatically. The system announces the number of messages, and then begins playback. The message sequence is shown on the handset. If there are no recorded messages, the handset shows No messages and you hear, You have no messages. 117 Answering system Message playback Options during playback When a message is playing, you can adjust the playback volume, skip, repeat, pause or delete the message. When messages are playing on the telephone base:
Press /VOLUME/ to adjust the speaker volume. Press /SKIP or SKIP to skip to the next message. Press /REPEAT or REPEAT to repeat the message currently playing. Press /REPEAT or REPEAT twice to listen to the previous message. Press /DELETE to delete the current message. The system advances to the next message. Press 2 to pause the playback and show the caller ID information. Press 1 LINE, 2 LINE, SPEAKER or CALL to use line 1 or line 2, or press Cell A or Cell B to use the cell line to call back the caller. If necessary, press QUIET # (pound key) or 1 to show different dialing options. Press CANCEL or BACK to restart the playback. If you do not call back within 10 seconds, message playback restarts. Press 1 LINE, 2 LINE, Cell A or Cell B to pause the message playback. The telephone base screen displays Call back? with the caller ID information. If the dialing format used is not correct, press QUIET # (pound key) or 1 to show different dialing options. Press CALL to call back the caller, or BACK to restart the message playback. If the dialing format used is not correct, and then use the option above to choose the correct format before calling back the caller.
/LINE 1 MAIL BOX, Press playback.
/LINE 2 MAIL BOX or CANCEL to stop the 118 Answering system Message playback When messages are playing on a cordless handset:
Press /SPEAKER to play the messages through the handset earpiece. Press /SPEAKER again to return to playing messages through the speakerphone. Press CID/VOLUME or DIR/VOLUME to adjust the speakerphone volume. Press SKIP to skip to the next message. Press REPEAT to repeat the message currently playing. Press REPEAT twice to listen to the previous message. Press DELETE to delete the current message. Press 2 to pause the playback and show the caller ID information. Press LINE 1/FLASH, LINE 2/FLASH, /SPEAKER or CALL to use line 1 or line 2, or press A Cell or B Cell to use the cell line to call back the caller. If necessary, press # (pound key) or 1 to show different dialing options. Press OFF/CANCEL or BACK to restart the playback. If you do not call back within 10 seconds, message playback restarts. Press LINE 1/FLASH, LINE 2/FLASH, A Cell or B Cell to pause the message playback. The handset displays Call back? with the caller ID information. If the dialing format used is not correct, press QUIET # (pound key) or 1 to show different dialing options. Press CALL to call back the caller, or BACK to restart the message playback. If the dialing format used is not correct, and then use the option above to choose the correct format before calling back the caller. Press OFF/CANCEL to stop the playback. 119 Answering system Message playback Delete all old messages You can only delete old (reviewed) messages. You cannot delete new messages until you review them. You cannot retrieve deleted messages. To delete all old messages on the telephone base:
1. When the telephone is idle, press /DELETE. 2. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. The screen shows Delete all old messages?
3. Press YES to confirm. The screen displays Deleting then All old msgs deleted! You hear a confirmation tone.
-OR-
1. Press MENU when in idle mode to enter the main menu. 2. Press CID, DIR, /RECORD or /DELETE to highlight Answering system, and then press SELECT . 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to highlight Delete all old, and then press SELECT. The screen shows Delete all old messages?
5. Press YES to confirm. The screen displays Deleting then All old msgs deleted! You hear a confirmation tone. 120 Answering system Recording and playing memos Memos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using the telephone base. Play and delete them the same way as incoming messages. Record a memo Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the main menu. 2. Press /DELETE to highlight Answering system, and then press SELECT . 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT. 4. Press CID, DIR, /RECORD or /DELETE to high-
light Record memo, and then press SELECT. The system announces, Record after the tone. Press STOP when you are done. ANSWERING SYSTEM Announcement Delete all old Record memo BACK SELECT Recording memo STOP 5. Speak towards the handset to record a memo. 6. Press STOP to stop recording. The systems announces, Recorded. and the returns to the previous menu.
