FCC ID: EW780-9867-00 DECT 6.0 Cordless Telephone - Handset

 

Abridged users manual CL82219/CL82229/CL82319/

CL82419 DECT 6.0 cordless telephone/

answering system with caller ID/call waiting This Abridged users manual provides you with basic installation and major operation instructions. Some features are described in an abridged form. Please refer to the online CL82219/CL82229/CL82319/CL82419 DECT 6.0 cordless telephone/answering system with caller ID/

call waiting Complete users manual for a full set of installation and operation instructions at www.telephones.att.com/manuals. This telephone system is compatible with certain AT&T DECT 6.0 cordless headsets and speakerphones. Visit www.telephones.att.com/accessories for a list of compatible cordless headsets and speakerphones. For customer service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: CL82219/CL82229 (two handsets) CL82319 (three handsets) CL82419 (four handsets) Type: DECT 6.0 cordless telephone/answering system with caller ID/call waiting Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. 2018 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Abridged users manual CL82219/CL82229/CL82319/

CL82419 DECT 6.0 cordless telephone/

answering system with caller ID/

call waiting CL82219/CL82229/CL82319/

CL82419 Quick start guide Abridged Users manual Quick start guide Telephone base Cordless handset

(2 for CL82219/CL82229)

(3 for CL82319)

(4 for CL82419) B a t t e r y P a c k

l B o c

p i l e s

W A R N N G I

I A V E R T S S E M E N T

B T 1 8 3 3 4 2 B T 2 8 3 3 4 2

2

. 4 V 4 0 0 m A h N i

M H

) D O N O T B U R N O R P U N C T U R E B A T T E R E S I

. N E P A S I I N C N R E R O U P E R C E R L E S P L E S I

. M a d e i n C h n a i

F a b r i q u e n c h n e i C R 1 5 3 5 I T H S S D E U P I

C E C T V E R S L E H A U T Charger for cordless handset with power adapter installed

(1 for CL82219/CL82229)

(2 for CL82319)

(3 for CL82419) Battery for cordless handset

(2 for CL82219/CL82229)

(3 for CL82319)

(4 for CL82419) Battery compartment cover

(2 for CL82219/CL82229)

(3 for CL82319)

(4 for CL82419) Wall-mount bracket Telephone line cord Power adapter for telephone base Abridged users manual CL82219/CL82229/CL82319/

CL82419 DECT 6.0 cordless telephone/

answering system with caller ID/call waiting For more detailed instructions, refer to the Complete users manual at www.telephones.att.com/manuals. Table of contents Getting started Quick reference guide -

handset .............................................. 1 Quick reference guide -

telephone base .............................4 Telephone base and charger installation .......................................5 Telephone base installation .......................................5 Charger installation ...................6 Battery installation and charging .............................................7 Initial setups ..........................................9 Installation options ........................ 11 Tabletop to wall-mount installation ..................................... 11 Telephone settings Handset settings .............................12 Ringer volume .............................12 Ringer tone ....................................12 Set date/time ..............................13 LCD language .............................. 14 Caller ID announce .................. 14 Set speed dial voicemail number .............................................15 Voicemail (visual message waiting) indicator ..................... 16 Clear voicemail indication .... 16 Key tone ...........................................17 Home area code .........................17 Dial mode ....................................... 18 QUIET mode ................................. 19 Telephone operation Telephone operation ...................20 Making a call ................................20 Answering a call .........................20 Ending a call .................................20 Temporary ringer silencing ..........................................20 Handset speakerphone ........20 Last number redial ...................21 Equalizer ..........................................21 Volume control ...........................21 Call waiting .....................................21 Mute ...................................................21 Handset locator ......................... 22 Join a call in progress............. 22 Options while on calls ................. 23 Chain dialing................................. 23 Options while on calls .................24 Blind transfer ...............................24 Multiple handset use Intercom ............................................... 25 Call transfer using intercom ...26 Push-to-talk (PTT) ......................... 27

................... 27 PTT call to a single device ... 27 Push-to-talk (PTT) .........................28 PTT call to multiple devices .............................................28 Answer a PTT call .....................29 Directory Directory ..............................................30 Create a new directory entry ..................................................30 Review directory entries ......31 Search by name ..........................31 Delete a directory entry .......31 Edit a directory entry ............. 32 Speed dial ............................................ 33 Assign a speed dial number ............................................ 33 Assign your voicemail speed dial number ................... 33 Make a call using speed dial ...................................................... 33 Check your voicemail using speed dial ......................... 33 Caller ID Caller ID .................................................34 Information about caller ID with call waiting .........................34 Missed (new) call indicator ..........................................34 Review the caller ID log ........34 View dialing options ............... 35 Dial a caller ID log entry ....... 35 Save a caller ID log entry to the directory .........................36 Smart call blocker About Smart call blocker* ........ 37 Call categories ............................38 Call controls .................................39 Call block settings ...........................41 Set Smart call blocker

.................................................41

.......................................41 Control calls without numbers (Customized settings) ..........................................43 Control uncategorized calls

(Customized settings) ..........44 Block list ..........................................45 Allow list ..........................................50 Star name list .............................. 55 Screening announcement ...58 Allowed calls .......................................61 Allow calls without numbers ...........................................61 Allow uncategorized calls ....61 Blocked calls ......................................62 Block calls without numbers ..........................................62 Block uncategorized calls ...63 Screen calls without numbers .........................................64 Answer call once .......................65 Send call to answering system .............................................66 End call .............................................66 Screen uncategorized calls ..... 67 Allow call once ............................69 Always allow .................................69 Screen uncategorized calls ..... 70 Block call ......................................... 70 Send call to answering system ............................................. 70 Option while on a call ...................71 Answering system Answering system settings ..... 72 Announcement .......................... 72

............................ 73 Voice guide ................................... 74 Call screening .............................. 75 Number of rings ........................ 75 Remote access code .............. 76 Message alert tone ................. 76 Message recording time ...... 77 About the answering system ............................................. 78 Answering system and voicemail indicators ............... 78 Using the answering machine and voicemail together.......................................... 79 Message capacity ..................... 79 Voice prompts ........................... 79 Call screening ..............................80 Call intercept ...............................80

message alert tone ..................81 Message playback..........................82 Options during playback .....82 Delete all old messages .......83 Recording and playing memos ............................................84 Record a memo .........................84 Play back a memo ....................84 Remote access .................................85 Appendix Adding and registering handsets/headsets/

speakerphones ..........................86 Register a handset to the telephone base ..........................86 Deregistering handsets .............88 Deregister all handsets from the telephone base .................88 Deregistering handsets .............89 Troubleshooting..............................90 Maintenance ......................................96 Important safety information .................................. 97 Safety information .................. 97 Especially about cordless telephones ....................................98 Precautions for users of implanted cardiac pacemakers ..................................99 Pacemaker patients................99 ECO mode ......................................99 Especially about telephone answering systems..................99 For C-UL compliance ................. 100 Mesures de scurit importantes .............................. 100 FCC Part 68 and ACTA .............. 104 FCC Part 15 ....................................... 106 Limited warranty ..........................107

........... 110 DECT 6.0 digital technology .................................. 110 Telephone operating range ............................................... 110

coverage and clarity ............. 110 HD audio ....................................... 110 Simulated full-duplex handset speakerphone ...... 110 Index Index ....................................................... 111 Getting started Quick reference guide - handset 8 7 1 2 3 4 5 6 CHARGE light

On when the handset is charging in the telephone base or charger. PTT

Press to initiate a one-to-one or one-to-group broadcast.

Press and hold to broadcast to a group of system devices. REDIAL/PAUSE

Press repeatedly to view the last ten numbers dialed (page 21).

While entering numbers, press and hold to insert a dialing pause (page 30). MENU/SELECT

When the handset is not in use, press to show the menu.

While in the menu, press to select an item or save an entry or setting. 1 PHONE/FLASH

Press to make or answer a call

(page 20).

During a call, press to answer an incoming call when you receive a call waiting alert (page 21).

During message playback, press to call back the caller if the callers number is available (page 82). OFF/CANCEL

During a call, press to hang up

(page 20).

While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode.

When the handset is ringing, press to mute the ringer temporarily (page 21).

Press and hold while the telephone is not in use to erase the missed call indicator (page 34). Getting started Quick reference guide - handset 8 7 1 2 3 4 5 VOL DIR

Press DIR to show directory entries when the handset is not in use (page 31).

Press to scroll up while in menus.

While entering names or numbers, press to move the cursor to the right.

Press to increase the listening volume when on a call (page 21), or to increase the message playback volume (page 82). VOL CID

Press CID to show caller ID log when the handset is not in use

(page 34).

Press to scroll down while in menus.

While entering names or numbers, press to move the cursor to the

2 6 1

Press to decrease the listening volume when on a call (page 21), or to decrease the message playback volume (page 82).

While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 35).

Press and hold to set (page 15) or to dial your voicemail number (page 33). TONE /a>A

Press to switch to tone dialing temporarily during a call if you have pulse service.

While entering names, press to change the next letter to upper or lower case (page 30). Getting started Quick reference guide - handset 8 7 1 2 3 4 5 6 QUIET# (pound key)

Press repeatedly to display other dialing options when reviewing a caller ID log entry

(page 35).

Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode

(page 19).

/SPEAKER

Press to make or answer a call using the speakerphone (page 20).

Press to switch between the speakerphone and the handset

(page 20). MUTE/DELETE

During a call, press to mute the microphone (page 21).

When the handset is ringing, press to mute the ringer temporarily (page 20).

While reviewing the caller ID log, directory, redial memory, block list, allow list, or star name list, press to delete an individual entry.

While predialing, press to delete digits.

During message or announcement playback, press to delete the playing message or the recorded announcement. CALL BLOCK

Press to block the incoming call when the telephone is ringing(page 37) or during the call(page 71).

When the handset is not in use, press to show the Smart call blocker menu (page 41). 3 Getting started Quick reference guide - telephone base 1 2 3 4 5 IN USE indicator

On when the handset is in use, or when the answering system is answering an incoming call.

Flashes when another telephone is in use on the same line.

Flashes when there is an incoming call. Message counter

Shows the number of messages or other answering system information. X/DELETE

Press to delete the message currently playing (page 82).

Press twice to delete all old messages when the phone is not in use (page 83).

/PLAY/STOP

Press to start or stop message playback (page 82). 4

/REPEAT

Press to repeat a message.

Press twice to play the previous message (page 82).

/SKIP 82).

Press to skip a message (page

VOLUME

During message playback, press to adjust the listening volume

(page 82).

While in idle mode, press to adjust the base ringer volume.

/ANS ON/OFF

Press to turn the built-in

(page 73). FIND HS

While the phone is idle, press to page all handsets (page 22). Getting started Telephone base and charger installation Install the telephone base and charger, as shown below. Telephone base installation If you have DSL high-speed

(not included) is required. Plug one end of the telephone line cord into a telephone jack or a

Route the telephone line cord through this slot. Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base. Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch. Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base. Route the power adapter cord through this slot. Raise the antenna. 5 Getting started Telephone base and charger installation Charger installation Plug the power adapter into a power outlet not controlled by a wall switch. IMPORTANT INFORMATION

Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals.

The power adapters are intended to be correctly oriented in a

to hold the plug in place if it is plugged into a ceiling, under-the-

table or cabinet outlet. Avoid placing the telephone base and charger too close to:

Communication devices such as television sets, VCRs, or other cordless telephones.

