FCC ID: EW780-9454-00 DECT 6.0 Cordless Telephone

by: VTech Telecommunications Ltd latest update: 2014-03-18 model: 80-9454-00

Two grants have been issued under this FCC ID on 03/18/2014 (this is one of twenty-nine releases in 2014 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked troubleshooting guides, password defaults, drivers, instructions, & warrantee terms.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies			exhibits	applications
		manuals

all exhibits 13
1 ~ 2014-03-18 12
2 ~ 2014-03-18 12

app s				submitted / available
1 2	User Manual Part I	Users Manual	pdf	5.48 MiB	/ February 05 2014
1 2	User Manual Part II	Users Manual	pdf	3.16 MiB	/ February 05 2014
1 2		Cover Letter(s)	pdf
1 2		External Photos	pdf		/ February 05 2014
1 2		ID Label/Location Info	pdf
1 2		Internal Photos	pdf		/ February 05 2014
1 2		Cover Letter(s)	pdf
1 2		Cover Letter(s)	pdf
1 2		RF Exposure Info	pdf
1 2		Test Setup Photos	pdf		/ February 05 2014
1 2		Test Report	pdf
1 2		Attestation Statements	pdf
1 2		RF Exposure Info	pdf

exhibit
download
text

1 2

User Manual Part I

Users Manual

pdf

5.48 MiB

/ February 05 2014

Complete users manual CL83214/CL83314/CL83414/

DECT 6.0 cordless telephone/

answering system with caller ID/call waiting Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 122-124 of this manual. Please thoroughly read this users manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. This telephone meets the California Energy Commission regulations for energy consumption. Your telephone is set up to comply with the energy-conserving standards right out of the box. No further action is necessary. This telephone system is compatible with certain AT&T DECT 6.0 cordless headsets and speakerphones. Visit www.telephones.att.com/headsets for a list of compatible cordless headsets. Model number: CL83214 (two handsets) Type:

Serial number:

Purchase date:

Place of purchase:

CL83314 (three handsets) CL83414 (four handsets) DECT 6.0 cordless telephone/answering system with caller ID/call waiting Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. Compatible with Hearing Aid T-Coil T TIA-1083 The ENERGY STAR program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR label indicating it meets the latest energy efficiency guidelines. 2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Abridged users manual CL83214/CL83314/CL83414/

DECT 6.0 cordless telephone/

answering system with caller ID/call waiting Abridged Users manual Quick start guide CL83214/CL83314/CL83414 This quick start guide provides you with basic instructions only. For more complete instructions, refer to your Abridged users manual provided in the package, or see the online Complete users manual at www.telephones.att.com/manuals. Telephone base installation Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch. Charger installation Plug one end of the telephone line cord into a telephone jack or a DSL filter. Plug the power adapter into a power outlet not controlled by a wall switch. Route the power adapter cord through this slot. Raise the antenna. If you have DSL high-speed Internet service, a DSL filter

(not included) is required. Route the telephone line cord through this slot. Plug the power cord and the telephone line cord into the jacks. Caution: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Quick start guide Cordless handset

(2 for CL83214)

(3 for CL83314)

(4 for CL83414) B a t t e r y P a c k

l B o c

p i l e s

W A R N N G I

I A V E R T S S E M E N T

B T 1 8 3 3 4 2 B T 2 8 3 3 4 2

(

. 4 V 4 0 0 m A h N i

M H

) D O N O T B U R N O R P U N C T U R E B A T T E R E S I N E P A S I I N C N R E R O U P E R C E R L E S P L E S I

. M a d e i n C h n a i

F a b r i q u e n c h n e i C R 1 3 4 9 I I T H S S D E U P

C E C T V E R S L E H A U T Telephone base Charger for cordless handset with power adapter installed

(1 for CL83214)

(2 for CL83314

(3 for CL83414) Battery for cordless handset

(2 for CL83214)

(3 for CL83314)

(4 for CL83414) Battery compartment cover

(2 for CL83214)

(3 for CL83314)

(4 for CL83414) Telephone line cord Power adapter for telephone base Complete users manual CL83214/CL83314/CL83414 DECT 6.0 cordless telephone/

answering system with caller ID/call waiting Table of contents Getting started Quick reference guide - handset ........ 1 Quick reference guide - telephone base ............................................................. 4 Installation ..................................................... 7 Telephone base and charger installation ............................................... 8 Telephone base installation ............ 8 Charger installation ............................. 8 Battery installation and charging ....... 9 Installation options ................................. 11 Tabletop to wall mount installation.......................................... 11 Wall mount to tabletop installation.......................................... 12 Telephone settings Handset settings ...................................... 13 Ringer volume ..................................... 14 Ringer tone ........................................... 14 Set date/time ...................................... 15 LCD language ...................................... 16 Caller ID announce ........................... 17 Set speed dial voicemail number ................................................. 18 Voicemail (visual message waiting) indicator ............................ 18 Clear voicemail indication ............. 19 Rename handset ................................ 20 Key tone ................................................. 20 Use caller ID to automatically set date and time ........................... 21 Home area code ................................. 21 Dial mode .............................................. 22 Web address ........................................ 22 QUIET mode ......................................... 23 Telephone base settings ...................... 24 Ringer volume ..................................... 25 Ringer tone ........................................... 25 Set date/time ...................................... 26 LCD language ...................................... 27 Caller ID announce ........................... 28 Set speed dial voicemail number ................................................. 29 Voicemail (visual message waiting) indicator ............................ 29 Clear voicemail indication ............. 30 Rename base ....................................... 31 Key tone ................................................. 31 Use caller ID to automatically set date and time ........................... 32 Home area code ................................. 32 Dial mode .............................................. 33 Web address ........................................ 33 Telephone operation Telephone operation.............................. 34 Making a call ........................................ 34 On hook dialing (predialing) ........ 34 Answering a call ................................ 34 Ending a call ........................................ 35 Auto off .................................................. 35 Temporary ringer silencing ........... 35 Handset speakerphone ................... 36 Last number redial ............................ 36 Equalizer ................................................. 38 Options while on calls .......................... 39 Volume control ................................... 39 Call waiting ........................................... 39 Mute ......................................................... 40 Chain dialing ........................................ 41 Temporary tone dialing .................. 43 Blind transfer ....................................... 43 Multiple handset use Multiple handset use ............................. 45 Handset locator .................................. 45 Join a call in progress ..................... 45 Intercom ....................................................... 46 Answer an incoming call during an intercom call .............................. 48 Call transfer using intercom .............. 49 Push-to-talk (PTT) ................................... 50 Turn PTT on or off ............................. 50 PTT call to a single device ............ 51 PTT call to multiple devices ......... 53 Answer a PTT call .............................. 55 Change a one-to-one PTT call to an intercom call ........................ 56 Answer an incoming call during a PTT call ............................................ 56 Make an outgoing call during PTT call ................................................ 57 End or leave a PTT call ................... 57 Directory About the directory ................................ 58 Shared directory ................................. 58 Capacity .................................................. 58 Create directory entries ....................... 59 Create a new directory entry ...... 59 Add a predialed telephone number to the directory .............. 60 Review the directory .............................. 61 Review directory entries ................ 61 Search by name.................................. 62 Dial, delete or edit directory entries ..................................................... 63 Display dial ........................................... 63 Delete a directory entry ................. 63 Edit a directory entry ....................... 64 Speed dial ................................................... 65 Assign a speed dial number......... 65 Assign your voicemail speed dial number ....................................... 66 Reassign a speed dial number .... 66 Delete a speed dial number......... 67 Make a call using speed dial ....... 67 Check your voicemail using speed dial ........................................... 67 Caller ID About caller ID ......................................... 68 Information about caller ID with call waiting .............................. 68 Caller ID history ....................................... 69 How the caller ID history

(caller ID log) works ...................... 69 Missed (new) call indicator ........... 69 Caller ID operation ................................. 70 Memory match .................................... 70 Review the caller ID log ................. 71 View dialing options ......................... 72 Dial a caller ID log entry ............... 72 Delete caller ID log entries .......... 72 Save a caller ID log entry to the directory ...................................... 73 Reasons for missing caller ID information ........................................... 74 Call block Call block .................................................... 75 Add a call block entry ..................... 76 Review the call block list .............. 77 Save a caller ID log entry to call block list ..................................... 77 Edit a call block entry ..................... 78 Delete a call block entry ............... 79 Block calls without number ......... 79 Answering system Answering system settings ................. 80 Announcement ................................... 80 Answer on/off ..................................... 83 Voice guide ........................................... 84 Call screening ...................................... 85 Number of rings ................................. 86 Remote access code ........................ 87 Message alert tone ........................... 88 Message recording time ................. 89 About the answering system............. 90 Answering system and voicemail indicators ....................... 90 Using the answering machine and voicemail together ............... 91 Message capacity .............................. 91 Voice prompts ..................................... 92 Call screening ...................................... 92 Call intercept ....................................... 93 Base ringer ........................................... 93 Temporarily turning off the message alert tone ........................ 93 Message playback ................................... 94 Options during playback ................ 95 Delete all old messages ................. 97 Recording and playing memos ......... 98 Record a memo .................................. 98 Play back a memo ............................ 99 Base message counter displays .....100 Message counter displays ...........100 Remote access ........................................101 Appendix Adding and registering handsets/

headsets/speakerphones ............103 Register a handset to the telephone base ..............................103 Deregistering handsets ......................105 Deregister all handsets from the telephone base .....................105 Alert tones and lights .........................106 Handset screen icons ....................106 Telephone base screen icons ....106 Handset alert tones ........................107 Telephone base alert tones ........107 Lights .....................................................108 Screen display messages ..................109 Screen messages .............................109 Troubleshooting .....................................112 Maintenance.............................................121 Important safety information ..........122 Safety information ...........................122 Especially about cordless telephones .......................................123 Precautions for users of implanted cardiac pacemakers ... 124 Pacemaker patients ........................124 ECO mode ...........................................124 Especially about telephone answering systems .......................124 FCC Part 68 and ACTA........................125 FCC Part 15 ..............................................126 California Energy Commission battery charging testing instructions .........................................127 Limited warranty ....................................128 Technical specifications .....................130 DECT 6.0 digital technology .......130 Telephone operating range ........130 Redefining long range coverage and clarity....................130 HD audio ..............................................130 Simulated full-duplex handset and base speakerphones ..........130 Index Index ............................................................131 Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the telephone base or charger. qCID/VOLUME Press qCID to show caller ID log when the handset is not in use (page 71). Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left. Press to decrease the listening volume when on a call (page 39), or to decrease the message playback volume (page 96). REDIAL/AUE Press repeatedly to view the last ten numbers dialed (page 36). While entering numbers, press and hold to insert a dialing pause (page 59). HONE/FLAH Press to make or answer a call (page 34). During a call, press to answer an incoming call when you receive a call waiting alert (page 39). During message playback, press to call back the caller if the callers number is available (page 96). 1 While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. Press and hold to set (page 18) or to dial your voicemail number (page 67). TONE /a>A Press to switch to tone dialing temporarily during a call if you have pulse service (page 43). While entering names, press to change the next letter to upper or lower case.

/EAER EAER Press to make or answer a call using the speakerphone (page 34). Press to switch between the speakerphone and the handset (page 36). 1 Getting started Quick reference guide - handset pDIR/VOLUME Press pDIR to show directory entries when the handset is not in use (page 61). Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call

(page 39), or to increase the message playback volume

(page 96). MENU/ELECT When the handset is not in use, press to show the menu. While in the menu, press to select an item or save an entry or setting. OFF/CANCEL During a call, press to hang up (page 35). While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display, or press and hold this button to exit to idle mode. When the handset is ringing, press to mute the ringer temporarily (page 35). Press and hold while the telephone is not in use to erase the missed call indicator. QUIET# (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 72). Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 23). MUTE/DELETE During a call, press to mute the microphone (page 40). When the handset is ringing, press to mute the ringer temporarily (page 35). While reviewing the caller ID log, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or the recorded announcement. EQ During an outside call, intercom call, message or announcement playback, press to change the audio quality to best suit your hearing (page 38). 2 Getting started Quick reference guide - handset Handset side view UH TO TAL Press to initiate a one-to-one (page 51) or one-to-group broadcast (page 53). Press and hold to broadcast to a group of system devices (page 53). Main menu The > symbol highlights a menu item.

>Play messages Answering sys Main menu Play messages (page 94) Answering sys (page 80) Directory (page 58) Caller ID log (page 68) Intercom (page 46) Ringers (page 14) Set date/time (page 15) Settings (page 16) Web address (page 22) Using menus:

Press MENU/ELECT to show the menu. Press qCID or pDIR to scroll through menu items. Press MENU/ELECT to confirm or save changes to a highlighted menu item. Press OFF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. 3 Getting started Quick reference guide - telephone base CANCEL qCID While in a menu, press to cancel an operation, back up to the previous menu or exit the menu display. Press and hold to go back to idle mode. When the telephone base is ringing, press to mute the ringer temporarily. Press to display the caller ID log when the phone is not in use. Press to scroll down while in menus and lists. While entering names or numbers, press to move the cursor to the left. pDIR MENU/ELECT When the telephone base is not in use, press to show the menu. While in the menu, press to confirm or save an entry or setting. Press to display the directory when the phone is not in use (page 61). Press to scroll up while in menus and lists. While entering names or numbers, press to move the cursor to the right. FLAH During a call, press to answer an incoming call when you receive a call waiting alert. IN UE light On when the telephone is in use, or when the answering system is answering an incoming call. On when a handset is being registered. Flashes when there is an incoming call or when all handsets are being deregistered. Flashes when another telephone is in use on the same line. 1 Press and hold to set (page 29) or to dial your voicemail number (page 67).

/HANDET LOCATOR While the phone is idle, press to page all handsets (page 45). REDIAL/AUE Press repeatedly to view the last 10 numbers dialed (page 37). While entering numbers, press and hold to insert a dialing pause. q/VOLUME/p During message playback or call screening, press to adjust the listening volume (page 96 or page 92). While in idle mode, press to adjust the base ringer volume. When on a call, press to adjust the listening volume. MIC Microphone TT Press to initiate a one-to-one (page 52) or one-to-group broadcast

(page 54). Press and hold to broadcast to a group of system devices (page 54). 4 Getting started Quick reference guide - telephone base

/RECORD Press to record a memo (page 99) or an announcement

(page 81).

/REEAT During playback, press to repeat the playing message (page 95). During playback, press twice to play the previous message (page 95).

/I Press to skip a message (page 95).

/LAY/TO Press to start or stop message playback (page 95). X/DELETE While reviewing the caller ID log, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or announcement. Press twice to delete all old messages when the phone is not in use.

/AN ON/OFF Press to turn the built-in answering system on or off

(page 83). MUTE During a call, press to mute the microphone

(page 40). When the phone is ringing, press to mute the ringer temporarily.

/EAER Press to make or answer a call using the speakerphone. 5 Getting started Quick reference guide - telephone base Main menu The > symbol highlights a menu item.

>Play messages Answering sys p q Main menu Play messages (page 94) Answering sys (page 80) Directory (page 58) Caller ID log (page 68) Call block (page 75) Intercom (page 46) Ringers (page 25) Set date/time (page 26) Settings (page 27) Web address (page 33) Using menus:

Press MENU/ELECT to show the menu. Press qCID or pDIR to scroll through menu items. Press MENU/ELECT to confirm or save changes to a highlighted menu item. Press CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. 6 Getting started Installation You must install and charge the battery before using the telephone. TO!