-OR-
1. When the telephone base is in idle mode, press /RECORD. 2. Press CID, DIR, /RECORD or /DELETE to highlight Memo, and then press SELECT .. 3. Press CID, DIR, /RECORD or /DELETE to highlight Mailbox 1 or Mailbox 2, and then press SELECT.The system announces, Record after the tone. Press STOP when you are done. 4. Speak towards the handset to record a memo. 5. Press STOP to stop recording. The systems announces, Recorded. and the returns to the previous menu. NOTES:
The system announces Memory is full, if you attempt to record a memo when the memory is full. Each memo can be up to four minutes in length. Memos shorter than two seconds are not recorded. Playback a memo Play memos the same way as messages. See Message playback on pages page 117-120. 121 Answering system Remote access You can reach your answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system 1. 2. Dial your telephone number from any touch-tone telephone. When the system plays your announcement, enter the two-digit remote access code (19 is the default code, see page 111 to change it). The system automatically announces the number of new or old messages (if any), and then begins to play them. You can also enter the following remote commands. Remote commands 3. 1 2 3 33 4 44 5
*5 6
*7 8 0 Press to listen to all messages. Press to listen to new messages only. Press to delete the current message (during playback). Press twice to delete all old messages. Press to repeat the current message (during playback). Press twice to listen to the previous message. Press to stop. Press to listen to a list of remote commands. Press to skip to the next message (during playback). Press to record a new announcement. Press to hang up the call. Press to turn the answering system on or off. 4. Hang up or press 8 to end the call. 122 Answering system Remote access Cut out and carry the remote access wallet card at the back of this users manual for quick reference. NOTES:
If you do not press any keys after you enter the remote access code, all new messages play. If there are no new messages, all old messages play. Once the new messages have played, the telephone announces the help menu options. If you do not press any key within 20 seconds, the remote access call automatically disconnects. When the answering system is turned off, the telephone answers after 10 rings, and announces, Please enter your remote access code. When the memory is full, the answering system answers incoming calls after 10 rings and announces, Memory is full. Enter the remote access code. 123 Appendix Adding and registering cordless handsets/headsets/
wireless speakers Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model TL86003, sold separately), or up to ten cordless handsets and two DECT cordless headsets and wireless speakers (sold separately). Visit www.telephones.att.com/headsets for a list of compatible DECT 6.0 cordless headsets. Each new handset, headset or wireless speaker must be registered to the telephone base before use. You must register each handset, headset or wireless speaker separately. To register a cordless headset to this telephone system, please refer to the users manual of the cordless headset for more details. To register a cordless handset, see below. The handsets provided within your product box are already registered as HANDSET 1 and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12). Register a cordless handset to your telephone base Using the telephone base:
1. 2. 3. 4. 5. 6. Please wait Registering... Before you begin registration, make sure the handset is out of the charger and shows To register, see user manual. Press MENU on the telephone base in idle mode. Press CID, DIR, /RECORD or /DELETE to highlight Settings, and then press SELECT . Press CID, DIR, /RECORD or /DELETE to highlight Registration, and then press SELECT . The telephone base shows Registering... Please wait. Press # on the cordless handset for registration, and the handset shows Registering... Please wait. It takes about 90 seconds to complete the registration process. Both the telephone base and cordless handset display HANDSET X Registered (X represents the registered handset number), and beep when registration completes. Registering... Please wait BACK If registration fails, the system will automatically try to register again. If registration fails after the third try, the handset displays Registration failed, and then To register, see user manual. This may take up five minutes to occur. Please start again from Step 1 above. NOTE: You cannot register a handset if any other system handset is in use. 124 Appendix Deregister cordless handsets You may need to deregister your handsets if:
You have 12 registered handsets and need to replace a handset.
-OR-
You wish to reassign the designated handset number of your registered handsets. You must first deregister ALL handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the instructions on this page before beginning the deregistration process. 2. 3. 4. Deregister all cordless handsets from the telephone base 1. Make sure that all handsets are out of the charger before you begin deregistration. Press and hold HOLD on the telephone base for about 10 seconds. The telephone base shows Deregister all devices? Release HOLD. Quickly press HOLD again or press YES within 5 seconds. If the telephone base returns to the idle screen, start again with Step 1 above. The telephone base shows Deregistered all devices and then returns to the idle screen. All system handsets show To register, see user manual and you hear a confirmation tone when the deregistration completes. The deregistration process takes about 10 seconds to complete. After deregistering, register each handset again individually following the registrations on the previous page. Deregister all devices?
