all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.32 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 4.32 MiB |
Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. VM3251 VM3251-2 Video Monitor with Adjustable Lens BC Congratulations Install the battery on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Whats in the box The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, make sure you use both battery and AC power at the same time. With the battery alone, the parent unit can cordlessly run for a short time only. NOTES Use only the battery supplied with this product. The operating time for using the rechargeable battery is short. If you want to monitor your baby for a long time, we recommend you connect the parent unit to AC power. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. Install the battery as shown below. Connect and charge the battery NOTES Use only the power adapters supplied with this product. Make sure the electrical outlets are not controlled by wall switches. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Connect the baby monitor NOTES Make sure the label THIS SIDE UP is facing up while inserting the battery. 1 set for VM3251 2 sets for VM3251-2 Users manual 6 7 8 9 10 11 12 13 14 While in a menu, press to choose the next item on the left, or return to the main menu. While in SINGLE-CAM and PATROL mode, press and hold to move the zoomed image leftward. While in a menu, press to choose the next item on the right, or return to the main menu. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image rightward. On/off Press and hold to power on. Press and hold again to power off. TALK While viewing image, press and hold to talk to the selected baby unit. PATROL Press to turn on or off the PATROL mode. LCD ON/OFF Press to turn on or off the LCD screen. Speaker Power jack Battery compartment cover Stand Parent unit lights LINK On when the parent unit is linked to the baby unit. Flashes quickly when the link to the baby unit is nearly lost. Flashes when the link to at least one of the baby units is lost. On when the parent unit is connected to AC power, or the battery is charging. Flashes when the parent unit battery is low and needs charging. Off when the parent unit is disconnected from AC power. TALK On when the parent unit is talking to the baby unit. On when the speaker volume of the parent unit is turned off. Parent unit status icons Connection status or displays when strong signal strength is detected between the baby unit and the parent unit. or displays when moderate or low signal strength is detected between the baby unit and the parent unit. displays when the link between the baby unit and the parent unit is lost. Patrol mode Displays when the parent unit is in PATROL mode. or or or Current view status Displays the number of the baby unit that is being viewed when in SINGLE-CAM or PATROL mode. Zoom Displays when the camera at the baby unit has zoomed in. Night vision Displays when the baby unit being viewed has activated the night vision feature. Replace the battery To replace the battery, pull out the battery compartment cover, and then lift up the battery. Follow the steps above to install the new battery. Lullaby Displays when a lullaby is playing. Talkback Displays when talking back to the baby unit from parent unit. Mute alert Displays when the parent unit speaker volume is set to off. or Real-time temperature Displays the real-time temperature detected by the baby unit in Fahrenheit (oF) or Celcius (oC)
(e.g. 57 oF or 14 oC). Battery status animates when the battery is charging. displays solid when the battery is fully charged. displays when the battery is low and needs charging. AC power without battery Displays when the parent unit is connected to AC power without the battery. Speaker volume Displays the parent unit speaker volume level while adjusting. Parent unit main menu icons Brightness You can change the brightness of the parent unit screen. Pairing baby unit The baby unit and parent unit provided are already paired. You can add or replace baby units
(VM3211, purchased separately) to your baby monitor system. Unpairing baby unit You can remove the paired baby unit. LCD screen off timer You can set a specific time to screen off your parent unit. Parent unit overview a b c d e f g h m n LCD display Zoom While viewing image, press to zoom in or out. CAM Press to resume video streaming while in MENU. While in a menu, press to scroll up, or to enter an items sub-menu. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image upward. Turn up the volume when the speaker is on. While in a menu, press to scroll down. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image downward. Turn down the volume when the speaker is on. MENU/SELECT Press to enter/exit the menu. While in a sub-menu, press to choose an item, or save a setting. i j k l 1 2 3 4 5 Temperature You can turn on the Temperature alert tone so that the parent unit beeps whenever the room temperature detected by the baby unit falls outside of the desired temperature range. Lullaby You can set the baby unit lullaby playback parameters. Parent unit warning icons and messages
/No link to Camera The selected baby unit is out of range or is turned off.
/Battery low at Parent Unit The battery is empty and needs to be recharged. Pairing or unpairing is completed. Camera switching, pairing or unpairing is in progress. Camera switching, pairing or unpairing is failed.
/Temperature too high or
/Temperature too low The temperature detected by the baby unit is higher/lower than the desired temperature alert range. or or or or The baby unit is unpairing from the parent unit. The parent unit is searching for baby units.