Excessive heat sources.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing machine or workbench. 6 Getting started Battery installation and charging Once you have installed the battery, the screen indicates the battery status (see the following table). For best performance, keep the handset in the telephone base or charger when not in use. The

the table in the section on page 110 for battery operating times. Battery indicators Battery status Action The screen is blank, or shows Place in charger and

Battery has no or very little charge. The handset cannot be used. Charge without interruption

(at least 30 minutes). The screen shows Low battery and

Battery has enough Charge without charge to be used for a interruption short time.

(at least 30 minutes). The screen shows Battery is charged. To keep the battery HANDSET X. charged, place it in the telephone base or charger when not in use. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated. THIS SIDE UP 9 4 3 1 R C

. S E

. S E I R I L S P E E e T U A H E

) H T L n i h T R M A i-

N h A E C c n E R R E e u B

T L S R E V T m 0 0 N E 4 U T P U q i r C N O b a M U R F V E E

P 4 S R a

s

. 2 e il S R n

2 I T O R N i h N I C 4 3 p

c E R 3 V U C E C

P C N n I i e U E

k o l 8 A 2 B T B S

G T A d a B O M c a

2 N I 4 N 3 R N E O N P D I S S I P y r 3 8 1 W A D H T e T t t a B B 7 Getting started Battery installation and charging Step 2

upwards until it clicks into place. Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the handset is on during charging. IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.

8 Getting started Initial setups

following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date/time on page 13. To skip setting the date and time, press on the handset. SET DATE MM/DD/YY

SET TIME HH:MM --

the handset then prompts if you want to set Smart call blocker. Press MENU/SELECT on the handset to start the Smart call blocker setup via voice guide. To skip the setup, press on the handset. Voice guide set Smart call blk?

Voice guide to set Smart call blocker:

If you choose to set Smart call blocker via voice guide, you hear a voice prompt, Hello! This voice guide will assist you with the basic setup of Smart call blocker.... Listen to the instructions and then choose one of the following options. On the handset:

Press 1 if you want to screen calls with telephone numbers that

Setting up Smart call blk... are not saved in your directory, allow list or star name list;

Press 2 if you only want to screen calls that do not display a phone number; or

Press 3 if you do not want to screen calls, and want to allow all incoming calls to get through. 9 Getting started Initial setups If you select option 1 to screen all incoming calls, we recommend that you add the phone numbers of your family members and friends, and desired businesses to your Directory (see page 30) or Allow list (see page 50), or add their names to the Star name list (see page 55). This will avoid Smart call blocker to screen their calls. For more details, see Smart call blocker on page 37. Note: You can restart the voice guide to set Smart call blocker by resetting your handset power.

skipped, the handset will prompt if you want to set up the answering system. Press MENU/SELECT to start the answering system setup via voice guide. For more details, see Voice guide on page 74. To skip the setup, press on the handset. Voice guide to set up Ans sys?

10 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow the steps to connect the telephone base with a standard dual-stud telephone wall-mounting plate. You may need a professional to install the mounting plate. Tabletop to wall-mount installation 1. Plug the telephone line into the telephone base. If you are using

wall-mount bracket hole. 2. Align the holes on the wall-mount bracket with the standard wall plate and slide the wall-mount bracket down until it locks securely. 3. Position the telephone base, as shown below. Insert the extended tabs (marked B) of the wall-mount bracket into the slots on the back of the telephone base. Push the telephone base down until it is securely in place. 4. Plug the power adapter into a power outlet not controlled by a wall switch. Plug the other end of the power adapter into the telephone base. Bundle the telephone line cord and power adapter cord neatly with twist ties. 1 3 B A 2 4 11 Telephone settings Handset settings Use the menu to change the telephone settings. 1. Press MENU/SELECT on the handset when it is not in use to enter the main menu. 2. Press CID or DIR to scroll to the feature to be changed. When scrolling through the menu, the >

symbol indicates the chosen menu item. 3. Press MENU/SELECT to select the chosen item.

>Play messages Answering sys

Note: Press the menu display. Press and hold to cancel an operation, back up to the previous menu or exit to return to idle mode. Ringer volume You can set the ringer volume level to one of six levels or turn the

appears on the screen. 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Ringers, then press MENU/SELECT. 3. Press MENU/SELECT again to select Ringer volume. 4. Press CID or DIR to sample each volume level. 5. Press MENU/SELECT to save your preference. Note: The handset ringer volume also determines the ringer volume for intercom calls. Ringer tone You can choose one of ten ringer tones. 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Ringers, then press MENU/SELECT. 3. Press CID or DIR to scroll to Ringer tone, then press MENU/SELECT. 4. Press CID or DIR to sample each ringer tone. 5. Press MENU/SELECT to save your preference. Note: If you turn off the ringer volume, you will not hear ringer tone samples. 12 Telephone settings Handset settings Set date/time The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week

the date and time settings of the caller ID service and set the date and time manually. 1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Set date/time and then press main menu. MENU/SELECT. 3. Press CID or DIR to select the month, then press MENU/SELECT, or enter the number using the dialing keys. 4. Press CID or DIR to select the day, then press MENU/SELECT, or enter the number using the dialing keys. 5. Press CID or DIR to select the year, or enter the number using the dialing keys, then press MENU/SELECT to move on to set the time. 6. Press CID or DIR to select the hour, then press MENU/SELECT, or enter the number using the dialing keys. 7. Press CID or DIR to select the minute, then press MENU/SELECT, or enter the number using the dialing keys. 8. Press CID or DIR to select AM or PM, or press 2 for AM or 7 for PM. Press MENU/SELECT Note: If the clock is not set when a message is recorded, the system announces, Time and day not set, before it plays the message. 13 Telephone settings Handset settings LCD language You can select the language used for all screen displays. 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Press MENU/SELECT to choose LCD language. 4. Press CID or DIR to select English, Franais or Espaol, then press MENU/SELECT. The screen prompts Set English/Franais/Espaol as LCD language?. 5. Press MENU/SELECT to save your preference. Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU/SELECT on the handset in idle mode, then enter 364# Caller ID announce The caller ID announce feature lets you know whos calling without having to look at the display.

1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. MENU/SELECT. 3. Use CID or DIR to scroll to Caller ID annc, then press 4. Use CID or DIR to highlight the desired option, then press MENU/SELECT.

- Change the setting for the base and all handsets.

Local handset - Change the setting for that handset only.

Base - Change the setting for the telephone base only. 5. Use CID or DIR to highlight On or, then press MENU/SELECT. 14 Telephone settings Handset settings Notes:

To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. Pronunciation of names may vary with this feature. Not all names may be pronounced correctly. Set speed dial voicemail number This feature lets you save your voicemail number for quick access when you press and hold the 1 key. To save your voicemail number:

1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Use CID or DIR to scroll to Voicemail #, then press MENU/SELECT. 4. Use the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits) when prompted.

Press CID or DIR

Press MUTE/DELETE on the handset to erase a digit.

Press and hold MUTE/DELETE on the handset to erase all

Press REDIAL/PAUSE to enter a three-second dialing pause (a digits. p appears). 5. Press MENU/SELECT to save. 15 Telephone settings Handset settings Voicemail (visual message waiting) indicator If you subscribe to a voicemail service, New voicemail and the icon appear on the handset screen when you have new voicemail messages. Contact your service provider for more information and assistance about using your voicemail service. Clear voicemail indication Use this feature when the telephone indicates that you have new voicemail but there is none. For example, when you have accessed

the displayed New voicemail and the your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators. icon; it does not delete

1. Press MENU/SELECT when in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Use CID or DIR to scroll to Clr voicemail, then press MENU/SELECT. The screen shows Reset Voicemail Indicator?. 4. Press MENU/SELECT Note: For information about using your voicemail service, contact your telephone service provider. 16 Telephone settings Handset settings Key tone The handset is set to beep with each key press. You can adjust the

1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Use CID or DIR to scroll to Key tone, then press MENU/SELECT. 4. Use CID or DIR to select the desired volume or . 5. Press MENU/SELECT to save your preference. Home area code If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the seven digits of the telephone number. This feature makes it easy for you to place a call from the caller ID log. If you dial ten digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits. To set the home area code:

1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Use CID or DIR to scroll to Home area code, then press MENU/SELECT

4. Use the dialing keys to enter a three-digit home area code.

Press MUTE/DELETE to delete a digit.

Press and hold MUTE/DELETE to delete all digits. 5. Press MENU/SELECT to save. 17 Telephone settings Handset settings Note: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the call ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty). Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To set the dial mode:

1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use CID or DIR to scroll to Settings, then press MENU/SELECT. 3. Use CID or DIR to scroll to Dial mode, then press 4. Use CID or DIR to scroll to Touch-tone or Pulse, then press MENU/SELECT. MENU/SELECT. 18 Telephone settings Handset settings QUIET mode When QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using the speakerphone or setting

QUIET mode, this feature activates immediately and the answering system turns on automatically. When QUIET mode is on, the answering system takes calls and records messages without broadcasting them. To turn QUIET mode on:

1. Press and hold QUIET # in idle mode to enter the QUIET mode setting screen. The screen shows Quiet: _ _ hours (1-12 hours). 2. Use the dialing keys to enter the desired number of hours

(1-12) you would like to turn on QUIET mode, then press MENU/SELECTAnswering sys is ON and then Quiet mode on.

While QUIET mode is on, press and hold QUIET #. The screen then shows Notes:

If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode is on, the sample plays but the feature is still muted after saving the setting. After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again. The PTT function is not available when QUIET mode is on. Intercom is available during QUIET mode, but the handset will not ring.

When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the answering system after screening. For more information on Smart call blocker, see page 37. 19 Telephone operation Telephone operation Making a call

Press number. Answering a call

Press

-OR-

Press any dialing key (0-9, TONE or #). or /SPEAKER. or /SPEAKER, then enter the telephone Ending a call Press or charger. or return the handset to the telephone base Temporary ringer silencing To silence the ringer temporarily on that handset only:

While the telephone is ringing, press or MUTE/DELETE. To silence the ringer temporarily on the telephone base:

While the telephone base is ringing, press VOLUME. Handset speakerphone During a call, press /SPEAKER to switch between handsfree speakerphone and normal handset use. Press to hang up. Note: The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. 20 Telephone operation Telephone operation Last number redial Each handset stores the last 10 telephone numbers dialed (up to 30 digits).

Press REDIAL/PAUSE, then CID, DIR or REDIAL/PAUSE repeatedly or to view up to ten recently called numbers. Press

/SPEAKER to dial the displayed number. Equalizer The handset equalizer enables you to change the quality of the audio to best suit your hearing. While on a call or intercom call, press MENU/SELECT to select the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting). Volume control You can set the listening volume to one of six levels. While on a call, press VOL CID to decrease or press VOL DIR to increase the listening volume. Call waiting If you subscribe to call waiting service from your telephone service provider, and someone calls while you are already on a call, you hear two beeps.

Press

Press hold and take the new call. and forth between calls. on the handset to put your current call on on the handset at any time to switch back Mute

caller, but the caller cannot hear you.

Press MUTE/DELETE while on a call to enable or disable the mute feature. 21 Telephone operation Telephone operation Handset locator The handset locator feature is useful if you misplace any handsets. To start the paging tone:

Press FIND HS on the telephone base to start the paging tone on all handsets for 60 seconds. Note: If you press MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues. or To stop the paging tone:

Press

, /SPEAKER, or any dialing key (0-9, TONE or #) on the handset(s).

-OR-

Press base. FIND HS on the telephone

**Paging**

Join a call in progress When a handset is already on a call and you would like to join the call, press or /SPEAKER on your handset. To end the call using a handset, press or place the handset in the telephone base or charger. The call does not end until all handsets hang up. 22 Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from the numbers in the directory, caller ID log or redial memory while you are on a call. To access the directory or caller ID log while on a call:

1. Press MENU/SELECT. 2. Press CID or DIR to scroll to Directory or Caller ID log, then press MENU/SELECT. 3. Press CID or DIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown. To access the redial list while on a call:

1. Press REDIAL/PAUSE to show the most recently dialed number. 2. Press CID or DIR to scroll to the desired number, or press REDIAL/PAUSE repeatedly to find the desired number. Press MENU/SELECT to dial the number shown. 23 Telephone operation Options while on calls

device or any device without notifying them.

desired device:

1. During the call, press MENU/SELECT. 2. Press CID or DIR to scroll to , then press MENU/SELECT.

If you have a two-handset system and no other registered devices, the outside call is put on hold and your handset shows The other handset rings and shows

. If you have other registered device(s) or more than two handsets, your screen shows TRANSFER TO:. Use the dialing keys to enter a specific device number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE followed by # for all devices), or press CID or DIR to scroll to the desired device and press MENU/SELECT. The outside call is put on hold and your handset screen shows call... or . The other device rings and shows (HANDSET represents the handset name, X represents the handset number). 3. To answer the call on the destination handset, press

, /SPEAKER, or any dialing key (0-9, TONE or

#). The initiating handset shows and goes to idle mode. 24 Multiple handset use Intercom Use the intercom feature for conversations between two handsets, or a handset and a cordless headset/speakerphone (sold separately). You can purchase expansion handsets (AT&T model CL80119), cordless headsets, and speakerphones (AT&T model TL80133) for this telephone base to expand your telephone system (up to 12 handsets, cordless headsets or speakerphones). Using a handset to initiate intercom calls:

1. Press MENU/SELECT in idle mode to enter the main menu. Press

CID or DIR to scroll to Intercom, then press MENU/SELECT.

If you have a two-handset system and no other registered devices, the handset shows Calling other handset. If you have more than two handsets and/or cordless headset(s)/

speakerphone(s), the handset shows INTERCOM TO: Use the dialing keys to enter a specific device number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, #

for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all devices), or press CID or DIR to scroll to the desired device and press MENU/SELECT. Your handset screen shows Calling HANDSET X, or Calling all devices. The destination handset(s) rings and shows Other handset is calling, HANDSET X is calling or HANDSET X is calling all

(HANDSET represents the handset name, X represents the handset number). 2. To answer the intercom call, press

, /SPEAKER or any dialing key (0-9, TONE , or #) on the called handset. Both handsets now show Intercom. 3. To end the intercom call, one party presses

, or places the handset back in the telephone base or charger. The other party hears four beeps. Both devices display Intercom ended. 25 Multiple handset use Call transfer using intercom Use the intercom feature to transfer an outside call to another system device. You can also share an outside call with another system device.

1. During the call, press MENU/SELECT. 2. Press CID or DIR to scroll to Intercom and press MENU/SELECT. 3. If you have a two-handset system and no other registered devices, your handset screen shows Calling other handset.

-OR-

If you have more than two handsets and/or cordless headset(s)/

speakerphone(s), your screen shows INTERCOM TO: Press

CID or DIR to scroll to the desired device and press MENU/SELECT. Your screen shows Calling HANDSET X or Calling all handsets. 4. When the destination device picks up, your handset shows Intercom and the outside call is put on hold. You have the following options:

You can transfer the call. Press MENU/SELECT, then press

CID or DIR to scroll to . Press MENU/SELECT again. The handset shows . The other device automatically connects to the outside call.

You can let the other device join you on the outside call in a three-way conversation. Press MENU/SELECT. Press CID or

DIR to highlight Share call, then press MENU/SELECT.

You can end the intercom call and continue the outside call with your handset. Press ended intercom call party hears four beeps). on your handset (the 26 Multiple handset use Push-to-talk (PTT) You can directly broadcast messages to the speakerphone of any device. Press and hold PTT on a handset to begin two-way communication.

Only one device can talk at a time. To do so, press and hold PTT.

You must release PTT, so the other person can respond.

Only one PTT session can be active at a time.

While PTT is in use between two devices, other devices cannot use the intercom feature but can access the answering system. Note: The PTT function is not available when QUIET mode is on or if you have only one handset.

1. Press PTT when the handset is not in use. The PUSH TO TALK 2. Press CID or DIR to choose , then press 3. Press CID or DIR to choose On or , then press menu displays. MENU/SELECT. MENU/SELECT. PTT call to a single device 1. There are a few ways to begin a PTT call to a single device. When the handset is not in use:

If you have a two-handset system, press and hold PTT. If you have more than two handsets, press PTT. Press CID or DIR to choose the destination handset number and press MENU/SELECT or PTT. 2. Press and hold PTT. 3. Release PTT after speaking. 4. To end the PTT call, press the telephone base or charger. 27 or place the handset in Multiple handset use Push-to-talk (PTT) PTT call to multiple devices When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of

a maximum of one-to-three calls when six or more handsets are

feature. Other handsets can only use PTT for one-to-one calls.

1. Press and hold PTT until the handset shows Connecting to group.... When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold PTT when you want to speak. Speak towards the handset. Your voice is broadcast to all devices. 3. Release PTT after speaking. 4. Any device can reply (see Answer a PTT call). 28 Multiple handset use Push-to-talk (PTT) Answer a PTT call You can respond to a PTT call, as described below. 1. When your device receives a PTT call, it beeps and shows Press and hold [PTT] to talk. 2. When the other party is speaking, your speakerphone light is on, and your device shows PTT From HS X To HS X X represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear). 3. Press and hold [PTT] to talk), press and hold PTT on your handset. You will hear a chirp. Speak towards the device.

While you are speaking, your device shows PTT To handset: X

(X represents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear).

Your voice is broadcast to all destination devices.

PTT.

press and hold PTT to continue speaking. 29 Directory Directory The directory can store up to 50 entries, which are shared by all system handsets. Create a new directory entry 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press CID or DIR to scroll to Directory, then press MENU/SELECT. MENU/SELECT. 3. Press CID or DIR to scroll to Add contact, then press 4. Use the dialing keys to enter a telephone number (up to 30 digits) when prompted.

Press CID or DIR

Press MUTE/DELETE to erase a digit.

Press and hold MUTE/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).

-OR-

Copy a number from the redial list by pressing REDIAL/PAUSE, then CID, DIR or pressing REDIAL/PAUSE repeatedly to locate the number. Press MENU/SELECT to copy the number. 5. Press MENU/SELECT to move on to the name. 6. Use the dialing keys to enter a name (up to 15 characters) when prompted. Press a key repeatedly until the desired character shows on the screen.

Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT to store your new directory entry. 30 Directory Directory Review directory entries Press DIR when in idle mode. Press CID or DIR to browse through the directory. Search by name 1. Press DIR 2. When an entry appears, press the dialing keys (0-9) to start a name

directory beginning with that letter. Press CID or DIR to scroll through the directory. 3. To see other names starting with the letters on the same dialing key, keep pressing the key. The names appear in alphabetical order. Delete a directory entry To delete the displayed directory entry, press MUTE/DELETE. Press MENU/SELECT 31 Directory Directory Edit a directory entry 1. When a directory entry displays, press MENU/SELECT. The screen shows EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 3. 2. To edit the number:

Use the dialing keys to enter digits.

Press CID or DIR

Press MUTE/DELETE to erase a digit.

Press and hold MUTE/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to add a three-second dialing pause (a p appears). 3. Press MENU/SELECT to move on to the name. The screen shows EDIT NAME along with the name to be edited. 4. To edit the name:

Use the dialing keys to enter characters.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case. 5. Press MENU/SELECT to save the entry. Note: If the telephone number has more than 11 digits, EDIT NUMBER will not be displayed on the screen. 32 Directory Speed dial The telephone system has nine speed dial locations (2-9, 0) and a voicemail access location 1 where you can store the telephone numbers you wish to dial more quickly. You can store up to 30 digits in each location. Speed dial assignments can only be selected from the existing directory entries. The voicemail access number must be manually entered. In the directory, speed dial locations are indicated by their number on the bottom of the screen. Assign a speed dial number 1. When the telephone is idle, press MENU/SELECT. 2. Press CID or DIR to scroll to Directory. Press MENU/SELECT. 3. Press CID or DIR to scroll to Speed dial. Press MENU/SELECT. 4. Press CID or DIR to choose your desired speed dial location

(0 or 2-9), then press MENU/SELECT. The screen briefly shows

and then displays the directory list. 5. Press CID or DIR to scroll to the phone number you wish to assign to the selected speed dial location. 6. Press MENU/SELECT to save the setting and return to the previous menu. Assign your voicemail speed dial number To assign your voicemail speed dial number to location page 15. 1, see Make a call using speed dial When in idle mode, press and hold the dialing key (0 or 2-9) corresponding to the assigned location you wish to call. Check your voicemail using speed dial When in idle mode, press and hold number you have set. See page 15 to set your voicemail speed dial number. 1 to dial the voicemail 33 Caller ID Caller ID

service providers. The telephone stores caller ID information for the last 50 incoming calls. This information is common to all handsets.

Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call. There are fees for caller ID services. In addition, services may not be available in all areas. Contact your telephone service provider for more information about caller ID services. Missed (new) call indicator When a handset is in idle mode and has new or missed calls, its screen shows XX Missed calls. If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold on the handset for four seconds when the handset is idle. Review the caller ID log 1. When the handset is in idle mode, press CID to review the caller ID log in reverse chronological order starting with the most recent call. 2. Press CID or DIR to scroll through the list. 3. Press on the handset to exit the caller ID log. 34 Caller ID Caller ID View dialing options While reviewing the caller ID log, press

# (pound key) repeatedly to show

long distance numbers before dialing or saving the telephone number in the directory. Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory. 883-2445 1-883-2445 Press #

888-883-2445 1-888-883-2445 883-2445 1-883-2445 888-883-2445 1-888-883-2445 Press 1 When the number is in the correct format for dialing, press or /SPEAKER to call the number. Note: This feature is only available to telephone numbers with 7 or 10 digits. Dial a caller ID log entry 1. When in the caller ID log, press CID or DIR to browse. 2. Press or /SPEAKER to dial the displayed entry. 35 Caller ID Caller ID Save a caller ID log entry to the directory 1. When in the caller ID log, press CID or DIR to browse. 2. When the desired entry displays, press MENU/SELECT. 3. Press MENU/SELECT to choose Directory. 4. When the screen displays EDIT NUMBER, use the dialing keys to edit the number.

Press CID or DIR to move the cursor to the left or right.

Press MUTE/DELETE to backspace and erase a digit.

Press and hold MUTE/DELETE to erase the entire entry.

Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p appears). 5. Press MENU/SELECT to move to the name. 6. When the screen displays EDIT NAME, use the dialing keys to edit the name.

Press CID or DIR to move the cursor to the left or right.

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key).

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT when done. The screen shows Saved to directory. 36 Smart call blocker About Smart call blocker*

If you have subscribed to caller ID service, then you can use Smart

while allowing welcome calls to get through. You can set up your lists of welcome callers and unwelcome callers. Smart call blocker allows calls from your welcome callers to get through, and it blocks calls from your unwelcome callers. For other unknown calls, you can allow these calls, block these calls, or forward these calls to the answering system.

asking the callers to press the pound key (#) before the calls are put through to you. You can also set Smart call blocker to screen incoming calls by asking the callers to record their names and press the pound key

(# and announces the callers name. You can then choose to block or answer the call, or you can forward the call to the answering system. If the caller does not respond or record his/her name, the call is blocked from ringing through. When you add your welcome callers to your allow list, their calls will bypass all screening and ring directly to your handsets. Notes:

Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through and ring by default. You can change the Smart call blocker settings to screen incoming calls. For more details, see (page 41), (page 43) and

(page 44).

names that are not yet saved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in again.

on page 41.

* Includes licenced QaltelTM technology. QaltelTM is a trademark of Truecall Group Limited. 37 Smart call blocker About Smart call blocker Call categories

Welcome calls Welcome calls are calls with telephone numbers saved in your allow list or directory, and not in your block list. Welcome calls also include calls with caller names saved in your star name list.

robocalls to communicate important information to you. Robocall uses an autodialer to deliver pre-recorded messages. By entering the name of the organizations into the star name list, it ensures these calls will ring through when you only know the caller names but not their numbers. Unwelcome calls Unwelcome calls are calls with telephone numbers saved in your block list, and you want to block their calls. Calls without numbers Calls without numbers are calls that are out of area or with numbers set to Private. Uncategorized calls Uncategorized calls include calls with absent caller ID number, calls with numbers that are not in your directory, allow list, or block list, or calls with caller ID names that are not in your star name list. Note: The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name list stores up to 10 names. 38 Smart call blocker About Smart call blocker Call controls

Smart call blocker is set to on, and to allow all incoming calls

incoming calls will be muted. If your directory, allow list, star name list and block list are empty when Smart call blocker is on, and you have set to screen calls, the telephone will screen all incoming calls and asks callers to announce their names or press the pound key (#).

numbers saved in the block list. If QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the answering system

Smart call blocker handles calls in the following ways:

Call category Call control Welcome calls Unwelcome calls Allow The telephone rings when there is an incoming call with number saved in your allow list or directory, but not in your block list. Robocalls with caller names saved in your star name list will also ring. Block The telephone does not ring when there is an incoming call with number saved in your block list, and the call will be rejected. 39 Smart call blocker About Smart call blocker Call category Call control Calls without numbers

You can set to screen, allow, or block all calls of this call category, or to send these calls to the answering system. Allow is the default setting. To change the setting, see Control calls without numbers on page 41. Uncategorized calls

You can set to screen, allow, or block all calls of this call category, or to send these calls to the answering system. Allow is the default setting. To change the setting, see Control uncategorized calls on page 44. Screening with caller name If you have selected this option, the telephone plays the screening announcement, and then ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the callers name announced. You can decide whether to accept or reject the call, or to forward the call to the answering system. Screening without caller name If you have selected this option, the telephone plays the screening announcement, and then ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call. Allow (default settings) The telephone allows the calls to get through and ring. The callers number will not be saved to the allow list. Answering system If you have selected this option, the telephone forwards the calls to the answering system without ringing. Block If you have selected this option, the telephone rejects the calls with block announcement without ringing. The callers number will not be saved to the block list. 40 Smart call blocker Call block settings

The Smart call blocker feature is set to on by default. 1. Press CALL BLOCK on the handset when it is not in use, and then press MENU/SELECT to select .

-OR-

Press MENU/SELECT to enter the main menu when the handset is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT twice. 2. Press CID or DIR to highlight On or , then press MENU/SELECT to save the setting. You hear a confirmation tone. Note: If you set to , all settings under (see below) will be invalid.

up Smart call blocker. 1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to , then press MENU/SELECT. 3. Press CID or DIR to select one of the following options, then press MENU/SELECT.

Screen unknown - screen any calls from numbers not saved in the Directory, Allow list, or Star name list.

uncategorized calls, and to ask the callers to say their names before putting the calls through to you. See Screen calls without numbers (page 64) and Screen uncategorized calls (page 67). 41 Smart call blocker Call block settings

Screen w/o num - screen calls that do not display a phone number.

ask the callers to say their names before putting the calls through to you. It sets the telephone to allow all calls with numbers but the numbers are not in the Directory, Allow list, or Star name list.

Block only (default setting) - allow all calls to ring, except calls with numbers on the Block list.

the Block list.

Screen robot - screen robocalls.

get through and ring, but to screen uncategorized calls and ask the caller to press the pound key (#) before putting the call through to you.

UnknownToAns.S - forward any calls from numbers not saved in the Directory, Allow list, or Star name list to the answering system.

and uncategorized calls to the answering system.

Ring all calls - allow all calls to ring and do not block any numbers.

get through and ring.

Customise - manually set the call handling options for calls without numbers and uncategorized calls. See Control calls without number (page 43) and Control uncategorized calls (page 44). Note: If you set to , all settings under will be invalid. 42 Smart call blocker Call block settings Control calls without numbers (Customized settings) Use this setting to control out of area or Private calls. You can choose to allow or reject these calls directly. You can also choose to screen them with or without learning the callers names before you decide whether to answer or reject these calls. Moreover, you can forward these calls to the answering system. To change the setting:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to , then press MENU/SELECT. 3. Press CID or DIR to scroll to Customise, then press MENU/SELECT. 4. Press MENU/SELECT again to select Calls w/o num. 5. Press CID or DIR to choose one of the following options, then press MENU/SELECT.

Screening - ask the caller to press the pound key (#) or to say his/her name before the call rings on your telephone.

Allow - allow the calls to get through and ring.

Answering sys - forward the calls to the answering system without ringing.

Block - reject the calls with block announcement. 6. If you select Screening, press CID or DIR to choose one of the following options, then press MENU/SELECT.

w/ Caller name - ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the callers name announced. You can decide whether to answer or reject the call, or to forward the call to the answering system.

w/o Caller name - ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call. 43 Smart call blocker Call block settings Control uncategorized calls (Customized settings) Use this setting to control calls with numbers that are not on your directory, allow list or block list, or have no caller ID number display. You can choose to allow or reject these calls directly. You can also choose to screen them with or without learning the callers names before you decide whether to answer or reject these calls. Moreover, you can forward these calls to the answering system. To change the setting:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to , then press MENU/SELECT. 3. Press CID or DIR to scroll to Customise, then press MENU/SELECT. 4. Press CID or DIR to scroll to Uncategorized, then press 5. Press CID or DIR to choose one of the following options, then MENU/SELECT. press MENU/SELECT.

Screening - ask the caller to press the pound key (#) or to say his/her name before the call rings on your telephone.

Allow - allow the calls to get through and ring.

Answering sys - send the calls to the answering system without ringing.

Block - reject the calls with block announcement. 6. If you select Screening, press CID or DIR to choose one of the following options, then press MENU/SELECT.

w/ Caller name - ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the callers name announced. You can decide whether to answer or reject the call, or to forward the call to the answering system.

w/o Caller name - ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call. 44 Smart call blocker Call block settings Note: If you select , the telephone

#) or announces his/

her name before putting the call through to you. There may be robocalls that you do not want to miss. For example, robocalls with announcements or notices from schools or pharmacies. You can set up your star name list with these caller names to allow their calls to get through to you. See on page 55. Block list Add numbers that you want to prevent their calls from ringing through. The block list stores up to 1,000 entries. Add a block entry:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Block list, and then press 3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT. MENU/SELECT. 4. When the screen displays ENTER NUMBER, use the dialing keys to enter a number (up to 30 digits).

Press CID or DIR

Press MUTE/DELETE to erase a digit.

Press and hold MUTE/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).

-OR-

Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press CID, DIR or REDIAL/PAUSE desired number. Press MENU/SELECT to copy the number. 5. Press MENU/SELECT to move on to the name.

The screen shows Number already saved if the number is already in the block list. You cannot save the same number twice. 45 Smart call blocker Call block settings 6. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key repeatedly until

is capitalized.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT to store your block entry. Notes:

Numbers saved in your directory can also be saved to the block list.

If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed. Review block list:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT. 3. Press MENU/SELECT to choose Review. 4. Press CID or DIR to browse through the block entries. Note: appears if there are no block entries. 46 Smart call blocker Call block settings Save a caller ID log entry to block list:

1. Search for the desired caller ID log entry (see Review the caller ID log on page 34). 2. When the desired entry displays, press MENU/SELECT. 3. Press CID or DIR to scroll to Block list, then press MENU/SELECT. 4. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, when necessary.

Press CID or DIR

Press MUTE/DELETE on the handset to backspace and erase a digit.

Press and hold MUTE/DELETE to erase the entire entry.

Press and hold REDIAL/PAUSE to insert a three-second dialing 5. Press MENU/SELECT to move to the name. The screen displays pause (a p appears). EDIT NAME. 6. Use the dialing keys to add or edit the name.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key).

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT when done and the screen shows Saved to block list. 47 Smart call blocker Call block settings Edit a block entry:

1. Search for the desired entry in the block list (see Review block list on page 46). 2. When the desired entry displays, press MENU/SELECT. The screen displays EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 4. 3. To edit the number:

Use the dialing keys to enter digits.

Press CID or DIR

Press MUTE/DELETE on the handset to erase a digit.

Press and hold MUTE/DELETE to erase

Press and hold REDIAL/PAUSE to enter a three-second dialing all digits. pause (a p appears). 4. Press MENU/SELECT to move on to the name. The screen displays EDIT NAME along with the name to be edited. 5. To edit the name:

Use the dialing keys to enter characters.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters. 6. Press MENU/SELECT to save the entry. The screen displays Saved to block list. 48 Smart call blocker Call block settings Delete a block entry:

1. Search for the desired entry in the block list (see Review block list on page 46). 2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?. 3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry. Delete all block entries:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT. 3. Press CID or DIR to highlight Delete all, then press MENU/SELECT. The screen shows Delete all in block list?. 4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone. 49 Smart call blocker Call block settings Allow list Add numbers that you want to allow their calls to get through to you. The allow list stores up to 200 entries. Add an allow entry:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Allow list, and then press 3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT. MENU/SELECT. 4. When the screen displays ENTER NUMBER, use the dialing keys to enter a number (up to 30 digits).

Press CID or DIR

Press MUTE/DELETE to erase a digit.

Press and hold MUTE/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).

-OR-

Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press CID, DIR or REDIAL/PAUSE desired number. Press MENU/SELECT to copy the number. 5. Press MENU/SELECT to move on to the name.

The display shows Number already saved if the number is already in the allow list. You cannot save the same number twice. 50 Smart call blocker Call block settings 6. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key repeatedly until

is capitalized.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT to store your allow entry. Notes:

Numbers saved in your directory can also be saved to the allow list.

If you save an allow entry that has already been saved to the block list, the entry in the block list will be removed. Review allow list:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Allow list, and then press MENU/SELECT. 3. Press MENU/SELECT to choose Review. 4. Press CID or DIR to browse through the allow entries. Note: appears if there are no allow entries. 51 Smart call blocker Call block settings Save a caller ID log entry to allow list:

1. Search for the desired caller ID log entry (see Review the caller ID log on page 34). 2. When the desired entry displays, press MENU/SELECT. 3. Press CID or DIR to scroll to Allow list, then press MENU/SELECT. 4. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, when necessary.

Press CID or DIR

Press MUTE/DELETE on the handset to backspace and erase a digit.

Press and hold MUTE/DELETE to erase the entire entry.

Press and hold REDIAL/PAUSE to insert a three-second dialing 5. Press MENU/SELECT to move to the name. The screen displays pause (a p appears). EDIT NAME. 6. Use the dialing keys to add or edit the name.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key).

Press TONE to change the next letter to upper or lower case. 7. Press MENU/SELECT when done and the screen shows Saved to allow list. 52 Smart call blocker Call block settings Edit an allow entry:

1. Search for the desired entry in the allow list (see Review allow list on page 51). 2. When the desired entry displays, press MENU/SELECT. The screen displays EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 4. 3. To edit the number:

Use the dialing keys to enter digits.

Press CID or DIR

Press MUTE/DELETE on the handset to erase a digit.

Press and hold MUTE/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears). 4. Press MENU/SELECT to move on to the name. The screen displays EDIT NAME along with the name to be edited. 5. To edit the name:

Use the dialing keys to enter characters.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters. 6. Press MENU/SELECT to save the entry. The screen displays Saved to allow list. 53 Smart call blocker Call block settings Delete an allow entry:

1. Search for the desired entry in the allow list (see Review allow list on page 51). 2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?. 3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry. Delete all allow entries:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Allow list, and then press MENU/SELECT. 3. Press CID or DIR to highlight Delete all, then press MENU/SELECT. The screen shows Delete all in allow list?. 4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone. 54 Smart call blocker Call block settings Star name list There are many organizations like schools, medical offices, and pharmacies that use robocalls to communicate important information to you. Robocall uses an autodialer to deliver pre-

recorded messages. By entering the name of the organizations into the star name list, it ensures these calls will ring through when you only know the caller names but not their numbers. If the first 15 characters of the incoming caller IDs name match a name saved in your star name list, the call will get through and ring. The star name list stores up to 10 names. Add a star name entry:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Star name list, and then press 3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT. MENU/SELECT. 4. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key repeatedly until

is capitalized.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case. 5. Press MENU/SELECT to store your star name entry. The display shows Name already saved if the name is already in the star name list. You cannot save the same name twice. 55 Smart call blocker Call block settings Review star name list:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Star name list, and then press MENU/SELECT. 3. Press MENU/SELECT to choose Review. 4. Press CID or DIR to browse through the star name entries. Note: appears if there are no star name entries. Save a caller ID log entry to star name list:

1. Search for the desired caller ID log entry (see Review the caller ID log on page 34). 2. When the desired entry displays, press MENU/SELECT. 3. Press CID or DIR to scroll to Star name list, then press 4. The handset displays Star this name?, and the caller ID name of 5. Press MENU/SELECT, and the screen shows Saved to star name MENU/SELECT. the caller. list. 56 Smart call blocker Call block settings Edit a star name entry:

1. Search for the desired entry in the star name list (see Review star name list on page 56). 2. When the desired entry displays, press MENU/SELECT. The screen displays EDIT NAME along with the name to be edited. 3. To edit the name:

Use the dialing keys to enter characters.

Press CID or DIR

Press 0 to add a space.

Press MUTE/DELETE to erase a character.

Press and hold MUTE/DELETE to erase all characters. 4. Press MENU/SELECT to save the entry. The screen displays Saved to star name list. Delete a star name entry:

1. Search for the desired entry in the star name list (see Review star name list on page 56). 2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?. 3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry. Delete all star name entries:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Star name list, and then press MENU/SELECT. 3. Press CID or DIR to highlight Delete all, then press MENU/SELECT. The screen shows Delete all in star name list?. 57 Smart call blocker Call block settings 4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone. Screening announcement If you have set to screen calls without numbers and/or screen uncategorized calls, the callers of one or all of the following incoming call categories will hear a screening announcement.

Calls that are out of area or with numbers set to Private.

Calls with numbers that are not on your directory, allow list, or block list, or with absent caller ID number.

Calls with caller ID names that are not on your star name list. The telephone has two screening options, and each option has its default screening announcements. Screening with caller name - Hello. Calls to this number are being

then press pound.

-OR-

Screening without caller name - Hello. Calls to this number are

please hang up now. You can use these announcements, or record your own name to replace this number in the announcements. Please refer to announcements on page 60. 58 Smart call blocker Call block settings

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Screening annc, then press 3. Press CID or DIR to scroll to Play annc, then press MENU/SELECT. MENU/SELECT. 4. Press MENU/SELECT again to select w/ Caller name.

name:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Screening annc, then press 3. Press CID or DIR to scroll to Play annc, then press 4. Press CID or DIR to scroll to w/o Caller name, then press MENU/SELECT. MENU/SELECT. MENU/SELECT. 59 Smart call blocker Call block settings

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Screening annc, then press MENU/SELECT. 3. Press MENU/SELECT to select Rec your name. The system announces, Record after the tone. Press 5 when you are done. 4. Speak towards the handset to record your name. Press 5 to end recording. To listen to the announcement with your recorded name again, scroll to Play annc and press MENU/SELECT. Reset all your screening announcements:

1. Press CALL BLOCK on the handset when it is not in use. Press MENU/SELECT to enter the main menu when the handset

-OR-

is not in use. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT. 2. Press CID or DIR to scroll to Screening annc, then press MENU/SELECT. 3. Press CID or DIR to scroll to Reset annc, then press MENU/SELECT. The screen shows . Press MENU/SELECTAnnc. reset

before returning to the previous menu.

-OR-

While an announcement is playing, press MUTE/DELETE. The screen shows Annc. Deleted before return-

ing to the previous menu. Your name will be deleted from all the screening announcements, and the telephone will use the default screening announcements described on page 58. 60 Smart call blocker Allowed calls If Smart call blocker is on, the following types of incoming calls can get through to you and ring on your telephone system:

Calls with numbers saved in your allow list.

Calls with numbers saved in your directory, but not on your block list.

Calls with caller ID names saved in your star name list. Note: , all incoming calls will ring on your telephone system, including calls with numbers saved in the block list. Allow calls without numbers If Smart call blocker is on, and you have selected the customized setting to allow calls without numbers, the following type of incoming calls will ring on your telephone system.

Calls that are out of area or with numbers set to Private. Allow uncategorized calls If Smart call blocker is on, and you have selected the customized setting to allow uncategorized calls, the following type of incoming calls will ring on your telephone system.

Calls with numbers that are not on your directory, allow list or block list, or with absent caller ID number.

Calls with caller ID names that are not on your star name list. Note: If you have selected the customized setting to allow all uncategorized calls, the callers numbers will not be saved to the allow list. If you want to save the callers number to your allow list or block list, you can retrieve the number from caller ID log and save it to the allow list or block list. See on page 47 and

on page 52. If you want to retrieve the name from caller ID log and save it to the star name list. See

on page 56. 61 Smart call blocker Blocked calls If Smart call blocker is on, incoming calls with numbers saved in your block list will not ring. The telephone plays the block announcement Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up. to the caller, and the call will be terminated.

, incoming calls with numbers saved in your block list will ring on your telephone system. Block calls without numbers If Smart call blocker is on, and you have selected the customized setting to block calls without numbers, the following type of incoming calls will not ring, and the calls will be terminated.

Calls that are out of area or with numbers set to Private. The telephone plays the block announcement Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up. to the caller. Note: The telephone can respond to remote access code while it is playing the block announcement. This allows you to access your answering system from an unknown number remotely. See

on page 85. 62 Smart call blocker Blocked calls Block uncategorized calls If Smart call blocker is on, and you have selected the customized setting to block uncategorized calls, the following type of incoming calls will not ring, and the calls will be terminated.

Calls with numbers that are not on your directory, allow list or block list, or with absent caller ID number.

Calls with caller ID names that are not on your star name list. The telephone plays the block announcement Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up. to the caller. Notes:

If you have set to block all uncategorized calls, the callers numbers will not be saved to the block list. If you want to save the callers number to your allow list or block list, you can retrieve the number from caller ID log and save it to the allow list or block list. See on page 47 and on page 52. You can also retrieve the name from caller ID log and save it to the star name list. See

on page 56. The telephone can respond to remote access code while it is playing the block announcement. This allows you to access your answering system from an unknown number remotely. See on page 85. 63 Smart call blocker Screen calls without numbers If Smart call blocker is on, and your telephone is set to screen calls without number, the telephone will not ring when receiving incoming calls that are out of area or with numbers set to Private. It plays a screening announcement to the caller and asks the caller to respond before putting the call through to you. The telephone has two screening options. You can set your Smart call blocker to screen these calls by asking the callers to record their names and then press the pound key (#). Alternatively, you can screen these calls by only asking the callers to press the pound key (#).

When screening a call, the telephone announces to the caller, Hello. Calls to this number are being screened by Smart call blocker. Please

completes the request, the telephone announces to the caller Please wait a moment while your call is connected.. The telephone starts ringing and announces the callers name. The telephone screen displays Screened call and you can pick up the call. The telephone will then ask whether you want to answer or reject the call, or to forward the call to the answering system.

When screening a call, the telephone announces to the caller, Hello. Calls to this number are being screened by Smart call blocker. If youre

presses the pound key (#), the telephone announces to the caller Please wait a moment while your call is connected.. The telephone starts ringing, and you can answer the call. This option is suitable

messages, for example, robocalls and telemarketing calls. 64 Smart call blocker Screen calls without numbers Notes:

The telephone announces to the caller with Hello. Calls to this number are being screened by Smart call blocker... If you have recorded your name in the screening announcements, your recorded name will replace this number in the announcements. See on page 58. If the caller hangs up before the call is screened, or without leaving his/her name while the call is being screened, the call will be logged as missed call in the caller ID log.

While a call is being screened, you can press or

/SPEAKER to stop OFF/CANCEL to hang up the call. screening and answer the call. After the telephone screened a call, and is ringing and announcing the callers name, you can press OFF/CANCEL to mute the ringer, or press CALL BLOCK to reject the call directly. After you picked up a screened call and the telephone is announcing the screening options, you can press If you receive a call waiting call without number while on a call, Smart call blocker will not screen the new call. You can press or Robocalls are unable to respond to the screening announcement, and therefore, will not get through and ring. If you want to allow some robocalls to get through, save their names in the star name list. See page 55. The telephone can respond to remote access code while it is playing the screening announcement. This allows you to access your answering system from an unknown number remotely. See

on page 85.

/SPEAKER to take the new call. Answer call once 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 1 to answer the call. The telephone number will not be added to your allow list. 65 Smart call blocker Screen calls without numbers Send call to answering system 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 4 to send the caller to the answering system. Note: The caller is sent to the answering system and can leave a message even if the answering system is off. End call 1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID feature, the telephone announces You have a call from... picked up the call, the telephone announces

. 2. If you do not want to take the call, press to end the call. 66 Smart call blocker Screen uncategorized calls If Smart call blocker is on, and your telephone is set to screen uncategorized calls, the telephone will not ring when receiving the following incoming calls:

Incoming calls with absent caller ID numbers;

Incoming calls with numbers that are not in your directory, allow list, nor block list; or Incoming calls with names that are not in your star name list. The telephone plays a screening announcement to the caller and asks the caller to respond before putting the call through to you. There are two screening options. You can set your Smart call blocker to screen these calls by asking the callers to record their names and then press the pound key (#). Alternatively, you can screen these calls by only asking the callers to press the pound key (#).

When screening a call, the telephone announces to the caller, Hello. Calls to this number are being screened by Smart call blocker. Please

completes the request, the telephone announces to the caller Please wait a moment while your call is connected.. The telephone starts ringing and announces the callers name. The telephone screen displays Screened call and you can pick up the call. The telephone will then ask whether you want to answer or reject the call, or to forward the call to the answering system.

When screening a call, the telephone announces to the caller, Hello. Calls to this number are being screened by Smart call blocker. If youre

presses the pound key (#), the telephone announces to the caller Please wait a moment while your call is connected.. The telephone starts ringing, and you can pick up the call. This option is suitable

autodialers to deliver pre-recorded messages, for example, robocalls and telemarketing calls. 67 Smart call blocker Screen uncategorized calls Notes:

You can set Smart call blocker to screen and filter all uncategorized calls from numbers or names that are not saved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in again. The telephone announces to the caller with Hello. Calls to this number are being screened by Smart call blocker... If you have recorded your name in the screening announcements, your recorded name will replace this number in the announcements. See on page 58. If the caller hangs up before the call is screened, or without leaving his/her name while the call is being screened, the call will be logged as missed call in the caller ID log.

While a call is being screened, you can press or

/SPEAKER to stop screening and answer the call. After the telephone screened a call, and is ringing and announcing the callers name, you can press OFF/CANCEL to mute the ringer, or press CALL BLOCK to reject the call directly. The callers number will be added to the block list. After you picked up a screened call and the telephone is announcing the screening options, you can OFF/CANCEL to hang up the call. The callers number will not be saved to the block list. press If Smart call blocker is on and you receive a call waiting call:

- After you have picked up a screened call, the telephone checks whether the call waiting number is in the directory, block list or allow list. It also checks whether the caller name is in the star name list. After that, The telephone then displays the caller ID information or Blocked call accordingly. You can press CALL BLOCK on the handset to block it.

- While the telephone is screening a call, the new call will be ignored and logged as missed call in the caller ID log. Robocalls are unable to respond to the screening announcement, and therefore, will not get through and ring. If you want to allow some robocalls to get through, save their names in the star name list. See page 55. The telephone can respond to remote access code while it is playing the screening announcement. This allows you to access your answering system from an unknown number remotely. See

on page 85.

/SPEAKER to take the new call, or press or 68 Smart call blocker Screen uncategorized calls Allow call once 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 1 to answer the call. The telephone number will not be added to your allow list. Always allow 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 2 to answer the call. The telephone number will be added to your allow list. 69 Smart call blocker Screen uncategorized calls Block call 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 3 or CALL BLOCK to block the call. The telephone plays the block announcement The number you are calling is not accepting your call. Please hang up. to the caller. The telephone number will be added to your block list. Send call to answering system 1. When the telephone starts ringing, and the screen displays or /SPEAKER to pick Screened call, press up the call. If you have turned on the caller ID announce feature, the telephone announces You have a call from... and the callers

To

. 2. Press 4 to forward the call to the answering system. Note: The call is forwarded to the answering system and the caller can leave a message even if the answering system is off. 70 Smart call blocker Option while on a call When you are on a call and speaking to the caller, and you do not want to continue the call, you can press the CALL BLOCK button on the handset to end the call. The telephone plays the block announcement The number you are calling is not accepting your call. Please hang up. to the caller, and the call will be terminated. The callers number will be added to your block list.

Press CALL BLOCK on the handset. The screen displays Block and end? and the callers number, if available. Press MENU/SELECT to end the call. Notes:

The callers number, if available, will be saved to the block list. The screen displays

after pressing CALL BLOCK on the handset. If callers number is not available, the screen displays . You can press CALL BLOCK on the handset to end the call even if Smart call blocker is turned off. 71 Answering system Answering system settings Use the answering system menu of a system handset to set up the announcement message, turn the answering system or message

of rings, remote access code or message recording time. Announcement Your outgoing announcement plays when calls are answered by the answering system. The telephone has a default outgoing announcement, Hello. Please

You can use this announcement, or record your own. To record a new outgoing announcement:

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press main menu. MENU/SELECT. 3. Press MENU/SELECT again to select Announcement. 4. Press MENU/SELECT to select Record annc. The system announces, Record after the tone. Press 5 when you are done. 5. Speak towards the handset to record your announcement. Press 5 to end recording. Your recorded announcement plays. To listen to the recorded announcement again, scroll to Play annc and press MENU/SELECT. To reset your outgoing announcement:

1. When the handset is in idle mode, press MENU/SELECT to enter the main menu. MENU/SELECT. 2. Press CID or DIR to scroll to Answering sys, then press 3. Press MENU/SELECT again to select Announcement. 4. Press CID or DIR to scroll to Reset annc, then press MENU/SELECT. The screen shows . 72 Answering system Answering system settings 5. Press MENU/SELECT

When your announcement is reset, the system answers calls with the default announcement described on this page. You cannot delete the default announcement.

By default, the answering system is on and ready to record

the answering system does not answer calls and record messages.

Using a cordless handset:

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Answer ON/OFF, then press main menu. MENU/SELECT. MENU/SELECT. 4. Press CID or DIR to choose On or , then press MENU/SELECT to save the setting. You hear a confirmation tone. When the answering system is on, the handset shows ANS ON. Using the telephone base:

Press /ANS ON/OFF to turn the answering system on or

is turned on, it announces, Calls will be answered. If the

it announces, Calls will not be answered. 73 Answering system Answering system settings Voice guide This feature is an alternative way for you to do the basic setup of the answering system. You can follow the voice guide to record your own announcement, set the number of rings, and set the message alert tone. This feature is only available on the cordless handset. 1. Press MENU/SELECT on the handset when it is not in use. 2. Press CID or DIR to scroll to Answering sys, then press MENU/SELECT. 3. Press CID or DIR to scroll to Voice guide, then press MENU/SELECT. You hear a voice prompt This voice guide will assist you with the basic setup of your answering system. 4. Setup your answering system by inputting the designated numbers as instructed in the voice guide. Notes:

CANCEL/OFF to quit the voice guide at anytime. You can press After a power outage, the handset prompts you to set the date and time, and Smart call blocker. After these settings are done or skipped, the handset prompts if you want to set up the answering system via . Press MENU/SELECT to start the setup. 74 Answering system Answering system settings Call screening Use this feature to choose whether incoming messages can be heard over the telephone base when they are being recorded. If you turn call screening on, you hear the incoming message. To change the setting:

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Ans sys setup, then press main menu. MENU/SELECT. MENU/SELECT. 4. Press MENU/SELECT to select Call screening. 5. Press CID or DIR to choose On or . 6. Press MENU/SELECT to save the setting.

there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges when calling from out of your local area. By default, the answering system

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Ans sys setup, then press 4. Press CID or DIR to scroll to , then press main menu. MENU/SELECT. MENU/SELECT. MENU/SELECT. 5. Press CID or DIR to choose among 2, 3, 4, 5, 6 or Toll saver. 6. Press MENU/SELECT to save the setting. 75 Answering system Answering system settings Remote access code To access your answering system remotely from any touch-tone phone, you need to enter a two-digit number (00-99). By default, the remote access code is 19. To change the remote access code:

1. When the handset is in idle mode, press MENU/SELECT to enter 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Ans sys setup, then press 4. Press CID or DIR to scroll to Remote code, then press the main menu. MENU/SELECT. MENU/SELECT. MENU/SELECT. 5. Use the dialing keys to enter a two-digit number. Press MUTE/DELETE to backspace and delete a digit. 6. Press MENU/SELECT to save the setting. Message alert tone When the message alert tone is set to On, and there is at least one new message, the telephone base beeps every ten seconds. By

There is no audible alert at the handset. To change the setting:

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Ans sys setup, then press 4. Press CID or DIR to scroll to Msg alert tone, then press main menu. MENU/SELECT. MENU/SELECT. MENU/SELECT. 5. Press CID or DIR to choose On or . 6. Press MENU/SELECT to save the setting. 76 Answering system Answering system settings Message recording time You can set the recording time allowed for incoming messages. The message length is three minutes by default. To change the setting:

1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys, then press 3. Press CID or DIR to scroll to Ans sys setup, then press 4. Press CID or DIR to scroll to Recording time, then press main menu. MENU/SELECT. MENU/SELECT. MENU/SELECT. 5. Press CID or DIR to to choose 3 minutes, 2 minutes or 1 minute, then press MENU/SELECT to save the setting. 77 Answering system About the answering system Answering system and voicemail indicators Your telephone has separate

types of voice messages:

answering system and those

providers voicemail (fees may apply). Your telephones built-

in digital answering system messages and voicemail messages are separate. Each alerts you to new messages

HANDSET 1 1 New message ANS ON 10:01AM 10/15

and XX New messages If show on the handset, there are new messages in the built-in answering system. To listen to messages recorded on your digital answering system, press telephone base page 82). If and New voicemail display on the handset, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, dial an access number provided by your telephone service provider, followed by a security code or PIN. Some telephone service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider.

/PLAY/STOP on the To use your voicemail service rather than the answering system,

rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. Note: After reviewing all new messages, the number of old messages appears on the message counter. 78 Answering system About the answering system Using the answering machine and voicemail together You can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers, as described below. To learn how to program your voicemail settings, contact your telephone service provider. If you are on a call, or the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your

the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting. Message capacity The answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to three minutes, and the maximum recording time is approximately 22 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them. Voice prompts The system provides voice prompts to guide you through the setup procedures on your handsets, message playback, remote access and recording outgoing announcements. The system also provides basic answering system setup via voice guide to record your own announcement, set the number of rings, and set the message alert tone. 79 Answering system About the answering system Call screening To screen a call at the telephone base:

If the answering system and call screening are on, the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system. Options while a message is being recorded:

Press VOLUME or VOLUME on the telephone base to adjust the call screening volume.

Press

Press

/PLAY/STOP to temporarily silence the call screening.

/PLAY/STOP to temporarily turn on the call screening if

To screen a call at the handset:

While a message is being recorded, the handset shows, To screen call, press [SELECT]. Press MENU/SELECT to screen the call. Options while a message is being recorded:

Press VOL CID or VOL DIR on the handset to adjust the call screening volume.

Press

Press MENU/SELECT to temporarily turn on the call screening if to temporarily silence the call screening.

Press /SPEAKER to broadcast the announcement and the incoming message through the speakerphone. Press again to turn

Call intercept While screening a call, you can stop recording and speak to the caller by pressing on the handset. 80 Answering system About the answering system

If the message alert tone is turned on, the telephone base beeps every ten seconds when there are new messages. Pressing any telephone base key (except message alert tone.

) temporarily silences the However, if you press a key at the telephone base to silence the message alert tone, the telephone base will also perform the corresponding key function. For example, if you press X/DELETE

there is a voice prompt directing you to press X/DELETE again to delete all old messages. The message alert tone is temporarily

X/DELETE a second time if you wish to erase all old messages in your answering system. The message alert tone resumes when you receive another message. 81 Answering system Message playback To listen to messages at the telephone base:

Press message playback.

/PLAY/STOP. Press

/PLAY/STOP again to end the To listen to messages on a cordless handset:

1. When the handset is in idle mode, press MENU/SELECT to enter the main menu. 2. Press MENU/SELECT again to select Play messages.

If there are new and old messages, press CID or DIR to select Play new msgs or Play old msgs, then press MENU/SELECT. If there are only new or only old messages, they will play automatically. Options during playback When messages are playing on the telephone base:

Press VOLUME+ or VOLUME- to adjust the message playback volume.

Press /SKIP to skip to the next message.

Press /REPEAT to repeat the message. Press twice to hear the previous message.

Press X/DELETE to delete the message.

/PLAY/STOP to stop playback.

Press When messages are playing on the handset:

Press VOL CID or VOL DIR to adjust the message playback

Press 6 to skip to the next message.

Press 4 to repeat the message. Press twice to hear the previous volume. message.

Press MUTE/DELETE to delete the message. to stop playback.

Press 5 or 82 Answering system Message playback handset mode.

Press /SPEAKER to switch between speakerphone mode and

Press to stop playback. The screen shows Call back?, then press MENU/SELECT or back the caller if the callers number is available. If the dialing format used is not correct, then use the following option to choose the correct dialing format before calling back the caller. to call

Press MENU/SELECT to pause playback and show the caller ID information if available. From here, you can press to resume playback, or press # (pound key) repeatedly to show the desired dialing option, then press MENU/SELECT to call back the caller. If you do not call back within ten seconds, message playback resumes automatically. or Delete all old messages To delete all old messages on the telephone base:

1. When the telephone is idle, press X/DELETE. The system announces, DELETE again. 2. Press X/DELETE again. The system announces, All old messages deleted. To delete all old messages on the handset:

1. Press MENU/SELECT when in idle mode to enter the main menu. 2. Press CID or DIR to scroll to Answering sys. Press MENU/SELECT. 3. Press CID or DIR to scroll to Delete all old, then press MENU/SELECT. The screen shows Delete all old messages?

4. Press MENU/SELECT again to confirm. 83 Answering system Recording and playing memos Memos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset. Play and delete them in the same way as incoming messages. Record a memo 1. When the handset is in idle mode, press MENU/SELECT to enter the 2. Press CID or DIR to scroll to Answering sys. Press main menu. MENU/SELECT. 3. Press CID or DIR to scroll to Record memo, then press MENU/SELECT. The system announces, Record after the tone. Press 5 when you are done. You can record a memo for up to four minutes. 4. Speak towards the handset to record a memo. 5. Press 5 to stop recording. The system announces, Recorded. The system does not save memos shorter than two seconds. Play back a memo Play memos the same way as messages. See Message playback on page 82. 84 Answering system Remote access You can reach your answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely reach your answering system:

1. Dial your telephone number from any touch-tone telephone. 2. When the system answers, enter the two-digit remote access code (19 is the default code. See page 76 to change it).

The system automatically announces the number of new or old messages (if any), and then begins to play them. 3. You can also enter the following remote commands:

Remote commands 1 2 3 33 4 5

*5 6

*7 8 0 Actions Press to listen to all messages. Press to listen to new messages only. Press to delete the current message (during playback). Press twice to delete all old messages. Press to repeat the current message (during playback). Press to stop any operation (including recording). Press to listen to a list of remote commands. Press to skip to the next message (during playback). Press to record a new announcement. Press to end remote access (the call will be terminated).

4. Hang up or press 8 to end the calls. 85 Appendix Adding and registering handsets/headsets/

speakerphones Your telephone can support up to 12 DECT 6.0 cordless handsets, headsets or speakerphones. You can purchase additional handsets

(AT&T model CL80119, sold separately) or up to 10 cordless handsets and two cordless headsets or speakerphones (sold separately). Visit www.telephones.att.com/accessories for a list of compatible DECT 6.0 cordless headsets or speakerphones. Each new handset, headset or speakerphone must be registered to the telephone base before use. You must register each handset, headset or speakerphone separately. To register a cordless headset or speakerphone to this telephone system, please refer to the corresponding users manual for details. To register a cordless handset, see below. The handsets provided within your product box are already registered as HANDSET 1, and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12). Register a handset to the telephone base 1. Before you begin registration, make sure the handset is out of the telephone base or charger and shows To register HS, see manual. 2. Put the handset you wish to register on the telephone base cradle. 3. The handset shows Registering... Please wait and the IN USE light on the telephone base turns on. HANDSET X Registered appears on the handset screen (HANDSET represents the handset name, X represents the handset number). The handset beeps and the IN USE registered with the telephone base. 86 86 Appendix Adding and registering handsets/headsets/

speakerphones For registration, put the handset on the telephone base, not the handset charger. If registration fails, the system will automatically try to register

appears on the screen for a few seconds, and then To register HS, see manual again from Step 1. 87 Appendix Deregistering handsets You may need to deregister your handsets if:

You have 12 registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your registered handsets.

handset you wish to use again, one at a time.

In addition to the cordless handsets, this operation will also deregister all cordless headsets or speakerphones registered to your telephone base. 1. Make sure that all handsets are out of the telephone base and chargers before you begin deregistration. 2. Press and hold FIND HS on the telephone base for about ten seconds (until the IN USE light

FIND HS. 3. Immediately press FIND HS again while the IN USE light is still

4. It takes up to ten seconds to complete the deregistration process. Before registering the handset again, wait for the cordless handset screen to display To register HS, see manual. 5. To register the handset(s) to the telephone base again, follow the registration instructions on the previous page. 88 Appendix Deregistering handsets Notes:

If the deregistration process fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handsets if any other system handset is in use. Even if the battery is depleted, you can still deregister the handsets by following the steps mentioned above. After the handset is charged for at least ten minutes, the screen shows To

. 89 Appendix Troubleshooting

suggestions. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. My telephone doesnt work at all.

Make sure the power cord is securely plugged in.

Make sure you plug the battery connector securely into the cordless handset.

into the telephone base and the telephone wall jack.

Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. See page 7 for details.

Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

You may need to purchase a new battery. Please refer to Battery installation and charging in this users manual on pages 7-8. The display shows No line. I cannot get a dial tone.

Try all the suggestions, as mentioned above.

If the previous suggestions do not work, disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone.

If there is no dial tone on that other telephone either, your telephone line cord may be defective. Install a new telephone line cord. If changing the telephone line cord does not help, the wall jack

(or the wiring to this wall jack) may be defective. Try using

CL82219/CL82229/CL82319/CL82419 telephone, or contact your telephone service provider (charges may apply). 90 Appendix Troubleshooting I cannot dial out.

Try all the suggestions, as mentioned above.

Make sure you have a dial tone before dialing. The cordless

and produce a dial tone. This is normal. Wait an extra second before dialing.

Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If

cordless handset before dialing, or dialing from another room with less background noise. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).

Make sure you plug the power cord securely into the telephone

outlet without a wall switch.

Move the cordless handset closer to the telephone base. You may have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. The batteries do not hold a charge.

Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 7 for details.

You may need to purchase a new battery. Please refer to Battery installation and charging in this users manual on pages 7- 8. 91 Appendix Troubleshooting I experience poor sound quality when using the handset speakerphone. For increased sound quality while using the handset speakerphone,

My caller ID isnt working.

Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone.

The caller may not be calling from an area that supports caller ID.

Both your and your callers telephone service providers must use

caller ID compatible equipment. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a

wall jack (page 5 problems resulting from DSL interference. Please contact your

System does not receive caller ID when on a call.

Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works

service, and if both telephone service providers use compatible equipment. I get noise, static, or weak signals even when Im near the telephone base.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a

wall jack (page 5 problems as a result of DSL interference. Please contact your

You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed. 92 Appendix Troubleshooting

Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or a surge protector,

location. If this does not solve the problem, relocate your phone

surge protector.

Move your phone to a higher location. The phone may have better reception in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).

System screens all my incoming calls.

You may have set Smart call blocker to screen calls without numbers and uncategorized calls. The telephone asks callers to announce their names or press the pound key (#). We recommend that you add the phone numbers of your family members and friends, and desired businesses to your Directory

(see page 30) or Allow list (see page 50), or add their names to the Star name list (see page 55). This will avoid Smart call blocker to screen their calls.

on page 41. While screening a call, the telephone suddenly stops screening and connects to the call.

Another handset may have picked up the screening call.

If you have other telephone system sharing the same telephone line, and someone picks up the call on the other telephone system while the screening is in progress, the screening process will be terminated and connect you to the caller. 93 Appendix Troubleshooting

You may have saved the callers number in your block list. To remove the number from the block list, see Delete a block entry on page 49. Blocking calls with numbers saved in my block list only. If you want to block calls with numbers saved in your block list only, and allow all other calls to get through to you, change the settings to accept calls without numbers and uncategorized calls. See Control calls without numbers on page 41 and Control uncategorized calls on page 44. Blocking all unknown calls. If you want to block all unknown calls with numbers or names that are not in your directory, allow list or star name list, change the settings to block calls without numbers and uncategorized calls. See Control calls without numbers on page 41 and Control uncategorized calls on page 44. Forwarding all unknown calls to the answering system. If you want to forward all unknown calls with numbers or names that are not in your directory, allow list or star name list to the answering system, see Control calls without numbers on page 41 and Control uncategorized calls on page 44 to change the settings. Ive set my LCD language to Spanish or French and I dont know how to change it back to English.

Press MENU/SELECT on your handset in idle mode, then enter 364# 94 Appendix Troubleshooting I cannot retrieve voicemail messages.

Your telephone has both a built-in answering system and voicemail indication. They are independent features and each

voicemail service from your telephone service provider, contact your telephone service provider for more information on how to access your voicemail.

Make sure that the answering system is on. ANS ON should show on the handset and the /ANS ON/OFF light on the telephone base should be on. If toll saver is activated, the number of rings changes to two when you have new messages stored.

system used by your telephone service provider. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail. To determine how many rings activate your voicemail, contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.

95 Appendix Maintenance

Your cordless telephone contains sophisticated electronic parts, so you must treat it with care.

Avoid rough treatment.

Place the handset down gently.

Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water

You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone

Your telephone has a durable plastic casing that should retain

dampened with water or mild soap.

Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords. 96 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this users manual. Always follow basic safety precautions when using this product to reduce

the product.

Read and understand all instructions in the users manual. Observe all markings on

Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.

Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. In an inadequately ventilated environment, the user should not plug the phone into a power outlet, nor put a

or explosion. Such environments may include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.

Do not use this product near water or when you are wet. For example, do not use it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink, and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.

Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, see the Troubleshooting section on pages 90-95 of this users manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 107-109. Do not open this product except as directed in your users manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.

Replace batteries only as described in your users manual (pages 7-8). Do not burn or puncture batteries they contain caustic chemicals.

mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 97 Appendix Important safety information Cautions:

Use only the power adapters provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Dispose of used batteries according to the instructions. Especially about cordless telephones

Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged,

Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless

interference.

Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. 98 Appendix Important safety information The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1-800-8-BATTERY for locations accepting spent Ni-MH batteries. RBRC and 1-800-8-BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation.

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base. Especially about telephone answering systems

party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation. SAVE THESE INSTRUCTIONS 99 Appendix For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de scurit importantes Ce symbole vous alertera dinformations importantes ou dinstructions dentretien pouvant apparatre dans ce guide dutilisation. Respectez toujours les mesures de scurit et de scurit de base lorsque vous utilisez ce produit, afin de rduire les risques de blessures, dincendie, ou dlectrocution.

Veuillez lire et comprendre toutes les instructions de ce guide dutilisation. Relectez toutes les inscriptions apparaissant sur le produit.

vitez dutiliser le tlphone pendant un orage. Il pourrait y avoir un faible risque dlectrocution.

Nutilisez pas un tlphone prs dune fuite de gaz. Dans certaines circonstances,

prise de courant, ou lorsque le combin est dpos sur son chargeur. Ceci est un vnement frquent associ avec la fermeture dun circuit lectrique. Lutilisateur ne devrait pas brancher un tlphone dans une prise de courant, et ne devrait pas dposer un combin charg dans le chargeur, si le tlphone se trouve dans

des gaz industriels (dissolvants de nettoyage, des vapeurs de gazoline, etc.), une fuite de gaz naturel, etc.

Nutilisez pas ce produit prs de leau ou lorsque vous tes mouills. Par exemple, ne lutilisez pas dans des sous-sols humides ou sous la douche, ou prs dune piscine, dun bain, dun vier de cuisine, ou dune cuve de lavage. Nutilisez pas de liquides, ou de vaporisateurs arosol de nettoyage. Si le

tlphonique ou le cordon dalimentation. Ne rebranchez pas le produit avant quil soit compltement sec.

les cordons dalimentation ou la ligne tlphonique. Protgez les cbles contre les dommages ou labrasion. 100 Appendix For C-UL compliance

Si le produit ne fonctionne pas correctement, consultez la section Dpannage

(Troubleshooting) des pages 90-95 de ce guide dutilisation. Si vous ne pouvez pas rgler le problme, ou si le produit est endommag, consultez la section Garantie limite (Limited warranty) des pages 107-109. Nouvrez pas ce produit, sauf tel quindiqu dans le guide dutilisation. Louverture du

dangereuses ou autres dangers.

Remplacez les piles uniquement tel que dcrit dans votre guide dutilisation

(pages 7-8). Nincinrez pas et ne percez pas les piles elles contiennent des produits chimiques caustiques.

Les adaptateurs secteurs sont conus pour tre orients verticalement ou installs sur le plancher. Les broches ne sont pas conues pour se maintenir en

ou sous une armoire. MISES EN GARDE:

Nutilisez que les adaptateurs inclus avec ce produit. Pour obtenir une pice de rechange, visitez notre site Web au www.telephones.att.com ou composez le 1-800-222-3111. Au Canada, composez le 1-866-288-4268.

Nutilisez que la pile de rechargeable incluse ou une pile de rechange (modle BT183342/BT283342). Pour commander, visitez notre site Web www.telephones.att.com ou composez le 1-800-222-3111. Au Canada, composez le 1-866-288-4268.

une pile du mme type. Jetez les piles puises en respectant les instructions.

si pratiques crent galement des restrictions. Les appels tlphoniques sont transmis entre le socle du tlphone et le combin par le biais dondes radio, et il se peut que vos conversations tlphoniques soient interceptes par dautres quipements de rception dondes radio au sein de la porte du tlphone sans

cordon. 101 Appendix For C-UL compliance

une prise de courant lectrique fonctionnelle. La prise lectrique ne doit pas tre

partir du combin si la base nest pas branche, si elle est hors fonction ou si le courant lectrique est coup.

fonctionnent sur des frquences pouvant causer des interfrences aux tlviseurs et magntoscopes. Pour rduire ou prvenir de tels parasites,

parasites.

mtallique de nickel. Usez de prudence lorsque vous manipulez de telles piles et

Respectez la polarit adquate entre les piles et le chargeur de piles.

scuritaire. Nincinrez pas et ne peercez pas les piles. Comme pour les autres

corporelles. Le sceau de lorganisme de recyclage RBRCMD sur les piles lhydrure

volontairement au programme industriel visant reprendre et recycler ce type de piles lorsquelles ne servent plus, au sein du territoire des tats-Unis et du Canada. Vous devez apporter ces piles chez un dtaillant participant ou le centre de recyclage le plus prs de chez vous. Ou vous pouvez composer le 1-800-8-BATTERYMD endroits qui acceptent les piles lhydrure mtallique de nickel mortes. RBRCMD et 1-800-8-BATTERYMD sont des marques dposes de Rechargeable Battery Recycling Corporation. 102 Appendix For C-UL compliance Mesures prventives pour les utilisateurs de stimulateurs cardiaques implants dans lorganisme

indpendante, a men une valuation pluridisciplinaire des interfrences entre

lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-

Avis aux dtenteurs de stimulateurs cardiaques

stimulateur cardiaque.

cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en fonction.

direction oppose au stimulateur cardiaque.

proximit de ceux-ci. Mode ECO Lorsque le socle communique avec le combin, le mode ECO sera activ automa-

tiquement. Ceci rduit la consommation dnergie selon la distance entre le socle du tlphone et le combin.

Enregistrement deux voies : Cet appareil nmet pas de bips davertissement qui permettent de prvenir lautre partie que vous enregistrez la conversation. Pour assurer votre conformit aux rglements fdraux ou provinciaux en rapport avec les enregistrements des conversations tlphoniques, vous devriez informer lautre partie lorsque vous activez lenregistrement. CONSERVEZ CES INSTRUCTIONS 103 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on

service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US:

telephone service provider. This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what

installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not

correct the problem and the telephone service provider is required to inform you of

proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency

emergency numbers, please:

104 Appendix FCC Part 68 and ACTA Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone.

The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not

This product meets the applicable Innovation, Science and Economic Development

105 Appendix FCC Part 15 NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm

(8 inches) or more. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B) 106 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. 1. What does this limited warranty cover?

The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (CONSUMER or you) that the product and all accessories provided in the sales package (PRODUCT) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. 2.

PRODUCT)?

During the limited warranty period, the manufacturers authorized service representative will repair or replace at the manufacturers option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturers option, is your exclusive remedy. The manufacturer will return repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. 3. How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer. 107 Appendix Limited warranty 4. What is not covered by this limited warranty?

This limited warranty does not cover:

PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling,

anyone other than an authorized service representative of the manufacturer;

or

PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or

PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or

PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or

PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or

PRODUCT returned without valid proof of purchase (see item 6); or

Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 5. How do you get warranty service?

To obtain warranty service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. NOTE: Before calling for service, please review the users manual; a check of the PRODUCTs controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 108 Appendix Limited warranty 6. What must you return with the PRODUCT to get warranty service?

You must:

Return the entire original package and contents including the PRODUCT to

and

Include a valid proof of purchase (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and

Provide your name, complete and correct mailing address, and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturers responsibilities regarding the PRODUCT. There are no other

you may also have other rights which vary from state to state or province to province.

use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including,

associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

109 Appendix

Operation Talk time (cordless handset) Operating time*

Up to 7 hours Talk time (cordless handset speakerphone) Up to 5 hours Standby Up to 5 days

* Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology

clarity. This is achieved through a unique antenna design and advances in noise-

products perform up to 45% better in range competitions against similarly equipped phones of the leading competition. Now, calls can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over a certain distance which can vary with the locations of the

This telephone base comes with an antenna which gives much better clarity and covers a longer range than before. HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio. It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio.

The simulated full-duplex speakerphone on your handset allows both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage.

interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. The ENERGY STAR program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY

110 B C D Index Index A Allow list 50 Announcement 72 Answering system 7284 Battery charging 8 Battery installation 7, 89 Block list 45 Caller ID announce handset 14 Caller ID (CID) add entries to phone directory 35 dial entries 35 review entries 34 Charger installation 5, 6 Clear voicemail indication 16 Clock 13 from a record in the caller ID Day and time 13 Delete a directory entry 31 Dialing log 35 Directory edit entries 32 name search 31 new entries 30 review entries 31 DSL 5, 11 Ending a call 20 Handset handset locator 22 quick reference guide 13 ringer tone 12 ringer volume 12 voicemail indicator 16 HD audio 110 Important safety information 9799 Intercom 2526 Last number redial 21 LCD language 14 Limited warranty 107109 E H I L M Maintenance 96 Making calls 20 Message alert tone 76 playback 8283 Mute 21 111 O P Q R S Index Index N Names enter into directory 30 search 31 Outgoing announcement 72 Paging tone 22 Power adapter 6 Push-to-talk 2729

41 uncategorized calls 40 Speakerphone 20 Speed dial check voicemail 33 make a call 33 set voicemail number 15 Star name list 55

110 Time 13 Troubleshooting 9095 Quick reference guide 13 Unwelcome calls 38 Receiving calls 20 Recharging 8 Redial 21 Remote access 85 Ring tone options 12 Safety information 9799 Smart call blocker 3770 allow calls 39 block calls 39 calls without numbers 40 screen calls without numbers 64 screening announcement 58 screen uncategorized calls 67

4142 112 Visual message waiting indicator 16 Voice announce caller ID 14 Voice guide 10, 74 Voicemail 15, 78 quick acess 15, 33 Volume control handset 12, 21, 82 telephone base 21, 82 Wall mount installation 11 Warranty 107109 Welcome calls 38 T U V W For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. For customer service or product information, please visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2018 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. QaltelTM is a trademark of Truecall Group Limited. RBRC and 1-800-8-BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation. Printed in China. Issue 1.0 AT&T 12/18.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VTech Telecommunications Ltd

Jul. 20, 2021

To whom it may concern,

Request for Permanent Confidentiality

Under FCC Part 15 Certification

FCC ID: EW780-9867-00

Request is hereby submitted by VTech Telecommunications Ltd. to withhold

permanently from public review certain portions of the application for equipment

certification for the referenced FCC identifiers. This request for confidentiality is

made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the

following sections of the application are to be kept permanently confidential and

VTech Telecommunications Ltd. reserves the right to discern which parties can

obtain access to these information:

 Schematics

 Detailed Block diagrams

 Detailed Operational/Functional Description

The rationale for request for confidentiality is as followings:

This information represents intellectual property of VTech Telecommunications Ltd.

and it is subject to competition. We have invested considerable time and materials in

research and development to produce the referenced product. Disclosure of the

permanently confidential portions of this application to competitors would not only

give them significant competitive advantages in developing similar products, but

would also disclose successful implementation of unpublished, leading edge

technology developed by us.

If you have questions or need further information, please contact the undersigned.

Regards,

Michael Tsui

Approbation Supervisor



 

 

 

 

 

 

Appendix B1

Letter of Agency for FCC Certification

July 22, 2021

To whom it may concern,

Letter of Agency

I, an officer of VTech Telecommunications Limited do hereby

authorize Intertek Testing Services (Mr. Kenneth Wong / Ms. Jess Tang)

to act on our behalf in front of the Federal Communications Commission

with respect to all matters relating to certification of equipment under Part

15 and/or Part 95 of the FCC Rules until further notice.

I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to

this application, including myself, is subject to a denial of federal benefits,

that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug

Abuse Act of 1988, 21 U.S.C., 862.

Regards,

Michael Tsui

Approbation Supervisor



 

 

VTech Telecommunications Ltd

Jul.15, 2021

Purpose of Change—handset

Dear Sir/Madam:

Re: Application for a Permissive Change Filing with FCC ID: EW780-9867-00

The purpose of this document is to describe all the changes that are made on new model CL82XY9 from the

original model CL82215 in order to meet the requirements.

1. External appearance is different

2. Add brand “High Power” battery vendors.

3. Add the Constant current circuits on HS baseband

4. Changes of Handset RF circuit to reduce the cost.

CL82XY9

CL82215

change the size from 0402 to 0201 for C453, C457, C466, C470, C472, C473, C450, C451 'C430, C440, but value

keeps the same.

5. Handset RF IC is changed from DCX79VT213GS3ANC to

DCX79VT214HS3ANC,

Refer to DCX79 technical spec, the different is

3G - memory size is "3" for 256KB ROM , Mask version is G.

4H - memory size is "4" 320KB ROM, Mask version is H.

but all RF part are the same



VTech Telecommunications Ltd

CL82XY9

6. RF components value changes to match the RF IC change

CL82215

Similarities of Unit between the original model to the new model:

• No change in radio parameters has occurred.

• RF IC architecture & functional blocks is the same

• The line interface performance is the same

• RF conducted and radiated emission level is similar.

.

Sincerely,

Michael Tsui

Approbation Supervisor