YES NO NOTES:
If the deregistration process fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handsets if any other system handset is in use. 125 Appendix Alert tones and lights Handset screen icons Line 1 or Line 2 - On steadily when line 1 and/or line 2 is in use or there is an incoming call on line 1 and/or line 2. CELL A or Cell B- On steadily when Cell A line and/or Cell B line is in use or there is an incoming call on Cell A line and/or Cell B line. Bluetooth connected devices - There are Bluetooth connected devices on the active devices list. Bluetooth disconnected devices - There are Bluetooth disconnected devices on the active devices list. Wireless Bluetooth headset - On steadily when a wireless Bluetooth headset is in use on line 1 or line 2. Battery status - Battery is charging (animated display). Battery status - The battery icon flashes when the battery is low and needs charging. Speakerphone - The speakerphone is in use. New voicemail - You have new voicemail on line 1 and/or line 2 from your telephone service provider. Message - New message in the built-in answering system. ECO mode - Activates automatically to reduce power consumption when the handset is within range from the telephone base. New caller ID log - New and missed calls. MUTE - The handset microphone is off. Ringer off - The handset ringer is off. NO INCOMING PTT - The incoming PTT function on the handset is off. PC CALL ringer off - The handset ringer for PC call is off. A B A B A B
A
B 2 ECO NEW MUTE
PTT PC 126 Appendix Alert tones and lights Telephone base screen icons LINE 1 or LINE 2 - On steadily when line 1 and/or line 2 is in use or there is an incoming call on line 1 and/or line 2. CELL A or Cell B- On steadily when Cell A line and/or Cell B line is in use or there is an incoming call on Cell A line and/or Cell B line. Bluetooth connected devices - There are Bluetooth connected devices on the active devices list. Bluetooth disconnected devices - There are Bluetooth disconnected devices on the active devices list. Wireless Bluetooth headset - On steadily when a wireless Bluetooth headset is in use on line 1 or line 2. New voicemail - You have new voicemail on line 1 and/or line 2 from your telephone service provider. New answering system message - New message in the answering system. New caller ID log - Missed and new calls. Mute - Microphone is muted. Directory Search Bar - 3-Character Search Number of missed call - Missed call indication for Home and Cell lines Ringer off - The telephone base ringer is off. NO INCOMING PTT - The incoming PTT function on the telephone base is off. PC CALL ringer off - The telephone base ringer for PC call is off. A B A B A B
A
B 2 NEW MUTE X
PTT PC 127 Appendix Alert tones and lights Handset alert tones One short beep One long beep Two short beeps Confirmation tone
(three rising tones) Four beeps Tone of each key press, if key tone is turned on. Indication to begin recording a message, memo or announcement. You are pressing CID/VOLUME or DIR/VOLUME on a cordless handset when the volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
-OR-
Registration slots are full. The system has completed the command successfully. The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call. Four short beeps Four rising tones Low battery warning. Your Android cell phone has received mobile notifications. 128 Appendix Alert tones and lights Telephone base alert tones One short beep One long beep Two short beeps Confirmation tone
(three rising tones) Four beeps Four short beeps Four rising tones Tone of each key press, if key tone is turned on. Indication to begin recording a message, memo or announcement. Indicates the start of message recording during call screening or the end of a message playback session. You are pressing /VOLUME/ on the telephone base when the volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
-OR-
Registration slots are full. The system has completed the command successfully. The other party has ended your intercom call. Registration failure tone. Your Android cell phone has received mobile notifications. Beeps every ten seconds Message alert. 129 Appendix Alert tones and lights Lights SPEAKER On when the speakerphone is in use.
/LINE 1 ANS ON/OFF/
/LINE 2 ANS ON/OFF On when the answering system is on.
/LINE 1 MAIL BOX/
/LINE2 MAIL BOX On when the answering system is playing recorded messages. Flash when there are new messages. lights CELL A/
CELL B/HEADSET On when the telephone base is paired and connected with a Bluetooth device. Flash alternately while pairing a Bluetooth device. Flash quickly when there is an incoming cell call. 1 LINE/2 LINE On when line 1 or line 2 is in use. Flash quickly when there is an incoming call on line 1 or line 2. Flash slowly when the call on line 1 or line 2 is on hold. CHARGE light On when the handset is charging in the charger. High contrast lighted display Keypad
/SPEAKER SPEAKER On when the speakerphone is on. 130 Appendix Display screen messages Screen messages Answering sys in On during quite mode BASE is calling QUIET mode is turned on. The answering system is automatically turned on. The telephone base is calling. BASE is calling all The telephone base is calling all devices (for intercom calls). Bluetooth system busy Call transferred Caller ID log empty Calling BASE 0 Calling HANDSET X CELL A CELL B You are trying to make a cell call or access the Bluetooth menu when the Bluetooth link is already being used. You have transferred an outside call to another device. There are no entries in the caller ID log. The handset is calling the telephone base (for intercom calls). The handset or telephone base is calling another handset (for intercom calls). The telephone base is transferring an outside call to a handset. Cell A line is on a call. Cell B line is on a call. CL) A:<Application> The cell phone that you paired with this telephone received a mobile notification. Cell A line is being used Message received from Alerts manager that your cell phones battery is low. A call on Cell A line has been put on hold. CL) A Ringer off The ringer of Cell A line is turned off. CL) B:<Application> The cell device that you paired with this telephone received a mobile notification. Cell B line is being used Message received from Alerts manager that your cell devices battery is low. A call on Cell B line has been put on hold. CL) B Ringer off The ringer of Cell B line is turned off. CL) Ringers off The ringers of both cell lines are turned off. CL) A&B In use CL) A&B On hold CL) Downloading Both cell lines are being used. Calls on both cell lines have been put on hold. The system is downloading a directory from a cell phone. CL) Downloading... The system is downloading a directory from a cell phone. Connection failed A Bluetooth device failed to establish a connection with your telephone system. 