* # represents the selected baby unit number. Turn on or off the parent unit screen You can turn on or off the parent unit screen without powering off the parent unit. You can still hear sound from the baby unit. Press LCD ON/OFF on the parent unit to turn off the screen. Press any key on the parent unit to turn on the screen again. Adjust speaker volume For parent unit:
Press +/VOL/- on the parent unit at any time when viewing images. NOTE When the parent unit speaker volume is set to zero, light turns on. appears on the screen and the For baby unit:
The baby unit speaker volume determines the talkback volume transmitted from your parent unit. Press +/VOLUME/- on the baby unit to adjust the speaker volume. Charge the parent unit battery When you have connected the parent unit and installed its battery for the first time or after power outage, the parent unit powers on automatically. The battery icon indicates the battery status (see the following table). NOTES The parent unit battery is fully charged after 3 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery. Battery indicators The battery icon is off and displays. The screen displays Battery low at Parent Unit and The flashes. light light The battery icon becomes solid
. Battery status No battery is installed but operates using AC power, or the battery has been installed incorrectly. The battery has very little charge and may be used for only a short time. The battery is fully charged. Action Install the parent unit battery. Charge without interruption
(at least 30 minutes). Charge without interruption
(about 30 minutes). To keep the battery charged, connect it to AC power when not in use. Using the baby monitor Power on or off the baby unit ON/OFF switch to the left to Slide the turn on the baby unit. The ON/OFF LED light turns on. Slide the turn off the baby unit. The ON/OFF LED light turns off. ON/OFF switch to the right to Power on or off the parent unit to turn on the parent unit. Press and hold The screen turns on. Press and hold parent unit. The screen turns off. again to turn off the Before use NOTES This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. Test your baby monitor You may test the baby monitor before initial use, and at regular times thereafter. CAUTION For hearing protection, make sure the parent unit is more than 1 meter (3 feet) away from both baby units. If you hear any high-pitched noise, move the parent unit further until the noise stops. You can also press -/VOL on the parent unit to lower or mute the noise.
> 1m (3ft) 1. 2. 3. Make sure your baby units and parent unit are on. The parent unit displays images from the baby unit. Speak towards the microphone of the baby unit. You will hear the sound at the parent unit. If you have more than one baby unit, press VIEW at the right side of your parent unit. The screen switches to other baby units. Then, repeat step 2. or No link to NOTES When the parent unit displays Camera, and the LINK LED light flashes, move the parent unit closer to the baby unit (observe the minimum distance of 1 meter/ 3 feet). You can also check if the baby monitor is connected to a live power socket and switched on. TIP Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby units. Adjust LCD brightness You can change the brightness of the parent unit screen from Level 1 to Level 5. The LCD brightness is preset to Level 3. 1. 2. 3. Press MENU when the parent unit is idle. Press
. to choose Press to choose the desired level of brightness, then press SELECT to confirm your selection.
, then press or or Monitoring mode Every time the parent unit is turned on, it displays a baby unit in SINGLE-CAM mode. If there are more than one baby units in your system, you can also monitor your baby in PATROL mode. SINGLE-CAM The screen displays a single baby unit in full screen. A single cam view that transits to a different baby unit every 10 seconds. PATROL In SINGLE-CAM mode and PATROL mode:
Press CAM to switch to another camera if you are in SINGLE-CAM mode. 63 Press CAM . Positioning the baby monitor CAUTION Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the babys crib or playpen. NOTE To avoid interference from other electronic devices, place your baby monitor far away from devices such as wireless routers, microwaves, cell phones and computers. 1. Place the baby unit more than 1 meter
(3 feet) away from your baby.
> 1m (3ft) Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. Overview Baby unit overview 2. Place the parent unit more than 1 meter(3 feets) away from the baby unit. 63 63 More than 1 meter
(3 feet) Less than 1 meter
(3 feet) 3. Rotate to adjust the angle of the camera on the baby unit according to your preference. f g CAUTION The default volume of your parent unit is level 4. If you experience high-pitched screeching noise from your baby monitor while positioning:
-
Make sure your baby units and parent unit are more than 1 meter (3 feet) apart, OR Turn down the volume of your parent unit.
-
a b c d e h i j k l Press PATROL to switch to PATROL mode if you are in SINGLE-CAM mode, and vice versa. Monitor the temperature Your baby unit monitors the temperature of your babys room with its built-in temperature sensor. If the detected temperature is out of the preset temperature range, the parent unit will display an alert message. 63 Press PATROL. Zoom You can remotely zoom in while viewing images in SINGLE-CAM and PATROL mode. 4. 5. to zoom in. Press again to zoom to move the zoomed image Press out. Press leftward or rightward. or Talk You can use the TALK function of the parent unit to comfort your baby in SINGLE-CAM and PATROL mode. 1. 2. 3. Press and hold TALK on the parent unit. The TALK light turns on. Speak towards the microphone on the parent unit. Your voice is broadcast to the baby unit. Release the TALK key to stop the broadcast. The TALK light goes off. Set temperature range You can set the desired room temperature alert range. The minimum temperature can be set between 52 oF (11 oC) and 69 oF (20 oC). The maximum temperature can be set between 70 oF (21 oC) and 86 oF (30 oC). 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press SELECT. Press press SELECT. Press minimum or maximum temperature, then press SELECT to confirm your selection.
, then press
, then press to choose to choose to choose the desired to choose or or
, then or or or Temperature alert tone You can turn on the temperature alert tone so that the parent unit will emit an alert tone if the detected temperature is out of range. 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press SELECT. Press press SELECT to confirm your selection.
, then press
, then press to choose to choose to choose or or
, then or or 4. Temperature format You can choose to display the temperature in Fahrenheit (oF) or Celcius (oC). 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press SELECT. Press press SELECT to confirm your selection.
, then press
, then press to choose to choose to choose or or
, then or or 4. 1 2 3 4 5 6 7 8 9 10 11 12 Light sensor Camera Infrared LEDs
-/VOLUME/+
Press to adjust the speaker volume. It determines the talkback volume transmitted from your parent unit. Microphone ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is not being viewed; or when the link to the parent unit is lost. ON/OFF switch Slide to turn on or off the baby unit. Temperature sensor Speaker Power Jack For wall mount installation use. Threaded socket PAIR Your baby units and parent unit provided are already paired. Press and hold on accessory baby units (VM3211, purchased separately) to pair to the parent unit. Night vision The baby unit has infrared LEDs that allow you to see your baby clearly at night or in a dark room. When the baby unit being viewed detects low light levels, the infrared LEDs are switched on automatically. The images from this baby unit is in black and white, and appears on screen. NOTES It is normal if you see a short white glare on your parent unit screen as the baby unit is adapting to the dark environment. When the infrared LEDs are on, the image is in black and white. This is normal due to external light sources. TIP Depending on the surroundings and other interfering factors, like lightings, objects, colors and backgrounds, the display resolution may vary. Adjust the baby units angle or place the baby unit at a higher level to prevent glare and blurry display. Set screen off timer of parent unit You can set the screen off timer of the parent unit, so that the parent unit screen will turn off automatically after being idle for a particular time interval. 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press or
). Press SELECT to confirm your selection. to choose to choose select (
, then press or or 4.
,
,
, Pair and replace extra new baby unit (VM) You can add or replace any baby units (VM3211 purchased separately) to your video and audio monitor system. You can pair a maximum of four baby units to your parent unit. 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press camera (
Press SELECT to confirm your selection. to choose to choose select a empty
, then press or or or
). 4.
,
, Lullaby You can play lullabies on the baby unit by remoting on the parent unit. On the baby unit, you can control the volume level of the lullabies. Playing lullabies 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press to choose to choose a lullaby, or choose
, then press or or to stop playing. 4. Press SELECT to confirm your selection. Remove a paired baby unit (VM) You can unpair baby unit from your video and audio monitor system. 1. 2. 3. Press MENU when the parent unit is idle. Press
. Press you want to unpair (
Press SELECT. Press SELECT again to select confirm your selection. to choose to choose select the camera
, then press or or 4. 5. or to
).
