User Manual Model: SS-RT Brand: Silent Safaris FCC ID: S7FSS-RT Connect your media devices to the transmitter by using the cable with 3.5mm audio plug. And sounds will send to the transmitter through the audio cable. Then press the key of transmitter at a short time for switching channel, keep your wireless headset and FM transmitter at the same frequency. The wireless headset will receive the music. You can enjoy your digital music with all sound and convenience. Specification:
Operation Voltage3.7V Operation Current42mA Transmitting Power8dBm Operation Frequency 915, 917MHZ ModulationFM Charge Voltage5.0V Charge Voltage200mA Charge Time1-2 hours/(200mA) I. Press Key Power on by press the Power SW for a second, Power off by press key for a second After startup, press the key at a short time for switching channel , and the device acquiesce in 1 channel (915MHz) with green indicator. Press the key at a short time for changing to 2 channel917MHzwith red indicator If there is no input signalafter 5 seconds the device will auto power off you should power on the device own. Only the input signal larger than 60mVp-p, the transmitter can identify the signal. Otherwise the recognition is no signal. II. Charge The USB plug is used for charging When no starting charging, red light flashing. After startup charging, the light is blinking; When the battery is full ,it will return to its original state of work instructions IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:
1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.