131 CL) A In use CL) A low batt CL) A On hold CL) B In use CL) B low batt CL) B On hold Appendix Display screen messages Screen messages Contact deleted A directory entry is deleted. Directory empty There are no directory entries. Directory full Ended HANDSET X is calling HANDSET X is calling all The directory is full. You cannot save any new entries unless you delete some current entries. You have just ended a call. Another system handset is calling. The handset is calling all devices. Intercom The device is on an intercom call. Intercom ended The intercom call has just ended. L1) Ans sys off The answering system of line 1 is turned off. L1) In use Line 1 is being used. L1) No line L1) On hold There is no telephone line connection to line 1. A call on line 1 has been put on hold. L1) Rec mem full The system recording time for line 1 is full. L1) Rec mem low The system recording time for line 1 is low. L1) Ringer off The ringer of line 1 is turned off. LI) Voicemail A new voicemail is detected in line 1. L1) XX New msgs L2) Ans sys off Displays on telephone base screen when you have new messages in the answering system of line 1. The answering system of line 2 is turned off. L2) In use Line 2 is being used. L2) No line L2) On hold There is no telephone line connection to line 1. A call on line 2 has been put on hold. L2) Rec mem full The system recording time for line 2 is full. L2) Rec mem low The system recording time for line 2 is low. L2) Ringer off The ringer of line 2 is turned off. L2) Voicemail A new voicemail is detected in line 2. L2) XX New msgs Line 1 Line 2 Displays on telephone base screen when you have new messages in the answering system of line 2. Line 1 is on a call. Line 2 is on a call. Low battery The battery is low. You should charge the battery. 132 Appendix Display screen messages Screen messages Microphone ON Mute is off so the other party can hear your voice. Muted The microphone is off. The other party cannot hear you. No answer. Try again No battery No Bluetooth device is ready for connection. No caller info The device(s) you are trying to transfer a call to is out of range, off hook, or has no power. The handset in the charger has no battery installed. There is no Bluetooth device paired to the telephone system when you press CELL A/CELL B/HEADSET base or handset. on the telephone The caller information is unavailable. No entries found. Download from SIM only ?
No entries found. Download from Phone only ?
No messages There are no entries found when you download a cell phone directory from the cell memory. There are no entries found when you download a cell phone directory from your SIM card. There are no entries found in either the cell or SIM card when you download a cell phone directory from both memories. There are no messages in the answering system. No signal. Call ended. The phone lost connection with the telephone base or did not have a strong enough signal and the phone call ended. Not available at this time Number already saved Out of range OR no power at base Someone else is already using the directory or caller ID log. When a handset tries to access the answering system or Bluetooth menu during battery backup mode. The telephone number you have entered is already in the directory. The telephone base has lost power, or the handset is out of range.
** Paging **
The cordless handset is paged by the telephone base. Paging all devices The telephone base is paging all devices. PC CALL PC line is on a call. PC CALL On hold A call on PC line has been put on hold. Place in charger The battery is very low. The handset should be charged. PTT From HANDSET X To devices:
X One handset has started a PTT session to another handset and telephone base. 133 Appendix Display screen messages Screen messages PTT To HANDSET X PTT To BASE 0 You have started the PTT process with a handset. You have started the PTT process with the telephone base. Push to talk Ended The PTT session is ended. Quiet mode is off QUIET mode is turned off. Registering... Please wait Registeration slots are full The handset is registering to the telephone base. The telephone base has the maximum of 12 handsets registered to it. Registration failed The handset registration is not successful. Ringer muted The ringer is off temporarily while the device is ringing. Saved An entry has been successfully saved in the directory. To register HS, Screen display before handset registration. see manual. Unable to call. Try again You try to join a call when there are already four handsets on that call. You try to make an outside call when another device is transferring a call with the intercom feature. XX Missed calls There are missed calls in the caller ID log. XXX Missed calls There are more than 99 missed calls in the caller ID log. 134 Appendix Troubleshooting If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. I cannot pair my cell phone to the telephone base. Make sure you have cellular coverage. Make sure your cell phone is compatible with your telephone system. Check the Bluetooth compatibility list at www.telephones.att.com/bluetooth. Make sure the Bluetooth function of your cell phone is turned on. See the users manual of your cell phone for more information. Make sure that you set your cell phone to search for devices. If the telephone systems in your cell phone device history list, delete it and try pairing again. Carefully follow the pairing instructions on pages 21-31 and make sure that your cell phone is not connected to any other Bluetooth device. Turn off your cell phone, and then turn it on again. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, and then plug it back in. Repeat the above suggestions. I cannot pair my headset to the telephone base. Make sure that your Bluetooth headset is in discoverable mode when pairing with the telephone base. See the users manual of your headset for more information on how to set your headset to discoverable mode. Make sure your headset is compatible with your telephone system. Check the Bluetooth compatibility list at www.telephones.att.com/bluetooth. Carefully follow the pairing instructions on pages 23-24 and make sure that your headset is not connected to any other Bluetooth device. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, and then plug it back in. Repeat the above suggestions. 