See pages 9-10 for easy instructions. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 11). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see the following page). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with protective stickers covering the handset and telephone base displays - remove them before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or workbench. 7 Getting started Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 11 for details. Telephone base installation Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch. Raise the antenna. Route the power adapter cord through this slot. Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base. Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter

(not included) is required. Route the telephone line cord through this slot. Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base. Charger installation Plug the power adapter into a power outlet not controlled by a wall switch. IMORTANT INFORMATION Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 8 Getting started Battery installation and charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after ten hours of continuous charging. See the table on page 130 for battery operating times. If the screen shows lace in charger and flashes, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take. Battery indicators Battery status Action The screen is blank, or shows lace in charger and (flashing). Battery has no or very little charge. The handset cannot be used. Charge without interruption

(at least 30 minutes). The screen shows Low battery and

(flashing). The screen shows HANDET X. Battery has enough charge to be used for a short time. Charge without interruption

(at least 30 minutes). Battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use. NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute. tep 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THI IDE U facing up as indicated. 9 T U A H E L S R E V T C E C

I P U E D S S H T I T U A H E L S R E V T C E C

I P U E D S S H T I

. I S E L P S E L R E C R E P U O R E R N C N I I S A P E N

. I S E R E T T A B E R U T C N U P R O N R U B T O N O D i e n h c n e u q i r b a F

i a n h C n i e d a M

) H M

i N h A m 0 0 4 V 4

. 2

(

2 4 3 3 8 2 T B 2 4 3 3 8 1 T B

T N E M E S S T R E V A I

I G N N R A W

s e l i p

c o B l

k c a P y r e t t a B tep 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. I S E L P S E L R E C R E P U O R E R N C N I I S A P E N I S E R E T T A B E R U T C N U P R O N R U B T O N O D i e n h c n e u q i r b a F i

a n h C n i e d a M

) H M

i N h A m 0 0 4 V 4

. 2

(

2 4 3 3 8 2 T B

2 4 3 3 8 1 T B

T N E M E S S T R E V A I

I G N N R A W

s e l i p

c o B l

k c a P y r e t t a B Getting started Battery installation and charging CHARGE light tep 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the handset is on during charging. After you install your telephone or power returns following a power outage, the handset and telephone base will prompt you to set the date and time. For instructions, see et date/time on page 15 or page 26. To skip setting the date and time, press OFF/CANCEL on the handset or CANCEL on the telephone base. After the date and time setting is done or skipped, the telephone base will prompt if you want to set up the answering system. Press MENU/ELECT to start the answering system setup via voice guide. For more details, see Voice guide on page 84. To skip the setup, press CANCEL on the telephone base. SET DATE MM/DD/YY SET TIME HH:MM --

Voice guide to set up Ans sys?

IMORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT183342/

BT283342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage. 10 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow the steps below to connect the telephone base with a standard dual-stud telephone wall mounting plate. You may need a professional to install the mounting plate. Tabletop to wall mount installation 1. Unplug the power adapter from the power outlet. Unplug the telephone line cord from the wall jack (or DSL filter). 2. Press down on the tabs on the wall mount bracket on the telephone base to release it from tabletop orientation. 3. Swivel the wall mount bracket down to wall mount position and push it into the telephone base until it clicks into place. 4. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. Align the holes on the back of the telephone base with the wall mounting plate. 5. Slide the telephone base down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties. 1 2 3 4 5 11 Getting started Installation options Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. Push the telephone base up to remove it from the wall. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet. 2. Swivel the wall mount bracket up to tabletop position and push it into the telephone base until it clicks into place. 3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. Bundle the telephone line cord and power adapter cord neatly with twist ties. 1 2 3 12 Telephone settings Handset settings Use the menu to change the telephone settings. 1. Press MENU/ELECT on the handset when it is not in use to enter the main menu. 2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item. 3. Press MENU/ELECT to select the highlighted item.

>Play messages Answering sys NOTE: Press OFF/CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and hold OFF/CANCEL to return to idle mode. 13 Telephone settings Handset settings Ringer volume You can set the ringer volume level to one of six levels or turn the ringer off. When the ringer is off, the screen. appears on 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press MENU/ELECT. 3. Press MENU/ELECT again to select Ringer volume. 4. Press qCID or pDIR to sample each volume level. 5. Press MENU/ELECT to save your preference. There is a Intercom

>Ringers

>Ringer volume Ringer tone confirmation tone and the screen returns to the previous menu. RINGER VOLUME NOTES:

The handset ringer volume also determines the ringer volume for intercom calls. If the ringer volume is set to off, that handset is silenced for all incoming calls. If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID wont be announced. Ringer tone You can choose one of the ten ringer tones. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Ringer tone, then press MENU/ELECT. 4. Press qCID or pDIR to sample each ringer tone. 5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu. Ringer volume

>Ringer tone RINGER TONE

>Tone 1 NOTE: If you turn off the ringer volume, you will not hear ringer tone samples. 14 Telephone settings Handset settings et date/time The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and set the date and time manually (see Use caller ID to automatically set date and time on page 21). After a power failure or handset registration, the system prompts you to set the date and time. To set the date and time manually:

1. 2. 3. 4. 5. 6. 7. 8. Ringers

>Set date/time When the handset is in idle mode, press MENU/ELECT to enter the main menu. Press qCID or pDIR to scroll to et date/time and then press MENU/ELECT. Press qCID or pDIR to select the month, then press MENU/ELECT, or enter the number using the dialing keys. Press qCID or pDIR to select the day, then press MENU/ELECT, or enter the number using the dialing keys. Press qCID or pDIR to select the year, or enter the number using the dialing keys, then press MENU/ELECT to move on to set the time. Press qCID or pDIR to select the hour, then press MENU/ELECT, or enter the number using the dialing keys. Press qCID or pDIR to select the minute, then press MENU/ELECT, or enter the number using the dialing keys. Press qCID or pDIR to highlight AM or M, or press 2 for AM or 7 for M. Press MENU/ELECT to confirm. There is a confirmation tone and the screen returns to the previous menu. SET DATE MM/DD/YY SET TIME HH:MM --

NOTE: If the clock is not set when a message is recorded, the system announces, Time and day not set, before it plays the message. 15 Telephone settings Handset settings LCD language You can select the language used for all screen displays. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press MENU/ELECT to choose LCD language. 4. Press qCID or pDIR to highlight English, Franais or Espaol, then press MENU/ELECT. The screen prompts et English/Franais/Espaol as LCD language?

LCD LANGUAGE

>English Set Francais as LCD language?

5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu. NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU/ELECT on the handset in idle mode, then enter 364#. There is a confirmation tone. 16 Telephone settings Handset settings Caller ID announce The caller ID announce feature lets you know whos calling without having to look at the display. When you have an incoming call, the handset and/or base speaks Call from... and the name of the caller based on the directory or caller ID information. If the callers name is private or unknown, the phone number up to the last 11 digits will be announced. If the callers phone number is also private or unknown, no information will be announced. The default setting is On. To turn on or off the caller ID announce feature:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Caller ID annc, then press MENU/ELECT. LCD language

>Caller ID annc CALLER ID ANNC

>Local handset HS CID ANNOUNCE

>On 4. Press qCID or pDIR to highlight the desired option, then press MENU/ELECT. et all On/Off - Change the setting for the base and all handsets. Local handset - Change the setting for that handset only. Base - Change the setting for the telephone base only. 5. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT. There is a confirmation tone and the screen returns to the previous menu. If you change the setting to et all On/Off, the screen shows CID Annc ON/OFF on all H & B. NOTES:

To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the speakerphone. When the setting is On, the speakerphone speaks Call from... and the name of the caller based on the directory or caller ID information during an incoming call. If the callers name is unavailable, the phone number up to the last 11 digits will be announced. When there are up to five handsets registered, the telephone system supports caller ID announce for all handsets. If six or more handsets are registered, the system supports caller ID announce for the first four registered handsets only. This feature does not announce information for call waiting calls. It takes at least two rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone wont have time to announce the callers information. Pronunciation of names may vary with this feature. Not all names may be pronounced correctly. Caller ID announce is available in English only. 17 Telephone settings Handset settings et speed dial voicemail number This feature lets you save your voicemail number for easy access when you press and hold the To save your voicemail number:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press Caller ID annc

>Voicemail #

1 key. MENU/ELECT. 3. Press qCID or pDIR to scroll to Voicemail #, then press MENU/ELECT. 4. Use the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits) when prompted. Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset to erase a digit. Press and hold MUTE/DELETE on the handset to erase all digits. Press REDIAL/AUE to enter a three-second dialing pause (a p appears). VOICEMAIL #

800-222-3111_ Voicemail #

saved 5. Press MENU/ELECT to save. There is a confirmation tone and the screen displays Voicemail # saved then returns to the previous menu. Voicemail (visual message waiting) indicator If you subscribe to a voicemail service offered by your telephone service provider, this feature provides a visual indication when you have new voicemail messages. New voicemail and the icon appear on the handset screen. HANDSET 1 New voicemail 10:21PM 2/11 NOTES:

This feature does not indicate new messages recorded on your phones built-in answering system. For more information about the difference between your answering system and voicemail, see page 91. 18 Telephone settings Handset settings Clear voicemail indication Use this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while away from home. This feature only turns off the displayed New voicemail and the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators. To manually turn off the new voicemail indicators:

1. Press MENU/ELECT when in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Clr voicemail, then press MENU/ELECT. The screen shows Reset Voicemail Indicator?

4. Press MENU/ELECT again to turn the voicemail indication off. There is a confirmation tone and the screen returns to the previous menu.

>Clr voicemail Rename handset Reset Voicemail Indicator?

NOTES:

Your telephone service provider voicemail may alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details. For information about using your voicemail service, contact your telephone service provider. 19 Telephone settings Handset settings Rename handset You can edit the handset name for each system handset. 1. When the handset is idle, press MENU/ELECT. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. Clr voicemail

>Rename handset 3. Press qCID or pDIR to scroll to Rename handset, then press MENU/ELECT. 4. Change the handset name when prompted. RENAME HANDSET HANDSET____ Press qCID or pDIR to move the cursor to the left or right. Use the dialing keys to enter a name (up to 11 characters). Each time you press a key, a character on that key appears. Additional key presses produce other characters on that key. See the chart on page 60. Press MUTE/DELETE to backspace and delete a character. Press and hold MUTE/DELETE to delete all characters. 5. Press MENU/ELECT to save the setting and return to the previous menu. There is a confirmation tone. ey tone The handset is set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps when you press keys. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press Rename handset

>Key tone MENU/ELECT. 3. Press qCID or pDIR to scroll to ey tone, then press MENU/ELECT. 4. Press qCID or pDIR to select the desired volume or Off. 5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu. KEY TONE 20 Telephone settings Handset settings Use caller ID to automatically set date and time If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync feature on or off. The default setting is On. 1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to CID time sync, then press MENU/ELECT. 4. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT to save. There is a confirmation tone and the screen returns to the previous menu. Key tone

>CID time sync CID TIME SYNC

>On Home area code If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the seven digits of the telephone number. This feature makes it easy for you to place a call from the caller ID log. If you dial ten digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits. To set the home area code:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Home area code, then press MENU/ELECT. The screen briefly shows Only for 7digit dial from CID. 4. Use the dialing keys to enter a three-digit home area code. Press MUTE/DELETE to delete a digit. Press and hold MUTE/DELETE to delete all digits. CID time sync

>Home area code HOME AREA CODE ___ 5. Press MENU/ELECT to save. There is a confirmation tone and the screen shows Area code will not show in CID briefly before returning to the previous menu. 21 Telephone settings Handset settings NOTE: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the call ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/ELECT. The home area code is now restored to its default setting of _ _ _ (empty). Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To set the dial mode:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press Home area code

>Dial mode MENU/ELECT. 3. Press qCID or pDIR to scroll to Dial mode, then press MENU/ELECT. 4. Press qCID or pDIR to highlight Touch-tone or ulse, then press MENU/ELECT. There is a confirmation tone and the screen returns to the previous menu. DIAL MODE

>Touch-tone Web address Use this feature to view the AT&T website address. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Web address, then press MENU/ELECT. Settings

>Web address www.telephones. att.com 22 Telephone settings Handset settings QUIET mode When QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using the speakerphone or setting ringer volume, will sound as normal. After you turn on QUIET mode, this feature activates immediately and the answering system turns on automatically. When QUIET mode is on, the answering system takes calls and records messages without broadcasting them. To turn QUIET mode on:

1. Press and hold QUIET # in idle mode to enter the QUIET mode setting screen. The screen shows Quiet: _ _ hours (1-12 hours). 2. Use the dialing keys to enter the desired number of hours (1-12) you would like to turn on QUIET mode, then press MENU/ELECT. Your screen briefly shows Answering sys is ON and then Quiet mode on. To turn QUIET mode off:

While QUIET mode is on, press and hold QUIET #. The screen then shows Quiet mode is off and you hear a confirmation tone. NOTES:

If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode is on, the sample plays but the feature is still muted after saving the setting. After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again. The PTT function is not available when QUIET mode is on. When QUIET mode is on, the handset does not ring when there is an incoming intercom call, but the handset which initiates the intercom call does have the calling tone as normal. 23 Telephone settings Telephone base settings Use the menu to change the telephone settings. 1. Press MENU/ELECT on the telephone base when it is not in use to enter the main menu. 2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the

> symbol indicates the selected menu item. 3. Press MENU/ELECT to select the highlighted item.

>Play messages Answering sys p q NOTE: Press CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and hold CANCEL to return to idle mode. 24 Telephone settings Telephone base settings Ringer volume You can set the ringer volume level to one of six levels or turn the ringer off. When the ringer is off, appears on the screen. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press MENU/ELECT. 3. Press MENU/ELECT again to select Ringer volume. 4. Press qCID or pDIR to sample each volume level. 5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

>Ringer volume Ringer tone p q RINGER VOLUME p q NOTES:

The telephone base ringer volume also determines the ringer volume for intercom calls. If the ringer volume is set to off, the telephone base is silenced for all incoming calls. If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID wont be announced. Ringer tone You can choose one of the ten ringer tones. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Ringer tone, then press MENU/ELECT. Ringer volume

>Ringer tone p q RINGER TONE

>Tone 1 p q 4. Press qCID or pDIR to sample each ringer tone. 5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu. NOTE: If you turn off the ringer volume, you will not hear ringer tone samples. 25 Telephone settings Telephone base settings et date/time The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and set the date and time manually (see Use caller ID to automatically set date and time on page 32). After a power failure, the system prompts you to set the date and time. To set the date and time manually:

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to et date/time and then press MENU/ELECT. 3. Press qCID or pDIR to select the month, then press MENU/ELECT, or enter the number using the dialing keys. 4. Press qCID or pDIR to select the day, then press MENU/ELECT, or enter the number using the dialing keys. 5. Press qCID or pDIR to select the year, or enter the number using the dialing keys, then press MENU/ELECT to move on to set the time. Ringers

>Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM --

p q 6. Press qCID or pDIR to select the hour, then press MENU/ELECT, or enter the number using the dialing keys. 7. Press qCID or pDIR to select the minute, then press MENU/ELECT, or enter the number using the dialing keys. 8. Press qCID or pDIR to highlight AM or M, or press 2 for AM or 7 for M. Press MENU/ELECT to confirm. There is a confirmation tone and the screen returns to the previous menu. NOTE: If the clock is not set when a message is recorded, the system announces, Time and day not set, before it plays the message. 26 Telephone settings Telephone base settings LCD language You can select the language used for all screen displays. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press MENU/ELECT to choose LCD language. 4. Press qCID or pDIR to highlight English, Franais or Espaol, then press MENU/ELECT. The screen prompts et English/Franais/Espaol as LCD language?

LCD LANGUAGE

>English p q Set Francais as LCD language?

p q 5. Press MENU/ELECT to confirm and save your preference. There is a confirmation tone and the screen returns to the previous menu. NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU/ELECT on the base in idle mode, then enter 364#. There is a confirmation tone. 27 Telephone settings Telephone base settings Caller ID announce The caller ID announce feature lets you know whos calling without having to look at the display. When you have an incoming call, the handset and/or base speaks Call from... and the name of the caller based on the directory or caller ID information. If the callers name is private or unknown, the phone number up to the last 11 digits will be announced. If the callers phone number is also private or unknown, no information will be announced. The default setting is On. To turn on or off the caller ID announce feature:

1. Press MENU/ELECT in idle mode to enter the LCD language

>Caller ID annc main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Caller ID annc, then press MENU/ELECT. 4. Press qCID or pDIR to highlight the desired option, p q BS CID ANNOUNCE

>On p q then press MENU/ELECT. et all On/Off - Change the setting for the base and all handsets. Base - Change the setting for the telephone base only. 5. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT. There is a confirmation tone and the screen returns to the previous menu. If you change the setting to et all On/Off, the screen shows CID Annc ON/OFF on all H & B. NOTES:

To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the speakerphone. When the setting is On, the speakerphone speaks Call from... and the name of the caller based on the directory or caller ID information during an incoming call. If the callers name is private or unknown, the phone number up to the last 11 digits will be announced. This feature does not announce information for call waiting calls. It takes at least two rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone wont have time to announce the callers information. Pronunciation of names may vary with this feature. Not all names may be pronounced correctly. Caller ID announce is available in English only. 28 Telephone settings Telephone base settings et speed dial voicemail number This feature lets you save your voicemail number for easy access when you press and hold the To save your voicemail number:

1. Press MENU/ELECT in idle mode to enter the 1 key. main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Voicemail #, then press MENU/ELECT. 4. Use the dialing keys to enter the voicemail access Caller ID annc

>Voicemail #

p q VOICEMAIL #

800-233-3111_ number provided by your telephone service provider

(up to 30 digits) when prompted. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE on the telephone base to erase a digit. Press and hold X/DELETE on the telephone base to erase all digits. Press REDIAL/AUE to enter a three-second dialing pause

(a p appears). saved Voicemail #

5. Press MENU/ELECT to save. There is a confirmation tone and the screen displays Voicemail # saved then returns to the previous menu. Voicemail (visual message waiting) indicator If you subscribe to a voicemail service offered by your telephone service provider, this feature provides a visual indication when you have new voicemail messages. New voicemail and the base screen. icon appear on the telephone 2/11 BASE New voicemail AM 10:21 MSG #

0 NOTES:

This feature does not indicate new messages recorded on your phones built-in answering system. For more information about the difference between your answering system and voicemail, see page 90. 29 Telephone settings Telephone base settings Clear voicemail indication Use this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while away from home. This feature only turns off the displayed New voicemail and the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators.

>Clr voicemail Rename base p q Reset Voicemail Indicator?

To manually turn off the new voicemail indicators:

4. Press MENU/ELECT again to turn the voicemail indication off. There is a confirmation tone and the screen returns to the previous menu. NOTES:

Your telephone service provider voicemail may alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details. For information about using your voicemail service, contact your telephone service provider. 30 Telephone settings Telephone base settings Rename base You can edit the name for the telephone base. 1. When the telephone is idle, press MENU/ELECT. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Rename base, then press MENU/ELECT. 4. Change the telephone base name when prompted. Clr voicemail

>Rename base p q RENAME BASE BASE_______ Press qCID or pDIR to move the cursor to the left or right. Use the dialing keys to enter a name (up to 11 characters). Each time you press a key, a character on that key appears. Additional key presses produce other characters on that key. See the chart on page 60. Press X/DELETE to backspace and delete a character. Press and hold X/DELETE to delete all characters. 5. Press MENU/ELECT to save the setting and return to the previous menu. There is a confirmation tone. ey tone The telephone base is set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps when you press keys. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to ey tone, then press MENU/ELECT. 4. Press qCID or pDIR to select the desired volume or Off. Rename base

>Key tone p q KEY TONE p q 5. Press MENU/ELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu. 31 Telephone settings Telephone base settings Use caller ID to automatically set date and time If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync feature on or off. The default setting is On. 1. When the telephone is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to CID time sync, then press MENU/ELECT. 4. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT to save. There is a confirmation tone and the screen returns to the previous menu. Key tone

>CID time sync p q CID TIME SYNC

>On p q Home area code If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the seven digits of the telephone number. This feature makes it easy for you to place a call from the caller ID log. If you dial ten digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits. To set the home area code:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. CID time sync

>Home area code 3. Press qCID or pDIR to scroll to Home area code, then press MENU/ELECT. The screen briefly shows Only for 7digit dial from CID. 4. Use the dialing keys to enter a three-digit home area code. Press X/DELETE to delete a digit. Press and hold X/DELETE to delete all digits. p q HOME AREA CODE ___ 5. Press MENU/ELECT to save. There is a confirmation tone and the screen shows Area code will not show in CID briefly before returning to the previous menu. 32 Telephone settings Telephone base settings NOTE: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With the home area code displayed, press and hold X/DELETE until the digits are deleted, and then press MENU/ELECT. The home area code is now restored to its default setting of _ _ _ (empty). Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To set the dial mode:

1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to ettings, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Dial mode, then press MENU/ELECT. 4. Press qCID or pDIR to highlight Touch-tone or ulse, then press MENU/ELECT. There is a confirmation tone and the screen returns to the previous menu. Home area code

>Dial mode p q DIAL MODE

>Touch-tone p q Web address Use this feature to view the AT&T website address. 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Web address, then press MENU/ELECT. Settings

>Web address p q www.telephones. att.com 33 Telephone operation Telephone operation Making a call Using a cordless handset:

Press HONE/FLAH or /EAER telephone number. EAER, then enter the The screen displays the elapsed time as you talk (in hours, minutes and seconds). Press /EAER Using the telephone base:

The screen displays the elapsed time as you talk (in hours, minutes and seconds). EAER, then enter the telephone number. Elapsed time Phone 0:00:30 6:30AM 8/06 Elapsed time Speaker 0:00:30 8/06 6:30AM NOTE: Pressing HONE/FLAH or services from your telephone service provider does not affect the elapsed time.

/EAER EAER to access On hook dialing (predialing) Using a cordless handset:

1. Enter the telephone number. Press MUTE/DELETE to make corrections when entering the phone number. 2. Press HONE/FLAH or /EAER Using the telephone base:

1. Enter the telephone number. Press X/DELETE to make corrections when EAER to dial. entering the phone number. EAER to dial. 2. Press /EAER Answering a call Using a cordless handset:

-OR-

Press HONE/FLAH or /EAER EAER. Press any dialing key (0-9, TONE or #). Press /EAER EAER. Using the telephone base:

-OR-

Press any dialing key (0-9, TONE or #). 34 Telephone operation Telephone operation operation Ending a call Using a cordless handset:

Press OFF/CANCEL or return the handset to the telephone base or charger. Using the telephone base:

Press /EAER EAER. Auto off A call ends automatically when you put the handset in the telephone base or charger. Temporary ringer silencing Using a cordless handset:

Press OFF/CANCEL or MUTE/DELETE while the telephone is ringing to silence the ringer temporarily on that handset only. This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume. Using the telephone base:

Press CANCEL or MUTE while the telephone is ringing to silence the ringer temporarily on the telephone base only. This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume. Ringer muted Ringer muted NOTE: The telephone base and all handsets ring when there is an incoming call unless the ringer volume is turned off on that device. 35 Telephone operation Telephone operation Handset speakerphone During a call, press /EAER and normal handset use. Press OFF/CANCEL to hang up. The speakerphone on the telephone activates as long as you make or answer calls by pressing the /EAER EAER to switch between handsfree speakerphone EAER. Press /EAER EAER to hang up. NOTES:

When you use the speakerphone on the handset, the key pad and the the handset are lit. When you use the speakerphone on the telephone base, the button on the telephone base is lit. The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. After installing a battery into the handset, the screen may show Low battery. If you use the speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation and charging section on pages 9-10.

/EAER button on

/EAER Last number redial Each handset and the telephone base stores the last ten telephone numbers dialed (up to 30 digits each). To view the ten most recently dialed numbers:

Using a cordless handset:

To display the most recently called number, press REDIAL/AUE. To view up to ten recently called numbers, press REDIAL/AUE, then qCID, pDIR or REDIAL/AUE repeatedly. The handset beeps twice at the end of the list. Press OFF/CANCEL to exit. 36 Redial #1/10 888-883-2445 Telephone operation Telephone operation Using the telephone base:

To display the most recently called number, press REDIAL/AUE. To view up to ten recently called numbers, press REDIAL/AUE, then qCID, pDIR or REDIAL/AUE repeatedly. Redial #1/10 888-883-2445 p q The telephone base beeps twice at the end of the list. Press CANCEL to exit. To redial a number:

Using a cordless handset:

To dial the displayed number, press HONE/FLAH or /EAER EAER.

-OR-

Press HONE/FLAH or /EAER repeatedly to view the redial memory. Press MENU/ELECT to dial the displayed number. EAER, then press REDIAL/AUE Using the telephone base:

To dial the displayed number, press /EAER EAER.

-OR-

Press /EAER redial memory. Press MENU/ELECT to dial the displayed number. EAER, then press REDIAL/AUE repeatedly to view the To delete a redial entry:

Using a cordless handset:

While the screen displays the desired number, press MUTE/DELETE to delete the number from the redial memory. Using the telephone base:

While the screen displays the desired number, press X/DELETE to delete the number from the redial memory. 37 Telephone operation Telephone operation Equalizer The handset equalizer enables you to change the quality of the audio to best suit your hearing. While on a call or intercom call, or listening to a message or announcement, press EQ to select the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting). The current setting is shown on the handset screen for two seconds. NOTES:

If you switch the call between the handset and the speakerphone by pressing The current equalizer setting remains unchanged until a new setting is selected.

/EAER, the audio setting remains unchanged. Treble 1 6:30AM 8/06 Treble 2 6:30AM 8/06 Bass 6:30AM 8/06 Natural 6:30AM 8/06 38 Telephone operation Options while on calls Volume control Using a cordless handset:

You can set the listening volume to one of six levels. While on a call, press qCID/VOLUME to decrease or press pDIR/VOLUME to increase the listening volume. Using the telephone base:

You can set the listening volume to one of eight levels. While on a call, press q/VOLUME to decrease or VOLUME/p to increase the listening volume. NOTES:

Handset and speakerphone volume settings are independent. When the volume reaches the minimum or maximum setting, you hear two beeps. Call waiting If you subscribe to call waiting service from your telephone service provider, you hear two beeps if someone calls while you are already on a call. Press HONE/FLAH on the handset or FLAH on the telephone base to put your current call on hold and take the new call. Press HONE/FLAH on your handset or FLAH on your telephone base at any time to switch back and forth between calls. NOTE: Missed call waiting calls are not counted as missed calls. 39 Telephone operation Options while on calls Mute Use the mute function to turn off the microphone. You can hear the caller, but the caller cannot hear you. Using a cordless handset:

To mute a call:

While on a call, press MUTE/DELETE. When mute is on, the handset shows Muted for a few seconds and MUTE icon displays until you turn off mute. To end mute a call:

Press MUTE/DELETE again. When mute is off, Microphone ON appears temporarily on the handset. Using the telephone base:

To mute a call:

While on a call, press MUTE. When mute is on, the telephone base shows Muted for a few seconds. To end mute a call:

Press MUTE again. When mute is off, Microphone ON appears temporarily on the telephone base. Muted 6:30AM MUTE 8/06 Microphone ON 6:30AM 8/06 Muted 8/06 6:30AM Microphone ON 8/06 6:30AM 40 Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from the numbers in the directory, caller ID log or redial memory while you are on a call. Chain dialing is useful when you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. Using a cordless handset:

To access the directory while on a call:

1. Press MENU/ELECT. 2. Press qCID or pDIR to scroll to Directory and then press MENU/ELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/ELECT to dial the number shown. To access the caller ID log while on a call:

1. Press MENU/ELECT. 2. Press qCID or pDIR to scroll to Caller ID log, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/ELECT to dial the number shown. To access the redial list while on a call:

1. Press REDIAL/AUE to show the most recently dialed number. 2. Press qCID or pDIR to scroll to the desired number, or press REDIAL/AUE repeatedly to find the desired number. Press

. Press MENU/ELECT to dial the number shown. Intercom

>Directory Charlie Johnson 888-883-2445 Phone 0:01:20 Charlie Johnson 6:30AM 8/06 REDIAL #1/10 800-360-4121 41 Telephone operation Options while on calls Using the telephone base:

To access the directory while on a call:

1. Press MENU/ELECT. Press pDIR, then skip to Step 3. 2. Press qCID or pDIR to scroll to Directory and then

-OR-

press MENU/ELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/ELECT to dial the number shown. Intercom

>Directory Charlie Johnson 888-883-2445 p q Speaker 0:01:20 Charlie Johnson

-OR-

To access the caller ID log while on a call:

1. Press MENU/ELECT. Press qCID, then skip to Step 3. 2. Press qCID or pDIR to scroll to Caller ID log, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/ELECT to dial the number shown. 6:30AM 8/06 To access the redial list while on a call:

1. Press REDIAL/AUE to show the most recently dialed number. 2. Press qCID or pDIR to scroll to the desired number, or press REDIAL/AUE repeatedly to find the desired number. Press Press MENU/ELECT to dial the number shown. REDIAL #1/10 800-360-4121 p q NOTES:

You cannot edit a directory entry while on a call. For more details about the directory, see pages 58-67. You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID log, see pages 68-74. If you press REDIAL/AUE while on a call, you can only view the ten most recently dialed numbers but you cannot erase the entries. For more details about the redial memory, see pages 36-37. Press OFFOFF/CANCEL on the handset or CANCEL on the telephone base to exit redial, directory or caller ID log when on a call. 42 Telephone operation Options while on calls Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. 1. During a call, press TONE . 2. Use the dialing keys to enter the desired number. The telephone sends touch-tone signals. 3. The telephone automatically returns to pulse dialing after you end the call. Blind transfer While on an outside call, you can transfer the call to a specific device or any device without notifying them. To transfer an outside call from a handset:

1. During the call, press MENU/ELECT. 2. Press MENU/ELECT to choose Transfer. Phone 0:00:12 If you have one handset and no other registered devices, the outside call is put on hold and your handset shows Transferring call... The telephone base rings and shows Transfer from HANDET X. If you have other registered device(s) or more than one handset, your screen shows TRANFER TO: Use the dialing keys to eenter a specific device number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE followed by #

for all devices), or press qCID or pDIR to scroll to the desired device and press MENU/ELECT. The outside call is put on hold and your handset screen shows Transferring call... or Transferring call to all... The other device rings and shows Transfer from HANDET X

(HANDET represents the handset name, X represents the handset number). 6:30AM 8/06

>Transfer Intercom TRANSFER TO:

>Handset 2 3. To answer the call on the destination handset, press

, press HONE/FLAH or

/EAER EAER. To answer the call on the telephone base, press

/EAER EAER. The initiating handset shows Call transferred and goes to

, press idle mode. 43 Telephone operation Options while on calls To transfer an outside call from the telephone base:

1. During the call, press MENU/ELECT. 2. Press MENU/ELECT to choose Transfer. Speaker 0:00:12 8/06 6:30AM

>Transfer Intercom p q If your have one handset and no other registered devices, the outside call is put on hold and the telephone base shows Transferring call... The handset rings and shows Transfer from BAE 0

(BAE represents the base name). If you have other registered device(s) or more than one handset, the telephone base shows TRANFER TO: Use the dialing keys to eenter a specific handset number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE followed by #

for all devices), or press qCID or pDIR to scroll to the desired device and press MENU/ELECT. The outside call is put on hold and the telephone base shows Transferring call... or Transferring call to all... The other handset(s) rings and shows Transfer from BAE 0

(BAE represents the base name).

> Handset 2 TRANSFER TO:

p q 3. To answer the call on the destination handset, press

, press HONE/FLAH or

/EAER EAER. The telephone base shows Call transferred and goes to idle mode. NOTES:

To cancel the transfer and return to the external call before the blind transfer call is answered, press OFF/OFF/CANCEL, HONE/FLAH or

/EAER EAER on your handset, or CANCEL or

/EAER EAER on your telephone base. If the other device does not answer the transfer within 30 seconds, the transfer ends and the initiating device rings while showing No response to transfer. If it does not pick up within 30 seconds, the device returns to idle mode and the outside call ends. 44 Multiple handset use Multiple handset use Handset locator The handset locator feature is useful if you misplace any handsets. To start the paging tone:

Press /HANDET LOCATOR on the telephone base to start the paging tone on all handsets for 60 seconds. NOTE: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues. To stop the paging tone:

Press HONE/FLAH, /EAER

(0-9, TONE or #) on the handset(s). EAER, or any dialing key

**Paging**

-OR-

Press /HANDET LOCATOR, MUTE or CANCEL on the telephone base. Join a call in progress When a handset or the telephone base is already on a call and you would like to join the call, press HONE/FLAH or /EAER EAER on your handset or

/EAER EAER on your telephone base. To end the call using a handset, press OFF/CANCEL or place the handset in the telephone base or charger. To end the call using the telephone base, press /EAER telephone base hang up. EAER. The call does not end until all handsets and the NOTE: You can use up to four system handsets and the telephone base at the same time on an outside call. 45 Multiple handset use Intercom Use the intercom feature for conversations between two handsets, a handset and the telephone base, or a handset/telephone base and a cordless headset/speakerphone (sold separately). You can buy additional expansion handsets (model AT&T CL80114), cordless headsets and speakerphones for this telephone base to expand your telephone system (up to 12 handsets or 10 cordless handsets and two cordless headsets/speakerphones). Using a cordless handset:

1. Press MENU/ELECT in idle mode to enter the main menu. Press qCID or pDIR to scroll to Intercom, then press MENU/ELECT. If you have one handset and no other registered devices, the handset shows Calling base. If you have cordless headset(s)/speakerphone(s) or more than one handset, the handset shows INTERCOM TO:

Use the dialing keys to eenter a specific device number

(0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, # for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by #

for all devices), or press qCID or pDIR to scroll to the desired device and press MENU/ELECT. Your handset screen shows Calling HANDET X, Calling BAE 0, Calling headset or Calling all devices. Calling Base 0 HANDSET X is calling Intercom 11:35AM 12/02 The destination device(s) rings and shows HANDET X is calling or HANDET X is calling all (HANDET represents the handset name, X represents the handset number). 2. To answer the intercom call, press HONE/FLAH, /EAER EAER or any dialing key (0-9, TONE , or #) on the called device. Both devices now show Intercom. 3. To end the intercom call, one party presses OFF/CANCEL, or place the handset back in the telephone base or charger; or presses CANCEL on the telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display Intercom ended. 46 Calling HANDSET X Multiple handset use Intercom Using the telephone base:

1. Press MENU/ELECT in idle mode to enter the main menu. Press qCID or pDIR to scroll to Intercom, then press MENU/ELECT. Base 0 is calling If you have one handset and no other registered devices, the telephone base shows Calling HANDET X. If you have cordless headset(s)/speakerphone(s) or more than one handset, the telephone base shows INTERCOM TO: Use the dialing keys to eenter a specific handset number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, # for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all devices), or press qCID or pDIR to scroll to the desired device and press MENU/ELECT. The telephone base shows Calling HANDET X or Calling all handsets. Intercom The destination device(s) rings and shows BAE 0 is calling or BAE 0 is calling all. 2. To answer the intercom call, press HONE/FLAH, /EAER EAER or any dialing key (0-9, TONE , or #) on the destination handset. Both the base and the handset now show Intercom. 3. To end the intercom call, one party presses OFF/CANCEL, or places the handset back in the telephone base or charger; or presses CANCEL on the telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display Intercom ended. NOTES:

Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the handset or CANCEL on the telephone base.. If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on a call, or is out of range, the initiating device shows No answer. Try again. To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the handset, or press CANCEL or MUTE on the telephone base. You can only use one pair of devices at a time to make intercom calls. For cordless headsets and speakerphones, refer to the corresponding users manual on how to answer and end an intercom call. If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base, they appear as HEADET 1 and HEADET 2 respectively in the intercom menu. 47 Multiple handset use Intercom Answer an incoming call during an intercom call If you receive an outside call during an intercom call, there is a two-beep call waiting tone. To answer the call, press HONE/FLAH on the handset or /EAER EAER on the telephone base. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system devices can also answer the incoming call by pressing HONE/FLAH or /EAER handset or /EAER To end the intercom call without answering the incoming call, press OFF/CANCEL on the handset or CANCEL on the telephone base. EAER on the telephone base. EAER on the NOTE: For cordless headsets and speakerphones, refer to the corresponding users manual on how to answer an incoming call during an intercom call. 48 Multiple handset use Call transfer using intercom Use the intercom feature to transfer an outside call to another system handset or the telephone base. You can also share an outside call with another system handset or the telephone base. To transfer or share an outside call using intercom:

Using a cordless handset:

1. During the call, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Intercom and press MENU/ELECT. 3. Choose the device(s) you would like to transfer the call to using the options from Step 1 on page 46. 4. When the destination device picks up, your handset shows Intercom and the outside call is put on hold. You have the following options:

You can transfer the call. Press MENU/ELECT twice to choose Transfer. The handset shows Call transferred. The other device automatically connects to the outside call. You can let the other device join you on the outside call in a three-way conversation. Press MENU/ELECT. Press qCID or pDIR to highlight hare call, then press MENU/ELECT. You can end the intercom call and continue the outside call with your handset. Press HONE/FLAH on your handset (the ended intercom call party hears four beeps).

>Transfer Share call Using the telephone base:

1. During the call, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Intercom and press MENU/ELECT. 3. Choose the handset(s) you would like to transfer the call to using the options from Step 1 on page 47. 4. When the destination handset(s) picks up, the telephone base shows Intercom and the outside call is put on hold. You have the following options:

You can transfer the call. Press MENU/ELECT twice to choose Transfer. The telephone base shows Call transferred. The other handset automatically connects to the outside call. You can let the other handset join you on the outside call in a three-way conversation. Press MENU/ELECT. Press qCID or pDIR to highlight hare call, then press MENU/ELECT. You can end the intercom call and continue the outside call with the telephone base. Press CANCEL on the telephone base (the ended intercom call party hears four beeps).

>Transfer Share call p q 49 TT Multiple handset use Push-to-talk (PTT) You can directly broadcast messages to the speakerphone of any device. Press and hold UH TO TAL on a handset or TT on the telephone base to begin two-way communication. Only one device can talk at a time. While talking to another device, press and hold UH TO TAL on the handset or TT on the telephone base. You must release UH TO TAL on the handset or TT on the telephone base, so the other person can respond. Only one PTT session can be active at a time. While PTT is in use between two devices, other devices cannot use the intercom feature but can access the answering system. When you attempt to place a PTT call to another device which is accessing the answering system or on an intercom call or outside call, your device screen shows Not available at this time. NOTE: The PTT function is not available when QUIET mode is on. Turn TT on or off Using a cordless handset:

1. Press UH TO TAL when the handset is not in use. The UH TO TAL menu displays. 2. Press qCID or pDIR to highlight TT On/Off, then press MENU/ELECT. PUSH TO TALK

>PTT On/Off 3. Press qCID or pDIR to choose On or Off, then press MENU/ELECT. Using the telephone base:

1. Press TT when the telephone base is not in use. The UH TO TAL menu displays. 2. Press qCID or pDIR to highlight TT On/Off, then press MENU/ELECT. PUSH TO TALK

>PTT On/Off p q 3. Press qCID or pDIR to choose On or Off, then press MENU/ELECT. NOTE: The handset or the telephone base screen displays No Incoming TT when PTT is turned off. 50 Multiple handset use Push-to-talk (PTT) TT call to a single device Using a cordless handset:

1. There are a few ways to begin a PTT call to a single device. When the handset is not in use:

If you have one handset, press and hold UH TO TAL. If you have more than one handset:

w Press UH TO TAL on the handset, then use the dialing keys to enter the destination device number.

-OR-

w Press UH TO TAL on the handset. Press qCID or pDIR to highlight the destination device number, then press MENU/ELECT or UH TO TAL. The handset shows Connecting to HANDET X...

(HANDET represents the handset name, X represents the destination handset number) or Connecting to BAE 0...

(BAE represents the base name) for a few seconds. When the connection is made, both your and the destination device screens display ress and hold [TT] to talk. PUSH TO TALK

>HANDSET X Connecting to HANDSET X... Press and hold

[PTT] to talk 2. Press and hold UH TO TAL. A chirp indicates your microphone is on. Speak towards the device. Your voice is broadcast to the destination device. While you are speaking, your handset shows TT To handset: X or TT To base. PTT To handset: X 3. Release UH TO TAL after speaking. Both devices beep once again and the screens show ress and hold [TT] to talk, then you can press and hold UH TO TAL to continue speaking or the destination device can respond (see Answer a TT call on page 55). 4. To end the PTT call, press OFF/CANCEL or place the handset in the telephone base or charger. The handset shows ush to talk Ended. 51 Multiple handset use Push-to-talk (PTT) Using the telephone base:

1. There are a few ways to begin a PTT call to a single handset. When the telephone base is not in use:

If you have one handset, press and hold TT. If you have more than one handset:

w Press TT, then use the dialing keys to enter the destination handset number.

-OR-

w Press qCID or pDIR to highlight the destination handset number, then press MENU/ELECT or TT. PUSH TO TALK

>HANDSET X p q Connecting to HANDSET X... Press and hold

[PTT] to talk The telephone base shows Connecting to HANDET X...

(HANDET represents the handset name, X represents the destination handset number) for a few seconds. When the connection is made, both the telephone base and destination handset display ress and hold [TT] to talk. 2. Press and hold TT. A chirp indicates your microphone is on. Speak towards the telephone base. Your voice is broadcast to the destination handset. While you are speaking, the telephone base shows TT To handset: X. PTT To handset: X 3. Release TT after speaking. Both devices beep once again and the screens show ress and hold [TT] to talk, then you can press and hold TT to continue speaking or the destination device can respond (see Answer a TT call on page 55). 4. To end the PTT call, press CANCEL. The telephone base shows ush to talk Ended for a few seconds. 52 Multiple handset use Push-to-talk (PTT) TT call to multiple devices When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of one-to-five calls when one to five handsets are registered, and a maximum of one-to-four calls when six or more handsets are registered. The first four registered handsets will be able to use this feature. Other handsets can only use PTT for one-to-one calls. To call multiple devices:

Using a cordless handset:

1. You have three ways to call multiple devices. When the handset is not in use:

Press and hold UH TO TAL until the handset shows Connecting to group... Press UH TO TAL. Press qCID or pDIR to choose Group. Press MENU/ELECT or press UH TO TAL and your handset shows Connecting to group... Press UH TO TAL. Press TONE followed by # (pound key). The handset shows Connecting to group... When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold UH TO TAL when you want to speak. Speak towards the handset. Your voice is broadcast to all devices. 3. Release UH TO TAL after speaking. 4. Any extension can reply (see Answer a TT call on page 55). 53 Multiple handset use Push-to-talk (PTT) Using the telephone base:

1. You have three ways to call multiple handsets. When the telephone base is not in use:

Press and hold TT until the screen shows Connecting to group... Press TT. Press qCID or pDIR to choose Group. Press MENU/ELECT or press TT and the telephone base shows Connecting to group... Press TT. Press TONE followed by # (pound key). The screen shows Connecting to group... When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold TT when you want to speak. Speak towards the telephone base. Your voice is broadcast to all devices. 3. Release TT after speaking. 4. Any extension can reply (see Answer a TT call on page 55). NOTE: After UH TO TAL on the handset or TT on the telephone base is released, the PTT call remains open for a short time. If no one presses UH TO TAL on the handset or TT on the telephone base within ten seconds, the PTT call ends automatically. 54 Multiple handset use Push-to-talk (PTT) Answer a TT call You can respond to a PTT call as described below. 1. 2. When your device receives a PTT call, it beeps and shows ress and hold

[TT] to talk. When the other party is speaking, your speakerphone light is on, and your device shows:

TT From H X To H X (the first X represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear).

-OR-

TT From H X To Base & H X (the first X represents the initiating handset number, and the second X represents your handset number;

a maximum of four handset numbers appear).

-OR-

TT From Base To H X (the X represents your handset number; a maximum of five handset numbers appear). 3. When your speakerphone light is off (the screen shows ress and hold

[TT] to talk), press and hold UH TO TAL on your handset or TT on your telephone base. You will hear a chirp. Speak towards the device. While you are speaking, your device shows TT To Handset: X

(X represents the handset numbers of one or more destination handsets;

a maximum of five handset numbers appear) or TT To Base & Handset: X (X represents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear). Your voice is broadcast to all destination devices. After speaking, release UH TO TAL on your handset or TT on your telephone base. Your device will beep. After the beep, if your speakerphone light is off, you can press and hold UH TO TAL on your handset or TT on your telephone base to continue speaking, or the destination device can respond. 55 Multiple handset use Push-to-talk (PTT) Change a one-to-one TT call to an intercom call You can convert a one-to-one PTT session to an intercom call. 1. 2. 3. 4. When your device shows ress and hold [TT] to talk, press MENU/ELECT. The screen shows Intercom. Press MENU/ELECT. Your device displays Calling BAE 0 or Calling HANDET X. The destination device briefly shows ush to talk Ended and then HANDET X is calling or BAE 0 is calling. The destination device rings. Press HONE/FLAH or any dialing keys (0-9, # or TONE ) on the destination handset, or press /EAER or any dialing keys (0-9, # or TONE ) on the telephone base to answer the intercom call. Both devices now show Intercom. To end the intercom call, press OFF/CANCEL on your handset or place the handset in the telephone base or charger, or press CANCEL on the telephone base. Both screens show Intercom ended. Answer an incoming call during a TT call When you receive an outside call during PTT, there is an alert tone. During a one-to-one PTT, press HONE/FLAH on the initiating or destination handset. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press HONE/FLAH on the initiating handset or /EAER on the initiating telephone base. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press HONE/FLAH on any one of the destination handsets, or press /EAER on the destination telephone base. That device answers the outside call. The PTT call continues for the rest of the PTT participants. To leave the PTT call without answering the incoming call, press OFF/CANCEL on your handset or CANCEL on your telephone base. The telephone continues to ring. 56 Multiple handset use Push-to-talk (PTT) Make an outgoing call during TT call During a one-to-one PTT call, press HONE/FLAH on your handset or

/EAER on your telephone base to get a dial tone. The PTT call ends automatically. During a one-to-group PTT call, press HONE/FLAH on the initiating handset or /EAER on the initiating telephone base. The PTT call ends automatically and you get a dial tone. During a one-to-group PTT call, press HONE/FLAH on any one of the destination handsets or press /EAER on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants. End or leave a TT call For one-to-one PTT calls, both initiating and destination devices can end the PTT call. For PTT calls to multiple devices, the initiating device can end the PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up. Press OFF/CANCEL on the handset, or press CANCEL on the telephone base. The screen shows ush to talk Ended.

-OR-

Place the handset in the telephone base or charger, then the handset return to idle mode. NOTE: After UH TO TAL on the handset or TT on the telephone base is released, the PTT call remains open for a short time. If no one presses UH TO TAL on the handset or TT on the telephone base within ten seconds, the PTT call ends automatically. 57 Directory About the directory hared directory The directory is shared by all handsets and the telephone base. Changes made to the directory from any device apply to all. Charlie Johnson 888-883-2445 NOTE: Only one handset or the telephone base can review the directory at a time. If another device tries to enter the directory, the screen shows Not available at this time. Capacity The directory can store up to 50 entries, with a maximum of 15 alphanumeric characters (including spaces) for names and 30 digits for telephone numbers. A convenient search feature can help you find and dial numbers quickly (page 62). If you try to save an entry when there are already 50 entries, the screen shows Directory full. You cannot store a new number until you delete one. 58 Directory Create directory entries Create a new directory entry 1. Press MENU/ELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Directory, then press MENU/ELECT. 3. Press qCID or pDIR to highlight Add contact. 4. Press MENU/ELECT. 5. Use the dialing keys to enter a telephone number (up to 30 digits) when prompted. Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a digit. Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all digits. Press and hold REDIAL/AUE to enter a three-second dialing pause (a p appears). Answering sys

>Directory Review

>Add contact ENTER NUMBER 888-883-2445_

-OR-

Copy a number from the redial list by pressing REDIAL/AUE then qCID, pDIR or pressing REDIAL/AUE repeatedly to locate the number. Press MENU/ELECT to copy the number. 6. Press MENU/ELECT to move on to the name. The display shows Number already saved if the number is already in the directory. You cannot save the same number twice. 7. Use the dialing keys to enter a name (up to 15 characters) ENTER NAME Robert Brown_ Saved when prompted. Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. See the chart on next page. Press qCID or pDIR to move the cursor to the left or right. Press 0 to add a space. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character. Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all characters. Press TONE to change the next letter to upper or lower case. 59 Directory Create directory entries NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as lower case letters as shown in the chart below. 10

, Characters by number of key presses 3

C F I L O R V Y 4 a d g j m S t Z 5

(

b e h k n p u w 6

) c f i l o q v x 7

2 3 4 5 6 r 8 y 8

s z 9

7 9 1 1 A D G J M P T W space 2

. B E H K N Q U X 0 Dialing keys 1 2 3 4 5 6 7 8 9 0

8. Press MENU/ELECT to store your new directory entry. There is a confirmation tone and the screen shows aved. To change the entry later, see page 64. Add a predialed telephone number to the directory You can save a predialed telephone number to the directory. 1. Enter the telephone number when in idle mode. 2. Follow the steps in Edit a directory entry on page 64. 800-222-3111 6:30AM 8/06 60 Directory Review the directory Review directory entries 1. Press pDIR when in idle mode. The summary screen shows briefly and then the first entry in the directory shows.

-OR-

Press MENU/ELECT when in idle mode, then press qCID or pDIR to scroll to Directory. Press MENU/ELECT twice. 2. Press qCID or pDIR to browse through the directory. Entries appear alphabetically by the first letter in the name. NOTES:

If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone number. Press TONE to move towards the end of the telephone number or press # (pound key) to move towards the beginning of the telephone number. If there are no directory entries, Directory emtpy appears briefly on the screen, followed by Add contact? If you would like to add a new contact, press MENU/ELECT and refer to pages 59-60 for instructions on creating a new directory entry. Otherwise, press OFFOFF/CANCEL on the handset or CANCEL on the telephone base to cancel. 61 Directory Search the directory earch by name 1. Press pDIR in idle mode to show the first listing in the directory. 2. When an entry appears, press the dialing keys (0-9) to start a name search. The directory shows the first name beginning with the first letter associated with the dialing key if there is an entry in the directory beginning with that letter. Press qCID or pDIR to scroll through the directory. 3. To see other names starting with the letters on the same dialing key, keep pressing the key. The names appear in alphabetical order. For example, if you have the names Jennifer, Jessie, evin and Linda in your directory:

If you press 5 (JL) once, you see Jennifer. Press qCID and you see Jessie. If you press 5 (JL) twice, you see evin. If you press 5 (JL) three times, you see Linda. If you press 5 (JL) four times, you see 5 and then the directory entry beginning with 5 or the next closest entry after 5. If you press 5 (JL) five times, you see Jennifer again. NOTES:

If there is no name matching the first letter of the key you press, the directory shows a name matching the following letters of the key. If you press a key (0-9) and no name starts with any of the letters on that key, the directory shows the entry matching the next letter in the directory. 62 Directory Dial, delete or edit directory entries To dial, delete or edit a directory entry (name and number), the entry must be displayed on the screen. Use Review the directory (page 61) or earch by name (page 62) to show an entry. Display dial To dial a displayed number from the directory, press HONE/FLAH or

/EAER EAER on the handset, or /EAER EAER on the telephone base. Delete a directory entry Using a cordless handset:

To delete the displayed directory entry, press MUTE/DELETE. Press MENU/ELECT to confirm. You cannot retrieve a deleted entry. Robert Brown Delete contact?

Using the telephone base:

To delete the displayed directory entry, press X/DELETE. Press MENU/ELECT to confirm. You cannot retrieve a deleted entry. Robert Brown Delete contact?

63 Directory Dial, delete or edit directory entries Edit a directory entry 1. When a directory entry displays, press MENU/ELECT. The screen shows EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 3. 2. To edit the number:

Press the dialing keys to add digits. Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a digit. Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all digits. Press and hold REDIAL/AUE to add a three-second dialing pause (a p appears). Linda Miller 888-722-7702 EDIT NUMBER 888-883-2445_ 3. Press MENU/ELECT to move on to the name. The screen shows EDIT NAME along with the name to be edited. EDIT NAME Robert Brown_ 4. To edit the name:

Press the dialing keys to add characters (page 60). Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character. Press and hold MUTE/DELETE on your handset or X/DELETE on your telephone base to erase all characters. Robert Brown 888-883-2445 5. Press MENU/ELECT to save the entry. There is a confirmation tone and the screen shows aved. 64

exhibit
download
text

1 2

User Manual Part II

Users Manual

pdf

3.16 MiB

/ February 05 2014

Directory Speed dial 1 where you can store The telephone system has nine speed dial locations (2-9, 0) and a voicemail access location the telephone numbers you wish to dial more quickly. You can store up to 30 digits in each location. Speed dial assignments can only be selected from the existing directory entries. The voicemail access number must be manually entered. In the directory, speed dial locations are indicated by their number on the bottom right hand corner of the entry. Assign a speed dial number 1. When the telephone is idle, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Directory. Press MENU/ELECT. 3. Press qCID or pDIR to scroll to peed dial. Press MENU/ELECT. 4. Press qCID or pDIR to choose your desired speed dial location (0 or 2-9), then press MENU/ELECT. The screen briefly shows Copy from Directory..., then displays the directory list. 5. Press qCID or pDIR to scroll to the phone number you wish to assign to the selected speed dial location. 6. Press MENU/ELECT to save the setting and return to the previous menu. There is a confirmation tone and the screen returns to the speed dial list.

-OR-

1. When the telephone is idle, press and hold any dialing keys

(0 or 2-9). Robert Brown 888-883-2445 2 Speed dial location Robert Brown 888-883-2445 p q 2 Speed dial location Answering sys

>Directory Add contact

>Speed dial

>2:Robert Brown 3:<Unassigned>

2. Press qCID or pDIR to choose your desired speed dial location (0 or 2-9), then press MENU/ELECT. The screen briefly shows Copy from Directory..., then displays the directory list. 3. Press qCID or pDIR to scroll to the phone number you wish to assign to the selected speed dial location. 4. Press MENU/ELECT to save the setting and return to the previous menu. There is a confirmation tone and the screen returns to the speed dial list. 65 Directory Speed dial Assign your voicemail speed dial number To assign your voicemail speed dial number to location or page 29. 1, see page 18 Reassign a speed dial number 1. When the telephone is idle, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Directory. Press MENU/ELECT. 3. Press qCID or pDIR to scroll to peed dial. Press MENU/ELECT. 4. Press qCID or pDIR to choose the location you wish to reassign, then press MENU/ELECT to show the directory entry. 5. Press MENU/ELECT again. 6. Scroll to Change D and then press MENU/ELECT. The screen briefly shows Copy from Directory..., then displays the directory list. 7. Press qCID or pDIR to scroll to the phone number you wish to reassign to the selected speed dial location. 8. Press MENU/ELECT to save the setting and return to the speed dial list. There is a confirmation tone. Robert Brown 888-883-2445 2 Copy from Directory... Linda Miller 888-722-7702 2 66 Directory Speed dial Delete a speed dial number 1. When the telephone is idle, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Directory. Press MENU/ELECT. 3. Press qCID or pDIR to scroll to peed dial. Press MENU/ELECT. 4. Press qCID or pDIR to scroll to the location you wish to delete the speed dial number from, then:

Press MUTE/DELETE on the handset or X/DELETE on the telephone base to delete the displayed speed dial number. There is a confirmation tone and the screen shows peed dial empty before returning to the speed dial list. Linda Miller 888-722-7702 2 Speed dial empty

>2:<Unassigned>

3:<Unassigned>

-OR-

i. Press MENU/ELECT to show the directory entry. ii. Press MENU/ELECT again. iii. Scroll to Clear D and then press MENU/ELECT to delete the displayed speed dial number. There is a confirmation tone and the screen shows peed dial empty before returning to the speed dial list. Make a call using speed dial When in idle mode, press and hold the dialing key (0 or 2-9) corresponding to the assigned location you wish to call.

-OR-

1. Press MENU/ELECT when in idle mode. 2. Press qCID or pDIR to scroll to Directory, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to peed dial, then press MENU/ELECT. 4. Press qCID or pDIR to scroll to the desired location (0 or 2-9) and then press HONE/FLAH or /EAER the telephone base. EAER on the handset, or /EAER EAER on Check your voicemail using speed dial 1 to dial the voicemail number you When in idle mode, press and hold have set. See page 18 or page 29 to set your voicemail speed dial number. 67 Caller ID About caller ID This product supports caller ID services offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Information about caller ID with call waiting Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call. It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:

You have both caller ID and call waiting, but as separate services (you may need to combine these services). You have only caller ID service, or only call waiting service. You dont subscribe to caller ID or call waiting services. There are fees for caller ID services. In addition, services may not be available in all areas. CHRISTINE SMITH 888-883-2445 NEW 10:01AM 10/15 This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date, along with the call information, are from the telephone service provider. Caller ID information may not be available for every incoming call. Callers may intentionally block their names and/or telephone numbers. You can only view a maximum of 15 digits of every caller ID log entry. To view caller ID log entries with numbers between 16 and 24 digits, you must save the entry to the directory (see page 73). CHRISTINE SMITH 888-883-2445 10/15 NEW q 10:01 AM NOTE: You can use this product with regular caller ID service, or you can use this products other features without subscribing to caller ID or combined caller ID with call waiting service. 68 Caller ID Caller ID history How the caller ID history (caller ID log) works The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to the telephone base and all handsets, so changes made using any handset or the telephone base are reflected in all other devices. If you answer a call before the information appears on the screen, it does not show in the caller ID log. NOTE: Each entry may have up to 24 digits for the phone number and 15 characters for the name. Missed (new) call indicator When a handset or the telephone base is in idle mode and has new or missed calls, its screen shows XX Missed calls. All new and missed entries are counted as missed calls. Each time you review a new caller ID log entry (indicated by NEW on the screen), the number of missed calls decreases by one. If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold OFF/CANCEL on the handset for four seconds when the handset is idle, or press and hold CANCEL on the telephone base for four seconds when the telephone base is idle. You will hear a confirmation tone. All the entries in the caller ID log become old

(reviewed already), and the missed calls message goes away. 69 HANDSET 1 HANDSET 1 6 Missed calls 10:01AM 10/15 10/15 Robert Brown 888-883-2445 NEW 09:30 AM 10/15 BASE 6 Missed calls 10/15 10:01AM AM MSG #

1 Robert Brown 888-883-2445 10/15 NEW p q 09:30 AM Caller ID Caller ID operation Memory match If the incoming telephone number matches the last 7 digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory. NOTE: The number shown in the caller ID log will be in the format sent by the telephone service provider. The telephone service provider usually delivers ten-digit phone numbers (area code plus telephone number). If the telephone number of the caller does not match a number in your directory, the name will appear as it is delivered by the telephone service provider. Chris 888-883-2445 NEW 10:01AM 10/15 Chris 888-883-2445 10/15 NEW q 10:01 AM 70 Caller ID Caller ID operation Review the caller ID log Review the caller ID log to find out who called, to return the call, or to copy the callers name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log. 1. When the handset or the telephone base is in idle mode, press qCID to review the caller ID log in reverse chronological order starting with the most recent call.

-OR-

Review the caller ID log by pressing MENU/ELECT. HANDSET 1 6 Missed calls 10:01AM 10/15 Press qCID or pDIR to scroll to Caller ID log, then press MENU/ELECT twice to select Review. Directory

>Caller ID log 2. Press qCID or pDIR to scroll through the list. 3. Press OFF/CANCEL on the handset or CANCEL on the telephone base to exit the caller ID log. You hear a double beep when the list reaches the beginning or end of the caller ID log. BASE 6 Missed calls 10/15 10:01 AM AM MSG #

1 Directory

>Caller ID log p q NOTE: Only one handset or the telephone base can review the caller ID log at a time. If another device tries to enter the directory or caller ID log, it shows Not available at this time. Time of call Date of call Callers name CHRISTINE SMITH SMITH 888-883-2445 NEW 10:01AM 10/15 Callers name CHRISTINE SMITH SMITH 888-883-2445 10/15 NEW p q 10:01AM Appears if it is a new and missed call. Callers number Appears if it is a new or missed call. Date of call Callers number Time of call 71 Caller ID Caller ID operation View dialing options Although the incoming caller ID log entries have ten digits (the area code plus the seven-digit number), in some areas, you may need to dial only the 7 digits, 1 plus the seven digits, or 1 plus the area code plus the seven digits. You can change and store the number of digits that you dial in the caller ID log. While reviewing the caller ID log, press # (pound key) repeatedly to show different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory. Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory. When the number is in the correct format for dialing, press HONE/FLAH or /EAER the handset, or /EAER on the telephone base to call the number. To save the number to the directory, see ave a caller ID log entry to the directory on the next page. 883-2445 1-883-2445 888-883-2445 1-888-883-2445 888-883-2445 1-888-883-2445 883-2445 1-883-2445 EAER on Press #

Press 1 Dial a caller ID log entry 1. When in the caller ID log, press qCID or pDIR to browse. 2. Press HONE/FLAH or /EAER the telephone base to dial the displayed entry. EAER on the handset, or /EAER on Delete caller ID log entries To delete an entry:

Press MUTE/DELETE on the handset or X/DELETE on the telephone base to delete the shown entry. Review

>Del all calls To delete all entries:

1. Press MENU/ELECT when in idle mode. 2. Press qCID or pDIR to scroll to Caller ID log, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Del all calls, then press MENU/ELECT. Review

>Del all calls p q 4. When the screen shows Delete all calls?, press MENU/ELECT to confirm. There is a confirmation tone and the screen returns to the previous menu. 72 Caller ID Caller ID operation ave a caller ID log entry to the directory 1. When in the caller ID log, press qCID or pDIR to browse. 2. Press MENU/ELECT to select an entry. 3. Press MENU/ELECT again to select Directory. 4. When the screen displays EDIT NUMBER, use the dialing keys to edit the number. Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to backspace and erase a digit. Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone base to erase the entire entry. Press and hold REDIAL/AUE to insert a three-second dialing pause

(a p appears). 5. Press MENU/ELECT to move to the name. 6. When the screen displays EDIT NAME, use the dialing keys (page 60) to edit the name. Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character. Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all characters. Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press

# (pound key). 7. Press MENU/ELECT when done. The screen shows aved. NOTES:

You may need to change how a caller ID number is dialed if the entry does not appear in the correct format. Caller ID numbers may appear with an area code that may not be necessary for local calls, or without a 1 that may be necessary for long distance calls (see View dialing options on page 72). If the callers name you received from the telephone service provider is all in capital letters, the first letter of every word remains a capital letter, while other letters become lowercase. However, the next letter after the prefix Mac, Mc, D, C or O, is kept as a capital letter. For example, the D in MacDonald is kept as a capital letter. Another exception is that VAN DER will be changed to Van der. If the telephone number from the caller ID information has already been saved in the directory under a different name, the new name will overwrite the old one. 73 Caller ID Reasons for missing caller ID information There are occasions when other information or no information shows for various reasons:

On-screen message PRIVATE NUMBER The caller prefers not to show the phone number. Reason PRIVATE NAME The caller prefers not to show the name. PRIVATE CALLER The caller prefers not to show the phone number and name. UNKNOWN NUMBER Your telephone service provider cannot determine the callers number. UNKNOWN NAME Your telephone service provider cannot determine the callers name. UNKNOWN CALLER Your telephone service provider cannot determine the callers name and telephone number. Calls from other countries may also generate this message. 74 Call block Call block Numbers saved into the call block list Incoming calls without numbers If you have subscribed to Caller ID service, you can use the call block feature to reject certain calls automatically. The call block list stores up to 20 entries. The telephone system can reject calls automatically according to:

This feature is only available on the telephone base. When a call is blocked, you will hear a simulated busy tone for one ring cycle. You may pick up the call during the first ring or at the time when the simulated busy tone is playing. If you do not pick up the call, it will be disconnected. Blocked call 888-722-7702 NOTE: The blocked calls are displayed as Blocked call in the caller ID log. 75 Call block Call block Add a call block entry 1. When the telephone base is in idle mode, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Call block, then press MENU/ELECT. 3. Press MENU/ELECT to choose Block list. 4. Press qCID or pDIR to scroll to Add new entry, then press MENU/ELECT. 5. Use the dialing keys to enter a telephone number

(up to 30 digits) when prompted. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE to erase a digit. Press and hold X/DELETE to erase all digits. Press and hold REDIAL/AUE to enter a three-

second dialing pause (a p appears). Caller ID log

>Call block p q

>Block list Calls w/o num p q Review

>Add new entry p q

-OR-

Copy a number from the redial list by pressing REDIAL/AUE then qCID, pDIR or pressing REDIAL/AUE repeatedly to locate the number. Press MENU/ELECT to copy the number. 6. Press MENU/ELECT to move on to the name. The display shows Number already saved if the number is already in the call block list. You cannot save the same number twice. 7. Use the dialing keys keys to enter a name (up to 15 characters) when prompted. Press a key repeatedly until the desired character shows on the screen. Press qCID or pDIR to move the cursor to the left or right. Press 0 to add a space. Press X/DELETE to erase a character. Press and hold X/DELETE to erase all characters. Press TONE to change the next letter to upper or lower case. 8. Press MENU/ELECT to store your call block entry. 76 Call block Call block Review the call block list 1. When the telephone base is in idle mode, press MENU/ELECT. 2. Press qCID or pDIR to scroll to Call block, then press MENU/ELECT. 3. Press MENU/ELECT again to choose Block list. 4. Press MENU/ELECT again to choose Review. 5. Press qCID or pDIR to browse through the call block

>Review Add new entry p q entries. NOTE: Block list is empty appears if there are no call block entries. ave a caller ID log entry to call block list 1. Search for the desired caller ID log entry (see Review the caller ID log on page 69). 2. When the desired entry displays, press MENU/ELECT. 3. Press qCID or pDIR to scroll to Call block, then press MENU/ELECT. 4. When the screen displays EDIT NUMBER, use the dialing keys to edit the number. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE on the telephone base to backspace and erase a digit. Press and hold X/DELETE on the telephone base to erase the entire entry. Press and hold REDIAL/AUE to insert a three-second dialing pause

(a p appears). 5. Press MENU/ELECT to move on to the name. 6. When the screen displays EDIT NAME, use the dialing keys to edit the name. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE on the telephone base to erase a character. Press and hold X/DELETE on the telephone base to erase all characters. Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press #

(pound key). 7. Press MENU/ELECT when done. The screen shows aved. 77 Call block Call block Edit a call block entry 1. Search for the desired call block entry (see Review the call block list on page 77). 2. When the desired entry displays, press MENU/ELECT. The screen shows EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 4. 3. To edit the number:

Use the dialing keys to enter digits. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE to erase a digit. Press and hold X/DELETE to erase all digits. Press and hold REDIAL/AUE to add a three-second dialing pause (a p appears). Salesman 888-722-7702 p q EDIT NUMBER 888-722-7702_ p q EDIT NUMBER TV Salesman_ p q 4. Press MENU/ELECT to move on to the name. The screen shows EDIT NAME along with the name to be edited. 5. To edit the name:

Use the dialing keys to enter characters. Press qCID or pDIR to move the cursor to the left or right. Press X/DELETE to erase a character. Press and hold X/DELETE to erase all characters. 6. Press MENU/ELECT to save the entry. The screen shows aved. 78 Call block Call block Delete a call block entry 1. Search for the desired call block entry (see Review the call block list on page 77). 2. When the desired entry displays, press X/DELETE on the telephone base. 3. Press MENU/ELECT to confirm. The next entry displays. You cannot retrieve a deleted entry. NOTE: If the call block list is empty after an entry is deleted, the telephone base displays Block list is empty. Block calls without number You can use this feature to reject all incoming calls which are out of area or with numbers set to Private. 1. When the telephone base is in idle mode, press Block list

>Calls w/o num p q

>Not block Block p q MENU/ELECT. 2. Press qCID or pDIR to scroll to Call block, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Calls w/o num, then press MENU/ELECT. 4. Press qCID or pDIR to select Not block or Block, then press MENU/ELECT. 79 Answering system Answering system settings Use the answering system menu of a system handset or the telephone base to set up the announcement message, turn on or off the answering system or message alert tone, activate call screening, or change the number of rings, remote access code or message recording time. If you turn off the answering system and you change any setting in the answering system setup menu, the answering machine automatically turns on again. Play messages

>Answering sys 1. When the device is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. Announcement Your outgoing announcement plays when calls are answered by the answering system. The telephone has a default outgoing announcement, Hello. Please leave a message after the tone. You can use this announcement, or record your own. You can record an announcement up to 90 seconds. The system does not record any announcement shorter than two seconds. To play your current outgoing announcement:

Using a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to

>Announcement Delete all old enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press MENU/ELECT again to select Announcement. 4. Press qCID or pDIR to scroll to lay annc, then press MENU/ELECT. Record annc

>Play annc Using the telephone base:

>Announcement Delete all old p q Record annc

>Play annc p q MENU/ELECT. 80 Answering system Answering system settings To record a new outgoing announcement:

Using a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press MENU/ELECT again to select Announcement. 4. Press MENU/ELECT to select Record annc. The system announces, Record after the tone. Press 5 when you are done.

>Record annc Play annc 5. Speak towards the handset to record your announcement. Press 5 to end recording. Your recorded announcement plays. To listen to the recorded announcement again, scroll to lay annc and press MENU/ELECT. Using the telephone base:

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. Play annc

>Record annc p q 3. Press MENU/ELECT again to select Announcement. 4. Scroll to Record annc and press MENU/ELECT. The system announces, Record after the tone. Press 5 when you are done. 5. Speak towards the telephone base to record your announcement. Press 5 to end recording. Your recorded announcement plays. To listen to the recorded announcement again, scroll to lay annc and press MENU/ELECT.

-OR-

1. When the telephone base is in idle mode, press

/RECORD. 2. Press qCID or pDIR to scroll to Announcement and press MENU/ELECT. The system announces, Record after the tone. Press 5 when you are done. 3. Speak towards the telephone base to record your announcement. Press 5 to end recording. Your recorded announcement plays. Record memo

>Announcement p q 81 Answering system Answering system settings To delete or reset your outgoing announcement:

Using a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press MENU/ELECT again to select Announcement. 4. Press qCID or pDIR to scroll to lay annc, then press MENU/ELECT. 5. While the announcement is playing, press MUTE/DELETE to delete the announcement. The screen shows Annc. Deleted.

-OR-

1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press MENU/ELECT again to select Announcement. 4. Press qCID or pDIR to scroll to Reset annc, then press MENU/ELECT. The screen shows Reset to default annc?

5. Press MENU/ELECT again to confirm. The screen shows Annc. reset to default. Using the telephone base:

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press MENU/ELECT again to select Announcement. 4. Press MENU/ELECT again to select lay annc and play the announcement. 5. While the announcement is playing, press X/DELETE to delete the announcement. The screen shows Annc. Deleted. When your announcement is deleted, the system answers calls with the default announcement described on page 80. You cannot delete the default announcement. 82 Answering system Answering system settings Answer on/off Unless you change it, the answering system is on and ready to record messages. You can turn the answering system off, but if you do so, the answering system does not answer calls and record incoming messages. To turn the answering system on or off:

Using a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to Play messages

>Answering sys enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Answer ON/OFF, then press MENU/ELECT. 4. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT to save the setting. You hear a confirmation tone. When the answering system is on, the handset shows AN ON. Record memo

>Answer ON/OFF ANSWER ON/OFF

>On Using the telephone base:

Press /AN ON/OFF to turn the answering system on or off. If the answering system is turned on, it announces, Calls will be answered. If the answering system is turned off, it announces, Calls will not be answered.

-OR-

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Answer ON/OFF, then press MENU/ELECT. 4. Press qCID or pDIR to highlight On or Off, then press MENU/ELECT to save the setting. You hear a confirmation tone. NOTE: If the answering system is off and there is an incoming call, the system answers after ten rings and announces, Please enter your remote access code. For more information about remote access, see page 101. 83 Answering system Answering system settings Voice guide This feature is an alternative way for you to do the basic setup of the answering system. You can follow the voice guide to record your own announcement, set the number of rings, and set the message alert tone. This feature is only available in the telephone base. 1. 2. 3. 4. 5. When the telephone base is in idle mode, press MENU/ELECT. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. Press qCID or pDIR to scroll to Voice guide, then press MENU/ELECT. You hear a voice prompt Hello! This voice guide will assist you with the basic setup of your answering system. Set up your answering system by inputting designated numbers as instructed in the voice guide. Answer ON/OFF

>Voice guide p q Setup Ans sys... NOTES:

You can press CANCEL to quit the voice guide at any time. If the system does not receive any input, it will announce Sorry, I still have not received any input. If you want to restart the voice guide, please enter the menu and select Voice guide under Answering system. Good bye. After a power outage, the system prompts you to set the date and time. After the date and time setting is done or skipped, the system will prompt if you want to set up the answering system via voice guide. Press MENU/ELECT to start the setup. 84 Answer ON/OFF

>Ans sys setup

>Call screening

# of rings CALL SCREENING

>On Voice guide

>Ans sys setup p q

>Call screening

# of rings p q CALL SCREENING

>On p q Answering system Answering system settings Call screening Use this feature to choose whether incoming messages can be heard over the speaker when they are being recorded. If you turn call screening on, you hear the incoming message. While monitoring an incoming message, you can answer the call by pressing HONE/FLAH on the handset, or /EAER EAER on the telephone base. To change the setting:

Using a cordless handset or the telephone base:

1. When the handset or telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Ans sys setup, then press MENU/ELECT. 4. Press MENU/ELECT to select Call screening. 5. Press qCID or pDIR to choose On or Off. 6. Press MENU/ELECT to save the setting. You hear a confirmation tone. NOTE: For more information on call screening, see page 92. 85 Answering system Answering system settings Number of rings You can set the answering system to answer an incoming call after two, three, four, five or six rings. You can also select toll saver. If toll saver is selected, the answering system answers a call after two rings when you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges when calling from out of your local area. By default, the answering system answers an incoming call after four rings. To set the number of rings:

Using a cordless handset or the telephone base:

># of rings

# OF RINGS

>4 4. Press qCID or pDIR to scroll to # of rings, then press MENU/ELECT. 5. Press qCID or pDIR to choose among 2, 3, 4, 5, 6 or Toll saver. 6. Press MENU/ELECT to save the setting. You hear a confirmation tone. NOTES:

Call screening

># of rings p q

# OF RINGS

>4 p q If you subscribe to voicemail service through your telephone service provider, see Answering system and voicemail indicators on page 90. If you set the number of rings for the answering system as two or three rings, the caller ID announce feature may not have enough time to announce the callers full information. 86 Answering system Answering system settings Remote access code To access your answering system remotely from any touch-

tone phone, you need to enter a two-digit number (00-99). By default, the remote access code is 19. To change the remote access code:

Using a cordless handset or the telephone base:

1. When the handset or telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. Play messages

>Answering sys Answer ON/OFF

>Ans sys setup 3. Press qCID or pDIR to scroll to Ans sys setup, then press MENU/ELECT. REMOTE CODE 19 4. Press qCID or pDIR to scroll to Remote code, then press MENU/ELECT. 5. Use the dialing keys to enter a two-digit number. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to backspace and delete a digit. 6. Press MENU/ELECT to save the setting. You hear a confirmation tone. Play messages

>Answering sys p q Voice guide

>Ans sys setup p q REMOTE CODE 19 87 Answering system Answering system settings Message alert tone When the message alert tone is set to On, and there is at least one new message, the telephone base beeps every ten seconds. Unless you change it, the message alert tone is set to off. There is no audible alert at the handset. To change the setting:

Using a cordless handset or the telephone base:

The message alert tone beeps only if all the conditions below are met:

- Answering system is on.

- Message alert tone setting is on.

- There are new messages. To temporarily turn off the message alert tone, see page 93. Remote code

>Msg alert tone MSG ALERT TONE

>On Remote code

>Msg alert tone p q MSG ALERT TONE

>On p q 88 Answering system Answering system settings Message recording time You can set the recording time allowed for incoming messages. The message length is three minutes by default. To change the setting:

Using a cordless handset or the telephone base:

1. When the handset or telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys, then press MENU/ELECT. 3. Press qCID or pDIR to scroll to Ans sys setup, then press MENU/ELECT. 4. Press qCID or pDIR to scroll to Recording time, then press MENU/ELECT. 5. Press qCID or pDIR to choose 3 minutes, 2 minutes or 1 minute, then press MENU/ELECT to save the setting. You hear a confirmation tone. Msg alert tone

>Recording time RECORDING TIME

>3 minutes Msg alert tone

>Recording time p q RECORDING TIME

>3 minutes p q 89 Answering system About the answering system Answering system and voicemail indicators Your telephone has separate indicators for two different types of voice messages: those left on its built-in digital answering system and those left at your telephone service providers voicemail (fees may apply). Your telephones built-in digital answering system messages and voicemail messages are separate. Each alerts you to new messages differently. and XX New messages show on the handset and If the telephone base, there are new messages in the built-in answering system. To listen to messages recorded on your digital answering system, press telephone base (page 94). If the telephone base, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN. and New voicemail display on the handset and

/LAY/TO on the HANDSET 1 1 New message ANS ON 10:01AM 10/15 Some telephone service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider. To use your voicemail service rather than your answering system, turn off your answering system. To use your answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. NOTE: After reviewing all new messages, the number of old messages appears on the message counter. 90 Answering system About the answering system Using the answering machine and voicemail together You can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers as described below. To learn how to program your voicemail settings, contact your telephone service provider. If you are on a call, or the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting. Message capacity The answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to three minutes, and the maximum recording time is approximately 22 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them. When there are new messages (including memos) on the answering system, the number of messages stored shows in the message counter. If the answering system has less than three minutes of recording time left, it announces, Less than three minutes to record, before message playback at the handset or the telephone base. Rec mem low displays on the device screen in idle mode. When you turn on the answering system at the telephone base, it announces, Calls will be answered. Less than three minutes to record. If the memory is full, the answering system announces, Memory is full, before message playback. The device screen displays Rec mem full in idle mode. Once the memory is full, you cannot turn the answering system back on if it has been turned off, nor can you record new messages until old ones have been deleted. Memory full displays if you want to turn on the answering system on the handset but there is no memory. 91 Answering system About the answering system Voice prompts The system provides voice prompts to guide you through the setup procedures at the telephone base, message playback, remote access and recording outgoing announcements. Call screening To screen a call at the telephone base:

If the answering system and call screening are on (see Call screening on page 85), the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system. Options while a message is being recorded:

/LAY/TO or CANCEL to temporarily silence the Press q/VOLUME/p on the telephone base to adjust the call screening volume. Press call screening. Press screening is set to off. Press /EAER EAER to answer the call.

/LAY/TO to temporarily turn on the call screening if call To screen a call at the handset:

While a message is being recorded, the handset shows To screen call, press [ELECT]. Press MENU/ELECT to screen the call. Options while a message is being recorded:

Press qCID/VOLUME or pDIR/VOLUME on the handset to adjust the call screening volume. Press OFF/CANCEL to temporarily silence the call screening. Press MENU/ELECT to temporarily turn on the call screening if call screening is set to off. Press /EAER message through the speakerphone. Press again to turn off the speakerphone. EAER to broadcast the announcement and the incoming 92 Answering system About the answering system Call intercept While screening a call, you can stop recording and speak to the caller by pressing HONE/FLAH on the handset or /EAER EAER on the telephone base. Base ringer Press q/VOLUME/p on the telephone base to adjust the ringer volume when the telephone is not in use. You hear a sample of the ringer while adjusting the volume. The telephone base shows Ringer off when you set the volume to 0. Temporarily turning off the message alert tone If the message alert tone is turned on, the telephone base beeps every ten seconds when there are new messages. Pressing any telephone base key (except /HANDET LOCATOR) temporarily silences the message alert tone. If you press X/DELETE when in idle mode to temporarily turn off the message alert tone, there is a voice prompt directing you to press X/DELETE again to delete all old messages. The message alert tone is temporarily off. Only press X/DELETE a second time if you wish to erase all old messages in your answering system. The message alert tone resumes when you receive another message. 93 Answering system Message playback If you have new messages, you hear only the new messages in chronological order. If there are no new messages, the system plays back all the messages

(in chronological order). If there are both new and old messages, you have the option of playing the new or old messages by accessing the menu. When playback begins, the total number of messages is announced. Before each message, you hear the day and time of the recording. If the date and time are not set, you hear, Time and date not set, before playback. After the last message, you hear, End of messages. If the recording time is less than three minutes, you hear, Less than three minutes to record before playback (see Message capacity on page 91). To listen to messages at the telephone base:

Press the messages.

/LAY/TO on the telephone base to listen to If there are new and old messages, press qCID or pDIR to select lay new msgs or lay old msgs, then press MENU/ELECT or If there are only new or only old messages, they will play automatically.

/LAY/TO.

-OR-

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press MENU/ELECT again to select lay messages. If there are new and old messages, press qCID or pDIR to select lay new msgs or lay old msgs, then press MENU/ELECT or If there are only new or only old messages, they will play automatically.

/LAY/TO.

>Play messages Answering sys p q

>Play new msgs Play old msgs p q You have:

3 New messages The system announces the number of messages, then begins playback. The message sequence is shown on the telephone base. If there are no recorded messages, the telephone base shows No messages and you hear, You have no message. NEW MSG #1/3 Charlie Johnson 10/15 NEW 10:01AM 94 Answering system Message playback To listen to messages on a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press MENU/ELECT again to select lay messages. If there are new and old messages, press qCID or pDIR to select lay new msgs or lay old msgs, then press MENU/ELECT. If there are only new or only old messages, they will play automatically. The system announces the number of messages, then begins playback. The message sequence is shown on the handset. If there are no recorded messages, the handset shows No messages and you hear, You have no message.

>Play new msgs Play old msgs AN ON You have:

3 New messages AN ON Charlie Johnson 4-Repeat 6-Skip 10:01AM AN ON NEW MG#

1/3 Options during playback When a message is playing, you can adjust the playback volume, skip, repeat, pause or delete the message. When messages are playing on the telephone base:

Press q/VOLUME/p to adjust the message playback volume. Press /I to skip to the next message. Press /REEAT to repeat the message. Press twice to hear the previous message. Press X/DELETE to delete the message.

/LAY/TO to stop the playback. Press EAER to stop playback. The screen shows Call back?, then Press /EAER press MENU/ELECT, or /EAER EAER to call back the caller if the callers number is available. If the dialing format used is not correct, then use the option below to choose the correct dialing format before calling back the caller. Press MENU/ELECT to pause playback and show the caller ID information if available. From here, you can press CANCEL to resume playback, or press # (pound key) repeatedly to show the desired dialing option

(page 72), then press /EAER EAER to call back the caller. If you do not call back within ten seconds, message playback resumes automatically. 95 Answering system Message playback When messages are playing on the handset:

to adjust the message playback audio quality. EAER to switch between speakerphone mode and Press qCID/VOLUME or pDIR/VOLUME to adjust the message playback volume. Press EQ Press 6 to skip to the next message. Press 4 to repeat the message. Press twice to hear the previous message. Press MUTE/DELETE to delete the message. Press 5 or OFF/CANCEL to stop the playback. Press /EAER handset mode. Press HONE/FLAH to stop playback. The screen shows Call back?, then press MENU/ELECT, HONE/FLAH, or /EAER caller if the callers number is available. If the dialing format used is not correct, then use the option below to choose the correct dialing format before calling back the caller. Press MENU/ELECT to pause playback and show the caller ID information if available. From here, you can press # (pound key) repeatedly to show the desired dialing option (page 72), then press HONE/FLAH to call back the caller. You can also press OFF/CANCEL to resume playback. If you do not call back within ten seconds, message playback resumes automatically. EAER to call back the NOTE: The equalizer stays on the same settings until you change it by pressing EQ . 96 Answering system Message playback Delete all old messages You can only delete old (reviewed) messages. You cannot delete new messages until you review them. You cannot retrieve deleted messages. To delete all old messages on the telephone base:

1. When the telephone is idle, press X/DELETE. The system announces, To delete all old messages, press DELETE again. 2. Press X/DELETE again. The system announces, All old messages deleted.

-OR-

1. Press MENU/ELECT when in idle mode to enter the Announcement

>Delete all old main menu. 2. Press qCID or pDIR to scroll to Answering sys. Press MENU/ELECT. 3. Press qCID or pDIR to highlight Delete all old, then press MENU/ELECT. The screen shows Delete all old messages?

p q Delete all old messages?

4. Press MENU/ELECT again to confirm. The screen Deleting... displays Deleting... then All old msgs deleted! There is a confirmation tone. To delete all old messages on the handset:

1. Press MENU/ELECT when in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys. Press MENU/ELECT. 3. Press qCID or pDIR to highlight Delete all old, then press MENU/ELECT. The screen shows Delete all old messages?

4. Press MENU/ELECT again to confirm. The screen displays Deleting... then All old msgs deleted! There is a confirmation tone. Announcement

>Delete all old Delete all old messages?

Deleting... 97 Answering system Recording and playing memos Memos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset or the telephone base. Play and delete them in the same way as incoming messages. Record a memo Using a cordless handset:

1. When the handset is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys. Press Play messages

>Answering sys MENU/ELECT. 3. Press qCID or pDIR to highlight Record memo, then press MENU/ELECT. The system announces, Record after the tone. Press 5 when you are done. You can record a memo for up to four minutes. Delete all old

>Record memo 4. Speak towards the handset to record a memo. 5. Press 5 to stop recording. The system announces, Recorded. The system does not save memos shorter than two seconds. RECORD MEMO... 5-Stop 98 Answering system Recording and playing memos Using the telephone base:

1. When the telephone base is in idle mode, press MENU/ELECT to enter the main menu. 2. Press qCID or pDIR to scroll to Answering sys. Press MENU/ELECT. 3. Press qCID or pDIR to highlight Record memo, then press MENU/ELECT. The system announces, Record after the tone. Press 5 when you are done. You can record a memo for up to four minutes. Delete all old

>Record memo p q 4. Speak towards the telephone base to record a memo. 5. Press 5 to stop recording. The system announces, Recorded. The system does not save memos shorter than two seconds.

-OR-

1. When the telephone base is in idle mode, press

/RECORD. 2. Press /RECORD again or press MENU/ELECT to select Record memo. The system announces, Record after the tone. Press 5 when you are done. 3. Speak towards the telephone base to record a memo. 4. Press 5 to end recording. The system announces,

>Record memo Announcement p q Recorded. The system does not save memos shorter than two seconds. lay back a memo Play memos the same way as messages. See Message playback on page 94. 99 Answering system Answering system Base message counter displays The base message counter shows the total number of answering system messages. See the table below for other message counter displays. Message counter displays 0 1-99

- -

No messages. Total number of messages and memos. The system is answering a call, or someone is trying to reach it remotely. The system is in program mode. 100 Answering system Remote access You can reach your answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely reach your answering system:

1. Dial your telephone number from any touch-tone telephone. 2. When the system answers, enter the two-digit remote access code (19 is the default code. See page 87 to change it). The system automatically announces the number of new or old messages (if any), and then begins to play them. 3. You can also enter the following remote commands:

Remote commands 1 2 3 33 4 5

*5 6

*7 8 0 Press to listen to all messages. Press to listen to new messages only. Press to delete the current message (during playback). Press twice to delete all old messages. Press to repeat the current message (during playback). Press to stop any operation (including recording). Press to listen to a list of remote commands. Press to skip to the next message (during playback). Press to record a new announcement. Press to end remote access (the call will be terminated). Press to turn the answering system on or off. 4. Hang up or press 8 to end the calls. 101 Answering system Remote access Cut out and carry the remote access wallet card at the back of this users manual for quick reference. NOTES:

If you do not enter a valid remote access code, the system answers the call automatically. If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically. If the memory is full, the answering system answers after ten rings and announces, Memory is full. Enter the remote access code. Enter your remote access code to access the messages and announcements. 102 Appendix Adding and registering handsets/headsets/speakerphones Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model CL80114, sold separately) or up to ten cordless handsets and two cordless headsets or speakerphones (sold separately). Visit www.telephones.att.com/headsets for a list of compatible DECT 6.0 cordless headsets. Each new handset, headset or speakerphone must be registered to the telephone base before use. You must register each handset, headset or speakerphone separately. To register a cordless headset or speakerphone to this telephone system, please refer to the corresponding users manual for details. To register a cordless handset, see below. The handsets provided within your product box are already registered as HANDET 1 and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDET 12). Register a handset to the telephone base 1. Before you begin registration, make sure the handset is out of the telephone base or charger and shows To register H, see manual. 2. Put the handset you wish to register on the telephone base cradle. 3. Both the handset and the telephone base show Registering... lease wait and the IN UE light on the telephone base turns on. HANDET X Registered appears on both the handset and the telephone base screens

(HANDET represents the handset name, X represents the handset number). Both the handset and the telephone base beep and the IN UE light turns off. The handset is now registered with the telephone base. To register HS, see manual. Registering... Please wait HANDSET X Registered 103 Appendix Adding and registering handsets/headsets/speakerphones If registration fails, the system will automatically try to register again. If registration fails after the third try, Registration failed appears on both screens. The handset shows To register H, see manual and the telephone base returns to idle mode. This may take up to five minutes to occur. Please start again from Step 1. For registration, put the handset on the telephone base, not the handset charger. NOTES:

You cannot register a handset if any other system handset is in use. If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are full and sounds two beeps. 104 Appendix Deregistering handsets You may need to deregister your handsets if:

-OR-

You have 12 registered handsets and need to replace a handset. You wish to change the designated handset number of your registered handsets. You must first deregister ALL handsets, and then register each handset you wish to use again, one at a time. lease read carefully through all the instructions on this page before beginning the deregistration process. Deregister all handsets from the telephone base In addition to the cordless handsets, this operation will also deregister all cordless headsets and speakerphones registered to your telephone base. 1. Make sure that all handsets are out of the telephone base and chargers before you begin deregistration. 2. Press and hold /HANDET LOCATOR on the telephone base for about ten seconds (until the IN UE light starts to flash). The telephone base screen shows Registering... lease wait for five seconds, then it shows Deregister all devices?

Release /HANDET LOCATOR. 3. Immediately press /HANDET LOCATOR while the IN UE light is still flashing. (If the light stops flashing, start again with Step 1 above.) 4. It takes up to ten seconds to complete the deregistration process. Before registering the handset again, wait for the cordless handset screen to display To register H, see manual. 5. To register the handset(s) to the telephone base again, follow the registration instructions on the previous page. NOTES:

If the deregistration process fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handsets if any other system handset is in use. Even if the battery is depleted, you can still deregister the handsets by following the steps above. After the handset is charged for at least ten minutes, the screen shows To register H, see manual. If in Step 2 above you already have 12 registered handsets, the telephone base shows Registration slots are full and sounds two beeps. Continue holding /HANDET LOCATOR until Deregister all devices? displays. 105 Appendix Alert tones and lights Handset screen icons Battery status - battery is charging (animated display). Battery status - low battery (flashing); place the handset in telephone base or charger to recharge. AN ON MUTE NEW MG#

1/3 10:01AM peakerphone - the speakerphone is in use. Ringer off - the handset ringer is off. New voicemail - you have new voicemail from your telephone service provider. AN ON Answering system on - the answering system is turned on to answer calls. Message - new message in the built-in answering system. NEW New caller ID log - new and missed calls. MUTE MUTE - the handset microphone is off. MG #

1/2 Message counter - number of message playing/total number of messages. Telephone base screen icons Ringer off - the telephone base ringer is off. New voicemail - you have new voicemail from your telephone service provider. 2/11 NEW p q 10:21 AM MSG #

1 NEW MSG #

1 New caller ID log - new and missed calls. Message counter - total number of messages. 106 Appendix Alert tones and lights Handset alert tones One short beep One long beep Two short beeps Confirmation tone

(three rising tones) Four beeps Tone of each key press, if key tone is turned on. Indication to begin recording a message, memo or announcement. You are pressing qCID or pDIR on a cordless handset when the volume is already at its highest or lowest setting.

-OR-

Call waiting tone.

-OR-

Error tone. The system has completed the command successfully. The other party has ended your intercom call.

-OR-

The handset has gone out of range from the base during a call. Four short beeps Low battery warning. Telephone base alert tones One short beep One long beep Two short beeps Confirmation tone

(three rising tones) Tone of each key press, if key tone is turned on. Indication to begin recording a message, memo or announcement. Indicates the start of message recording during call screening or the end of a message playback session. You are pressing q/VOLUME/p on the telephone base when the volume is already at its highest or lowest setting.

-OR-

Call waiting tone.

-OR-

Error tone.

-OR-

Registration slots are full. The system has completed the command successfully. Four beeps The other party has ended your intercom call. Four short beeps Registration failure tone. Beeps every ten seconds Message alert. 107 Appendix Alert tones and lights Lights Lighted display IN UE On when the telephone base is in use, or when the answering system is answering an incoming call. On when a handset is being registered. Flashes quickly when there is an incoming call or when handsets are being deregistered. Flashes when another telephone is in use on the same line.

/LAY/TO On when a message is playing.

/ANWER ON On when the answering system is on.

/EAER EAER On when the speakerphone is on. MUTE On when the microphone is muted. Extra large display CHARGE light On when the handset is charging in the telephone base or charger. Big lighted buttons

/EAER EAER On when the speakerphone is on. 108 Appendix Screen display messages creen messages BASE 0 is calling Blocked call Block list is empty Call transferred Caller ID log empty Calling BASE 0 Calling HANDSET X Call answered Contact deleted Directory empty Directory full Ended HANDSET X is calling Incoming call Intercom Intercom ended INTERCOM TO:

Line in use Low battery Microphone ON Muted New voicemail The telephone base is calling. An incoming call is blocked. There are no block list entries. You have transferred an outside call to another device. There are no entries in the caller ID log. The handset is calling the telephone base (for intercom calls). The handset or telephone base is calling another handset (for intercom calls). The telephone base is transferring an outside call to a handset. The answering system has answered an incoming call. A directory entry is deleted. There are no directory entries. The directory is full. You cannot save any new entries unless you delete some current entries. You have just ended a call. Another system handset is calling. There is a call coming in. The device is on an intercom call. The intercom call has just ended. You have started the intercom process, and need to enter the number of the device you wish to call. An extension phone, or one of the devices is in use. The battery is low. You should charge the battery. Mute is off so the other party can hear your voice. The microphone is off. The other party cannot hear you. There are new voicemail messages from your telephone service provider. 109 Appendix Display screen messages creen messages No battery No line No answer. Try again No caller info Number already saved Not available at this time No Incoming PTT Out of range OR No pwr at base

** Paging **

Paging all handsets The handset in the charger has no battery installed. There is no telephone line connection. The device(s) you are trying to transfer a call to is out of range, off hook, or has no power. The caller information is unavailable. The telephone number you have entered is already in the directory or call block list. Someone else is already using the directory or caller ID log. The incoming PTT function is turned off. The handset will not receive PTT calls. The telephone base has lost power, or the handset is out of range. The cordless handset is paged by the telephone base. The telephone base is paging all cordless handsets. Phone The handset is on a call. Place in charger Quiet mode on Quiet mode is off Rec mem full Rec mem low Recording message The battery is very low. The handset should be charged. QUIET mode is on. QUIET mode is turned off. The system recording time is full. The system recording time is low. The telephone is recording a message. The handset is registering to the telephone base. The telephone base has the maximum of 12 handsets registered to it. Registering... Please wait Registeration slots are full Registration failed The handset registration is not successful. Ringer off Ringer muted Saved The ringer is turned off. The ringer is off temporarily while the device is ringing. An entry has been successfully saved in the directory. 110 Appendix Display screen messages creen messages Setup Ans sys... The telephone base is playing voice guide. Speaker TRANSFER TO:

To register HS, see manual. To screen call, press [SELECT]

Unable to call. Line in use Unable to call. Try again XX Missed calls XX New messages The handset or telephone base speakerphone is in use. You have started transferring a call, and need to enter the desired device number or choose all devices. Screen display before handset registration. Press MENU/ELECT to activate call screening. Failed phone call (the telephone line is in use). You try to join a call when there are already four handsets on that call. You try to make an outside call when another device is transferring a call with the intercom feature. There are new calls in the caller ID log. There are new messages in the answering system. 111 Appendix Troubleshooting If you have difficulty with your phone please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. My telephone doesnt work at all. Make sure the power cord is securely plugged in. Make sure you plug the battery connector securely into the cordless handset. Make sure you plug the telephone line cord securely and firmly into the telephone base and the telephone wall jack. Charge the battery in the cordless handset for at least ten hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. See page 9 for details. Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. You may need to purchase a new battery. Please refer to Battery installation and charging in this users manual on pages 9-10. I cannot get a dial tone. Try all the suggestions above. Move the cordless handset closer to the telephone base. You may have moved out of range. If the previous suggestions do not work, disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone. If there is no dial tone on that other telephone either, then the telephone line cord may be defective: try installing a new telephone line cord. If changing the telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective, try using a different wall jack in your home to connect your CL83214/

CL83314/CL83414 telephone, or contact your telephone service provider (charges may apply). 112 Appendix Troubleshooting I cannot dial out. Try all the suggestions above. Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room with less background noise. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). My cordless handset isnt performing normally. Make sure you plug the power cord securely into the telephone base. Plug the power adapter into a different working electrical outlet without a wall switch. Move the cordless handset closer to the telephone base. You may have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Out of range OR No pwr at base appears on my cordless handset. Ensure you plug the telephone base in properly and the power is on. Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize. Move the cordless handset closer to the telephone base. You may have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. 113 Appendix Troubleshooting The batteries do not hold a charge. If the cordless handset is in the telephone base or charger and the charge light is not on, refer to The charge light is off or blinking (page 116). Charge the battery in the cordless handset for at least ten hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 9 for details. You may need to purchase a new battery. Please refer to Battery installation and charging in this users manual on pages 9-10. I get noise, static, or weak signals even when Im near the telephone base. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 8). The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters. You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Move your phone to a higher location. The phone may have better reception in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). 114 Appendix Troubleshooting I experience poor sound quality when using the handset speakerphone. For increased sound quality while using the handset speakerphone, place the handset on a flat surface with the dial pad facing up. I hear other calls while using my phone. Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider. My cordless handset does not ring when I receive a call. Make sure that the ringer is not off. Refer to Ringer volume on page 14 in this users manual. Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack. Make sure you plug in the power cord securely. The cordless handset may be too far from the telephone base. Charge the battery in the cordless handset for at least ten hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. The layout of your home or office may be limiting the operating range. Try moving the telephone base to another location, preferably to a higher location. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply). Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from electronic devices such as television sets, VCRs, or other cordless telephones. Remove the battery. Install the battery again and place the cordless handset into the telephone base. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. Your line cord may be defective. Try installing a new line cord. 115 Appendix Troubleshooting My calls cut in and out while Im using my cordless handset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Move your telephone base to a higher location. The phone may have better reception when installed in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). The charge light is off or blinking. Make sure you plug the power and line cords in correctly and securely. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Clean the cordless handset, charger and telephone base charging contacts each month with a pencil eraser or cloth. A blinking CHARGE light is an indication that the battery is not connected to the handset or is missing completely. Ensure that the battery is installed properly. 116 Appendix Troubleshooting My caller ID isnt working. Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. The caller may be calling from an area that supports caller ID. Both your and the callers telephone service providers must use caller ID compatible equipment. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 8). The filter prevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about DSL filters. ystem does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. Incomplete messages. If a caller leaves a very long message, part of it may be lost when the system disconnects the call after the maximum recording time you have set. If the caller pauses for longer than seven seconds, the system stops recording and disconnects the call. If the systems memory becomes full during a message, the system stops recording and disconnects the call. If the callers voice is very soft, the system may stop recording and disconnect the call. Difficulty hearing messages. Press VOLUME/p to increase the telephone base speaker volume. Press pDIR/VOLUME to adjust the message playback volume on a handset. 117 Appendix Troubleshooting ystem does not answer after the correct number of rings. Make sure that the answering system is on. AN ON should show on the handset and the /AN ON light on the telephone base should be on. If toll saver is activated, the number of rings changes to two when you have new messages stored (pages 86). If the memory is full or the system is off, the system will answer after ten rings. In some cases, the answering system is affected by the ringing system used by your telephone service provider. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers

(pages 86). To determine how many rings activate your voicemail, contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. ystem announces, Time and day not set. You need to reset the system clock (page 15 or page 26). Outgoing announcement is not clear. When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the handset or the telephone base. Make sure there is no background noise (TV, music, etc.) while recording. New voicemail and show on the screens, and I dont know why. Your telephone has both a built-in answering system and voicemail indication. If New voicemail and appear on the screens, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them. Contact your telephone service provider for more information on how to access your voicemail. I cannot retrieve voicemail messages. Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 90). If you subscribe to voicemail service from your telephone service provider, contact your telephone service provider for more information on how to access your voicemail. Ive set my LCD language to panish or French and I dont know how to change it back to English. Press MENU/ELECT on your handset or base in idle mode, then enter 364# on the handset or base. You hear a confirmation tone. 119 Appendix Troubleshooting I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesnt work. Make sure your computer is powered on. Make sure your Internet connection is working properly. Make sure that the software is installed and running for your nontraditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug it into a multiple port USB hub (USB splitter) that is not powered. In a few rare instances, the USB port on your computer may not have enough power. Try using a USB hub with its own external power supply. If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information. Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the telephone base or charger. If it does not fix the problem, do the following (in the order listed):

1. 2. 3. 4. 5. 6. Disconnect the power to the telephone base. Disconnect the cordless handset battery. Wait a few minutes. Connect power to the telephone base. Remove the battery. Replace the battery and place the cordless handset into the telephone base or charger. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. 120 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords. 121 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this users manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. afety information Read and understand all instructions in the users manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments may include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;

etc.); a leak of natural gas; etc. Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, see the Troubleshooting section on pages 112-

120 of this users manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 128-129. Do not open this product except as directed in your users manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. Replace batteries only as described in your users manual (pages 9-10). Do not burn or puncture batteries they contain caustic chemicals. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. Caution: Use only the power adapters provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 122 Appendix Important safety information Especially about cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 (800) 8-BATTERY for locations accepting spent Ni-MH batteries. 123 Appendix Important safety information recautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

acemaker patients Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base. Especially about telephone answering systems Two-way recording: This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation. AVE THEE INTRUCTION 124 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada The device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. This product meets the applicable Industry Canada technical specifications. 125 Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B) 126 Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries before proceeding. 2. While you press and hold

/HANDET LOCATOR, plug the telephone base power adapter back to the power outlet. 3. After about 20 seconds, when the IN UE light starts flashing, release

/HANDET LOCATOR and then press it again within two seconds. The process takes up to one minute to complete. When the phone successfully enters the CEC battery charging testing mode, the IN UE light turns off and all handsets display To register H, see manual. You hear a confirmation tone. When the phone fails to enter this mode, repeat the steps above. Note: The telephone base will be powered up as normal if you fail to press within two seconds in Step 3.

/HANDET LOCATOR To deactivate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet, then plug it back in. The telephone base is powered up as normal. 2. Register the handsets back to the telephone base. See pages 103-104 for handset registration instructions. BC 127 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 1. What does this limited warranty cover?

The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (CONSUMER or you) that the product and all accessories provided in the sales package (PRODUCT) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. 2. What will be done if the RODUCT is not free from defects in materials and workmanship during the limited warranty period (materially defective RODUCT)?

During the limited warranty period, the manufacturers authorized service representative will repair or replace at the manufacturers option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturers option, is your exclusive remedy. The manufacturer will return repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. 3. How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer. 4. What is not covered by this limited warranty?

This limited warranty does not cover:

PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or PRODUCT returned without valid proof of purchase (see item 6 on next page); or Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 128 Appendix Limited warranty 5. How do you get warranty service?

To obtain warranty service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. NOTE: Before calling for service, please review the users manual; a check of the PRODUCTs controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 6. What must you return with the RODUCT to get warranty service?

You must:

Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the PRODUCT purchased

(PRODUCT model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturers responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. lease retain your original sales receipt as proof of purchase. 129 Appendix Technical specifications RF frequency band 1921.536MHz - 1928.448MHz Channels Operating temperature Telephone base voltage

(AC voltage, 60Hz) Telephone base voltage

(AC adapter output) Handset battery Charger voltage

(AC adapter output) 5 32F - 122F 0C - 50C 96Vrms - 130Vrms 6VDC @ 400mA 2.4V 400mAh, 2xAAA Ni-MH 6VAC @ 300mA Operation Talk time (cordless handset) Operating time*

Up to 7 hours Talk time (cordless handset speakerphone) Up to 5 hours Standby Up to 7 days

* Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This is achieved through a unique antenna design and advances in noise-filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in range competitions against similarly equipped phones of the leading competition. Now calls can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset, the weather, and the construction of your home or office. Redefining long range coverage and clarity This telephone base comes with an antenna which gives much better clarity and covers a longer range than before. HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio. It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio. imulated full-duplex handset and base speakerphones The simulated full-duplex speakerphones on your handset and telephone base allow both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage. 130 Index Index A Alert tones handset, 107 telephone base, 107 Announcement, 80 Answer an incoming call during an intercom call, 48 during PTT, 56 Answering calls, 34 Answering system, 8099 Assign a speed dial number, 65 Auto off, 35 B Battery charging, 10 Battery installation, 9 Blind transfer, 43 C Call block block calls without number, 79 delete entries, 79 edit entries, 78 new entries, 7576 review entries, 77 Call transfer, 49 Caller ID (CID) add entries to call block list, 7778 add entries to phone directory, 73 delete entries, 72 dial entries, 72 review entries, 71 Caller ID announce handset, 17 telephone base, 28 Chain dialing, 4142 Charger installation, 8 Clear voicemail indication handset, 19 telephone base, 30 Clock handset, 15 telephone base, 26 D Day and time handset, 15 telephone base, 26 Delete a call block entry, 79 a caller ID log entry, 72 a directory entry, 63 a speed dial number, 67 Dialing from a record in the caller ID log, 72 from the directory, 63 Directory dial a number, 63 edit entries, 64 name search, 62 new entries, 59 Display dial, 63 DSL, 3, 8 E Elapsed time, 34 Ending a call, 35 H Handset handset locator, 45 131 Index Index quick reference guide, 13 ringer tone, 14 ringer volume, 14 screen icons, 106 temporary ringer silencing, 35 voicemail indicator, 19 HD audio, 130 I Important safety information, 122123 Installation, 712 Intercom, 4649 L Last number redial, 36 LCD language, 16, 27 reset LCD language, 16, 27 Lights, 108 Limited warranty, 128129 M Maintenance, 121 Make an outgoing call during PTT, 57 Making calls, 34 Memory match, 70 Message alert tone, 88 counter display, 100 playback, 9497 Mute, 40 N Names enter into directory, 76 search, 62 Number of rings, 86 O On-hook dialing (predialing), 34 Outgoing announcement, 80 Paging tone, 45 Phonebook, 58 Power adapter, 8 Predialing, 34 Push-to-talk, 5057 Q Quick reference guide, 16 R Reassign a speed dial number, 66 Receiving calls, 34 Recharging, 10 Redial, 3637 Remote access, 101102 Ringer silencing, 35 Ring tone options handset, 14 telephone base, 25 Safety information, 122124 Screen display message, 109111 Speed dial delete a number, 67 edit a number, 66 enter a number, 65 132 Index Index T Technical specifications, 130 Telephone base quick reference guide, 46 ringer tone, 25 ringer volume, 25 screen icons, 106 voicemail indicator, 29 Temporary ringer silencing, 35 Time handset, 15 telephone base, 26 Troubleshooting, 112120 V Visual message waiting indicator handset, 18 telephone base, 29 Voice announce caller ID telephone base, 28 Voice guide, 10, 84 Voicemail, 18, 29, 90 quick access, 66 Voice prompts, 92 Volume control handset, 14, 39, 95 telephone base, 25, 39, 95 W Wall mount installation, 11 Warranty, 128129 133 Remote access wallet card Use the wallet card below to help you remember commands to control your answering system from any touch-tone telephone. Cut along dotted line. Call your phone number, then enter your two-digit access code (preset to 19). Remote command Action Play all messages ..................1 Play new messages ...............2 Delete the message ..............3 Delete all old messages .....33 Repeat or go back .................4 Stop ...............................................5 Help menu .................................*5 Skip the message ...................6 Record announcement ........*7 End remote access call ......8 (or hang up) Turn system off or on ..........0 Models: CL83214/CL83314/CL83414 Type: DECT 6.0 cordless telephone/answering system with DECT 6.0 cordless telephone/answering system with caller ID/call waiting 2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Fold here. www.telephones.att.com 2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 1.0 AT&T 02/14.

		frequency	equipment class	purpose
1	2014-03-18	1921.536 ~ 1928.448	PUE - Part 15 Unlicensed PCS portable Tx held to ear	Original Equipment
2		1921.536 ~ 1928.448	PUB - Part 15 Unlicensed PCS Base Station

Application Forms

app s	Applicant Information
1 2	Effective	2014-03-18
1 2	Applicant's complete, legal business name	VTech Telecommunications Ltd
1 2	FCC Registration Number (FRN)	0015973951
1 2	Physical Address	23/F Tai Ping Ind Center Block 1
1 2		Tai Po NT, N/A
1 2		Hong Kong

app s	TCB Information
1 2	TCB Application Email Address	b******@baclcorp.com
1 2	TCB Scope	A3: Unlicensed Personal Communication System (PCS) devices

app s	FCC ID
1 2	Grantee Code	EW7
1 2	Equipment Product Code	80-9454-00

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	M** T******
1 2	Title	Approbation Supervisor
1 2	Telephone Number	852-2********
1 2	Fax Number	852-2********
1 2	E-mail	m******@vtech.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	05/02/2014
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	PUE - Part 15 Unlicensed PCS portable Tx held to ear
1 2	Equipment Class	PUB - Part 15 Unlicensed PCS Base Station
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	DECT 6.0 Cordless Telephone
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head configurations. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR for head is < 0.10 W/kg.
1 2	Grant Comments	Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	Bay Area Compliance Laboratory Corp. (Shenzhen)
1 2	Name	J**** C****
1 2	Telephone Number	08675******** Extension:
1 2	Fax Number	08675********
1 2	E-mail	j******@baclcorp.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15D	68	1921.53600000	1928.44800000	0.1100000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15D	68	1921.53600000	1928.44800000	0.0885000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BFIR-K1-310 Shenzhen Tuoxingyuan Technology Co., Ltd 2A9JD-GS500 Shenzhen Jingyun Wulian Technology CO.,Ltd 2A9JD-S320B Shenzhen Jingyun Wulian Technology CO.,Ltd 2A5PJ-LM135D Dongguan Dareu Electronics Audio Co., LTD 2AH25T1731 Shanghai Sunmi Technology Co.,Ltd.