Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. Congratulations on purchasing your new VTech product. Before using this camera, please read Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, visit www.vtechcanada.com. Requirements Make sure your system includes the following components, and they meet the minimum requirement. Smartphones/tablets mobile communication. Android or iOS devices with 3G/4G Android 4.4 or later; or iOS 8.0 or later. Network Wi-Fi router Wi-Fi 2.4GHz IEEE 802.11 b/g/n Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per camera Video codec H.264 Micro SD card
(optional) Support Class 4 or higher, with storage capacity up to 64GB Whats in the box Overview Your camera package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. x 2 x 2 1 set for VC9511 or VC9511-11 2 sets for VC9511-2 or VC9511-21 3 sets for VC9511-3 Installation guide Quick start guide Important safety instructions 1 2 3 4 6 7 7 8 9 10 11 12 ON/OFF switch Antenna Connect to router with Wi-Fi. Speaker Caution For hearing protection, do not stand close to the HD camera when the cameras alarm goes off. The loud alarm may damage your hearing. Power jack Threaded socket Pair button Press and hold for 3 seconds to enter pairing mode. Press and hold for 20 seconds to reset the camera settings to factory default. 1 2 3 4 5 6 micro SD card slot Microphone Infrared LEDs Allow you to see clearly in a dark surrounding. Light sensor Wide-angle camera lens LED indicators Flash orange and blue alternately when the camera unit is in pairing mode. Orange is steady on when the camera unit is connecting to the Internet. Orange and blue are steady on when the camera unit is idle. Flash orange and blue slowly during video streaming. Flash orange and blue quickly and alternately when the camera unit is updating its firmware. You can turn off the camera units LEDs if you find them too bright. Read the Online LED Indication section under Camera settings in the online app manual for instructions. 5 8 9 10 11 12 Protect your privacy and online security 1 Connect and power on the camera How the system works The Wi-Fi router (not included) provides Internet connectivity to your camera. It serves as a communicating channel between your camera and MyVTech Cams mobile app, allowing you to monitor and/or control your camera through the app wherever you are. VTech cares about your privacy and peace of mind. Thats why weve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips. Ensure your wireless connection is secure. Before installing a device, ensure your routers wireless signal is encrypted by selecting the WPA2-PSK with AES setting in your routers wireless security menu. Change default settings. Change your wireless routers default wireless network name
(SSID) to something unique. Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network. For more information on wireless connections and protecting your data, please review the following resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely https://www.consumer.ftc.gov/articles/0382-using-ip-
cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security http://www.wi-fi.org/discover-wi-fi/security. 2. Slide the ON/OFF switch leftward to power on your camera. 3. Place the camera unit at a desired place. 1. Connect the power adapter to the camera unit and a power supply. Use only the power adapter(s) supplied with this product. Make sure the camera is not connected to an electric outlet that is controlled by a switch. Connect the power adapter in a vertical or floor mount position only. The adapters prongs are not designed to hold the weight of the camera unit, so do not connect it to any ceiling, under-the-
table, or cabinet outlet. Otherwise, the adapter may not properly connect to the outlet. Make sure the camera unit and the power adapter cord are out of reach of children. Connect the camera Wi-Fi connection Before you connect the camera unit, make sure you have Internet access and a Wi-Fi router
(IEEE 802.11 b/g/n). Charges apply and service plan may vary for Internet access. Router is not included. To maintain compliance with the FCCs RF exposure guidelines, place the camera unit at least 20cm from nearby persons. Slide the ON/OFF switch rightward to power off your camera. VC9511VC9511-2VC9511-3VC9511-11VC9511-21Full HD Pan & Tilt Camerawith AlarmInstallation guideFrequencyCamera unit: 2412 - 2462 MHzChannels11Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.Power requirementCamera unit power adapter:Output: 5V DC 1500mAGoogle Play and the Google Play logo are trademarks of Google LLC.App Store is a trademark of Apple Inc., registered in the U.S. and other countries.Specifications are subject to change without notice. 2018 VTech Communications, Inc.All rights reserved. 10/18. VC9511X-X_IG_V2.0Document order number: 91-011552-020-100Technical specifications 2 Set up camera Insert micro sd card
(Optional) mount the camera unit (optional) After you have connected the HD camera, refer to the Quick start guide included in your package to set up your camera. Install MyVTech Cams mobile app Camera setup:
Create camera account Add camera 3 test the location for camera Before you install your camera unit, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. You can use your mobile devices Wi-Fi signal strength indicator to assist in checking. Once you have identified the suitable location, you can install your camera unit. Adjust the distance between your camera unit and the Wi-Fi router if needed. Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your mobile device. Check with your mobile device again. Your camera can capture videos of the monitoring area when motion is detected. The videos will be automatically saved in the cameras internal memory*. You can choose to save the videos to a micro SD card. NOTENote NOTES Your camera unit supports Class 4 or higher micro SD card, with storage capacity up to 64GB. Prior to inserting or ejecting the micro SD card installed in your camera, the camera must be powered off. To power off, slide the switch rightward. ON/OFF
*The camera can store approximately 160 events, based on 10-second video clips at 720p HD resolution. Total number of events will increase or decrease based on the video resolution selected. Pair new camera General product care You can add or replace any cameras. The Wireless Monitoring family includes cameras VC931, VC9411 and VC9511, which can be purchased separately. They can be paired to your camera account with the MyVTech Cams mobile app, for example, you can have a combination of VC931, VC9411 and VC9511. You can pair a maximum of 10 cameras to your camera account. For more details, refer to the online app manuals of VC931, VC9411 and VC9511 in the Help page of the mobile app. To keep this product working well and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the camera unit in water and do not clean it under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the camera unit is dry before you connect it to the mains again. Storage When you are not going to use the camera for some time, store the camera unit and the adapter in a cool and dry place. NOTENotes NOTES Check for reception strength and camera angle before drilling the holes. The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your camera units. 1. Place the wall mount bracket on a wall and then use a pencil to mark the top and the bottom holes as shown. Remove the wall mount bracket and drill two holes in the wall
(7/32 inch drill bit). 2. If you drill the holes into a stud, go to step 3. If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are flush with the wall. 3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole. 4. Place the camera unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the camera unit. 3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed. 5. You can maximize your camera units viewing angles by tilting the wall mount bracket. Hold the camera unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your camera unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle. OR 4. Place the camera unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the camera unit. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place. Frequently asked questions Below are the questions most frequently asked about the camera. If you cannot find the answer to your question in the below table, visit our website at www.vtechphones.com, or call 1-844-848-8324
(1-844-84-VTECH) for customer service. In Canada, go to www.vtechcanada.com or call 1-888-211-2005. The LEDs on the camera are too bright. Can I turn them off?
Why does camera not respond normally?
You can turn off the LEDs of your camera. Read the LED online indicator section under Camera settings in the online app manual for instructions. Try the following (in the order listed) for common cure:
1. Disconnect the power to the camera unit. 2. Wait a few minutes before connecting power back to the camera unit. 3. Turn on the HD camera. 4. Run the mobile app again. Why is my screen in black and white?
Why does my camera show offline? Why is the connection lost every now and then?
The camera has a light sensor that measures the ambient light. When the ambient light is dim, such as during nighttime or in a dark room, the camera activates its infrared LEDs, and displays the camera view in black and white. The camera unit may lose the Internet connection. Check your network and the router setting. Other electronic products may cause interference with your camera. Try installing your camera as far away from these electronic devices as possible. Limited warranty What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?
During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 on the following part); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1-844-848-8324 (1-844-84-VTECH). In Canada, go to www.vtechcanada.com or call 1-888-211-2005. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and 2. Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. VC9511 VC9511-2 VC9511-3 VC9511-11 VC9511-21 Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. This camera is intended as an aid. It is not a substitute for home security supervision and should not be used as such. 4. This product is not intended for use as a medical monitor. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter: Output: 5V DC 1500mA. 7. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet. 8. For pluggable equipment, the socket-outlet
(power adapter) shall be installed near the equipment and shall be easily accessible. 9. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 10. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 11. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 12. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 13. Do not overload wall outlets or use an extension cord. 14. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 15. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 16. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 17. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 18. You should test the sound reception every time you turn on the units or move one of the components. 19. Periodically examine all components for damage. 20. Be aware of possible loss of privacy while using public airwaves. Conversations may be picked up by other nursery monitors, cordless phones, scanners, etc. 21. Children should be supervised to ensure that they do not play with the product. 22. The small parts of this camera can be swallowed by babies or small children. Keep these parts out of reach of children. 23. The product is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions Use and store the product at a temperature between 32oF and 104oF. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. Other electronic products may cause interference with your camera. Try installing your camera as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. FCC and IC regulations FCC Part 15 NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The camera unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B) Industry Canada This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RF radiation exposure statement The camera unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The camera unit should be installed and operated with a minimum distance of 8 in (20 cm) between the main unit and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-247 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. For cETL compliance only Mesures de scurit importantes Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base afin de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent:
1. Observez toutes les instructions et mises en garde inscrites sur lappareil. 2. Linstallation par un adulte est requise. 3. Ce moniteur rsidentiel est conu titre daide seulement. Il ne remplace pas les systmes de surveillance rsidentiels et ne doit pas tre utilis comme tel. 4. Ce produit nest pas conu pour tre utilis en tant que moniteur mdical. 5. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. 6. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. Adaptateur secteur de la camra :
Sortie : 5 V CC 1500 mA. 7. Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. 8. Pour les appareils raccords, la prise de courant
(de ladaptateur secteur) doit tre installe prs de lquipement et doit tre facilement accessible. 9. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. 10. Ne coupez pas les cordons dalimentation pour remplacer les fiches, car ceci peut prsenter un danger potentiel. 11. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. 12. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. 13. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. 14. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. 15. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. 16. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. 17. Afin de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. 18. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. 19. Examinez les composantes afin de vrifier si celles-
ci ne sont pas endommages. 20. Soyez avis de la perte de la confidentialit lorsque vous utilisez les ondes publiques. Les conversations peuvent tre entendues par dautres moniteurs de bb, des tlphones sans fil, des scanneurs, etc. 21. Les enfants devraient tre superviss afin de vous assurer quils ne jouent pas avec lappareil. 22. Les petites pices de ce moniteur peuvent tre avales par les bbs ou les petits enfants. Veuillez tenir ces pices hors de porte des enfants. 23. Le produit nest pas conu pour tre utilis par des personnes (incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn suffisamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde Utilisez et entreposez le produit une temprature entre 0 C (32F) et 40C (104 F). Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. Dautres produits lectroniques peuvent causer des interfrences auprs de votre camra. Essayez dinstaller votre camra le plus loin possible de ces dispositifs lectroniques : routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs de pices, tlviseurs, ordinateurs personnels, appareils lectriques de cuisine et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil):
Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:
Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. Champs lectromagntiques (EMF) Ce produit de VTech est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. 2018 VTech Communications, Inc. All rights reserved. 10/18. VC9511-X_II_V2.0 Document order number: 96-012374-020-100