135 Appendix Troubleshooting I cannot connect my cell phone with the telephone base. Make sure that the Bluetooth function of your cell phone is turned on. See the users manual of your cell phone for more information. Make sure that your Bluetooth cell phone is not connected to any other Bluetooth device. Turn off your cell phone, and then turn it on again. Make sure that your cell phone is on the active devices list. For some cell phones, you must authorize the TL86103 device in your cell phones Bluetooth feature. See the users manual of your cell phone for more information. Manually connect your cell phone to your telephone system. Refer to the users manual of your cell phone for more information. I cannot connect my headset with the telephone base. Make sure that your Bluetooth headset is not connected to any other Bluetooth device. Make sure that your headset is on the active devices list. I cannot put my headset in discoverable mode. Refer to the users manual of your headset for information on how to set your headset to discoverable mode. Make sure that the headset is not connected to any other Bluetooth device in order to successfully pair and connect to the telephone base. Carefully follow the pairing process on pages 23-24. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, and then plug it back in. Repeat the above suggestions. I dont know how to search for or add new devices on my cell phone. Most cell phones have the Bluetooth feature in the connection or setup menus. Please refer to the users manual of your cell phone. In general, press the menu key on your cell phone, and then look for the Bluetooth menu in the settings or connection menu. In the Bluetooth menu, select the option to search for or add new devices. My cell phone disconnects with the telephone base. Turn off your cell phone, and then turn it on again. Make sure that you are not using your cell phone when on a cell call. 136 Appendix Troubleshooting My cell phone is connected to the telephone base, but I cannot make a cell call. Make sure that your cell phone is not in use when you are trying to make a cell call. For some smartphones, make sure that the cellular function is turned on. Bluetooth system busy appears on the display. Make sure that your cell phone is not in use when connected and on the active devices list. Make sure that your cell phone or headset is not connected to any other Bluetooth device. Your telephone system can only use one Bluetooth device at a time. The PIN on the telephone base does not work. The default PIN is 0000. If you have changed the PIN, it will appear on the telephone base in the pairing process. I cannot hear any audio on my telephone system when on a cell call. Make sure that your cell phones volume is not too low or muted. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, and then plug it back in. Turn off your cell phone, and then turn it on again. I cannot download contacts from my cell phone to my TL86103. Make sure that your cell phone is paired and connected to the base. Make sure you place your cell phone next to the base while downloading. If your cell phone does not support the download, you can send the directory from your cell phone. The system can receive the directory automatically. See the users manual of your cell phone for more information. I see duplicate entries in my downloaded directory. If you see duplicate directory entries, you can delete them manually. Another option is to download again either your SIM card or phone memory, but not both. 137 Appendix Troubleshooting Some of my cell phone contacts were not imported to my TL86103. Try copying the contacts from your SIM card to your cell phone memory first, and then download from your phone memory. If that doesnt work, try copying the contacts from your cell phone memory to your SIM card, and then download from your SIM card. For more information on how to transfer contacts between your SIM card and your phone memory, refer to the users manual of your cell phone. Can the TL86103 help the poor cell phone reception in my house?
If your cell phone has poor reception in your home, the TL86103 cannot improve the reception. However, if you have a location in your house with better reception, you can leave your cell phone in that location while you use TL86103 cell line. In order for this to work, the cell phone must be within 30 feet of the telephone base for optimal performance. The listening volume of my cell call is too loud or quiet. During a cell call, if the listening volume is too loud or quiet, try changing the volume on your cell phone. On some cell phones, changing the volume on the cell phone affects your cell call volume on the TL86103 handset. The phone doesnt play my iPhone ringtone when there is an incoming call. Make sure the operating system of your iPhone is iOS 4.1 or later. Make sure you have turned on the Cell ringer feature (page 32). The iPhone ringtone played is unclear or too loud with noise. The quality of ringtone played on your telephone is subject to individual ringtone characteristics. Try using another iPhone ringtone to test the quality. 138 Appendix Troubleshooting My phone doesnt work at all. Make sure the power cord is securely plugged in. Make sure that the battery connector is securely plugged into the handset. Make sure the telephone line cord is securely and firmly plugged into the telephone base and the telephone wall jack. Charge the battery in the handset for at least 11 hours. For optimum daily performance, return the handset to the telephone base or charger when not in use. If the battery is depleted, charge the handset for at least 30 minutes before you use it. Refer to page 10 for details. Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, and then plug it back in. Allow up to one minute for the handset and telephone base to reset. You may need to purchase a new battery. Please refer to Battery installation and charging (page 13) in this users manual. I cannot get a dial tone. Try all the suggestions above. Move the cordless handset closer to the telephone base. You may have moved out of range. If the previous suggestions do not work, disconnect the telephone base from the telephone jack and connect to a different phone. If there is no dial tone on that phone either, the problem is in your wiring or telephone service. Contact your telephone service provider. Your line cord may be defective. Try installing a new line cord. I cannot dial out. Try all the suggestions above. Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room with less background noise. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). 139 Appendix Troubleshooting During power outage, I put a handset in the charger but the system fails to power up. Make sure the handset you placed in the charger base has enough charge to power up the system. Try removing and re-installing the handsets battery. Place the handset in the charger again. My cordless handset isnt performing normally. Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base. You might have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, and then plug it back in. Allow up to one minute for the handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. Out of range appears on my cordless handset. Ensure you plug the telephone base in properly and the power is on. Move the cordless handset closer to the telephone base. You may have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, and then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. 140 Appendix Troubleshooting The batteries do not hold a charge. If the cordless handset is in the charger and the charge light is not on, refer to The charge light is off (page 143). Charge the battery in the cordless handset for at least ten hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 13 for details. You may need to purchase a new battery. Please refer to Battery installation and charging in this users manual on page 13. I get noise, static, or weak signals even when Im near the telephone base. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 9). The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters. You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Move your phone to a higher location. The phone may have better reception in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). I hear other calls while using my phone. Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider. 141 Appendix Troubleshooting I experience poor sound quality when using the handset speakerphone. For increased sound quality while using the handset speakerphone, place the handset on a flat surface with the dial pad facing up. When using a speakerphone, controllinh background noise in your environment is essential. While you are listening to your party, press MUTE/DELETE to temporarily turn your microphone off. When it is your turn to speak, remember to press MUTE/DELETE again to turn the midrophone on. Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off and audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should terminate speakerphone operation and return to normal handset mode. My cordless handset does not ring when I receive a call. Make sure that the ringer is not off. Refer to Ringer volume on page 32 in this users manual. Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack. Make sure you plug in the power cord securely. The cordless handset may be too far from the telephone base. Charge the battery in the cordless handset for at least ten hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. The layout of your home or office may be limiting the operating range. Try moving the telephone base to another location, preferably to a higher location. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply). Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from electronic devices such as television sets, VCRs, or other cordless telephones. Remove the battery. Install the battery again and place the cordless handset into the telephone base. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. Your line cord may be defective. Try installing a new line cord. 142 Appendix Troubleshooting My calls cut in and out while Im using my cordless handset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or surge protector, plug the phone
(or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Move your telephone base to a higher location. The phone may have better reception when installed in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). The charge light is off. Make sure you plug the power and line cords in correctly and securely. Unplug the electrical power. Wait for 15 seconds, and then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Clean the cordless handset, charger and telephone base charging contacts each month with a pencil eraser or cloth. A blinking CHARGE light is an indication that the battery is not connected to the handset or is missing completely. Ensure that the battery is installed properly. My caller ID isnt working. Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. The caller may be calling from an area that supports caller ID. Both your and your callers telephone service providers must use caller ID compatible equipment. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 9). The filter prevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about DSL filters. 143 Appendix Troubleshooting I cannot retrieve voicemail messages. Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 112). If you subscribe to voicemail service from your telephone service provider, contact your telephone service provider for more information on how to access your voicemail. Ive set my LCD language to Spanish or French and I dont know how to change it back to English. Press MENU on your handset or base in idle mode, and then enter 364# on the handset or base. You hear a confirmation tone. I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesnt work. Make sure your computer is powered on. Make sure your Internet connection is working properly. Make sure that the software is installed and running for your nontraditional telephone service. If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information. Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not fix the problem, do the following
(in the order listed):
1. 2. 3. 4. 5. Disconnect the power to the telephone base. Disconnect the cordless handset battery. Wait a few minutes. Connect power to the telephone base. Remove the battery. Replace the battery and place the cordless handset into the telephone base or charger. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. 6. 144 Appendix Troubleshooting Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords. 145 Appendix Troubleshooting System does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. Incomplete messages. If a caller leaves a very long message, part of it may be lost when the system disconnects the call after the maximum recording time you have set. If the caller pauses for longer than seven seconds, the system stops recording and disconnects the call. If the systems memory becomes full during a message, the system stops recording and disconnects the call. If the callers voice is very soft, the system may stop recording and disconnect the call. Difficulty hearing messages. Press VOLUME/ to increase the telephone base speaker volume. Press /VOLUME to adjust the message playback volume on a handset. System does not answer after the correct number of rings. Make sure the answering system is on. L1) Ans sys off or L2) Ans sys off should not appear on the handset screen and the /LINE 1 ANS ON/OFF or
/LINE 2 ANS ON/OFF light on the telephone base should be on. If toll saver is activated, the number of rings changes to two when you have new messages stored (pages 107). If the memory is full or the system is off, the system will answer after ten rings. In some cases, the answering system is affected by the ringing system used by your telephone service provider. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers
(pages 107). To determine how many rings activate your voicemail, contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. 146 Appendix Troubleshooting System does not respond to remote commands. Make sure to enter your remote access code correctly (page 122). Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-
tone telephone and cannot activate the answering system. The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code. There may be interference on the phone line you are using. Press dialing keys firmly. System does not record messages. Make sure the answering system is on. Ans sys off should not show on the handset and the /LINE 1 or /LINE 2 light on the telephone base should be on. Make sure the memory of the answering system is not full. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers
(pages 107). To determine how many rings activate your voicemail, contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. System announces, Time and day not set. You need to reset the system clock (page 36). Outgoing announcement is not clear. When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the handset or the telephone base. Make sure there is no background noise (TV, music, etc.) while recording. New voicemail and show on the screens, and I dont know why. Your telephone has both a built-in answering system and voicemail indication. If New voicemail and appear on the screens, and then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them. Contact your telephone service provider for more information on how to access your voicemail. 147 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this users manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the users manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, read the Troubleshooting section on pages 135-147 of this users manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 153-154. Do not open this product except as may be directed in your users manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. Replace batteries only as described in your users manual (page 13). Do not burn or puncture batteries they contain caustic chemicals. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet. CAUTION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com, or call 1 (800) 2223111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. 148 Appendix Important safety information Especially about cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 (800) 8-BATTERY for locations accepting spent Ni-MH batteries. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients:
Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base. Especially about telephone answering systems Two-way recording: This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation. SAVE THESE INSTRUCTIONS 149 Appendix Energy-saving charging mode When this mode is activated, all functions of the cordless handsets, except handset battery charging, will be disabled. To activate the energy-saving charging mode:
1. Press and hold HOLD on the telephone base for about 10 seconds in idle mode. The telephone base shows Deregister all devices? Release HOLD. Quickly press HOLD again or press YES within 5 seconds. 2. When the handsets successfully enter the energy-saving charging mode, all handset screens display To register, see user manual. When the handsets fail to enter this mode, repeat Step 1 to Step 2 above. To deactivate the energy-saving charging mode:
Register your handsets back to the telephone base. See page 124 for handset registration instructions. 150 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. This product meets the applicable Industry Canada technical specifications. 151 Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B) For body worn operation, this handset has been tested and meets the FCC RF exposure guidelines when used with the accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. 152 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. 1. 2. 3. 4. What does this limited warranty cover?
The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (CONSUMER or you) that the product and all accessories provided in the sales package (PRODUCT) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (materially defective PRODUCT)?
During the limited warranty period, the manufacturers authorized service representative repairs or replaces at the manufacturers option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain the defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturers option, is your exclusive remedy. The manufacturer returns the repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty;
whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or PRODUCT returned without a valid proof of purchase (see item 6 below); or Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 153 Appendix Limited warranty 5. How do you get warranty service?
To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, please dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. NOTE: Before calling for service, please review the users manual. A check of the PRODUCTs controls and features might save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer notifies you and requests that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 6. 7. What must you return with the PRODUCT to get warranty service?
You must:
a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and Include valid proof of purchase (sales receipt) identifying the PRODUCT purchased
(PRODUCT model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. b. c. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturers responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you might also have other rights that vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation might not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion might not apply to you. Please retain your original sales receipt as proof of purchase. 154 Appendix Technical specifications RF frequency band Channels Operating temperature Telephone base voltage
(AC voltage, 60Hz) Telephone base voltage
(AC adapter output) Handset battery Charger voltage
(AC adapter output) DECT frequency: 1921.536 1928.448 MHz Bluetooth frequency: 2402.000 2480.000 MHz DECT channel: 5 Bluetooth channel: 79 32F 122F 0C 50C 96 129 Vrms 6VDC @ 600mA 5.1VDC @1000mA 2.4VDC 400mAh, AAAx2, Ni-MH 6VAC @300mA Operation Talk time (cordless handset) Operating time*
up to 7 hours Talk time (cordless handset speakerphone) up to 5 hours Standby up to 7 days
* Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This is achieved through a unique antenna design and advances in noise-filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in range competitions against similarly equipped phones of the leading competition. Now calls can be taken in the basement, backyard and garage with exceptional sound quality. can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset, the weather, and the construction of your home or office. Redefining long range coverage and clarity This telephone base comes with an antenna which gives much better clarity and covers a longr range than before. HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio. It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio. Simulated full duplex handset speakerphone The simulated full duplex speakerphone on your handset allows both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage. 155 Index Index A Add a Bluetooth headset 23, 25, 27 Add a cell phone 21 Alert tones telephone base 119, 120 Announcement 96 Answer a cell call 47 Answer a cell call while on a home call 49 Answer a home call 44 Answer an incoming call during PTT 75 Answering system and voicemail 105 Answering system settings 9699 B Battery charging 13 Battery installation 13 Bluetooth 1722 Bluetooth features 17 Bluetooth setup 2124 C Caller ID (CID) add entries to phone directory 94 dial entries 91 Call waiting on the cell line 48 Cell call 4748 Cell phone download directory 28, 29 Connect an active device 30 D Delete all old messages 111 Delete a message 109110 Dialing from a record in the caller ID history 91 Directory 7792 edit entries 84 name search 83 Download directory 28, 29 DSL 9, 10 E End a cell call 47 End a home call 44 End mute 57 Energy-saving charging mode 141 Expand your telephone system 115 F Find handset 55 H HD audio 146 Headset 23 Hold 58 Home directory 77 I Important safety information 139 140 Intercom 6567, 6769 L Limited warranty 144145 Listening volume 57, 58 M Make a cell call 47 Make a home call 44 Make an outgoing call during PTT 76 Memory match 89 Memos 112 Message alert tone 103 playback 108111 Message capacity 106 Mute 57, 59 O Operating range 146 P Paging 55 Phonebook 77 PTT 7073 Pulse dialing 40 Push-to-talk 7073 156 Index Index Q Quick reference guide 59 R Record announcement 96, 97 Remote access code 113 Repeat messages 109, 110 Replace a handset 116 Ringtone share 17 S Safety information 139140 Share an outside call 56 Skip messages 109, 110 Softphone call 57 Speakerphone 55 Stop messages 109, 110 T Take a call off mute 57 Telephone base screen icons 118 Telephone base installation 9, 10 Telephone operating range 146 Troubleshooting 126138 U USB port 7, 11 V Voice command 58 Voicemail 105 Volume 32, 57, 58 W Wall mounting 14 Warranty 144145 Website 41 157 Remote access wallet card The wallet card below lists the commands needed to control your answering system from any touch-tone telephone. Fold here. Cut along dotted line. Call your telephone number, and then enter your 2-digit remote access code Remote command Action Play all messages .....................1 Play new messages ..................2 Delete the message .................3 (during message playback) Delete all old messages ........33 Repeat or go back ....................4 Stop ..................................................5 Help menu ....................................*5 Skip the message ......................6 Record announcement ...........*7 Turn system on or off .............0 End remote access call ..........8 (or hang up) Model:
Type:
TL86103 DECT 6.0 cordless telephone/answering system with BLUETOOTH wireless technology wireless technology 2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. www.telephones.att.com The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Connect to Cell is a trademark of Advanced American Telephones. Android and Google Play are registered trademarks of Google Inc. iPhone is a registered trademark of Apple, Inc. Printed in China. Issue 1 AT&T 09/13. 91-007268-010-100
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-01-13 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral | |||
3 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | ||
4 | 1921.536 ~ 1928.448 | PUE - Part 15 Unlicensed PCS portable Tx held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2014-01-13
|
||||
1 2 3 4 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0015973951
|
||||
1 2 3 4 | Physical Address |
23/F Tai Ping Ind Center Block 1
|
||||
1 2 3 4 |
Tai Po NT, N/A
|
|||||
1 2 3 4 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
c******@intertek.com
|
||||
1 2 3 4 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 4 |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
EW7
|
||||
1 2 3 4 | Equipment Product Code |
80-9090-00
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
M******** T******
|
||||
1 2 3 4 | Title |
Approbation Supervisor
|
||||
1 2 3 4 | Telephone Number |
852-2********
|
||||
1 2 3 4 | Fax Number |
852-2********
|
||||
1 2 3 4 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 2 3 4 | Name |
M****** N******
|
||||
1 2 3 4 | Physical Address |
Flat D, 5/F., Garment Centre
|
||||
1 2 3 4 |
Kowloon
|
|||||
1 2 3 4 |
Hong Kong
|
|||||
1 2 3 4 | Telephone Number |
852-2******** Extension:
|
||||
1 2 3 4 | Fax Number |
852-2********
|
||||
1 2 3 4 |
m******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 2 3 4 | Name |
M******** N********
|
||||
1 2 3 4 | Physical Address |
Flat D, 5/F., Garment Centre
|
||||
1 2 3 4 |
Kowl0on
|
|||||
1 2 3 4 |
Kowloon
|
|||||
1 2 3 4 |
Hong Kong
|
|||||
1 2 3 4 | Telephone Number |
852-2******** Extension:
|
||||
1 2 3 4 | Fax Number |
852-2********
|
||||
1 2 3 4 |
m******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1.9GHz DECT Cordless Phone with Bluetooth | ||||
1 2 3 4 | 1.9GHz DECT Cordless Phone w/ Bluetooth (BU) | |||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | The power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this composite filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. | ||||
1 2 3 4 | This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this composite filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. | |||||
1 2 3 4 | The output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor as described in this filing. Device has been tested for SAR compliance for head and body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt clip tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, and body-worn accessory use conditions are < 0.10 W/kg, and < 0.10 W/kg, respectively. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 2 3 4 | Name |
J**** H******
|
||||
1 2 3 4 | Telephone Number |
85221********
|
||||
1 2 3 4 | Fax Number |
85278********
|
||||
1 2 3 4 |
j******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 68 CC | 1921.53600000 | 1928.44800000 | 0.0640000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0840000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC