Manual of bluetooth car charger BH269A Thanks for purchasing our bluetooth Car charger with FM transmitter! This manual is written to help you to learn how to use the product. Please read the manual carefully before use. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. I. Product Profile This product is a car-specific car bluetooth player, built-in advanced bluetooth and WMA.MP3, APE, FLAC decoder chip, can play music files inside U disk, wirelessly transmitted to car audio, no need to modify your car can easily Make your music enjoy while driving. More important is the purity and clarity of the special sound of DSP technology. We hope to bring you unlimited enjoyment of the music. 11. Short press the colorful light button to switch/long press the LED breathing mode 12. Subwoofer sound button 13. Cigarette point and shrapnel II. Product appearance Schematic description:
1. PD3.0 output 2. USB1: 2.4A/U disk 3. LED display 4. Short press: Previous/Long press to enter mode switching (BT/USB/TF) 5. Play / pause / answer / call back / Long press to wake-up SIRI / Left and right rotation to adjust the volume 6. Short press: next song / long press to enter FM mode 7. MIC 8. USB2: 2.4A 9. LED lampshade 10. TF card slot III. Features:
1. Suitable for all types of vehicles 2. LED display 3. Support PD3.0 fast charge output 4. Support USB Type-C/PD3.0/Huawei FCP/SCP/Samsung AFC/QC3.0/
QC2.0/iPhone 2.4A/USB BC1.2 DCP protocol complied 5. Support stereo FM transmission technology 6. Support U disk play 7. Support TF card music player 8. Support WMA, MP3, WAV, APE, FLAC music format files. 9. Automatic power off memory function 10. bluetooth supports A2DP, AVRCP, HFP, HSP 11. bluetooth bluetooth V5.0 12. bluetooth hands-free calling 13. Support bluetooth stereo music DSP technology 14. Support subwoofer output 15. Car battery voltage detection IV. Operation Instructions 4.1.1 Plug the product into car cigarette lighter socket while it will be automatically power on with LED flashing and displaying HIBattery VoltageBTFM frequency 4.1.2 Turn on your car FM radio, and adjust the frequency of product same as your car radio, then your can enjoy music from your car stereo. 4.1.3 Adjust FM frequency Long press Then press to adjust the frequency from the FM 88.1 to 107.9Mhz, three seconds without operation to exit the FM state. to enter state, and 4.2 bluetooth Pairing When connecting the product with the mobile phone at the first time, it may need pin code to finish the connection, for more details, please refer to the relevant manual. 1.Please open bluetooth on your mobile phone and search for the device Carkit from phone menu list. the car audio through FM. 2. Select the device "Carkit"
3. Select "Carkit" in the menu of the phone, and select device as "Trust device" in the authorized device. V. Matching connection of additional equipment At boot time, the bluetooth car hands-free will only automatically start connecting to the matching device that was last connected. Note: Some phones can be connected automatically when reconnected, and some phones may need to be granted permissions. You can set it to "Automatically connect." For more information, please refer to the phone's user manual. 5.1 Using bluetooth Hands-free Call
(When your bluetooth hands-free is idle or playing music) 5.1.1 Making a call In the connected state, the phone number is directly dialed out by the mobile phone, and the voice is automatically sent from the car audio speaker. 5.1.2 Answering the call In the connected state, when a call is coming, press directly up. to answer, once more press to hang 5.1.3Rejecting calls When a call is coming but you don't want to answer it, press and hold to reject. 5.2 Redial the phone When the bluetooth hands-free is idle, double press to redial the last number. 5.3 Playing music stored on your phone This product supports A2DP function, which can play the music stored in the mobile phone and transmit to button to switch the mode: BT -- USB 5.4 Mobile music / TF / U disk Mode Long press
-- TF. After connecting the bluetooth, select the song to play or insert the TF/U disk to automatically read and play the music. 6 Siri / voice assistant After the bluetooth pairing connection, when you want to use the Siri/Voice Assistant, press and hold 3
" button to activate (the supported mobile seconds phone brands are: iPhone, Samsung, native Android system mobile phone). Note: Some phones do not support this feature. 7.EQ subwoofer output Press EQ button to enter subwoofer output, press again to cancel(Default audio output is normal) 8.Rainbow LED function to change the RGB light to Short press green/red/blue/yellow/cyan/purple/white/shut-off, long press to enter the breathe mode,the device has color memory function after shut off VI. Tech specification Rated working voltage Limit working voltage PD output power Working temperature Music format SNR Battery voltage display accuracy PD3.0 output USB1&USB2 bluetooth version bluetooth sound processing 12V~24V 10-26V 18W 0-50 MP3 / WMA / WAV/ APE
/ FLAC
>60dB Error0.5V 5V/3A 9V/2A 12/1.5A Total 5V/2.4A Version 5.0 DSP and A2DP(Advance Audio Distribution Profile) FM Transmission distance Effective distance of bluetooth microphone FM frequency Transmit FM mode 10M 0.5-2 M 88.1-107.9MHz Stereo digital PLL lock frequency VII. Notice 1. Do not turn the radio volume too high (usually 18 or below) to avoid the increase of the sound back noise. 2. Although the transmission power of this product is relatively strong, better to skip the Frequency with strong signal in local to get a better sound quality 3.Do not use this product in a dusty and humid environment with extremely high and low temperatures. 4. Do not drop the product to avoid surface damage or breakdown. 5. Do not disassemble the product,if you have any questions, please contact your dealer. 6. Due to continuous improvement and enhancement of technology,changes in product performance and functionality are subject to change without notice. VIII. Troubleshooting Power is not responding or not displayed Can't play 1. Check if the machine is in good contact with the cigarette port, and the cigarette holder is not seriously rusted. 2. Unplug and re-try again 3. Check if the cigarette holder is powered normally 1. Check if the USB device is connected to the player or not, or you can try another USB device. 2. Please make sure that there is copy of the file in the USB device that can be supported by the product. 3. Please make sure the volume is not set to 0 There is noise but no sound 1. Whether the product player is in a pause state 2. Is the volume adjusted to 0 or small?
The audio of car can't receive sound The launching effect is not good, there is noise 1. Make sure that the product FM launch has been turned on. 2. Is the transmission frequency of the product the same as the reception frequency of cars?
1. Make sure that there is no strong signal station at the frequency of the current transmission. When using it, adjust to the frequency of no radio station to get better sound effect. IX. Packaging 1. Main device 2. User Manual