,
, For C_UL compliance only Mesures de scurit importantes Afin de rduire les risques dincendie, de blessures corporelles ou dlectrocution, suivez toujours ces mesures prventives de base lorsque vous utilisez votre tlphone :
1. Lisez et comprenez bien toutes les instructions. Observez toutes les instructions et mises en garde inscrites sur lappareil. Dbranchez ce tlphone de la prise murale avant de le nettoyer. Nutilisez pas de nettoyeurs liquides ni en arosol. Nutilisez quun chiffon doux et lgrement humect. Nutilisez pas ce produit prs de leau, tel que prs dun bain, dun lavabo, dun vier de cuisine, dun bac de lavage ou dune piscine, ou dans un sous-sol humide ou sous la douche. Ne dposez pas ce tlphone sur un chariot, support ou table chancelants. Lappareil pourrait tomber et tre srieusement endommag. vitez dinstaller le systme tlphonique dans les endroits soumis une temprature extrme, la lumire directe du soleil ou proximit immdiate dautres appareils lectriques ou lectroniques. Protgez votre tlphone contre les sources dhumidit, la poussire, les vapeurs et les liquides corrosifs. Le botier de lappareil est dot de fentes et douvertures daration situes larrire ou en dessous. Afin dempcher la surchauffe, ces ouvertures ne doivent pas tre obstrues en plaant lappareil sur un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil proximit dun lment de chauffage ni dune plinthe lectrique. De plus, ne linstallez pas dans une unit murale ou un cabinet ferm qui ne possde pas daration adquate. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur les tiquettes de lappareil. Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur dlectricit. Ne dposez rien sur le cordon dalimentation. Installez cet appareil dans un endroit scuritaire, l o personne ne pourra trbucher sur la ligne dalimentation ni le cordon tlphonique modulaire. Ninsrez jamais dobjets travers les fentes et ouvertures de cet appareil, car ils 2. 3. 4. 5. 6. 7. 8. 9. 10. Volume level control on baby unit Press VOL+ to increase the volume level of the lullaby on the baby unit. Press VOL- to decrease the volume level of the lullaby on the baby unit. NOTES Once the lullabies are played, the setting will be applied to all registered baby units. The lullaby playback on the baby unit will be stopped when the broadcast from the parents unit is playing. The lullabies will resume in several seconds after the broadcast is ended. pourraient toucher des points de tension dangereux ou court-circuiter des pices, ce qui constituerait un risque dincendie ou dlectrocution. Nchappez pas de liquides dans lappareil. Afin de rduire les risques dlectrocution, ne dmontez pas lappareil, mais apportez-
le plutt un centre de service qualifi sil doit tre rpar. En enlevant le couvercle, vous vous exposez des tensions dangereuses ou autres dangers similaires. Un remontage inadquat peut tre lorigine dune lectrocution lors dune utilisation ultrieure de lappareil. Dbranchez lappareil avant de procder au nettoyage. Utilisez un chiffon humide et doux. Ne surchargez pas les prises de courant et les rallonges. Dbranchez cet appareil de la prise de courant et communiquez avec le dpartement de service la clientle de VTech dans les cas suivants:
11. 12. 13. Lorsque le cordon dalimentation est endommag ou corch. Si du liquide a t chapp dans lappareil. Si lappareil a t expos une source dhumidit telle que la pluie ou leau. Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Rglez uniquement les commandes indiques dans le les instructions de fonctionnement. Les rglages incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail exhaustif de la part dun technicien autoris afin de rtablir le fonctionnement normal de lappareil. Si le produit a t chapp et que le socle et/ou le combin a t endommag. Si le produit affiche une nette diminution de sa performance. 14. vitez dutiliser un tlphone (autre quun sans fil) pendant un orage. Les clairs peuvent tre lorigine dune lectrocution. 15. Nutilisez pas le tlphone pour rapporter une fuite de gaz proximit de la fuite. En certaines circonstances, une flammche pourrait tre provoque lorsque ladaptateur est branch une prise de courant, ou lorsque le combin est dpos sur le socle. Ceci est un vnement commun associ la fermeture dun circuit lectrique. Lutilisateur ne devrait pas brancher le tlphone une prise de courant, et ne General product care To keep this product working well and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit and parent unit are dry before you connect them to the mains again. Storage When you are not going to use the baby monitor for some time, remove the rechargeable battery from the parent unit. Store the parent unit, the baby unit and the adapters in a cool and dry place. Frequently asked questions Below are the questions most frequently asked about the baby monitor. If you cannot find the answer to your question, visit our website at www.vtechphones.com, or contact 1 (800) 595-9511 for customer service. Why does the baby monitor not respond normally?
Try the following (in the order listed) for common cure:
1. Disconnect the power to the baby units and the parent unit. 2. Remove the batteries in the parent unit. Then install the batteries again. 3. Wait a few seconds before connecting power back to the baby units and the parent unit. 4. Turn on the baby units and the parent unit. 5. Wait for the parent unit to synchronize with the baby units. Allow up to one minute for this to take place. devrait pas dposer le combin charg sur le socle, si le tlphone se trouve proximit dun endroit comportant des concentrations de gaz inflammables, moins que la ventilation soit adquate. Une flammche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre: des endroits o lon utilise de loxygne mdical sans ventilation adquate; des gaz industriels (dissolvants de nettoyage, des vapeurs dessence, etc.); une fuite de gaz naturel, etc. 16. Ne placez que le combin de votre tlphone prs de votre oreille lorsquen mode de conversation. 17. Ces adaptateurs ont t conus pour tre orients en position verticale ou monts au sol. Les broches ne sont pas conues pour maintenir ladaptateur en place si celui-ci est barnch dans une prise au plafond ou sous une table/ armoire. CONSERVEZ CES INSTRUCTIONS Pile MISE EN GARDE : Nutilisez que la pile incluse. Ne jetez pas la pile au feu. Vrifiez les instructions spcifiques de mise aux rebus auprs des autorits locales. Nouvrez pas et ne mutilez pas la pile. Llectrolyte qui sen chapperait est corrosif et pourrait causer des brlures ou des blessures aux yeux ou la peau. Llectrolyte est toxique si aval. Soyez prudents lorsque vous manipulez les piles afin dviter les courts-circuits provoqus par des matriaux conducteurs. Rechargez la pile incluse avec cet appareil, selon les instructions et limites spcifies dans ce guide dutilisation. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (sapplique uniquement aux tlphones numriques sans fil):
Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:
Avis aux dtenteurs de stimulateurs cardiaques Why dont the power-on light of the baby unit and parent unit go on when I switch on the units?
Perhaps the parent unit is not connected to the power. Insert the appliance plug into the parent unit and put the adapter in a wall socket. Then press and hold to switch on the parent unit and to establish connection with the baby unit. The ON/OFF light on the baby unit flashes and the parent unit displays
. Perhaps the baby unit is not connected to the power. Connect the baby unit to the mains. Then set the ON/OFF switch to ON to switch on the baby unit and to establish connection with the parent unit. Make sure the power is not controlled by a wall switch. Make sure the battery is installed. You may have used the battery for a long time. Replace a new battery. The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal due to external light sources. During night-time or in a dark room, the surroundings and other interfering factors, like lightings, objects, colors and backgrounds may affect the image quality on your parent unit screen. Adjust the baby units angle or place the baby unit at a higher level to prevent glare and blurry display. The parent unit and baby units may be too close to each other. Move the parent unit away from the baby units until the noise stops; OR Turn down the volume of your parent unit. Why doesnt my parent unit charge while connected to AC power?
Why is my screen in black and white?
Why do I get glare or blurry display on my screen when viewing my baby at night?
Why does the baby monitor produce a high-pitched noise?
The baby unit is unpaired from the parent unit. Follow below steps to pair the baby unit. Make sure both parent unit and baby unit are on before pairing. 1. Press MENU when the parent unit is idle. or Press then press Press or empty baby unit slot (
to choose
. to choose an
,
,
, or
), then press SELECT. The parent unit screen displays
. Immediately press and hold PAIR on the bottom of the baby unit. The LED light flashes quickly. 2. 3. 4. When pairing is successful, the screen displays
, followed the view of the newly paired baby unit in SINGLE-CAM mode. The LED light on the new baby unit remains on. Try the pairing If pairing fails, the screen displays process again. Only one baby unit can be paired at a time. Why dont I hear a sound/Why cant I hear my baby cry?
Why cant I establish a connection?
Why is the connection lost every now and then? Why are there sound interruptions?
The parent unit speaker volume may be too low or off. Press VOL+
to increase the volume. The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible. Why does the parent unit beep?
The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). If the parent unit is powered by the provided battery, it may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit for up to 3 hours. The temperature of your babys room may be too high or too low. Ils doivent tenir le tlphone sans fil une distance dau moins six pouces du stimulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ils doivent utiliser le tlphone sans fil en lappuyant sur loreille qui se trouve dans la direction oppose au stimulateur cardiaque. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent un tlphone sans fil proximit de ceux-ci. adquate entre la pile et le chargeur. Les bloc-piles rechargeables lhydrure mtallique de nickel: Jetez ces blocs-piles de manire cologique et scuritaire. Ne les incinrez pas et ne les percez pas. Tel que les autres piles de ce type, elles pourraient dgager une matire toxique qui peut causer des blessures corporelles si elles sont brles ou perces. propos des tlphones sans fil Alimentation lectrique: Les mmes caractristiques qui constituent des avantages pour les tlphones sans fil affichent galement des restrictions. Les appels tlphoniques sont transmis entre le combin sans fil et le socle par le biais dondes radio ; il y a donc la possibilit que vos conversations tlphoniques sans fil soient interceptes par des quipements de rception radio se trouvant dans la porte du combin sans fil. Pour cette raison, vous ne devez pas percevoir les communications tlphoniques sans fil comme tant aussi confidentielles. Alimentation lectrique: Le socle de ce tlphone sans fil doit tre branch une prise lectrique fonctionnelle. La prise lectrique ne doit pas tre contrle par un interrupteur mural. Les appels ne pourront pas tre effectus du combin sans fil si le socle est dbranch ou mis hors tension ou si le courant est coup. Possibilit dinterfrences aux tlviseurs: Certains tlphones sans fil fonctionnent sur des frquences pouvant causer des interfrences aux tlviseurs et aux magntoscopes. Pour rduire ou prvenir de telles interfrences, ne placez pas le socle du tlphone sans fil prs ou sur un tlviseur ou magntoscope. Sil y a prsence de parasites, il est conseill dloigner le tlphone sans fil du tlviseur ou du magntoscope afin de rduire possiblement les interfrences. Piles rechargeables: Manipulez les piles avec soin afin de ne pas les court-circuiter avec des bagues, bracelets ou cls. Les piles ou le conducteur peut surchauffer et causer des blessures. Respectez la polarit Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Follow all warnings and instructions marked on the product. Adult setup is required. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the parent unit. Use only the supplied rechargeable battery or replacement battery pack (BT198555/
BT298555) for the parent unit. Do not dispose of batteries in a fire. They may explode. Dispose of used battery according to the information in The RBRC seal. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Baby unit power adapter: Output: 6V DC 500mA Parent unit power adapter: Output: 6V DC 500mA. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Unplug the power cords before replacing batteries. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. Do not overload wall outlets or use an extension cord. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this aujourdhui. Limited warranty What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?
During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Cana-
dian requirement:
CAN ICES-3 (B)/NMB-3(B) Industry Canada This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. RF radiation exposure statement The baby unit complies with FCC RF radiation expo-
sure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging. Cautions 1. 2. 3. 4. 5. Use and store the product at a temperature between 32oF and 104oF. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. Batteries should not be exposed to excessive heat such as bright sunshine or fire. Make sure the baby unit(s) and the adapter cord(s) are always out of reach of the baby, at least 3 feet away from the baby or crib, to avoid a possible strangulation hazard. Never place the baby unit(s) inside the babys crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket. 6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible:
wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. The RBRC seal The RBRC seal on the Ni-MH battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used Ni-MH batteries into the Ni-MH batteries into the batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Ni-MH Ni-MH battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC and 1 (800) 8 BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
Technical specifications Frequency control Transmit frequency Crystal controlled PLL synthesizer Baby unit: 2405 - 2475 MHz Parent unit: 2405 - 2475 MHz Channels 32 LCD Nominal effective range Power requirements 2.8 Color LCD
(WQVGA 320x240 pixel) Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Parent unit: 3.6V Ni-MH battery Baby unit power adapter:
Output: 6V DC @ 500mA Parent unit power adapter:
Output: 6V DC @ 500mA are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. 18. 19. 20. 21. 22. 23. 24. product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. You should test the sound reception every time you turn on the units or move one of the components. Periodically examine all components for damage. Be aware of possible loss of privacy while using public airwaves. Conversations may be picked up by other nursery monitors, cordless phones, scanners, etc. Children should be supervised to ensure that they do not play with the product. The product is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase
(see item 2 on the next page); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. 2. 3. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There Specifications are subject to change without notice. 2016 VTech Communications, Inc. All rights reserved. 11/16. VM3251-X_CIB_V1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-11-30 | 2405 ~ 2475 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-11-30
|
||||
1 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 | FCC Registration Number (FRN) |
0015973951
|
||||
1 | Physical Address |
23/F Tai Ping Ind Center Block 1
|
||||
1 |
Tai Po NT, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
EW7
|
||||
1 | Equipment Product Code |
80-0617-01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** T********
|
||||
1 | Title |
Approbation Supervisor
|
||||
1 | Telephone Number |
852-2********
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
W****** I**** K********
|
||||
1 | Physical Address |
Workshop No. 3, G/F., World-Wide Industrial Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
w******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
W****** I****** K****
|
||||
1 | Physical Address |
Workshop No. 3, G/F., World-Wide Industrial Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
w******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Monitor - Parent Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | The output power listed is conducted. This device must transmit with a source-based time-averaging duty factor as described in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be informed of the operating requirements for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
J****** H******
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85278********
|
||||
1 |
j******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2405.00000000 | 2475.00000000 | 0.0800000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC